Initializing cgroup subsys cpuset Linux version 2.6.32-drm-radeon-testing-25 (root@myrtle) (gcc version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #10 SMP PREEMPT Fri Feb 12 20:28:06 GMT 2010 Command line: root=/dev/sda5 ro earlyprintk=vga pci=nommconf KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff70000 (usable) BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data) BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS) BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) bootconsole [earlyvga0] enabled PCI: Unknown option `nommconf' DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FE0000000 write-back 2 base 120000000 mask FF0000000 write-back 3 base 0D0000000 mask FF0000000 uncachable 4 base 0E0000000 mask FE0000000 uncachable 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcff70 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cff70000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cff70000 page 4k kernel direct mapping tables up to cff70000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 14000-1a000 RAMDISK: 37af1000 - 37fef4c9 ACPI: RSDP 00000000000faf00 00024 (v02 ACPIAM) ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 06000812 MSFT 00000097) ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 06000812 MSFT 00000097) ACPI: DSDT 00000000cff70440 09647 (v01 A0993 A0993001 00000001 INTL 20060113) ACPI: FACS 00000000cff7e000 00040 ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 06000812 MSFT 00000097) ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 06000812 MSFT 00000097) ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM 06000812 MSFT 00000097) ACPI: HPET 00000000cff79a90 00038 (v01 A_M_I_ OEMHPET 06000812 MSFT 00000097) ACPI: OSFR 00000000cff79ad0 000B0 (v01 A_M_I_ OEMOSFR 06000812 MSFT 00000097) ACPI: SSDT 00000000cff7eb20 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000188b0a4] TEXT DATA BSS ==> [0001000000 - 000188b0a4] #3 [0037af1000 - 0037fef4c9] RAMDISK ==> [0037af1000 - 0037fef4c9] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [000188c000 - 000188c270] BRK ==> [000188c000 - 000188c270] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cff70 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048319 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3823 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833448 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79064 r8192 d23336 u524288 pcpu-alloc: s79064 r8192 d23336 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031191 Kernel command line: root=/dev/sda5 ro earlyprintk=vga pci=nommconf PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4046344k/4980736k available (5405k kernel code, 787460k absent, 146004k reserved, 2360k data, 448k init) Experimental preemptable hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled, bootconsole disabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 3000.129 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.25 BogoMIPS (lpj=3000129) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5999.06 BogoMIPS (lpj=2999534) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (11999.32 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8ffc00-0xfe8fffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f8000-0xfe8fbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8ff800-0xfe8ffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8ff400-0xfe8ff4ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9e0000-0xfe9effff] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:04:00.0: reg 10 32bit mmio pref: [0xfdffe000-0xfdffefff] pci 0000:04:00.1: reg 10 32bit mmio pref: [0xfdfff000-0xfdffffff] pci 0000:04:01.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:04:01.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff] pci 0000:04:01.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebeffff] pci 0000:04:01.0: PME# supported from D0 pci 0000:04:01.0: PME# disabled pci 0000:04:02.0: reg 10 io port: [0xe480-0xe49f] pci 0000:04:02.0: supports D1 D2 pci 0000:04:02.1: reg 10 io port: [0xec00-0xec07] pci 0000:04:02.1: supports D1 D2 pci 0000:04:03.0: reg 10 32bit mmio: [0xfebfe000-0xfebfefff] pci 0000:04:03.0: supports D1 D2 pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:06: ioport range 0x290-0x29f has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x500-0x57f could not be reserved system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff has been reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved pci 0000:04:01.0: BAR 6: address space collision on of device [0xfebe0000-0xfebeffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff pci 0000:00:1c.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.5: IO window: 0xd000-0xdfff pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.5: PREFETCH window: 0x000000f0400000-0x000000f05fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:1e.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf03fffff] pci_bus 0000:03: resource 2 pref mem [0xfde00000-0xfdefffff] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] pci_bus 0000:02: resource 2 pref mem [0xf0400000-0xf05fffff] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff] pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5113k freed audit: initializing netlink socket (disabled) type=2000 audit(1266226896.228:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7914 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:00.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFE9E0000 [drm] register mmio size: 65536 ATOM BIOS: 9442.11.10.0.2.AS01 [drm] Clocks initialized ! [drm] 4 Power State(s) [drm] State 0 Default (default) [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 625000/993000 [drm] 1 engine/memory: 625000/993000 [drm] 2 engine/memory: 625000/993000 [drm] State 1 Performance [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 160000/250000 [drm] 1 engine/memory: 500000/750000 [drm] 2 engine/memory: 625000/993000 [drm] State 2 Default [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 500000/750000 [drm] 1 engine/memory: 500000/750000 [drm] 2 engine/memory: 500000/750000 [drm] State 3 Performance [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 625000/993000 [drm] 1 engine/memory: 625000/993000 [drm] 2 engine/memory: 625000/993000 [drm] radeon: power management initialized mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 2026194 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 27 for MSI/MSI-X [drm] radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RV770 Microcode platform radeon_cp.0: firmware: using built-in firmware radeon/RV770_pfp.bin platform radeon_cp.0: firmware: using built-in firmware radeon/RV770_me.bin platform radeon_cp.0: firmware: using built-in firmware radeon/R700_rlc.bin [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Default TV standard: NTSC [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] DIN [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] HPD2 [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_KLDSCP_LVTMA [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] fb mappable at 0xD0141000 [drm] vram apper at 0xD0000000 [drm] size 9216000 [drm] fb depth is 24 [drm] pitch is 7680 Console: switching to colour frame buffer device 160x64 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:02:00.0: setting latency timer to 64 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP bic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 Bridge firewalling registered registered taskstats version 1 rtc_cmos 00:03: setting system clock to 2010-02-15 09:41:37 UTC (1266226897) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.01: SATA link down (SStatus 0 SControl 300) ata2.01: link offline, clearing class 3 to NONE ata1.00: ATA-8: ST3750330AS, SD15, max UDMA/133 ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: ATAPI: PIONEER DVD-RW DVR-215, 1.19, max UDMA/66 ata2.00: configured for UDMA/66 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.19 PQ: 0 ANSI: 5 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 448k freed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller udev: renamed network interface eth0 to eth1 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00 eth0: VIA Rhine II at 0xfebffc00, 00:05:5d:01:96:2b, IRQ 17. eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1. firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 udev: renamed network interface eth0 to eth2 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found sr0: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 hub 1-0:1.0: 6 ports detected sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 2 usb 1-3: configuration #1 chosen from 1 choice usb 2-2: new high speed USB device using ehci_hcd and address 2 firewire_core: created device fw0: GUID 001e8c0001478d1d, S400 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2.1: new high speed USB device using ehci_hcd and address 3 usb 2-2.1: configuration #1 chosen from 1 choice hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 4 ports detected usb 2-2.1.1: new high speed USB device using ehci_hcd and address 4 usb 2-2.1.1: configuration #1 chosen from 1 choice udev: starting version 150 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver input: PC Speaker as /devices/platform/pcspkr/input/input2 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning gameport: EMU10K1 is pci0000:04:02.1/gameport0, io 0xec00, speed 1050kHz EMU10K1_Audigy 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 Linux video capture interface: v2.00 bttv: driver version 0.9.18 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bttv0: Bt878 (rev 17) at 0000:04:00.0, irq: 16, latency: 64, mmio: 0xfdffe000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,autodetected] IRQ 16/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init] bttv0: tuner absent bttv0: add subdevice "dvb0" input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878 0000:04:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions. bt878(0): Bt878 (rev 17) at 04:00.1, irq: 16, latency: 64, memory: 0xfdfff000 IRQ 16/bt878: IRQF_DISABLED is not guaranteed on shared IRQs HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 DVB: registering new adapter (bttv0) dst(0) dst_get_device_id: Recognise [DTTDIG] DST type flags : 0x10 firmware version = 2 dst(0) dst_get_mac: MAC Address=[00:08:ca:10:13:22] DVB: registering adapter 0 frontend 11 (DST DVB-T)... Adding 7815580k swap on /dev/sda1. Priority:-1 extents:1 across:7815580k EXT3 FS on sda5, internal journal loop: module loaded fuse init (API version 7.13) kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with writeback data mode. REISERFS (device dm-1): found reiserfs format "3.6" with standard journal REISERFS (device dm-1): using ordered data mode REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-1): checking transaction log (dm-1) REISERFS (device dm-1): Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with writeback data mode. REISERFS (device dm-2): found reiserfs format "3.6" with standard journal REISERFS (device dm-2): using ordered data mode REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-2): checking transaction log (dm-2) REISERFS (device dm-2): Using r5 hash to sort names REISERFS (device dm-5): found reiserfs format "3.6" with standard journal REISERFS (device dm-5): using ordered data mode REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-5): checking transaction log (dm-5) REISERFS (device dm-5): Using r5 hash to sort names NTFS driver 2.1.29 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs warning (device sda3): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs error (device sda3): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. NTFS-fs warning (device sda3): load_system_files(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows. usb-storage: device scan complete scsi 4:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 scsi 4:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 4:0:0:1: Attached scsi generic sg3 type 0 sd 4:0:0:0: [sdb] Attached SCSI removable disk sd 4:0:0:1: [sdc] Attached SCSI removable disk device eth1 entered promiscuous mode ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X ATL1E 0000:02:00.0: ATL1E: eth1 NIC Link is Up<1000 Mbps Full Duplex> device tap0 entered promiscuous mode br0: port 2(tap0) entering learning state br0: port 1(eth1) entering learning state br0: port 2(tap0) entering forwarding state br0: port 1(eth1) entering forwarding state eth2: link up, 100Mbps, full-duplex, lpa 0x45E1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ip6_tables: (C) 2000-2006 Netfilter Core Team sixxs: Disabled Privacy Extensions [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 svc: failed to register lockdv1 RPC service (errno 97). [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized UDF-fs: No VRS found UDF-fs: No partition found (1) ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A usb 2-2: USB disconnect, address 2 usb 2-2.1: USB disconnect, address 3 usb 2-2.1.1: USB disconnect, address 4 usb 2-2: new high speed USB device using ehci_hcd and address 5 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2.1: new high speed USB device using ehci_hcd and address 6 usb 2-2.1: configuration #1 chosen from 1 choice hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 4 ports detected usb 2-2.1.1: new high speed USB device using ehci_hcd and address 7 usb 2-2.1.1: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 7 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 5:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 scsi 5:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 sd 5:0:0:0: Attached scsi generic sg2 type 0 sd 5:0:0:1: Attached scsi generic sg3 type 0 sd 5:0:0:0: [sdb] Attached SCSI removable disk sd 5:0:0:1: [sdc] Attached SCSI removable disk VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 VFS: busy inodes on changed media or resized disk sr0 usb 2-2: USB disconnect, address 5 usb 2-2.1: USB disconnect, address 6 usb 2-2.1.1: USB disconnect, address 7 usb 2-2: new high speed USB device using ehci_hcd and address 8 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2.1: new high speed USB device using ehci_hcd and address 9 usb 2-2.1: configuration #1 chosen from 1 choice hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 4 ports detected usb 2-2.1.1: new high speed USB device using ehci_hcd and address 10 usb 2-2.1.1: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 10 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:1: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:1: [sdc] Attached SCSI removable disk radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! radeon 0000:01:00.0: z/stencil with no depth buffer radeon 0000:01:00.0: r600_packet3_check:1055 invalid cmd stream 140 [drm:radeon_cs_ioctl] *ERROR* Invalid command stream ! usb 2-2: USB disconnect, address 8 usb 2-2.1: USB disconnect, address 9 usb 2-2.1.1: USB disconnect, address 10 usb 2-2: new high speed USB device using ehci_hcd and address 11 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2.1: new high speed USB device using ehci_hcd and address 12 usb 2-2.1: configuration #1 chosen from 1 choice hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 4 ports detected usb 2-2.1.1: new high speed USB device using ehci_hcd and address 13 usb 2-2.1.1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 13 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 7:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 scsi 7:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 sd 7:0:0:0: Attached scsi generic sg2 type 0 sd 7:0:0:1: Attached scsi generic sg3 type 0 sd 7:0:0:0: [sdb] Attached SCSI removable disk sd 7:0:0:1: [sdc] Attached SCSI removable disk devkit-disks-da[4858]: segfault at 100000008 ip 000000000041ec5e sp 00007fff172e12e0 error 4 in devkit-disks-daemon[400000+2d000] usb 2-2: USB disconnect, address 11 usb 2-2.1: USB disconnect, address 12 usb 2-2.1.1: USB disconnect, address 13 usb 2-2: new high speed USB device using ehci_hcd and address 14 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2.1: new high speed USB device using ehci_hcd and address 15 usb 2-2.1: configuration #1 chosen from 1 choice hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 4 ports detected usb 2-2.1.1: new high speed USB device using ehci_hcd and address 16 usb 2-2.1.1: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 16 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 8:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 scsi 8:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 sd 8:0:0:0: Attached scsi generic sg2 type 0 sd 8:0:0:1: Attached scsi generic sg3 type 0 sd 8:0:0:0: [sdb] Attached SCSI removable disk sd 8:0:0:1: [sdc] Attached SCSI removable disk You have old & broken userspace please consider updating mesa usb 2-2: USB disconnect, address 14 usb 2-2.1: USB disconnect, address 15 usb 2-2.1.1: USB disconnect, address 16 usb 2-2: new high speed USB device using ehci_hcd and address 17 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2.1: new high speed USB device using ehci_hcd and address 18 usb 2-2.1: configuration #1 chosen from 1 choice hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 4 ports detected usb 2-2.1.1: new high speed USB device using ehci_hcd and address 19 usb 2-2.1.1: configuration #1 chosen from 1 choice scsi9 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 19 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 9:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 scsi 9:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 sd 9:0:0:0: Attached scsi generic sg2 type 0 sd 9:0:0:1: Attached scsi generic sg3 type 0 sd 9:0:0:0: [sdb] Attached SCSI removable disk sd 9:0:0:1: [sdc] Attached SCSI removable disk usb 2-2: USB disconnect, address 17 usb 2-2.1: USB disconnect, address 18 usb 2-2.1.1: USB disconnect, address 19 usb 2-2: new high speed USB device using ehci_hcd and address 20 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2.1: new high speed USB device using ehci_hcd and address 21 usb 2-2.1: configuration #1 chosen from 1 choice hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 4 ports detected usb 2-2.1.1: new high speed USB device using ehci_hcd and address 22 usb 2-2.1.1: configuration #1 chosen from 1 choice scsi10 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 22 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 10:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 scsi 10:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 sd 10:0:0:0: Attached scsi generic sg2 type 0 sd 10:0:0:1: Attached scsi generic sg3 type 0 sd 10:0:0:0: [sdb] Attached SCSI removable disk sd 10:0:0:1: [sdc] Attached SCSI removable disk [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1 [drm] 2: conflicting encoders switching off 9-pin DIN-1 [drm] in favor of DVI-I-1