Linux version 2.6.30-rc3-git5-vanilla-jbarnespatch (root@cannibal) (gcc version 4.3.3 (Debian 4.3.3-8) ) #7 SMP PREEMPT Tue May 5 23:52:35 CEST 2009 Command line: BOOT_IMAGE=/vmlinuz-2.6.30-rc3-git5-vanilla-jbarnespatch root=/dev/mapper/cannibal-root ro quiet i915.modeset=1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7d6b0 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 07E000000 mask FFE000000 uncachable 1 base 000000000 mask F80000000 write-back 2 base 07D700000 mask FFFF00000 uncachable 3 base 07D800000 mask FFF800000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009d800 (usable) modified: 000000000009d800 - 00000000000a0000 (reserved) modified: 00000000000d2000 - 00000000000d4000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007d6b0000 (usable) modified: 000000007d6b0000 - 000000007d6cc000 (ACPI data) modified: 000000007d6cc000 - 000000007d700000 (ACPI NVS) modified: 000000007d700000 - 000000007e000000 (reserved) modified: 00000000f0000000 - 00000000f4000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed00000 - 00000000fed00400 (reserved) modified: 00000000fed14000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed90000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-000000007d6b0000 0000000000 - 007d600000 page 2M 007d600000 - 007d6b0000 page 4k kernel direct mapping tables up to 7d6b0000 @ 8000-c000 RAMDISK: 37ba3000 - 37fef84e ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO) ACPI: XSDT 000000007d6bb77f 00094 (v01 LENOVO TP-7L 00002190 LTP 00000000) ACPI: FACP 000000007d6bb900 000F4 (v03 LENOVO TP-7L 00002190 LNVO 00000001) ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 0/32 [20090320] ACPI Warning (tbfadt-0562): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20090320] ACPI: DSDT 000000007d6bbd1d 0FED1 (v01 LENOVO TP-7L 00002190 MSFT 03000000) ACPI: FACS 000000007d6e4000 00040 ACPI: SSDT 000000007d6bbab4 00269 (v01 LENOVO TP-7L 00002190 MSFT 03000000) ACPI: ECDT 000000007d6cbbee 00052 (v01 LENOVO TP-7L 00002190 LNVO 00000001) ACPI: TCPA 000000007d6cbc40 00032 (v02 LENOVO TP-7L 00002190 LNVO 00000001) ACPI: APIC 000000007d6cbc72 00068 (v01 LENOVO TP-7L 00002190 LNVO 00000001) ACPI: MCFG 000000007d6cbcda 0003C (v01 LENOVO TP-7L 00002190 LNVO 00000001) ACPI: HPET 000000007d6cbd16 00038 (v01 LENOVO TP-7L 00002190 LNVO 00000001) ACPI: SLIC 000000007d6cbdf0 00176 (v01 LENOVO TP-7L 00002190 LTP 00000000) ACPI: BOOT 000000007d6cbf66 00028 (v01 LENOVO TP-7L 00002190 LTP 00000001) ACPI: ASF! 000000007d6cbf8e 00072 (v16 LENOVO TP-7L 00002190 PTL 00000001) ACPI: SSDT 000000007d6e271b 0025F (v01 LENOVO TP-7L 00002190 INTL 20050513) ACPI: SSDT 000000007d6e297a 000A6 (v01 LENOVO TP-7L 00002190 INTL 20050513) ACPI: SSDT 000000007d6e2a20 004F7 (v01 LENOVO TP-7L 00002190 INTL 20050513) ACPI: SSDT 000000007d6e2f17 001D8 (v01 LENOVO TP-7L 00002190 INTL 20050513) ACPI: DMI detected: Lenovo ThinkPad T61 ACPI: Added _OSI(Linux) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 007d6b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000964a98] TEXT DATA BSS ==> [0000200000 - 0000964a98] #3 [0037ba3000 - 0037fef84e] RAMDISK ==> [0037ba3000 - 0037fef84e] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #5 [0000965000 - 0000965194] BRK ==> [0000965000 - 0000965194] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009d 0: 0x00000100 -> 0x0007d6b0 On node 0 totalpages: 513608 DMA zone: 56 pages used for memmap DMA zone: 1995 pages reserved DMA zone: 1941 pages, LIFO batch:0 DMA32 zone: 6968 pages used for memmap DMA32 zone: 502648 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880001010000, static data 73668 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504589 Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.30-rc3-git5-vanilla-jbarnespatch root=/dev/mapper/cannibal-root ro quiet i915.modeset=1 Initializing CPU#0 Preemptible RCU implementation. NR_IRQS:4352 nr_irqs:424 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2394.183 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2009632k/2054848k available (4680k kernel code, 416k absent, 44080k reserved, 2024k data, 404k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.36 BogoMIPS (lpj=2394183) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.74 BogoMIPS (lpj=2393870) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 396768 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (9576.10 BogoMIPS). net_namespace: 1424 bytes regulator: core version 0.5 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] pci 0000:15:00.1: supports D1 D2 pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.1: PME# disabled pci 0000:15:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff] pci 0000:15:00.2: supports D1 D2 pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.2: PME# disabled pci 0000:15:00.3: reg 10 32bit mmio: [0xf8301c00-0xf8301cff] pci 0000:15:00.3: supports D1 D2 pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.3: PME# disabled pci 0000:15:00.4: reg 10 32bit mmio: [0xf8302000-0xf83020ff] pci 0000:15:00.4: supports D1 D2 pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: reg 10 32bit mmio: [0xf8302400-0xf83024ff] pci 0000:15:00.5: supports D1 D2 pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.5: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x7000-0xafff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded CacheFiles: Loaded Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7dffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x5000-0x5fff pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.4: IO window: 0x6000-0x6fff pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x007000-0x0070ff pci 0000:15:00.0: IO window: 0x007400-0x0074ff pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x7000-0xafff pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 21 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 23 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 alloc irq_desc for 16 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff] pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff] pci_bus 0000:04: resource 2 pref mem [0xdfb00000-0xdfbfffff] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff] pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff] pci_bus 0000:05: resource 2 pref mem [0xdf800000-0xdf8fffff] pci_bus 0000:0d: resource 0 io: [0x6000-0x6fff] pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff] pci_bus 0000:0d: resource 2 pref mem [0xdf500000-0xdf5fffff] pci_bus 0000:15: resource 0 io: [0x7000-0xafff] pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff] pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff] pci_bus 0000:15: resource 3 io: [0x00-0xffff] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:16: resource 0 io: [0x7000-0x70ff] pci_bus 0000:16: resource 1 io: [0x7400-0x74ff] pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 4402k freed Simple Boot Flag at 0x35 set to 0x1 Scanning for low memory corruption every 60 seconds VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) DLM (built May 5 2009 02:10:20) installed fuse init (API version 7.11) msgmni has been set to 3935 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device alloc irq_desc for 24 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 25 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 27 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 28 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 ACPI: AC Adapter [AC] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] ACPI: SSDT 000000007d6e1b32 00306 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 000000007d6e1ebd 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 000000007d6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 000000007d6e1e38 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (55 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (52 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 29 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 i915 0000:00:02.0: irq 29 for MSI/MSI-X [drm:i915_driver_irq_postinstall] *ERROR* wrote IER (0x20a0): 0x00020053 [drm:i915_load_modeset_init] *ERROR* installed IRQ handler, IER (00x20a0): 0x00020053, PCI CMD: 0x0407 ACPI: Battery Slot [BAT0] (battery present) allocated 1280x800 fb: 0x007df000, bo ffff88007bf30b40 [drm] LVDS-8: set mode 1280x800 f Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device registered panic notifier acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c00-0x1c07 Probing IDE interface ide0... hda: MATSHITADVD-RAM UJ-852, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 30 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ahci 0000:00:1f.2: irq 30 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 30 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 30 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 31 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 e1000e 0000:00:19.0: irq 31 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:74:85:16 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-rc3-git5-vanilla-jbarnespatch ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 alloc irq_desc for 19 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-rc3-git5-vanilla-jbarnespatch ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-rc3-git5-vanilla-jbarnespatch uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-rc3-git5-vanilla-jbarnespatch uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-rc3-git5-vanilla-jbarnespatch uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected alloc irq_desc for 17 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.30-rc3-git5-vanilla-jbarnespatch uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 alloc irq_desc for 18 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.30-rc3-git5-vanilla-jbarnespatch uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded EDAC MC: Ver: 2.1.0 May 5 2009 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.19. HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-7: ST9100821AS, 3.CMC, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3: SATA link down (SStatus 0 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA ST9100821AS 3.CM PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 ALSA device list: #0: HDA Intel at 0xfe020000 irq 17 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 SCTP: Hash tables configured (established 65536 bind 65536) drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 404k freed hdaps: inverting axis (3) readings. hdaps: LENOVO ThinkPad T61 detected. input: hdaps as /devices/platform/hdaps/input/input6 hdaps: driver successfully loaded. thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7LETB9WW (2.19 ), EC 7KHT24WW-1.08 thinkpad_acpi: Lenovo ThinkPad T61, model 64659UU thinkpad_acpi: ACPI backlight control delay disabled thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... thinkpad_acpi: procfs hotkey enable/disable: access by process with PID 1351 thinkpad_acpi: Please remove the hotkey=enable module parameter, it is deprecated. Hotkeys are always enabled thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /devices/virtual/input/input7 usb 2-1: new high speed USB device using ehci_hcd and address 2 Clocksource tsc unstable (delta = -319427252 ns) ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 usb 2-1: New USB device found, idVendor=041e, idProduct=4058 usb 2-1: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 2-1: Manufacturer: Creative Labs usb 2-1: configuration #1 chosen from 1 choice usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: BCM2045B usb 3-1: Manufacturer: Broadcom Corp usb 3-1: configuration #1 chosen from 1 choice EXT4-fs: barriers enabled kjournald2 starting: pid 2600, dev dm-0:8, commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-0 with ordered data mode usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: New USB device found, idVendor=0483, idProduct=2016 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Biometric Coprocessor usb 3-2: Manufacturer: STMicroelectronics usb 3-2: configuration #1 chosen from 1 choice usb 5-2: new low speed USB device using uhci_hcd and address 2 usb 5-2: New USB device found, idVendor=046d, idProduct=c521 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: USB Receiver usb 5-2: Manufacturer: Logitech usb 5-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input9 generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input10 generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 udev: starting version 141 rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x04b8, PCI irq 16 yenta_cardbus 0000:15:00.0: Socket status: 30000006 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device (041e:4058) input: UVC Camera (041e:4058) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels alloc irq_desc for 32 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input12 hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x00dba000 EXT4 FS on dm-0, internal journal on dm-0:8 EXT4-fs: barriers enabled kjournald2 starting: pid 4215, dev sda1:8, commit interval 5 seconds EXT4 FS on sda1, internal journal on sda1:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda1 with ordered data mode EXT4-fs: barriers enabled kjournald2 starting: pid 4216, dev dm-2:8, commit interval 5 seconds EXT4 FS on dm-2, internal journal on dm-2:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-2 with ordered data mode Adding 3756024k swap on /dev/mapper/cannibal-swap_1. Priority:-1 extents:1 across:3756024k input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input13 e1000e 0000:00:19.0: irq 31 for MSI/MSI-X e1000e 0000:00:19.0: irq 31 for MSI/MSI-X iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.57.2.23 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX