Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: comm: file 1 is not in sorted order 343] alloc irq_desc for 19 on node 0 comm: file 2 is not in sorted order [ 1.113347] alloc kstat_irqs on node 0 [ 1.113358] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.113434] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.113441] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.113625] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.117642] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.117705] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.117730] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000 [ 1.136019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.136280] usb usb2: configuration #1 chosen from 1 choice [ 1.136463] hub 2-0:1.0: USB hub found [ 1.136536] hub 2-0:1.0: 6 ports detected [ 1.136784] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.136936] uhci_hcd: USB Universal Host Controller Interface driver [ 1.137888] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.137955] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.138022] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.138029] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.138213] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.138331] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 1.138629] usb usb3: configuration #1 chosen from 1 choice [ 1.138807] hub 3-0:1.0: USB hub found [ 1.138875] hub 3-0:1.0: 2 ports detected [ 1.139078] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.139147] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.139155] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.139347] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.139463] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 1.139747] usb usb4: configuration #1 chosen from 1 choice [ 1.140556] hub 4-0:1.0: USB hub found [ 1.140623] hub 4-0:1.0: 2 ports detected [ 1.141584] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 1.141650] alloc irq_desc for 22 on node 0 [ 1.141654] alloc kstat_irqs on node 0 [ 1.141665] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.141732] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.141739] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.141925] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.142042] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 1.142337] usb usb5: configuration #1 chosen from 1 choice [ 1.142517] hub 5-0:1.0: USB hub found [ 1.142585] hub 5-0:1.0: 2 ports detected [ 1.143344] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.143411] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.143478] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.143485] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.143674] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.143792] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 1.144096] usb usb6: configuration #1 chosen from 1 choice [ 1.144276] hub 6-0:1.0: USB hub found [ 1.144343] hub 6-0:1.0: 2 ports detected [ 1.144536] alloc irq_desc for 17 on node 0 [ 1.144542] alloc kstat_irqs on node 0 [ 1.144553] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.144621] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.144628] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.144820] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.144936] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 1.145214] usb usb7: configuration #1 chosen from 1 choice [ 1.145397] hub 7-0:1.0: USB hub found [ 1.145465] hub 7-0:1.0: 2 ports detected [ 1.145666] alloc irq_desc for 18 on node 0 [ 1.145671] alloc kstat_irqs on node 0 [ 1.145681] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.145750] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.145757] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.145935] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.146052] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 1.146338] usb usb8: configuration #1 chosen from 1 choice [ 1.146519] hub 8-0:1.0: USB hub found [ 1.146593] hub 8-0:1.0: 2 ports detected [ 1.147008] usbcore: registered new interface driver usbserial [ 1.147161] USB Serial support registered for generic [ 1.147312] usbcore: registered new interface driver usbserial_generic [ 1.147373] usbserial: USB Serial Driver core [ 1.147648] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.147734] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.157001] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.157066] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.157536] mice: PS/2 mouse device common for all mice [ 1.158112] rtc_cmos 00:07: RTC can wake from S4 [ 1.158294] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.158388] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.158832] device-mapper: uevent: version 1.0.3 [ 1.159187] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.159410] device-mapper: multipath: version 1.1.0 loaded [ 1.159477] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.160603] cpuidle: using governor ladder [ 1.161894] cpuidle: using governor menu [ 1.162906] TCP cubic registered [ 1.163107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.163670] NET: Registered protocol family 10 [ 1.164792] lo: Disabled Privacy Extensions [ 1.165531] NET: Registered protocol family 17 [ 1.165719] Bluetooth: L2CAP ver 2.13 [ 1.165775] Bluetooth: L2CAP socket layer initialized [ 1.165835] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.165890] Bluetooth: SCO socket layer initialized [ 1.166018] Bluetooth: RFCOMM socket layer initialized [ 1.166086] Bluetooth: RFCOMM TTY layer initialized [ 1.166142] Bluetooth: RFCOMM ver 1.11 [ 1.167990] PM: Resume from disk failed. [ 1.168000] registered taskstats version 1 [ 1.168150] Magic number: 1:93:1010 [ 1.168252] rtc_cmos 00:07: setting system clock to 2009-07-16 23:59:55 UTC (1247788795) [ 1.168309] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.168352] EDD information not available. [ 1.400049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.401383] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 1.401388] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.401661] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 1.401666] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.402652] ata1.00: ATA-8: HITACHI HTS722020K9SA00 FDE, DC4LC75A, max UDMA/133 [ 1.402715] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.404289] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 1.404293] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.404533] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 1.404537] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.405597] ata1.00: configured for UDMA/133 [ 1.422328] ata1.00: configured for UDMA/133 [ 1.422370] ata1: EH complete [ 1.422484] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72202 DC4L PQ: 0 ANSI: 5 [ 1.422808] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.422895] sd 0:0:0:0: [sda] Write Protect is off [ 1.422938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.422955] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.423101] sda: [ 1.423215] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.439899] sda1 sda2 < sda5 > [ 1.459895] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.500029] Clocksource tsc unstable (delta = -290873875 ns) [ 1.540041] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.677902] usb 1-6: configuration #1 chosen from 1 choice [ 1.788042] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 2.037549] usb 2-4: configuration #1 chosen from 2 choices [ 2.144054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.147847] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 2.148178] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 2.149968] ata2.00: ATAPI: MATSHITABD-MLT UJ232A, TC02, max UDMA/33 [ 2.153859] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 2.154176] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 2.155969] ata2.00: configured for UDMA/33 [ 2.173421] scsi 1:0:0:0: CD-ROM MATSHITA BD-MLT UJ232A TC02 PQ: 0 ANSI: 5 [ 2.178763] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.178822] Uniform CD-ROM driver Revision: 3.20 [ 2.179107] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.179200] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.179289] Freeing unused kernel memory: 652k freed [ 2.179550] Write protecting the kernel read-only data: 7516k [ 2.224906] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 2.226529] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 2.230201] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.242836] [drm] Initialized drm 1.1.0 20060810 [ 2.249240] i915 0000:00:02.0: power state changed by ACPI to D0 [ 2.249300] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.249346] i915 0000:00:02.0: setting latency timer to 64 [ 2.256334] alloc irq_desc for 29 on node 0 [ 2.256338] alloc kstat_irqs on node 0 [ 2.256345] i915 0000:00:02.0: irq 29 for MSI/MSI-X [ 2.357970] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D [ 2.440535] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 2.484491] [drm] fb0: inteldrmfb frame buffer device [ 2.487219] acpi device:03: registered as cooling_device2 [ 2.487508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input5 [ 2.487628] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.487739] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.491745] Console: switching to colour frame buffer device 240x75 [ 2.807652] usb 4-2: configuration #1 chosen from 1 choice [ 2.827828] [drm] LVDS-8: set mode 1920x1200 c [ 3.054373] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.054398] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.055206] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.055242] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.055329] alloc irq_desc for 30 on node 0 [ 3.055331] alloc kstat_irqs on node 0 [ 3.055342] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 3.081595] ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.142094] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.168395] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:98:a3:08 [ 3.168426] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.168478] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff [ 3.307430] PM: Starting manual resume from disk [ 3.307452] PM: Resume from partition 8:5 [ 3.307453] PM: Checking hibernation image. [ 3.307635] PM: Resume from disk failed. [ 3.310096] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 3.310099] PM: Marking nosave pages: 000000000009e000 - 0000000000100000 [ 3.310102] PM: Marking nosave pages: 00000000bd4a1000 - 00000000bd4a7000 [ 3.310104] PM: Marking nosave pages: 00000000bd5b7000 - 00000000bd60f000 [ 3.310108] PM: Marking nosave pages: 00000000bd6c6000 - 00000000bd9ff000 [ 3.310124] PM: Marking nosave pages: 00000000bda00000 - 0000000100000000 [ 3.310906] PM: Basic memory bitmaps created [ 3.323844] PM: Basic memory bitmaps freed [ 3.355402] kjournald starting. Commit interval 5 seconds [ 3.355428] EXT3-fs: mounted filesystem with writeback data mode. [ 23.840640] CPU0 attaching NULL sched-domain. [ 23.840651] CPU1 attaching NULL sched-domain. [ 23.856164] CPU0 attaching sched-domain: [ 23.856171] domain 0: span 0-1 level MC [ 23.856177] groups: 0 1 [ 23.856189] CPU1 attaching sched-domain: [ 23.856193] domain 0: span 0-1 level MC [ 23.856199] groups: 1 0 [ 24.684936] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 24.740656] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 24.741838] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.743311] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 24.976446] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 25.162005] Registered led device: iwl-phy0::radio [ 25.162046] Registered led device: iwl-phy0::assoc [ 25.162084] Registered led device: iwl-phy0::RX [ 25.162133] Registered led device: iwl-phy0::TX [ 25.221374] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.172565] virbr0: no IPv6 routers present [ 55.561800] CPU0 attaching NULL sched-domain. [ 55.561810] CPU1 attaching NULL sched-domain. [ 55.576721] CPU0 attaching sched-domain: [ 55.576729] domain 0: span 0-1 level MC [ 55.576735] groups: 0 1 [ 55.576746] CPU1 attaching sched-domain: [ 55.576751] domain 0: span 0-1 level MC [ 55.576756] groups: 1 0 [ 73.200703] wlan0: authenticate with AP 00:18:3a:ab:88:2f [ 73.202836] wlan0: authenticated [ 73.202841] wlan0: associate with AP 00:18:3a:ab:88:2f [ 73.205403] wlan0: RX AssocResp from 00:18:3a:ab:88:2f (capab=0x411 status=0 aid=1) [ 73.205412] wlan0: associated [ 73.209214] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 73.430324] Intel AES-NI instructions are not detected. [ 73.584291] padlock: VIA PadLock not detected. [ 83.884131] wlan0: no IPv6 routers present [ 5859.359037] render error detected, EIR: 0x00000010 [ 5859.359042] page table error [ 5859.359045] PGTBL_ER: 0x04000000 [ 5859.359048] [drm:i915_driver_irq_handler] *ERROR* EIR stuck: 0x00000010, masking [51446.132904] thinkpad_acpi: EC reports that Thermal Table has changed [51446.281702] CPU0 attaching NULL sched-domain. [51446.281714] CPU1 attaching NULL sched-domain. [51446.296400] CPU0 attaching sched-domain: [51446.296409] domain 0: span 0-1 level MC [51446.296415] groups: 0 1 [51446.296425] domain 1: span 0-1 level CPU [51446.296431] groups: 0-1 (__cpu_power = 2048) [51446.296444] CPU1 attaching sched-domain: [51446.296448] domain 0: span 0-1 level MC [51446.296454] groups: 1 0 [51446.296462] domain 1: span 0-1 level CPU [51446.296468] groups: 0-1 (__cpu_power = 2048) [51510.024184] kvm: disabling virtualization on CPU1 [51510.024468] CPU 1 is now offline [51510.024476] SMP alternatives: switching to UP code [51510.040506] CPU0 attaching NULL sched-domain. [51510.040509] CPU1 attaching NULL sched-domain. [51510.040516] CPU0 attaching NULL sched-domain. [51510.172585] CPU0 attaching NULL sched-domain. [51510.172625] CPU0 attaching NULL sched-domain. [51510.484243] wlan0: disassociating by local choice (reason=3) [51510.496038] usb 4-2: USB disconnect, address 2 [51510.496664] btusb_intr_complete: hci0 urb ffff88013651aa80 failed to resubmit (19) [51510.496669] btusb_bulk_complete: hci0 urb ffff88013651a780 failed to resubmit (19) [51510.497662] btusb_bulk_complete: hci0 urb ffff880134c3ab40 failed to resubmit (19) [51510.497735] btusb_send_frame: hci0 urb ffff88009a0d8780 submission failed [51510.519192] wlan0: deauthenticating by local choice (reason=3) [51512.662945] PM: Syncing filesystems ... done. [51512.715436] PM: Preparing system for mem sleep [51512.715440] Freezing user space processes ... (elapsed 0.04 seconds) done. [51512.764618] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [51512.764646] PM: Entering mem sleep [51512.764658] Suspending console(s) (use no_console_suspend to debug) [51513.032019] sd 0:0:0:0: [sda] Synchronizing SCSI cache [51513.032154] sd 0:0:0:0: [sda] Stopping disk [51514.485321] ACPI handle has no context! [51514.485326] sdhci-pci 0000:15:00.2: PME# disabled [51514.485334] sdhci-pci 0000:15:00.2: PCI INT C disabled [51514.485339] ACPI handle has no context! [51514.505045] ACPI handle has no context! [51514.584035] ehci_hcd 0000:00:1d.7: PCI INT D disabled [51514.584041] uhci_hcd 0000:00:1d.2: PCI INT C disabled [51514.584046] uhci_hcd 0000:00:1d.1: PCI INT B disabled [51514.584051] uhci_hcd 0000:00:1d.0: PCI INT A disabled [51514.584054] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [51514.584056] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [51514.584058] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [51514.584061] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [51514.584068] HDA Intel 0000:00:1b.0: PCI INT B disabled [51514.600034] ehci_hcd 0000:00:1a.7: PCI INT D disabled [51514.600040] uhci_hcd 0000:00:1a.2: PCI INT C disabled [51514.600045] uhci_hcd 0000:00:1a.1: PCI INT B disabled [51514.600050] uhci_hcd 0000:00:1a.0: PCI INT A disabled [51514.600235] e1000e 0000:00:19.0: PCI INT A disabled [51514.600240] e1000e 0000:00:19.0: PME# enabled [51514.600244] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [51514.616236] heci 0000:00:03.0: PCI INT A disabled [51514.715179] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [51514.728091] i915 0000:00:02.0: power state changed by ACPI to D3 [51514.728136] PM: suspend devices took 1.964 seconds [51514.728254] ricoh-mmc: Suspending. [51514.728267] ricoh-mmc: Controller is now re-enabled. [51514.728434] ehci_hcd 0000:00:1d.7: PME# disabled [51514.848041] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [51514.944046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [51514.944240] ehci_hcd 0000:00:1a.7: PME# disabled [51515.064046] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [51515.160046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [51515.256043] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [51515.408044] ACPI: Preparing to enter system sleep state S3 [51516.008126] Disabling non-boot CPUs ... [51516.008165] Extended CMOS year: 2000 [51516.008165] Back to C! [51516.008165] Extended CMOS year: 2000 [51516.008165] ACPI: Waking up from system sleep state S3 [51517.160106] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [51517.160125] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [51517.160134] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [51517.328041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [51517.328065] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51517.328097] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51517.360045] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [51517.360069] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51517.360109] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [51517.360127] ehci_hcd 0000:00:1a.7: PME# disabled [51517.360156] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [51517.360188] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [51517.360197] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51517.360240] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x200000f0, writing 0xf0) [51517.360249] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51517.360299] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51517.360348] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51517.392045] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [51517.392069] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51517.392101] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51517.392132] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51517.392171] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [51517.392188] ehci_hcd 0000:00:1d.7: PME# disabled [51517.392278] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [51517.408038] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [51517.408044] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [51517.424036] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [51517.424042] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [51517.424089] ricoh-mmc: Resuming. [51517.424101] ricoh-mmc: Controller is now disabled. [51517.560337] i915 0000:00:02.0: setting latency timer to 64 [51517.621022] [drm] LVDS-8: set mode 1920x1200 c [51517.641146] pci 0000:00:02.1: PME# disabled [51517.641158] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006) [51517.641237] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [51517.641239] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [51517.641243] e1000e 0000:00:19.0: setting latency timer to 64 [51517.641247] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [51517.641251] e1000e 0000:00:19.0: PME# disabled [51517.641252] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [51517.641256] e1000e 0000:00:19.0: PME# disabled [51517.641288] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [51517.691918] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [51517.691923] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [51517.691943] usb usb3: root hub lost power or was reset [51517.691959] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [51517.691964] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [51517.691983] usb usb4: root hub lost power or was reset [51517.692010] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [51517.692014] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [51517.692034] usb usb5: root hub lost power or was reset [51517.692049] ehci_hcd 0000:00:1a.7: PME# disabled [51517.692053] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [51517.692058] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [51517.692111] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [51517.692116] HDA Intel 0000:00:1b.0: setting latency timer to 64 [51517.692128] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [51517.692131] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [51517.692133] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [51517.692136] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [51517.692141] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [51517.692146] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [51517.692164] usb usb6: root hub lost power or was reset [51517.692179] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [51517.692184] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [51517.692203] usb usb7: root hub lost power or was reset [51517.692218] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [51517.692223] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [51517.692242] usb usb8: root hub lost power or was reset [51517.692257] ehci_hcd 0000:00:1d.7: PME# disabled [51517.692260] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [51517.692265] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [51517.692282] pci 0000:00:1e.0: setting latency timer to 64 [51517.692338] ahci 0000:00:1f.2: setting latency timer to 64 [51517.692459] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100506, writing 0x100106) [51517.890006] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [51517.896072] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [51517.896074] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [51517.897080] pci 0000:15:00.4: PME# disabled [51517.897084] pci 0000:15:00.5: PME# disabled [51518.016020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [51518.019438] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [51518.020578] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [51518.028299] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [51518.029441] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [51518.032145] ata2.00: configured for UDMA/33 [51518.306386] sd 0:0:0:0: [sda] Starting disk [51518.800014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [51518.806328] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [51518.806330] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [51518.806604] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [51518.806606] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [51518.809457] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [51518.809459] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [51518.809706] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [51518.809708] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [51518.810935] ata1.00: configured for UDMA/133 [51518.826670] ata1.00: configured for UDMA/133 [51518.826672] ata1: EH complete [51518.952012] usb 1-6: reset high speed USB device using ehci_hcd and address 3 [51519.090603] PM: resume devices took 1.664 seconds [51519.090627] PM: Finishing wakeup. [51519.090628] Restarting tasks ... [51519.092626] usb 2-4: USB disconnect, address 2 [51519.092951] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, ffff88003783f000/3783f000 (bad dma) [51519.093007] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, ffff88003783f080/3783f080 (bad dma) [51519.093040] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-4, CDC Ethernet Device [51519.214769] done. [51521.188160] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [51521.244062] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [51521.244501] ADDRCONF(NETDEV_UP): eth0: link is not ready [51521.277081] Registered led device: iwl-phy0::radio [51521.277094] Registered led device: iwl-phy0::assoc [51521.277105] Registered led device: iwl-phy0::RX [51521.277115] Registered led device: iwl-phy0::TX [51521.284070] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51521.287716] wlan0: direct probe to AP 00:04:e2:c7:a7:a9 try 1 [51521.484013] wlan0: direct probe to AP 00:04:e2:c7:a7:a9 try 2 [51521.510503] CPU0 attaching NULL sched-domain. [51521.510540] CPU0 attaching NULL sched-domain. [51521.684029] wlan0: direct probe to AP 00:04:e2:c7:a7:a9 try 3 [51521.884011] wlan0: direct probe to AP 00:04:e2:c7:a7:a9 timed out [51521.912012] usb 4-2: new full speed USB device using uhci_hcd and address 3 [51522.083872] usb 4-2: configuration #1 chosen from 1 choice [51531.513712] SMP alternatives: switching to SMP code [51531.518601] Booting processor 1 APIC 0x1 ip 0x6000 [51516.624107] Initializing CPU#1 [51516.624107] Calibrating delay using timer specific routine.. 5587.28 BogoMIPS (lpj=11174560) [51516.624107] CPU: L1 I cache: 32K, L1 D cache: 32K [51516.624107] CPU: L2 cache: 6144K [51516.624107] CPU 1/0x1 -> Node 0 [51516.624107] CPU: Physical Processor ID: 0 [51516.624107] CPU: Processor Core ID: 1 [51531.609321] CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 [51531.609330] kvm: enabling virtualization on CPU1 [51531.610751] CPU0 attaching NULL sched-domain. [51531.612010] Switched to high resolution mode on CPU 1 [51531.624048] CPU0 attaching sched-domain: [51531.624053] domain 0: span 0-1 level MC [51531.624056] groups: 0 1 [51531.624061] domain 1: span 0-1 level CPU [51531.624064] groups: 0-1 (__cpu_power = 2048) [51531.624070] CPU1 attaching sched-domain: [51531.624073] domain 0: span 0-1 level MC [51531.624075] groups: 1 0 [51531.624080] domain 1: span 0-1 level CPU [51531.624082] groups: 0-1 (__cpu_power = 2048) [51796.798462] kvm: disabling virtualization on CPU1 [51796.798490] CPU 1 is now offline [51796.798497] SMP alternatives: switching to UP code [51796.814176] CPU0 attaching NULL sched-domain. [51796.814179] CPU1 attaching NULL sched-domain. [51796.814186] CPU0 attaching NULL sched-domain. [51797.165821] CPU0 attaching NULL sched-domain. [51797.165856] CPU0 attaching NULL sched-domain. [51797.432043] usb 4-2: USB disconnect, address 3 [51797.432913] btusb_intr_complete: hci0 urb ffff88010a433f00 failed to resubmit (19) [51797.432917] btusb_bulk_complete: hci0 urb ffff88010a433300 failed to resubmit (19) [51797.433913] btusb_bulk_complete: hci0 urb ffff8800b0ca03c0 failed to resubmit (19) [51797.433981] btusb_send_frame: hci0 urb ffff880134590b40 submission failed [51797.832678] PM: Syncing filesystems ... done. [51797.885548] PM: Preparing system for mem sleep [51797.885552] Freezing user space processes ... (elapsed 0.03 seconds) done. [51797.922729] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [51797.922757] PM: Entering mem sleep [51797.922762] Suspending console(s) (use no_console_suspend to debug) [51798.172039] sd 0:0:0:0: [sda] Synchronizing SCSI cache [51798.172151] sd 0:0:0:0: [sda] Stopping disk [51799.637257] ACPI handle has no context! [51799.637262] sdhci-pci 0000:15:00.2: PME# disabled [51799.637270] sdhci-pci 0000:15:00.2: PCI INT C disabled [51799.637275] ACPI handle has no context! [51799.657046] ACPI handle has no context! [51799.736034] ehci_hcd 0000:00:1d.7: PCI INT D disabled [51799.736040] uhci_hcd 0000:00:1d.2: PCI INT C disabled [51799.736045] uhci_hcd 0000:00:1d.1: PCI INT B disabled [51799.736051] uhci_hcd 0000:00:1d.0: PCI INT A disabled [51799.736054] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [51799.736056] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [51799.736059] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [51799.736061] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [51799.736068] HDA Intel 0000:00:1b.0: PCI INT B disabled [51799.752032] ehci_hcd 0000:00:1a.7: PCI INT D disabled [51799.752038] uhci_hcd 0000:00:1a.2: PCI INT C disabled [51799.752043] uhci_hcd 0000:00:1a.1: PCI INT B disabled [51799.752048] uhci_hcd 0000:00:1a.0: PCI INT A disabled [51799.752232] e1000e 0000:00:19.0: PCI INT A disabled [51799.752237] e1000e 0000:00:19.0: PME# enabled [51799.752242] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [51799.869976] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [51799.884089] i915 0000:00:02.0: power state changed by ACPI to D3 [51799.884139] PM: suspend devices took 1.964 seconds [51799.884254] ricoh-mmc: Suspending. [51799.884267] ricoh-mmc: Controller is now re-enabled. [51799.884434] ehci_hcd 0000:00:1d.7: PME# disabled [51799.932052] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [51799.972046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [51799.972240] ehci_hcd 0000:00:1a.7: PME# disabled [51800.020047] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [51800.052046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [51800.156041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [51800.300044] ACPI: Preparing to enter system sleep state S3 [51800.884125] Disabling non-boot CPUs ... [51800.884165] Extended CMOS year: 2000 [51800.884165] Back to C! [51800.884165] Extended CMOS year: 2000 [51800.884165] ACPI: Waking up from system sleep state S3 [51802.020107] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [51802.020126] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [51802.020134] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [51802.188041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [51802.188065] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51802.188097] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51802.220046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [51802.220070] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51802.220110] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [51802.220127] ehci_hcd 0000:00:1a.7: PME# disabled [51802.220157] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [51802.220195] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51802.220245] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51802.220295] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51802.220344] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [51802.252045] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [51802.252069] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51802.252101] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51802.252132] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [51802.252171] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [51802.252188] ehci_hcd 0000:00:1d.7: PME# disabled [51802.252278] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [51802.252383] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [51802.268038] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [51802.268044] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [51802.284037] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [51802.284043] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [51802.284090] ricoh-mmc: Resuming. [51802.284102] ricoh-mmc: Controller is now disabled. [51802.421051] i915 0000:00:02.0: setting latency timer to 64 [51802.481819] [drm] LVDS-8: set mode 1920x1200 c [51802.501906] pci 0000:00:02.1: PME# disabled [51802.501919] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006) [51802.501998] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [51802.502000] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [51802.502004] e1000e 0000:00:19.0: setting latency timer to 64 [51802.502009] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [51802.502012] e1000e 0000:00:19.0: PME# disabled [51802.502013] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [51802.502017] e1000e 0000:00:19.0: PME# disabled [51802.502048] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [51802.555918] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [51802.555923] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [51802.555944] usb usb3: root hub lost power or was reset [51802.555960] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [51802.555965] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [51802.555984] usb usb4: root hub lost power or was reset [51802.556012] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [51802.556016] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [51802.556035] usb usb5: root hub lost power or was reset [51802.556051] ehci_hcd 0000:00:1a.7: PME# disabled [51802.556054] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [51802.556059] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [51802.556113] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [51802.556117] HDA Intel 0000:00:1b.0: setting latency timer to 64 [51802.556129] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [51802.556133] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [51802.556135] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [51802.556138] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [51802.556143] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [51802.556148] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [51802.556167] usb usb6: root hub lost power or was reset [51802.556182] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [51802.556187] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [51802.556206] usb usb7: root hub lost power or was reset [51802.556221] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [51802.556226] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [51802.556245] usb usb8: root hub lost power or was reset [51802.556260] ehci_hcd 0000:00:1d.7: PME# disabled [51802.556264] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [51802.556269] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [51802.556277] pci 0000:00:1e.0: setting latency timer to 64 [51802.556332] ahci 0000:00:1f.2: setting latency timer to 64 [51802.754009] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [51802.760075] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [51802.760077] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [51802.761083] pci 0000:15:00.4: PME# disabled [51802.761087] pci 0000:15:00.5: PME# disabled [51802.880019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [51802.883113] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [51802.884253] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [51802.892040] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [51802.893171] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [51802.895744] ata2.00: configured for UDMA/33 [51803.066333] sd 0:0:0:0: [sda] Starting disk [51803.664014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [51803.672647] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [51803.672650] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [51803.672924] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [51803.672926] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [51803.675781] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [51803.675783] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [51803.676028] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [51803.676030] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [51803.677260] ata1.00: configured for UDMA/133 [51803.694692] ata1.00: configured for UDMA/133 [51803.694693] ata1: EH complete [51803.816016] usb 1-6: reset high speed USB device using ehci_hcd and address 3 [51803.954630] PM: resume devices took 1.668 seconds [51803.954654] PM: Finishing wakeup. [51803.954655] Restarting tasks ... done. [51804.796153] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [51804.852046] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [51804.852461] ADDRCONF(NETDEV_UP): eth0: link is not ready [51804.885785] Registered led device: iwl-phy0::radio [51804.885797] Registered led device: iwl-phy0::assoc [51804.885808] Registered led device: iwl-phy0::RX [51804.885818] Registered led device: iwl-phy0::TX [51804.892177] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51805.083768] CPU0 attaching NULL sched-domain. [51805.083804] CPU0 attaching NULL sched-domain. [51805.520014] usb 4-2: new full speed USB device using uhci_hcd and address 4 [51805.691756] usb 4-2: configuration #1 chosen from 1 choice [51815.101068] SMP alternatives: switching to SMP code [51815.106090] Booting processor 1 APIC 0x1 ip 0x6000 [51801.492108] Initializing CPU#1 [51801.492108] Calibrating delay using timer specific routine.. 5587.21 BogoMIPS (lpj=11174433) [51801.492108] CPU: L1 I cache: 32K, L1 D cache: 32K [51801.492108] CPU: L2 cache: 6144K [51801.492108] CPU 1/0x1 -> Node 0 [51801.492108] CPU: Physical Processor ID: 0 [51801.492108] CPU: Processor Core ID: 1 [51815.197321] CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 [51815.197330] kvm: enabling virtualization on CPU1 [51815.199640] CPU0 attaching NULL sched-domain. [51815.200010] Switched to high resolution mode on CPU 1 [51815.212100] CPU0 attaching sched-domain: [51815.212105] domain 0: span 0-1 level MC [51815.212108] groups: 0 1 [51815.212114] domain 1: span 0-1 level CPU [51815.212117] groups: 0-1 (__cpu_power = 2048) [51815.212123] CPU1 attaching sched-domain: [51815.212126] domain 0: span 0-1 level MC [51815.212128] groups: 1 0 [51815.212133] domain 1: span 0-1 level CPU [51815.212135] groups: 0-1 (__cpu_power = 2048) [51927.562963] TCP vegas registered [52273.795102] kvm: disabling virtualization on CPU1 [52273.795109] CPU 1 is now offline [52273.795111] SMP alternatives: switching to UP code [52273.801267] CPU0 attaching NULL sched-domain. [52273.801270] CPU1 attaching NULL sched-domain. [52273.801277] CPU0 attaching NULL sched-domain. [52273.888140] CPU0 attaching NULL sched-domain. [52273.888177] CPU0 attaching NULL sched-domain. [52274.088313] usb 4-2: USB disconnect, address 4 [52274.089161] btusb_intr_complete: hci0 urb ffff8800bbdcd3c0 failed to resubmit (19) [52274.089166] btusb_bulk_complete: hci0 urb ffff8800bbdcda80 failed to resubmit (19) [52274.090160] btusb_bulk_complete: hci0 urb ffff8800bbdcd180 failed to resubmit (19) [52274.090235] btusb_send_frame: hci0 urb ffff88013706b180 submission failed [52274.543638] PM: Syncing filesystems ... done. [52274.679648] PM: Preparing system for mem sleep [52274.679652] Freezing user space processes ... (elapsed 0.03 seconds) done. [52274.716998] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [52274.717026] PM: Entering mem sleep [52274.717039] Suspending console(s) (use no_console_suspend to debug) [52274.956038] sd 0:0:0:0: [sda] Synchronizing SCSI cache [52274.956143] sd 0:0:0:0: [sda] Stopping disk [52276.421359] ACPI handle has no context! [52276.421364] sdhci-pci 0000:15:00.2: PME# disabled [52276.421372] sdhci-pci 0000:15:00.2: PCI INT C disabled [52276.421377] ACPI handle has no context! [52276.441046] ACPI handle has no context! [52276.520034] ehci_hcd 0000:00:1d.7: PCI INT D disabled [52276.520040] uhci_hcd 0000:00:1d.2: PCI INT C disabled [52276.520045] uhci_hcd 0000:00:1d.1: PCI INT B disabled [52276.520050] uhci_hcd 0000:00:1d.0: PCI INT A disabled [52276.520053] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [52276.520055] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [52276.520058] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [52276.520060] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [52276.520067] HDA Intel 0000:00:1b.0: PCI INT B disabled [52276.536032] ehci_hcd 0000:00:1a.7: PCI INT D disabled [52276.536037] uhci_hcd 0000:00:1a.2: PCI INT C disabled [52276.536042] uhci_hcd 0000:00:1a.1: PCI INT B disabled [52276.536047] uhci_hcd 0000:00:1a.0: PCI INT A disabled [52276.536233] e1000e 0000:00:19.0: PCI INT A disabled [52276.536238] e1000e 0000:00:19.0: PME# enabled [52276.536243] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [52276.632380] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [52276.648091] i915 0000:00:02.0: power state changed by ACPI to D3 [52276.648135] PM: suspend devices took 1.932 seconds [52276.648250] ricoh-mmc: Suspending. [52276.648262] ricoh-mmc: Controller is now re-enabled. [52276.648430] ehci_hcd 0000:00:1d.7: PME# disabled [52276.696052] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [52276.728046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [52276.728240] ehci_hcd 0000:00:1a.7: PME# disabled [52276.776046] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [52276.808046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [52276.912041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [52277.056043] ACPI: Preparing to enter system sleep state S3 [52277.640125] Disabling non-boot CPUs ... [52277.640165] Extended CMOS year: 2000 [52277.640165] Back to C! [52277.640165] Extended CMOS year: 2000 [52277.640165] ACPI: Waking up from system sleep state S3 [52278.808106] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [52278.808125] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [52278.808134] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [52278.976041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [52278.976065] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52278.976097] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52279.008046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [52279.008070] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52279.008110] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52279.008127] ehci_hcd 0000:00:1a.7: PME# disabled [52279.008156] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [52279.008195] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52279.008245] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52279.008295] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52279.008345] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52279.040046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [52279.040069] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52279.040101] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52279.040132] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52279.040172] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52279.040189] ehci_hcd 0000:00:1d.7: PME# disabled [52279.040278] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [52279.040384] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [52279.056039] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52279.056045] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52279.072037] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52279.072043] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52279.072090] ricoh-mmc: Resuming. [52279.072102] ricoh-mmc: Controller is now disabled. [52279.209512] i915 0000:00:02.0: setting latency timer to 64 [52279.270197] [drm] LVDS-8: set mode 1920x1200 c [52279.290317] pci 0000:00:02.1: PME# disabled [52279.290330] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006) [52279.290410] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52279.290412] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [52279.290415] e1000e 0000:00:19.0: setting latency timer to 64 [52279.290420] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52279.290424] e1000e 0000:00:19.0: PME# disabled [52279.290425] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52279.290428] e1000e 0000:00:19.0: PME# disabled [52279.290460] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52279.343924] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52279.343929] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [52279.343948] usb usb3: root hub lost power or was reset [52279.343964] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [52279.343969] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [52279.343988] usb usb4: root hub lost power or was reset [52279.344016] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [52279.344020] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [52279.344040] usb usb5: root hub lost power or was reset [52279.344056] ehci_hcd 0000:00:1a.7: PME# disabled [52279.344059] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [52279.344064] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [52279.344117] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52279.344121] HDA Intel 0000:00:1b.0: setting latency timer to 64 [52279.344133] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [52279.344136] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [52279.344139] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [52279.344142] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [52279.344147] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [52279.344152] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [52279.344170] usb usb6: root hub lost power or was reset [52279.344185] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52279.344190] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [52279.344208] usb usb7: root hub lost power or was reset [52279.344223] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52279.344228] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [52279.344247] usb usb8: root hub lost power or was reset [52279.344263] ehci_hcd 0000:00:1d.7: PME# disabled [52279.344266] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [52279.344271] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [52279.344280] pci 0000:00:1e.0: setting latency timer to 64 [52279.344335] ahci 0000:00:1f.2: setting latency timer to 64 [52279.542011] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [52279.548077] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52279.548079] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [52279.549085] pci 0000:15:00.4: PME# disabled [52279.549090] pci 0000:15:00.5: PME# disabled [52279.668019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52279.671509] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52279.672652] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52279.680518] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52279.681649] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52279.684329] ata2.00: configured for UDMA/33 [52279.853974] sd 0:0:0:0: [sda] Starting disk [52280.340015] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52280.345186] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52280.345189] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52280.345457] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52280.345459] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52280.348317] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52280.348319] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52280.348562] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52280.348564] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52280.349794] ata1.00: configured for UDMA/133 [52280.366700] ata1.00: configured for UDMA/133 [52280.366701] ata1: EH complete [52280.488014] usb 1-6: reset high speed USB device using ehci_hcd and address 3 [52280.626711] PM: resume devices took 1.552 seconds [52280.626735] PM: Finishing wakeup. [52280.626736] Restarting tasks ... done. [52281.360153] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52281.416048] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52281.416459] ADDRCONF(NETDEV_UP): eth0: link is not ready [52281.448779] Registered led device: iwl-phy0::radio [52281.448792] Registered led device: iwl-phy0::assoc [52281.448803] Registered led device: iwl-phy0::RX [52281.448813] Registered led device: iwl-phy0::TX [52281.457991] ADDRCONF(NETDEV_UP): wlan0: link is not ready [52281.640494] CPU0 attaching NULL sched-domain. [52281.640531] CPU0 attaching NULL sched-domain. [52282.088014] usb 4-2: new full speed USB device using uhci_hcd and address 5 [52282.258262] usb 4-2: configuration #1 chosen from 1 choice [52284.264243] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [52291.643930] SMP alternatives: switching to SMP code [52291.648828] Booting processor 1 APIC 0x1 ip 0x6000 [52278.264108] Initializing CPU#1 [52278.264108] Calibrating delay using timer specific routine.. 5587.12 BogoMIPS (lpj=11174250) [52278.264108] CPU: L1 I cache: 32K, L1 D cache: 32K [52278.264108] CPU: L2 cache: 6144K [52278.264108] CPU 1/0x1 -> Node 0 [52278.264108] CPU: Physical Processor ID: 0 [52278.264108] CPU: Processor Core ID: 1 [52291.737272] CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 [52291.737283] kvm: enabling virtualization on CPU1 [52291.738609] CPU0 attaching NULL sched-domain. [52291.740011] Switched to high resolution mode on CPU 1 [52291.755391] CPU0 attaching sched-domain: [52291.755394] domain 0: span 0-1 level MC [52291.755425] groups: 0 1 [52291.755428] domain 1: span 0-1 level CPU [52291.755429] groups: 0-1 (__cpu_power = 2048) [52291.755434] CPU1 attaching sched-domain: [52291.755435] domain 0: span 0-1 level MC [52291.755436] groups: 1 0 [52291.755439] domain 1: span 0-1 level CPU [52291.755440] groups: 0-1 (__cpu_power = 2048) [52344.665276] kvm: disabling virtualization on CPU1 [52344.665329] CPU 1 is now offline [52344.665336] SMP alternatives: switching to UP code [52344.683389] CPU0 attaching NULL sched-domain. [52344.683393] CPU1 attaching NULL sched-domain. [52344.683399] CPU0 attaching NULL sched-domain. [52344.786132] CPU0 attaching NULL sched-domain. [52344.786167] CPU0 attaching NULL sched-domain. [52345.016048] usb 4-2: USB disconnect, address 5 [52345.016998] btusb_intr_complete: hci0 urb ffff8800b9c68840 failed to resubmit (19) [52345.017003] btusb_bulk_complete: hci0 urb ffff8800b9c68900 failed to resubmit (19) [52345.018002] btusb_bulk_complete: hci0 urb ffff8800b9c68f00 failed to resubmit (19) [52345.018071] btusb_send_frame: hci0 urb ffff8801069f0e40 submission failed [52345.459212] PM: Syncing filesystems ... done. [52345.519382] PM: Preparing system for mem sleep [52345.519386] Freezing user space processes ... (elapsed 0.03 seconds) done. [52345.556262] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [52345.556290] PM: Entering mem sleep [52345.556295] Suspending console(s) (use no_console_suspend to debug) [52345.792034] sd 0:0:0:0: [sda] Synchronizing SCSI cache [52345.792149] sd 0:0:0:0: [sda] Stopping disk [52347.245360] ACPI handle has no context! [52347.245365] sdhci-pci 0000:15:00.2: PME# disabled [52347.245373] sdhci-pci 0000:15:00.2: PCI INT C disabled [52347.245378] ACPI handle has no context! [52347.265048] ACPI handle has no context! [52347.344034] ehci_hcd 0000:00:1d.7: PCI INT D disabled [52347.344039] uhci_hcd 0000:00:1d.2: PCI INT C disabled [52347.344044] uhci_hcd 0000:00:1d.1: PCI INT B disabled [52347.344050] uhci_hcd 0000:00:1d.0: PCI INT A disabled [52347.344052] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [52347.344055] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [52347.344057] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [52347.344060] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [52347.344067] HDA Intel 0000:00:1b.0: PCI INT B disabled [52347.360033] ehci_hcd 0000:00:1a.7: PCI INT D disabled [52347.360038] uhci_hcd 0000:00:1a.2: PCI INT C disabled [52347.360043] uhci_hcd 0000:00:1a.1: PCI INT B disabled [52347.360049] uhci_hcd 0000:00:1a.0: PCI INT A disabled [52347.360235] e1000e 0000:00:19.0: PCI INT A disabled [52347.360239] e1000e 0000:00:19.0: PME# enabled [52347.360244] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [52347.474767] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [52347.488088] i915 0000:00:02.0: power state changed by ACPI to D3 [52347.488133] PM: suspend devices took 1.932 seconds [52347.488246] ricoh-mmc: Suspending. [52347.488259] ricoh-mmc: Controller is now re-enabled. [52347.488427] ehci_hcd 0000:00:1d.7: PME# disabled [52347.536051] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [52347.568046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [52347.568240] ehci_hcd 0000:00:1a.7: PME# disabled [52347.616046] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [52347.648046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [52347.752041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [52347.904043] ACPI: Preparing to enter system sleep state S3 [52348.480125] Disabling non-boot CPUs ... [52348.480165] Extended CMOS year: 2000 [52348.480165] Back to C! [52348.480165] Extended CMOS year: 2000 [52348.480165] ACPI: Waking up from system sleep state S3 [52349.632106] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [52349.632125] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [52349.632134] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [52349.800041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [52349.800065] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52349.800097] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52349.832046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [52349.832070] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52349.832110] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52349.832127] ehci_hcd 0000:00:1a.7: PME# disabled [52349.832156] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [52349.832195] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52349.832245] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52349.832294] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52349.832344] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52349.864046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [52349.864069] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52349.864101] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52349.864132] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52349.864172] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52349.864189] ehci_hcd 0000:00:1d.7: PME# disabled [52349.864279] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [52349.864383] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [52349.880038] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52349.880044] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52349.896037] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52349.896043] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52349.896090] ricoh-mmc: Resuming. [52349.896102] ricoh-mmc: Controller is now disabled. [52350.033523] i915 0000:00:02.0: setting latency timer to 64 [52350.094145] [drm] LVDS-8: set mode 1920x1200 c [52350.114229] pci 0000:00:02.1: PME# disabled [52350.114241] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006) [52350.114313] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52350.114315] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [52350.114318] e1000e 0000:00:19.0: setting latency timer to 64 [52350.114323] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52350.114326] e1000e 0000:00:19.0: PME# disabled [52350.114328] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52350.114331] e1000e 0000:00:19.0: PME# disabled [52350.114363] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52350.167918] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52350.167923] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [52350.167943] usb usb3: root hub lost power or was reset [52350.167959] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [52350.167964] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [52350.167983] usb usb4: root hub lost power or was reset [52350.168010] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [52350.168015] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [52350.168034] usb usb5: root hub lost power or was reset [52350.168050] ehci_hcd 0000:00:1a.7: PME# disabled [52350.168053] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [52350.168058] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [52350.168111] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52350.168116] HDA Intel 0000:00:1b.0: setting latency timer to 64 [52350.168128] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [52350.168132] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [52350.168134] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [52350.168137] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [52350.168142] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [52350.168147] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [52350.168166] usb usb6: root hub lost power or was reset [52350.168181] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52350.168185] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [52350.168204] usb usb7: root hub lost power or was reset [52350.168219] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52350.168223] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [52350.168243] usb usb8: root hub lost power or was reset [52350.168258] ehci_hcd 0000:00:1d.7: PME# disabled [52350.168261] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [52350.168267] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [52350.168275] pci 0000:00:1e.0: setting latency timer to 64 [52350.168330] ahci 0000:00:1f.2: setting latency timer to 64 [52350.366010] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [52350.372076] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52350.372079] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [52350.373084] pci 0000:15:00.4: PME# disabled [52350.373088] pci 0000:15:00.5: PME# disabled [52350.492022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52350.495170] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52350.496313] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52350.504075] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52350.505206] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52350.507782] ata2.00: configured for UDMA/33 [52350.679257] sd 0:0:0:0: [sda] Starting disk [52351.220014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52351.226290] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52351.226292] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52351.226566] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52351.226568] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52351.229422] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52351.229424] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52351.229670] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52351.229671] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52351.230901] ata1.00: configured for UDMA/133 [52351.246679] ata1.00: configured for UDMA/133 [52351.246681] ata1: EH complete [52351.372014] usb 1-6: reset high speed USB device using ehci_hcd and address 3 [52351.510675] PM: resume devices took 1.612 seconds [52351.510698] PM: Finishing wakeup. [52351.510699] Restarting tasks ... done. [52352.376168] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52352.432050] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52352.432467] ADDRCONF(NETDEV_UP): eth0: link is not ready [52352.464729] Registered led device: iwl-phy0::radio [52352.464742] Registered led device: iwl-phy0::assoc [52352.464754] Registered led device: iwl-phy0::RX [52352.464764] Registered led device: iwl-phy0::TX [52352.470924] ADDRCONF(NETDEV_UP): wlan0: link is not ready [52352.660072] CPU0 attaching NULL sched-domain. [52352.660108] CPU0 attaching NULL sched-domain. [52353.104015] usb 4-2: new full speed USB device using uhci_hcd and address 6 [52353.275380] usb 4-2: configuration #1 chosen from 1 choice [52362.663239] SMP alternatives: switching to SMP code [52362.668097] Booting processor 1 APIC 0x1 ip 0x6000 [52349.088107] Initializing CPU#1 [52349.088107] Calibrating delay using timer specific routine.. 5587.30 BogoMIPS (lpj=11174617) [52349.088107] CPU: L1 I cache: 32K, L1 D cache: 32K [52349.088107] CPU: L2 cache: 6144K [52349.088107] CPU 1/0x1 -> Node 0 [52349.088107] CPU: Physical Processor ID: 0 [52349.088107] CPU: Processor Core ID: 1 [52362.757256] CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 [52362.757266] kvm: enabling virtualization on CPU1 [52362.760012] Switched to high resolution mode on CPU 1 [52362.763150] CPU0 attaching NULL sched-domain. [52362.781976] CPU0 attaching sched-domain: [52362.781980] domain 0: span 0-1 level MC [52362.781982] groups: 0 1 [52362.781985] domain 1: span 0-1 level CPU [52362.781987] groups: 0-1 (__cpu_power = 2048) [52362.781991] CPU1 attaching sched-domain: [52362.781992] domain 0: span 0-1 level MC [52362.781993] groups: 1 0 [52362.781996] domain 1: span 0-1 level CPU [52362.781997] groups: 0-1 (__cpu_power = 2048) [52626.969974] tun: Universal TUN/TAP device driver, 1.6 [52626.969981] tun: (C) 1999-2004 Max Krasnyansky [52626.973995] device vnet0 entered promiscuous mode [52626.975225] virbr0: topology change detected, propagating [52626.975234] virbr0: port 1(vnet0) entering forwarding state [52627.062301] virbr0: port 1(vnet0) entering disabled state [52627.077578] device vnet0 left promiscuous mode [52627.077589] virbr0: port 1(vnet0) entering disabled state [52634.139703] wlan0: direct probe to AP 00:11:88:89:85:f0 try 1 [52634.336109] wlan0: direct probe to AP 00:11:88:89:85:f0 try 2 [52634.536124] wlan0: direct probe to AP 00:11:88:89:85:f0 try 3 [52634.736292] wlan0: direct probe to AP 00:11:88:89:85:f0 timed out [52657.027226] device vnet0 entered promiscuous mode [52657.029020] virbr0: topology change detected, propagating [52657.029029] virbr0: port 1(vnet0) entering forwarding state [52666.616504] kvm: disabling virtualization on CPU1 [52666.618399] CPU 1 is now offline [52666.618402] SMP alternatives: switching to UP code [52666.624370] CPU0 attaching NULL sched-domain. [52666.624373] CPU1 attaching NULL sched-domain. [52666.624380] CPU0 attaching NULL sched-domain. [52667.010205] CPU0 attaching NULL sched-domain. [52667.010243] CPU0 attaching NULL sched-domain. [52667.168082] usb 4-2: USB disconnect, address 6 [52667.168275] btusb_intr_complete: hci0 urb ffff88008b09b840 failed to resubmit (19) [52667.168280] btusb_bulk_complete: hci0 urb ffff88008b09b6c0 failed to resubmit (19) [52667.169273] btusb_bulk_complete: hci0 urb ffff88008b09be40 failed to resubmit (19) [52667.169343] btusb_send_frame: hci0 urb ffff88008b05d600 submission failed [52667.724007] vnet0: no IPv6 routers present [52667.982115] PM: Syncing filesystems ... done. [52668.038869] PM: Preparing system for mem sleep [52668.038873] Freezing user space processes ... (elapsed 0.04 seconds) done. [52668.086678] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [52668.086707] PM: Entering mem sleep [52668.086719] Suspending console(s) (use no_console_suspend to debug) [52668.328034] sd 0:0:0:0: [sda] Synchronizing SCSI cache [52668.328153] sd 0:0:0:0: [sda] Stopping disk [52669.781208] ACPI handle has no context! [52669.781214] sdhci-pci 0000:15:00.2: PME# disabled [52669.781221] sdhci-pci 0000:15:00.2: PCI INT C disabled [52669.781226] ACPI handle has no context! [52669.801046] ACPI handle has no context! [52669.880117] ehci_hcd 0000:00:1d.7: PCI INT D disabled [52669.880123] uhci_hcd 0000:00:1d.2: PCI INT C disabled [52669.880128] uhci_hcd 0000:00:1d.1: PCI INT B disabled [52669.880133] uhci_hcd 0000:00:1d.0: PCI INT A disabled [52669.880136] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [52669.880138] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [52669.880141] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [52669.880143] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [52669.880150] HDA Intel 0000:00:1b.0: PCI INT B disabled [52669.896032] ehci_hcd 0000:00:1a.7: PCI INT D disabled [52669.896037] uhci_hcd 0000:00:1a.2: PCI INT C disabled [52669.896042] uhci_hcd 0000:00:1a.1: PCI INT B disabled [52669.896048] uhci_hcd 0000:00:1a.0: PCI INT A disabled [52669.896233] e1000e 0000:00:19.0: PCI INT A disabled [52669.896238] e1000e 0000:00:19.0: PME# enabled [52669.896242] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [52670.017828] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [52670.032089] i915 0000:00:02.0: power state changed by ACPI to D3 [52670.032135] PM: suspend devices took 1.948 seconds [52670.032250] ricoh-mmc: Suspending. [52670.032263] ricoh-mmc: Controller is now re-enabled. [52670.032430] ehci_hcd 0000:00:1d.7: PME# disabled [52670.080051] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [52670.112046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [52670.112240] ehci_hcd 0000:00:1a.7: PME# disabled [52670.160046] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [52670.192047] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [52670.296040] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [52670.440043] ACPI: Preparing to enter system sleep state S3 [52671.032124] Disabling non-boot CPUs ... [52671.032165] Extended CMOS year: 2000 [52671.032165] Back to C! [52671.032165] Extended CMOS year: 2000 [52671.032165] ACPI: Waking up from system sleep state S3 [52672.168106] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [52672.168125] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [52672.168134] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [52672.344041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [52672.344065] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52672.344097] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52672.376046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [52672.376069] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52672.376109] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52672.376127] ehci_hcd 0000:00:1a.7: PME# disabled [52672.376156] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [52672.376195] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52672.376245] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52672.376294] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52672.376344] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52672.408046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [52672.408070] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52672.408101] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52672.408133] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52672.408172] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52672.408189] ehci_hcd 0000:00:1d.7: PME# disabled [52672.408279] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [52672.408384] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [52672.424039] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52672.424045] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52672.440037] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52672.440043] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52672.440089] ricoh-mmc: Resuming. [52672.440102] ricoh-mmc: Controller is now disabled. [52672.577687] i915 0000:00:02.0: setting latency timer to 64 [52672.638319] [drm] LVDS-8: set mode 1920x1200 c [52672.658442] pci 0000:00:02.1: PME# disabled [52672.658454] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006) [52672.658527] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52672.658528] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [52672.658532] e1000e 0000:00:19.0: setting latency timer to 64 [52672.658537] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52672.658540] e1000e 0000:00:19.0: PME# disabled [52672.658541] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52672.658545] e1000e 0000:00:19.0: PME# disabled [52672.658577] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52672.711919] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52672.711924] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [52672.711944] usb usb3: root hub lost power or was reset [52672.711959] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [52672.711964] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [52672.711983] usb usb4: root hub lost power or was reset [52672.712011] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [52672.712015] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [52672.712035] usb usb5: root hub lost power or was reset [52672.712051] ehci_hcd 0000:00:1a.7: PME# disabled [52672.712054] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [52672.712059] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [52672.712112] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52672.712117] HDA Intel 0000:00:1b.0: setting latency timer to 64 [52672.712129] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [52672.712132] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [52672.712135] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [52672.712138] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [52672.712143] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [52672.712148] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [52672.712167] usb usb6: root hub lost power or was reset [52672.712182] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52672.712187] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [52672.712206] usb usb7: root hub lost power or was reset [52672.712220] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52672.712225] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [52672.712244] usb usb8: root hub lost power or was reset [52672.712259] ehci_hcd 0000:00:1d.7: PME# disabled [52672.712262] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [52672.712267] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [52672.712276] pci 0000:00:1e.0: setting latency timer to 64 [52672.712331] ahci 0000:00:1f.2: setting latency timer to 64 [52672.910007] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [52672.916072] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52672.916075] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [52672.917080] pci 0000:15:00.4: PME# disabled [52672.917085] pci 0000:15:00.5: PME# disabled [52673.036023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52673.039226] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52673.040361] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52673.048151] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52673.049283] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52673.051851] ata2.00: configured for UDMA/33 [52673.222590] sd 0:0:0:0: [sda] Starting disk [52673.820015] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52673.825791] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52673.825793] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52673.826066] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52673.826068] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52673.828923] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52673.828925] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52673.829170] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52673.829172] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52673.830402] ata1.00: configured for UDMA/133 [52673.846700] ata1.00: configured for UDMA/133 [52673.846701] ata1: EH complete [52673.968011] usb 1-6: reset high speed USB device using ehci_hcd and address 3 [52674.106640] PM: resume devices took 1.664 seconds [52674.106664] PM: Finishing wakeup. [52674.106665] Restarting tasks ... done. [52675.612162] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52675.668047] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52675.668453] ADDRCONF(NETDEV_UP): eth0: link is not ready [52675.710673] Registered led device: iwl-phy0::radio [52675.710685] Registered led device: iwl-phy0::assoc [52675.710698] Registered led device: iwl-phy0::RX [52675.710709] Registered led device: iwl-phy0::TX [52675.718464] ADDRCONF(NETDEV_UP): wlan0: link is not ready [52676.348228] usb 4-2: new full speed USB device using uhci_hcd and address 7 [52676.438473] CPU0 attaching NULL sched-domain. [52676.438513] CPU0 attaching NULL sched-domain. [52676.520383] usb 4-2: configuration #1 chosen from 1 choice [52678.859191] kvm: emulating exchange as write [52686.474748] SMP alternatives: switching to SMP code [52686.479654] Booting processor 1 APIC 0x1 ip 0x6000 [52671.632108] Initializing CPU#1 [52671.632108] Calibrating delay using timer specific routine.. 5587.11 BogoMIPS (lpj=11174237) [52671.632108] CPU: L1 I cache: 32K, L1 D cache: 32K [52671.632108] CPU: L2 cache: 6144K [52671.632108] CPU 1/0x1 -> Node 0 [52671.632108] CPU: Physical Processor ID: 0 [52671.632108] CPU: Processor Core ID: 1 [52686.569312] CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 [52686.569321] kvm: enabling virtualization on CPU1 [52686.571951] CPU0 attaching NULL sched-domain. [52686.572011] Switched to high resolution mode on CPU 1 [52686.584042] CPU0 attaching sched-domain: [52686.584048] domain 0: span 0-1 level MC [52686.584051] groups: 0 1 [52686.584056] domain 1: span 0-1 level CPU [52686.584059] groups: 0-1 (__cpu_power = 2048) [52686.584066] CPU1 attaching sched-domain: [52686.584068] domain 0: span 0-1 level MC [52686.584071] groups: 1 0 [52686.584075] domain 1: span 0-1 level CPU [52686.584078] groups: 0-1 (__cpu_power = 2048) [52807.107403] kvm: disabling virtualization on CPU1 [52807.107451] CPU 1 is now offline [52807.107453] SMP alternatives: switching to UP code [52807.112983] CPU0 attaching NULL sched-domain. [52807.112986] CPU1 attaching NULL sched-domain. [52807.112993] CPU0 attaching NULL sched-domain. [52807.223702] CPU0 attaching NULL sched-domain. [52807.223737] CPU0 attaching NULL sched-domain. [52807.288043] usb 4-2: USB disconnect, address 7 [52807.288876] btusb_intr_complete: hci0 urb ffff8800b0dd80c0 failed to resubmit (19) [52807.288880] btusb_bulk_complete: hci0 urb ffff8800860d0780 failed to resubmit (19) [52807.289893] btusb_bulk_complete: hci0 urb ffff8800b0dd8300 failed to resubmit (19) [52807.289959] btusb_send_frame: hci0 urb ffff88008b09bf00 submission failed [52807.733008] PM: Syncing filesystems ... done. [52807.886230] PM: Preparing system for mem sleep [52807.886233] Freezing user space processes ... (elapsed 0.04 seconds) done. [52807.926878] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [52807.926907] PM: Entering mem sleep [52807.926920] Suspending console(s) (use no_console_suspend to debug) [52808.176039] sd 0:0:0:0: [sda] Synchronizing SCSI cache [52808.176144] sd 0:0:0:0: [sda] Stopping disk [52809.633306] ACPI handle has no context! [52809.633311] sdhci-pci 0000:15:00.2: PME# disabled [52809.633319] sdhci-pci 0000:15:00.2: PCI INT C disabled [52809.633324] ACPI handle has no context! [52809.653052] ACPI handle has no context! [52809.732031] ehci_hcd 0000:00:1d.7: PCI INT D disabled [52809.732037] uhci_hcd 0000:00:1d.2: PCI INT C disabled [52809.732042] uhci_hcd 0000:00:1d.1: PCI INT B disabled [52809.732047] uhci_hcd 0000:00:1d.0: PCI INT A disabled [52809.732050] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [52809.732052] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [52809.732055] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [52809.732057] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [52809.748294] HDA Intel 0000:00:1b.0: PCI INT B disabled [52809.764032] ehci_hcd 0000:00:1a.7: PCI INT D disabled [52809.764037] uhci_hcd 0000:00:1a.2: PCI INT C disabled [52809.764042] uhci_hcd 0000:00:1a.1: PCI INT B disabled [52809.764047] uhci_hcd 0000:00:1a.0: PCI INT A disabled [52809.764233] e1000e 0000:00:19.0: PCI INT A disabled [52809.764237] e1000e 0000:00:19.0: PME# enabled [52809.764242] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [52809.870721] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [52809.884090] i915 0000:00:02.0: power state changed by ACPI to D3 [52809.884135] PM: suspend devices took 1.960 seconds [52809.884253] ricoh-mmc: Suspending. [52809.884266] ricoh-mmc: Controller is now re-enabled. [52809.884434] ehci_hcd 0000:00:1d.7: PME# disabled [52809.932050] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [52809.964046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [52809.964240] ehci_hcd 0000:00:1a.7: PME# disabled [52810.012046] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [52810.044046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [52810.156040] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [52810.300044] ACPI: Preparing to enter system sleep state S3 [52810.884124] Disabling non-boot CPUs ... [52810.884164] Extended CMOS year: 2000 [52810.884164] Back to C! [52810.884164] Extended CMOS year: 2000 [52810.884164] ACPI: Waking up from system sleep state S3 [52812.020106] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [52812.020125] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [52812.020134] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [52812.196042] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [52812.196066] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52812.196099] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52812.228045] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [52812.228069] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52812.228109] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52812.228127] ehci_hcd 0000:00:1a.7: PME# disabled [52812.228156] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [52812.228194] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52812.228244] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52812.228294] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52812.228343] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [52812.260046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [52812.260070] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52812.260101] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52812.260133] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [52812.260172] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [52812.260189] ehci_hcd 0000:00:1d.7: PME# disabled [52812.260279] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [52812.260384] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [52812.276038] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52812.276044] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52812.292037] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [52812.292043] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [52812.292090] ricoh-mmc: Resuming. [52812.292102] ricoh-mmc: Controller is now disabled. [52812.437856] i915 0000:00:02.0: setting latency timer to 64 [52812.498478] [drm] LVDS-8: set mode 1920x1200 c [52812.518511] pci 0000:00:02.1: PME# disabled [52812.518524] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006) [52812.518604] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52812.518606] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [52812.518609] e1000e 0000:00:19.0: setting latency timer to 64 [52812.518614] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52812.518617] e1000e 0000:00:19.0: PME# disabled [52812.518619] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [52812.518622] e1000e 0000:00:19.0: PME# disabled [52812.518654] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52812.571919] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [52812.571924] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [52812.571943] usb usb3: root hub lost power or was reset [52812.571959] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [52812.571964] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [52812.571983] usb usb4: root hub lost power or was reset [52812.572010] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [52812.572015] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [52812.572034] usb usb5: root hub lost power or was reset [52812.572050] ehci_hcd 0000:00:1a.7: PME# disabled [52812.572053] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [52812.572058] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [52812.572111] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52812.572116] HDA Intel 0000:00:1b.0: setting latency timer to 64 [52812.663004] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [52812.663007] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [52812.663010] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [52812.663013] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [52812.663018] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [52812.663023] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [52812.663042] usb usb6: root hub lost power or was reset [52812.663059] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52812.663064] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [52812.663083] usb usb7: root hub lost power or was reset [52812.663101] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52812.663106] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [52812.663125] usb usb8: root hub lost power or was reset [52812.663143] ehci_hcd 0000:00:1d.7: PME# disabled [52812.663147] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [52812.663152] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [52812.663163] pci 0000:00:1e.0: setting latency timer to 64 [52812.663228] ahci 0000:00:1f.2: setting latency timer to 64 [52812.858008] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [52812.864074] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [52812.864076] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [52812.865082] pci 0000:15:00.4: PME# disabled [52812.865086] pci 0000:15:00.5: PME# disabled [52812.984022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52812.987209] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52812.988349] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52812.996072] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [52812.997211] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [52812.999776] ata2.00: configured for UDMA/33 [52813.170333] sd 0:0:0:0: [sda] Starting disk [52813.600013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52813.605681] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52813.605683] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52813.605957] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52813.605960] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52813.608809] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [52813.608811] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [52813.609058] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [52813.609059] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [52813.610288] ata1.00: configured for UDMA/133 [52813.626698] ata1.00: configured for UDMA/133 [52813.626700] ata1: EH complete [52813.748012] usb 1-6: reset high speed USB device using ehci_hcd and address 3 [52813.886704] PM: resume devices took 1.592 seconds [52813.886728] PM: Finishing wakeup. [52813.886729] Restarting tasks ... done. [52814.880228] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52814.936073] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [52814.936497] ADDRCONF(NETDEV_UP): eth0: link is not ready [52814.968866] Registered led device: iwl-phy0::radio [52814.968878] Registered led device: iwl-phy0::assoc [52814.968889] Registered led device: iwl-phy0::RX [52814.968899] Registered led device: iwl-phy0::TX [52814.975960] ADDRCONF(NETDEV_UP): wlan0: link is not ready [52815.580026] usb 4-2: new full speed USB device using uhci_hcd and address 8 [52815.592148] CPU0 attaching NULL sched-domain. [52815.592186] CPU0 attaching NULL sched-domain. [52815.751379] usb 4-2: configuration #1 chosen from 1 choice [52825.595693] SMP alternatives: switching to SMP code [52825.600571] Booting processor 1 APIC 0x1 ip 0x6000 [52811.484108] Initializing CPU#1 [52811.484108] Calibrating delay using timer specific routine.. 5586.79 BogoMIPS (lpj=11173591) [52811.484108] CPU: L1 I cache: 32K, L1 D cache: 32K [52811.484108] CPU: L2 cache: 6144K [52811.484108] CPU 1/0x1 -> Node 0 [52811.484108] CPU: Physical Processor ID: 0 [52811.484108] CPU: Processor Core ID: 1 [52825.689333] CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 [52825.689342] kvm: enabling virtualization on CPU1 [52825.691526] CPU0 attaching NULL sched-domain. [52825.692010] Switched to high resolution mode on CPU 1 [52825.704086] CPU0 attaching sched-domain: [52825.704091] domain 0: span 0-1 level MC [52825.704094] groups: 0 1 [52825.704099] domain 1: span 0-1 level CPU [52825.704103] groups: 0-1 (__cpu_power = 2048) [52825.704109] CPU1 attaching sched-domain: [52825.704111] domain 0: span 0-1 level MC [52825.704114] groups: 1 0 [52825.704118] domain 1: span 0-1 level CPU [52825.704121] groups: 0-1 (__cpu_power = 2048) [52889.475437] wlan0: authenticate with AP 00:11:88:89:85:f0 [52889.672095] wlan0: authenticate with AP 00:11:88:89:85:f0 [52889.872168] wlan0: authenticate with AP 00:11:88:89:85:f0 [52889.873963] wlan0: authenticated [52889.873970] wlan0: associate with AP 00:11:88:89:85:f0 [52890.072060] wlan0: associate with AP 00:11:88:89:85:f0 [52890.272269] wlan0: associate with AP 00:11:88:89:85:f0 [52890.282867] wlan0: RX AssocResp from 00:11:88:89:85:f0 (capab=0x421 status=0 aid=3) [52890.282876] wlan0: associated [52890.295934] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [52890.378665] cfg80211: Calling CRDA for country: US [52890.383440] cfg80211: Received country IE: [52890.383446] cfg80211: Regulatory domain: US [52890.383450] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [52890.383458] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [52890.383462] cfg80211: CRDA thinks this should applied: [52890.383467] cfg80211: Regulatory domain: US [52890.383470] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [52890.383477] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [52890.383484] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [52890.383490] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [52890.383497] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [52890.383503] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [52890.383507] cfg80211: We intersect both of these and get: [52890.383511] cfg80211: Regulatory domain: 98 [52890.383515] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [52890.383522] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [52890.383532] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [52890.383537] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [52890.383543] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [52890.383549] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [52890.383555] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [52890.383562] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [52890.383568] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [52890.383574] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [52890.383580] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [52890.383586] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [52890.383592] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [52890.383598] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [52890.383604] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [52890.383610] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [52890.383616] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [52890.383622] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [52890.383628] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [52890.383634] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [52890.383640] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [52890.383646] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [52890.383652] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [52890.383658] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE [52890.383664] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE [52890.383670] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE [52890.383676] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE [52890.383682] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE [52890.383694] cfg80211: Current regulatory domain updated by AP to: US [52890.383699] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [52890.383705] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [52901.036028] wlan0: no IPv6 routers present [53075.227301] kvm: disabling virtualization on CPU1 [53075.227446] CPU 1 is now offline [53075.227450] SMP alternatives: switching to UP code [53075.233069] CPU0 attaching NULL sched-domain. [53075.233073] CPU1 attaching NULL sched-domain. [53075.233080] CPU0 attaching NULL sched-domain. [53075.318836] CPU0 attaching NULL sched-domain. [53075.318874] CPU0 attaching NULL sched-domain. [53075.376044] usb 4-2: USB disconnect, address 8 [53075.376474] btusb_intr_complete: hci0 urb ffff88008b09b840 failed to resubmit (19) [53075.376478] btusb_bulk_complete: hci0 urb ffff88008b09b240 failed to resubmit (19) [53075.377472] btusb_bulk_complete: hci0 urb ffff88008b09bf00 failed to resubmit (19) [53075.377542] btusb_send_frame: hci0 urb ffff88007a197480 submission failed [53075.468933] wlan0: disassociating by local choice (reason=3) [53075.482197] wlan0: deauthenticating by local choice (reason=3) [53076.072448] PM: Syncing filesystems ... done. [53076.125315] PM: Preparing system for mem sleep [53076.125320] Freezing user space processes ... (elapsed 0.03 seconds) done. [53076.163763] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [53076.163793] PM: Entering mem sleep [53076.163804] Suspending console(s) (use no_console_suspend to debug) [53076.396038] sd 0:0:0:0: [sda] Synchronizing SCSI cache [53076.396152] sd 0:0:0:0: [sda] Stopping disk [53077.861408] ACPI handle has no context! [53077.861414] sdhci-pci 0000:15:00.2: PME# disabled [53077.861421] sdhci-pci 0000:15:00.2: PCI INT C disabled [53077.861427] ACPI handle has no context! [53077.881045] ACPI handle has no context! [53077.960034] ehci_hcd 0000:00:1d.7: PCI INT D disabled [53077.960040] uhci_hcd 0000:00:1d.2: PCI INT C disabled [53077.960045] uhci_hcd 0000:00:1d.1: PCI INT B disabled [53077.960050] uhci_hcd 0000:00:1d.0: PCI INT A disabled [53077.960053] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [53077.960055] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [53077.960058] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [53077.960060] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [53077.976281] HDA Intel 0000:00:1b.0: PCI INT B disabled [53077.992032] ehci_hcd 0000:00:1a.7: PCI INT D disabled [53077.992037] uhci_hcd 0000:00:1a.2: PCI INT C disabled [53077.992042] uhci_hcd 0000:00:1a.1: PCI INT B disabled [53077.992048] uhci_hcd 0000:00:1a.0: PCI INT A disabled [53077.992234] e1000e 0000:00:19.0: PCI INT A disabled [53077.992238] e1000e 0000:00:19.0: PME# enabled [53077.992243] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [53078.130459] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [53078.144091] i915 0000:00:02.0: power state changed by ACPI to D3 [53078.144142] PM: suspend devices took 1.984 seconds [53078.144258] ricoh-mmc: Suspending. [53078.144270] ricoh-mmc: Controller is now re-enabled. [53078.144437] ehci_hcd 0000:00:1d.7: PME# disabled [53078.192051] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [53078.232046] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [53078.232241] ehci_hcd 0000:00:1a.7: PME# disabled [53078.280047] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [53078.312046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [53078.416041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [53078.560043] ACPI: Preparing to enter system sleep state S3 [53079.144126] Disabling non-boot CPUs ... [53079.144166] Extended CMOS year: 2000 [53079.144166] Back to C! [53079.144166] Extended CMOS year: 2000 [53079.144166] ACPI: Waking up from system sleep state S3 [53080.384106] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [53080.384125] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [53080.384134] heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [53080.560041] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [53080.560065] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [53080.560097] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [53080.592046] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [53080.592069] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [53080.592109] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [53080.592127] ehci_hcd 0000:00:1a.7: PME# disabled [53080.592156] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [53080.592194] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [53080.592244] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [53080.592294] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [53080.592343] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [53080.624045] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [53080.624069] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [53080.624100] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [53080.624131] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [53080.624171] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [53080.624188] ehci_hcd 0000:00:1d.7: PME# disabled [53080.624277] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [53080.624383] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [53080.640038] ohci1394 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [53080.640044] ohci1394 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [53080.656037] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [53080.656043] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [53080.656090] ricoh-mmc: Resuming. [53080.656102] ricoh-mmc: Controller is now disabled. [53080.792848] i915 0000:00:02.0: setting latency timer to 64 [53080.853531] [drm] LVDS-8: set mode 1920x1200 c [53080.873657] pci 0000:00:02.1: PME# disabled [53080.873670] heci 0000:00:03.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006) [53080.873742] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [53080.873744] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [53080.873748] e1000e 0000:00:19.0: setting latency timer to 64 [53080.873753] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [53080.873756] e1000e 0000:00:19.0: PME# disabled [53080.873757] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [53080.873761] e1000e 0000:00:19.0: PME# disabled [53080.873792] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [53080.923918] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [53080.923923] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [53080.923944] usb usb3: root hub lost power or was reset [53080.923959] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [53080.923964] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [53080.923983] usb usb4: root hub lost power or was reset [53080.924010] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [53080.924015] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [53080.924034] usb usb5: root hub lost power or was reset [53080.924050] ehci_hcd 0000:00:1a.7: PME# disabled [53080.924053] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [53080.924058] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [53080.924111] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [53080.924115] HDA Intel 0000:00:1b.0: setting latency timer to 64 [53081.015338] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [53081.015342] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [53081.015345] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [53081.015347] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [53081.015353] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [53081.015358] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [53081.015377] usb usb6: root hub lost power or was reset [53081.015394] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [53081.015399] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [53081.015418] usb usb7: root hub lost power or was reset [53081.015436] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [53081.015440] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [53081.015459] usb usb8: root hub lost power or was reset [53081.015477] ehci_hcd 0000:00:1d.7: PME# disabled [53081.015481] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [53081.015486] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [53081.015498] pci 0000:00:1e.0: setting latency timer to 64 [53081.015561] ahci 0000:00:1f.2: setting latency timer to 64 [53081.210006] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] [53081.216072] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [53081.216074] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [53081.217081] pci 0000:15:00.4: PME# disabled [53081.217084] pci 0000:15:00.5: PME# disabled [53081.336020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [53081.339141] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [53081.340284] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [53081.348137] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [53081.349279] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [53081.351854] ata2.00: configured for UDMA/33 [53081.522744] sd 0:0:0:0: [sda] Starting disk [53081.840014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [53081.850721] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [53081.850723] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [53081.850998] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [53081.851000] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [53081.853855] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [53081.853857] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [53081.854104] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [53081.854106] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [53081.855335] ata1.00: configured for UDMA/133 [53081.870681] ata1.00: configured for UDMA/133 [53081.870682] ata1: EH complete [53081.996012] usb 1-6: reset high speed USB device using ehci_hcd and address 3 [53082.135452] PM: resume devices took 1.476 seconds [53082.135475] PM: Finishing wakeup. [53082.135476] Restarting tasks ... done. [53082.544541] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [53082.601044] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [53082.601465] ADDRCONF(NETDEV_UP): eth0: link is not ready [53082.632958] Registered led device: iwl-phy0::radio [53082.632970] Registered led device: iwl-phy0::assoc [53082.632980] Registered led device: iwl-phy0::RX [53082.632992] Registered led device: iwl-phy0::TX [53082.651548] ADDRCONF(NETDEV_UP): wlan0: link is not ready [53082.655196] wlan0: direct probe to AP 00:11:50:6d:b8:f8 try 1 [53082.853975] wlan0: direct probe to AP 00:11:50:6d:b8:f8 try 2 [53083.052020] wlan0: direct probe to AP 00:11:50:6d:b8:f8 try 3 [53083.252028] wlan0: direct probe to AP 00:11:50:6d:b8:f8 timed out [53083.276064] usb 4-2: new full speed USB device using uhci_hcd and address 9 [53083.420998] CPU0 attaching NULL sched-domain. [53083.421037] CPU0 attaching NULL sched-domain. [53083.447381] usb 4-2: configuration #1 chosen from 1 choice [53084.142869] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [53084.209963] CPU0 attaching NULL sched-domain. [53084.210001] CPU0 attaching NULL sched-domain. [53084.218897] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [53084.218902] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [53085.100764] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [53085.101135] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [53093.463967] SMP alternatives: switching to SMP code [53093.468859] Booting processor 1 APIC 0x1 ip 0x6000 [53079.744109] Initializing CPU#1 [53079.744109] Calibrating delay using timer specific routine.. 7529.13 BogoMIPS (lpj=15058267) [53079.744109] CPU: L1 I cache: 32K, L1 D cache: 32K [53079.744109] CPU: L2 cache: 6144K [53079.744109] CPU 1/0x1 -> Node 0 [53079.744109] CPU: Physical Processor ID: 0 [53079.744109] CPU: Processor Core ID: 1 [53093.568018] Switched to high resolution mode on CPU 1 [53093.575451] CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 [53093.575459] kvm: enabling virtualization on CPU1 [53093.582164] CPU0 attaching NULL sched-domain. [53093.582355] thinkpad_acpi: EC reports that Thermal Table has changed [53093.603264] CPU0 attaching sched-domain: [53093.603268] domain 0: span 0-1 level MC [53093.603270] groups: 0 1 [53093.603274] CPU1 attaching sched-domain: [53093.603275] domain 0: span 0-1 level MC [53093.603277] groups: 1 0 [53094.392751] wlan0: authenticate with AP 00:18:0a:30:00:a3 [53094.401708] wlan0: authenticated [53094.401715] wlan0: associate with AP 00:18:0a:30:00:a3 [53094.427545] wlan0: RX AssocResp from 00:18:0a:30:00:a3 (capab=0x1 status=0 aid=3) [53094.427553] wlan0: associated [53094.435420] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [53095.472019] eth0: no IPv6 routers present [53105.400104] wlan0: no IPv6 routers present [53748.824070] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [54312.393876] CPU0 attaching NULL sched-domain. [54312.393883] CPU1 attaching NULL sched-domain. [54312.404213] CPU0 attaching sched-domain: [54312.404221] domain 0: span 0-1 level MC [54312.404227] groups: 0 1 [54312.404237] domain 1: span 0-1 level CPU [54312.404243] groups: 0-1 (__cpu_power = 2048) [54312.404255] CPU1 attaching sched-domain: [54312.404260] domain 0: span 0-1 level MC [54312.404265] groups: 1 0 [54312.404274] domain 1: span 0-1 level CPU [54312.404280] groups: 0-1 (__cpu_power = 2048) [54321.328113] usb 4-2: USB disconnect, address 9 [54321.328235] btusb_intr_complete: hci0 urb ffff880018de3540 failed to resubmit (19) [54321.328251] btusb_bulk_complete: hci0 urb ffff880018de30c0 failed to resubmit (19) [54321.329255] btusb_bulk_complete: hci0 urb ffff880018de3180 failed to resubmit (19) [54321.329476] btusb_send_frame: hci0 urb ffff88007dd69180 submission failed [54864.438907] virbr0: port 1(vnet0) entering disabled state [54864.448944] device vnet0 left promiscuous mode [54864.448947] virbr0: port 1(vnet0) entering disabled state [55598.287092] [drm] DAC-6: set mode 14 [55685.143791] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [55685.143795] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [55685.161153] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [55863.692931] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [55863.692937] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [55863.733133] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [56232.326040] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [56232.326045] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [56232.344610] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [56903.648146] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [56903.648151] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [56903.667010] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [57154.620901] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [57154.620906] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [57154.639129] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [57271.250500] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [57271.250505] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [57271.268099] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [57273.265313] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [57273.265318] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [57273.304913] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [57319.327210] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [57319.327215] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [57319.345468] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [57362.328658] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [57362.328663] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [57362.347148] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [57524.125816] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [57524.125822] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [57524.216471] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [58380.953427] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [58380.953433] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [58380.993325] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [58568.665431] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [58568.665436] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [58568.682616] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [58856.673990] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [58856.673994] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [58856.691246] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [59169.691139] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [59169.691144] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [59169.708730] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 [59198.964325] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty [59198.964330] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -28 [59198.981537] [drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1