[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009d800 [ 0.000000] Linux version 2.6.28-gentoo-r5 (root@daedalus) (gcc version 4.1.2 (Gentoo 4.1.2)) #5 PREEMPT Fri Aug 14 21:55:41 EEST 2009 [ 0.000000] Command line: root=/dev/sda5 fbcon=scrollback:256k [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-000000003ffb0000 [ 0.000000] 0000000000 - 003fe00000 page 2M [ 0.000000] 003fe00000 - 003ffb0000 page 4k [ 0.000000] kernel direct mapping tables up to 3ffb0000 @ 10000-13000 [ 0.000000] last_map_addr: 3ffb0000 end: 3ffb0000 [ 0.000000] ACPI: RSDP 000FA7C0, 0021 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 3FFB0100, 003C (r1 A M I OEMXSDT 11000514 MSFT 97) [ 0.000000] ACPI: FACP 3FFB0290, 00F4 (r3 A M I OEMFACP 11000514 MSFT 97) [ 0.000000] ACPI: DSDT 3FFB03F0, 3A3E (r1 A0036 A0036001 1 MSFT 100000D) [ 0.000000] ACPI: FACS 3FFC0000, 0040 [ 0.000000] ACPI: APIC 3FFB0390, 0052 (r1 A M I OEMAPIC 11000514 MSFT 97) [ 0.000000] ACPI: OEMB 3FFC0040, 003F (r1 A M I OEMBIOS 11000514 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003ffb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 000074cd8c] TEXT DATA BSS ==> [0000200000 - 000074cd8c] [ 0.000000] #3 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffb0 [ 0.000000] On node 0 totalpages: 261951 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1458 pages reserved [ 0.000000] DMA zone: 2469 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254441 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256910 [ 0.000000] Kernel command line: root=/dev/sda5 fbcon=scrollback:256k [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 1802.312 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000999] Checking aperture... [ 0.000999] AGP bridge at 00:00:00 [ 0.000999] Aperture from AGP @ e8000000 old size 32 MB [ 0.000999] Aperture from AGP @ e8000000 size 64 MB (APSIZE f30) [ 0.000999] Node 0: aperture @ e8000000 size 64 MB [ 0.000999] Memory: 1025772k/1048256k available (2867k kernel code, 452k absent, 21408k reserved, 1611k data, 292k init) [ 0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3604.62 BogoMIPS (lpj=1802312) [ 0.001162] Security Framework initialized [ 0.001239] Mount-cache hash table entries: 256 [ 0.001442] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.001503] CPU: L2 Cache: 512K (64 bytes/line) [ 0.001561] tseg: 0000000000 [ 0.001579] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02 [ 0.001737] ACPI: Core revision 20080926 [ 0.007664] Setting APIC routing to flat [ 0.007998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.017997] net_namespace: 1264 bytes [ 0.017997] NET: Registered protocol family 16 [ 0.017997] node 0 link 0: io port [1000, ffffff] [ 0.017997] TOM: 0000000040000000 aka 1024M [ 0.017997] node 0 link 0: mmio [a0000, bffff] [ 0.017997] node 0 link 0: mmio [40000000, ffffffff] [ 0.017997] bus: [00,ff] on node 0 link 0 [ 0.017997] bus: 00 index 0 io port: [0, ffff] [ 0.017997] bus: 00 index 1 mmio: [a0000, bffff] [ 0.017997] bus: 00 index 2 mmio: [40000000, fcffffffff] [ 0.017997] ACPI: bus type pci registered [ 0.017997] PCI: Using configuration type 1 for base access [ 0.019931] ACPI: EC: Look up EC in DSDT [ 0.027350] ACPI: Interpreter enabled [ 0.027411] ACPI: (supports S0 S1 S3 S5) [ 0.027653] ACPI: Using IOAPIC for interrupt routing [ 0.036736] ACPI: No dock devices found. [ 0.036805] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.036943] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff] [ 0.037181] pci 0000:00:01.0: supports D1 [ 0.037214] pci 0000:00:07.0: reg 10 32bit mmio: [0xfaa00000-0xfaa007ff] [ 0.037220] pci 0000:00:07.0: reg 14 io port: [0xa000-0xa07f] [ 0.037247] pci 0000:00:07.0: supports D2 [ 0.037249] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold [ 0.037311] pci 0000:00:07.0: PME# disabled [ 0.037388] pci 0000:00:09.0: reg 10 32bit mmio: [0xeff00000-0xeff00fff] [ 0.037444] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfac00000-0xfac03fff] [ 0.037450] pci 0000:00:0a.0: reg 14 io port: [0xa400-0xa4ff] [ 0.037470] pci 0000:00:0a.0: reg 30 32bit mmio: [0xfab00000-0xfab1ffff] [ 0.037479] pci 0000:00:0a.0: supports D1 D2 [ 0.037482] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.037543] pci 0000:00:0a.0: PME# disabled [ 0.037621] pci 0000:00:0d.0: reg 10 io port: [0xa800-0xa81f] [ 0.037663] pci 0000:00:0e.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff] [ 0.037670] pci 0000:00:0e.0: reg 14 io port: [0xb000-0xb0ff] [ 0.037690] pci 0000:00:0e.0: reg 30 32bit mmio: [0xf8000000-0xf8ffffff] [ 0.037720] pci 0000:00:0f.0: reg 10 io port: [0xd000-0xd007] [ 0.037726] pci 0000:00:0f.0: reg 14 io port: [0xc800-0xc803] [ 0.037733] pci 0000:00:0f.0: reg 18 io port: [0xc400-0xc407] [ 0.037739] pci 0000:00:0f.0: reg 1c io port: [0xc000-0xc003] [ 0.037745] pci 0000:00:0f.0: reg 20 io port: [0xb800-0xb80f] [ 0.037751] pci 0000:00:0f.0: reg 24 io port: [0xb400-0xb4ff] [ 0.037804] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.037868] pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f] [ 0.037883] pci 0000:00:10.0: supports D1 D2 [ 0.037886] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.037947] pci 0000:00:10.0: PME# disabled [ 0.038036] pci 0000:00:10.1: reg 20 io port: [0xd800-0xd81f] [ 0.038052] pci 0000:00:10.1: supports D1 D2 [ 0.038054] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.038116] pci 0000:00:10.1: PME# disabled [ 0.038213] pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f] [ 0.038229] pci 0000:00:10.2: supports D1 D2 [ 0.038231] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.038293] pci 0000:00:10.2: PME# disabled [ 0.038390] pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f] [ 0.038405] pci 0000:00:10.3: supports D1 D2 [ 0.038408] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.038469] pci 0000:00:10.3: PME# disabled [ 0.038552] pci 0000:00:10.4: reg 10 32bit mmio: [0xfae00000-0xfae000ff] [ 0.038583] pci 0000:00:10.4: supports D1 D2 [ 0.038585] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.038646] pci 0000:00:10.4: PME# disabled [ 0.038756] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.038819] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.038914] pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff] [ 0.038944] pci 0000:00:11.5: supports D1 D2 [ 0.038973] pci 0000:00:11.6: reg 10 io port: [0x00-0xff] [ 0.039113] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.039118] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.039131] pci 0000:01:00.0: reg 30 32bit mmio: [0xfaf00000-0xfaf1ffff] [ 0.039162] pci 0000:00:01.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.039166] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.039173] bus 00 -> node 0 [ 0.039181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.049757] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.050330] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15) [ 0.050925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 0.051547] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15) [ 0.052155] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.052844] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.053507] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.054207] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.054928] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F8, should be C8 [20080926] [ 0.055289] SCSI subsystem initialized [ 0.055373] libata version 3.00 loaded. [ 0.055469] usbcore: registered new interface driver usbfs [ 0.055562] usbcore: registered new interface driver hub [ 0.055660] usbcore: registered new device driver usb [ 0.055848] PCI: Using ACPI for IRQ routing [ 0.055912] pci 0000:00:00.0: BAR 0: can't allocate resource [ 0.060050] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] [ 0.062391] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 [ 0.065006] pnp: PnP ACPI init [ 0.065069] ACPI: bus type pnp registered [ 0.067572] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.067645] pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.067717] pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.067789] pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.067861] pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.067932] pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.068013] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.068085] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.068157] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.068228] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.068300] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.068372] pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.068444] pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.071217] pnp 00:0f: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.071291] pnp 00:0f: mem resource (0xc0000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.071364] pnp 00:0f: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.071437] pnp 00:0f: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.071886] pnp: PnP ACPI: found 16 devices [ 0.071946] ACPI: ACPI bus type pnp unregistered [ 0.072021] system 00:08: ioport range 0x680-0x6ff has been reserved [ 0.072081] system 00:08: ioport range 0x290-0x297 has been reserved [ 0.072145] system 00:09: ioport range 0x3e1-0x3e7 has been reserved [ 0.072205] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.072265] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.072325] system 00:09: ioport range 0x400-0x41f has been reserved [ 0.072389] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.072450] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.072511] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved [ 0.077240] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.077299] pci 0000:00:01.0: IO window: disabled [ 0.077359] pci 0000:00:01.0: MEM window: 0xfaf00000-0xfbffffff [ 0.077420] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.077500] pci 0000:00:01.0: setting latency timer to 64 [ 0.077504] bus: 00 index 0 io port: [0x00-0xffff] [ 0.077562] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.077621] bus: 01 index 0 mmio: [0x0-0x0] [ 0.077679] bus: 01 index 1 mmio: [0xfaf00000-0xfbffffff] [ 0.080272] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff] [ 0.080330] bus: 01 index 3 mmio: [0x0-0x0] [ 0.080413] NET: Registered protocol family 2 [ 0.090021] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.090389] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.092193] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.092723] TCP: Hash tables configured (established 131072 bind 65536) [ 0.092784] TCP reno registered [ 0.095052] NET: Registered protocol family 1 [ 0.096022] msgmni has been set to 2004 [ 0.096106] alg: No test for stdrng (krng) [ 0.096171] io scheduler noop registered [ 0.096228] io scheduler anticipatory registered [ 0.096286] io scheduler deadline registered [ 0.096352] io scheduler cfq registered (default) [ 0.096420] PCI: VIA PCI bridge detected.Disabling DAC. [ 0.579917] Switched to high resolution mode on CPU 0 [ 5.594005] pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 5.594184] pci 0000:01:00.0: Boot video device [ 5.596611] lp: driver loaded but no devices found [ 5.596716] Real Time Clock Driver v1.12ac [ 5.596851] Linux agpgart interface v0.103 [ 5.596993] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 5.597227] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.597385] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.597794] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.598005] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.598277] parport_pc 00:07: reported by Plug and Play ACPI [ 5.598372] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 5.680052] lp0: using parport0 (interrupt-driven). [ 5.680413] Floppy drive(s): fd0 is 1.44M [ 5.695178] FDC 0 is a post-1991 82077 [ 5.698177] brd: module loaded [ 5.698848] loop: module loaded [ 5.698910] Uniform Multi-Platform E-IDE driver [ 5.699072] via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133 [ 5.699134] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06) [ 5.699211] pci 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.699309] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later [ 5.699382] ide0: BM-DMA at 0xfc00-0xfc07 [ 5.699447] ide1: BM-DMA at 0xfc08-0xfc0f [ 5.699508] Probing IDE interface ide0... [ 6.218048] Probing IDE interface ide1... [ 7.012095] hdc: PHILIPS CDRW1610A, ATAPI CD/DVD-ROM drive [ 7.624043] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 7.624280] hdc: UDMA/33 mode selected [ 7.624771] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 7.624891] ide1 at 0x170-0x177,0x376 on irq 15 [ 7.625147] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 7.625244] ide-gd driver 1.18 [ 7.625328] ide-cd driver 5.00 [ 7.626935] ide-cd: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache [ 7.627213] Uniform CD-ROM driver Revision: 3.20 [ 7.631496] Driver 'sd' needs updating - please use bus_type methods [ 7.631633] sata_via 0000:00:0f.0: version 2.4 [ 7.631643] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 7.631750] sata_via 0000:00:0f.0: routed to hard irq line 5 [ 7.631864] scsi0 : sata_via [ 7.632033] scsi1 : sata_via [ 7.632161] ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20 [ 7.632222] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20 [ 7.833009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.988202] ata1.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 [ 7.988262] ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 7.995213] ata1.00: configured for UDMA/133 [ 8.207008] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 8.228024] isa bounce pool size: 16 pages [ 8.228146] scsi 0:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5 [ 8.228369] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB) [ 8.228452] sd 0:0:0:0: [sda] Write Protect is off [ 8.228510] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.228531] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.228661] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB) [ 8.228741] sd 0:0:0:0: [sda] Write Protect is off [ 8.228799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.228819] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.228892] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 8.331128] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.331337] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 8.331398] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 8.331590] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.331771] mice: PS/2 mouse device common for all mice [ 8.331992] TCP cubic registered [ 8.332085] NET: Registered protocol family 10 [ 8.332290] IPv6 over IPv4 tunneling driver [ 8.332487] NET: Registered protocol family 17 [ 8.332548] NET: Registered protocol family 15 [ 8.356166] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 8.458630] EXT3-fs: mounted filesystem with ordered data mode. [ 8.458697] VFS: Mounted root (ext3 filesystem) readonly. [ 8.458769] Freeing unused kernel memory: 292k freed [ 8.458982] Write protecting the kernel read-only data: 4120k [ 8.459296] kjournald starting. Commit interval 5 seconds [ 10.552572] udev: starting version 141 [ 10.647069] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 10.651034] ACPI: Power Button (FF) [PWRF] [ 10.651162] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 10.656034] ACPI: Power Button (CM) [PWRB] [ 10.656148] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 10.660046] ACPI: Sleep Button (CM) [SLPB] [ 10.691231] processor ACPI_CPU:00: registered as cooling_device0 [ 10.997964] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.997977] skge 0000:00:0a.0: PCI: Disallowing DAC for device [ 10.998029] skge 1.13 addr 0xfac00000 irq 17 chip Yukon-Lite rev 9 [ 10.998225] skge eth0: addr 00:11:d8:b1:88:dc [ 11.024223] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 11.024260] ne2k-pci 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.024466] eth1: RealTek RTL-8029 found at 0xa800, IRQ 18, 00:00:b4:b0:e5:5d. [ 11.042468] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.274212] ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.336608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.337569] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[faa00000-faa007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 11.342673] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 11.342703] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 11.342766] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 11.342824] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfae00000 [ 11.348023] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 11.348138] usb usb1: configuration #1 chosen from 1 choice [ 11.348171] hub 1-0:1.0: USB hub found [ 11.348182] hub 1-0:1.0: 8 ports detected [ 11.527958] uhci_hcd: USB Universal Host Controller Interface driver [ 11.528019] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 11.528031] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 11.528084] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 11.528110] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400 [ 11.528219] usb usb2: configuration #1 chosen from 1 choice [ 11.528251] hub 2-0:1.0: USB hub found [ 11.528260] hub 2-0:1.0: 2 ports detected [ 11.528347] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 11.528353] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 11.528378] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 11.528398] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800 [ 11.528476] usb usb3: configuration #1 chosen from 1 choice [ 11.528505] hub 3-0:1.0: USB hub found [ 11.528512] hub 3-0:1.0: 2 ports detected [ 11.528592] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 11.528598] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 11.528623] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 11.528643] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 11.528721] usb usb4: configuration #1 chosen from 1 choice [ 11.528749] hub 4-0:1.0: USB hub found [ 11.528756] hub 4-0:1.0: 2 ports detected [ 11.528836] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 11.528843] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 11.528866] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 11.528886] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400 [ 11.528964] usb usb5: configuration #1 chosen from 1 choice [ 11.528992] hub 5-0:1.0: USB hub found [ 11.528998] hub 5-0:1.0: 2 ports detected [ 11.818428] [drm] Initialized drm 1.1.0 20060810 [ 11.830020] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 11.994801] usb 4-1: configuration #1 chosen from 1 choice [ 12.045425] usbcore: registered new interface driver hiddev [ 12.061093] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input4 [ 12.067028] generic-usb 0003:046D:C01D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1/input0 [ 12.067050] usbcore: registered new interface driver usbhid [ 12.067054] usbhid: v2.6:USB HID core driver [ 12.231269] Mantis 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.231333] irq: 16, latency: 64 [ 12.231334] memory: 0xeff00000, mmio: 0xffffc200003c0000 [ 12.231338] found a VP-2040 PCI DVB-C device on (00:09.0), [ 12.231341] Mantis Rev 1 [1822:0043], irq: 16, latency: 64 [ 12.231344] memory: 0xeff00000, mmio: 0xffffc200003c0000 [ 12.234213] MAC Address=[00:08:ca:1c:64:40] [ 12.234255] mantis_alloc_buffers (0): DMA=0x3d970000 cpu=0xffff88003d970000 size=65536 [ 12.234261] mantis_alloc_buffers (0): RISC=0x3e073000 cpu=0xffff88003e073000 size=1000 [ 12.234265] DVB: registering new adapter (Mantis dvb adapter) [ 12.604133] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800001d43ce] [ 12.739112] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 12.742626] TDA10023: i2c-addr = 0x0c, id = 0x7d [ 12.742630] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c [ 12.742633] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 12.742638] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 12.742705] mantis_ca_init (0): Registering EN50221 device [ 12.760225] mantis_ca_init (0): Registered EN50221 device [ 12.760236] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface [ 12.760341] input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input5 [ 12.867022] Mantis VP-2040 IR Receiver: unknown key: key=0x00 raw=0x00 down=1 [ 12.869265] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.873734] nouveau 0000:01:00.0: Detected an NV20 generation card (0x028200a2) [ 12.873836] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 12.967011] Mantis VP-2040 IR Receiver: unknown key: key=0x00 raw=0x00 down=0 [ 13.058413] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 13.058765] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 13.064439] nouveau 0000:01:00.0: ... appears to be valid [ 13.064860] nouveau 0000:01:00.0: BMP BIOS found [ 13.064862] nouveau 0000:01:00.0: BMP version 5.36 [ 13.064865] nouveau 0000:01:00.0: Bios version 04.28.20.23 [ 13.064869] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 13.064873] nouveau 0000:01:00.0: Raw DCB entry 0: 02000310 000088b8 [ 13.064876] nouveau 0000:01:00.0: Raw DCB entry 1: 02110302 00000010 [ 13.064879] nouveau 0000:01:00.0: Raw DCB entry 2: 01010300 000088b8 [ 13.064882] nouveau 0000:01:00.0: Raw DCB entry 3: 01120321 00000002 [ 13.065366] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC7EE [ 13.065386] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB38 [ 13.068224] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC8D6 [ 13.068262] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD0C2 [ 13.068269] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD0DE [ 13.068275] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCA19 [ 13.068285] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCAD3 [ 13.068288] nouveau 0000:01:00.0: No pointer to output script table [ 13.068291] nouveau 0000:01:00.0: No pointer to output script table [ 13.068293] nouveau 0000:01:00.0: No pointer to output script table [ 13.068296] nouveau 0000:01:00.0: No pointer to output script table [ 13.079982] [TTM] Zone kernel: Available graphics memory: 513344 kiB. [ 13.080023] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 13.080041] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. [ 13.080048] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 13.080126] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [ 13.080438] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 13.081256] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 13.081265] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 13.081322] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 2 [ 13.086018] nouveau 0000:01:00.0: No TV encoders found. [ 13.086026] nouveau 0000:01:00.0: Detected a VGA connector [ 13.086082] nouveau 0000:01:00.0: Detected a DVI-I connector [ 13.086121] nouveau 0000:01:00.0: Saving VGA fonts [ 13.246635] allocated 1280x1024 fb: 0x49000, bo ffff88003e0d9a00 [ 13.250075] Console: switching to colour frame buffer device 160x64 [ 13.250108] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 13.250113] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 13.250116] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 13.250121] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [ 13.260138] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [ 13.260148] [drm] TMDS-8: set mode 1280x1024 26 [ 13.260488] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [ 13.270495] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [ 13.270499] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [ 13.270503] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [ 13.270507] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [ 13.281721] fb0: nouveaufb frame buffer device [ 13.281723] registered panic notifier [ 13.281729] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-644-g8640d8250f779fc5b for 0000:01:00.0 on minor 0 [ 14.225615] EXT3 FS on sda5, internal journal [ 14.536269] nf_conntrack version 0.5.0 (8189 buckets, 32756 max) [ 17.680854] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [ 17.680870] ReiserFS: sda6: using ordered data mode [ 17.724092] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 17.725972] ReiserFS: sda6: checking transaction log (sda6) [ 17.786009] ReiserFS: sda6: Using r5 hash to sort names [ 17.856495] kjournald starting. Commit interval 5 seconds [ 17.856565] EXT3 FS on sda7, internal journal [ 17.856570] EXT3-fs: mounted filesystem with ordered data mode. [ 17.912450] kjournald starting. Commit interval 5 seconds [ 17.912522] EXT3 FS on sda8, internal journal [ 17.912525] EXT3-fs: mounted filesystem with ordered data mode. [ 17.964815] kjournald starting. Commit interval 5 seconds [ 17.964886] EXT3 FS on sda9, internal journal [ 17.964890] EXT3-fs: mounted filesystem with ordered data mode. [ 18.069470] Adding 4883752k swap on /dev/sda3. Priority:-1 extents:1 across:4883752k [ 36.780007] eth1: no IPv6 routers present [ 59.984247] tun: Universal TUN/TAP device driver, 1.6 [ 59.984251] tun: (C) 1999-2004 Max Krasnyansky [ 64.167860] w83627hf: Found W83627THF chip at 0x290 [ 64.167941] w83627hf w83627hf.656: Reading VID from GPIO5 [ 69.757007] sixxs: no IPv6 routers present [ 258.011396] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 258.011962] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 300.704023] Machine check events logged [ 619.454017] Machine check events logged [ 956.954018] Machine check events logged [ 1256.954018] Machine check events logged [ 1660.079010] Machine check events logged [ 2185.079010] Machine check events logged [ 2635.079011] Machine check events logged [ 2953.829011] Machine check events logged [ 3647.580012] Machine check events logged [ 3966.330011] Machine check events logged [12947.388280] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [12952.895071] SysRq : Changing Loglevel [12952.895673] Loglevel set to 9 [12966.466016] nouveau 0000:01:00.0: Allocating FIFO number 1 [12966.466589] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [12979.326883] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [12987.969769] Console: switching to colour VGA+ 80x25 [12988.004845] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [12988.014927] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [12988.015701] nouveau 0000:01:00.0: Restoring VGA fonts [12988.019632] unregistered panic notifier [12988.023076] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 0 [12988.023320] [TTM] Zone kernel: Used memory at exit: 0 kiB. [12988.024059] [drm] Module unloaded [12997.091268] [drm] Initialized drm 1.1.0 20060810 [12997.427189] nouveau 0000:01:00.0: Detected an NV20 generation card (0x028200a2) [12997.427355] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [12997.563063] nouveau 0000:01:00.0: ... appears to be valid [12997.563543] nouveau 0000:01:00.0: BMP BIOS found [12997.563601] nouveau 0000:01:00.0: BMP version 5.36 [12997.563661] nouveau 0000:01:00.0: Bios version 04.28.20.23 [12997.563721] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [12997.563791] nouveau 0000:01:00.0: Raw DCB entry 0: 02000310 000088b8 [12997.563852] nouveau 0000:01:00.0: Raw DCB entry 1: 02110302 00000010 [12997.563912] nouveau 0000:01:00.0: Raw DCB entry 2: 01010300 000088b8 [12997.563972] nouveau 0000:01:00.0: Raw DCB entry 3: 01120321 00000002 [12997.565112] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC7EE [12997.565191] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB38 [12997.567279] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC8D6 [12997.567372] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD0C2 [12997.567437] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD0DE [12997.567500] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCA19 [12997.567569] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCAD3 [12997.567630] nouveau 0000:01:00.0: No pointer to output script table [12997.567689] nouveau 0000:01:00.0: No pointer to output script table [12997.567749] nouveau 0000:01:00.0: No pointer to output script table [12997.567808] nouveau 0000:01:00.0: No pointer to output script table [12997.578868] [TTM] Zone kernel: Available graphics memory: 513344 kiB. [12997.578950] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [12997.579176] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. [12997.579242] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [12997.579377] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [12997.579711] nouveau 0000:01:00.0: Allocating FIFO number 0 [12997.580964] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [12997.581127] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [12997.581245] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 2 [12997.586455] nouveau 0000:01:00.0: No TV encoders found. [12997.586522] nouveau 0000:01:00.0: Detected a VGA connector [12997.586633] nouveau 0000:01:00.0: Detected a DVI-I connector [12997.586727] nouveau 0000:01:00.0: Saving VGA fonts [12997.757039] allocated 1280x1024 fb: 0x49000, bo ffff88003e1e2c00 [12997.762073] Console: switching to colour frame buffer device 160x64 [12997.762101] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [12997.762106] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [12997.762110] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [12997.762115] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [12997.773285] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [12997.773296] [drm] TMDS-8: set mode 1280x1024 26 [12997.773637] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [12997.783644] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [12997.783648] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [12997.783652] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [12997.783658] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [12997.795055] fb0: nouveaufb frame buffer device [12997.795067] registered panic notifier [12997.795082] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-646-g325047a329c08a5d2 for 0000:01:00.0 on minor 0 [13006.735918] nouveau 0000:01:00.0: Allocating FIFO number 1 [13006.736494] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [13017.606559] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [13017.606566] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13017.664692] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13017.664707] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [13017.664716] [drm] TMDS-8: set mode 28 [13017.664928] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13017.674935] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [13017.674939] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [13017.674943] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [13017.674948] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13017.675520] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13195.023575] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [13195.023583] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13195.126961] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13195.126976] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [13195.126986] [drm] TMDS-8: set mode 29 [13195.127205] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13195.137213] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [13195.137217] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [13195.137221] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [13195.137226] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13195.137966] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13537.232851] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [13561.469624] SysRq : Changing Loglevel [13561.470277] Loglevel set to 9 [13617.178375] SysRq : Changing Loglevel [13617.179027] Loglevel set to 9 [13635.179109] SysRq : Changing Loglevel [13635.179770] Loglevel set to 9 [13642.362994] nouveau 0000:01:00.0: Allocating FIFO number 1 [13642.363598] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [13653.329486] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [13653.329493] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13653.353628] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13653.353633] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13653.383534] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13653.383548] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [13653.383557] [drm] TMDS-8: set mode 2b [13653.383770] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13653.393777] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [13653.393782] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [13653.393786] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [13653.393790] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13653.394542] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13661.477655] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [13661.477662] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13661.488842] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13661.488847] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13661.564137] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13661.564151] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [13661.564161] [drm] TMDS-8: set mode 25 [13661.564373] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13661.574381] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [13661.574385] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [13661.574389] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [13661.574394] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13661.575108] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13869.624837] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [13869.625025] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13869.635035] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13869.650715] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [13869.650723] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [13869.650737] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [13869.650746] [drm] TMDS-8: set mode 1280x1024 26 [13869.650959] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [13869.660966] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [13869.660970] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [13869.660973] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [13869.660978] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [13899.447590] nouveau 0000:01:00.0: Allocating FIFO number 1 [13899.448185] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [13899.871605] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [14188.618610] nouveau 0000:01:00.0: Allocating FIFO number 1 [14188.619206] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [14189.012699] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [14366.291584] nouveau 0000:01:00.0: Allocating FIFO number 1 [14366.292183] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [14366.684717] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [14484.358091] nouveau 0000:01:00.0: Allocating FIFO number 1 [14484.358682] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [14484.752636] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [14574.942636] nouveau 0000:01:00.0: Allocating FIFO number 1 [14574.943278] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [14575.342643] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [14699.853630] nouveau 0000:01:00.0: Allocating FIFO number 1 [14699.854224] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [14720.715715] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [14720.715723] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14720.726459] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14720.726464] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [14720.798970] nouveau 0000:01:00.0: nouveau_gem_pushbuf_validate failed and gave up. [14720.798976] nouveau 0000:01:00.0: validate: -22 [14720.802364] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [14736.069935] SysRq : Keyboard mode set to system default [14742.382862] nouveau 0000:01:00.0: Allocating FIFO number 1 [14742.383498] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [14742.384755] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14742.384769] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [14742.384780] [drm] TMDS-8: set mode 1280x1024 39 [14742.385017] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [14742.395025] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [14742.395030] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [14742.395034] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [14742.395038] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [14742.417284] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [14767.402371] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [14791.116582] nouveau 0000:01:00.0: Allocating FIFO number 1 [14791.117177] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [14834.836890] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [14834.836897] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14834.862498] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14834.862503] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [14834.901861] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14834.901876] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [14834.901885] [drm] TMDS-8: set mode 3e [14834.902105] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [14834.912113] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [14834.912117] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [14834.912121] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [14834.912126] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [14834.912844] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [14932.801773] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [14932.801780] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14932.815971] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14932.815976] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [14932.895722] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [14932.895736] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [14932.895746] [drm] TMDS-8: set mode 3b [14932.895959] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [14932.905966] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [14932.905971] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [14932.905975] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [14932.905980] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [14932.906863] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [16350.905952] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [16370.840584] nouveau 0000:01:00.0: Allocating FIFO number 1 [16370.841183] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [16399.996552] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [16399.996559] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [16400.007316] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [16400.007320] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [16400.079421] nouveau 0000:01:00.0: nouveau_gem_pushbuf_validate failed and gave up. [16400.079427] nouveau 0000:01:00.0: validate: -22 [16400.082901] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [16421.357798] SysRq : Keyboard mode set to system default [16426.829630] nouveau 0000:01:00.0: Allocating FIFO number 1 [16426.830244] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [16426.831420] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [16426.831435] nouveau 0000:01:00.0: vpll: n 16 m 1 log2p 2 [16426.831445] [drm] TMDS-8: set mode 1280x1024 42 [16426.831659] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [16426.841666] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [16426.841671] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [16426.841675] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B [16426.841680] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [16426.863484] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0