[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32 (root@vger) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #1 SMP Fri Dec 4 07:11:41 EST 2009 [ 0.000000] Command line: ro root=/dev/sda2 quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask F00000000 write-back [ 0.000000] 2 base 300000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] modified: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] modified: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000 [ 0.000000] 0100000000 - 0340000000 page 2M [ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000 [ 0.000000] ACPI: RSDP 00000000000fb1a0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bf780000 00044 (v01 111209 RSDT1642 20091112 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 111209 FACP1642 20091112 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 0B66D (v01 A1265 A1265001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 00040 [ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 111209 APIC1642 20091112 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 111209 OEMMCFG 20091112 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 111209 OEMB1642 20091112 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 111209 OEMHPET 20091112 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000bf7980c0 00120 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 111209 OEMOSFR 20091112 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79a420 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000340000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000340000000 [ 0.000000] NODE_DATA [000000000001c000 - 0000000000020fff] [ 0.000000] bootmap [0000000000021000 - 0000000000088fff] pages 68 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0340000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00018ee9e4] TEXT DATA BSS ==> [0001000000 - 00018ee9e4] [ 0.000000] #3 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #4 [00018ef000 - 00018ef294] BRK ==> [00018ef000 - 00018ef294] [ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #6 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880028600000-ffff880032dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00340000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x00340000 [ 0.000000] On node 0 totalpages: 3143438 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 112 pages reserved [ 0.000000] DMA zone: 3814 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31 [ 0.000000] Normal zone: 32256 pages used for memmap [ 0.000000] Normal zone: 2327040 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000 [ 0.000000] PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000 [ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028200000 s83096 r8192 d23400 u131072 [ 0.000000] pcpu-alloc: s83096 r8192 d23400 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096734 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=/dev/sda2 quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 12324472k/13631488k available (4958k kernel code, 1057736k absent, 249280k reserved, 2715k data, 572k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:944 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 3073.426 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6146.85 BogoMIPS (lpj=3073426) [ 0.000018] Security Framework initialized [ 0.000021] SELinux: Initializing. [ 0.000027] SELinux: Starting in permissive mode [ 0.000913] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003758] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004956] Mount-cache hash table entries: 256 [ 0.005075] Initializing cgroup subsys ns [ 0.005079] Initializing cgroup subsys cpuacct [ 0.005083] Initializing cgroup subsys freezer [ 0.005097] CPU: Physical Processor ID: 0 [ 0.005098] CPU: Processor Core ID: 0 [ 0.005100] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005101] CPU: L2 cache: 256K [ 0.005102] CPU: L3 cache: 8192K [ 0.005105] CPU 0/0x0 -> Node 0 [ 0.005107] mce: CPU supports 9 MCE banks [ 0.005119] CPU0: Thermal monitoring enabled (TM1) [ 0.005122] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.005130] using mwait in idle threads. [ 0.005131] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.005135] ... version: 3 [ 0.005136] ... bit width: 48 [ 0.005137] ... generic registers: 4 [ 0.005139] ... value mask: 0000ffffffffffff [ 0.005140] ... max period: 000000007fffffff [ 0.005141] ... fixed-purpose events: 3 [ 0.005142] ... event mask: 000000070000000f [ 0.005156] ACPI: Core revision 20090903 [ 0.041955] Setting APIC routing to flat [ 0.042408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.052405] CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.154256] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.164522] Initializing CPU#1 [ 0.247115] Calibrating delay using timer specific routine.. 8850.72 BogoMIPS (lpj=4425362) [ 0.247123] CPU: Physical Processor ID: 0 [ 0.247124] CPU: Processor Core ID: 1 [ 0.247126] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.247127] CPU: L2 cache: 256K [ 0.247128] CPU: L3 cache: 8192K [ 0.247130] CPU 1/0x2 -> Node 0 [ 0.247143] CPU1: Thermal monitoring enabled (TM1) [ 0.247147] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.247227] CPU1: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.247233] Skipping synchronization checks as TSC is reliable. [ 0.247296] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.257658] Initializing CPU#2 [ 0.318070] Calibrating delay using timer specific routine.. 6146.37 BogoMIPS (lpj=3073185) [ 0.318076] CPU: Physical Processor ID: 0 [ 0.318077] CPU: Processor Core ID: 2 [ 0.318079] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.318080] CPU: L2 cache: 256K [ 0.318081] CPU: L3 cache: 8192K [ 0.318083] CPU 2/0x4 -> Node 0 [ 0.318096] CPU2: Thermal monitoring enabled (TM1) [ 0.318100] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.318189] CPU2: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.318253] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.328615] Initializing CPU#3 [ 0.389026] Calibrating delay using timer specific routine.. 6146.36 BogoMIPS (lpj=3073184) [ 0.389032] CPU: Physical Processor ID: 0 [ 0.389033] CPU: Processor Core ID: 3 [ 0.389035] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.389037] CPU: L2 cache: 256K [ 0.389037] CPU: L3 cache: 8192K [ 0.389039] CPU 3/0x6 -> Node 0 [ 0.389052] CPU3: Thermal monitoring enabled (TM1) [ 0.389055] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.389128] CPU3: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.389192] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.399553] Initializing CPU#4 [ 0.459982] Calibrating delay using timer specific routine.. 6146.36 BogoMIPS (lpj=3073181) [ 0.459988] CPU: Physical Processor ID: 0 [ 0.459989] CPU: Processor Core ID: 0 [ 0.459992] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.459993] CPU: L2 cache: 256K [ 0.459994] CPU: L3 cache: 8192K [ 0.459996] CPU 4/0x1 -> Node 0 [ 0.460007] CPU4: Thermal monitoring enabled (TM1) [ 0.460009] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.460086] CPU4: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.460147] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.475031] Initializing CPU#5 [ 0.534936] Calibrating delay using timer specific routine.. 6146.37 BogoMIPS (lpj=3073186) [ 0.534941] CPU: Physical Processor ID: 0 [ 0.534941] CPU: Processor Core ID: 1 [ 0.534943] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.534944] CPU: L2 cache: 256K [ 0.534945] CPU: L3 cache: 8192K [ 0.534946] CPU 5/0x3 -> Node 0 [ 0.534956] CPU5: Thermal monitoring enabled (TM1) [ 0.534958] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.534980] CPU5: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.535043] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.545400] Initializing CPU#6 [ 0.605892] Calibrating delay using timer specific routine.. 6146.37 BogoMIPS (lpj=3073187) [ 0.605897] CPU: Physical Processor ID: 0 [ 0.605897] CPU: Processor Core ID: 2 [ 0.605899] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.605900] CPU: L2 cache: 256K [ 0.605901] CPU: L3 cache: 8192K [ 0.605902] CPU 6/0x5 -> Node 0 [ 0.605911] CPU6: Thermal monitoring enabled (TM1) [ 0.605914] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.605937] CPU6: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.605996] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.616350] Initializing CPU#7 [ 0.676848] Calibrating delay using timer specific routine.. 6146.37 BogoMIPS (lpj=3073187) [ 0.676852] CPU: Physical Processor ID: 0 [ 0.676853] CPU: Processor Core ID: 3 [ 0.676855] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.676856] CPU: L2 cache: 256K [ 0.676857] CPU: L3 cache: 8192K [ 0.676858] CPU 7/0x7 -> Node 0 [ 0.676867] CPU7: Thermal monitoring enabled (TM1) [ 0.676869] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.676890] CPU7: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.676903] Brought up 8 CPUs [ 0.676905] Total of 8 processors activated (51875.79 BogoMIPS). [ 0.679793] khelper used greatest stack depth: 5808 bytes left [ 0.680038] Time: 12:31:15 Date: 12/13/09 [ 0.680076] NET: Registered protocol family 16 [ 0.680266] ACPI: bus type pci registered [ 0.680336] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.680338] PCI: Not using MMCONFIG. [ 0.680339] PCI: Using configuration type 1 for base access [ 0.683117] bio: create slab at 0 [ 0.683743] ACPI: EC: Look up EC in DSDT [ 0.685591] ACPI: Executed 1 blocks of module-level executable AML code [ 0.717955] ACPI: Interpreter enabled [ 0.717959] ACPI: (supports S0 S1 S3 S4 S5) [ 0.717978] ACPI: Using IOAPIC for interrupt routing [ 0.718022] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.722877] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.727218] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.736361] ACPI: No dock devices found. [ 0.736479] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.736562] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.736565] pci 0000:00:00.0: PME# disabled [ 0.736618] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.736620] pci 0000:00:01.0: PME# disabled [ 0.736672] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.736674] pci 0000:00:03.0: PME# disabled [ 0.736728] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.736730] pci 0000:00:07.0: PME# disabled [ 0.736931] pci 0000:00:1a.0: reg 20 io port: [0x9800-0x981f] [ 0.736989] pci 0000:00:1a.1: reg 20 io port: [0x9880-0x989f] [ 0.737047] pci 0000:00:1a.2: reg 20 io port: [0x9c00-0x9c1f] [ 0.737108] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3bff000-0xf3bff3ff] [ 0.737155] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.737158] pci 0000:00:1a.7: PME# disabled [ 0.737211] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.737214] pci 0000:00:1c.0: PME# disabled [ 0.737265] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.737268] pci 0000:00:1c.1: PME# disabled [ 0.737319] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.737322] pci 0000:00:1c.2: PME# disabled [ 0.737374] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.737377] pci 0000:00:1c.4: PME# disabled [ 0.737429] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.737432] pci 0000:00:1c.5: PME# disabled [ 0.737476] pci 0000:00:1d.0: reg 20 io port: [0x9080-0x909f] [ 0.737533] pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f] [ 0.737591] pci 0000:00:1d.2: reg 20 io port: [0x9480-0x949f] [ 0.737654] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3bfe000-0xf3bfe3ff] [ 0.737701] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.737704] pci 0000:00:1d.7: PME# disabled [ 0.737809] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.737812] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.737815] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.737819] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.737873] pci 0000:00:1f.2: reg 10 io port: [0x8c00-0x8c07] [ 0.737878] pci 0000:00:1f.2: reg 14 io port: [0x8880-0x8883] [ 0.737882] pci 0000:00:1f.2: reg 18 io port: [0x8800-0x8807] [ 0.737887] pci 0000:00:1f.2: reg 1c io port: [0x8480-0x8483] [ 0.737891] pci 0000:00:1f.2: reg 20 io port: [0x8400-0x841f] [ 0.737896] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3bfc000-0xf3bfc7ff] [ 0.737921] pci 0000:00:1f.2: PME# supported from D3hot [ 0.737924] pci 0000:00:1f.2: PME# disabled [ 0.737947] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf3bfd000-0xf3bfd0ff] [ 0.737958] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.738019] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.738026] pci 0000:02:00.0: reg 18 64bit mmio: [0xf3ce0000-0xf3ceffff] [ 0.738030] pci 0000:02:00.0: reg 20 io port: [0xa000-0xa0ff] [ 0.738037] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xf3cc0000-0xf3cdffff] [ 0.738053] pci 0000:02:00.0: supports D1 D2 [ 0.738079] pci 0000:02:00.1: reg 10 64bit mmio: [0xf3cfc000-0xf3cfffff] [ 0.738108] pci 0000:02:00.1: supports D1 D2 [ 0.738133] pci 0000:00:03.0: bridge io port: [0xa000-0xafff] [ 0.738136] pci 0000:00:03.0: bridge 32bit mmio: [0xf3c00000-0xf3cfffff] [ 0.738140] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.738198] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff] [ 0.738249] pci 0000:07:00.0: reg 10 64bit mmio: [0xfbdf0000-0xfbdfffff] [ 0.738263] pci 0000:07:00.0: reg 18 64bit mmio: [0xfba00000-0xfbbfffff] [ 0.738276] pci 0000:07:00.0: reg 20 64bit mmio: [0xf4000000-0xf7ffffff] [ 0.738358] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xfbdfffff] [ 0.738413] pci 0000:06:00.0: reg 10 64bit mmio: [0xf3ffc000-0xf3ffffff] [ 0.738419] pci 0000:06:00.0: reg 18 io port: [0xd800-0xd8ff] [ 0.738443] pci 0000:06:00.0: reg 30 32bit mmio pref: [0xf3fc0000-0xf3fdffff] [ 0.738478] pci 0000:06:00.0: supports D1 D2 [ 0.738479] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738483] pci 0000:06:00.0: PME# disabled [ 0.738518] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 0.738521] pci 0000:00:1c.2: bridge 32bit mmio: [0xf3f00000-0xf3ffffff] [ 0.738564] pci 0000:05:00.0: reg 10 io port: [0xcc00-0xcc07] [ 0.738571] pci 0000:05:00.0: reg 14 io port: [0xc880-0xc883] [ 0.738578] pci 0000:05:00.0: reg 18 io port: [0xc800-0xc807] [ 0.738584] pci 0000:05:00.0: reg 1c io port: [0xc480-0xc483] [ 0.738591] pci 0000:05:00.0: reg 20 io port: [0xc400-0xc40f] [ 0.738598] pci 0000:05:00.0: reg 24 32bit mmio: [0xf3effc00-0xf3efffff] [ 0.738633] pci 0000:05:00.0: supports D1 [ 0.738635] pci 0000:05:00.0: PME# supported from D0 D1 D3hot [ 0.738638] pci 0000:05:00.0: PME# disabled [ 0.738677] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.738680] pci 0000:00:1c.4: bridge 32bit mmio: [0xf3e00000-0xf3efffff] [ 0.738734] pci 0000:04:00.0: reg 10 64bit mmio: [0xf3dfc000-0xf3dfffff] [ 0.738741] pci 0000:04:00.0: reg 18 io port: [0xb800-0xb8ff] [ 0.738764] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xf3dc0000-0xf3ddffff] [ 0.738800] pci 0000:04:00.0: supports D1 D2 [ 0.738801] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738805] pci 0000:04:00.0: PME# disabled [ 0.738840] pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff] [ 0.738842] pci 0000:00:1c.5: bridge 32bit mmio: [0xf3d00000-0xf3dfffff] [ 0.738879] pci 0000:09:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff] [ 0.738885] pci 0000:09:02.0: reg 14 io port: [0xec00-0xec7f] [ 0.738923] pci 0000:09:02.0: supports D2 [ 0.738924] pci 0000:09:02.0: PME# supported from D2 D3hot D3cold [ 0.738927] pci 0000:09:02.0: PME# disabled [ 0.738964] pci 0000:00:1e.0: transparent bridge [ 0.738967] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.738970] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.739004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.739260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.739349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.739395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.739439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.739486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.739531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.739575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 0.739619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 0.739664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 0.761348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.761439] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.761527] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.761620] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.761710] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.761799] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.761895] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.761985] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.762122] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.762125] vgaarb: loaded [ 0.762239] SCSI subsystem initialized [ 0.762334] libata version 3.00 loaded. [ 0.762406] usbcore: registered new interface driver usbfs [ 0.762433] usbcore: registered new interface driver hub [ 0.762465] usbcore: registered new device driver usb [ 0.762625] PCI: Using ACPI for IRQ routing [ 0.762796] NetLabel: Initializing [ 0.762797] NetLabel: domain hash size = 128 [ 0.762798] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.762805] NetLabel: unlabeled traffic allowed by default [ 0.762869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.762872] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.771848] Switching to clocksource tsc [ 0.773211] pnp: PnP ACPI init [ 0.773219] ACPI: bus type pnp registered [ 0.775465] pnp: PnP ACPI: found 15 devices [ 0.775466] ACPI: ACPI bus type pnp unregistered [ 0.775473] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 0.775475] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.775477] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.775478] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.775480] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved [ 0.775482] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved [ 0.775486] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.775490] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.775491] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.775493] system 00:07: ioport range 0x500-0x57f could not be reserved [ 0.775495] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.775497] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.775499] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.775502] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.775506] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.775507] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.775511] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.775514] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.775516] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.775517] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.775519] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved [ 0.775521] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.780441] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.780442] pci 0000:00:01.0: IO window: disabled [ 0.780445] pci 0000:00:01.0: MEM window: disabled [ 0.780447] pci 0000:00:01.0: PREFETCH window: disabled [ 0.780450] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 0.780452] pci 0000:00:03.0: IO window: 0xa000-0xafff [ 0.780455] pci 0000:00:03.0: MEM window: 0xf3c00000-0xf3cfffff [ 0.780458] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.780462] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 0.780463] pci 0000:00:07.0: IO window: disabled [ 0.780466] pci 0000:00:07.0: MEM window: disabled [ 0.780468] pci 0000:00:07.0: PREFETCH window: disabled [ 0.780471] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.780473] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.780476] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc03fffff [ 0.780479] pci 0000:00:1c.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff [ 0.780484] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:07 [ 0.780486] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.780489] pci 0000:00:1c.1: MEM window: 0xf4000000-0xfbdfffff [ 0.780492] pci 0000:00:1c.1: PREFETCH window: 0x000000c0400000-0x000000c05fffff [ 0.780497] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 0.780499] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 0.780502] pci 0000:00:1c.2: MEM window: 0xf3f00000-0xf3ffffff [ 0.780505] pci 0000:00:1c.2: PREFETCH window: 0x000000c0600000-0x000000c07fffff [ 0.780509] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 [ 0.780511] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.780515] pci 0000:00:1c.4: MEM window: 0xf3e00000-0xf3efffff [ 0.780517] pci 0000:00:1c.4: PREFETCH window: 0x000000c0800000-0x000000c09fffff [ 0.780522] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.780524] pci 0000:00:1c.5: IO window: 0xb000-0xbfff [ 0.780527] pci 0000:00:1c.5: MEM window: 0xf3d00000-0xf3dfffff [ 0.780530] pci 0000:00:1c.5: PREFETCH window: 0x000000c0a00000-0x000000c0bfffff [ 0.780535] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.780537] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.780540] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff [ 0.780543] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.780551] pci 0000:00:01.0: setting latency timer to 64 [ 0.780557] pci 0000:00:03.0: setting latency timer to 64 [ 0.780563] pci 0000:00:07.0: setting latency timer to 64 [ 0.780568] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.780571] alloc irq_desc for 17 on node -1 [ 0.780573] alloc kstat_irqs on node -1 [ 0.780579] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.780582] pci 0000:00:1c.0: setting latency timer to 64 [ 0.780587] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.780589] alloc irq_desc for 16 on node -1 [ 0.780590] alloc kstat_irqs on node -1 [ 0.780593] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.780596] pci 0000:00:1c.1: setting latency timer to 64 [ 0.780602] alloc irq_desc for 18 on node -1 [ 0.780603] alloc kstat_irqs on node -1 [ 0.780605] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.780608] pci 0000:00:1c.2: setting latency timer to 64 [ 0.780614] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.780617] pci 0000:00:1c.4: setting latency timer to 64 [ 0.780623] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.780625] pci 0000:00:1c.5: setting latency timer to 64 [ 0.780630] pci 0000:00:1e.0: setting latency timer to 64 [ 0.780633] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.780634] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.780636] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.780637] pci_bus 0000:02: resource 1 mem: [0xf3c00000-0xf3cfffff] [ 0.780639] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.780640] pci_bus 0000:08: resource 0 io: [0x1000-0x1fff] [ 0.780642] pci_bus 0000:08: resource 1 mem: [0xc0000000-0xc03fffff] [ 0.780643] pci_bus 0000:08: resource 2 pref mem [0xf2f00000-0xf2ffffff] [ 0.780645] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff] [ 0.780646] pci_bus 0000:07: resource 1 mem: [0xf4000000-0xfbdfffff] [ 0.780648] pci_bus 0000:07: resource 2 pref mem [0xc0400000-0xc05fffff] [ 0.780649] pci_bus 0000:06: resource 0 io: [0xd000-0xdfff] [ 0.780650] pci_bus 0000:06: resource 1 mem: [0xf3f00000-0xf3ffffff] [ 0.780652] pci_bus 0000:06: resource 2 pref mem [0xc0600000-0xc07fffff] [ 0.780653] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 0.780655] pci_bus 0000:05: resource 1 mem: [0xf3e00000-0xf3efffff] [ 0.780656] pci_bus 0000:05: resource 2 pref mem [0xc0800000-0xc09fffff] [ 0.780658] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.780659] pci_bus 0000:04: resource 1 mem: [0xf3d00000-0xf3dfffff] [ 0.780660] pci_bus 0000:04: resource 2 pref mem [0xc0a00000-0xc0bfffff] [ 0.780662] pci_bus 0000:09: resource 0 io: [0xe000-0xefff] [ 0.780663] pci_bus 0000:09: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.780665] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 0.780666] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.780689] NET: Registered protocol family 2 [ 0.780943] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.781853] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.782969] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.783102] TCP: Hash tables configured (established 524288 bind 65536) [ 0.783104] TCP reno registered [ 0.783210] NET: Registered protocol family 1 [ 0.783349] RPC: Registered udp transport module. [ 0.783350] RPC: Registered tcp transport module. [ 0.783351] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783368] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.783369] pci 0000:00:1a.0: Performing full reset [ 0.783382] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.783384] pci 0000:00:1a.1: Performing full reset [ 0.783397] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.783398] pci 0000:00:1a.2: Performing full reset [ 0.783433] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.783434] pci 0000:00:1d.0: Performing full reset [ 0.783447] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.783448] pci 0000:00:1d.1: Performing full reset [ 0.783461] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.783462] pci 0000:00:1d.2: Performing full reset [ 0.783491] pci 0000:02:00.0: Boot video device [ 0.783557] DMAR: Host address width 39 [ 0.783559] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1 [ 0.783568] IOMMU fbffe000: ver 1:0 cap c90780106f0462 ecap f020fe [ 0.783570] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff [ 0.783572] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff [ 0.783574] DMAR: ATSR flags: 0x0 [ 0.785259] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0xf [ 0.785264] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0xf [ 0.785271] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0xf [ 0.785274] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0xf [ 0.785278] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0xf [ 0.785282] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0xf [ 0.785286] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0xf [ 0.785291] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0xf [ 0.785317] Microcode Update Driver: v2.00 , Peter Oruba [ 0.785318] Scanning for low memory corruption every 60 seconds [ 0.785462] audit: initializing netlink socket (disabled) [ 0.785469] type=2000 audit(1260707474.623:1): initialized [ 0.791667] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.793415] VFS: Disk quotas dquot_6.5.2 [ 0.793486] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.794419] Btrfs loaded [ 0.794425] msgmni has been set to 24071 [ 0.794499] SELinux: Registering netfilter hooks [ 0.794819] alg: No test for stdrng (krng) [ 0.794883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.794885] io scheduler noop registered [ 0.794887] io scheduler anticipatory registered [ 0.794888] io scheduler deadline registered [ 0.794929] io scheduler cfq registered (default) [ 0.795033] alloc irq_desc for 48 on node -1 [ 0.795035] alloc kstat_irqs on node -1 [ 0.795041] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X [ 0.795047] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.795160] alloc irq_desc for 49 on node -1 [ 0.795161] alloc kstat_irqs on node -1 [ 0.795166] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X [ 0.795171] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.795280] alloc irq_desc for 50 on node -1 [ 0.795281] alloc kstat_irqs on node -1 [ 0.795286] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X [ 0.795291] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.795400] alloc irq_desc for 51 on node -1 [ 0.795401] alloc kstat_irqs on node -1 [ 0.795406] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X [ 0.795412] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.795543] alloc irq_desc for 52 on node -1 [ 0.795545] alloc kstat_irqs on node -1 [ 0.795550] pcieport 0000:00:1c.1: irq 52 for MSI/MSI-X [ 0.795555] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.795682] alloc irq_desc for 53 on node -1 [ 0.795683] alloc kstat_irqs on node -1 [ 0.795689] pcieport 0000:00:1c.2: irq 53 for MSI/MSI-X [ 0.795694] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.795821] alloc irq_desc for 54 on node -1 [ 0.795822] alloc kstat_irqs on node -1 [ 0.795827] pcieport 0000:00:1c.4: irq 54 for MSI/MSI-X [ 0.795833] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.795966] alloc irq_desc for 55 on node -1 [ 0.795967] alloc kstat_irqs on node -1 [ 0.795972] pcieport 0000:00:1c.5: irq 55 for MSI/MSI-X [ 0.795978] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.796099] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 0.796103] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 0.796107] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 0.796288] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.796290] ACPI: Power Button [PWRB] [ 0.796334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.796336] ACPI: Power Button [PWRF] [ 0.797309] ACPI: SSDT 00000000bf7981e0 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.797650] processor LNXCPU:00: registered as cooling_device0 [ 0.797689] processor LNXCPU:01: registered as cooling_device1 [ 0.797724] processor LNXCPU:02: registered as cooling_device2 [ 0.797758] processor LNXCPU:03: registered as cooling_device3 [ 0.797793] processor LNXCPU:04: registered as cooling_device4 [ 0.797830] processor LNXCPU:05: registered as cooling_device5 [ 0.797865] processor LNXCPU:06: registered as cooling_device6 [ 0.797900] processor LNXCPU:07: registered as cooling_device7 [ 0.801749] Non-volatile memory driver v1.3 [ 0.801751] Linux agpgart interface v0.103 [ 0.801754] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.803095] brd: module loaded [ 0.803612] loop: module loaded [ 0.803746] ahci 0000:00:1f.2: version 3.0 [ 0.803756] alloc irq_desc for 20 on node -1 [ 0.803757] alloc kstat_irqs on node -1 [ 0.803761] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.803784] alloc irq_desc for 56 on node -1 [ 0.803785] alloc kstat_irqs on node -1 [ 0.803790] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X [ 0.803814] ahci: SSS flag set, parallel bus scan disabled [ 0.803849] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.803852] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 0.803855] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.815994] scsi0 : ahci [ 0.816097] scsi1 : ahci [ 0.816160] scsi2 : ahci [ 0.816220] scsi3 : ahci [ 0.816280] scsi4 : ahci [ 0.816339] scsi5 : ahci [ 0.816469] ata1: SATA max UDMA/133 abar m2048@0xf3bfc000 port 0xf3bfc100 irq 56 [ 0.816471] ata2: SATA max UDMA/133 abar m2048@0xf3bfc000 port 0xf3bfc180 irq 56 [ 0.816473] ata3: SATA max UDMA/133 abar m2048@0xf3bfc000 port 0xf3bfc200 irq 56 [ 0.816475] ata4: SATA max UDMA/133 abar m2048@0xf3bfc000 port 0xf3bfc280 irq 56 [ 0.816477] ata5: SATA max UDMA/133 abar m2048@0xf3bfc000 port 0xf3bfc300 irq 56 [ 0.816479] ata6: SATA max UDMA/133 abar m2048@0xf3bfc000 port 0xf3bfc380 irq 56 [ 0.816497] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.816513] ahci 0000:05:00.0: controller can't do NCQ, turning off CAP_NCQ [ 0.816515] ahci 0000:05:00.0: controller can't do PMP, turning off CAP_PMP [ 0.816516] ahci 0000:05:00.0: MV_AHCI HACK: port_map 7 -> 3 [ 0.816553] ahci 0000:05:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this. [ 0.816603] ahci: SSS flag set, parallel bus scan disabled [ 0.816635] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode [ 0.816637] ahci 0000:05:00.0: flags: 64bit stag led slum part [ 0.816641] ahci 0000:05:00.0: setting latency timer to 64 [ 0.816720] scsi6 : ahci [ 0.816784] scsi7 : ahci [ 0.816842] scsi8 : ahci [ 0.816896] ata7: SATA max UDMA/133 abar m1024@0xf3effc00 port 0xf3effd00 irq 16 [ 0.816899] ata8: SATA max UDMA/133 abar m1024@0xf3effc00 port 0xf3effd80 irq 16 [ 0.816900] ata9: DUMMY [ 0.817134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.817136] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 0.817156] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.817165] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.817167] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.817179] drivers/usb/core/inode.c: creating file 'devices' [ 0.817181] drivers/usb/core/inode.c: creating file '001' [ 0.817216] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.817222] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.817225] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 0.817243] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.817246] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.821133] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.821134] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 0.821143] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3bff000 [ 0.821146] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.825035] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.829962] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.829986] usb usb1: default language 0x0409 [ 0.829993] usb usb1: udev 1, busnum 1, minor = 0 [ 0.829996] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.829999] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.830001] usb usb1: Product: EHCI Host Controller [ 0.830004] usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd [ 0.830006] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.830043] usb usb1: uevent [ 0.830066] usb usb1: usb_probe_device [ 0.830068] usb usb1: configuration #1 chosen from 1 choice [ 0.830072] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.830081] usb 1-0:1.0: uevent [ 0.830102] hub 1-0:1.0: usb_probe_interface [ 0.830104] hub 1-0:1.0: usb_probe_interface - got id [ 0.830105] hub 1-0:1.0: USB hub found [ 0.830110] hub 1-0:1.0: 6 ports detected [ 0.830111] hub 1-0:1.0: standalone hub [ 0.830112] hub 1-0:1.0: no power switching (usb 1.0) [ 0.830113] hub 1-0:1.0: individual port over-current protection [ 0.830114] hub 1-0:1.0: power on to power good time: 20ms [ 0.830117] hub 1-0:1.0: local power source is good [ 0.830118] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.830141] drivers/usb/core/inode.c: creating file '001' [ 0.830160] alloc irq_desc for 23 on node -1 [ 0.830161] alloc kstat_irqs on node -1 [ 0.830165] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.830174] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.830176] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.830179] drivers/usb/core/inode.c: creating file '002' [ 0.830214] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.830219] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.830222] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 0.830240] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.830243] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.834126] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.834127] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.834136] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3bfe000 [ 0.834139] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.838029] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.842946] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.842974] usb usb2: default language 0x0409 [ 0.842981] usb usb2: udev 1, busnum 2, minor = 128 [ 0.842984] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.842987] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.842989] usb usb2: Product: EHCI Host Controller [ 0.842992] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd [ 0.842994] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.843030] usb usb2: uevent [ 0.843053] usb usb2: usb_probe_device [ 0.843055] usb usb2: configuration #1 chosen from 1 choice [ 0.843059] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.843070] usb 2-0:1.0: uevent [ 0.843090] hub 2-0:1.0: usb_probe_interface [ 0.843091] hub 2-0:1.0: usb_probe_interface - got id [ 0.843092] hub 2-0:1.0: USB hub found [ 0.843096] hub 2-0:1.0: 6 ports detected [ 0.843097] hub 2-0:1.0: standalone hub [ 0.843098] hub 2-0:1.0: no power switching (usb 1.0) [ 0.843099] hub 2-0:1.0: individual port over-current protection [ 0.843100] hub 2-0:1.0: power on to power good time: 20ms [ 0.843102] hub 2-0:1.0: local power source is good [ 0.843103] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.843124] drivers/usb/core/inode.c: creating file '001' [ 0.843158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.843159] ohci_hcd: block sizes: ed 80 td 96 [ 0.843183] uhci_hcd: USB Universal Host Controller Interface driver [ 0.843199] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.843204] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.843206] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.843209] drivers/usb/core/inode.c: creating file '003' [ 0.843241] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.843247] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.843250] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.843251] uhci_hcd 0000:00:1a.0: Performing full reset [ 0.843263] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 0.843267] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800 [ 0.843291] usb usb3: default language 0x0409 [ 0.843295] usb usb3: udev 1, busnum 3, minor = 256 [ 0.843296] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.843297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843299] usb usb3: Product: UHCI Host Controller [ 0.843300] usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.843301] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.843324] usb usb3: uevent [ 0.843344] usb usb3: usb_probe_device [ 0.843346] usb usb3: configuration #1 chosen from 1 choice [ 0.843350] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.843358] usb 3-0:1.0: uevent [ 0.843377] hub 3-0:1.0: usb_probe_interface [ 0.843379] hub 3-0:1.0: usb_probe_interface - got id [ 0.843380] hub 3-0:1.0: USB hub found [ 0.843383] hub 3-0:1.0: 2 ports detected [ 0.843384] hub 3-0:1.0: standalone hub [ 0.843385] hub 3-0:1.0: no power switching (usb 1.0) [ 0.843386] hub 3-0:1.0: individual port over-current protection [ 0.843387] hub 3-0:1.0: power on to power good time: 2ms [ 0.843390] hub 3-0:1.0: local power source is good [ 0.843391] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.843401] drivers/usb/core/inode.c: creating file '001' [ 0.843423] alloc irq_desc for 21 on node -1 [ 0.843424] alloc kstat_irqs on node -1 [ 0.843427] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.843432] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.843434] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.843437] drivers/usb/core/inode.c: creating file '004' [ 0.843469] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.843474] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.843477] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.843478] uhci_hcd 0000:00:1a.1: Performing full reset [ 0.843490] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 0.843499] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880 [ 0.843518] usb usb4: default language 0x0409 [ 0.843521] usb usb4: udev 1, busnum 4, minor = 384 [ 0.843522] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.843524] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843525] usb usb4: Product: UHCI Host Controller [ 0.843526] usb usb4: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.843528] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.843550] usb usb4: uevent [ 0.843572] usb usb4: usb_probe_device [ 0.843574] usb usb4: configuration #1 chosen from 1 choice [ 0.843578] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.843586] usb 4-0:1.0: uevent [ 0.843606] hub 4-0:1.0: usb_probe_interface [ 0.843607] hub 4-0:1.0: usb_probe_interface - got id [ 0.843608] hub 4-0:1.0: USB hub found [ 0.843613] hub 4-0:1.0: 2 ports detected [ 0.843614] hub 4-0:1.0: standalone hub [ 0.843615] hub 4-0:1.0: no power switching (usb 1.0) [ 0.843616] hub 4-0:1.0: individual port over-current protection [ 0.843617] hub 4-0:1.0: power on to power good time: 2ms [ 0.843619] hub 4-0:1.0: local power source is good [ 0.843620] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.843629] drivers/usb/core/inode.c: creating file '001' [ 0.843652] alloc irq_desc for 19 on node -1 [ 0.843653] alloc kstat_irqs on node -1 [ 0.843656] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.843660] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.843662] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.843665] drivers/usb/core/inode.c: creating file '005' [ 0.843697] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.843702] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.843705] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.843707] uhci_hcd 0000:00:1a.2: Performing full reset [ 0.843719] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 0.843727] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00 [ 0.843748] usb usb5: default language 0x0409 [ 0.843751] usb usb5: udev 1, busnum 5, minor = 512 [ 0.843752] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.843754] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843755] usb usb5: Product: UHCI Host Controller [ 0.843756] usb usb5: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.843758] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.843780] usb usb5: uevent [ 0.843801] usb usb5: usb_probe_device [ 0.843803] usb usb5: configuration #1 chosen from 1 choice [ 0.843807] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.843815] usb 5-0:1.0: uevent [ 0.843836] hub 5-0:1.0: usb_probe_interface [ 0.843838] hub 5-0:1.0: usb_probe_interface - got id [ 0.843839] hub 5-0:1.0: USB hub found [ 0.843842] hub 5-0:1.0: 2 ports detected [ 0.843843] hub 5-0:1.0: standalone hub [ 0.843844] hub 5-0:1.0: no power switching (usb 1.0) [ 0.843845] hub 5-0:1.0: individual port over-current protection [ 0.843846] hub 5-0:1.0: power on to power good time: 2ms [ 0.843848] hub 5-0:1.0: local power source is good [ 0.843849] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.843859] drivers/usb/core/inode.c: creating file '001' [ 0.843879] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.843883] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.843886] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.843889] drivers/usb/core/inode.c: creating file '006' [ 0.843922] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.843927] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.843930] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.843932] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.843944] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.843947] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080 [ 0.843965] usb usb6: default language 0x0409 [ 0.843969] usb usb6: udev 1, busnum 6, minor = 640 [ 0.843970] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.843972] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843973] usb usb6: Product: UHCI Host Controller [ 0.843974] usb usb6: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.843976] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.843997] usb usb6: uevent [ 0.844019] usb usb6: usb_probe_device [ 0.844020] usb usb6: configuration #1 chosen from 1 choice [ 0.844024] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 0.844037] usb 6-0:1.0: uevent [ 0.844057] hub 6-0:1.0: usb_probe_interface [ 0.844059] hub 6-0:1.0: usb_probe_interface - got id [ 0.844060] hub 6-0:1.0: USB hub found [ 0.844063] hub 6-0:1.0: 2 ports detected [ 0.844064] hub 6-0:1.0: standalone hub [ 0.844065] hub 6-0:1.0: no power switching (usb 1.0) [ 0.844066] hub 6-0:1.0: individual port over-current protection [ 0.844067] hub 6-0:1.0: power on to power good time: 2ms [ 0.844070] hub 6-0:1.0: local power source is good [ 0.844071] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 0.844080] drivers/usb/core/inode.c: creating file '001' [ 0.844103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.844108] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.844110] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.844113] drivers/usb/core/inode.c: creating file '007' [ 0.844147] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.844152] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.844155] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.844156] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.844168] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.844172] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400 [ 0.844191] usb usb7: default language 0x0409 [ 0.844195] usb usb7: udev 1, busnum 7, minor = 768 [ 0.844196] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.844198] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844199] usb usb7: Product: UHCI Host Controller [ 0.844200] usb usb7: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.844201] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.844223] usb usb7: uevent [ 0.844244] usb usb7: usb_probe_device [ 0.844245] usb usb7: configuration #1 chosen from 1 choice [ 0.844249] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 0.844259] usb 7-0:1.0: uevent [ 0.844279] hub 7-0:1.0: usb_probe_interface [ 0.844280] hub 7-0:1.0: usb_probe_interface - got id [ 0.844281] hub 7-0:1.0: USB hub found [ 0.844285] hub 7-0:1.0: 2 ports detected [ 0.844286] hub 7-0:1.0: standalone hub [ 0.844287] hub 7-0:1.0: no power switching (usb 1.0) [ 0.844288] hub 7-0:1.0: individual port over-current protection [ 0.844289] hub 7-0:1.0: power on to power good time: 2ms [ 0.844291] hub 7-0:1.0: local power source is good [ 0.844292] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 0.844301] drivers/usb/core/inode.c: creating file '001' [ 0.844321] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.844326] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.844328] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.844331] drivers/usb/core/inode.c: creating file '008' [ 0.844369] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.844374] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.844377] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.844378] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.844390] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.844394] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480 [ 0.844412] usb usb8: default language 0x0409 [ 0.844416] usb usb8: udev 1, busnum 8, minor = 896 [ 0.844417] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.844419] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844420] usb usb8: Product: UHCI Host Controller [ 0.844421] usb usb8: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.844422] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.844445] usb usb8: uevent [ 0.844467] usb usb8: usb_probe_device [ 0.844469] usb usb8: configuration #1 chosen from 1 choice [ 0.844472] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 0.844481] usb 8-0:1.0: uevent [ 0.844501] hub 8-0:1.0: usb_probe_interface [ 0.844502] hub 8-0:1.0: usb_probe_interface - got id [ 0.844503] hub 8-0:1.0: USB hub found [ 0.844508] hub 8-0:1.0: 2 ports detected [ 0.844509] hub 8-0:1.0: standalone hub [ 0.844510] hub 8-0:1.0: no power switching (usb 1.0) [ 0.844511] hub 8-0:1.0: individual port over-current protection [ 0.844512] hub 8-0:1.0: power on to power good time: 2ms [ 0.844514] hub 8-0:1.0: local power source is good [ 0.844515] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 0.844526] drivers/usb/core/inode.c: creating file '001' [ 0.844567] Initializing USB Mass Storage driver... [ 0.844608] usbcore: registered new interface driver usb-storage [ 0.844609] USB Mass Storage support registered. [ 0.844646] usbcore: registered new interface driver libusual [ 0.844698] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.844699] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.845179] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.845233] mice: PS/2 mouse device common for all mice [ 0.845341] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 0.845357] rtc_cmos 00:03: RTC can wake from S4 [ 0.845391] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.845412] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.845441] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.845444] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 0.845486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.845665] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.845707] cpuidle: using governor ladder [ 0.845708] cpuidle: using governor menu [ 0.846283] usbcore: registered new interface driver hiddev [ 0.846309] usbcore: registered new interface driver usbhid [ 0.846310] usbhid: v2.6:USB HID core driver [ 0.846337] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 0.846505] ALSA device list: [ 0.846506] No soundcards found. [ 0.846533] Netfilter messages via NETLINK v0.30. [ 0.846737] TCP cubic registered [ 0.846738] Initializing XFRM netlink socket [ 0.846883] NET: Registered protocol family 10 [ 0.847328] IPv6 over IPv4 tunneling driver [ 0.847654] NET: Registered protocol family 17 [ 0.850065] PM: Resume from disk failed. [ 0.850072] registered taskstats version 1 [ 0.850561] Magic number: 5:762:531 [ 0.866429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.929921] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 0.929925] hub 1-0:1.0: port 2: status 0501 change 0001 [ 0.929937] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 0.929941] hub 1-0:1.0: port 5: status 0501 change 0001 [ 0.942900] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT [ 0.942904] hub 2-0:1.0: port 3: status 0501 change 0001 [ 0.942916] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 0.942919] hub 2-0:1.0: port 6: status 0501 change 0001 [ 0.942932] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00 [ 0.942952] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.942958] uhci_hcd 0000:00:1a.2: port 1 portsc 0082,00 [ 0.943993] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.943999] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00 [ 0.944019] uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00 [ 1.029865] hub 1-0:1.0: state 7 ports 6 chg 0024 evt 0000 [ 1.029873] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.081066] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion [ 1.081069] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT [ 1.081072] hub 1-0:1.0: port 2 not reset yet, waiting 50ms [ 1.120822] ata7: SATA link down (SStatus 0 SControl 300) [ 1.131793] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 1.131812] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 1.183019] ehci_hcd 0000:00:1a.7: port 5 high speed [ 1.183021] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 1.233749] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 1.273725] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.274418] ata1.00: ATA-6: WDC WD800JD-23JNC0, 06.01C06, max UDMA/133 [ 1.274422] ata1.00: 156312576 sectors, multi 16: LBA [ 1.275185] ata1.00: configured for UDMA/133 [ 1.284970] ehci_hcd 0000:00:1a.7: port 5 high speed [ 1.284972] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 1.285803] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-23JN 06.0 PQ: 0 ANSI: 5 [ 1.285944] sd 0:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.285956] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.285967] sd 0:0:0:0: [sda] Write Protect is off [ 1.285969] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.285981] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.286063] sda: sda1 sda2 sda3 [ 1.290623] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.348077] usb 1-5: udev 3, busnum 1, minor = 2 [ 1.348080] usb 1-5: New USB device found, idVendor=0409, idProduct=005a [ 1.348083] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.348127] usb 1-5: uevent [ 1.348164] usb 1-5: usb_probe_device [ 1.348169] usb 1-5: configuration #1 chosen from 1 choice [ 1.348204] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 1.348221] usb 1-5:1.0: uevent [ 1.348251] hub 1-5:1.0: usb_probe_interface [ 1.348252] hub 1-5:1.0: usb_probe_interface - got id [ 1.348254] hub 1-5:1.0: USB hub found [ 1.348325] hub 1-5:1.0: 4 ports detected [ 1.348327] hub 1-5:1.0: standalone hub [ 1.348329] hub 1-5:1.0: ganged power switching [ 1.348331] hub 1-5:1.0: global over-current protection [ 1.348333] hub 1-5:1.0: Single TT [ 1.348335] hub 1-5:1.0: TT requires at most 16 FS bit times (1332 ns) [ 1.348337] hub 1-5:1.0: power on to power good time: 0ms [ 1.348574] hub 1-5:1.0: local power source is good [ 1.348576] hub 1-5:1.0: no over-current condition exists [ 1.348578] hub 1-5:1.0: enabling power on all ports [ 1.349089] drivers/usb/core/inode.c: creating file '003' [ 1.349114] hub 2-0:1.0: state 7 ports 6 chg 0048 evt 0000 [ 1.349121] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 1.349127] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion [ 1.399654] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 1.399672] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 1.399678] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion [ 1.449156] usb 1-5: link qh256-0001/ffff88033d3a7c00 start 1 [1/0 us] [ 1.450618] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 1.450634] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 1.450641] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00 [ 1.450647] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 1.554568] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 1.656510] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 1.778441] usb 3-2: ep0 maxpacket = 8 [ 1.865451] usb usb4: suspend_rh (auto-stop) [ 1.865471] usb usb6: suspend_rh (auto-stop) [ 1.923805] usb 3-2: skipped 4 descriptors after interface [ 1.923808] usb 3-2: skipped 2 descriptors after interface [ 1.923810] usb 3-2: skipped 1 descriptor after endpoint [ 1.923813] usb 3-2: skipped 2 descriptors after interface [ 1.923816] usb 3-2: skipped 1 descriptor after endpoint [ 1.923818] usb 3-2: skipped 2 descriptors after interface [ 1.923821] usb 3-2: skipped 1 descriptor after endpoint [ 1.923824] usb 3-2: skipped 2 descriptors after interface [ 1.923827] usb 3-2: skipped 1 descriptor after endpoint [ 1.923830] usb 3-2: udev 2, busnum 3, minor = 257 [ 1.923833] usb 3-2: New USB device found, idVendor=046d, idProduct=08b6 [ 1.923835] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.923879] usb 3-2: uevent [ 1.923900] usb 3-2: usb_probe_device [ 1.923902] usb 3-2: configuration #1 chosen from 1 choice [ 1.926795] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 1.926812] usb 3-2:1.0: uevent [ 1.926870] usb 3-2: adding 3-2:1.1 (config #1, interface 1) [ 1.926880] usb 3-2:1.1: uevent [ 1.926904] usb 3-2: adding 3-2:1.2 (config #1, interface 2) [ 1.926912] usb 3-2:1.2: uevent [ 1.926935] drivers/usb/core/inode.c: creating file '002' [ 1.926945] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.926948] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 1.926953] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 [ 1.926957] hub 7-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 2.030314] hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 2.115313] usb usb5: suspend_rh (auto-stop) [ 2.132263] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 2.161246] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.163297] ata2.00: ATAPI: PIONEER DVD-RW DVR-218L, 1.01, max UDMA/100, ATAPI AN [ 2.164309] ata2.00: configured for UDMA/100 [ 2.177390] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-218L 1.01 PQ: 0 ANSI: 5 [ 2.182104] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.182107] Uniform CD-ROM driver Revision: 3.20 [ 2.182213] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.182267] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.273531] usb 7-1: skipped 1 descriptor after interface [ 2.278527] usb 7-1: default language 0x0409 [ 2.285194] async/0 used greatest stack depth: 5416 bytes left [ 2.289199] async/9 used greatest stack depth: 5400 bytes left [ 2.299517] usb 7-1: udev 2, busnum 7, minor = 769 [ 2.299520] usb 7-1: New USB device found, idVendor=2222, idProduct=3061 [ 2.299523] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.299526] usb 7-1: Product: Evoluent VerticalMouse 2 [ 2.299528] usb 7-1: Manufacturer: Kingsis Peripherals [ 2.299576] usb 7-1: uevent [ 2.299607] usb 7-1: usb_probe_device [ 2.299609] usb 7-1: configuration #1 chosen from 1 choice [ 2.312512] usb 7-1: adding 7-1:1.0 (config #1, interface 0) [ 2.312533] usb 7-1:1.0: uevent [ 2.312580] usbhid 7-1:1.0: usb_probe_interface [ 2.312585] usbhid 7-1:1.0: usb_probe_interface - got id [ 2.326639] input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 [ 2.326727] generic-usb 0003:2222:3061.0001: input,hidraw0: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2 ] on usb-0000:00:1d.1-1/input0 [ 2.326746] drivers/usb/core/inode.c: creating file '002' [ 2.326755] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 2.326760] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00 [ 2.326764] hub 8-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 2.430101] hub 8-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 2.532049] usb 8-2: new low speed USB device using uhci_hcd and address 2 [ 2.673565] usb 8-2: skipped 1 descriptor after interface [ 2.678560] usb 8-2: default language 0x0409 [ 2.699551] usb 8-2: udev 2, busnum 8, minor = 897 [ 2.699554] usb 8-2: New USB device found, idVendor=1a7c, idProduct=0068 [ 2.699556] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.699559] usb 8-2: Product: Evoluent VerticalMouse 3 [ 2.699561] usb 8-2: Manufacturer: Kingsis Peripherals [ 2.699609] usb 8-2: uevent [ 2.699642] usb 8-2: usb_probe_device [ 2.699643] usb 8-2: configuration #1 chosen from 1 choice [ 2.712545] usb 8-2: adding 8-2:1.0 (config #1, interface 0) [ 2.712562] usb 8-2:1.0: uevent [ 2.712607] usbhid 8-2:1.0: usb_probe_interface [ 2.712609] usbhid 8-2:1.0: usb_probe_interface - got id [ 2.726668] input: Kingsis Peripherals Evoluent VerticalMouse 3 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4 [ 2.726746] generic-usb 0003:1A7C:0068.0002: input,hidraw1: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 3 ] on usb-0000:00:1d.2-2/input0 [ 2.726760] drivers/usb/core/inode.c: creating file '002' [ 2.726770] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 2.726774] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 2.726777] hub 1-5:1.0: state 7 ports 4 chg 0000 evt 0000 [ 3.057790] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.058013] ata3.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133 [ 3.058017] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.058299] ata3.00: configured for UDMA/133 [ 3.068840] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 3.068960] sd 2:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.068995] sd 2:0:0:0: [sdb] Write Protect is off [ 3.068998] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.069014] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.069019] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.069106] sdb: unknown partition table [ 3.069317] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.849341] hub 4-0:1.0: hub_suspend [ 3.849346] usb usb4: bus auto-suspend [ 3.849348] usb usb4: suspend_rh [ 3.849362] hub 6-0:1.0: hub_suspend [ 3.849365] usb usb6: bus auto-suspend [ 3.849368] usb usb6: suspend_rh [ 3.944304] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.944526] ata4.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133 [ 3.944530] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.944813] ata4.00: configured for UDMA/133 [ 3.955369] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 3.955477] sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.955500] sd 3:0:0:0: [sdc] Write Protect is off [ 3.955501] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.955511] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.955514] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.955583] sdc: unknown partition table [ 3.955815] sd 3:0:0:0: [sdc] Attached SCSI disk [ 4.260116] ata5: SATA link down (SStatus 0 SControl 300) [ 4.575947] ata6: SATA link down (SStatus 0 SControl 300) [ 4.848794] hub 5-0:1.0: hub_suspend [ 4.848798] usb usb5: bus auto-suspend [ 4.848800] usb usb5: suspend_rh [ 4.848814] hub 2-0:1.0: hub_suspend [ 4.848817] usb usb2: bus auto-suspend [ 4.848819] ehci_hcd 0000:00:1d.7: suspend root hub [ 4.848838] hub 1-5:1.0: hub_suspend [ 4.848843] usb 1-5: unlink qh256-0001/ffff88033d3a7c00 start 1 [1/0 us] [ 4.848940] usb 1-5: usb auto-suspend [ 4.891784] ata8: SATA link down (SStatus 0 SControl 300) [ 4.891819] md: Waiting for all devices to be available before autodetect [ 4.891821] md: If you don't use raid, use raid=noautodetect [ 4.891949] md: Autodetecting RAID arrays. [ 4.891951] md: Scanned 0 and added 0 devices. [ 4.891952] md: autorun ... [ 4.891953] md: ... autorun DONE. [ 4.920373] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). [ 4.920550] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). [ 4.939399] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 4.939406] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 4.939420] Freeing unused kernel memory: 572k freed [ 4.939492] Write protecting the kernel read-only data: 7132k [ 4.954754] async/1 used greatest stack depth: 5048 bytes left [ 5.339227] init-early.sh used greatest stack depth: 3832 bytes left [ 5.893310] udev: starting version 149 [ 5.907125] usb usb3: uevent [ 5.907140] usb 3-0:1.0: uevent [ 5.907158] usb 3-2: uevent [ 5.907174] usb 3-2:1.0: uevent [ 5.907191] usb 3-2:1.1: uevent [ 5.907206] usb 3-2:1.2: uevent [ 5.907238] usb usb4: uevent [ 5.907248] usb 4-0:1.0: uevent [ 5.907276] usb usb5: uevent [ 5.907288] usb 5-0:1.0: uevent [ 5.907316] usb usb1: uevent [ 5.907338] usb 1-0:1.0: uevent [ 5.907360] usb 1-5: uevent [ 5.907378] usb 1-5:1.0: uevent [ 5.908108] usb usb6: uevent [ 5.908136] usb 6-0:1.0: uevent [ 5.908212] usb usb7: uevent [ 5.908240] usb 7-0:1.0: uevent [ 5.908274] usb 7-1: uevent [ 5.908304] usb 7-1:1.0: uevent [ 5.908550] usb usb8: uevent [ 5.908580] usb 8-0:1.0: uevent [ 5.908616] usb 8-2: uevent [ 5.908645] usb 8-2:1.0: uevent [ 5.908887] usb usb2: uevent [ 5.908916] usb 2-0:1.0: uevent [ 5.951726] usb usb3: uevent [ 5.952144] usb usb1: uevent [ 5.952161] usb usb7: uevent [ 5.952172] usb usb8: uevent [ 5.952807] usb usb5: uevent [ 5.952810] usb usb4: uevent [ 5.953040] usb usb6: uevent [ 5.953611] usb usb2: uevent [ 5.967645] sky2 driver version 1.25 [ 5.967682] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.967717] sky2 0000:06:00.0: setting latency timer to 64 [ 5.967754] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3 [ 5.967839] alloc irq_desc for 57 on node -1 [ 5.967841] alloc kstat_irqs on node -1 [ 5.967855] sky2 0000:06:00.0: irq 57 for MSI/MSI-X [ 5.968588] sky2 eth0: addr 00:26:18:46:3f:31 [ 5.968611] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.968622] sky2 0000:04:00.0: setting latency timer to 64 [ 5.968646] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 [ 5.968727] alloc irq_desc for 58 on node -1 [ 5.968729] alloc kstat_irqs on node -1 [ 5.968741] sky2 0000:04:00.0: irq 58 for MSI/MSI-X [ 5.969497] sky2 eth1: addr 00:26:18:46:3f:30 [ 6.010279] SB-XFi 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.010407] SB-XFi 0000:07:00.0: setting latency timer to 64 [ 6.011723] usb 8-2: uevent [ 6.012232] usb 3-2: uevent [ 6.012315] usb 1-5: uevent [ 6.019840] usb 7-1: uevent [ 6.022158] usb 8-2:1.0: uevent [ 6.022319] usb 8-2: uevent [ 6.022425] usb 8-2:1.0: uevent [ 6.022571] usb 8-2: uevent [ 6.026087] usb 7-1:1.0: uevent [ 6.026123] usb 7-1:1.0: uevent [ 6.026144] usb 7-1: uevent [ 6.026176] usb 7-1: uevent [ 6.027539] usb 8-2:1.0: uevent [ 6.027838] usb 8-2:1.0: uevent [ 6.028175] usb 7-1:1.0: uevent [ 6.028180] usb 7-1:1.0: uevent [ 6.362144] [drm] Initialized drm 1.1.0 20060810 [ 6.510676] firewire_ohci 0000:09:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.568994] firewire_ohci: Added fw-ohci device 0000:09:02.0, OHCI version 1.10 [ 6.617381] [drm] radeon defaulting to kernel modesetting. [ 6.617383] [drm] radeon kernel modesetting enabled. [ 6.617409] alloc irq_desc for 24 on node -1 [ 6.617410] alloc kstat_irqs on node -1 [ 6.617416] radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 6.617419] radeon 0000:02:00.0: setting latency timer to 64 [ 6.618235] [drm] radeon: Initializing kernel modesetting. [ 6.618256] [drm] register mmio base: 0xF3CE0000 [ 6.618257] [drm] register mmio size: 65536 [ 6.618295] ATOM BIOS: RV790 [ 6.618299] [drm] Clocks initialized ! [ 6.618312] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 6.618314] [drm] Detected VRAM RAM=256M, BAR=256M [ 6.618315] [drm] RAM width 256bits DDR [ 6.618351] [TTM] Zone kernel: Available graphics memory: 6162522 kiB. [ 6.618353] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 6.618360] [drm] radeon: 256M of VRAM memory ready [ 6.618361] [drm] radeon: 512M of GTT memory ready. [ 6.618380] [drm] Loading RV770 CP Microcode [ 6.618403] platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin [ 6.659010] platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin [ 6.666836] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.699741] [drm] ring test succeeded in 0 usecs [ 6.699884] [drm] radeon: ib pool ready. [ 6.699953] [drm] ib test succeeded in 0 usecs [ 6.700497] [drm] Radeon Display Connectors [ 6.700500] [drm] Connector 0: [ 6.700502] [drm] DVI-I [ 6.700504] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 6.700506] [drm] Encoders: [ 6.700508] [drm] DFP1: INTERNAL_UNIPHY [ 6.700510] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 6.700511] [drm] Connector 1: [ 6.700513] [drm] DIN [ 6.700514] [drm] Encoders: [ 6.700516] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 6.700518] [drm] Connector 2: [ 6.700519] [drm] DVI-I [ 6.700522] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 6.700523] [drm] Encoders: [ 6.700525] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.700527] [drm] DFP2: INTERNAL_KLDSCP_LVTMA [ 6.827802] [drm] fb mappable at 0xD0141000 [ 6.827805] [drm] vram apper at 0xD0000000 [ 6.827806] [drm] size 16384000 [ 6.827808] [drm] fb depth is 24 [ 6.827809] [drm] pitch is 10240 [ 6.836115] executing set pll [ 6.840793] executing set crtc timing [ 6.840829] [drm] TMDS-9: set mode 2560x1600 2a [ 6.942827] Console: switching to colour frame buffer device 320x100 [ 6.950949] fb0: radeondrmfb frame buffer device [ 6.950951] registered panic notifier [ 6.950958] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0 [ 6.951090] modprobe used greatest stack depth: 3568 bytes left [ 7.068893] firewire_core: created device fw0: GUID 001e8c0001f26378, S400 [ 7.211064] coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.211231] coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.211300] coretemp coretemp.2: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.211348] coretemp coretemp.3: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.211391] coretemp coretemp.4: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.211434] coretemp coretemp.5: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.211478] coretemp coretemp.6: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.211527] coretemp coretemp.7: Unable to access MSR 0xEE, for Tjmax, left at default [ 7.286741] tun: Universal TUN/TAP device driver, 1.6 [ 7.286744] tun: (C) 1999-2004 Max Krasnyansky [ 7.848343] hub 1-0:1.0: hub_suspend [ 7.848351] usb usb1: bus auto-suspend [ 7.848354] ehci_hcd 0000:00:1a.7: suspend root hub [ 8.440219] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 8.453007] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 8.467845] EXT4-fs (dm-2): mounted filesystem with ordered data mode [ 8.484168] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 9.984772] sky2 eth0: enabling interface [ 9.986535] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.062837] Bridge firewalling registered [ 10.165440] sky2 eth1: enabling interface [ 10.167202] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.896160] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 12.897933] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.058501] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control rx [ 13.060247] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 13.402818] usb usb3: uevent [ 13.402868] usb 3-0:1.0: uevent [ 13.402901] usb 3-2: uevent [ 13.402946] usb 3-2:1.0: uevent [ 13.402976] usb 3-2:1.1: uevent [ 13.403005] usb 3-2:1.2: uevent [ 13.403087] usb usb4: uevent [ 13.403133] usb 4-0:1.0: uevent [ 13.403218] usb usb5: uevent [ 13.403268] usb 5-0:1.0: uevent [ 13.403354] usb usb1: uevent [ 13.403410] usb 1-0:1.0: uevent [ 13.403442] usb 1-5: uevent [ 13.403488] usb 1-5:1.0: uevent [ 13.404641] usb usb6: uevent [ 13.404688] usb 6-0:1.0: uevent [ 13.404781] usb usb7: uevent [ 13.404828] usb 7-0:1.0: uevent [ 13.404861] usb 7-1: uevent [ 13.404907] usb 7-1:1.0: uevent [ 13.405187] usb usb8: uevent [ 13.405233] usb 8-0:1.0: uevent [ 13.405265] usb 8-2: uevent [ 13.405310] usb 8-2:1.0: uevent [ 13.405598] usb usb2: uevent [ 13.405654] usb 2-0:1.0: uevent [ 20.495617] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.548241] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 20.548426] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 20.548428] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 20.548429] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 20.856716] microcode: CPU0 updated to revision 0x11, date = 2009-04-14 [ 20.857918] microcode: CPU1 updated to revision 0x11, date = 2009-04-14 [ 20.859326] microcode: CPU2 updated to revision 0x11, date = 2009-04-14 [ 20.860965] microcode: CPU3 updated to revision 0x11, date = 2009-04-14 [ 20.862803] microcode: CPU4 updated to revision 0x11, date = 2009-04-14 [ 20.864873] microcode: CPU5 updated to revision 0x11, date = 2009-04-14 [ 20.867186] microcode: CPU6 updated to revision 0x11, date = 2009-04-14 [ 20.869990] microcode: CPU7 updated to revision 0x11, date = 2009-04-14 [ 23.583754] eth0: no IPv6 routers present [ 23.644732] eth1: no IPv6 routers present [ 24.448303] tap0: no IPv6 routers present [ 179.770933] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 2, phase 1, 106 us [ 179.778924] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 2, phase 1, 106 us [ 183.504477] mount.nfs used greatest stack depth: 2784 bytes left