Linux version 2.6.11-gentoo-r6 (root@jonojono) (gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) #3 SMP Mon Jul 11 15:55:02 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f686c00 (usable) BIOS-e820: 000000003f686c00 - 000000003f688c00 (ACPI NVS) BIOS-e820: 000000003f688c00 - 000000003f68ac00 (ACPI data) BIOS-e820: 000000003f68ac00 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000fec00 ACPI: RSDT (v001 DELL SX280 0x00000007 ASL 0x00000061) @ 0x000fcbfe ACPI: FADT (v001 DELL SX280 0x00000007 ASL 0x00000061) @ 0x000fcc3e ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd407c ACPI: MADT (v001 DELL SX280 0x00000007 ASL 0x00000061) @ 0x000fccb2 ACPI: BOOT (v001 DELL SX280 0x00000007 ASL 0x00000061) @ 0x000fcd24 ACPI: ASF! (v016 DELL SX280 0x00000007 ASL 0x00000061) @ 0x000fcd4c ACPI: MCFG (v001 DELL SX280 0x00000007 ASL 0x00000061) @ 0x000fcdb3 ACPI: HPET (v001 DELL SX280 0x00000007 ASL 0x00000061) @ 0x000fcdf1 ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Built 1 zonelists Kernel command line: root=/dev/sda3 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 CPU 0 irqstacks, hard=c058f000 soft=c058d000 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 904004k/917504k available (3230k kernel code, 12992k reserved, 1197k data, 208k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 0ns tick, 3 64-bit timers Using HPET for base-timer Using HPET for gettimeofday Detected 3192.579 MHz processor. Using hpet for high-res timesource Calibrating delay loop... 6324.22 BogoMIPS (lpj=3162112) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00100000 00000000 00000080 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 per-CPU timeslice cutoff: 2925.53 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0590000 soft=c058e000 Initializing CPU#1 Calibrating delay loop... 6373.37 BogoMIPS (lpj=3186688) CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00100000 00000000 00000080 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 Total of 2 processors activated (12697.60 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 domain 1: span 3 groups: 3 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 domain 1: span 3 groups: 3 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb285, last bus=3 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:00: ioport range 0x800-0x85f could not be reserved pnp: 00:00: ioport range 0xc00-0xc7f has been reserved pnp: 00:00: ioport range 0x860-0x8ff has been reserved pnp: 00:08: ioport range 0x100-0x1fe has been reserved pnp: 00:08: ioport range 0x200-0x277 has been reserved pnp: 00:08: ioport range 0x280-0x2e7 has been reserved pnp: 00:08: ioport range 0x2e8-0x2ef has been reserved pnp: 00:08: ioport range 0x2f0-0x2f7 has been reserved pnp: 00:08: ioport range 0x2f8-0x2ff has been reserved pnp: 00:08: ioport range 0x300-0x377 has been reserved pnp: 00:08: ioport range 0x380-0x3bb has been reserved Simple Boot Flag value 0x87 read from CMOS RAM was invalid Simple Boot Flag at 0x7a set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 audit: initializing netlink socket (disabled) audit(1124102868.756:0): initialized inotify device minor=63 Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.22 [Flags: R/O]. Initializing Cryptographic API testing md5 test 1: d41d8cd98f00b204e9800998ecf8427e pass test 2: 0cc175b9c0f1b6a831c399e269772661 pass test 3: 900150983cd24fb0d6963f7d28e17f72 pass test 4: f96b697d7cb7938d525a2f31aaf161d0 pass test 5: c3fcd3d76192e4007dfb496cca67e13b pass test 6: d174ab98d277d9f5a5611c2c9f419d9f pass test 7: 57edf4a22be3c955ac49da2e2107b67a pass testing md5 across pages test 1: c3fcd3d76192e4007dfb496cca67e13b pass testing sha1 test 1: a9993e364706816aba3e25717850c26c9cd0d89d pass test 2: 84983e441c3bd26ebaae4aa1f95129e5e54670f1 pass testing sha1 across pages test 1: 84983e441c3bd26ebaae4aa1f95129e5e54670f1 pass testing des ECB encryption test 1 (64 bit key): c95744256a5ed31d pass test 2 (64 bit key): f79c892a338f4a8b pass test 3 (64 bit key): 690f5b0d9a26939b pass test 4 (64 bit key): c95744256a5ed31df79c892a338f4a8bb49926f71fe1d490 pass test 5 (64 bit key): setkey() failed flags=100100 c95744256a5ed31d pass testing des ECB encryption across pages (chunking) test 1 (64 bit key): page 0 c95744256a5ed31d pass page 1 f79c892a338f4a8b pass test 2 (64 bit key): page 0 c95744256a5ed31df79c892a338f pass page 1 4a8bb49926f71fe1d490 pass page 2 f79c892a338f4a8b pass test 3 (64 bit key): page 0 c957 pass page 1 44 pass page 2 256a5e pass page 3 d31df79c892a338f4a8bb49926f71fe1d490 pass test 4 (64 bit key): page 0 c957 pass page 1 4425 pass page 2 6a5e pass page 3 d31d pass page 4 f79c892a338f4a8b pass test 5 (64 bit key): page 0 c9 pass page 1 57 pass page 2 44 pass page 3 25 pass page 4 6a pass page 5 5e pass page 6 d3 pass page 7 1d pass testing des ECB decryption test 1 (64 bit key): 0123456789abcde7 pass test 2 (64 bit key): 01a1d6d039776742 pass testing des ECB decryption across pages (chunking) test 1 (64 bit key): page 0 0123456789abcde7 pass page 1 a3997bcaaf69a0f5 pass test 2 (64 bit key): page 0 012345 pass page 1 6789abcde7a3997bcaaf69a0 pass page 2 f5 pass testing des CBC encryption test 1 (64 bit key): ccd173ffab2039f4acd8aefddfd8a1eb468e91157888ba68 pass test 2 (64 bit key): e5c7cdde872bf27c pass test 3 (64 bit key): 43e934008c389c0f pass test 4 (64 bit key): 683788499a7c05f6 pass testing des CBC encryption across pages (chunking) test 1 (64 bit key): page 0 ccd173ffab2039f4acd8aefddf pass page 1 d8a1eb468e91157888ba68 pass testing des CBC decryption test 1 (64 bit key): 4e6f772069732074 pass test 2 (64 bit key): 68652074696d6520 pass test 3 (64 bit key): 666f7220616c6c20 pass testing des CBC decryption across pages (chunking) test 1 (64 bit key): page 0 666f7220 pass page 1 616c6c20 pass testing des3_ede ECB encryption test 1 (192 bit key): 18d748e563620572 pass test 2 (192 bit key): c07d2a0fa566fa30 pass test 3 (192 bit key): e1ef62c332fe825b pass testing des3_ede ECB encryption across pages (chunking) testing des3_ede ECB decryption test 1 (192 bit key): 736f6d6564617461 pass test 2 (192 bit key): 7371756967676c65 pass test 3 (192 bit key): 0000000000000000 pass testing des3_ede ECB decryption across pages (chunking) testing md4 failed to load transform for md4 testing sha256 failed to load transform for sha256 testing blowfish ECB encryption test 1 (64 bit key): 4ef997456198dd78 pass test 2 (64 bit key): a790795108ea3cae pass test 3 (64 bit key): e87a244e2cc85e82 pass test 4 (128 bit key): 93142887ee3be15c pass test 5 (168 bit key): e6f51ed79b9db21f pass test 6 (448 bit key): c04504012e4e1f53 pass testing blowfish ECB encryption across pages (chunking) testing blowfish ECB decryption test 1 (64 bit key): 0000000000000000 pass test 2 (64 bit key): 0123456789abcdef pass test 3 (64 bit key): fedcba9876543210 pass test 4 (128 bit key): fedcba9876543210 pass test 5 (168 bit key): fedcba9876543210 pass test 6 (448 bit key): fedcba9876543210 pass testing blowfish ECB decryption across pages (chunking) testing blowfish CBC encryption test 1 (128 bit key): 6b77b4d63006dee605b156e27403979358deb9e7154616d959f1652bd5ff92cc pass testing blowfish CBC encryption across pages (chunking) testing blowfish CBC decryption test 1 (128 bit key): 37363534333231204e6f77206973207468652074696d6520666f722000000000 pass testing blowfish CBC decryption across pages (chunking) testing twofish ECB encryption failed to load transform for twofish ECB testing twofish ECB decryption failed to load transform for twofish ECB testing twofish CBC encryption failed to load transform for twofish CBC testing twofish CBC decryption failed to load transform for twofish CBC testing serpent ECB encryption failed to load transform for serpent ECB testing serpent ECB decryption failed to load transform for serpent ECB testing tnepres ECB encryption failed to load transform for tnepres ECB testing tnepres ECB decryption failed to load transform for tnepres ECB testing aes ECB encryption test 1 (128 bit key): 69c4e0d86a7b0430d8cdb78070b4c55a pass test 2 (192 bit key): dda97ca4864cdfe06eaf70a0ec0d7191 pass test 3 (256 bit key): 8ea2b7ca516745bfeafc49904b496089 pass testing aes ECB encryption across pages (chunking) testing aes ECB decryption test 1 (128 bit key): 00112233445566778899aabbccddeeff pass test 2 (192 bit key): 00112233445566778899aabbccddeeff pass test 3 (256 bit key): 00112233445566778899aabbccddeeff pass testing aes ECB decryption across pages (chunking) testing cast5 ECB encryption failed to load transform for cast5 ECB testing cast5 ECB decryption failed to load transform for cast5 ECB testing cast6 ECB encryption failed to load transform for cast6 ECB testing cast6 ECB decryption failed to load transform for cast6 ECB testing arc4 ECB encryption test 1 (64 bit key): 75b7878099e0c596 pass test 2 (64 bit key): 7494c2e7104b0879 pass test 3 (64 bit key): de188941a3375d3a pass test 4 (32 bit key): d6a141a7ec3c38dfbd615a1162e1c7ba36b67858 pass test 5 (64 bit key): 66a0949f8af7d6891f7f832ba833c00c892ebe30143ce28740011ecf pass test 6 (32 bit key): d6a141a7ec3c38dfbd61 pass test 7 (128 bit key): 697236591b5242b1 pass testing arc4 ECB encryption across pages (chunking) testing arc4 ECB decryption test 1 (64 bit key): 0123456789abcdef pass test 2 (64 bit key): 0000000000000000 pass test 3 (64 bit key): 0000000000000000 pass test 4 (32 bit key): 0000000000000000000000000000000000000000 pass test 5 (64 bit key): 123456789abcdef0123456789abcdef0123456789abcdef012345678 pass test 6 (32 bit key): 00000000000000000000 pass test 7 (128 bit key): 0123456789abcdef pass testing arc4 ECB decryption across pages (chunking) testing tea ECB encryption failed to load transform for tea ECB testing tea ECB decryption failed to load transform for tea ECB testing xtea ECB encryption failed to load transform for xtea ECB testing xtea ECB decryption failed to load transform for xtea ECB testing khazad ECB encryption failed to load transform for khazad ECB testing khazad ECB decryption failed to load transform for khazad ECB testing anubis ECB encryption failed to load transform for anubis ECB testing anubis ECB decryption failed to load transform for anubis ECB testing anubis CBC encryption failed to load transform for anubis CBC testing anubis CBC decryption failed to load transform for anubis CBC testing sha384 failed to load transform for sha384 testing sha512 failed to load transform for sha512 testing wp512 failed to load transform for wp512 testing wp384 failed to load transform for wp384 testing wp256 failed to load transform for wp256 testing deflate compression test 1: f3cacfcc53282d56c8cb2f5748cc4b5128ce482c4a5528c9485528ce4f2b290771bc082b0100 pass (ratio 70:38) test 2: 5d8d310ec2301004bfb22fc81f10040989c2853f70b12ff824db67d947c1ef49681251ae7667d62719881ade85ab21f2085d161e20042dadf318a215852d69c4428323b66c89719befcf8b9fcf33ca2fed62a94c80ff13af5237ed0e526b5902d94ee87a761d0298fe8a8783a34f568ab89e8e5c57d3a079fa02 pass (ratio 191:122) testing deflate decompression test 1: 5468697320646f63756d656e7420646573637269626573206120636f6d7072657373696f6e206d6574686f64206261736564206f6e20746865204445464c415445636f6d7072657373696f6e20616c676f726974686d2e20205468697320646f63756d656e7420646566696e657320746865206170706c69636174696f6e206f6620746865204445464c41544520616c676f726974686d20746f20746865204950205061796c6f616420436f6d7072657373696f6e2050726f746f636f6c2e pass (ratio 122:191) test 2: 4a6f696e207573206e6f7720616e642073686172652074686520736f667477617265204a6f696e207573206e6f7720616e642073686172652074686520736f66747761726520 pass (ratio 38:70) testing crc32c testing crc32c initialized to 00000000: pass testing crc32c setkey returns 12345678 : pass testing crc32c using update/final: 0e2c157f:OK e980ebf6:OK de74bded:OK d579c862:OK ba979ad0:OK 2b29d913:OK testing crc32c using incremental accumulator: 24c5d375:OK testing crc32c using digest: 24c5d375:OK pass crc32c test complete testing hmac_md5 test 1: 9294727a3638bb1c13f48ef8158bfc9d pass test 2: 750c783e6ab0b503eaa86e310a5db738 pass test 3: 56be34521d144c88dbb8c733f0e8b3f6 pass test 4: 697eaf0aca3a3aea3a75164746ffaa79 pass test 5: 56461ef2342edc00f9bab995690efd4c pass test 6: 6b1ab7fe4bd7bf8f0b62e6ce61b9d0cd pass test 7: 6f630fad67cda0ee1fb1f562db3aa53e pass testing hmac_md5 across pages test 1: 750c783e6ab0b503eaa86e310a5db738 pass testing hmac_sha1 test 1: b617318655057264e28bc0b6fb378c8ef146be00 pass test 2: effcdf6ae5eb2fa2d27416d5f184df9c259a7c79 pass test 3: 125d7342b9ac11cd91a39af48aa17b4f63f175d3 pass test 4: 4c9007f4026250c6bc8414f9bf50c86c2d7235da pass test 5: 4c1a03424b55e07fe7f27be1d58bb9324a9a5a04 pass test 6: aa4ae5e15272d00e95705637ce8a3b55ed402112 pass test 7: e8e99d0f45237d786d6bbaa7965c7808bbff1a91 pass testing hmac_sha1 across pages test 1: effcdf6ae5eb2fa2d27416d5f184df9c259a7c79 pass failed to load transform for sha256 testing michael_mic failed to load transform for michael_mic ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] Real Time Clock Driver v1.12 hpet_acpi_add: no address or irqs in _CRS Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 915G Chipset. agpgart: Maximum main memory to use for agp memory: 816M agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [drm] Initialized i915 1.1.0 20040405 on minor 0: Intel Corp. 82915G Express Chipset Family Graphics Controller ACPI: Power Button (FF) [PWRF] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A mice: PS/2 mouse device common for all mice input: PS/2 Generic Mouse on isa0060/serio1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com tg3.c:v3.23 (February 15, 2005) ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:43:aa:5b:96 eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: PHILIPS CD-RW/DVD-ROM CDD5263, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.10 loaded. ata_piix version 1.03 ACPI: PCI interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 201 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 201 ata1: dev 0 cfg 49:2f00 82:3469 83:7f61 84:4003 85:3469 86:3e41 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 312500000 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ATA: abnormal status 0xFF on port 0xFE27 ata2: disabling port scsi1 : ata_piix Vendor: ATA Model: WDC WD1600JD-75H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) SCSI device sda: drive cache: write back SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 209 ehci_hcd 0000:00:1d.7: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 209, pci mem 0xffa80800 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 209 uhci_hcd 0000:00:1d.0: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 209, io base 0xff80 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 217 uhci_hcd 0000:00:1d.1: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 217, io base 0xff60 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225 uhci_hcd 0000:00:1d.2: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 usb 1-2: new high speed USB device using ehci_hcd and address 2 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 225, io base 0xff40 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 233 uhci_hcd 0000:00:1d.3: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 233, io base 0xff20 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb 3-2: new low speed USB device using uhci_hcd and address 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. usb 1-2.1: new low speed USB device using ehci_hcd and address 4 input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2 input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.7-2.1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). ACPI: PCI interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1e.2 to 64 intel8x0_measure_ac97_clock: measured 50225 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel ICH with AD1981B at 0xdfebfe00, irq 233 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) ip_conntrack version 2.1 (7168 buckets, 57344 max) - 220 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq ACPI wakeup devices: VBTN PCI0 PCI1 PCI2 PCI3 PCI4 USB0 USB1 USB2 USB3 ACPI: (supports S0 S1 S3 S4 S5) ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: replayed 3 transactions in 0 seconds ReiserFS: sda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 208k freed Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. mtrr: base(0xc0020000) is not aligned on a size(0x800000) boundary