This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.1.901 (1.6.2 RC 1) Release Date: 2009-5-8 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.28-11-generic i686 GeeXboX Current Operating System: Linux geexbox 2.6.30 #1 SMP PREEMPT Wed Jun 17 21:05:09 CEST 2009 i686 Build Date: 06 June 2009 11:09:40AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 17 21:25:08 2009 (II) Loader magic: 0x3da0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 4 (--) PCI:*(0@0:2:0) Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f1c0/8 (==) Using default built-in configuration (39 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default i810 Device 0" Driver "i810" EndSection Section "Screen" Identifier "Builtin Default i810 Screen 0" Device "Builtin Default i810 Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default i810 Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default i810 Screen 0" (1) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default i810 Device 0" (==) No monitor specified for screen "Builtin Default i810 Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (2) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (3) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/X11/fonts/misc, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 2.7.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "i810" (WW) Warning, couldn't open module i810 (II) UnloadModule: "i810" (EE) Failed to load module "i810" (module does not exist, 0) (II) LoadModule: "vesa" (WW) Warning, couldn't open module vesa (II) UnloadModule: "vesa" (EE) Failed to load module "vesa" (module does not exist, 0) (II) LoadModule: "fbdev" (WW) Warning, couldn't open module fbdev (II) UnloadModule: "fbdev" (EE) Failed to load module "fbdev" (module does not exist, 0) (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43 (--) intel(0): Chipset: "G45/G43" (--) intel(0): Linear framebuffer at 0xC0000000 (--) intel(0): IO registers at addr 0xD0000000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): Defaulting Virtual to 2048 2048 for i965. (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): Output HDMI-1 has no monitor section (II) intel(0): I2C bus "HDMIDDC_B" initialized. (II) intel(0): HDMI output 1 detected (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output HDMI-2 has no monitor section (II) intel(0): I2C bus "HDMIDDC_C" initialized. (II) intel(0): HDMI output 2 detected (EE) intel(0): vgaHWSaveFonts: vgaHWMapMem() failed (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): EDID vendor "SAM", prod id 511 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): EDID vendor "SAM", prod id 511 (II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0. (II) intel(0): Output VGA connected (II) intel(0): Output HDMI-1 disconnected (II) intel(0): Output HDMI-2 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output VGA using initial mode 1360x768 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 32764 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (890, 500) mm (**) intel(0): DPI set to (58, 104) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x38000020 (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000b00 to 0x18040b00 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 224256 total, 1 used (II) intel(0): I830CheckAvailableMemory: 897020 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xd0000000 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 50331648 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (EE) intel(0): vgaHWSaveFonts: vgaHWMapMem() failed