Linux version 2.6.32-39288-g45fa67f (andy@nf7) (gcc version 4.2.3) #6 PREEMPT Thu Feb 18 11:32:35 GMT 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000003fff0000 (usable) user: 000000003fff0000 - 000000003fff3000 (ACPI NVS) user: 000000003fff3000 - 0000000040000000 (ACPI data) user: 00000000fec00000 - 00000000fec01000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x3fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-AFFFF uncachable B0000-BFFFF write-combining C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 0C0000000 mask FF0000000 write-combining 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled Warning only 895MB will be used. Use a HIGHMEM enabled kernel. initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-0000000037fa2000 0000000000 - 0000400000 page 4k 0000400000 - 0037c00000 page 2M 0037c00000 - 0037fa2000 page 4k kernel direct mapping tables up to 37fa2000 @ 10000-15000 ACPI: RSDP 000f7430 00014 (v00 Nvidia) ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 3fff30c0 048A0 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000D) ACPI: FACS 3fff0000 00040 ACPI: APIC 3fff7980 0005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 895MB LOWMEM available. mapped low ram: 0 - 37fa2000 low ram: 0 - 37fa2000 node 0 low ram: 00000000 - 37fa2000 node 0 bootmap 00011000 - 00017ff8 (6 early reservations) ==> bootmem [0000000000 - 0037fa2000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 000155d52c] TEXT DATA BSS ==> [0001000000 - 000155d52c] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #3 [000155e000 - 00015640be] BRK ==> [000155e000 - 00015640be] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #5 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x00037fa2 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00037fa2 On node 0 totalpages: 229169 free_area_init_node: node 0, pgdat c1476460, node_mem_map c1565200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223426 pages, LIFO batch:31 Using APIC driver default Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227377 Kernel command line: root=/dev/hda12 mem=1048512K PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 903080k/917128k available (3410k kernel code, 13508k reserved, 1182k data, 324k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) vmalloc : 0xf87a2000 - 0xfffa2000 ( 120 MB) lowmem : 0xc0000000 - 0xf7fa2000 ( 895 MB) .init : 0xc147d000 - 0xc14ce000 ( 324 kB) .data : 0xc1354a10 - 0xc147c498 (1182 kB) .text : 0xc1000000 - 0xc1354a10 (3410 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:288 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2126.722 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4253.44 BogoMIPS (lpj=2126722) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) mce: CPU supports 4 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f CPU: AMD Athlon(tm) stepping 00 Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup pci 0000:00:01.1: reg 10 io port: [0xe000-0xe01f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xe4080000-0xe4080fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xe4083000-0xe4083fff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: reg 10 32bit mmio: [0xe4086000-0xe40860ff] pci 0000:00:02.2: supports D1 D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:04.0: reg 10 32bit mmio: [0xe4087000-0xe4087fff] pci 0000:00:04.0: reg 14 io port: [0xe400-0xe407] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: reg 10 32bit mmio: [0xe4000000-0xe407ffff] pci 0000:00:05.0: supports D1 D2 pci 0000:00:06.0: reg 10 io port: [0xd000-0xd0ff] pci 0000:00:06.0: reg 14 io port: [0xd400-0xd47f] pci 0000:00:06.0: reg 18 32bit mmio: [0xe4081000-0xe4081fff] pci 0000:00:06.0: supports D1 D2 pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] pci 0000:00:0d.0: reg 10 32bit mmio: [0xe4084000-0xe40847ff] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe4085000-0xe408503f] pci 0000:00:0d.0: supports D1 D2 pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:01:07.0: reg 10 32bit mmio: [0xe3001000-0xe30013ff] pci 0000:01:07.0: supports D1 D2 pci 0000:00:08.0: bridge io port: [0xa000-0xbfff] pci 0000:00:08.0: bridge 32bit mmio: [0xe2000000-0xe3ffffff] pci 0000:02:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 14 io port: [0xc000-0xc0ff] pci 0000:02:00.0: reg 18 32bit mmio: [0xe1000000-0xe100ffff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized PCI: Using ACPI for IRQ routing Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:00: ioport range 0x4000-0x407f has been reserved system 00:00: ioport range 0x4080-0x40ff has been reserved system 00:00: ioport range 0x4400-0x447f has been reserved system 00:00: ioport range 0x4480-0x44ff has been reserved system 00:00: ioport range 0x4200-0x427f has been reserved system 00:00: ioport range 0x4280-0x42ff has been reserved system 00:01: ioport range 0x5000-0x503f has been reserved system 00:01: ioport range 0x5100-0x513f has been reserved system 00:02: iomem range 0xf0000-0xf3fff could not be reserved system 00:02: iomem range 0xf4000-0xf7fff could not be reserved system 00:02: iomem range 0xf8000-0xfbfff could not be reserved system 00:02: iomem range 0xfc000-0xfffff could not be reserved system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved system 00:02: iomem range 0xffff0000-0xffffffff has been reserved system 00:02: iomem range 0x0-0x9ffff could not be reserved system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved system 00:04: ioport range 0xb78-0xb7b has been reserved system 00:04: ioport range 0xf78-0xf7b has been reserved system 00:04: ioport range 0xa78-0xa7b has been reserved system 00:04: ioport range 0xe78-0xe7b has been reserved system 00:04: ioport range 0xbbc-0xbbf has been reserved system 00:04: ioport range 0xfbc-0xfbf has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0x294-0x297 has been reserved pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 pci 0000:00:08.0: IO window: 0xa000-0xbfff pci 0000:00:08.0: MEM window: 0xe2000000-0xe3ffffff pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xc000-0xcfff pci 0000:00:1e.0: MEM window: 0xe0000000-0xe1ffffff pci 0000:00:1e.0: PREFETCH window: 0xd0000000-0xdfffffff pci 0000:00:08.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff] pci_bus 0000:01: resource 1 mem: [0xe2000000-0xe3ffffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe1ffffff] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:02:00.0: Boot video device audit: initializing netlink socket (disabled) type=2000 audit(1266506358.213:1): initialized SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled msgmni has been set to 1764 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) processor LNXCPU:00: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (45 C) lp: driver loaded but no devices found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport_pc 00:0c: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver amd74xx 0000:00:09.0: UDMA133 controller amd74xx 0000:00:09.0: IDE controller (0x10de:0x0065 rev 0xa2) amd74xx 0000:00:09.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:09.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:09.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007 ide1: BM-DMA at 0xf008-0xf00f Probing IDE interface ide0... hda: Maxtor 6Y060L0, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/133 mode selected Probing IDE interface ide1... hdc: WDC WD800BB-00JHC0, ATA DISK drive hdd: HL-DT-STDVD-RAM GSA-H55L, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/66 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 128KiB hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > hdc: max request size: 128KiB hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 > ide-cd driver 5.00 ide-cd: hdd: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 22 (level, high) -> IRQ 22 ohci1394 0000:00:0d.0: setting latency timer to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[e4084000-e40847ff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: raw1394: /dev/raw1394 device initialized PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.21. ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /class/input/input2 EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 3:12. Freeing unused kernel memory: 324k freed Write protecting the kernel text: 3412k Write protecting the kernel read-only data: 936k kjournald starting. Commit interval 5 seconds ohci1394: fw-host0: SelfID received outside of bus reset sequence forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 21 (level, high) -> IRQ 21 forcedeth 0000:00:04.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000508df04206] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:50:8d:f1:42:06 forcedeth 0000:00:04.0: timirq lnktim desc-v1 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20 Intel ICH 0000:00:06.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50939 usecs (2472 samples) intel8x0: clocking to 47477 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 22, io mem 0xe4080000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21 ohci_hcd 0000:00:02.1: setting latency timer to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.1: irq 21, io mem 0xe4083000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft IntelliMouse® Explorer as /class/input/input3 generic-usb 0003:045E:001E.0001: input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:02.0-1/input0 Linux agpgart interface v0.103 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20 ehci_hcd 0000:00:02.2: setting latency timer to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: cache line size of 64 is not supported ehci_hcd 0000:00:02.2: irq 20, io mem 0xe4086000 usb 1-1: USB disconnect, address 2 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected agpgart: Detected NVIDIA nForce2 chipset agpgart-nvidia 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Linux video capture interface: v2.00 usb 1-1: new low speed USB device using ohci_hcd and address 3 saa7130/34: v4l2 driver version 0.2.15 loaded ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 saa7134 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 19, latency: 32, mmio: 0xe3001000 saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected] saa7134[0]: board init: gpio is c806000 IRQ 19/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs usb 1-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft IntelliMouse® Explorer as /class/input/input4 generic-usb 0003:045E:001E.0002: input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:02.0-1/input0 saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 60: 0c 22 17 44 02 96 47 0f ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 70: 00 30 8d 15 11 90 ff ff 74 b0 ff ff ff ff ff ff saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff i2c i2c-0: Invalid 7-bit address 0x7a tuner 0-0043: chip found @ 0x86 (saa7134[0]) tda9887 0-0043: creating new instance tda9887 0-0043: tda988[5/6/7] found Chip ID is not zero. It is not a TEA5767 tuner 0-0060: chip found @ 0xc0 (saa7134[0]) mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=22 mt20xx 0-0060: microtune MT2050 found, OK saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 dvb_init() allocating 1 frontend Adding 538136k swap on /dev/hda5. Priority:1 extents:1 across:538136k DVB: registering new adapter (saa7134[0]) DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... EXT3 FS on hda12, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with writeback data mode. [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. radeon 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xE1000000 [drm] register mmio size: 65536 ATOM BIOS: [drm] Clocks initialized ! [drm] 4 Power State(s) [drm] State 0 Default (default) [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 669000/829000 [drm] 1 engine/memory: 669000/829000 [drm] 2 engine/memory: 669000/829000 [drm] State 1 Performance [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 300000/829000 [drm] 1 engine/memory: 300000/829000 [drm] 2 engine/memory: 669000/829000 [drm] State 2 Performance [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 300000/829000 [drm] 1 engine/memory: 300000/829000 [drm] 2 engine/memory: 669000/829000 [drm] State 3 Default [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 669000/829000 [drm] 1 engine/memory: 669000/829000 [drm] 2 engine/memory: 669000/829000 [drm] radeon: dynamic power management enabled [drm] radeon: power management initialized [drm] AGP mode requested: 8 agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode radeon 0000:02:00.0: putting AGP V3 device into 8x mode radeon 0000:02:00.0: GTT: 256M 0xC0000000 - 0xCFFFFFFF radeon 0000:02:00.0: VRAM: 256M 0xB0000000 - 0xBFFFFFFF (256M used) [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 451746 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 256M of GTT memory ready. [drm] radeon: irq initialized. [drm] GART: num cpu pages 65536, num gpu pages 65536 [drm] Loading RV670 Microcode platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RV670_me.bin platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [drm] ring test succeeded in 0 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support [drm] Default TV standard: PAL [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] DIN [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] HPD2 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_LVTM1 [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] fb mappable at 0xD00C1000 [drm] vram apper at 0xD0000000 [drm] size 3145728 [drm] fb depth is 24 [drm] pitch is 4096 Console: switching to colour frame buffer device 128x48 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0 [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00010002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00050002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit You have old & broken userspace please consider updating mesa [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00010002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00010002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at exit [drm] Requested: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00020002 at entry [drm] Setting: eng: 66900; mem: 82900; lanes: 16 [drm] not in vbl for pm change 00000000 00010002 at exit