[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc3 (aschuring@neminis) (gcc version 4.3.3 (Debian 4.3.3-13) ) #15 PREEMPT Wed Jul 15 21:35:09 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0D0000000 mask FFC000000 write-combining [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002fff0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002fc00000 page 2M [ 0.000000] 002fc00000 - 002fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 2fff0000 @ 10000-15000 [ 0.000000] RAMDISK: 2fc4d000 - 2ffdf241 [ 0.000000] ACPI: RSDP 000fab70 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 2fff0000 0002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACP 2fff0030 00081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B) [ 0.000000] ACPI: DSDT 2fff0120 032D2 (v01 SiS 746 00000100 INTL 02002024) [ 0.000000] ACPI: FACS 2fff8000 00040 [ 0.000000] ACPI: APIC 2fff00c0 0005A (v01 AMIINT SiS740XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 767MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2fff0000 [ 0.000000] low ram: 0 - 2fff0000 [ 0.000000] node 0 low ram: 00000000 - 2fff0000 [ 0.000000] node 0 bootmap 00011000 - 00017000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 002fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 000158de8c] TEXT DATA BSS ==> [0001000000 - 000158de8c] [ 0.000000] #2 [002fc4d000 - 002ffdf241] RAMDISK ==> [002fc4d000 - 002ffdf241] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [000158e000 - 00015940c4] BRK ==> [000158e000 - 00015940c4] [ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #6 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002fff0 [ 0.000000] HighMem 0x0002fff0 -> 0x0002fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002fff0 [ 0.000000] On node 0 totalpages: 196479 [ 0.000000] free_area_init_node: node 0, pgdat c14aee60, node_mem_map c1595200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1504 pages used for memmap [ 0.000000] Normal zone: 190992 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194943 [ 0.000000] Kernel command line: root=UUID=6388def3-b3cd-4785-88c3-6b1ffbed6a9b ro selinux=1 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 769444k/786368k available (3392k kernel code, 16340k reserved, 1459k data, 316k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa5000 - 0xfffff000 ( 360 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf07f0000 - 0xff7fe000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) [ 0.000000] .init : 0xc14bf000 - 0xc150e000 ( 316 kB) [ 0.000000] .data : 0xc135039c - 0xc14bd388 (1459 kB) [ 0.000000] .text : 0xc1000000 - 0xc135039c (3392 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=c14b5000 soft=c14b6000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1837.158 MHz processor. [ 0.000871] Console: colour VGA+ 80x25 [ 0.000875] console [tty0] enabled [ 0.000920] Calibrating delay loop (skipped), value calculated using timer frequency.. 3674.31 BogoMIPS (lpj=7348632) [ 0.000939] Security Framework initialized [ 0.000948] SELinux: Initializing. [ 0.000966] SELinux: Starting in permissive mode [ 0.000974] Mount-cache hash table entries: 512 [ 0.001144] Initializing cgroup subsys ns [ 0.001149] Initializing cgroup subsys cpuacct [ 0.001152] Initializing cgroup subsys devices [ 0.001156] Initializing cgroup subsys freezer [ 0.001158] Initializing cgroup subsys net_cls [ 0.001170] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.001173] CPU: L2 Cache: 256K (64 bytes/line) [ 0.001177] mce: CPU supports 4 MCE banks [ 0.001197] CPU: mobile AMD Athlon(tm) XP-M (LV) 2200+ stepping 01 [ 0.001204] Checking 'hlt' instruction... OK. [ 0.016416] ACPI: Core revision 20090521 [ 0.022984] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064001] NET: Registered protocol family 16 [ 0.064001] ACPI: bus type pci registered [ 0.064001] PCI: Using configuration type 1 for base access [ 0.064810] bio: create slab at 0 [ 0.065388] ACPI: EC: Look up EC in DSDT [ 0.069951] ACPI: Interpreter enabled [ 0.069958] ACPI: (supports S0 S1 S4 S5) [ 0.069980] ACPI: Using IOAPIC for interrupt routing [ 0.074953] ACPI: Power Resource [URP1] (off) [ 0.074986] ACPI: Power Resource [URP2] (off) [ 0.075015] ACPI: Power Resource [FDDP] (off) [ 0.075045] ACPI: Power Resource [LPTP] (off) [ 0.075213] ACPI: No dock devices found. [ 0.075651] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.075753] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff] [ 0.075884] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.075928] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f] [ 0.075982] pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f] [ 0.076038] pci 0000:00:03.0: reg 10 32bit mmio: [0xcfffd000-0xcfffdfff] [ 0.076088] pci 0000:00:03.1: reg 10 32bit mmio: [0xcfffe000-0xcfffefff] [ 0.076148] pci 0000:00:03.2: reg 10 32bit mmio: [0xcffff000-0xcfffffff] [ 0.076191] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.076197] pci 0000:00:03.2: PME# disabled [ 0.076236] pci 0000:00:04.0: reg 10 io port: [0xdc00-0xdcff] [ 0.076244] pci 0000:00:04.0: reg 14 32bit mmio: [0xcfffc000-0xcfffcfff] [ 0.076268] pci 0000:00:04.0: reg 30 32bit mmio: [0xcffc0000-0xcffdffff] [ 0.076287] pci 0000:00:04.0: supports D1 D2 [ 0.076289] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.076294] pci 0000:00:04.0: PME# disabled [ 0.076336] pci 0000:00:0c.0: reg 10 io port: [0xd800-0xd81f] [ 0.076343] pci 0000:00:0c.0: reg 14 io port: [0xd400-0xd40f] [ 0.076351] pci 0000:00:0c.0: reg 18 io port: [0xd000-0xd00f] [ 0.076358] pci 0000:00:0c.0: reg 1c io port: [0xcc00-0xcc3f] [ 0.076389] pci 0000:00:0c.0: supports D2 [ 0.076454] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xc7ffffff] [ 0.076461] pci 0000:01:00.0: reg 14 io port: [0xa800-0xa8ff] [ 0.076468] pci 0000:01:00.0: reg 18 32bit mmio: [0xcfef0000-0xcfefffff] [ 0.076484] pci 0000:01:00.0: reg 30 32bit mmio: [0xcfec0000-0xcfedffff] [ 0.076504] pci 0000:01:00.0: supports D1 D2 [ 0.076532] pci 0000:01:00.1: reg 10 32bit mmio: [0xb8000000-0xbfffffff] [ 0.076539] pci 0000:01:00.1: reg 14 32bit mmio: [0xcfee0000-0xcfeeffff] [ 0.076570] pci 0000:01:00.1: supports D1 D2 [ 0.076612] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.076617] pci 0000:00:01.0: bridge 32bit mmio: [0xcfd00000-0xcfefffff] [ 0.076622] pci 0000:00:01.0: bridge 32bit mmio pref: [0xafa00000-0xcfbfffff] [ 0.076632] pci_bus 0000:00: on NUMA node 0 [ 0.076637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.085558] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.085678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.085789] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.085899] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.086007] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.086118] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.086228] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.086337] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.086768] SCSI subsystem initialized [ 0.086818] libata version 3.00 loaded. [ 0.087124] PCI: Using ACPI for IRQ routing [ 0.089236] pnp: PnP ACPI init [ 0.089275] ACPI: bus type pnp registered [ 0.092127] pnp: PnP ACPI: found 9 devices [ 0.092131] ACPI: ACPI bus type pnp unregistered [ 0.092150] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.092154] system 00:01: ioport range 0x295-0x296 has been reserved [ 0.092157] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.092161] system 00:01: ioport range 0x880-0x8ff has been reserved [ 0.092164] system 00:01: ioport range 0xc00-0xc1f has been reserved [ 0.092169] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.127273] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.127278] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.127286] pci 0000:00:01.0: MEM window: 0xcfd00000-0xcfefffff [ 0.127292] pci 0000:00:01.0: PREFETCH window: 0xafa00000-0xcfbfffff [ 0.127309] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.127313] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.127317] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.127320] pci_bus 0000:01: resource 1 mem: [0xcfd00000-0xcfefffff] [ 0.127323] pci_bus 0000:01: resource 2 pref mem [0xafa00000-0xcfbfffff] [ 0.127374] NET: Registered protocol family 2 [ 0.127488] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.128011] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.130332] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.130849] TCP: Hash tables configured (established 131072 bind 65536) [ 0.130853] TCP reno registered [ 0.130987] NET: Registered protocol family 1 [ 0.131110] Unpacking initramfs... [ 0.258219] Freeing initrd memory: 3656k freed [ 0.265512] audit: initializing netlink socket (disabled) [ 0.265541] type=2000 audit(1248090139.263:1): initialized [ 0.269165] VFS: Disk quotas dquot_6.5.2 [ 0.269290] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.269500] msgmni has been set to 1510 [ 0.269649] SELinux: Registering netfilter hooks [ 0.269907] alg: No test for stdrng (krng) [ 0.269919] io scheduler noop registered [ 0.270009] io scheduler cfq registered (default) [ 0.320003] pci 0000:01:00.0: Boot video device [ 0.324335] Linux agpgart interface v0.103 [ 0.324362] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746] [ 0.328881] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 [ 0.329039] [drm] Initialized drm 1.1.0 20060810 [ 0.329043] [drm] radeon default to kernel modesetting. [ 0.329045] [drm] radeon kernel modesetting enabled. [ 0.329101] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.334466] [drm] radeon: Initializing kernel modesetting. [ 0.334488] [drm] register mmio base: 0xCFEF0000 [ 0.334490] [drm] register mmio size: 65536 [ 0.334856] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 0.335025] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.335032] [drm] RAM width 64bits DDR [ 0.335040] [drm] Clocks initialized ! [ 0.335300] [drm] radeon: 1 pipes initialized. [ 0.335310] agpgart-sis 0000:00:00.0: AGP 3.0 bridge [ 0.335333] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode [ 0.335339] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover [ 0.348028] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode [ 0.348038] [drm] radeon: VRAM 128M [ 0.348040] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 0.348042] [drm] radeon: GTT 64M [ 0.348045] [drm] radeon: GTT from 0xD0000000 to 0xD3FFFFFF [ 0.501488] [drm] radeon: irq initialized. [ 0.501540] [TTM] TTM available graphics memory: 377 MiB [ 0.501542] [TTM] TTM available object memory: 377 MiB [ 0.501565] [drm] radeon: 128M of VRAM memory ready [ 0.501568] [drm] radeon: 64M of GTT memory ready. [ 0.501588] [drm] radeon: cp idle (0x10000C03) [ 0.501592] [drm] Loading R300 Microcode [ 0.513393] [drm] radeon: ring at 0x00000000D0000000 [ 0.513422] [drm] ring test succeeded in 1 usecs [ 0.525321] [drm] radeon: ib pool ready. [ 0.525445] [drm] ib test succeeded in 0 usecs [ 0.525790] [drm] Default TV standard: PAL [ 0.525793] [drm] 27.000000000 MHz TV ref clk [ 0.525797] [drm] DFP table revision: 3 [ 0.525946] [drm] Radeon Display Connectors [ 0.525948] [drm] Connector 0: [ 0.525950] [drm] VGA [ 0.525953] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 0.525955] [drm] Encoders: [ 0.525957] [drm] CRT1: INTERNAL_DAC1 [ 0.525959] [drm] Connector 1: [ 0.525961] [drm] DVI-I [ 0.525964] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 0.525965] [drm] Encoders: [ 0.525967] [drm] CRT2: INTERNAL_DAC2 [ 0.525969] [drm] DFP1: INTERNAL_TMDS1 [ 0.643971] Switched to high resolution mode on CPU 0 [ 0.927004] [drm] fb mappable at 0xC0040000 [ 0.927006] [drm] vram apper at 0xC0000000 [ 0.927008] [drm] size 8294400 [ 0.927010] [drm] fb depth is 24 [ 0.927012] [drm] pitch is 7680 [ 0.977763] [drm] DAC-5: set mode 1280x1024 2a [ 1.027716] [drm] TMDS-8: set mode 1920x1080 2b [ 1.051520] Console: switching to colour frame buffer device 160x64 [ 1.073554] fb0: radeondrmfb frame buffer device [ 1.073557] registered panic notifier [ 1.073561] [drm] radeon: kernel modesetting successfully initialized. [ 1.073567] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 1.073671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.073826] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.074121] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 1.074397] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.074593] pata_sis 0000:00:02.5: version 0.5.2 [ 1.074754] scsi0 : pata_sis [ 1.074938] scsi1 : pata_sis [ 1.075873] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.075877] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.076101] sis900.c: v1.08.10 Apr. 2 2006 [ 1.076125] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.077010] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 1.085784] 0000:00:04.0: Using transceiver found at address 1 as default [ 1.086696] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:0b:6a:56:4f:c2 [ 1.086799] console [netcon0] enabled [ 1.086802] netconsole: network logging started [ 1.086996] PNP: No PS/2 controller found. Probing ports directly. [ 1.087028] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.119329] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.119562] mice: PS/2 mouse device common for all mice [ 1.119642] rtc_cmos 00:03: RTC can wake from S4 [ 1.119747] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.119769] rtc0: alarms up to one year, 114 bytes nvram [ 1.119819] cpuidle: using governor ladder [ 1.119822] cpuidle: using governor menu [ 1.119895] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 1.120048] ICE1712 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.203216] Consumer PCM code does not work well at the moment --jk [ 1.212791] ALSA device list: [ 1.212795] #0: TerraTec EWS88MT at 0xd800, irq 16 [ 1.213348] TCP cubic registered [ 1.213352] NET: Registered protocol family 17 [ 1.213392] Using IPI Shortcut mode [ 1.213726] rtc_cmos 00:03: setting system clock to 2009-07-20 11:42:21 UTC (1248090141) [ 1.248264] ata1.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33 [ 1.248393] ata1.01: ATA-7: SAMSUNG SP1654N, BV100-37, max UDMA/100 [ 1.248397] ata1.01: 312581808 sectors, multi 16: LBA48 [ 1.264274] ata1.00: configured for UDMA/33 [ 1.296290] ata1.01: configured for UDMA/100 [ 1.297951] scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5 [ 1.298253] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP1654N BV10 PQ: 0 ANSI: 5 [ 1.468216] ata2.00: ATAPI: LITE-ON LTR-40125S, ZS0N, max UDMA/33 [ 1.468364] ata2.01: ATA-7: ST3200826A, 3.03, max UDMA/100 [ 1.468368] ata2.01: 390721968 sectors, multi 16: LBA48 [ 1.484229] ata2.00: configured for UDMA/33 [ 1.492297] ata2.01: configured for UDMA/100 [ 1.504155] scsi 1:0:0:0: CD-ROM LITE-ON LTR-40125S ZS0N PQ: 0 ANSI: 5 [ 1.504409] scsi 1:0:1:0: Direct-Access ATA ST3200826A 3.03 PQ: 0 ANSI: 5 [ 1.504608] Freeing unused kernel memory: 316k freed [ 1.505106] Write protecting the kernel text: 3396k [ 1.505145] Write protecting the kernel read-only data: 1188k [ 1.681079] Platform driver 'floppy' needs updating - please use dev_pm_ops [ 1.681138] Floppy drive(s): fd0 is 1.44M [ 1.719353] FDC 0 is a post-1991 82077 [ 1.813405] usbcore: registered new interface driver usbfs [ 1.813441] usbcore: registered new interface driver hub [ 1.813478] usbcore: registered new device driver usb [ 1.816114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.816173] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.816197] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 1.816209] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 1.816273] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported [ 1.816298] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000 [ 1.828072] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 1.828137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.828141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.828145] usb usb1: Product: EHCI Host Controller [ 1.828147] usb usb1: Manufacturer: Linux 2.6.31-rc3 ehci_hcd [ 1.828150] usb usb1: SerialNumber: 0000:00:03.2 [ 1.828255] usb usb1: configuration #1 chosen from 1 choice [ 1.828300] hub 1-0:1.0: USB hub found [ 1.828319] hub 1-0:1.0: 6 ports detected [ 1.862216] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.862273] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.862303] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 1.862315] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 1.862356] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000 [ 1.886510] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.886520] Uniform CD-ROM driver Revision: 3.20 [ 1.886670] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.886943] sd 0:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.887000] sd 0:0:1:0: [sda] Write Protect is off [ 1.887004] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.887032] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.887177] sda: sda1 sda2 sda3 [ 1.895026] sd 0:0:1:0: [sda] Attached SCSI disk [ 1.918217] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.918223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.918227] usb usb2: Product: OHCI Host Controller [ 1.918229] usb usb2: Manufacturer: Linux 2.6.31-rc3 ohci_hcd [ 1.918232] usb usb2: SerialNumber: 0000:00:03.0 [ 1.918364] usb usb2: configuration #1 chosen from 1 choice [ 1.918405] hub 2-0:1.0: USB hub found [ 1.918425] hub 2-0:1.0: 3 ports detected [ 1.918530] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.918680] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.918691] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.918726] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000 [ 1.933918] sr1: scsi3-mmc drive: 11x/48x writer cd/rw xa/form2 cdda tray [ 1.934083] sr 1:0:0:0: Attached scsi CD-ROM sr1 [ 1.935479] sd 1:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.935539] sd 1:0:1:0: [sdb] Write Protect is off [ 1.935544] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.935572] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.935733] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.957520] sd 1:0:1:0: [sdb] Attached SCSI disk [ 1.964857] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.964897] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.964931] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.964963] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 1.974197] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.974205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.974208] usb usb3: Product: OHCI Host Controller [ 1.974211] usb usb3: Manufacturer: Linux 2.6.31-rc3 ohci_hcd [ 1.974213] usb usb3: SerialNumber: 0000:00:03.1 [ 1.974341] usb usb3: configuration #1 chosen from 1 choice [ 1.974389] hub 3-0:1.0: USB hub found [ 1.974408] hub 3-0:1.0: 3 ports detected [ 2.140030] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 2.273237] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 2.273244] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.273247] usb 1-2: Product: USB2.0 Hub [ 2.273393] usb 1-2: configuration #1 chosen from 1 choice [ 2.273652] hub 1-2:1.0: USB hub found [ 2.273985] hub 1-2:1.0: 4 ports detected [ 2.384037] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.516941] usb 1-4: New USB device found, idVendor=059f, idProduct=100d [ 2.516948] usb 1-4: New USB device strings: Mfr=10, Product=11, SerialNumber=5 [ 2.516952] usb 1-4: Product: Rugged USB [ 2.516954] usb 1-4: Manufacturer: LaCie [ 2.516957] usb 1-4: SerialNumber: 97FBFFFFFFFF [ 2.517108] usb 1-4: configuration #1 chosen from 1 choice [ 2.528202] Initializing USB Mass Storage driver... [ 2.530912] scsi2 : SCSI emulation for USB Mass Storage devices [ 2.532251] usbcore: registered new interface driver usb-storage [ 2.532258] USB Mass Storage support registered. [ 2.534460] usb-storage: device found at 3 [ 2.534466] usb-storage: waiting for device to settle before scanning [ 2.592304] usb 1-2.1: new low speed USB device using ehci_hcd and address 4 [ 2.690658] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c00b [ 2.690665] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.690669] usb 1-2.1: Product: USB Mouse [ 2.690671] usb 1-2.1: Manufacturer: Logitech [ 2.690810] usb 1-2.1: configuration #1 chosen from 1 choice [ 2.713424] usbcore: registered new interface driver hiddev [ 2.717914] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:03.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input0 [ 2.718011] generic-usb 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:03.2-2.1/input0 [ 2.718042] usbcore: registered new interface driver usbhid [ 2.718046] usbhid: v2.6:USB HID core driver [ 2.764290] usb 1-2.4: new low speed USB device using ehci_hcd and address 5 [ 2.871123] usb 1-2.4: New USB device found, idVendor=04d9, idProduct=2013 [ 2.871131] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.871135] usb 1-2.4: Product: USB Keyboard [ 2.871137] usb 1-2.4: Manufacturer: [ 2.871277] usb 1-2.4: configuration #1 chosen from 1 choice [ 2.881154] input: USB Keyboard as /devices/pci0000:00/0000:00:03.2/usb1/1-2/1-2.4/1-2.4:1.0/input/input1 [ 2.881265] generic-usb 0003:04D9:2013.0002: input,hidraw1: USB HID v1.00 Keyboard [ USB Keyboard] on usb-0000:00:03.2-2.4/input0 [ 2.894732] input: USB Keyboard as /devices/pci0000:00/0000:00:03.2/usb1/1-2/1-2.4/1-2.4:1.1/input/input2 [ 2.894847] generic-usb 0003:04D9:2013.0003: input,hidraw2: USB HID v1.00 Device [ USB Keyboard] on usb-0000:00:03.2-2.4/input1 [ 3.327663] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 3.333887] SGI XFS Quota Management subsystem [ 3.362574] XFS mounting filesystem sdb1 [ 3.449891] Starting XFS recovery on filesystem: sdb1 (logdev: internal) [ 5.004782] Ending XFS recovery on filesystem: sdb1 (logdev: internal) [ 7.532324] usb-storage: device scan complete [ 7.532781] scsi 2:0:0:0: Direct-Access TOSHIBA MK1637GSX PQ: 0 ANSI: 2 CCS [ 7.533212] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 7.533872] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 7.535366] sd 2:0:0:0: [sdc] Write Protect is off [ 7.535370] sd 2:0:0:0: [sdc] Mode Sense: 00 38 00 00 [ 7.535374] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 7.537739] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 7.537910] sdc: sdc1 [ 7.541368] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 7.541554] sd 2:0:0:0: [sdc] Attached SCSI disk [ 8.035869] udev: starting version 141 [ 10.218132] Platform driver 'pcspkr' needs updating - please use dev_pm_ops [ 10.218221] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 10.271070] parport_pc 00:08: reported by Plug and Play ACPI [ 10.271177] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 10.309087] processor LNXCPU:00: registered as cooling_device0 [ 10.312991] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 10.313056] ACPI: Power Button [PWRF] [ 10.313126] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 10.313153] ACPI: Power Button [PWRB] [ 10.330158] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 11.279606] w83627hf: Found W83697HF chip at 0x290 [ 11.290673] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising. [ 11.290702] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec [ 11.290798] w83627hf/thf/hg WDT: initialized. timeout=60 sec (nowayout=0) [ 11.531568] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k [ 11.906411] device-mapper: uevent: version 1.0.3 [ 11.906561] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 13.214823] fuse init (API version 7.12) [ 13.473572] XFS mounting filesystem sdb3 [ 13.566652] Ending clean XFS mount for filesystem: sdb3 [ 13.609656] XFS mounting filesystem sdb4 [ 13.758996] Ending clean XFS mount for filesystem: sdb4 [ 13.850017] kjournald starting. Commit interval 5 seconds [ 13.850239] EXT3 FS on sdb2, internal journal [ 13.850247] EXT3-fs: mounted filesystem with writeback data mode. [ 13.892604] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 13.892668] kjournald starting. Commit interval 5 seconds [ 13.893040] EXT3 FS on sdc1, internal journal [ 13.893047] EXT3-fs: mounted filesystem with writeback data mode. [ 13.906212] XFS mounting filesystem sda3 [ 13.965915] Ending clean XFS mount for filesystem: sda3 [ 16.784857] eth0: Media Link On 100mbps full-duplex [ 19.591414] NET: Registered protocol family 10 [ 19.592076] lo: Disabled Privacy Extensions [ 26.402062] lp0: using parport0 (interrupt-driven). [ 26.408827] ppdev: user-space parallel port driver [10035.281879] [drm] TMDS-8: set mode 1280x1024 30 [10534.305703] Unpin not necessary for ef3b9f00 ! [10534.780027] [drm] TMDS-8: set mode 2c [10629.272761] [drm] TMDS-8: set mode 32 [10710.181748] [drm] TMDS-8: set mode 37 [10724.238284] [drm] TMDS-8: set mode 38 [11095.788350] [drm] TMDS-8: set mode 39 [11666.423474] [drm] TMDS-8: set mode 1920x1080 2b [11669.019480] [drm] TMDS-8: set mode 1280x1024 3c