Linux version 2.6.32-39288-g45fa67f-dirty (root@totmacher) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sat Feb 20 01:07:42 CET 2010 Command line: root=/dev/disk/by-uuid/0ac7340b-c1ad-4c6b-9d9f-c73e65e3f10f ro KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000098400 (usable) BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable) BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.4 present. last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 base 0000CFE00000 mask FFFFFFE00000 uncachable 4 base 000100000000 mask FFFFE0000000 write-back 5 base 000120000000 mask FFFFF0000000 write-back 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfd81 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 0000000000098400 (usable) modified: 0000000000098400 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cfd81000 (usable) modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) modified: 00000000cfdf0000 - 00000000cfe00000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000130000000 (usable) initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfd81000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfc00000 page 2M 00cfc00000 - 00cfd81000 page 4k kernel direct mapping tables up to cfd81000 @ 8000-b000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ a000-c000 RAMDISK: 37e30000 - 37fef8f8 ACPI: RSDP 00000000000f5fb0 00014 (v00 GBT ) ACPI: RSDT 00000000cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000cfde30c0 06E92 (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000cfde0000 00040 ACPI: HPET 00000000cfdea040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000cfdea080 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 00000000cfdea0c0 0039A (v01 GBT GBT B0 5455312E BG?? 53450101) ACPI: APIC 00000000cfde9f80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001697718] TEXT DATA BSS ==> [0001000000 - 0001697718] #3 [0037e30000 - 0037fef8f8] RAMDISK ==> [0037e30000 - 0037fef8f8] #4 [0000098400 - 0000100000] BIOS reserved ==> [0000098400 - 0000100000] #5 [0001698000 - 00016980fe] BRK ==> [0001698000 - 00016980fe] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] found SMP MP-table at [ffff8800000f45a0] f45a0 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x00000098 0: 0x00000100 -> 0x000cfd81 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1047828 DMA zone: 56 pages used for memmap DMA zone: 109 pages reserved DMA zone: 3822 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 832953 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 0000000000098000 - 0000000000099000 PM: Registered nosave memory: 0000000000099000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000 PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) Booting paravirtualized kernel on bare hardware NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880005400000 s88920 r8192 d21672 u524288 pcpu-alloc: s88920 r8192 d21672 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030695 Kernel command line: root=/dev/disk/by-uuid/0ac7340b-c1ad-4c6b-9d9f-c73e65e3f10f ro PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 9020000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 4049920k/4980736k available (3288k kernel code, 789424k absent, 140484k reserved, 1743k data, 484k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:768 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 3415.258 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6833.11 BogoMIPS (lpj=11384176) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 00cfe00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6832.84 BogoMIPS (lpj=11383758) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6832.84 BogoMIPS (lpj=11383756) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6832.84 BogoMIPS (lpj=11383755) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (27332.65 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-3 level MC groups: 0 1 2 3 CPU1 attaching sched-domain: domain 0: span 0-3 level MC groups: 1 2 3 0 CPU2 attaching sched-domain: domain 0: span 0-3 level MC groups: 2 3 0 1 CPU3 attaching sched-domain: domain 0: span 0-3 level MC groups: 3 0 1 2 NET: Registered protocol family 16 node 0 link 0: io port [c000, ffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] TOM2: 0000000130000000 aka 4864M bus: [00,03] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [d0000000, dfffffff] bus: 00 index 3 mmio: [e0400000, ffffffff] bus: 00 index 4 mmio: [e0100000, e03fffff] bus: 00 index 5 mmio: [130000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdfc0000-0xfdfdffff] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xfdffc000-0xfdffffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:03.0: bridge io port: [0xe000-0xefff] pci 0000:00:03.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdbff000-0xfdbfffff] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdbf8000-0xfdbfbfff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] pci 0000:00:00.0: BAR 3: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet: hpet2 irq 24 for MSI Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: mem resource (0xd4400-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:09: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:09: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:09: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x220-0x225 has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:02: ioport range 0x4100-0x411f has been reserved system 00:02: ioport range 0x228-0x22f has been reserved system 00:02: ioport range 0x40b-0x40b has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:02: ioport range 0xc00-0xc01 has been reserved system 00:02: ioport range 0xc14-0xc14 has been reserved system 00:02: ioport range 0xc50-0xc52 has been reserved system 00:02: ioport range 0xc6c-0xc6d has been reserved system 00:02: ioport range 0xc6f-0xc6f has been reserved system 00:02: ioport range 0xcd0-0xcd1 has been reserved system 00:02: ioport range 0xcd2-0xcd3 has been reserved system 00:02: ioport range 0xcd4-0xcdf has been reserved system 00:02: ioport range 0x4000-0x40fe has been reserved system 00:02: ioport range 0x4210-0x4217 has been reserved system 00:02: ioport range 0xb00-0xb0f has been reserved system 00:02: ioport range 0xb10-0xb1f has been reserved system 00:02: ioport range 0xb20-0xb3f has been reserved system 00:08: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xcfde0000-0xcfdfffff could not be reserved system 00:09: iomem range 0xffff0000-0xffffffff has been reserved system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: 0xe000-0xefff pci 0000:00:03.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0xd000-0xdfff pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:0a.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 pci 0000:00:14.4: IO window: 0xc000-0xcfff pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Unpacking initramfs... Freeing initrd memory: 1790k freed PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1266676292.562:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7915 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:03.0: irq 25 for MSI/MSI-X pcieport 0000:00:03.0: setting latency timer to 64 pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X pcieport 0000:00:0a.0: setting latency timer to 64 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 484k freed SCSI subsystem initialized libata version 3.00 loaded. pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi0 : pata_atiixp scsi1 : pata_atiixp ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 ata6: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66, ATAPI AN ata5.00: configured for UDMA/66 ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7 ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata7.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 ata7.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: HPA detected: current 1465147055, native 1465149168 ata4.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133 ata4.00: 1465147055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5 scsi 4:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5 scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 3:0:0:0: [sdb] 1465147055 512-byte logical blocks: (750 GB/698 GiB) sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sda2 sda3 sd 2:0:0:0: [sda] Attached SCSI disk sdb1 sd 3:0:0:0: [sdb] Attached SCSI disk sdc1 sdc2 sdc3 sd 6:0:0:0: [sdc] Attached SCSI disk sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 EXT4-fs (sdc2): mounted filesystem with ordered data mode Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs udev: starting version 151 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 27 for MSI/MSI-X eth0: RTL8168d/8111d at 0xffffc90010168000, 00:24:1d:cf:df:f9, XID 083000c0 IRQ 27 input: PC Speaker as /devices/platform/pcspkr/input/input1 sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 sr 4:0:0:0: Attached scsi generic sg2 type 5 sd 6:0:0:0: Attached scsi generic sg3 type 0 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver EDAC MC: Ver: 2.1.0 Feb 20 2010 [drm] Initialized drm 1.1.0 20060810 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb EDAC amd64_edac: Ver: 3.2.0 Feb 20 2010 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 radeon 0000:01:00.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFDFC0000 [drm] register mmio size: 131072 ATOM BIOS: 6899.12.11.0.6.AS01 [drm] Clocks initialized ! [drm] 1 Power State(s) [drm] State 0 Default (default) [drm] 16 PCIE Lanes [drm] 1 Clock Mode(s) [drm] 0 engine/memory: 400000/900000 [drm] radeon: power management initialized radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used) radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 2026552 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Radeon Display Connectors [drm] Connector 0: [drm] DisplayPort [drm] HPD4 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] HDMI-A [drm] HPD5 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 3: [drm] DVI-I [drm] HPD6 [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [drm] Encoders: [drm] DFP4: INTERNAL_UNIPHY [drm] CRT1: INTERNAL_KLDSCP_DAC1 hub 1-0:1.0: unable to enumerate USB device on port 1 hda_codec: ALC889: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4 ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 usb 1-2: new high speed USB device using ehci_hcd and address 3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [drm] fb mappable at 0xD0040000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 Console: switching to colour frame buffer device 240x67 usb 1-2: configuration #1 chosen from 1 choice fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:01:00.1: setting latency timer to 64 Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 6-2: new full speed USB device using ohci_hcd and address 2 usb 6-2: configuration #1 chosen from 1 choice usb 6-3: new full speed USB device using ohci_hcd and address 3 usb 6-3: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input5 generic-usb 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-3/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input6 generic-usb 0003:046D:C529.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 2-1: new full speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input7 generic-usb 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input0 input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.1/input/input8 generic-usb 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input1 EXT4-fs (sdc3): mounted filesystem with ordered data mode Adding 16386260k swap on /dev/sdc1. Priority:-1 extents:1 across:16386260k scsi 8:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS sd 8:0:0:0: Attached scsi generic sg4 type 0 sd 8:0:0:0: [sdd] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB) sd 8:0:0:0: [sdd] Write Protect is off sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00 sd 8:0:0:0: [sdd] Assuming drive cache: write through sd 8:0:0:0: [sdd] Assuming drive cache: write through usb-storage: device scan complete sdd: sdd1 sd 8:0:0:0: [sdd] Assuming drive cache: write through sd 8:0:0:0: [sdd] Attached SCSI removable disk r8169: eth0: link up r8169: eth0: link up Slow work thread pool: Starting up Slow work thread pool: Ready NET: Registered protocol family 10 lo: Disabled Privacy Extensions CIFS VFS: Error connecting to socket. Aborting operation CIFS VFS: cifs_mount failed w/return code = -101 CIFS VFS: Error connecting to socket. Aborting operation CIFS VFS: cifs_mount failed w/return code = -101 CIFS VFS: Error connecting to socket. Aborting operation CIFS VFS: cifs_mount failed w/return code = -101 eth0: no IPv6 routers present