X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-gentoo-r6 x86_64 Current Operating System: Linux xpc 2.6.31-gentoo-r6 #3 SMP Fri Jan 22 15:21:17 CET 2010 x86_64 Build Date: 28 January 2010 09:42:46AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 30 10:04:02 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Main Layout" (**) |-->Screen "Screen 0" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "SabayonVga0" (**) Option "AllowMouseOpenFail" "true" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ (==) ModulePath set to "/usr/lib64/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0xde0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9598:1028:2242 ATI Technologies Inc Mobility Radeon HD 3600 Series rev 0, Mem @ 0xc0000000/268435456, 0xfe9f0000/65536, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072 (--) PCI: (0:3:0:0) 14f1:8852:0070:71d1 Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder rev 4, Mem @ 0xfe600000/2097152 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) LoadModule: "vbe" (II) Loading /usr/lib64/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "synaptics" (WW) Warning, couldn't open module synaptics (II) UnloadModule: "synaptics" (EE) Failed to load module "synaptics" (module does not exist, 0) (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "radeonhd" (II) Loading /usr/lib64/xorg/modules/drivers//radeonhd_drv.so (II) Module radeonhd: vendor="AMD GPG" compiled for 1.6.5, module version = 1.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices: RV505 : Radeon X1550, X1550 64bit. RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350. RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250. R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350. RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200. RV535 : Radeon X1300, X1650. RV550 : Radeon X2300 HD. RV560 : Radeon X1650. RV570 : Radeon X1950, X1950 GT; FireGL V7400. R580 : Radeon X1900, X1950; AMD Stream Processor. R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650. RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000. RV620 : Radeon HD 3450, HD 3470. RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630; FireGL V3600/V5600. RV635 : Radeon HD 3650, HD 3670. RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170. R680 : Radeon HD 3870 X2. M52 : Mobility Radeon X1300. M54 : Mobility Radeon X1400; M54-GL. M56 : Mobility Radeon X1600; Mobility FireGL V5200. M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200. M62 : Mobility Radeon X1350. M64 : Mobility Radeon X1450, X2300. M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250. M68 : Mobility Radeon X1900. M71 : Mobility Radeon HD 2300. M72 : Mobility Radeon HD 2400; Radeon E2400. M74 : Mobility Radeon HD 2400 XT. M76 : Mobility Radeon HD 2600; (Gemini ATI) Mobility Radeon HD 2600 XT. M82 : Mobility Radeon HD 3400. M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700. M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2. RS600 : Radeon Xpress 1200, Xpress 1250. RS690 : Radeon X1200, X1250, X1270. RS740 : RS740, RS740M. RS780 : Radeon HD 3100/3200/3300 Series. R700 : Radeon R700. RV710 : Radeon HD4570, HD4350. RV730 : Radeon HD4670, HD4650. RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED. RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro. RV790 : Radeon HD 4890. M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL. M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED. M96 : Mobility Radeon HD4600. M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED. M98 : Mobility Radeon HD4850, HD4870. (II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 8cbff7bf (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Selected EXA 2D acceleration. (II) RADEONHD(0): Card not in database: 0x9598:0x1028:0x2242; using generic modesetting. If - and only if - your card does not work or does not work optimally please contact radeonhd@opensuse.org to help rectify this. Use the subject: 0x9598:0x1028:0x2242: and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RV635 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xfe9f0000 to 0x7fa13d83a000 (size 0x00010000) (II) RADEONHD(0): PCIE Card Detected (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1028 SubsystemID: 0x2242 IOBaseAddress: 0xdc00 Filename: S3B38201.103 BIOS Bootup Message: RV635 A11 B38201 DDR2 16Mx16 256M 725e/500m (II) RADEONHD(0): Analog TV Default Mode: 1 (II) RADEONHD(0): Found default TV Mode NTSC (--) RADEONHD(0): VideoRAM: 262144 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffc000 (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffc000 (II) RADEONHD(0): Default Engine Clock: 725000 (II) RADEONHD(0): Default Memory Clock: 500000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): Found libdri 5.4.0. drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) RADEONHD(0): Found libdrm 1.3.0. (II) RADEONHD(0): Found radeon drm 1.31.0. (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000) (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000) (II) RADEONHD(0): FirmwareInfo Revision 0104 (II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0 (II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0 (II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0 (II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0 (II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz (II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz (II) RADEONHD(0): Default Engine Clock: 725000 (II) RADEONHD(0): Default Memory Clock: 500000 (II) RADEONHD(0): Current Engine Clock: 722250 (II) RADEONHD(0): Current Memory Clock: 495000 (II) RADEONHD(0): Current Chip Voltage: 0 (II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore) (II) RADEONHD(0): Power Management: Raw Ranges (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V (II) RADEONHD(0): Maximum 750000 kHz / 525000 kHz / 1.250 V (II) RADEONHD(0): Default 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): PowerPlayInfo Revision 0401 (II) RADEONHD(0): Power Management: Validated Ranges (II) RADEONHD(0): Minimum 110000 kHz / 250000 kHz / 0.900 V (II) RADEONHD(0): Maximum 750000 kHz / 525000 kHz / 1.250 V (II) RADEONHD(0): Default 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Power Management: Known Good Configurations (II) RADEONHD(0): 1 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): 2 110000 kHz / 252000 kHz / 0.900 V (II) RADEONHD(0): 3 300000 kHz / 400000 kHz / 1.000 V (II) RADEONHD(0): 4 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): 5 600000 kHz / 500000 kHz / 1.150 V (II) RADEONHD(0): 6 600000 kHz / 500000 kHz / 1.150 V (II) RADEONHD(0): 7 600000 kHz / 500000 kHz / 1.150 V (II) RADEONHD(0): 8 300000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): 9 300000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Power Management: Final Levels (II) RADEONHD(0): Off 110000 kHz / 250000 kHz / 0.900 V (II) RADEONHD(0): Idle 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Slow2D 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Fast2D 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Slow3D 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Fast3D 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Max3D 750000 kHz / 525000 kHz / 1.250 V (II) RADEONHD(0): User 725000 kHz / 500000 kHz / 1.250 V (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP1", RHD_DDC_2, RHD_HPD_0, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_NONE } } (--) RADEONHD(0): Attaching Output UNIPHY_A to Connector DVI-D 1 (--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector DVI-I 2 (--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2 (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output UNIPHY_A (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output UNIPHY_KLDSKP_LVTMA (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A (II) RADEONHD(0): Output DVI-D_1 using monitor section Generic Monitor (II) RADEONHD(0): Output DVI-D_1 has no monitor section (II) RADEONHD(0): Output DVI-I_2/digital has no monitor section (II) RADEONHD(0): Output DVI-I_2/analog has no monitor section (II) RADEONHD(0): Setting UNIPHY_KLDSKP_LVTMA to incoherent (II) RADEONHD(0): I2C device "RHD I2C line 0:E-EDID segment register" registered at address 0x60. (II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0. (II) RADEONHD(0): EDID data for DELL E248WFP (II) RADEONHD(0): Manufacturer: DEL Model: a02e Serial#: 894260307 (II) RADEONHD(0): Year: 2008 Week: 26 (II) RADEONHD(0): EDID Version: 1.3 (II) RADEONHD(0): Digital Display Input (II) RADEONHD(0): Max Image Size [cm]: horiz.: 52 vert.: 32 (II) RADEONHD(0): Gamma: 2.20 (II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off (II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) RADEONHD(0): Default color space is primary color space (II) RADEONHD(0): First detailed timing is preferred mode (II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) RADEONHD(0): Supported established timings: (II) RADEONHD(0): 720x400@70Hz (II) RADEONHD(0): 640x480@60Hz (II) RADEONHD(0): 640x480@75Hz (II) RADEONHD(0): 800x600@60Hz (II) RADEONHD(0): 800x600@75Hz (II) RADEONHD(0): 1024x768@60Hz (II) RADEONHD(0): 1024x768@75Hz (II) RADEONHD(0): 1280x1024@75Hz (II) RADEONHD(0): Manufacturer's mask: 0 (II) RADEONHD(0): Supported standard timings: (II) RADEONHD(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) RADEONHD(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) RADEONHD(0): Supported detailed timing: (II) RADEONHD(0): clock: 154.0 MHz Image Size: 518 x 324 mm (II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) RADEONHD(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) RADEONHD(0): Serial No: G274H86N5MTS (II) RADEONHD(0): Monitor name: DELL E248WFP (II) RADEONHD(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) RADEONHD(0): EDID (in hex): (II) RADEONHD(0): 00ffffffffffff0010ac2ea053544d35 (II) RADEONHD(0): 1a12010380342078eeee91a3544c9926 (II) RADEONHD(0): 0f5054a54b00714f8180a94001010101 (II) RADEONHD(0): 010101010101283c80a070b023403020 (II) RADEONHD(0): 360006442100001a000000ff00473237 (II) RADEONHD(0): 344838364e354d545320000000fc0044 (II) RADEONHD(0): 454c4c20453234385746500a000000fd (II) RADEONHD(0): 00384c1e5311000a20202020202000eb (II) RADEONHD(0): Output DVI-D_1 disconnected (II) RADEONHD(0): Output DVI-I_2/digital connected (II) RADEONHD(0): Output DVI-I_2/analog disconnected (II) RADEONHD(0): Using exact sizes for initial modes (II) RADEONHD(0): Output DVI-I_2/digital using initial mode 1920x1200 (II) RADEONHD(0): RandR 1.2 support enabled (==) RADEONHD(0): RGB weight 888 (==) RADEONHD(0): Default visual is TrueColor (==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEONHD(0): Using 3840x1920 Framebuffer with 3840 pitch (II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x01C20000) (==) RADEONHD(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib64/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.5, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01C28000 (size = 0x01998000) (II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x035C0000 (size = 0x01C20000) (II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x051E0000 (size = 0x01C20000) (II) RADEONHD(0): FB: Allocated GART table at offset 0x0FFF0000 (size = 0x00010000, end of FB) (II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x06E00000 (size = 0x09000000) (II) RADEONHD(0): Using 16 MB GART aperture (II) RADEONHD(0): Using 2 MB for the ring buffer (II) RADEONHD(0): Using 2 MB for vertex/indirect buffers (II) RADEONHD(0): Using 12 MB for GART textures (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) RADEONHD(0): Mapped IO @ 0xfe9f0000 to 0x7fa13d83a000 (size 0x00010000) (II) RADEONHD(0): Mapped FB @ 0xc0000000 to 0x7fa12951f000 (size 0x10000000) (II) RADEONHD(0): Attempting to enable power management (II) RADEONHD(0): Current Engine Clock: 722250 (II) RADEONHD(0): Current Memory Clock: 495000 (II) RADEONHD(0): Current Chip Voltage: 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) RADEONHD(0): [drm] Using the DRM lock SAREA also for drawables. (II) RADEONHD(0): [drm] framebuffer handle = 0xc0000000 (II) RADEONHD(0): [drm] added 1 reserved context for kernel (II) RADEONHD(0): X context handle = 0x1 (II) RADEONHD(0): [drm] installed DRM signal handler (II) RADEONHD(0): [pci] 16384 kB allocated with handle 0x123ee900 (II) RADEONHD(0): [pci] ring handle = 0x2b7ff000 (II) RADEONHD(0): [pci] Ring mapped at 0x7fa12931e000 (II) RADEONHD(0): [pci] Ring contents 0x00000000 (II) RADEONHD(0): [pci] ring read ptr handle = 0x1b7fe000 (II) RADEONHD(0): [pci] Ring read ptr mapped at 0x7fa13d837000 (II) RADEONHD(0): [pci] Ring read ptr contents 0x00000000 (II) RADEONHD(0): [pci] vertex/indirect buffers handle = 0x2b7fe000 (II) RADEONHD(0): [pci] Vertex/indirect buffers mapped at 0x7fa12911e000 (II) RADEONHD(0): [pci] Vertex/indirect buffers contents 0x00000000 (II) RADEONHD(0): [pci] GART texture map handle = 0x2b800000 (II) RADEONHD(0): [pci] GART Texture map mapped at 0x7fa12855e000 (II) RADEONHD(0): [drm] register handle = 0x2fff8000 (II) RADEONHD(0): [dri] Visual configs initialized (II) RADEONHD(0): Attempting to set Engine Clock to 725000 (II) RADEONHD(0): Current Engine Clock: 722250 (II) RADEONHD(0): Current Memory Clock: 495000 (II) RADEONHD(0): Current Chip Voltage: 0 (II) RADEONHD(0): [DRI] installation complete (II) RADEONHD(0): [drm] Added 32 65536 byte vertex/indirect buffers (II) RADEONHD(0): [drm] Mapped 32 vertex/indirect buffers (II) RADEONHD(0): [drm] dma control initialized, using IRQ 16 (II) RADEONHD(0): [drm] Initialized kernel GART heap manager, 12320768 (II) RADEONHD(0): Direct rendering enabled (II) RADEONHD(0): Using DRM Command Processor (indirect) for acceleration. (II) EXA(0): Offscreen pixmap area of 26836992 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (II) UploadToScreen (II) DownloadFromScreen (==) RADEONHD(0): Backing store disabled (==) RADEONHD(0): Silken mouse enabled (II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) RADEONHD(0): Calling UNIPHYTransmitterControl (II) RADEONHD(0): UNIPHYTransmitterControl Successful (II) RADEONHD(0): Calling UNIPHYTransmitterControl (II) RADEONHD(0): UNIPHYTransmitterControl Successful (II) RADEONHD(0): Mapping DIG2 encoder to KLDSKP_LVTMA (II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1920x1200" 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync None (II) RADEONHD(0): RHDAudioSetClock: using UNIPHY_KLDSKP_LVTMA as clock source with 154000 khz (II) RADEONHD(0): Using ACR timing N=4096 CTS=154000 for frequency 32000 (II) RADEONHD(0): Using ACR timing N=6272 CTS=171111 for frequency 44100 (II) RADEONHD(0): Using ACR timing N=6144 CTS=154000 for frequency 48000 (II) RADEONHD(0): Calling UNIPHYTransmitterControl (II) RADEONHD(0): UNIPHYTransmitterControl Successful (II) RADEONHD(0): Calling UNIPHYTransmitterControl (II) RADEONHD(0): UNIPHYTransmitterControl Successful (II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1 (II) RADEONHD(0): DPMS enabled (II) RADEONHD(0): Xv: Textured Video initialised. (WW) RADEONHD(0): Option "UseEvents" is not used (WW) RADEONHD(0): Option "LogoPath" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (EE) AIGLX error: dlopen of /usr/lib64/dri/r600_dri.so failed (/usr/lib64/dri/r600_dri.so: cannot open shared object file: No such file or directory) (EE) AIGLX: reverting to software rendering (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) RADEONHD(0): Setting screen physical size to 518 x 324 (II) config/hal: Adding input device Dell Dell USB Keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.5, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Dell Dell USB Keyboard: always reports core events (**) Dell Dell USB Keyboard: Device: "/dev/input/event6" (II) Dell Dell USB Keyboard: Found absolute axes (II) Dell Dell USB Keyboard: Found keys (II) Dell Dell USB Keyboard: Configuring as mouse (II) Dell Dell USB Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Dell Dell USB Keyboard: (accel) keeping acceleration scheme 1 (**) Dell Dell USB Keyboard: (accel) filter chain progression: 2.00 (**) Dell Dell USB Keyboard: (accel) filter stage 0: 20.00 ms (**) Dell Dell USB Keyboard: (accel) set acceleration profile 0 (II) Dell Dell USB Keyboard: initialized for absolute axes. (II) config/hal: Adding input device Dell Dell USB Keyboard (**) Dell Dell USB Keyboard: always reports core events (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" (II) Dell Dell USB Keyboard: Found keys (II) Dell Dell USB Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "dellusbmm" (**) Option "xkb_layout" "fr" (II) config/hal: Adding input device Dell Premium USB Optical Mouse (**) Dell Premium USB Optical Mouse: always reports core events (**) Dell Premium USB Optical Mouse: Device: "/dev/input/event2" (II) Dell Premium USB Optical Mouse: Found 14 mouse buttons (II) Dell Premium USB Optical Mouse: Found scroll wheel(s) (II) Dell Premium USB Optical Mouse: Found relative axes (II) Dell Premium USB Optical Mouse: Found x and y relative axes (II) Dell Premium USB Optical Mouse: Configuring as mouse (**) Dell Premium USB Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Dell Premium USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Dell Premium USB Optical Mouse" (type: MOUSE) (**) Dell Premium USB Optical Mouse: (accel) keeping acceleration scheme 1 (**) Dell Premium USB Optical Mouse: (accel) filter chain progression: 2.00 (**) Dell Premium USB Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Dell Premium USB Optical Mouse: (accel) set acceleration profile 0 (II) Dell Premium USB Optical Mouse: initialized for relative axes. (II) config/hal: Adding input device Logitech BT Mini-Receiver (**) Logitech BT Mini-Receiver: always reports core events (**) Logitech BT Mini-Receiver: Device: "/dev/input/event4" (II) Logitech BT Mini-Receiver: Found 16 mouse buttons (II) Logitech BT Mini-Receiver: Found scroll wheel(s) (II) Logitech BT Mini-Receiver: Found relative axes (II) Logitech BT Mini-Receiver: Found x and y relative axes (II) Logitech BT Mini-Receiver: Found absolute axes (II) Logitech BT Mini-Receiver: Found keys (II) Logitech BT Mini-Receiver: Configuring as mouse (II) Logitech BT Mini-Receiver: Configuring as keyboard (**) Logitech BT Mini-Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech BT Mini-Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech BT Mini-Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Logitech BT Mini-Receiver: (accel) keeping acceleration scheme 1 (**) Logitech BT Mini-Receiver: (accel) filter chain progression: 2.00 (**) Logitech BT Mini-Receiver: (accel) filter stage 0: 20.00 ms (**) Logitech BT Mini-Receiver: (accel) set acceleration profile 0 (II) Logitech BT Mini-Receiver: initialized for relative axes. (WW) Logitech BT Mini-Receiver: ignoring absolute axes. (II) config/hal: Adding input device Logitech BT Mini-Receiver (**) Logitech BT Mini-Receiver: always reports core events (**) Logitech BT Mini-Receiver: Device: "/dev/input/event3" (II) Logitech BT Mini-Receiver: Found keys (II) Logitech BT Mini-Receiver: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech BT Mini-Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "dellusbmm" (**) Option "xkb_layout" "fr" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" Backtrace: 0: /usr/bin/X(xorg_backtrace+0x26) [0x4ec5d6] 1: /usr/bin/X(xf86SigHandler+0x39) [0x497679] 2: /lib/libc.so.6 [0x7fa13b16a3a0] 3: /usr/bin/X [0x45dca0] 4: /usr/bin/X(GetKeyboardValuatorEvents+0x362) [0x45e242] 5: /usr/bin/X(GetKeyboardEvents+0x17) [0x45e327] 6: /usr/bin/X(xf86PostKeyboardEvent+0x6f) [0x474e5f] 7: /usr/lib64/xorg/modules/input//evdev_drv.so [0x7fa127af39df] 8: /usr/bin/X [0x497765] 9: /usr/bin/X [0x4707d9] 10: /lib/libpthread.so.0 [0x7fa13d21bdf0] 11: /lib/libc.so.6(__select+0x13) [0x7fa13b201dd3] 12: /usr/bin/X(WaitForSomething+0x1cb) [0x4ea19b] 13: /usr/bin/X(Dispatch+0xa0) [0x44b3b0] 14: /usr/bin/X(main+0x3aa) [0x43155a] 15: /lib/libc.so.6(__libc_start_main+0xe6) [0x7fa13b156a26] 16: /usr/bin/X [0x4309f9] Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) Dell Dell USB Keyboard: Close (II) UnloadModule: "evdev" (II) Dell Dell USB Keyboard: Close (II) UnloadModule: "evdev" (II) Dell Premium USB Optical Mouse: Close (II) UnloadModule: "evdev" (II) Logitech BT Mini-Receiver: Close (II) UnloadModule: "evdev" (II) Logitech BT Mini-Receiver: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) RADEONHD(0): Attempting to disable power management (II) RADEONHD(0): Attempting to set Engine Clock to 722250 (II) RADEONHD(0): Current Engine Clock: 722250 (II) RADEONHD(0): Current Memory Clock: 495000 (II) RADEONHD(0): Current Chip Voltage: 0