Linux version 2.6.33-rc1-00366-g2f99f5c (drizzd@darc) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #20 SMP PREEMPT Thu Dec 24 13:14:55 CET 2009 Command line: root=/dev/sda3 ro resume=/dev/sda7 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) No AGP bridge found last_pfn = 0x7fed0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-D7FFF uncachable D8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07FF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f6e40] f6e40 init_memory_mapping: 0000000000000000-000000007fed0000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fed0000 page 4k kernel direct mapping tables up to 7fed0000 @ 16000-1a000 ACPI: RSDP 00000000000f6e10 00024 (v02 PTLTD ) ACPI: XSDT 000000007fed7584 0009C (v01 SECCSD LH43STAR 06040000 LTP 00000000) ACPI: FACP 000000007fedfb9a 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 000000007fed94fc 0662A (v02 INTEL CRESTLNE 06040000 INTL 20050624) ACPI: FACS 000000007fee2fc0 00040 ACPI: APIC 000000007fedfc8e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: HPET 000000007fedfcf6 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 000000007fedfd2e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: TCPA 000000007fedfd6a 00032 (v01 Intel CRESTLN 06040000 00005A52) ACPI: TMOR 000000007fedfd9c 00026 (v01 PTLTD 06040000 PTL 00000003) ACPI: APIC 000000007fedfdc2 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: HPET 000000007fedfe2a 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: BOOT 000000007fedfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 000000007fedfe8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) ACPI: SSDT 000000007fed8ead 0064F (v01 SataRe SataPri 00001000 INTL 20050624) ACPI: SSDT 000000007fed881b 00692 (v01 SataRe SataSec 00001000 INTL 20050624) ACPI: SSDT 000000007fed7bac 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 000000007fed7b06 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) ACPI: SSDT 000000007fed7620 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007fed0000 Bootmem setup node 0 0000000000000000-000000007fed0000 NODE_DATA [0000000000018000 - 000000000001cfff] bootmap [000000000001d000 - 000000000002cfdf] pages 10 (11 early reservations) ==> bootmem [0000000000 - 007fed0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 000181f944] TEXT DATA BSS ==> [0001000000 - 000181f944] #2 [0001820000 - 000182018c] BRK ==> [0001820000 - 000182018c] #3 [00000f6e50 - 0000100000] BIOS reserved ==> [00000f6e50 - 0000100000] #4 [00000f6e40 - 00000f6e50] MP-table mpf ==> [00000f6e40 - 00000f6e50] #5 [000009f800 - 000009fd71] BIOS reserved ==> [000009f800 - 000009fd71] #6 [000009ff25 - 00000f6e40] BIOS reserved ==> [000009ff25 - 00000f6e40] #7 [000009fd71 - 000009ff25] MP-table mpc ==> [000009fd71 - 000009ff25] #8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] #9 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] #10 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007fed0 On node 0 totalpages: 523871 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3823 pages, LIFO batch:0 DMA32 zone: 7108 pages used for memmap DMA32 zone: 512780 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s73880 r8192 d24424 u1048576 pcpu-alloc: s73880 r8192 d24424 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 516603 Policy zone: DMA32 Kernel command line: root=/dev/sda3 ro resume=/dev/sda7 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2058108k/2095936k available (3665k kernel code, 452k absent, 37376k reserved, 3518k data, 528k init) Hierarchical RCU implementation. NR_IRQS:1280 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1994.820 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.64 BogoMIPS (lpj=7979280) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a Booting Node 0, Processors #1 Ok. Brought up 2 CPUs Total of 2 processors activated (7979.65 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [FN00] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] pci 0000:00:1a.7: reg 10: [mem 0xf0504000-0xf05043ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.7: reg 10: [mem 0xf0504400-0xf05047ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ef] pci 0000:00:1f.2: reg 24: [io 0x18d0-0x18df] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:03:00.0: reg 10: [mem 0xf0300000-0xf0301fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff] pci 0000:04:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit] pci 0000:04:00.0: reg 18: [io 0x3000-0x30ff] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xf0200000-0xf02fffff] pci 0000:05:09.0: reg 10: [mem 0xf0400000-0xf0400fff] pci 0000:05:09.0: supports D1 D2 pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:09.0: PME# disabled pci 0000:05:09.1: reg 10: [mem 0xf0401000-0xf04010ff] pci 0000:05:09.1: supports D1 D2 pci 0000:05:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:09.1: PME# disabled pci 0000:05:09.2: reg 10: [mem 0xf0401400-0xf04014ff] pci 0000:05:09.2: supports D1 D2 pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:09.2: PME# disabled pci 0000:05:09.3: reg 10: [mem 0xf0401800-0xf04018ff] pci 0000:05:09.3: supports D1 D2 pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:09.3: PME# disabled pci 0000:05:09.4: reg 10: [mem 0xf0401c00-0xf0401cff] pci 0000:05:09.4: supports D1 D2 pci 0000:05:09.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:09.4: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf0400000-0xf04fffff] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10 ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs *5) ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *10) ACPI: PCI Interrupt Link [LNKG] (IRQs *5) ACPI: PCI Interrupt Link [LNKH] (IRQs *5) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NET: Registered protocol family 8 NET: Registered protocol family 20 HPET: 3 timers in total, 0 timers will be used for per-cpu timer Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved system 00:06: [io 0x0680-0x069f] has been reserved system 00:06: [io 0x06b0-0x06ff] has been reserved system 00:06: [io 0x0800-0x080f] has been reserved system 00:06: [io 0x0900-0x090f] has been reserved system 00:06: [io 0x1000-0x107f] has been reserved system 00:06: [io 0x1180-0x11bf] has been reserved system 00:06: [io 0x1640-0x164f] has been reserved system 00:06: [io 0xfe00] has been reserved pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:00:1c.0: BAR 8: assigned [mem 0x84000000-0x841fffff] pci 0000:00:1c.0: BAR 9: assigned [mem 0x84200000-0x843fffff 64bit pref] pci 0000:00:1c.1: BAR 9: assigned [mem 0x84400000-0x845fffff 64bit pref] pci 0000:00:1c.3: BAR 9: assigned [mem 0x84600000-0x847fffff pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x4000-0x4fff] pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff] pci 0000:00:1e.0: BAR 7: assigned [io 0x6000-0x6fff] pci 0000:00:1f.3: BAR 0: assigned [mem 0x84800000-0x848000ff] pci 0000:00:1f.3: BAR 0: set to [mem 0x84800000-0x848000ff] (PCI address [0x84800000-0x848000ff] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0x84000000-0x841fffff] pci 0000:00:1c.0: bridge window [mem 0x84200000-0x843fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff] pci 0000:00:1c.1: bridge window [mem 0x84400000-0x845fffff 64bit pref] pci 0000:04:00.0: BAR 6: assigned [mem 0x84600000-0x8461ffff pref] pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.3: bridge window [mem 0xf0200000-0xf02fffff] pci 0000:00:1c.3: bridge window [mem 0x84600000-0x847fffff pref] pci 0000:05:09.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref] pci 0000:05:09.0: BAR 10: assigned [mem 0x88000000-0x8bffffff] pci 0000:05:09.0: BAR 7: assigned [io 0x6000-0x60ff] pci 0000:05:09.0: BAR 8: assigned [io 0x6400-0x64ff] pci 0000:05:09.0: CardBus bridge to [bus 06-09] pci 0000:05:09.0: bridge window [io 0x6000-0x60ff] pci 0000:05:09.0: bridge window [io 0x6400-0x64ff] pci 0000:05:09.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:05:09.0: bridge window [mem 0x88000000-0x8bffffff] pci 0000:00:1e.0: PCI bridge to [bus 05-06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0xf0400000-0xf04fffff] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:05:09.0: power state changed by ACPI to D0 pci 0000:05:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0x84000000-0x841fffff] pci_bus 0000:02: resource 2 [mem 0x84200000-0x843fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff] pci_bus 0000:03: resource 2 [mem 0x84400000-0x845fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf02fffff] pci_bus 0000:04: resource 2 [mem 0x84600000-0x847fffff pref] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff] pci_bus 0000:05: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:05: resource 3 [io 0x0000-0xffff] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:06: resource 0 [io 0x6000-0x60ff] pci_bus 0000:06: resource 1 [io 0x6400-0x64ff] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref] pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1261787870.315:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 4019 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X Linux agpgart interface v0.103 brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 sky2 driver version 1.26 sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:04:00.0: setting latency timer to 64 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:04:00.0: irq 28 for MSI/MSI-X sky2 eth0: addr 00:24:54:02:85:e8 PPP generic driver version 2.4.2 NET: Registered protocol family 24 usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0504000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Linux video capture interface: v2.00 gspca: main v2.8.0 registered usbcore: registered new interface driver zc3xx zc3xx: registered usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.21. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.02, max UDMA/33 hda_codec: ALC262: BIOS auto-probing. ata1.00: ATA-7: TOSHIBA MK2035GSS, DK022A, max UDMA/100 ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) ALSA device list: #0: HDA Intel at 0xf0500000 irq 29 TCP bic registered NET: Registered protocol family 17 PM: Checking image partition /dev/sda7 ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-2: new high speed USB device using ehci_hcd and address 2 Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302) input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input0 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 PM: Resume from partition 8:7 PM: Checking hibernation image. PM: Error -22 checking image file PM: Resume from disk failed. drivers/rtc/hctosys.c: unable to open rtc device (rtc0) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 usb 7-2: new full speed USB device using uhci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 528k freed Write protecting the kernel read-only data: 6144k Freeing unused kernel memory: 412k freed Freeing unused kernel memory: 628k freed sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 ACPI: Power Button [PWRF] cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: 00 (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) cfg80211: Calling CRDA to update world regulatory domain thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (69 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (69 C) ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ADP1] (on-line) ACPI: SSDT 000000007fed842b 00328 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 000000007fed7e0b 0059B (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet ACPI: SSDT 000000007fed8753 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 000000007fed83a6 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) yenta_cardbus 0000:05:09.0: CardBus bridge found [144d:c031] Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized yenta_cardbus 0000:05:09.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:05:09.0: Socket status: 30000006 pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09 yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb ACPI: Fan [FAN0] (off) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33-rc1-00366-g2f99f5c-kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' Adding 2650684k swap on /dev/sda7. Priority:-1 extents:1 across:2650684k EXT3-fs (sda3): using internal journal fuse init (API version 7.13) Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Slow work thread pool: Starting up Slow work thread pool: Ready ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x microcode: CPU0 sig=0x6fa, pf=0x80, revision=0x92 platform microcode: firmware: requesting intel-ucode/06-0f-0a microcode: CPU1 sig=0x6fa, pf=0x80, revision=0x92 platform microcode: firmware: requesting intel-ucode/06-0f-0a microcode: Microcode Update Driver: v2.00 , Peter Oruba kjournald starting. Commit interval 5 seconds EXT3-fs (sda9): using internal journal EXT3-fs (sda9): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda8): using internal journal EXT3-fs (sda8): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with writeback data mode iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:26:f2:00:73:f8 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:26:f2:00:73:f8 (try 1) wlan0: authenticated wlan0: associate with AP 00:26:f2:00:73:f8 (try 1) wlan0: RX AssocResp from 00:26:f2:00:73:f8 (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. iwlagn 0000:03:00.0: Start IWL Error Log Dump: iwlagn 0000:03:00.0: Status: 0x000213E4, count: 5 iwlagn 0000:03:00.0: Desc Time data1 data2 line iwlagn 0000:03:00.0: FH_ERROR (#12) 2238238728 0x00000008 0x03130000 208 iwlagn 0000:03:00.0: blink1 blink2 ilink1 ilink2 iwlagn 0000:03:00.0: 0x05CB2 0x004C2 0x006DE 0x018B8 iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries iwlagn 0000:03:00.0: EVT_LOGT:2238233511:0x00002000:0350 iwlagn 0000:03:00.0: EVT_LOGT:2238238218:0x00000107:0106 iwlagn 0000:03:00.0: EVT_LOGT:2238238219:0x00000000:0302 iwlagn 0000:03:00.0: EVT_LOGT:2238238255:0x000000d4:0321 iwlagn 0000:03:00.0: EVT_LOGT:2238238257:0x00000000:1350 iwlagn 0000:03:00.0: EVT_LOGT:2238238257:0x00000000:1351 iwlagn 0000:03:00.0: EVT_LOGT:2238238258:0x00000000:1352 iwlagn 0000:03:00.0: EVT_LOGT:2238238258:0x00000003:1353 iwlagn 0000:03:00.0: EVT_LOGT:2238238266:0x0000001f:0357 iwlagn 0000:03:00.0: EVT_LOGT:2238238438:0x00000107:0106 iwlagn 0000:03:00.0: EVT_LOGT:2238238439:0x00000000:0302 iwlagn 0000:03:00.0: EVT_LOGT:2238238466:0x00000000:0304 iwlagn 0000:03:00.0: EVT_LOGT:2238238664:0x00000107:0106 iwlagn 0000:03:00.0: EVT_LOGT:2238238665:0x00000000:0302 iwlagn 0000:03:00.0: EVT_LOGT:2238238710:0x000000d4:0321 iwlagn 0000:03:00.0: EVT_LOGT:2238238711:0x00000000:1350 iwlagn 0000:03:00.0: EVT_LOGT:2238238711:0x00000000:1351 iwlagn 0000:03:00.0: EVT_LOGT:2238238712:0x00000000:1352 iwlagn 0000:03:00.0: EVT_LOGT:2238238712:0x00000003:1353 iwlagn 0000:03:00.0: EVT_LOGT:2238238731:0x00000000:0125 CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [drm] Initialized drm 1.1.0 20060810 nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 60.86.42.00 [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:01:00.0: BIT table 'd' not found [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2 [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [drm] nouveau 0000:01:00.0: 1: 0x00000140: type 0x40 idx 1 tag 0xff [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01001323 00010034 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010300 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC505 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC845 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD29A [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD38C [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD586 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD5EB [drm] nouveau 0000:01:00.0: 0xD5EB: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: 0xB612: parsing output script 0 [drm] nouveau 0000:01:00.0: 0xB788: parsing output script 0 [TTM] Zone kernel: Available graphics memory: 1029838 kiB. [drm] nouveau 0000:01:00.0: 256 MiB VRAM [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxprog nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxvals [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Detected a LVDS output [drm] nouveau 0000:01:00.0: Detected a DAC output [drm] nouveau 0000:01:00.0: Detected a TMDS output [drm] nouveau 0000:01:00.0: Detected a LVDS connector [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40210000, bo ffff88007ce3e600 Console: switching to colour frame buffer device 160x50 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] LVDS-7: set mode 1280x800 1a [drm] nouveau 0000:01:00.0: 0xB616: parsing output script 1 [drm] nouveau 0000:01:00.0: 0xB453: parsing clock script 0 [drm] nouveau 0000:01:00.0: 0xB5D5: parsing clock script 1 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 2 CE: hpet increasing min_delta_ns to 15000 nsec CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold