Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009 Command line: initrd=initrd0.img root=live:CDLABEL=Fedora-12-x86_64-Live rootfstype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD noiswmd nouveau.modeset=1 BOOT_IMAGE=vmlinuz0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe80000 (usable) BIOS-e820: 000000003fe80000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3fe80 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03FF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 1023MB, range: 1MB, type UC total RAM coverred: 1023M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 1023MB, range: 1MB, type UC x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000003fe80000 0000000000 - 003fe00000 page 2M 003fe00000 - 003fe80000 page 4k kernel direct mapping tables up to 3fe80000 @ 8000-b000 RAMDISK: 3f392000 - 3fe5e06e ACPI: RSDP 00000000000f6820 00014 (v00 PTLTD ) ACPI: RSDT 000000003fe8f5d2 00044 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) ACPI: FACP 000000003fe99caa 00074 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) ACPI: DSDT 000000003fe8ff98 09D12 (v01 INTEL CALISTGA 06040000 MSFT 02000002) ACPI: FACS 000000003fe9afc0 00040 ACPI: APIC 000000003fe99d1e 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) ACPI: HPET 000000003fe99d86 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) ACPI: MCFG 000000003fe99dbe 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A) ACPI: APIC 000000003fe99dfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: BOOT 000000003fe99e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 000000003fe99e8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000) ACPI: SSDT 000000003fe8f616 004F6 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000003fe80000 Bootmem setup node 0 0000000000000000-000000003fe80000 NODE_DATA [0000000000009000 - 000000000001efff] bootmap [000000000001f000 - 0000000000026fcf] pages 8 (7 early reservations) ==> bootmem [0000000000 - 003fe80000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00019adb00] TEXT DATA BSS ==> [0001000000 - 00019adb00] #3 [003f392000 - 003fe5e06e] RAMDISK ==> [003f392000 - 003fe5e06e] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [00019ae000 - 00019ae178] BRK ==> [00019ae000 - 00019ae178] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f6850] f6850 [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003fe80 On node 0 totalpages: 261663 DMA zone: 56 pages used for memmap DMA zone: 100 pages reserved DMA zone: 3843 pages, LIFO batch:0 DMA32 zone: 3523 pages used for memmap DMA32 zone: 254141 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 29 pages at ffff8800019b9000, static data 90080 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 257984 Policy zone: DMA32 Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-12-x86_64-Live rootfstype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD noiswmd nouveau.modeset=1 BOOT_IMAGE=vmlinuz0 Unknown boot option `nouveau.modeset=1': ignoring PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 1010900k/1047040k available (4227k kernel code, 388k absent, 35752k reserved, 2926k data, 1324k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 Fast TSC calibration using PIT Detected 1666.684 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled allocated 10485760 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.36 BogoMIPS (lpj=1666684) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20852 entries in 82 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3333.50 BogoMIPS (lpj=1666753) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6666.87 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=776 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=6008 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 12:04:39 Date: 11/22/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE storm detected, transactions will use polling mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: ACPI Dock Station Driver: 2 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2500000-0xd2503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2504000-0xd25043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: bridge io port: [0x00-0xfff] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0x000000-0x00ffff] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x00-0xfff] pci 0000:00:1c.1: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:00:1c.2: bridge io port: [0x00-0xfff] pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:00:1c.3: bridge io port: [0x00-0xfff] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:0a:09.0: reg 10 32bit mmio: [0xd2206000-0xd2206fff] pci 0000:0a:09.0: supports D1 D2 pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:09.0: PME# disabled pci 0000:0a:09.2: reg 10 32bit mmio: [0xd2207000-0xd22077ff] pci 0000:0a:09.2: reg 14 32bit mmio: [0xd2200000-0xd2203fff] pci 0000:0a:09.2: supports D1 D2 pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot pci 0000:0a:09.2: PME# disabled pci 0000:0a:09.3: reg 10 32bit mmio: [0xd2204000-0xd2205fff] pci 0000:0a:09.3: supports D1 D2 pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot pci 0000:0a:09.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xd2200000-0xd22fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes pci 0000:00:1c.0: BAR 13: can't allocate resource pci 0000:00:1c.0: BAR 14: can't allocate resource pci 0000:00:1c.0: BAR 15: can't allocate resource pci 0000:00:1c.1: BAR 13: can't allocate resource pci 0000:00:1c.1: BAR 14: can't allocate resource pci 0000:00:1c.1: BAR 15: can't allocate resource pci 0000:00:1c.2: BAR 13: can't allocate resource pci 0000:00:1c.2: BAR 14: can't allocate resource pci 0000:00:1c.2: BAR 15: can't allocate resource pci 0000:00:1c.3: BAR 13: can't allocate resource pci 0000:00:1c.3: BAR 14: can't allocate resource pci 0000:00:1c.3: BAR 15: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved system 00:05: ioport range 0x800-0x80f has been reserved system 00:05: ioport range 0x1000-0x107f has been reserved system 00:05: ioport range 0x1180-0x11bf has been reserved system 00:05: ioport range 0x1600-0x166f has been reserved system 00:05: ioport range 0xfe10-0xfe11 has been reserved system 00:05: ioport range 0xfe00-0xfe00 has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0x44000000-0x440fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0x44100000-0x441fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:0a:09.0: CardBus bridge, secondary bus 0000:0b pci 0000:0a:09.0: IO window: 0x002000-0x0020ff pci 0000:0a:09.0: IO window: 0x002400-0x0024ff pci 0000:0a:09.0: PREFETCH window: 0x40000000-0x43ffffff pci 0000:0a:09.0: MEM window: 0x48000000-0x4bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xd2200000-0xd22fffff pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0000 -> 0002) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: enabling device (0000 -> 0002) alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0004 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 pci 0000:0a:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] pci_bus 0000:02: resource 1 mem: [0x44000000-0x440fffff] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] pci_bus 0000:03: resource 0 mem: [0x0-0xfff] pci_bus 0000:03: resource 1 mem: [0x44100000-0x441fffff] pci_bus 0000:03: resource 2 mem: [0x0-0xfffff] pci_bus 0000:04: resource 0 mem: [0x0-0xfff] pci_bus 0000:04: resource 1 mem: [0x0-0xfffff] pci_bus 0000:04: resource 2 mem: [0x0-0xfffff] pci_bus 0000:07: resource 0 mem: [0x0-0xfff] pci_bus 0000:07: resource 1 mem: [0x0-0xfffff] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff] pci_bus 0000:0a: resource 0 io: [0x2000-0x2fff] pci_bus 0000:0a: resource 1 mem: [0xd2200000-0xd22fffff] pci_bus 0000:0a: resource 2 pref mem [0x40000000-0x43ffffff] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:0b: resource 0 io: [0x2000-0x20ff] pci_bus 0000:0b: resource 1 io: [0x2400-0x24ff] pci_bus 0000:0b: resource 2 pref mem [0x40000000-0x43ffffff] pci_bus 0000:0b: resource 3 mem: [0x48000000-0x4bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11056k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1258891480.174:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1996 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1-1] registered ACPI: AC Adapter [ACAD] (off-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] ACPI: SSDT 000000003fe8fd61 001A3 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 000000003fe8fb0c 001D0 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 000000003fe8ff04 00094 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 000000003fe8fcdc 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (69 C) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ata2: port disabled. ignoring. alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2504000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (8180 buckets, 32720 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 1:469:77 rtc_cmos 00:06: setting system clock to 2009-11-22 12:04:41 UTC (1258891481) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata1.00: ATA-7: Hitachi HTS541212H9AT00, HP4OA23C, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.01: ATAPI: MATSHITADVD-RAM UJ-85JS, F100, max UDMA/33 ata1.00: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 ata1.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54121 HP4O PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-85JS F100 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy Uniform CD-ROM driver Revision: 3.20 sda: sr 0:0:1:0: Attached scsi CD-ROM sr0 sr 0:0:1:0: Attached scsi generic sg1 type 5 sda1 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 1324k freed Write protecting the kernel read-only data: 6344k dracut: dracut-002-13.4.git8f397a9b.fc12 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: root was live:/dev/disk/by-label/Fedora-12-x86_64-Live, liveroot is now live:CDLABEL=Fedora-12-x86_64-Live Clocksource tsc unstable (delta = -125300570 ns) udev: starting version 145 [drm] Initialized drm 1.1.0 20060810 nouveau 0000:01:00.0: power state changed by ACPI to D0 nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046700a3) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... BIOS signature not found [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 05.72.22.47 [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03005323 00000004 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04026312 00000000 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020323f1 00a0c070 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDC10 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDF14 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE406 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE581 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE6F6 [drm] nouveau 0000:01:00.0: BIOS FP mode: 1024x768 (65000kHz pixel clock) [TTM] Zone kernel: Available graphics memory: 511642 kiB. [drm] nouveau 0000:01:00.0: 128 MiB VRAM [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:01:00.0: Enable TV-Out with tv module option [drm] nouveau 0000:01:00.0: Detected a LVDS connector [drm] nouveau 0000:01:00.0: LVDS present in DCB table, but couldn't determine its native mode. Disabling. [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [drm] nouveau 0000:01:00.0: Saving VGA fonts ------------[ cut here ]------------ WARNING: at drivers/gpu/drm/drm_crtc_helper.c:1031 drm_helper_initial_config+0x46/0x61 [drm_kms_helper]() (Not tainted) Hardware name: TravelMate C210 No connectors reported connected with modes Modules linked in: nouveau(+) ttm drm_kms_helper drm i2c_algo_bit i2c_core Pid: 145, comm: work_for_cpu Not tainted 2.6.31.5-127.fc12.x86_64 #1 Call Trace: [] warn_slowpath_common+0x84/0x9c [] warn_slowpath_fmt+0x41/0x43 [] drm_helper_initial_config+0x46/0x61 [drm_kms_helper] [] nouveau_card_init+0xc56/0xc66 [nouveau] [] nouveau_load+0x3b3/0x3c1 [nouveau] [] drm_get_dev+0x36e/0x46f [drm] [] ? do_work_for_cpu+0x0/0x2a [] nouveau_pci_probe+0x15/0x17 [nouveau] [] local_pci_probe+0x17/0x1b [] do_work_for_cpu+0x18/0x2a [] kthread+0x91/0x99 [] child_rip+0xa/0x20 [] ? kthread+0x0/0x99 [] ? child_rip+0x0/0x20 ---[ end trace 0f0e4123efb902b8 ]--- [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_MD: removing MD RAID activation dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids usb 5-2: new full speed USB device using uhci_hcd and address 2 yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0113] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x64 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) usb 5-2: New USB device found, idVendor=0483, idProduct=2016 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Biometric Coprocessor usb 5-2: Manufacturer: STMicroelectronics usb 5-2: configuration #1 chosen from 1 choice yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20 yenta_cardbus 0000:0a:09.0: Socket status: 30000006 pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge Memory window: 0xd2200000 - 0xd22fffff yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input6 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 ACPI: EC: missing confirmations, switch off interrupt mode. sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current] Info fld=0x52000 sr 0:0:1:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 1343488 Buffer I/O error on device sr0, logical block 167936 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A squashfs: version 4.0 (2009/01/31) Phillip Lougher EXT4-fs (dm-0): barriers enabled kjournald2 starting: pid 363, dev dm-0:8, commit interval 5 seconds EXT4-fs (dm-0): internal journal on dm-0:8 EXT4-fs (dm-0): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/live-rw dracut: Loading SELinux policy type=1404 audit(1258891496.749:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 144734 rules. SELinux: 8192 avtab hash slots, 144734 rules. SELinux: 8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats SELinux: 75 classes, 144734 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev loop2, type squashfs), not configured for labeling SELinux: initialized (dev loop0, type squashfs), not configured for labeling SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1258891498.546:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 ACPI: WMI: Mapper loaded i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x18a0-0x18bf] conflicts with ACPI region SMBI [0x18a0-0x18af] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver intel_rng: FWH not detected tg3.c:v3.99 (April 20, 2009) tg3 0000:03:00.0: enabling device (0000 -> 0002) tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:03:00.0: setting latency timer to 64 tg3 0000:03:00.0: wake-up capability disabled by ACPI tg3 0000:03:00.0: PME# disabled eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:16:36:85:90:0c eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] NET: Registered protocol family 23 parport_pc 00:09: activated parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] acer-wmi: Acer Laptop ACPI-WMI Extras iTCO_vendor_support: vendor-support=0 tifm_7xx1 0000:0a:09.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20 nsc-ircc, chip->init nsc-ircc, Found chip at base=0x04e nsc-ircc, driver loaded (Dag Brattli) nsc_ircc_open(), can't get iobase of 0x2f8 nsc-ircc, Found chip at base=0x04e nsc-ircc, driver loaded (Dag Brattli) nsc_ircc_open(), can't get iobase of 0x2f8 nsc-ircc 00:07: disabled usb 3-1: new full speed USB device using uhci_hcd and address 2 ppdev: user-space parallel port driver usb 3-1: New USB device found, idVendor=0a5c, idProduct=2101 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Acer Module usb 3-1: Manufacturer: Broadcom Corp usb 3-1: configuration #1 chosen from 1 choice acerhdf: Acer Aspire One Fan driver, v.0.5.13 acerhdf: no Aspire One hardware found iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) cfg80211: Calling CRDA to update world regulatory domain firewire_ohci 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 firewire_ohci: Added fw-ohci device 0000:0a:09.2, OHCI version 1.10 firewire_core: created device fw0: GUID 00c09f0000b376b7, S400 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds iwl3945: Copyright(c) 2003-2009 Intel Corporation iwl3945 0000:02:00.0: enabling device (0000 -> 0002) iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwl3945 0000:02:00.0: setting latency timer to 64 iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG alloc irq_desc for 29 on node 0 alloc kstat_irqs on node 0 iwl3945 0000:02:00.0: irq 29 for MSI/MSI-X cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) phy0: Selected rate control algorithm 'iwl-3945-rs' alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x1e/0x0 ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1255: realtek: Enable default setup for auto mode as fallback input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 device-mapper: multipath: version 1.1.0 loaded SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts Adding 4192892k swap on /dev/sda5. Priority:-1 extents:1 across:4192892k SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs microcode: CPU0 sig=0x6f6, pf=0x20, revision=0x48 platform microcode: firmware: requesting intel-ucode/06-0f-06 microcode: CPU1 sig=0x6f6, pf=0x20, revision=0x48 platform microcode: firmware: requesting intel-ucode/06-0f-06 Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0xc7, date = 2007-03-15 microcode: CPU1 updated to revision 0xc7, date = 2007-03-15 Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ttyS1: LSR safety check engaged! Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-2.ucode Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready tg3 0000:03:00.0: wake-up capability disabled by ACPI tg3 0000:03:00.0: PME# disabled alloc irq_desc for 30 on node 0 alloc kstat_irqs on node 0 tg3 0000:03:00.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 CE: hpet increasing min_delta_ns to 15000 nsec tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present usb 3-1: USB disconnect, address 2 btusb_intr_complete: hci0 urb ffff88002b8ba540 failed to resubmit (19) btusb_bulk_complete: hci0 urb ffff88002b8baf00 failed to resubmit (19) btusb_bulk_complete: hci0 urb ffff88002b8ba3c0 failed to resubmit (19) iwl3945 0000:02:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD