Linux version 2.6.31-rc3-git3 (root@server) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #1 SMP Mon Jul 20 17:18:42 EEST 2009 Command line: root=/dev/sda2 irqpoll KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7ee0000 (usable) BIOS-e820: 00000000d7ee0000 - 00000000d7ee3000 (ACPI NVS) BIOS-e820: 00000000d7ee3000 - 00000000d7ef0000 (ACPI data) BIOS-e820: 00000000d7ef0000 - 00000000d7f00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000128000000 (usable) DMI 2.3 present. last_pfn = 0x128000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFF0000000 write-back 3 base 00D0000000 mask FFF8000000 write-back 4 base 00D7F00000 mask FFFFF00000 uncachable 5 base 0100000000 mask FFE0000000 write-back 6 base 0120000000 mask FFF8000000 write-back 7 disabled TOM2: 0000000128000000 aka 4736M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d7f00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xd7ee0 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000d7ee0000 (usable) modified: 00000000d7ee0000 - 00000000d7ee3000 (ACPI NVS) modified: 00000000d7ee3000 - 00000000d7ef0000 (ACPI data) modified: 00000000d7ef0000 - 00000000d7f00000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000128000000 (usable) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000d7ee0000 0000000000 - 00d7e00000 page 2M 00d7e00000 - 00d7ee0000 page 4k kernel direct mapping tables up to d7ee0000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000128000000 0100000000 - 0128000000 page 2M kernel direct mapping tables up to 128000000 @ c000-12000 ACPI: RSDP 00000000000f6c70 00014 (v00 GBT ) ACPI: RSDT 00000000d7ee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000d7ee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000d7ee30c0 0406A (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000d7ee0000 00040 ACPI: SSDT 00000000d7ee7200 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000d7ee7400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000d7ee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 00000000d7ee7140 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0128000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00019c1c7c] TEXT DATA BSS ==> [0001000000 - 00019c1c7c] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [00019c2000 - 00019c2092] BRK ==> [00019c2000 - 00019c2092] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00128000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x000d7ee0 0: 0x00100000 -> 0x00128000 On node 0 totalpages: 1048186 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3834 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 866072 pages, LIFO batch:31 Normal zone: 2240 pages used for memmap Normal zone: 161600 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880028022000, static data 72736 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031506 Kernel command line: root=/dev/sda2 irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ fffe000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 4050100k/4849664k available (6005k kernel code, 656920k absent, 141700k reserved, 2856k data, 496k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 NR_IRQS:384 Fast TSC calibration using PIT Detected 1908.541 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3817.08 BogoMIPS (lpj=1908541) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 00d7f00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2300 stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3817.39 BogoMIPS (lpj=1908698) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2300 stepping 02 Brought up 2 CPUs Total of 2 processors activated (7634.47 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 xor: automatically using best checksumming function: generic_sse generic_sse: 5872.000 MB/sec xor: using function: generic_sse (5872.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [c000, ffff] TOM: 00000000d8000000 aka 3456M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d8000000, fe02ffff] node 0 link 0: mmio [e0000000, efffffff] TOM2: 0000000128000000 aka 4736M bus: [00,03] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [d8000000, ffffffff] bus: 00 index 3 mmio: [128000000, fcffffffff] ACPI: bus type pci registered dca service started, version 1.8 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07] pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03] pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07] pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03] pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff] pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0xde00-0xdeff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xfdee0000-0xfdeeffff] pci 0000:01:00.1: supports D1 D2 pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:02.0: bridge io port: [0xd000-0xdfff] pci 0000:00:02.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:02:00.0: reg 10 io port: [0xee00-0xeeff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfddff000-0xfddfffff] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0a.0: bridge io port: [0xe000-0xefff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] pci 0000:03:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff] pci 0000:03:0e.0: reg 14 32bit mmio: [0xfdcf8000-0xfdcfbfff] pci 0000:03:0e.0: supports D1 D2 pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:0e.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 1261 MB/s raid6: int64x2 2046 MB/s raid6: int64x4 1671 MB/s raid6: int64x8 1550 MB/s raid6: sse2x1 2640 MB/s raid6: sse2x2 3566 MB/s raid6: sse2x4 3714 MB/s raid6: using algorithm sse2x4 (3714 MB/s) PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0a: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0a: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0a: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp 00:0a: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x220-0x225 has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:02: ioport range 0x4100-0x411f has been reserved system 00:02: ioport range 0x228-0x22f has been reserved system 00:02: ioport range 0x40b-0x40b has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:02: ioport range 0xc00-0xc01 has been reserved system 00:02: ioport range 0xc14-0xc14 has been reserved system 00:02: ioport range 0xc50-0xc52 has been reserved system 00:02: ioport range 0xc6c-0xc6d has been reserved system 00:02: ioport range 0xc6f-0xc6f has been reserved system 00:02: ioport range 0xcd0-0xcd1 has been reserved system 00:02: ioport range 0xcd2-0xcd3 has been reserved system 00:02: ioport range 0xcd4-0xcdf has been reserved system 00:02: ioport range 0x4000-0x40fe has been reserved system 00:02: ioport range 0x4210-0x4217 has been reserved system 00:02: ioport range 0xb00-0xb1f could not be reserved system 00:02: ioport range 0x238-0x23f has been reserved system 00:0a: iomem range 0xf0000-0xf3fff could not be reserved system 00:0a: iomem range 0xf4000-0xf7fff could not be reserved system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved system 00:0a: iomem range 0xfc000-0xfffff could not be reserved system 00:0a: iomem range 0xd7ee0000-0xd7efffff could not be reserved system 00:0a: iomem range 0x0-0x9ffff could not be reserved system 00:0a: iomem range 0x100000-0xd7edffff could not be reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xd000-0xdfff pci 0000:00:02.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:02.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0xe000-0xefff pci 0000:00:0a.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 pci 0000:00:14.4: IO window: 0xc000-0xcfff pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Scanning for low memory corruption every 60 seconds Intel AES-NI instructions are not detected. HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) fuse init (API version 7.12) JFS: nTxBlock = 8192, nTxLock = 65536 msgmni has been set to 7912 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) alg: No test for stdrng (ansi_cprng) async_tx: api initialized (async) io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:0a.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:0a.0: setting latency timer to 64 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Platform driver 'serial8250' needs updating - please use dev_pm_ops 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 26 for MSI/MSI-X eth0: RTL8168b/8111b at 0xffffc90000044000, 00:1d:7d:01:db:41, XID 38000000 IRQ 26 console [netcon0] enabled netconsole: network logging started firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI version 1.10 usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc3-git3 ehci_hcd usb usb1: SerialNumber: 0000:00:13.5 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd usb usb4: SerialNumber: 0000:00:13.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd usb usb5: SerialNumber: 0000:00:13.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31-rc3-git3 ohci_hcd usb usb6: SerialNumber: 0000:00:13.4 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu HIFN supports only 32-bit addresses. usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.20. HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input2 ALSA device list: #0: HDA ATI SB at 0xfe024000 irq 16 TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2300 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xb (1900 MHz), vid 0xc powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xd powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x16 rtc_cmos 00:05: setting system clock to 2009-07-29 07:22:21 UTC (1248852141) ata1: softreset failed (device not ready) ata1: failed due to HW bug, retry pmp=0 usb 3-2: new low speed USB device using ohci_hcd and address 2 firewire_core: created device fw0: GUID 00cee06100001a4d, S400 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: HPA detected: current 312579695, native 312581808 ata1.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 sda1 sda2 sda3 sda4 < sda5 usb 3-2: New USB device found, idVendor=046d, idProduct=c517 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Receiver usb 3-2: Manufacturer: Logitech usb 3-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3 logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-2/input0 sda6 logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.1/input/input4 logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2/input1 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. REISERFS (device sda2): found reiserfs format "3.6" with standard journal REISERFS (device sda2): using ordered data mode REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda2): checking transaction log (sda2) REISERFS (device sda2): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:2. Freeing unused kernel memory: 496k freed udev: starting version 141 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [drm] Initialized drm 1.1.0 20060810 [drm] radeon default to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:00.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFDEF0000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [drm] Clocks initialized ! [drm] radeon: 1 pipes initialized. [drm] radeon: VRAM 128M [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x08000000 to 0x27FFFFFF [drm] radeon: irq initialized. [TTM] TTM available graphics memory: 1978 MiB [TTM] TTM available object memory: 1978 MiB [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCIE GART of 512M enabled (table at 0x00040000). [drm] radeon: cp idle (0x10000C03) [drm] Loading R300 Microcode [drm] radeon: ring at 0x0000000008000000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Default TV standard: NTSC [drm] 27.000000000 MHz TV ref clk [drm] DFP table revision: 4 [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] DVI-I [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 i2c-adapter i2c-2: unable to read EDID block. radeon 0000:01:00.0: DVI-I-1: no EDID data [drm] fb mappable at 0xD80C0000 [drm] vram apper at 0xD8000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 fb0: radeondrmfb frame buffer device registered panic notifier [drm] radeon: kernel modesetting successfully initialized. [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 REISERFS (device sda7): found reiserfs format "3.6" with standard journal REISERFS (device sda7): using ordered data mode REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda7): checking transaction log (sda7) REISERFS (device sda7): Using r5 hash to sort names REISERFS (device sda6): found reiserfs format "3.6" with standard journal REISERFS (device sda6): using ordered data mode REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda6): checking transaction log (sda6) REISERFS (device sda6): Using r5 hash to sort names REISERFS (device loop0): found reiserfs format "3.6" with standard journal REISERFS (device loop0): using ordered data mode REISERFS (device loop0): journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device loop0): checking transaction log (loop0) REISERFS (device loop0): Using r5 hash to sort names r8169: eth0: link up r8169: eth0: link up Adding 3911816k swap on /dev/sda3. Priority:-1 extents:1 across:3911816k it87: Found IT8718F chip at 0x228, revision 4 it87: in3 is VCC (+5V) eth0: no IPv6 routers present