This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30-ARCH i686 Current Operating System: Linux xps-m1530 2.6.31-rc8 #1 SMP Wed Sep 9 20:04:24 CEST 2009 i686 Build Date: 04 September 2009 03:37:03PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 9 20:27:49 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "geforce" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/misc, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/TTF, /usr/share/fonts/Type1, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (**) Extension "Composite" is enabled (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0xec0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0:1:0:0) 10de:0407:1028:022e nVidia Corporation G84 [GeForce 8600M GT] rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "nouveau" (II) Loading /usr/lib/xorg/modules/drivers//nouveau_drv.so (II) Module nouveau: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.0.10 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) NOUVEAU driver (II) NOUVEAU driver for NVIDIA chipset families : RIVA TNT (NV04) RIVA TNT2 (NV05) GeForce 256 (NV10) GeForce 2 (NV11, NV15) GeForce 4MX (NV17, NV18) GeForce 3 (NV20) GeForce 4Ti (NV25, NV28) GeForce FX (NV3x) GeForce 6 (NV4x) GeForce 7 (G7x) GeForce 8 (G8x) (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (--) NOUVEAU(0): Chipset: "NVIDIA NV84" (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) NOUVEAU(0): Initializing int10 (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "dri" (II) LoadModule: "dri" (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so (II) NOUVEAU(0): Loaded DRI module drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) NOUVEAU(0): [drm] nouveau interface version: 0.0.15 (--) NOUVEAU(0): [drm] kernel modesetting not available (--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3 (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 (==) NOUVEAU(0): RGB weight 888 (==) NOUVEAU(0): Default visual is TrueColor (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (==) NOUVEAU(0): Using HW cursor (--) NOUVEAU(0): Linear framebuffer at 0xE0000000 (--) NOUVEAU(0): MMIO registers at 0xF5000000 (II) NOUVEAU(0): Initial CRTC_OWNER is 0 (II) NOUVEAU(0): Attempting to load BIOS image from PRAMIN (II) NOUVEAU(0): ... appears to be valid (II) NOUVEAU(0): BIT BIOS found (II) NOUVEAU(0): Bios version 60.84.5e.00 (WW) NOUVEAU(0): TMDS table revision 2.0 not currently supported (II) NOUVEAU(0): Found Display Configuration Block version 4.0 (!!) NOUVEAU(0): Raw DCB entry 0: 01000323 00010034 (WW) NOUVEAU(0): G80+ LVDS not initialized by driver; ignoring conf bits (!!) NOUVEAU(0): Raw DCB entry 1: 02012300 00000028 (!!) NOUVEAU(0): Raw DCB entry 2: 02021312 00020010 (!!) NOUVEAU(0): Raw DCB entry 3: 010333f1 00c0c080 (!!) NOUVEAU(0): Raw DCB entry 4: 0000000e 00000000 (--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xC7F4 (--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xCB78 (--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xD5C8 (--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xD6BA (--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xD8ED (II) NOUVEAU(0): NV50DispPreInit is called. (WW) NOUVEAU(0): DCB encoder type 1 not known (II) NOUVEAU(0): I2C bus "LVDS-0" initialized. (II) NOUVEAU(0): I2C bus "VGA-0" initialized. (II) NOUVEAU(0): I2C bus "DVI-D-0" initialized. (II) NOUVEAU(0): Output VGA-0 has no monitor section (II) NOUVEAU(0): Output DVI-D-0 has no monitor section (II) NOUVEAU(0): Output LVDS-0 has no monitor section (II) NOUVEAU(0): nv50_output_detect is called. (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. (II) NOUVEAU(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60. (II) NOUVEAU(0): I2C device "VGA-0:ddc2" registered at address 0xA0. (II) NOUVEAU(0): Using bios provided load value of 279 (--) NOUVEAU(0): No Load present on DAC-1 (II) NOUVEAU(0): nv50_output_detect is called. (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. (II) NOUVEAU(0): I2C device "DVI-D-0:E-EDID segment register" registered at address 0x60. (II) NOUVEAU(0): I2C device "DVI-D-0:ddc2" registered at address 0xA0. (II) NOUVEAU(0): nv50_output_detect is called. (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. (II) NOUVEAU(0): I2C device "LVDS-0:E-EDID segment register" registered at address 0x60. (II) NOUVEAU(0): I2C device "LVDS-0:ddc2" registered at address 0xA0. (II) NOUVEAU(0): Detected a Digital output on LVDS-0 (II) NOUVEAU(0): Found a suitable output, index 0 (II) NOUVEAU(0): nv50_output_detect is called. (II) NOUVEAU(0): NV50ConnectorDDCDetect is called. (II) NOUVEAU(0): NV50ConnectorGetDDCModes is called. (II) NOUVEAU(0): EDID vendor "LPL", prod id 769 (II) NOUVEAU(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync. (II) NOUVEAU(0): LVDS-0: preferred mode is 1280x800 (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): nv50_output_mode_valid is called. (II) NOUVEAU(0): Output VGA-0 disconnected (II) NOUVEAU(0): Output DVI-D-0 disconnected (II) NOUVEAU(0): Output LVDS-0 connected (II) NOUVEAU(0): Using exact sizes for initial modes (II) NOUVEAU(0): Output LVDS-0 using initial mode 1280x800 (--) NOUVEAU(0): VideoRAM: 262144 kBytes (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) (--) NOUVEAU(0): Virtual size is 1280x800 (pitch 1280) (**) NOUVEAU(0): Driver mode "1280x800": 75.5 MHz (scaled from 0.0 MHz), 49.9 kHz, 60.0 Hz (II) NOUVEAU(0): Modeline "1280x800"x60.0 75.50 1280 1344 1392 1512 800 803 809 832 -hsync -vsync (49.9 kHz) (**) NOUVEAU(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (**) NOUVEAU(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) NOUVEAU(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) NOUVEAU(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) NOUVEAU(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) NOUVEAU(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz (II) NOUVEAU(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**) NOUVEAU(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) NOUVEAU(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) NOUVEAU(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) NOUVEAU(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) NOUVEAU(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) NOUVEAU(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz (II) NOUVEAU(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (**) NOUVEAU(0): Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz (II) NOUVEAU(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (==) NOUVEAU(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "shadowfb" (II) LoadModule: "shadowfb" (II) Loading /usr/lib/xorg/modules//libshadowfb.so (II) Module shadowfb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NOUVEAU(0): Opened GPU channel 2 (II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables. (II) NOUVEAU(0): [drm] framebuffer handle = 0x2c000000 (II) NOUVEAU(0): [drm] added 1 reserved context for kernel (II) NOUVEAU(0): X context handle = 0x1 (II) NOUVEAU(0): [drm] installed DRM signal handler (II) NOUVEAU(0): Allocated 124MiB VRAM for offscreen pixmaps (II) NOUVEAU(0): AGPGART: 512MiB available (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer (II) EXA(0): Offscreen pixmap area of 130121728 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (II) UploadToScreen (II) DownloadFromScreen (==) NOUVEAU(0): Backing store disabled (==) NOUVEAU(0): Silken mouse enabled (II) NOUVEAU(0): [DRI] installation complete (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. (II) NOUVEAU(0): [XvMC] Extension initialized. (II) NOUVEAU(0): NVEnterVT is called. (II) NOUVEAU(0): NV50DispInit is called. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50DacGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_output_dpms is called with mode 3. (II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50SorGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_output_dpms is called with mode 3. (II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50SorGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_output_dpms is called with mode 3. (II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50DacGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50SorGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50SorGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC0. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50DacGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50SorGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_output_get_crtc is called. (II) NOUVEAU(0): NV50SorGetCurrentCrtc is called. (II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC1. (II) NOUVEAU(0): nv50_output_prepare is called. (II) NOUVEAU(0): nv50_crtc_prepare is called for CRTC0. (II) NOUVEAU(0): NV50DacModeSet is called. (II) NOUVEAU(0): Disconnecting DAC. (II) NOUVEAU(0): NV50SorModeSet is called. (II) NOUVEAU(0): Disconnecting SOR. (II) NOUVEAU(0): nv50_crtc_mode_set is called for CRTC0. (II) NOUVEAU(0): NV50CrtcModeSet is called for CRTC0. (II) NOUVEAU(0): NV50CrtcSetDither is called (no update). (II) NOUVEAU(0): NV50CrtcBlank is called (unblanked) for CRTC0. (II) NOUVEAU(0): nv50_output_mode_set is called. (II) NOUVEAU(0): NV50SorModeSet is called. (II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 0. (II) NOUVEAU(0): NV50CrtcSetScale is called with mode 2 for CRTC0. (II) NOUVEAU(0): nv50_crtc_commit is called for CRTC0. (II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC1. (II) NOUVEAU(0): NV50CrtcSetPixelClock is called for CRTC0. (II) NOUVEAU(0): NV50CrtcSetClockMode is called for CRTC0. (II) NOUVEAU(0): NV50SorSetClockMode is called. (II) NOUVEAU(0): nv50_output_commit is called. (II) NOUVEAU(0): nv50_output_dpms is called with mode 3. (II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3. (II) NOUVEAU(0): nv50_output_dpms is called with mode 3. (II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3. (II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC1. (II) NOUVEAU(0): DPMS enabled (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) NOUVEAU(0): nv50_crtc_gamma_set is called for CRTC0. (II) NOUVEAU(0): NV50CrtcGammaSet is called for CRTC0. (II) NOUVEAU(0): nv50_crtc_gamma_set is called for CRTC1. (II) NOUVEAU(0): NV50CrtcGammaSet is called for CRTC1. (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/nouveau_dri.so failed (/usr/lib/xorg/modules/dri/nouveau_dri.so: cannot open shared object file: No such file or directory) (EE) AIGLX: reverting to software rendering (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) NOUVEAU(0): Setting screen physical size to 331 x 207 resize called 1280 800 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_variant" "intl" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event3" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.1.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 1.1.3 (**) Option "Device" "/dev/input/event6" (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127 (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0 (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle (**) Option "TapButton1" "1" (**) Option "TapButton2" "2" (**) Option "TapButton3" "3" (--) AlpsPS/2 ALPS GlidePoint: touchpad found (**) AlpsPS/2 ALPS GlidePoint: always reports core events (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD) (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms (**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0 (--) AlpsPS/2 ALPS GlidePoint: touchpad found (II) config/hal: Adding input device PS/2 Mouse (**) PS/2 Mouse: always reports core events (**) PS/2 Mouse: Device: "/dev/input/event5" (II) PS/2 Mouse: Found 3 mouse buttons (II) PS/2 Mouse: Found x and y relative axes (II) PS/2 Mouse: Configuring as mouse (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Mouse: (accel) set acceleration profile 0 (II) PS/2 Mouse: initialized for relative axes. (II) config/hal: Adding input device Broadcom Corp (**) Broadcom Corp: always reports core events (**) Broadcom Corp: Device: "/dev/input/event9" (II) Broadcom Corp: Found 3 mouse buttons (II) Broadcom Corp: Found x and y relative axes (II) Broadcom Corp: Configuring as mouse (**) Broadcom Corp: YAxisMapping: buttons 4 and 5 (**) Broadcom Corp: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE) (**) Broadcom Corp: (accel) keeping acceleration scheme 1 (**) Broadcom Corp: (accel) filter chain progression: 2.00 (**) Broadcom Corp: (accel) filter stage 0: 20.00 ms (**) Broadcom Corp: (accel) set acceleration profile 0 (II) Broadcom Corp: initialized for relative axes. (II) config/hal: Adding input device Logitech Optical USB Mouse (**) Logitech Optical USB Mouse: always reports core events (**) Logitech Optical USB Mouse: Device: "/dev/input/event7" (II) Logitech Optical USB Mouse: Found 3 mouse buttons (II) Logitech Optical USB Mouse: Found x and y relative axes (II) Logitech Optical USB Mouse: Found scroll wheel(s) (II) Logitech Optical USB Mouse: Configuring as mouse (**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE) (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1 (**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00 (**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech Optical USB Mouse: (accel) set acceleration profile 0 (II) Logitech Optical USB Mouse: initialized for relative axes. (II) config/hal: Adding input device Broadcom Corp (**) Broadcom Corp: always reports core events (**) Broadcom Corp: Device: "/dev/input/event8" (II) Broadcom Corp: Found keys (II) Broadcom Corp: Configuring as keyboard (II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_variant" "intl" (II) config/hal: Adding input device Sleep Button (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event2" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_variant" "intl" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_variant" "intl" (II) AT Translated Set 2 keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) UnloadModule: "synaptics" (II) PS/2 Mouse: Close (II) UnloadModule: "evdev" (II) Broadcom Corp: Close (II) UnloadModule: "evdev" (II) Logitech Optical USB Mouse: Close (II) UnloadModule: "evdev" (II) Broadcom Corp: Close (II) UnloadModule: "evdev" (II) Sleep Button: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) NOUVEAU(0): [drm] removed 1 reserved context for kernel (II) NOUVEAU(0): NVLeaveVT is called. (II) NOUVEAU(0): NV50DispShutdown is called. (II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC0. (II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC1. (II) NOUVEAU(0): Closed GPU channel 2