Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffe7600 (usable) BIOS-e820: 000000003ffe7600 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x3ffe7 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E7FFF write-protect E8000-EFFFF write-back F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 0FEDA0000 mask FFFFE0000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000040000000 - 00000000feda0000 (usable) ==> (reserved) e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e8000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000003ffe7600 (usable) modified: 000000003ffe7600 - 0000000040000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 2ff7e000 - 3002cdb9 ACPI: RSDP 000e9e10 00014 (v00 COMPAQ) ACPI: RSDT 3fff7640 00034 (v01 COMPAQ CPQ0063 20040826 00000000) ACPI: FACP 3fff76ec 00074 (v01 COMPAQ CANTERW 00000001 00000000) ACPI: DSDT 3fff77fc 00D7D (v01 COMPAQ DSDT 00000001 MSFT 0100000E) ACPI: FACS 3fff7600 00040 ACPI: SSDT 3fff8579 02036 (v01 COMPAQ PROJECT 00000001 MSFT 0100000E) ACPI: APIC 3fff7760 00068 (v01 COMPAQ CANTERW 00000001 00000000) ACPI: ASF! 3fff77c8 00034 (v16 COMPAQ CANTERW 00000001 00000000) ACPI: Local APIC address 0xfee00000 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44] #4 [002ff7e000 - 003002cdb9] RAMDISK ==> [002ff7e000 - 003002cdb9] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [000156e000 - 00015740ef] BRK ==> [000156e000 - 00015740ef] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f8d90] f8d90 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003ffe7 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0003ffe7 On node 0 totalpages: 262018 free_area_init_node: node 0, pgdat c141b720, node_mem_map c1575000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3963 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34521 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259970 Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2 ro PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003ffe7) Memory: 1032148k/1048476k available (3110k kernel code, 15432k reserved, 1121k data, 416k init, 139172k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1422000 - 0xc148a000 ( 416 kB) .data : 0xc1309a2d - 0xc1421e68 (1121 kB) .text : 0xc1000000 - 0xc1309a2d (3110 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 NR_IRQS:512 Fast TSC calibration using PIT Detected 2992.626 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 5987.63 BogoMIPS (lpj=9975420) Security Framework initialized Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Counters: no PMU driver, software counters only. Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5986.90 BogoMIPS (lpj=9974251) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks CPU1: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (11974.54 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.20 entry at 0xec277, last bus=5 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20 io port: [0x1440-0x145f] pci 0000:00:1d.1: reg 20 io port: [0x1460-0x147f] pci 0000:00:1d.2: reg 20 io port: [0x1480-0x149f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0500000-0xf05003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: Enabled i801 SMBus device pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x14e0-0x14e7] pci 0000:00:1f.1: reg 14 io port: [0x1800-0x1803] pci 0000:00:1f.1: reg 18 io port: [0x14e8-0x14ef] pci 0000:00:1f.1: reg 1c io port: [0x1804-0x1807] pci 0000:00:1f.1: reg 20 io port: [0x14c0-0x14cf] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.2: reg 10 io port: [0x14f0-0x14f7] pci 0000:00:1f.2: reg 14 io port: [0x1808-0x180b] pci 0000:00:1f.2: reg 18 io port: [0x14f8-0x14ff] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f] pci 0000:00:1f.2: reg 20 io port: [0x14d0-0x14df] pci 0000:00:1f.3: reg 20 io port: [0xfc00-0xfc1f] pci 0000:00:1f.5: reg 10 io port: [0x1000-0x10ff] pci 0000:00:1f.5: reg 14 io port: [0x1400-0x143f] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0500400-0xf05005ff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0500600-0xf05006ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xf1000000-0xf1ffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xf1000000-0xf21fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xf01fffff] pci 0000:05:02.0: reg 10 64bit mmio: [0xf0400000-0xf040ffff] pci 0000:05:02.0: PME# supported from D3hot D3cold pci 0000:05:02.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xf0200000-0xf04fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 14 15) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0d: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling pnp 00:0d: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling pnp 00:0d: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling pnp 00:0d: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0d: ioport range 0x400-0x41f has been reserved system 00:0d: ioport range 0x420-0x43f has been reserved system 00:0d: ioport range 0x440-0x45f has been reserved system 00:0d: ioport range 0x460-0x47f has been reserved system 00:0d: ioport range 0xfa00-0xfa3f has been reserved system 00:0d: ioport range 0xfc00-0xfc7f could not be reserved system 00:0d: ioport range 0xfc80-0xfcff has been reserved system 00:0d: ioport range 0xfe00-0xfe7f has been reserved system 00:0d: ioport range 0xfe80-0xfeff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved system 00:0e: iomem range 0x40000000-0x400fffff has been reserved system 00:0e: iomem range 0xe8000-0xfffff could not be reserved system 00:0e: iomem range 0xfec01000-0xffffffff could not be reserved system 00:0e: iomem range 0xcfc00-0xe7fff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xf1000000-0xf21fffff pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xf01fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xf0200000-0xf04fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xf1000000-0xf21fffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf01fffff] pci_bus 0000:05: resource 1 mem: [0xf0200000-0xf04fffff] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 699k freed apm: BIOS not found. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1257762214.463:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1746 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 416k freed SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007) pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:1f.1: setting latency timer to 64 pata_acpi 0000:00:1f.1: PCI INT A disabled pata_acpi 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:1f.2: setting latency timer to 64 pata_acpi 0000:00:1f.2: PCI INT A disabled ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14c0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14c8 irq 15 ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x14f0 ctl 0x1808 bmdma 0x14d0 irq 18 ata4: SATA max UDMA/133 cmd 0x14f8 ctl 0x180c bmdma 0x14d8 irq 18 ata2.00: ATAPI: LITE-ON COMBO SOHC-5236V, R$0C, max UDMA/44 ata2.00: configured for UDMA/44 scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-5236V R$0C PQ: 0 ANSI: 5 ata3.00: ATA-6: ST3200822AS, 3.02, max UDMA/100 ata3.00: 390721968 sectors, multi 16: LBA48 ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA ST3200822AS 3.02 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 2:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda2): barriers enabled kjournald2 starting: pid 455, dev sda2:8, commit interval 5 seconds EXT4-fs (sda2): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda2): mounted filesystem with ordered data mode rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs udev: starting version 146 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0500000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel i875 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. usb 1-1: new high speed USB device using ehci_hcd and address 2 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001440 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001460 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001480 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected scsi 1:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PBTN] usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 2 ports detected processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) EDAC MC: Ver: 2.1.0 Oct 23 2009 tg3.c:v3.99 (April 20, 2009) tg3 0000:05:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 tg3 0000:05:02.0: PME# disabled parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected lp: driver loaded but no devices found eth0: Tigon3 [partno(BCM95782A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:11:0a:00:40:e9 eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] lp0: using parport0 (interrupt-driven). Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 usb 1-1.1: new low speed USB device using ehci_hcd and address 3 usb 1-1.1: configuration #1 chosen from 1 choice ppdev: user-space parallel port driver usb 1-1.2: new low speed USB device using ehci_hcd and address 4 usb 1-1.2: configuration #1 chosen from 1 choice intel8x0_measure_ac97_clock: measured 50792 usecs (2448 samples) intel8x0: clocking to 48000 EDAC i82875p: i82875p init one EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0 EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [drm] Initialized drm 1.1.0 20060810 usbcore: registered new interface driver hiddev input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input3 generic-usb 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.7-1.1/input0 input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.7-1.2/input0 input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 generic-usb 0003:04D9:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.7-1.2/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nouveau 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031400a1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BMP BIOS found [drm] nouveau 0000:01:00.0: BMP version 5.40 [drm] nouveau 0000:01:00.0: Bios version 04.31.20.69 [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 03010312 00000000 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000733 [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF15F [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF4BE [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF621 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF79D [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF7BA [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF7D7 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xFA0D [TTM] Zone kernel: Available graphics memory: 447290 kiB. [TTM] Zone highmem: Available graphics memory: 516876 kiB. [drm] nouveau 0000:01:00.0: 128 MiB VRAM agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [drm] nouveau 0000:01:00.0: 256 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [drm] nouveau 0000:01:00.0: Detected a TV connector [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo efc83f00 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [drm] nouveau 0000:01:00.0: vpll: n1 4 n2 4 m1 1 m2 1 log2p 2 [drm] TMDS-9: set mode 1280x1024 37 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 2 [drm] nouveau 0000:01:00.0: 0xE513: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [drm] nouveau 0000:01:00.0: vpll: n1 16 n2 5 m1 3 m2 1 log2p 3 [drm] TV-10: set mode 720x576 38 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B Console: switching to colour frame buffer device 90x36 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 EXT4-fs (sda2): internal journal on sda2:8 REISERFS (device sda3): found reiserfs format "3.6" with standard journal REISERFS (device sda3): using ordered data mode REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda3): checking transaction log (sda3) REISERFS (device sda3): Using r5 hash to sort names Adding 1118840k swap on /dev/sda1. Priority:-1 extents:1 across:1118840k tg3 0000:05:02.0: firmware: requesting tigon/tg3_tso5.bin tg3 0000:05:02.0: PME# disabled tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [drm] nouveau 0000:01:00.0: vpll: n1 4 n2 4 m1 1 m2 1 log2p 2 [drm] TMDS-9: set mode 1024x768 39 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 2 [drm] nouveau 0000:01:00.0: 0xE513: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [drm] nouveau 0000:01:00.0: vpll: n1 16 n2 5 m1 3 m2 1 log2p 3 [drm] TV-10: set mode 1024x768 3a [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present