Sep 17 18:19:54 [kernel] Linux version 2.6.31-rc8-ge3ac207 (root@darwin) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #39 SMP PREEMPT Thu Sep 17 18:18:39 CEST 2009 Sep 17 18:19:54 [kernel] KERNEL supported cpus: Sep 17 18:19:54 [kernel] Intel GenuineIntel Sep 17 18:19:54 [kernel] AMD AuthenticAMD Sep 17 18:19:54 [kernel] NSC Geode by NSC Sep 17 18:19:54 [kernel] Cyrix CyrixInstead Sep 17 18:19:54 [kernel] Centaur CentaurHauls Sep 17 18:19:54 [kernel] Transmeta GenuineTMx86 Sep 17 18:19:54 [kernel] Transmeta TransmetaCPU Sep 17 18:19:54 [kernel] UMC UMC UMC UMC Sep 17 18:19:54 [kernel] BIOS-provided physical RAM map: Sep 17 18:19:54 [kernel] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Sep 17 18:19:54 [kernel] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Sep 17 18:19:54 [kernel] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) Sep 17 18:19:54 [kernel] BIOS-e820: 0000000000100000 - 000000007ff40000 (usable) Sep 17 18:19:54 [kernel] BIOS-e820: 000000007ff40000 - 000000007ff4e000 (ACPI data) Sep 17 18:19:54 [kernel] BIOS-e820: 000000007ff4e000 - 000000007ffe0000 (ACPI NVS) Sep 17 18:19:54 [kernel] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) Sep 17 18:19:54 [kernel] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 17 18:19:54 [kernel] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Sep 17 18:19:54 [kernel] DMI 2.4 present. Sep 17 18:19:54 [kernel] AMI BIOS detected: BIOS may corrupt low RAM, working around it. Sep 17 18:19:54 [kernel] last_pfn = 0x7ff40 max_arch_pfn = 0x100000 Sep 17 18:19:54 [kernel] Warning only 895MB will be used. Sep 17 18:19:54 [kernel] Use a HIGHMEM enabled kernel. Sep 17 18:19:54 [kernel] init_memory_mapping: 0000000000000000-0000000037f1d000 Sep 17 18:19:54 [kernel] ACPI: RSDP 000faff0 00024 (v02 ACPIAM) Sep 17 18:19:54 [kernel] ACPI: XSDT 7ff40100 00054 (v01 A_M_I_ OEMXSDT 12000810 MSFT 00000097) Sep 17 18:19:54 [acpid] starting up with proc fs_ Sep 17 18:19:54 [kernel] ACPI: DSDT 7ff40440 09516 (v01 A0963 A0963031 00000031 INTL 20060113) Sep 17 18:19:54 [kernel] ACPI: FACS 7ff4e000 00040 Sep 17 18:19:54 [kernel] ACPI: APIC 7ff40390 0006C (v01 A_M_I_ OEMAPIC 12000810 MSFT 00000097) Sep 17 18:19:54 [kernel] ACPI: MCFG 7ff40400 0003C (v01 A_M_I_ OEMMCFG 12000810 MSFT 00000097) Sep 17 18:19:54 [kernel] ACPI: OEMB 7ff4e040 00081 (v01 A_M_I_ AMI_OEM 12000810 MSFT 00000097) Sep 17 18:19:54 [kernel] ACPI: HPET 7ff49960 00038 (v01 A_M_I_ OEMHPET 12000810 MSFT 00000097) Sep 17 18:19:54 [kernel] ACPI: OSFR 7ff499a0 000B0 (v01 A_M_I_ OEMOSFR 12000810 MSFT 00000097) Sep 17 18:19:54 [kernel] 895MB LOWMEM available. Sep 17 18:19:54 [kernel] mapped low ram: 0 - 37f1d000 Sep 17 18:19:54 [kernel] low ram: 0 - 37f1d000 Sep 17 18:19:54 [kernel] node 0 low ram: 00000000 - 37f1d000 Sep 17 18:19:54 [kernel] node 0 bootmap 00011000 - 00017fe4 Sep 17 18:19:54 [kernel] (8 early reservations) ==> bootmem [0000000000 - 0037f1d000] Sep 17 18:19:54 [kernel] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Sep 17 18:19:54 [kernel] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Sep 17 18:19:54 [kernel] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Sep 17 18:19:54 [kernel] #3 [0001000000 - 00015167bc] TEXT DATA BSS ==> [0001000000 - 00015167bc] Sep 17 18:19:54 [kernel] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] Sep 17 18:19:54 [kernel] #5 [0001517000 - 000151d234] BRK ==> [0001517000 - 000151d234] Sep 17 18:19:54 [kernel] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Sep 17 18:19:54 [kernel] #7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Sep 17 18:19:54 [kernel] found SMP MP-table at [c00ff780] ff780 Sep 17 18:19:54 [kernel] Zone PFN ranges: Sep 17 18:19:54 [kernel] DMA 0x00000010 -> 0x00001000 Sep 17 18:19:54 [kernel] Normal 0x00001000 -> 0x00037f1d Sep 17 18:19:54 [kernel] Movable zone start PFN for each node Sep 17 18:19:54 [kernel] early_node_map[2] active PFN ranges Sep 17 18:19:54 [kernel] 0: 0x00000010 -> 0x0000009e Sep 17 18:19:54 [kernel] 0: 0x00000100 -> 0x00037f1d Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Sep 17 18:19:54 [kernel] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) Sep 17 18:19:54 [kernel] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 Sep 17 18:19:54 [kernel] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 17 18:19:54 [kernel] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Sep 17 18:19:54 [kernel] Enabling APIC mode: Flat. Using 1 I/O APICs Sep 17 18:19:54 [kernel] Using ACPI (MADT) for SMP configuration information Sep 17 18:19:54 [kernel] ACPI: HPET id: 0x8086a301 base: 0xfed00000 Sep 17 18:19:54 [kernel] SMP: Allowing 4 CPUs, 0 hotplug CPUs Sep 17 18:19:54 [kernel] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000) Sep 17 18:19:54 [kernel] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 Sep 17 18:19:54 [kernel] PERCPU: Embedded 11 pages at c1c22000, static data 22748 bytes Sep 17 18:19:54 [kernel] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227244 Sep 17 18:19:54 [kernel] Kernel command line: root=/dev/md3 Sep 17 18:19:54 [kernel] PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 17 18:19:54 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 17 18:19:54 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 17 18:19:54 [kernel] Enabling fast FPU save and restore... done. Sep 17 18:19:54 [kernel] Enabling unmasked SIMD FPU exception support... done. Sep 17 18:19:54 [kernel] Initializing CPU#0 Sep 17 18:19:54 [kernel] Memory: 902580k/916596k available (3284k kernel code, 13392k reserved, 1155k data, 360k init, 0k highmem) Sep 17 18:19:54 [kernel] virtual kernel memory layout: Sep 17 18:19:54 [kernel] fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) Sep 17 18:19:54 [kernel] vmalloc : 0xf871d000 - 0xfff1d000 ( 120 MB) Sep 17 18:19:54 [kernel] lowmem : 0xc0000000 - 0xf7f1d000 ( 895 MB) Sep 17 18:19:54 [kernel] .init : 0xc1456000 - 0xc14b0000 ( 360 kB) Sep 17 18:19:54 [kernel] .data : 0xc1335263 - 0xc1455e80 (1155 kB) Sep 17 18:19:54 [kernel] .text : 0xc1000000 - 0xc1335263 (3284 kB) Sep 17 18:19:54 [kernel] Checking if this processor honours the WP bit even in supervisor mode...Ok. Sep 17 18:19:54 [kernel] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Sep 17 18:19:54 [kernel] NR_IRQS:512 Sep 17 18:19:54 [kernel] Extended CMOS year: 2000 Sep 17 18:19:54 [kernel] Fast TSC calibration using PIT Sep 17 18:19:54 [kernel] Detected 2671.490 MHz processor. Sep 17 18:19:54 [kernel] Console: colour VGA+ 80x25 Sep 17 18:19:54 [kernel] console [tty0] enabled Sep 17 18:19:54 [kernel] HPET: 4 timers in total, 0 timers will be used for per-cpu timer Sep 17 18:19:54 [kernel] Calibrating delay loop (skipped), value calculated using timer frequency.. 5342.98 BogoMIPS (lpj=2671490) Sep 17 18:19:54 [kernel] Mount-cache hash table entries: 512 Sep 17 18:19:54 [kernel] CPU: L1 I cache: 32K, L1 D cache: 32K Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K Sep 17 18:19:54 [kernel] CPU: Physical Processor ID: 0 Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 0 Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks Sep 17 18:19:54 [kernel] CPU0: Thermal monitoring enabled (TM2) Sep 17 18:19:54 [kernel] using mwait in idle threads. Sep 17 18:19:54 [kernel] Checking 'hlt' instruction... OK. Sep 17 18:19:54 [kernel] Freeing SMP alternatives: 14k freed Sep 17 18:19:54 [kernel] ACPI: Core revision 20090521 Sep 17 18:19:54 [kernel] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 17 18:19:54 [kernel] CPU0: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 Sep 17 18:19:54 [kernel] Booting processor 1 APIC 0x1 ip 0x6000 Sep 17 18:19:54 [kernel] Initializing CPU#1 Sep 17 18:19:54 [kernel] Calibrating delay using timer specific routine.. 5343.00 BogoMIPS (lpj=2671504) Sep 17 18:19:54 [kernel] CPU: L1 I cache: 32K, L1 D cache: 32K Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K Sep 17 18:19:54 [kernel] CPU: Physical Processor ID: 0 Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 1 Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks Sep 17 18:19:54 [kernel] CPU1: Thermal monitoring enabled (TM2) Sep 17 18:19:54 [kernel] CPU1: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 Sep 17 18:19:54 [kernel] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Sep 17 18:19:54 [kernel] Booting processor 2 APIC 0x2 ip 0x6000 Sep 17 18:19:54 [kernel] Initializing CPU#2 Sep 17 18:19:54 [kernel] Calibrating delay using timer specific routine.. 5343.02 BogoMIPS (lpj=2671513) Sep 17 18:19:54 [kernel] CPU: L1 I cache: 32K, L1 D cache: 32K Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K Sep 17 18:19:54 [kernel] CPU: Physical Processor ID: 0 Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 2 Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks Sep 17 18:19:54 [kernel] CPU2: Thermal monitoring enabled (TM2) Sep 17 18:19:54 [kernel] CPU2: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 Sep 17 18:19:54 [kernel] checking TSC synchronization [CPU#0 -> CPU#2]: passed. Sep 17 18:19:54 [kernel] Booting processor 3 APIC 0x3 ip 0x6000 Sep 17 18:19:54 [kernel] Initializing CPU#3 Sep 17 18:19:54 [kernel] Calibrating delay using timer specific routine.. 5343.02 BogoMIPS (lpj=2671514) Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 3 Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks Sep 17 18:19:54 [kernel] CPU3: Thermal monitoring enabled (TM2) Sep 17 18:19:54 [kernel] CPU3: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 Sep 17 18:19:54 [kernel] checking TSC synchronization [CPU#0 -> CPU#3]: passed. Sep 17 18:19:54 [kernel] Brought up 4 CPUs Sep 17 18:19:54 [kernel] Total of 4 processors activated (21372.04 BogoMIPS). Sep 17 18:19:54 [kernel] NET: Registered protocol family 16 Sep 17 18:19:54 [kernel] ACPI: bus type pci registered Sep 17 18:19:54 [kernel] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Sep 17 18:19:54 [kernel] PCI: Not using MMCONFIG. Sep 17 18:19:54 [kernel] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=10 Sep 17 18:19:54 [kernel] PCI: Using configuration type 1 for base access Sep 17 18:19:54 [kernel] bio: create slab at 0 Sep 17 18:19:54 [kernel] ACPI: Interpreter enabled Sep 17 18:19:54 [kernel] ACPI: (supports S0 S5) Sep 17 18:19:54 [kernel] ACPI: Using IOAPIC for interrupt routing Sep 17 18:19:54 [kernel] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Sep 17 18:19:54 [kernel] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources Sep 17 18:19:54 [kernel] PCI: Using MMCONFIG for extended config space Sep 17 18:19:54 [kernel] ACPI: No dock devices found. Sep 17 18:19:54 [kernel] ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:00:1a.7: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:00:1d.7: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Sep 17 18:19:54 [kernel] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO Sep 17 18:19:54 [kernel] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) Sep 17 18:19:54 [kernel] pci 0000:00:1f.2: PME# supported from D3hot Sep 17 18:19:54 [kernel] pci 0000:00:1f.2: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PME# supported from D0 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:03:00.0: PME# supported from D0 D1 D3hot Sep 17 18:19:54 [kernel] pci 0000:03:00.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:02:00.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold Sep 17 18:19:54 [kernel] pci 0000:0a:04.0: PME# disabled Sep 17 18:19:54 [kernel] pci 0000:00:1e.0: transparent bridge Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Sep 17 18:19:54 [kernel] SCSI subsystem initialized Sep 17 18:19:54 [kernel] usbcore: registered new interface driver usbfs Sep 17 18:19:54 [kernel] usbcore: registered new interface driver hub Sep 17 18:19:54 [kernel] usbcore: registered new device driver usb Sep 17 18:19:54 [kernel] PCI: Using ACPI for IRQ routing Sep 17 18:19:54 [kernel] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 Sep 17 18:19:54 [kernel] hpet0: 4 comparators, 64-bit 14.318180 MHz counter Sep 17 18:19:54 [kernel] pnp: PnP ACPI init Sep 17 18:19:54 [kernel] ACPI: bus type pnp registered Sep 17 18:19:54 [kernel] pnp: PnP ACPI: found 15 devices Sep 17 18:19:54 [kernel] ACPI: ACPI bus type pnp unregistered Sep 17 18:19:54 [kernel] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved Sep 17 18:19:54 [kernel] system 00:06: ioport range 0x290-0x297 has been reserved Sep 17 18:19:54 [kernel] system 00:07: ioport range 0x4d0-0x4d1 has been reserved Sep 17 18:19:54 [kernel] system 00:07: ioport range 0x800-0x87f has been reserved Sep 17 18:19:54 [kernel] system 00:07: ioport range 0x480-0x4bf has been reserved Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved Sep 17 18:19:54 [kernel] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved Sep 17 18:19:54 [kernel] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved Sep 17 18:19:54 [kernel] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0x0-0x9ffff could not be reserved Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved Sep 17 18:19:54 [kernel] pci 0000:0a:04.0: BAR 6: address space collision on of device [0xfebc0000-0xfebdffff] Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 Sep 17 18:19:54 [kernel] pci 0000:00:01.0: IO window: 0xa000-0xafff Sep 17 18:19:54 [kernel] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe7fffff Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff Sep 17 18:19:54 [kernel] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 Sep 17 18:19:54 [kernel] pci 0000:08:00.0: IO window: 0xd000-0xdfff Sep 17 18:19:54 [kernel] pci 0000:08:00.0: MEM window: disabled Sep 17 18:19:54 [kernel] pci 0000:08:00.0: PREFETCH window: disabled Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PCI bridge, secondary bus 0000:08 Sep 17 18:19:54 [kernel] pci 0000:05:01.0: IO window: 0xd000-0xdfff Sep 17 18:19:54 [kernel] pci 0000:05:01.0: MEM window: disabled Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PREFETCH window: disabled Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PCI bridge, secondary bus 0000:07 Sep 17 18:19:54 [kernel] pci 0000:05:02.0: IO window: disabled Sep 17 18:19:54 [kernel] pci 0000:05:02.0: MEM window: disabled Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PCI bridge, secondary bus 0000:06 Sep 17 18:19:54 [kernel] pci 0000:05:03.0: IO window: disabled Sep 17 18:19:54 [kernel] pci 0000:05:03.0: MEM window: disabled Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PREFETCH window: 0x000000f8e00000-0x000000f8efffff Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 Sep 17 18:19:54 [kernel] pci 0000:04:00.0: IO window: 0xd000-0xdfff Sep 17 18:19:54 [kernel] pci 0000:04:00.0: MEM window: disabled Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PREFETCH window: 0x000000f8e00000-0x000000f8ffffff Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: IO window: 0xd000-0xdfff Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PREFETCH window: 0x000000f8e00000-0x000000f8ffffff Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: IO window: 0xc000-0xcfff Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: MEM window: 0xfe900000-0xfe9fffff Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PREFETCH window: disabled Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: IO window: 0xb000-0xbfff Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: MEM window: 0xfe800000-0xfe8fffff Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PREFETCH window: disabled Sep 17 18:19:54 [kernel] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a Sep 17 18:19:54 [kernel] pci 0000:00:1e.0: IO window: 0xe000-0xefff Sep 17 18:19:54 [kernel] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff Sep 17 18:19:54 [kernel] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 17 18:19:54 [kernel] pci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 Sep 17 18:19:54 [kernel] NET: Registered protocol family 2 Sep 17 18:19:54 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 17 18:19:54 [kernel] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Sep 17 18:19:54 [kernel] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Sep 17 18:19:54 [kernel] TCP: Hash tables configured (established 131072 bind 65536) Sep 17 18:19:54 [kernel] TCP reno registered Sep 17 18:19:54 [kernel] NET: Registered protocol family 1 Sep 17 18:19:54 [kernel] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703 Sep 17 18:19:54 [kernel] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703 Sep 17 18:19:54 [kernel] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703 Sep 17 18:19:54 [kernel] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703 Sep 17 18:19:54 [kernel] Microcode Update Driver: v2.00 , Peter Oruba Sep 17 18:19:54 [kernel] fuse init (API version 7.12) Sep 17 18:19:54 [kernel] msgmni has been set to 1763 Sep 17 18:19:54 [kernel] alg: No test for stdrng (krng) Sep 17 18:19:54 [kernel] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) Sep 17 18:19:54 [kernel] io scheduler noop registered Sep 17 18:19:54 [kernel] io scheduler deadline registered (default) Sep 17 18:19:54 [kernel] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Sep 17 18:19:54 [kernel] ACPI: Power Button [PWRF] Sep 17 18:19:54 [kernel] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Sep 17 18:19:54 [kernel] ACPI: Power Button [PWRB] Sep 17 18:19:54 [kernel] ACPI: SSDT 7ff4e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) Sep 17 18:19:54 [kernel] processor LNXCPU:00: registered as cooling_device0 Sep 17 18:19:54 [kernel] ACPI: SSDT 7ff4e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) Sep 17 18:19:54 [kernel] processor LNXCPU:01: registered as cooling_device1 Sep 17 18:19:54 [kernel] processor LNXCPU:02: registered as cooling_device2 Sep 17 18:19:54 [kernel] ACPI: SSDT 7ff4e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) Sep 17 18:19:54 [kernel] processor LNXCPU:03: registered as cooling_device3 Sep 17 18:19:54 [kernel] Real Time Clock Driver v1.12b Sep 17 18:19:54 [kernel] Linux agpgart interface v0.103 Sep 17 18:19:54 [kernel] [drm] Initialized drm 1.1.0 20060810 Sep 17 18:19:54 [kernel] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Sep 17 18:19:54 [kernel] loop: module loaded Sep 17 18:19:54 [kernel] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 Sep 17 18:19:54 [kernel] ahci: SSS flag set, parallel bus scan disabled Sep 17 18:19:54 [kernel] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Sep 17 18:19:54 [kernel] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems Sep 17 18:19:54 [kernel] scsi0 : ahci Sep 17 18:19:54 [kernel] scsi1 : ahci Sep 17 18:19:54 [kernel] scsi2 : ahci Sep 17 18:19:54 [kernel] scsi3 : ahci Sep 17 18:19:54 [kernel] scsi4 : ahci Sep 17 18:19:54 [kernel] scsi5 : ahci Sep 17 18:19:54 [kernel] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 32 Sep 17 18:19:54 [kernel] ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 32 Sep 17 18:19:54 [kernel] ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 32 Sep 17 18:19:54 [kernel] ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 32 Sep 17 18:19:54 [kernel] ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 32 Sep 17 18:19:54 [kernel] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 32 Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: controller can't do PMP, turning off CAP_PMP Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: MV_AHCI HACK: port_map 1f -> f Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this. Sep 17 18:19:54 [kernel] ahci: SSS flag set, parallel bus scan disabled Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 5 ports 3 Gbps 0xf impl IDE mode Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: flags: 64bit stag slum part Sep 17 18:19:54 [kernel] scsi6 : ahci Sep 17 18:19:54 [kernel] scsi7 : ahci Sep 17 18:19:54 [kernel] scsi8 : ahci Sep 17 18:19:54 [kernel] scsi9 : ahci Sep 17 18:19:54 [kernel] scsi10 : ahci Sep 17 18:19:54 [kernel] ata7: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 16 Sep 17 18:19:54 [kernel] ata8: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 16 Sep 17 18:19:54 [kernel] ata9: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 16 Sep 17 18:19:54 [kernel] ata10: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 16 Sep 17 18:19:54 [kernel] ata11: DUMMY Sep 17 18:19:54 [kernel] skge 0000:0a:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Sep 17 18:19:54 [kernel] skge 1.13 addr 0xfebfc000 irq 19 chip Yukon-Lite rev 9 Sep 17 18:19:54 [kernel] skge eth0: addr 00:1f:c6:5c:93:38 Sep 17 18:19:54 [kernel] sky2 driver version 1.23 Sep 17 18:19:54 [kernel] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 17 18:19:54 [kernel] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 Sep 17 18:19:54 [kernel] sky2 eth1: addr 00:1f:c6:5c:94:1f Sep 17 18:19:54 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: EHCI Host Controller Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: debug port 1 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 Sep 17 18:19:54 [kernel] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Sep 17 18:19:54 [kernel] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb1: Product: EHCI Host Controller Sep 17 18:19:54 [kernel] usb usb1: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 1-0:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 1-0:1.0: 6 ports detected Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: EHCI Host Controller Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: debug port 1 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Sep 17 18:19:54 [kernel] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Sep 17 18:19:54 [kernel] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb2: Product: EHCI Host Controller Sep 17 18:19:54 [kernel] usb usb2: Manufacturer: Linux 2.6.31-rc8-ge3ac207 ehci_hcd Sep 17 18:19:54 [kernel] usb usb2: SerialNumber: 0000:00:1d.7 Sep 17 18:19:54 [kernel] usb usb2: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 2-0:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 2-0:1.0: 6 ports detected Sep 17 18:19:54 [kernel] uhci_hcd: USB Universal Host Controller Interface driver Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: UHCI Host Controller Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: detected 2 ports Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800 Sep 17 18:19:54 [kernel] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Sep 17 18:19:54 [kernel] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb3: Product: UHCI Host Controller Sep 17 18:19:54 [kernel] usb usb3: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd Sep 17 18:19:54 [kernel] usb usb3: SerialNumber: 0000:00:1a.0 Sep 17 18:19:54 [kernel] usb usb3: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 3-0:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 3-0:1.0: 2 ports detected Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: UHCI Host Controller Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: detected 2 ports Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880 Sep 17 18:19:54 [kernel] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Sep 17 18:19:54 [kernel] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb4: Product: UHCI Host Controller Sep 17 18:19:54 [kernel] usb usb4: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd Sep 17 18:19:54 [kernel] usb usb4: SerialNumber: 0000:00:1a.1 Sep 17 18:19:54 [kernel] usb usb4: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 4-0:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 4-0:1.0: 2 ports detected Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: UHCI Host Controller Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: detected 2 ports Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00 Sep 17 18:19:54 [kernel] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Sep 17 18:19:54 [kernel] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb5: Product: UHCI Host Controller Sep 17 18:19:54 [kernel] usb usb5: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd Sep 17 18:19:54 [kernel] usb usb5: SerialNumber: 0000:00:1a.2 Sep 17 18:19:54 [kernel] usb usb5: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 5-0:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 5-0:1.0: 2 ports detected Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: UHCI Host Controller Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: detected 2 ports Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080 Sep 17 18:19:54 [kernel] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 Sep 17 18:19:54 [kernel] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb6: Product: UHCI Host Controller Sep 17 18:19:54 [kernel] usb usb6: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd Sep 17 18:19:54 [kernel] usb usb6: SerialNumber: 0000:00:1d.0 Sep 17 18:19:54 [kernel] usb usb6: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 6-0:1.0: USB hub found Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: UHCI Host Controller Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: detected 2 ports Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400 Sep 17 18:19:54 [kernel] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 Sep 17 18:19:54 [kernel] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb7: Product: UHCI Host Controller Sep 17 18:19:54 [kernel] usb usb7: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd Sep 17 18:19:54 [kernel] usb usb7: SerialNumber: 0000:00:1d.1 Sep 17 18:19:54 [kernel] usb usb7: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 7-0:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 7-0:1.0: 2 ports detected Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: UHCI Host Controller Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: detected 2 ports Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480 Sep 17 18:19:54 [kernel] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 Sep 17 18:19:54 [kernel] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 17 18:19:54 [kernel] usb usb8: Product: UHCI Host Controller Sep 17 18:19:54 [kernel] usb usb8: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd Sep 17 18:19:54 [kernel] usb usb8: SerialNumber: 0000:00:1d.2 Sep 17 18:19:54 [kernel] usb usb8: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 8-0:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 8-0:1.0: 2 ports detected Sep 17 18:19:54 [kernel] Initializing USB Mass Storage driver... Sep 17 18:19:54 [kernel] usbcore: registered new interface driver usb-storage Sep 17 18:19:54 [kernel] USB Mass Storage support registered. Sep 17 18:19:54 [kernel] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Sep 17 18:19:54 [kernel] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Sep 17 18:19:54 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 17 18:19:54 [kernel] mice: PS/2 mouse device common for all mice Sep 17 18:19:54 [kernel] coretemp coretemp.0: Using relative temperature scale! Sep 17 18:19:54 [kernel] coretemp coretemp.1: Using relative temperature scale! Sep 17 18:19:54 [kernel] coretemp coretemp.2: Using relative temperature scale! Sep 17 18:19:54 [kernel] coretemp coretemp.3: Using relative temperature scale! Sep 17 18:19:54 [kernel] md: raid0 personality registered for level 0 Sep 17 18:19:54 [kernel] md: raid1 personality registered for level 1 Sep 17 18:19:54 [kernel] cpuidle: using governor ladder Sep 17 18:19:54 [kernel] usbcore: registered new interface driver usbhid Sep 17 18:19:54 [kernel] usbhid: v2.6:USB HID core driver Sep 17 18:19:54 [kernel] AV200 0000:09:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 17 18:19:54 [kernel] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 17 18:19:54 [kernel] ata1.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 Sep 17 18:19:54 [kernel] ata1.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) Sep 17 18:19:54 [kernel] ata7: SATA link down (SStatus 0 SControl 300) Sep 17 18:19:54 [kernel] ata1.00: configured for UDMA/133 Sep 17 18:19:54 [kernel] scsi 0:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) Sep 17 18:19:54 [kernel] sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] Write Protect is off Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 17 18:19:54 [kernel] sda: Sep 17 18:19:54 [kernel] sda1 sda2 sda3 Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] Attached SCSI disk Sep 17 18:19:54 [kernel] usb 2-2: new high speed USB device using ehci_hcd and address 3 Sep 17 18:19:54 [kernel] usb 2-2: New USB device found, idVendor=0424, idProduct=2504 Sep 17 18:19:54 [kernel] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Sep 17 18:19:54 [kernel] usb 2-2: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] hub 2-2:1.0: USB hub found Sep 17 18:19:54 [kernel] hub 2-2:1.0: 4 ports detected Sep 17 18:19:54 [kernel] usb 6-1: new low speed USB device using uhci_hcd and address 2 Sep 17 18:19:54 [kernel] ALSA device list: Sep 17 18:19:54 [kernel] NET: Registered protocol family 10 Sep 17 18:19:54 [kernel] IPv6 over IPv4 tunneling driver Sep 17 18:19:54 [kernel] NET: Registered protocol family 17 Sep 17 18:19:54 [kernel] Using IPI Shortcut mode Sep 17 18:19:54 [kernel] usb 6-1: New USB device found, idVendor=045e, idProduct=00db Sep 17 18:19:54 [kernel] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 17 18:19:54 [kernel] usb 6-1: Product: Natural® Ergonomic Keyboard 4000 Sep 17 18:19:54 [kernel] usb 6-1: Manufacturer: Microsoft Sep 17 18:19:54 [kernel] usb 6-1: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input2 Sep 17 18:19:54 [kernel] microsoft 0003:045E:00DB.0001: input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input0 Sep 17 18:19:54 [kernel] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 17 18:19:54 [kernel] ata2.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 Sep 17 18:19:54 [kernel] ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32) Sep 17 18:19:54 [kernel] ata2.00: configured for UDMA/133 Sep 17 18:19:54 [kernel] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input3 Sep 17 18:19:54 [kernel] microsoft 0003:045E:00DB.0002: input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input1 Sep 17 18:19:54 [kernel] scsi 1:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB) Sep 17 18:19:54 [kernel] sd 1:0:0:0: Attached scsi generic sg1 type 0 Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] Write Protect is off Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 17 18:19:54 [kernel] sdb: Sep 17 18:19:54 [kernel] sdb1 sdb2 sdb3 Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] Attached SCSI disk Sep 17 18:19:54 [kernel] usb 7-2: new full speed USB device using uhci_hcd and address 2 Sep 17 18:19:54 [kernel] ata3: SATA link down (SStatus 0 SControl 300) Sep 17 18:19:54 [kernel] usb 7-2: New USB device found, idVendor=046d, idProduct=c041 Sep 17 18:19:54 [kernel] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 17 18:19:54 [kernel] usb 7-2: Product: USB Gaming Mouse Sep 17 18:19:54 [kernel] usb 7-2: Manufacturer: Logitech Sep 17 18:19:54 [kernel] usb 7-2: configuration #1 chosen from 1 choice Sep 17 18:19:54 [kernel] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4 Sep 17 18:19:54 [kernel] generic-usb 0003:046D:C041.0003: input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.1-2/input0 Sep 17 18:19:54 [kernel] generic-usb 0003:046D:C041.0004: claimed by neither input, hiddev nor hidraw Sep 17 18:19:54 [kernel] ata4.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL01, max UDMA/133 Sep 17 18:19:54 [kernel] ata4.00: configured for UDMA/133 Sep 17 18:19:54 [kernel] scsi 3:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL01 PQ: 0 ANSI: 5 Sep 17 18:19:54 [kernel] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Sep 17 18:19:54 [kernel] Uniform CD-ROM driver Revision: 3.20 Sep 17 18:19:54 [kernel] sr 3:0:0:0: Attached scsi generic sg2 type 5 Sep 17 18:19:54 [kernel] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 17 18:19:54 [kernel] ata5.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 Sep 17 18:19:54 [kernel] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) Sep 17 18:19:54 [kernel] ata5.00: configured for UDMA/133 Sep 17 18:19:54 [kernel] scsi 4:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] Write Protect is off Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 17 18:19:54 [kernel] sdc: Sep 17 18:19:54 [kernel] sd 4:0:0:0: Attached scsi generic sg3 type 0 Sep 17 18:19:54 [kernel] sdc1 Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] Attached SCSI disk Sep 17 18:19:54 [kernel] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 17 18:19:54 [kernel] ata6.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 Sep 17 18:19:54 [kernel] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) Sep 17 18:19:54 [kernel] ata6.00: configured for UDMA/133 Sep 17 18:19:54 [kernel] scsi 5:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Sep 17 18:19:54 [kernel] sd 5:0:0:0: Attached scsi generic sg4 type 0 Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] Write Protect is off Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 17 18:19:54 [kernel] sdd: sdd1 Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] Attached SCSI disk Sep 17 18:19:54 [kernel] ata8: SATA link down (SStatus 0 SControl 300) Sep 17 18:19:54 [kernel] ata9: SATA link down (SStatus 0 SControl 300) Sep 17 18:19:54 [kernel] ata10: SATA link down (SStatus 0 SControl 300) Sep 17 18:19:54 [kernel] md: Waiting for all devices to be available before autodetect Sep 17 18:19:54 [kernel] md: If you don't use raid, use raid=noautodetect Sep 17 18:19:54 [kernel] md: Autodetecting RAID arrays. Sep 17 18:19:54 [kernel] md: Scanned 6 and added 6 devices. Sep 17 18:19:54 [kernel] md: autorun ... Sep 17 18:19:54 [kernel] md: considering sdd1 ... Sep 17 18:19:54 [kernel] md: adding sdd1 ... Sep 17 18:19:54 [kernel] md: adding sdc1 ... Sep 17 18:19:54 [kernel] md: sdb3 has different UUID to sdd1 Sep 17 18:19:54 [kernel] md: sdb1 has different UUID to sdd1 Sep 17 18:19:54 [kernel] md: sda3 has different UUID to sdd1 Sep 17 18:19:54 [kernel] md: sda1 has different UUID to sdd1 Sep 17 18:19:54 [kernel] md: created md4 Sep 17 18:19:54 [kernel] md: bind Sep 17 18:19:54 [kernel] md: bind Sep 17 18:19:54 [kernel] md: running: Sep 17 18:19:54 [kernel] raid0: looking at sdd1 Sep 17 18:19:54 [kernel] raid0: comparing sdd1(1953519872) Sep 17 18:19:54 [kernel] with sdd1(1953519872) Sep 17 18:19:54 [kernel] raid0: END Sep 17 18:19:54 [kernel] raid0: ==> UNIQUE Sep 17 18:19:54 [kernel] raid0: 1 zones Sep 17 18:19:54 [kernel] raid0: looking at sdc1 Sep 17 18:19:54 [kernel] raid0: comparing sdc1(1953519872) Sep 17 18:19:54 [kernel] with sdd1(1953519872) Sep 17 18:19:54 [kernel] raid0: EQUAL Sep 17 18:19:54 [kernel] raid0: FINAL 1 zones Sep 17 18:19:54 [kernel] raid0: done. Sep 17 18:19:54 [kernel] raid0 : md_size is 3907039744 sectors. Sep 17 18:19:54 [kernel] ******* md4 configuration ********* Sep 17 18:19:54 [kernel] zone0=[sdc1/sdd1/] Sep 17 18:19:54 [kernel] zone offset=0kb device offset=0kb size=1953519872kb Sep 17 18:19:54 [kernel] ********************************** Sep 17 18:19:54 [kernel] md4: detected capacity change from 0 to 2000404348928 Sep 17 18:19:54 [kernel] md: considering sdb3 ... Sep 17 18:19:54 [kernel] md: adding sdb3 ... Sep 17 18:19:54 [kernel] md: sdb1 has different UUID to sdb3 Sep 17 18:19:54 [kernel] md: adding sda3 ... Sep 17 18:19:54 [kernel] md: sda1 has different UUID to sdb3 Sep 17 18:19:54 [kernel] md: created md3 Sep 17 18:19:54 [kernel] md: bind Sep 17 18:19:54 [kernel] md: bind Sep 17 18:19:54 [kernel] md: running: Sep 17 18:19:54 [kernel] raid0: looking at sdb3 Sep 17 18:19:54 [kernel] raid0: comparing sdb3(584781824) Sep 17 18:19:54 [kernel] with sdb3(584781824) Sep 17 18:19:54 [kernel] raid0: END Sep 17 18:19:54 [kernel] raid0: ==> UNIQUE Sep 17 18:19:54 [kernel] raid0: 1 zones Sep 17 18:19:54 [kernel] raid0: looking at sda3 Sep 17 18:19:54 [kernel] raid0: comparing sda3(584781824) Sep 17 18:19:54 [kernel] with sdb3(584781824) Sep 17 18:19:54 [kernel] raid0: EQUAL Sep 17 18:19:54 [kernel] raid0: FINAL 1 zones Sep 17 18:19:54 [kernel] raid0: done. Sep 17 18:19:54 [kernel] raid0 : md_size is 1169563648 sectors. Sep 17 18:19:54 [kernel] ******* md3 configuration ********* Sep 17 18:19:54 [kernel] zone0=[sda3/sdb3/] Sep 17 18:19:54 [kernel] zone offset=0kb device offset=0kb size=584781824kb Sep 17 18:19:54 [kernel] ********************************** Sep 17 18:19:54 [kernel] md3: detected capacity change from 0 to 598816587776 Sep 17 18:19:54 [kernel] md: considering sdb1 ... Sep 17 18:19:54 [kernel] md: adding sdb1 ... Sep 17 18:19:54 [kernel] md: adding sda1 ... Sep 17 18:19:54 [kernel] md: created md1 Sep 17 18:19:54 [kernel] md: bind Sep 17 18:19:54 [kernel] md: bind Sep 17 18:19:54 [kernel] md: running: Sep 17 18:19:54 [kernel] raid1: raid set md1 active with 2 out of 2 mirrors Sep 17 18:19:54 [kernel] md1: detected capacity change from 0 to 139722752 Sep 17 18:19:54 [kernel] md: ... autorun DONE. Sep 17 18:19:54 [kernel] REISERFS (device md3): using ordered data mode Sep 17 18:19:54 [kernel] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 17 18:19:54 [kernel] REISERFS (device md3): checking transaction log (md3) Sep 17 18:19:54 [kernel] REISERFS (device md3): Using r5 hash to sort names Sep 17 18:19:54 [kernel] VFS: Mounted root (reiserfs filesystem) readonly on device 9:3. Sep 17 18:19:54 [kernel] Freeing unused kernel memory: 360k freed Sep 17 18:19:54 [kernel] udev: starting version 145 Sep 17 18:19:54 [kernel] md4: unknown partition table Sep 17 18:19:54 [kernel] md1: Sep 17 18:19:54 [kernel] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 17 18:19:54 [kernel] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0300b1) Sep 17 18:19:54 [kernel] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 Sep 17 18:19:54 [kernel] unknown partition table Sep 17 18:19:54 [kernel] REISERFS (device md4): found reiserfs format "3.6" with standard journal Sep 17 18:19:54 [kernel] REISERFS (device md4): using ordered data mode Sep 17 18:19:54 [kernel] REISERFS (device md4): journal params: device md4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 17 18:19:54 [kernel] REISERFS (device md4): checking transaction log (md4) Sep 17 18:19:54 [kernel] REISERFS (device md4): Using r5 hash to sort names Sep 17 18:19:54 [kernel] Adding 506036k swap on /dev/sda2. Priority:-1 extents:1 across:506036k Sep 17 18:19:54 [kernel] Adding 506036k swap on /dev/sdb2. Priority:-2 extents:1 across:506036k Sep 17 18:19:54 [acpid] 1 rule loaded_ Sep 17 18:19:54 [acpid] waiting for events: event logging is off_ Sep 17 18:19:55 [acpid] client connected from 1695[103:409]_ Sep 17 18:19:55 [acpid] 1 client rule loaded_ Sep 17 18:19:55 [kernel] skge eth0: enabling interface Sep 17 18:19:55 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 17 18:19:58 [kernel] skge eth0: Link is up at 1000 Mbps, full duplex, flow control both Sep 17 18:19:58 [kernel] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sep 17 18:20:10 [ntpdate] step time server 85.17.207.62 offset -0.027568 sec Sep 17 18:20:11 [sshd] Server listening on 0.0.0.0 port 22. Sep 17 18:20:11 [sshd] Server listening on :: port 22. Sep 17 18:20:18 [login] pam_unix(login:session): session opened for user root by LOGIN(uid=0) Sep 17 18:20:18 [login] ROOT LOGIN on '/dev/tty1' Sep 17 18:20:45 [kernel] [drm] Module unloaded Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0300b1) Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: ... appears to be valid Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: BIT BIOS found Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Bios version 62.00.59.00 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00020030 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c023 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD113 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA39: Init table command not found: 0x87 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA5C: Init table command not found: 0x87 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA16: Init table command not found: 0x87 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA7F: Init table command not found: 0x87 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD53E Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9DB Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAB8 Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB8A Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEBEF Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: 0xEBEF: Condition still not met after 0ms, skiping following opcodes Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: 0xC0A4: parsing output script 0 - Last output repeated twice - Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: 0xA642: parsing output script 0 Sep 17 18:20:54 [kernel] [TTM] Zone kernel: Available graphics memory: 451562 kiB. Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: Allocating FIFO number 1 Sep 17 18:20:54 [kernel] BUG: unable to handle kernel NULL pointer dereference at 00000003 Sep 17 18:20:54 [kernel] IP: [] kmem_cache_alloc+0x41/0xb0 Sep 17 18:20:54 [kernel] *pde = 00000000 Sep 17 18:20:54 [kernel] Modules linked in: nouveau(+) ttm drm_kms_helper cfbcopyarea cfbimgblt cfbfillrect [last unloaded: nouveau] Sep 17 18:20:54 [kernel] Pid: 1845, comm: modprobe Not tainted (2.6.31-rc8-ge3ac207 #39) P5E64 WS EVOLUTION Sep 17 18:20:54 [kernel] EIP: 0060:[] EFLAGS: 00010006 CPU: 3 Sep 17 18:20:54 [kernel] EIP is at kmem_cache_alloc+0x41/0xb0 Sep 17 18:20:54 [kernel] EAX: 00000000 EBX: 00000003 ECX: c11b68f5 EDX: c1c547d0 Sep 17 18:20:54 [kernel] ESI: 00000202 EDI: 000080d0 EBP: c1424be4 ESP: f545dd30 Sep 17 18:20:54 [kernel] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Sep 17 18:20:54 [kernel] 00000000 00010000 00000060 00000000 00010000 f7276000 f545ddb4 c11b68f5 Sep 17 18:20:54 [kernel] <0> 00000000 00000000 f56ef800 f7276000 fb6883d5 00000000 00000004 00000000 Sep 17 18:20:54 [kernel] <0> 00000000 00000000 00000001 f545ddb4 00001000 00000000 f56eff00 f7276000 Sep 17 18:20:54 [kernel] [] ? drm_gem_object_alloc+0x25/0xc0 Sep 17 18:20:54 [kernel] [] ? nouveau_gem_new+0x85/0xd0 [nouveau] Sep 17 18:20:54 [kernel] [] ? nouveau_notifier_init_channel+0x60/0x100 [nouveau] Sep 17 18:20:54 [kernel] [] ? nouveau_channel_alloc+0x1e1/0x7d0 [nouveau] Sep 17 18:20:54 [kernel] [] ? __kmalloc+0x25/0x100 Sep 17 18:20:54 [kernel] [] ? nouveau_card_init+0x4eb/0xb80 [nouveau] Sep 17 18:20:54 [kernel] [] ? drm_get_dev+0x2a1/0x440 Sep 17 18:20:54 [kernel] [] ? local_pci_probe+0xb/0x10 Sep 17 18:20:54 [kernel] [] ? pci_device_probe+0x69/0x90 Sep 17 18:20:54 [kernel] [] ? driver_probe_device+0x7d/0x180 Sep 17 18:20:54 [kernel] [] ? pci_match_device+0xb0/0xd0 Sep 17 18:20:54 [kernel] [] ? __driver_attach+0x79/0x80 Sep 17 18:20:54 [kernel] [] ? pci_device_remove+0x0/0x40 Sep 17 18:20:54 [kernel] [] ? bus_for_each_dev+0x49/0x70 Sep 17 18:20:54 [kernel] [] ? pci_device_remove+0x0/0x40 Sep 17 18:20:54 [kernel] [] ? driver_attach+0x16/0x20 Sep 17 18:20:54 [kernel] [] ? __driver_attach+0x0/0x80 Sep 17 18:20:54 [kernel] [] ? bus_add_driver+0xaf/0x220 Sep 17 18:20:54 [kernel] [] ? pci_device_remove+0x0/0x40 Sep 17 18:20:54 [kernel] [] ? driver_register+0x67/0x150 Sep 17 18:20:54 [kernel] [] ? drm_init+0x2d/0xe0 Sep 17 18:20:54 [kernel] [] ? __pci_register_driver+0x3d/0xb0 Sep 17 18:20:54 [kernel] [] ? nouveau_init+0x0/0x3c [nouveau] Sep 17 18:20:54 [kernel] [] ? do_one_initcall+0x2e/0x190 Sep 17 18:20:54 [kernel] [] ? sys_init_module+0xb3/0x1f0 Sep 17 18:20:54 [kernel] [] ? sys_read+0x41/0x80 Sep 17 18:20:54 [kernel] [] ? sysenter_do_call+0x12/0x26 Sep 17 18:20:54 [kernel] ---[ end trace 9df2d5b9d9112ef2 ]--- Sep 17 18:21:05 [shutdown] shutting down for system reboot