Linux version 2.6.30-rc7-00080-gcc82102 (thomas@artin) (gcc version 4.4.0 20090505 (prerelease) (GCC) ) #30 SMP PREEMPT Wed May 27 10:23:15 CEST 2009 Command line: root=/dev/artin/arch64 cryptdevice=/dev/sda6:lvm_pv ro resume=/dev/mapper/artin-swap KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) BIOS-e820: 000000007f6e0000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7f6e0 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007f6e0000 0000000000 - 007f600000 page 2M 007f600000 - 007f6e0000 page 4k kernel direct mapping tables up to 7f6e0000 @ 8000-c000 RAMDISK: 37df0000 - 37fef68a ACPI: RSDP 00000000000f6720 00024 (v02 LENOVO) ACPI: XSDT 000000007f6e67c6 00094 (v01 LENOVO TP-63 00000060 LTP 00000000) ACPI: FACP 000000007f6ecbc4 000F4 (v03 INTEL TP-63 00000060 ALAN 00000001) ACPI: DSDT 000000007f6e85b5 0459B (v01 LENOVO TP-63 00000060 INTL 20060608) ACPI: FACS 000000007f6edfc0 00040 ACPI: APIC 000000007f6eccb8 00068 (v01 INTEL TP-63 00000060 LOHR 0000005A) ACPI: HPET 000000007f6ecd20 00038 (v01 INTEL TP-63 00000060 LOHR 0000005A) ACPI: MCFG 000000007f6ecd58 0003C (v01 INTEL TP-63 00000060 LOHR 0000005A) ACPI: TCPA 000000007f6ecd94 00032 (v01 Phoeni TP-63 00000060 TL 00000000) ACPI: SLIC 000000007f6ecdc6 00176 (v01 LENOVO TP-63 00000060 TBD 00000001) ACPI: DBGP 000000007f6ecf3c 00034 (v01 LENOVO TP-63 00000060 LOHR 00000000) ACPI: APIC 000000007f6ecf70 00068 (v01 PTLTD TP-63 00000060 LTP 00000000) ACPI: BOOT 000000007f6ecfd8 00028 (v01 PTLTD TP-63 00000060 LTP 00000001) ACPI: SSDT 000000007f6e7f66 0064F (v01 SataRe SataPri 00001000 INTL 20050624) ACPI: SSDT 000000007f6e78d4 00692 (v01 SataRe SataSec 00001000 INTL 20050624) ACPI: SSDT 000000007f6e6e08 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 000000007f6e6d62 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) ACPI: SSDT 000000007f6e685a 00508 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 007f6e0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00006a2f9c] TEXT DATA BSS ==> [0000200000 - 00006a2f9c] #3 [0037df0000 - 0037fef68a] RAMDISK ==> [0037df0000 - 0037fef68a] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [00006a3000 - 00006a31f8] BRK ==> [00006a3000 - 00006a31f8] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f6e0 On node 0 totalpages: 521855 DMA zone: 56 pages used for memmap DMA zone: 1287 pages reserved DMA zone: 2656 pages, LIFO batch:0 DMA32 zone: 7081 pages used for memmap DMA32 zone: 510775 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 00000000000e8000 PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880001010000, static data 70560 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513431 Kernel command line: root=/dev/artin/arch64 cryptdevice=/dev/sda6:lvm_pv ro resume=/dev/mapper/artin-swap Initializing CPU#0 NR_IRQS:320 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1728.923 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2047812k/2087808k available (2481k kernel code, 388k absent, 38896k reserved, 1003k data, 336k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.92 BogoMIPS (lpj=5763076) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3459.17 BogoMIPS (lpj=5763483) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6918.09 BogoMIPS). net_namespace: 1872 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1670 (mask 0003) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at ff2c (mask 0003) pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df] pci 0000:03:00.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff] pci 0000:03:00.0: PME# supported from D0 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xd0000000-0xd00fffff] pci 0000:05:01.0: reg 10 io port: [0x2000-0x20ff] pci 0000:05:01.0: reg 14 32bit mmio: [0xd0100000-0xd01000ff] pci 0000:05:01.0: supports D1 D2 pci 0000:05:01.0: PME# supported from D1 D2 D3hot D3cold pci 0000:05:01.0: PME# disabled pci 0000:05:04.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:05:04.0: supports D1 D2 pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:04.0: PME# disabled pci 0000:05:06.0: reg 10 32bit mmio: [0xd0100800-0xd0100fff] pci 0000:05:06.0: supports D1 D2 pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:06.0: PME# disabled pci 0000:05:06.1: reg 10 32bit mmio: [0xd0100400-0xd01004ff] pci 0000:05:06.1: supports D1 D2 pci 0000:05:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:06.1: PME# disabled pci 0000:05:06.2: reg 10 32bit mmio: [0xd0101000-0xd01010ff] pci 0000:05:06.2: supports D1 D2 pci 0000:05:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:06.2: PME# disabled pci 0000:05:06.3: reg 10 32bit mmio: [0xd0101400-0xd01014ff] pci 0000:05:06.3: supports D1 D2 pci 0000:05:06.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:06.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfe7f has been reserved system 00:06: ioport range 0xff00-0xff7f has been reserved system 00:07: ioport range 0x6a0-0x6af has been reserved system 00:07: ioport range 0x6b0-0x6ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xd0000000-0xd00fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:05:04.0: CardBus bridge, secondary bus 0000:06 pci 0000:05:04.0: IO window: 0x002400-0x0024ff pci 0000:05:04.0: IO window: 0x002800-0x0028ff pci 0000:05:04.0: PREFETCH window: 0x88000000-0x8bffffff pci 0000:05:04.0: MEM window: 0x8c000000-0x8fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0004 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:03: resource 1 mem: [0xd0000000-0xd00fffff] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] pci_bus 0000:05: resource 1 mem: [0xd0100000-0xd01fffff] pci_bus 0000:05: resource 2 pref mem [0x88000000-0x8bffffff] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:06: resource 0 io: [0x2400-0x24ff] pci_bus 0000:06: resource 1 io: [0x2800-0x28ff] pci_bus 0000:06: resource 2 pref mem [0x88000000-0x8bffffff] pci_bus 0000:06: resource 3 mem: [0x8c000000-0x8fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 2045k freed Simple Boot Flag at 0x36 set to 0x1 msgmni has been set to 4005 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 Linux agpgart interface v0.103 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 registered taskstats version 1 Freeing unused kernel memory: 336k freed agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 acpi device:07: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input1 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] TV-13: set mode NTSC 480i 0 allocated 1280x800 fb: 0x007df000, bo ffff88007e1476c0 Console: switching to colour frame buffer device 160x50 [drm] LVDS-8: set mode 1280x800 15 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 ata1.00: ATA-7: FUJITSU MHV2120BH PL, 0084002A, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0084 PQ: 0 ANSI: 5 ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HA01, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com PM: Starting manual resume from disk PM: Starting manual resume from disk EXT4-fs: barriers enabled EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-1 with ordered data mode kjournald2 starting: pid 654, dev dm-1:8, commit interval 5 seconds rtc_cmos 00:08: RTC can wake from S4 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs udev: starting version 141 ACPI: SSDT 000000007f6e75d4 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 000000007f6e7067 004E8 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 000000007f6e780c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 000000007f6e754f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] Clocksource tsc unstable (delta = -124587433 ns) ACPI: Invalid active0 threshold thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (49 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb intel_rng: FWH not detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected cfg80211: Calling CRDA to update world regulatory domain i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 8139too Fast Ethernet driver 0.9.28 8139too 0000:05:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 8139too 0000:05:01.0: setting latency timer to 64 eth0: RealTek RTL8139 at 0xffffc200210b6000, 00:0f:b0:d2:f1:f1, IRQ 21 eth0: Identified 8139 chip type 'RTL-8100B/8139D' udev: renamed network interface eth0 to lan Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 yenta_cardbus 0000:05:04.0: CardBus bridge found [17aa:2075] yenta_cardbus 0000:05:04.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:05:04.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:05:04.0: TI: mfunc 0x01111c12, devctl 0x44 cfg80211: Calling CRDA for country: DE uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) cfg80211: Regulatory domain changed to country: DE (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) yenta_cardbus 0000:05:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 yenta_cardbus 0000:05:04.0: Socket status: 30000006 pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09 yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff ohci1394 0000:05:06.0: enabling device (0000 -> 0002) ohci1394 0000:05:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci1394 0000:05:06.0: setting latency timer to 64 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[d0100800-d0100fff] Max Packet=[2048] IR/IT contexts=[4/4] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 sdhci-pci 0000:05:06.1: SDHCI controller found [1180:0822] (rev 19) sdhci-pci 0000:05:06.1: enabling device (0000 -> 0002) sdhci-pci 0000:05:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:05:06.1: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:05:06.1] using DMA iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2009 Intel Corporation iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:03:00.0: setting latency timer to 64 usb 2-2: new full speed USB device using uhci_hcd and address 2 iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:03:00.0: irq 26 for MSI/MSI-X input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 usb 2-2: configuration #1 chosen from 1 choice phy0: Selected rate control algorithm 'iwl-3945-rs' usb 4-2: new full speed USB device using uhci_hcd and address 2 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.5 usbcore: registered new interface driver btusb usb 4-2: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f71ab40d835] EXT4 FS on dm-1, internal journal on dm-1:8 kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with writeback data mode. EXT4-fs: barriers enabled kjournald2 starting: pid 3292, dev dm-4:8, commit interval 5 seconds EXT4 FS on dm-4, internal journal on dm-4:8 EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-4 with ordered data mode EXT4-fs: barriers enabled kjournald2 starting: pid 3293, dev dm-2:8, commit interval 5 seconds EXT4 FS on dm-2, internal journal on dm-2:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-2 with ordered data mode Adding 2097144k swap on /dev/mapper/artin-swap. Priority:-1 extents:1 across:2097144k platform microcode: firmware: requesting intel-ucode/06-0f-02 platform microcode: firmware: requesting intel-ucode/06-0f-02 Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated from revision 0x51 to 0x57, date = 2007-03-15 microcode: CPU1 updated from revision 0x51 to 0x57, date = 2007-03-15 Microcode Update Driver: v2.00 removed. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ACPI: EC: GPE storm detected, transactions will use polling mode iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX CE: hpet increasing min_delta_ns to 15000 nsec lan: link down Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 wlan0: direct probe to AP 00:19:a9:fd:93:9f try 1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 wlan0: direct probe to AP 00:19:a9:fd:93:9f try 2 wlan0: direct probe to AP 00:19:a9:fd:93:9f try 3 Bridge firewalling registered wlan0: direct probe to AP 00:19:a9:fd:93:9f timed out nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 wlan0: direct probe to AP 00:19:a9:fd:93:9f try 1 wlan0: direct probe to AP 00:19:a9:fd:93:9f try 1 wlan0: direct probe to AP 00:19:a9:fd:93:9f try 2 wlan0: direct probe to AP 00:19:a9:fd:93:9f try 3 wlan0: direct probe to AP 00:19:a9:fd:93:9f timed out Bluetooth: HIDP (Human Interface Emulation) ver 1.2 input: Bluetooth Travel Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/bluetooth/hci0/hci0:11/input7 generic-bluetooth 0005:046D:B002.0001: input,hidraw0: BLUETOOTH HID v48.09 Mouse [Bluetooth Travel Mouse] on 00:16:CF:F5:37:F5 wlan0: authenticate with AP 00:19:a9:fd:93:90 wlan0: authenticated wlan0: associate with AP 00:19:a9:fd:93:90 wlan0: RX AssocResp from 00:19:a9:fd:93:90 (capab=0x431 status=0 aid=1) wlan0: associated cfg80211: Calling CRDA for country: DE cfg80211: Current regulatory domain updated by AP to: DE (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0 CE: hpet increasing min_delta_ns to 22500 nsec [drm] TV-13: set mode NTSC 480i 0 [drm] TV-13: set mode NTSC 480i 0