Linux version 2.6.31-rc9-00614-g4e9caac-dirty (prg@carbon) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #14 Sun Oct 4 06:31:23 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable) BIOS-e820: 000000001fdf0000 - 000000001fdfb000 (ACPI data) BIOS-e820: 000000001fdfb000 - 000000001fe00000 (ACPI NVS) BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x1fdf0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 01FE00000 mask FFFE00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000001fdf0000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001fdf0000 page 4k kernel direct mapping tables up to 1fdf0000 @ 10000-15000 ACPI: RSDP 000f7ae0 00014 (v00 SONY ) ACPI: RSDT 1fdf6d58 0002C (v01 SONY F0 20040119 PTL 00000000) ACPI: FACP 1fdfaf3c 00074 (v01 SONY F0 20040119 PTL 01000000) ACPI: DSDT 1fdf6d84 041B8 (v01 SONY F0 20040119 PTL 0100000E) ACPI: FACS 1fdfbfc0 00040 ACPI: APIC 1fdfafb0 00050 (v01 SONY F0 20040119 PTL 00000000) 509MB LOWMEM available. mapped low ram: 0 - 1fdf0000 low ram: 0 - 1fdf0000 node 0 low ram: 00000000 - 1fdf0000 node 0 bootmap 00011000 - 00014fc0 (6 early reservations) ==> bootmem [0000000000 - 001fdf0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 000147f878] TEXT DATA BSS ==> [0001000000 - 000147f878] #2 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #3 [0001480000 - 00014860f0] BRK ==> [0001480000 - 00014860f0] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0001fdf0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0001fdf0 On node 0 totalpages: 130431 free_area_init_node: node 0, pgdat c13b1000, node_mem_map c1487200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 988 pages used for memmap Normal zone: 125460 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129411 Kernel command line: root=/dev/hda3 ro PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 512440k/522176k available (2849k kernel code, 9136k reserved, 949k data, 260k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) vmalloc : 0xe05f0000 - 0xfffe3000 ( 505 MB) lowmem : 0xc0000000 - 0xdfdf0000 ( 509 MB) .init : 0xc13b6000 - 0xc13f7000 ( 260 kB) .data : 0xc12c84d1 - 0xc13b5cc8 ( 949 kB) .text : 0xc1000000 - 0xc12c84d1 (2849 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. NR_IRQS:16 Fast TSC calibration using PIT Detected 2806.531 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.06 BogoMIPS (lpj=2806531) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K mce: CPU supports 4 MCE banks Performance Counters: no PMU driver, software counters only. CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ACPI: setting ELCR to 0200 (from 0e00) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd996, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x15, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff] pci 0000:00:02.0: Enabling SiS 96x SMBus pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f] pci 0000:00:02.5: reg 20 io port: [0x1000-0x100f] pci 0000:00:02.6: reg 10 io port: [0x1800-0x18ff] pci 0000:00:02.6: reg 14 io port: [0x1400-0x147f] pci 0000:00:02.6: supports D1 D2 pci 0000:00:02.6: PME# supported from D3hot D3cold pci 0000:00:02.6: PME# disabled pci 0000:00:02.7: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:02.7: reg 14 io port: [0x1480-0x14ff] pci 0000:00:02.7: supports D1 D2 pci 0000:00:02.7: PME# supported from D3hot D3cold pci 0000:00:02.7: PME# disabled pci 0000:00:03.0: reg 10 32bit mmio: [0xd4000000-0xd4000fff] pci 0000:00:03.1: reg 10 32bit mmio: [0xd4001000-0xd4001fff] pci 0000:00:03.2: reg 10 32bit mmio: [0xd4002000-0xd4002fff] pci 0000:00:03.3: reg 10 32bit mmio: [0xd4003000-0xd4003fff] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold pci 0000:00:03.3: PME# disabled pci 0000:00:04.0: reg 10 io port: [0x2000-0x20ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xd4004000-0xd4004fff] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0a.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:0a.1: supports D1 D2 pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0a.2: reg 10 32bit mmio: [0xd4005000-0xd40057ff] pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold pci 0000:00:0a.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd5000000-0xd5ffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xd5000000-0xd5ffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:04: ioport range 0x8000-0x808f has been reserved system 00:04: ioport range 0x8090-0x80ff has been reserved system 00:04: ioport range 0x8100-0x811f has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0x600-0x60f has been reserved system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved system 00:04: iomem range 0xffe80000-0xffefffff has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xd5000000-0xd5ffffff pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0x002400-0x0024ff pci 0000:00:0a.0: IO window: 0x002800-0x0028ff pci 0000:00:0a.0: PREFETCH window: 0x20000000-0x23ffffff pci 0000:00:0a.0: MEM window: 0x24000000-0x27ffffff pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06 pci 0000:00:0a.1: IO window: 0x002c00-0x002cff pci 0000:00:0a.1: IO window: 0x003000-0x0030ff pci 0000:00:0a.1: PREFETCH window: 0x28000000-0x2bffffff pci 0000:00:0a.1: MEM window: 0x2c000000-0x2fffffff pci 0000:00:0a.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:0a.1: enabling device (0000 -> 0003) pci 0000:00:0a.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xd5000000-0xd5ffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:02: resource 0 io: [0x2400-0x24ff] pci_bus 0000:02: resource 1 io: [0x2800-0x28ff] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff] pci_bus 0000:06: resource 0 io: [0x2c00-0x2cff] pci_bus 0000:06: resource 1 io: [0x3000-0x30ff] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 JFS: nTxBlock = 4004, nTxLock = 32036 SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 1001 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device ACPI: AC Adapter [ACAD] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C2]) processor LNXCPU:00: registered as cooling_device0 Switched to high resolution mode on CPU 0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [ATF0] (76 C) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) Real Time Clock Driver v1.12b Linux agpgart interface v0.103 loop: module loaded Uniform Multi-Platform E-IDE driver sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x00) sis5513 0000:00:02.5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007 ide1: BM-DMA at 0x1008-0x100f Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: SONY DVD RW DW-U50A, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 512KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 ide-cd driver 5.00 ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache Uniform CD-ROM driver Revision: 3.20 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input3 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4 XFS mounting filesystem hda3 Ending clean XFS mount for filesystem: hda3 VFS: Mounted root (xfs filesystem) readonly on device 3:3. Freeing unused kernel memory: 260k freed Write protecting the kernel text: 2852k Write protecting the kernel read-only data: 784k udev: starting version 141 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb agpgart-sis 0000:00:00.0: SiS chipset [1039/0648] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 9, io mem 0xd4000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ohci_hcd usb usb1: SerialNumber: 0000:00:03.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 11, io mem 0xd4001000 sis900.c: v1.08.10 Apr. 2 2006 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ohci_hcd usb usb2: SerialNumber: 0000:00:03.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 11, 08:00:46:aa:97:85 ohci_hcd 0000:00:03.2: enabling device (0010 -> 0012) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.2: irq 10, io mem 0xd4002000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ohci_hcd usb usb3: SerialNumber: 0000:00:03.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:03.3: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:03.3: cache line size of 128 is not supported ehci_hcd 0000:00:03.3: irq 10, io mem 0xd4003000 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ehci_hcd usb usb4: SerialNumber: 0000:00:03.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected yenta_cardbus 0000:00:0a.0: CardBus bridge found [104d:814e] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0038, PCI irq 11 yenta_cardbus 0000:00:0a.0: Socket status: 30000820 yenta_cardbus 0000:00:0a.1: CardBus bridge found [104d:814e] yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0038, PCI irq 11 yenta_cardbus 0000:00:0a.1: Socket status: 30000006 Intel ICH Modem 0000:00:02.6: enabling device (0000 -> 0001) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 Intel ICH Modem 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 MC'97 1 converters and GPIO not ready (0xff00) Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 usb 3-2: new full speed USB device using ohci_hcd and address 2 usb 3-2: New USB device found, idVendor=054c, idProduct=0069 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Memory Stick Slot usb 3-2: Manufacturer: Sony usb 3-2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 pci 0000:02:00.0: reg 10 32bit mmio: [0xffffe000-0xffffffff] cfg80211: Calling CRDA to update world regulatory domain rt2500pci 0000:02:00.0: enabling device (0000 -> 0002) rt2500pci 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 rt2500pci 0000:02:00.0: setting latency timer to 64 phy0: Selected rate control algorithm 'minstrel' intel8x0_measure_ac97_clock: measured 50504 usecs (2430 samples) intel8x0: clocking to 48000 kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 524280k swap on /mnt/u/var/swap. Priority:-1 extents:2303 across:1095292k Adding 524280k swap on /mnt/u/var/swap2. Priority:-2 extents:1009 across:1898268k scsi 0:0:0:0: Direct-Access Sony MSC-U03 2.00 PQ: 0 ANSI: 0 CCS usb-storage: device scan complete sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 eth0: Media Link Off hdc: UDMA/33 mode selected wlan0: authenticate with AP 00:14:bf:a2:63:f9 wlan0: authenticated wlan0: associate with AP 00:14:bf:a2:63:f9 wlan0: RX AssocResp from 00:14:bf:a2:63:f9 (capab=0x411 status=0 aid=1) wlan0: associated [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031a00a1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... BIOS signature not found [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BMP BIOS found [drm] nouveau 0000:01:00.0: BMP version 5.39 [drm] nouveau 0000:01:00.0: Bios version 04.31.20.37 [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000005 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00009c40 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02010321 00000703 [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE4A0 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE7F2 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE955 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAC5 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAE2 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xEAFF [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xECEB [drm] nouveau 0000:01:00.0: BIOS FP mode: 1024x768 (65000kHz pixel clock) [TTM] Zone kernel: Available graphics memory: 256424 kiB. agpgart-sis 0000:00:00.0: AGP 3.0 bridge agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:01:00.0: Detected a LVDS connector [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a TV connector [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo dc81b680 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0) [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [drm] nouveau 0000:01:00.0: 0xD8AD: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [drm] nouveau 0000:01:00.0: vpll: n1 53 n2 4 m1 11 m2 1 log2p 3 [drm] LVDS-7: set mode 1024x768 23 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0 [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [drm] nouveau 0000:01:00.0: 0xD9DB: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0) [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [drm] nouveau 0000:01:00.0: 0xD896: Parsing digital output script table [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 Console: switching to colour frame buffer device 128x48 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2