Linux version 2.6.30-gentoo-r4 (root@carbon) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #9 Sat Aug 1 08:57:03 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable) BIOS-e820: 000000001fdf0000 - 000000001fdfb000 (ACPI data) BIOS-e820: 000000001fdfb000 - 000000001fe00000 (ACPI NVS) BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x1fdf0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 01FE00000 mask FFFE00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000001fdf0000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001fdf0000 page 4k kernel direct mapping tables up to 1fdf0000 @ 10000-15000 ACPI: RSDP 000f7ae0 00014 (v00 SONY ) ACPI: RSDT 1fdf6d58 0002C (v01 SONY F0 20040119 PTL 00000000) ACPI: FACP 1fdfaf3c 00074 (v01 SONY F0 20040119 PTL 01000000) ACPI: DSDT 1fdf6d84 041B8 (v01 SONY F0 20040119 PTL 0100000E) ACPI: FACS 1fdfbfc0 00040 ACPI: APIC 1fdfafb0 00050 (v01 SONY F0 20040119 PTL 00000000) 509MB LOWMEM available. mapped low ram: 0 - 1fdf0000 low ram: 0 - 1fdf0000 node 0 low ram: 00000000 - 1fdf0000 node 0 bootmap 00011000 - 00014fc0 (6 early reservations) ==> bootmem [0000000000 - 001fdf0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00004efdb8] TEXT DATA BSS ==> [0000100000 - 00004efdb8] #2 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #3 [00004f0000 - 00004f20f0] BRK ==> [00004f0000 - 00004f20f0] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0001fdf0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0001fdf0 On node 0 totalpages: 130431 free_area_init_node: node 0, pgdat c04449e0, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 988 pages used for memmap Normal zone: 125460 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129411 Kernel command line: root=/dev/hda3 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:16 PID hash table entries: 2048 (order: 11, 8192 bytes) Fast TSC calibration using PIT Detected 2805.953 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 513004k/522176k available (2552k kernel code, 8548k reserved, 819k data, 244k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffeb000 - 0xfffff000 ( 80 kB) vmalloc : 0xe05f0000 - 0xfffe9000 ( 505 MB) lowmem : 0xc0000000 - 0xdfdf0000 ( 509 MB) .init : 0xc044e000 - 0xc048b000 ( 244 kB) .data : 0xc037e1a3 - 0xc044b088 ( 819 kB) .text : 0xc0100000 - 0xc037e1a3 (2552 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 5611.90 BogoMIPS (lpj=2805953) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ACPI: setting ELCR to 0200 (from 0e00) net_namespace: 544 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd996, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x15, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff] pci 0000:00:02.0: Enabling SiS 96x SMBus pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f] pci 0000:00:02.5: reg 20 io port: [0x1000-0x100f] pci 0000:00:02.6: reg 10 io port: [0x1800-0x18ff] pci 0000:00:02.6: reg 14 io port: [0x1400-0x147f] pci 0000:00:02.6: supports D1 D2 pci 0000:00:02.6: PME# supported from D3hot D3cold pci 0000:00:02.6: PME# disabled pci 0000:00:02.7: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:02.7: reg 14 io port: [0x1480-0x14ff] pci 0000:00:02.7: supports D1 D2 pci 0000:00:02.7: PME# supported from D3hot D3cold pci 0000:00:02.7: PME# disabled pci 0000:00:03.0: reg 10 32bit mmio: [0xd4000000-0xd4000fff] pci 0000:00:03.1: reg 10 32bit mmio: [0xd4001000-0xd4001fff] pci 0000:00:03.2: reg 10 32bit mmio: [0xd4002000-0xd4002fff] pci 0000:00:03.3: reg 10 32bit mmio: [0xd4003000-0xd4003fff] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold pci 0000:00:03.3: PME# disabled pci 0000:00:04.0: reg 10 io port: [0x2000-0x20ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xd4004000-0xd4004fff] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0a.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:0a.1: supports D1 D2 pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0a.2: reg 10 32bit mmio: [0xd4005000-0xd40057ff] pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold pci 0000:00:0a.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd5000000-0xd5ffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xd5000000-0xd5ffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:04: ioport range 0x8000-0x808f has been reserved system 00:04: ioport range 0x8090-0x80ff has been reserved system 00:04: ioport range 0x8100-0x811f has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0x600-0x60f has been reserved system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved system 00:04: iomem range 0xffe80000-0xffefffff has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xd5000000-0xd5ffffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0x002400-0x0024ff pci 0000:00:0a.0: IO window: 0x002800-0x0028ff pci 0000:00:0a.0: PREFETCH window: 0x30000000-0x33ffffff pci 0000:00:0a.0: MEM window: 0x34000000-0x37ffffff pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06 pci 0000:00:0a.1: IO window: 0x002c00-0x002cff pci 0000:00:0a.1: IO window: 0x003000-0x0030ff pci 0000:00:0a.1: PREFETCH window: 0x38000000-0x3bffffff pci 0000:00:0a.1: MEM window: 0x3c000000-0x3fffffff pci 0000:00:0a.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:0a.1: enabling device (0000 -> 0003) pci 0000:00:0a.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xd5000000-0xd5ffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:02: resource 0 io: [0x2400-0x24ff] pci_bus 0000:02: resource 1 io: [0x2800-0x28ff] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x33ffffff] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff] pci_bus 0000:06: resource 0 io: [0x2c00-0x2cff] pci_bus 0000:06: resource 1 io: [0x3000-0x30ff] pci_bus 0000:06: resource 2 pref mem [0x38000000-0x3bffffff] pci_bus 0000:06: resource 3 mem: [0x3c000000-0x3fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. JFS: nTxBlock = 4009, nTxLock = 32073 SGI XFS with security attributes, no debug enabled msgmni has been set to 1002 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device Real Time Clock Driver v1.12b Linux agpgart interface v0.103 ACPI: AC Adapter [ACAD] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C2]) processor ACPI_CPU:00: registered as cooling_device0 Switched to high resolution mode on CPU 0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [ATF0] (71 C) loop: module loaded Uniform Multi-Platform E-IDE driver sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x00) sis5513 0000:00:02.5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007 ide1: BM-DMA at 0x1008-0x100f Probing IDE interface ide0... ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) hda: IC25N060ATMR04-0, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: SONY DVD RW DW-U50A, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 512KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 ide-cd driver 5.00 ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache Uniform CD-ROM driver Revision: 3.20 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input3 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4 XFS mounting filesystem hda3 Ending clean XFS mount for filesystem: hda3 VFS: Mounted root (xfs filesystem) readonly on device 3:3. Freeing unused kernel memory: 244k freed Write protecting the kernel text: 2556k Write protecting the kernel read-only data: 696k udev: starting version 141 agpgart-sis 0000:00:00.0: SiS chipset [1039/0648] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] sis900.c: v1.08.10 Apr. 2 2006 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 11, 08:00:46:aa:97:85 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 9, io mem 0xd4000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-gentoo-r4 ohci_hcd usb usb1: SerialNumber: 0000:00:03.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 11, io mem 0xd4001000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-gentoo-r4 ohci_hcd usb usb2: SerialNumber: 0000:00:03.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:03.2: enabling device (0010 -> 0012) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.2: irq 10, io mem 0xd4002000 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-gentoo-r4 ohci_hcd usb usb3: SerialNumber: 0000:00:03.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:03.3: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:03.3: cache line size of 128 is not supported ehci_hcd 0000:00:03.3: irq 10, io mem 0xd4003000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-gentoo-r4 ehci_hcd usb usb4: SerialNumber: 0000:00:03.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected yenta_cardbus 0000:00:0a.0: CardBus bridge found [104d:814e] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0038, PCI irq 11 yenta_cardbus 0000:00:0a.0: Socket status: 30000820 yenta_cardbus 0000:00:0a.1: CardBus bridge found [104d:814e] yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0038, PCI irq 11 yenta_cardbus 0000:00:0a.1: Socket status: 30000006 Intel ICH Modem 0000:00:02.6: enabling device (0000 -> 0001) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 Intel ICH Modem 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 MC'97 1 converters and GPIO not ready (0xff00) Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 usb 3-2: new full speed USB device using ohci_hcd and address 2 usb 3-2: New USB device found, idVendor=054c, idProduct=0069 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Memory Stick Slot usb 3-2: Manufacturer: Sony usb 3-2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 pci 0000:02:00.0: reg 10 32bit mmio: [0xffffe000-0xffffffff] cfg80211: Calling CRDA to update world regulatory domain rt2500pci 0000:02:00.0: enabling device (0000 -> 0002) rt2500pci 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 rt2500pci 0000:02:00.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50504 usecs (2430 samples) intel8x0: clocking to 48000 phy0: Selected rate control algorithm 'minstrel' kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 524280k swap on /mnt/u/var/swap. Priority:-1 extents:2303 across:1095292k scsi 0:0:0:0: Direct-Access Sony MSC-U03 2.00 PQ: 0 ANSI: 0 CCS usb-storage: device scan complete Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 Adding 524280k swap on /mnt/u/var/swap2. Priority:-2 extents:1009 across:1898268k eth0: Media Link Off hdc: UDMA/33 mode selected wlan0: authenticate with AP 00:14:bf:a2:63:f9 wlan0: authenticated wlan0: associate with AP 00:14:bf:a2:63:f9 wlan0: RX AssocResp from 00:14:bf:a2:63:f9 (capab=0x411 status=0 aid=6) wlan0: associated [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 nouveau 0000:01:00.0: Detected an NV30 generation card (0x031a00a1) nouveau 0000:01:00.0: Attempting to load BIOS image from PROM nouveau 0000:01:00.0: ... BIOS signature not found nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN nouveau 0000:01:00.0: ... BIOS checksum invalid nouveau 0000:01:00.0: Attempting to load BIOS image from PCI ROM nouveau 0000:01:00.0: ... appears to be valid nouveau 0000:01:00.0: BMP BIOS found nouveau 0000:01:00.0: BMP version 5.39 nouveau 0000:01:00.0: Bios version 04.31.20.37 nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000005 nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00009c40 nouveau 0000:01:00.0: Raw DCB entry 2: 02010321 00000703 nouveau 0000:01:00.0: Loading NV17 power sequencing microcode nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE4A0 nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE7F2 nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE955 nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAC5 nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAE2 nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xEAFF nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xECEB nouveau 0000:01:00.0: No pointer to output script table nouveau 0000:01:00.0: No pointer to output script table nouveau 0000:01:00.0: No pointer to output script table [TTM] TTM available graphics memory: 250 MiB [TTM] TTM available object memory: 250 MiB agpgart-sis 0000:00:00.0: AGP 3.0 bridge agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode nouveau 0000:01:00.0: Allocating FIFO number 0 nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 0 nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 nouveau 0000:01:00.0: Detected a LVDS connector nouveau 0000:01:00.0: Detected a VGA connector nouveau 0000:01:00.0: Saving VGA fonts nouveau 0000:01:00.0: LVDS but no encoder! [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 BUG: unable to handle kernel NULL pointer dereference at 0000024c IP: [] nv04_display_create+0x3d33/0x3df3 [nouveau] *pde = 00000000 Oops: 0000 [#1] last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0b/PNP0C09:00/PNP0C0A:00/power_supply/BAT1/energy_full Modules linked in: nouveau(-) ttm drm backlight i2c_algo_bit cfbcopyarea i2c_core cfbimgblt cfbfillrect snd_pcm_oss snd_mixer_oss sg sd_mod arc4 ecb cryptomgr aead pcompress crypto_blkcipher crypto_hash crypto_algapi rt2500pci rt2x00pci rt2x00lib input_polldev mac80211 cfg80211 eeprom_93cx6 usb_storage snd_intel8x0 snd_intel8x0m snd_ac97_codec ac97_bus snd_pcm yenta_socket ehci_hcd snd_timer rsrc_nonstatic pcmcia_core joydev snd ohci_hcd usbcore sis900 parport_pc snd_page_alloc sis_agp parport Pid: 5376, comm: rmmod Not tainted (2.6.30-gentoo-r4 #9) PCG-GRT815E(DE) EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at nv04_display_create+0x3d33/0x3df3 [nouveau] EAX: 00000000 EBX: dd347dc0 ECX: dd095dd8 EDX: dd3906e4 ESI: dd095e90 EDI: dd095c00 EBP: dd380000 ESP: dd1b9e64 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process rmmod (pid: 5376, ti=dd1b8000 task=df8c7870 task.ti=dd1b8000) Stack: 00000000 e08fb7bf 00000001 00000005 00000001 dd095e3c 00000000 dcc10cdc 00000000 dd347dc0 dd095e90 dd095c00 e0e850c0 e0e6ea8f dd095c00 dd095c00 df873c00 e08fc2fd 00000001 e0909df3 e09094a8 dd095c00 dd380000 e0e8521c Call Trace: [] ? drm_drawable_free_all+0x1f/0x39 [drm] [] ? nv04_display_destroy+0xb6/0x371 [nouveau] [] ? drm_lastclose+0x26a/0x2ad [drm] [] ? nouveau_unload+0x26/0x6f [nouveau] [] ? drm_put_dev+0x6c/0x3fa [drm] [] ? pci_device_remove+0x16/0x36 [] ? __device_release_driver+0x4e/0x79 [] ? driver_detach+0x6c/0x71 [] ? bus_remove_driver+0x70/0x98 [] ? pci_unregister_driver+0x27/0x61 [] ? drm_exit+0x72/0x74 [drm] [] ? sys_delete_module+0x117/0x1d9 [] ? do_page_fault+0x111/0x247 [] ? sysenter_do_call+0x12/0x26 Code: 9f 00 00 00 03 70 14 89 f2 8b 44 24 1c e8 41 20 40 df 8b 43 2c 0f b6 40 04 3c 03 0f 85 33 ff ff ff 89 d8 e8 16 7f ff ff 8b 53 2c <8b> 80 4c 02 00 00 8b 40 3c 89 44 24 04 c7 04 24 05 00 00 00 8b EIP: [] nv04_display_create+0x3d33/0x3df3 [nouveau] SS:ESP 0068:dd1b9e64 CR2: 000000000000024c ---[ end trace 7e47d60d769babc0 ]---