--- lspci --- --- lspci --- 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series 03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5300 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) --- dmesg --- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33-gentoo (root@madsr) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Feb 25 11:50:49 CET 2010 [ 0.000000] Command line: root=/dev/sda3 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable) [ 0.000000] BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved) [ 0.000000] BIOS-e820: 00000000bf8a7000 - 00000000bf9b8000 (usable) [ 0.000000] BIOS-e820: 00000000bf9b8000 - 00000000bfa0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable) [ 0.000000] BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved) [ 0.000000] BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved) [ 0.000000] BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable) [ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 13C000000 mask FFC000000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf8a1000 (usable) [ 0.000000] modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved) [ 0.000000] modified: 00000000bf8a7000 - 00000000bf9b8000 (usable) [ 0.000000] modified: 00000000bf9b8000 - 00000000bfa0f000 (reserved) [ 0.000000] modified: 00000000bfa0f000 - 00000000bfac6000 (usable) [ 0.000000] modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS) [ 0.000000] modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data) [ 0.000000] modified: 00000000bfad4000 - 00000000bfad8000 (reserved) [ 0.000000] modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS) [ 0.000000] modified: 00000000bfadc000 - 00000000bfadf000 (reserved) [ 0.000000] modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS) [ 0.000000] modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data) [ 0.000000] modified: 00000000bfb08000 - 00000000bfd0f000 (reserved) [ 0.000000] modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS) [ 0.000000] modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data) [ 0.000000] modified: 00000000bfdff000 - 00000000bfe00000 (usable) [ 0.000000] modified: 00000000bfe00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe00000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] kernel direct mapping tables up to bfe00000 @ 16000-1a000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ 18000-1e000 [ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bfd49c22 00094 (v01 LENOVO TP-7V 00003120 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfd49d00 000F4 (v03 LENOVO TP-7V 00003120 LNVO 00000001) [ 0.000000] ACPI: DSDT 00000000bfd4a10e 0FAC1 (v01 LENOVO TP-7V 00003120 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bfd8e000 00040 [ 0.000000] ACPI: SSDT 00000000bfd49eb4 0025A (v01 LENOVO TP-7V 00003120 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bfd59bcf 00052 (v01 LENOVO TP-7V 00003120 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bfd59c21 00078 (v01 LENOVO TP-7V 00003120 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bfd59c99 0003C (v01 LENOVO TP-7V 00003120 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bfd59cd5 00038 (v01 LENOVO TP-7V 00003120 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bfd59e62 00176 (v01 LENOVO TP-7V 00003120 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfd59fd8 00028 (v01 LENOVO TP-7V 00003120 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfd8d1fa 00568 (v01 LENOVO TP-7V 00003120 INTL 20050513) [ 0.000000] ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bfb06000 000C8 (v01 ? 00000001 00000000) [ 0.000000] ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013c000000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000013c000000 [ 0.000000] NODE_DATA [0000000000019000 - 000000000001dfff] [ 0.000000] bootmap [000000000001e000 - 00000000000457ff] pages 28 [ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 013c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 0001c6ba84] TEXT DATA BSS ==> [0001000000 - 0001c6ba84] [ 0.000000] #2 [0001c6c000 - 0001c6c14c] BRK ==> [0001c6c000 - 0001c6c14c] [ 0.000000] #3 [00000f6490 - 0000100000] BIOS reserved ==> [00000f6490 - 0000100000] [ 0.000000] #4 [00000f6480 - 00000f6490] MP-table mpf ==> [00000f6480 - 00000f6490] [ 0.000000] #5 [000009ec00 - 000009f171] BIOS reserved ==> [000009ec00 - 000009f171] [ 0.000000] #6 [000009f285 - 00000f6480] BIOS reserved ==> [000009f285 - 00000f6480] [ 0.000000] #7 [000009f171 - 000009f285] MP-table mpc ==> [000009f171 - 000009f285] [ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] [ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] [ 0.000000] #10 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000] [ 0.000000] #11 [0000018000 - 0000019000] PGTABLE ==> [0000018000 - 0000019000] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bf8a1 [ 0.000000] 0: 0x000bf8a7 -> 0x000bf9b8 [ 0.000000] 0: 0x000bfa0f -> 0x000bfac6 [ 0.000000] 0: 0x000bfdff -> 0x000bfe00 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1030649 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 106 pages reserved [ 0.000000] DMA zone: 3821 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 766626 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000 [ 0.000000] PM: Registered nosave memory: 00000000bf9b8000 - 00000000bfa0f000 [ 0.000000] PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000 [ 0.000000] PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000 [ 0.000000] PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000 [ 0.000000] PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000 [ 0.000000] PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000 [ 0.000000] PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000 [ 0.000000] PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000 [ 0.000000] PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000 [ 0.000000] PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000 [ 0.000000] PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000 [ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028200000 s84568 r8192 d21928 u1048576 [ 0.000000] pcpu-alloc: s84568 r8192 d21928 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012847 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda3 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3986092k/5177344k available (5709k kernel code, 1054748k absent, 136504k reserved, 5422k data, 692k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2527.107 MHz processor. [ 0.002005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.21 BogoMIPS (lpj=2527107) [ 0.002297] Security Framework initialized [ 0.002437] SELinux: Initializing. [ 0.002581] SELinux: Starting in permissive mode [ 0.003005] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005182] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006278] Mount-cache hash table entries: 256 [ 0.006568] Initializing cgroup subsys ns [ 0.006713] Initializing cgroup subsys cpuacct [ 0.006855] Initializing cgroup subsys freezer [ 0.007026] CPU: Physical Processor ID: 0 [ 0.007166] CPU: Processor Core ID: 0 [ 0.007306] mce: CPU supports 6 MCE banks [ 0.007450] CPU0: Thermal monitoring enabled (TM2) [ 0.007589] using mwait in idle threads. [ 0.007727] Performance Events: Core2 events, Intel PMU driver. [ 0.007972] ... version: 2 [ 0.008002] ... bit width: 40 [ 0.008139] ... generic registers: 2 [ 0.008278] ... value mask: 000000ffffffffff [ 0.008418] ... max period: 000000007fffffff [ 0.008558] ... fixed-purpose events: 3 [ 0.008697] ... event mask: 0000000700000003 [ 0.011267] ACPI: Core revision 20091214 [ 0.033079] DMAR: Host address width 36 [ 0.033217] DMAR: DRHD base: 0x000000feb03000 flags: 0x0 [ 0.033362] IOMMU feb03000: ver 1:0 cap c9008020e30260 ecap 1000 [ 0.034003] DMAR: DRHD base: 0x000000feb00000 flags: 0x0 [ 0.034145] IOMMU feb00000: ver 1:0 cap c0000020630270 ecap 1000 [ 0.034285] DMAR: DRHD base: 0x000000feb02000 flags: 0x1 [ 0.034427] IOMMU feb02000: ver 1:0 cap c9008020630260 ecap 1000 [ 0.034566] DMAR: RMRR base: 0x000000fc225c00 end: 0x000000fc2263ff [ 0.034704] DMAR: No ATSR found [ 0.034848] Setting APIC routing to flat [ 0.035346] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.045584] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.045999] Booting Node 0, Processors #1 Ok. [ 0.117018] Brought up 2 CPUs [ 0.117157] Total of 2 processors activated (10107.93 BogoMIPS). [ 0.118145] khelper used greatest stack depth: 6208 bytes left [ 0.118562] Time: 12:49:30 Date: 03/01/10 [ 0.118761] NET: Registered protocol family 16 [ 0.119185] khelper used greatest stack depth: 5896 bytes left [ 0.119427] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.119649] ACPI: bus type pci registered [ 0.119886] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.120002] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.124760] PCI: Using configuration type 1 for base access [ 0.132545] bio: create slab at 0 [ 0.135095] ACPI: EC: EC description table is found, configuring boot EC [ 0.145093] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.155837] ACPI: Interpreter enabled [ 0.155977] ACPI: (supports S0 S3 S4 S5) [ 0.156316] ACPI: Using IOAPIC for interrupt routing [ 0.172222] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.172566] ACPI: Power Resource [PUBS] (on) [ 0.175871] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.176456] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.176642] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.176885] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.176888] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.176890] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.176893] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.176895] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.176898] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) [ 0.176925] DMAR: Forcing write-buffer flush capability [ 0.177049] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.177052] pci 0000:00:01.0: PME# disabled [ 0.177080] pci 0000:00:03.0: reg 10: [mem 0xfc225800-0xfc22580f 64bit] [ 0.177110] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.177113] pci 0000:00:03.0: PME# disabled [ 0.177195] pci 0000:00:19.0: reg 10: [mem 0xfc200000-0xfc21ffff] [ 0.177202] pci 0000:00:19.0: reg 14: [mem 0xfc224000-0xfc224fff] [ 0.177209] pci 0000:00:19.0: reg 18: [io 0x1800-0x181f] [ 0.177262] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.177266] pci 0000:00:19.0: PME# disabled [ 0.177324] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] [ 0.177407] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] [ 0.177490] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f] [ 0.177569] pci 0000:00:1a.7: reg 10: [mem 0xfc225c00-0xfc225fff] [ 0.177632] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.177638] pci 0000:00:1a.7: PME# disabled [ 0.177681] pci 0000:00:1b.0: reg 10: [mem 0xfc220000-0xfc223fff 64bit] [ 0.177738] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.177742] pci 0000:00:1b.0: PME# disabled [ 0.177831] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.177835] pci 0000:00:1c.0: PME# disabled [ 0.178007] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.178011] pci 0000:00:1c.1: PME# disabled [ 0.178106] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.178110] pci 0000:00:1c.3: PME# disabled [ 0.178203] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.178207] pci 0000:00:1c.4: PME# disabled [ 0.178275] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f] [ 0.178358] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf] [ 0.178439] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df] [ 0.178519] pci 0000:00:1d.7: reg 10: [mem 0xfc226000-0xfc2263ff] [ 0.178583] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.178588] pci 0000:00:1d.7: PME# disabled [ 0.178811] pci 0000:00:1f.2: reg 10: [io 0x1c10-0x1c17] [ 0.178819] pci 0000:00:1f.2: reg 14: [io 0x1c04-0x1c07] [ 0.178826] pci 0000:00:1f.2: reg 18: [io 0x1c08-0x1c0f] [ 0.178833] pci 0000:00:1f.2: reg 1c: [io 0x1c00-0x1c03] [ 0.178840] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] [ 0.178847] pci 0000:00:1f.2: reg 24: [mem 0xfc225000-0xfc2257ff] [ 0.178892] pci 0000:00:1f.2: PME# supported from D3hot [ 0.178896] pci 0000:00:1f.2: PME# disabled [ 0.178934] pci 0000:00:1f.3: reg 10: [mem 0xfc226400-0xfc2264ff 64bit] [ 0.178952] pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f] [ 0.179010] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.179017] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.179024] pci 0000:01:00.0: reg 18: [mem 0xcfff0000-0xcfffffff] [ 0.179045] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.179071] pci 0000:01:00.0: supports D1 D2 [ 0.179130] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.179269] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.179272] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff] [ 0.179276] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.179331] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.179548] pci 0000:03:00.0: reg 10: [mem 0xf4200000-0xf4201fff 64bit] [ 0.179661] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.179668] pci 0000:03:00.0: PME# disabled [ 0.179741] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.179884] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff] [ 0.179944] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.180004] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.180008] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.180016] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.180071] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.180212] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.180217] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.180224] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.180266] pci 0000:15:00.0: reg 10: [mem 0xf4300000-0xf4300fff] [ 0.180294] pci 0000:15:00.0: supports D1 D2 [ 0.180295] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180300] pci 0000:15:00.0: PME# disabled [ 0.180342] pci 0000:15:00.1: reg 10: [mem 0xf4301000-0xf43017ff] [ 0.180411] pci 0000:15:00.1: supports D1 D2 [ 0.180413] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180418] pci 0000:15:00.1: PME# disabled [ 0.180460] pci 0000:15:00.2: reg 10: [mem 0xf4301800-0xf43018ff] [ 0.180529] pci 0000:15:00.2: supports D1 D2 [ 0.180531] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180536] pci 0000:15:00.2: PME# disabled [ 0.180577] pci 0000:15:00.3: reg 10: [mem 0xf4301c00-0xf4301cff] [ 0.180646] pci 0000:15:00.3: supports D1 D2 [ 0.180648] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180653] pci 0000:15:00.3: PME# disabled [ 0.180695] pci 0000:15:00.4: reg 10: [mem 0xf4302000-0xf43020ff] [ 0.180764] pci 0000:15:00.4: supports D1 D2 [ 0.180766] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180771] pci 0000:15:00.4: PME# disabled [ 0.180815] pci 0000:15:00.5: reg 10: [mem 0xf4302400-0xf43024ff] [ 0.180884] pci 0000:15:00.5: supports D1 D2 [ 0.180886] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180891] pci 0000:15:00.5: PME# disabled [ 0.181052] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.181195] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff] [ 0.181199] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff] [ 0.181207] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.181264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.181413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.181482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.181545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.181611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.181681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.181750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.189509] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.190310] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.191168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.192076] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.192914] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.193738] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.194569] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.195408] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.196170] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.196395] vgaarb: loaded [ 0.196670] SCSI subsystem initialized [ 0.196853] libata version 3.00 loaded. [ 0.197101] usbcore: registered new interface driver usbfs [ 0.197275] usbcore: registered new interface driver hub [ 0.197455] usbcore: registered new device driver usb [ 0.197941] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 0.198002] PCI: Using ACPI for IRQ routing [ 0.198140] PCI: pci_cache_line_size set to 64 bytes [ 0.198463] cfg80211: Using static regulatory domain info [ 0.198601] cfg80211: Regulatory domain: 00 [ 0.198739] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.199017] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 0.199157] (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 0.199297] (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 0.199436] (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 0.199576] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 0.199720] cfg80211: Calling CRDA to update world regulatory domain [ 0.199903] NetLabel: Initializing [ 0.200001] NetLabel: domain hash size = 128 [ 0.200138] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.200287] NetLabel: unlabeled traffic allowed by default [ 0.200492] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.200636] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.201025] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.204125] Switching to clocksource tsc [ 0.206215] pnp: PnP ACPI init [ 0.206359] ACPI: bus type pnp registered [ 0.269729] pnp: PnP ACPI: found 12 devices [ 0.269868] ACPI: ACPI bus type pnp unregistered [ 0.270012] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.270153] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved [ 0.270293] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved [ 0.270433] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.270573] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.270716] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.270856] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.270996] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.271136] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.271275] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.271414] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.271553] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.271691] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.271833] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.271972] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.272115] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.272252] system 00:02: [io 0x1180-0x11ff] has been reserved [ 0.272390] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.272528] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.272666] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.272807] system 00:02: [io 0x1680-0x169f] has been reserved [ 0.272945] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.273084] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.273222] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.273361] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.273500] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.273638] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.278474] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff] [ 0.278615] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.278840] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.279062] pci 0000:00:1c.0: BAR 7: assigned [io 0x9000-0x9fff] [ 0.279201] pci 0000:00:1c.1: BAR 7: assigned [io 0xa000-0xafff] [ 0.279341] pci 0000:01:00.0: BAR 6: assigned [mem 0xcff00000-0xcff1ffff pref] [ 0.279562] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.279712] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.279852] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff] [ 0.279993] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.282350] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.282490] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.282632] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.282776] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.283002] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.283142] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] [ 0.283285] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff] [ 0.283427] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.283652] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.283794] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.283937] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.284079] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.284305] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.284445] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.284588] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.284732] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.284960] pci 0000:15:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref] [ 0.285182] pci 0000:15:00.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff] [ 0.285322] pci 0000:15:00.0: BAR 7: assigned [io 0x5000-0x50ff] [ 0.285461] pci 0000:15:00.0: BAR 8: assigned [io 0x5400-0x54ff] [ 0.285600] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.285740] pci 0000:15:00.0: bridge window [io 0x5000-0x50ff] [ 0.285882] pci 0000:15:00.0: bridge window [io 0x5400-0x54ff] [ 0.286025] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.286250] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] [ 0.286393] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.286532] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff] [ 0.286674] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff] [ 0.286819] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.287050] alloc irq_desc for 16 on node -1 [ 0.287051] alloc kstat_irqs on node -1 [ 0.287055] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.287196] pci 0000:00:01.0: setting latency timer to 64 [ 0.287205] alloc irq_desc for 20 on node -1 [ 0.287206] alloc kstat_irqs on node -1 [ 0.287209] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.287351] pci 0000:00:1c.0: setting latency timer to 64 [ 0.287359] alloc irq_desc for 21 on node -1 [ 0.287361] alloc kstat_irqs on node -1 [ 0.287364] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.287506] pci 0000:00:1c.1: setting latency timer to 64 [ 0.287515] alloc irq_desc for 23 on node -1 [ 0.287516] alloc kstat_irqs on node -1 [ 0.287519] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.287661] pci 0000:00:1c.3: setting latency timer to 64 [ 0.287670] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.287815] pci 0000:00:1c.4: setting latency timer to 64 [ 0.287822] pci 0000:00:1e.0: setting latency timer to 64 [ 0.287834] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.287977] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.287979] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.287981] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.287983] pci_bus 0000:01: resource 1 [mem 0xcff00000-0xcfffffff] [ 0.287985] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.287987] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.287989] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.287991] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.287993] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 0.287995] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf42fffff] [ 0.287997] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.287999] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.288001] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.288003] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.288005] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff] [ 0.288007] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.288009] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.288011] pci_bus 0000:15: resource 0 [io 0x5000-0x8fff] [ 0.288013] pci_bus 0000:15: resource 1 [mem 0xf4300000-0xf7ffffff] [ 0.288015] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.288017] pci_bus 0000:15: resource 3 [io 0x0000-0xffff] [ 0.288019] pci_bus 0000:15: resource 4 [mem 0x00000000-0xffffffffffffffff] [ 0.288021] pci_bus 0000:16: resource 0 [io 0x5000-0x50ff] [ 0.288023] pci_bus 0000:16: resource 1 [io 0x5400-0x54ff] [ 0.288025] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.288027] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff] [ 0.288046] NET: Registered protocol family 2 [ 0.288298] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.289715] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.293451] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.294064] TCP: Hash tables configured (established 524288 bind 65536) [ 0.294205] TCP reno registered [ 0.294350] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.294523] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.294800] NET: Registered protocol family 1 [ 0.295060] RPC: Registered udp transport module. [ 0.295197] RPC: Registered tcp transport module. [ 0.295335] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.295497] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.295499] pci 0000:00:1a.0: Performing full reset [ 0.295518] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.295520] pci 0000:00:1a.1: Performing full reset [ 0.295539] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.295541] pci 0000:00:1a.2: Performing full reset [ 0.295604] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.295606] pci 0000:00:1d.0: Performing full reset [ 0.295625] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.295626] pci 0000:00:1d.1: Performing full reset [ 0.295647] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.295648] pci 0000:00:1d.2: Performing full reset [ 0.295702] pci 0000:01:00.0: Boot video device [ 0.295728] PCI: CLS 64 bytes, default 64 [ 0.295801] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.295941] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.296162] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.296624] Simple Boot Flag at 0x35 set to 0x1 [ 0.297613] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.297759] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.297936] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.298158] Scanning for low memory corruption every 60 seconds [ 0.298676] audit: initializing netlink socket (disabled) [ 0.298856] type=2000 audit(1267447770.298:1): initialized [ 0.310661] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.314057] fuse init (API version 7.13) [ 0.314385] msgmni has been set to 7785 [ 0.314608] SELinux: Registering netfilter hooks [ 0.316506] alg: No test for stdrng (krng) [ 0.320734] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 0.320957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.321178] io scheduler noop registered [ 0.321314] io scheduler deadline registered [ 0.321543] io scheduler cfq registered (default) [ 0.321784] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.321806] alloc irq_desc for 24 on node -1 [ 0.321808] alloc kstat_irqs on node -1 [ 0.321818] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.321938] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.321981] alloc irq_desc for 25 on node -1 [ 0.321983] alloc kstat_irqs on node -1 [ 0.321990] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.322139] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.322182] alloc irq_desc for 26 on node -1 [ 0.322183] alloc kstat_irqs on node -1 [ 0.322191] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.322339] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.322382] alloc irq_desc for 27 on node -1 [ 0.322384] alloc kstat_irqs on node -1 [ 0.322392] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.322543] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.322586] alloc irq_desc for 28 on node -1 [ 0.322588] alloc kstat_irqs on node -1 [ 0.322595] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.322826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.325587] Non-volatile memory driver v1.3 [ 0.325812] Linux agpgart interface v0.103 [ 0.326444] ACPI: AC Adapter [AC] (on-line) [ 0.326852] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.327249] ACPI: Lid Switch [LID] [ 0.327447] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.327673] ACPI: Sleep Button [SLPB] [ 0.327885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.328106] ACPI: Power Button [PWRF] [ 0.332322] acpi device:07: registered as cooling_device0 [ 0.332657] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input3 [ 0.332884] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 0.333564] ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.334755] ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.338253] Monitor-Mwait will be used to enter C-1 state [ 0.338270] Monitor-Mwait will be used to enter C-2 state [ 0.338286] Monitor-Mwait will be used to enter C-3 state [ 0.338292] Marking TSC unstable due to TSC halts in idle [ 0.338505] Switching to clocksource hpet [ 0.339110] ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.340133] ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.386883] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.387031] ACPI: Thermal Zone [THM0] (58 C) [ 0.388608] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.388751] ACPI: Thermal Zone [THM1] (57 C) [ 0.389223] [drm] Initialized drm 1.1.0 20060810 [ 0.389543] [drm] radeon defaulting to kernel modesetting. [ 0.389716] [drm] radeon kernel modesetting enabled. [ 0.390047] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 0.390263] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.390469] radeon 0000:01:00.0: setting latency timer to 64 [ 0.393054] [drm] radeon: Initializing kernel modesetting. [ 0.393465] [drm] register mmio base: 0xCFFF0000 [ 0.393640] [drm] register mmio size: 65536 [ 0.394053] ATOM BIOS: M82 [ 0.394258] [drm] Clocks initialized ! [ 0.395469] [drm] Detected VRAM RAM=256M, BAR=256M [ 0.395684] [drm] RAM width 64bits DDR [ 0.395957] [TTM] Zone kernel: Available graphics memory: 1993046 kiB. [ 0.396165] [drm] radeon: 256M of VRAM memory ready [ 0.396385] [drm] radeon: 512M of GTT memory ready. [ 0.396678] alloc irq_desc for 29 on node -1 [ 0.396680] alloc kstat_irqs on node -1 [ 0.396695] radeon 0000:01:00.0: irq 29 for MSI/MSI-X [ 0.396701] [drm] radeon: using MSI. [ 0.396974] [drm] radeon: irq initialized. [ 0.397194] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.398187] [drm] Loading RV620 Microcode [ 0.398405] platform radeon_cp.0: firmware: using built-in firmware radeon/RV620_pfp.bin [ 0.398696] platform radeon_cp.0: firmware: using built-in firmware radeon/RV620_me.bin [ 0.398987] platform radeon_cp.0: firmware: using built-in firmware radeon/R600_rlc.bin [ 0.402037] ACPI: Battery Slot [BAT0] (battery present) [ 0.432273] [drm] ring test succeeded in 1 usecs [ 0.432541] [drm] radeon: ib pool ready. [ 0.432751] [drm] ib test succeeded in 0 usecs [ 0.432889] [drm] Enabling audio support [ 0.433317] [drm] Radeon Display Connectors [ 0.433589] [drm] Connector 0: [ 0.433725] [drm] DVI-I [ 0.433861] [drm] HPD3 [ 0.433998] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 0.434223] [drm] Encoders: [ 0.434366] [drm] DFP1: INTERNAL_UNIPHY [ 0.434503] [drm] Connector 1: [ 0.434639] [drm] LVDS [ 0.434776] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74 [ 0.434997] [drm] Encoders: [ 0.435136] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [ 0.435279] [drm] Connector 2: [ 0.435415] [drm] VGA [ 0.435552] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 0.435772] [drm] Encoders: [ 0.435908] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.667086] [drm] fb mappable at 0xD0141000 [ 0.667224] [drm] vram apper at 0xD0000000 [ 0.667367] [drm] size 8294400 [ 0.667503] [drm] fb depth is 24 [ 0.667639] [drm] pitch is 7680 [ 1.432012] async/0 used greatest stack depth: 4664 bytes left [ 1.476155] Console: switching to colour frame buffer device 180x56 [ 1.478956] fb0: radeondrmfb frame buffer device [ 1.478957] registered panic notifier [ 1.479012] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 1.479135] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.480072] serial 00:0a: activated [ 1.480231] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.481972] brd: module loaded [ 1.482786] loop: module loaded [ 1.483065] ahci 0000:00:1f.2: version 3.0 [ 1.483081] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.483149] alloc irq_desc for 30 on node -1 [ 1.483151] alloc kstat_irqs on node -1 [ 1.483160] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 1.483196] ahci: SSS flag set, parallel bus scan disabled [ 1.483249] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.483293] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 1.483331] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.483501] scsi0 : ahci [ 1.483629] scsi1 : ahci [ 1.483738] scsi2 : ahci [ 1.483847] scsi3 : ahci [ 1.484583] ata1: SATA max UDMA/133 abar m2048@0xfc225000 port 0xfc225100 irq 30 [ 1.484620] ata2: SATA max UDMA/133 abar m2048@0xfc225000 port 0xfc225180 irq 30 [ 1.484654] ata3: DUMMY [ 1.484667] ata4: DUMMY [ 1.484784] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.484810] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 1.484866] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.484900] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.484988] alloc irq_desc for 31 on node -1 [ 1.484989] alloc kstat_irqs on node -1 [ 1.484999] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X [ 1.614477] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:dc:ed:16 [ 1.614513] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.614566] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff [ 1.614639] console [netcon0] enabled [ 1.614657] netconsole: network logging started [ 1.614736] Generic UIO driver for PCI 2.3 devices version: 0.01.0 [ 1.614827] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 1.789021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.791501] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded [ 1.791504] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out [ 1.792480] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded [ 1.792483] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out [ 1.840726] ata1.00: ATA-8: WDC WD3200BEVS-08VAT2, 14.01A14, max UDMA/133 [ 1.841694] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.846082] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded [ 1.846085] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out [ 1.847157] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded [ 1.847160] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out [ 1.851226] ata1.00: configured for UDMA/133 [ 1.868805] ata1.00: configured for UDMA/133 [ 1.869842] ata1: EH complete [ 1.870965] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVS-0 14.0 PQ: 0 ANSI: 5 [ 1.872247] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.873034] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.874556] sd 0:0:0:0: [sda] Write Protect is off [ 1.875710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.875731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.877056] sda: sda1 sda2 sda3 sda4 [ 1.891665] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.178020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.181895] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (unknown) succeeded [ 2.183164] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (unknown) succeeded [ 2.183167] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out [ 2.185886] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D2, max UDMA/100, ATAPI AN [ 2.190413] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (unknown) succeeded [ 2.191630] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (unknown) succeeded [ 2.191633] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out [ 2.194305] ata2.00: configured for UDMA/100 [ 2.208665] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D2 PQ: 0 ANSI: 5 [ 2.218922] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.220233] Uniform CD-ROM driver Revision: 3.20 [ 2.221665] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.221745] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.345802] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 2.347129] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 2.348449] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff [ 2.349772] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff [ 2.351096] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff [ 2.603147] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.604478] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 2.604660] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2.605977] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.607329] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.607333] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.608688] drivers/usb/core/inode.c: creating file 'devices' [ 2.608692] drivers/usb/core/inode.c: creating file '001' [ 2.608739] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.610089] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 2.610094] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 2.610123] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.611451] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.615326] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 2.615328] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 2.615341] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc225c00 [ 2.616683] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.620570] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 2.626010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.627362] usb usb1: default language 0x0409 [ 2.627368] usb usb1: udev 1, busnum 1, minor = 0 [ 2.627370] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.628728] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.630068] usb usb1: Product: EHCI Host Controller [ 2.631419] usb usb1: Manufacturer: Linux 2.6.33-gentoo ehci_hcd [ 2.632748] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.634101] usb usb1: uevent [ 2.634131] usb usb1: usb_probe_device [ 2.634134] usb usb1: configuration #1 chosen from 1 choice [ 2.634140] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.634152] usb 1-0:1.0: uevent [ 2.634181] hub 1-0:1.0: usb_probe_interface [ 2.634183] hub 1-0:1.0: usb_probe_interface - got id [ 2.634185] hub 1-0:1.0: USB hub found [ 2.635518] hub 1-0:1.0: 6 ports detected [ 2.636845] hub 1-0:1.0: standalone hub [ 2.636846] hub 1-0:1.0: no power switching (usb 1.0) [ 2.636848] hub 1-0:1.0: individual port over-current protection [ 2.636849] hub 1-0:1.0: power on to power good time: 20ms [ 2.636853] hub 1-0:1.0: local power source is good [ 2.636855] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.636885] drivers/usb/core/inode.c: creating file '001' [ 2.637061] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2.638392] alloc irq_desc for 19 on node -1 [ 2.638394] alloc kstat_irqs on node -1 [ 2.638398] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.639743] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.639746] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.641087] drivers/usb/core/inode.c: creating file '002' [ 2.641138] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.642482] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 2.642486] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 2.642511] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.643819] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.647703] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.647705] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 2.647718] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc226000 [ 2.649032] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.652919] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 2.659011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.660350] usb usb2: default language 0x0409 [ 2.660355] usb usb2: udev 1, busnum 2, minor = 128 [ 2.660357] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.661676] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.662990] usb usb2: Product: EHCI Host Controller [ 2.664300] usb usb2: Manufacturer: Linux 2.6.33-gentoo ehci_hcd [ 2.665619] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.666963] usb usb2: uevent [ 2.666993] usb usb2: usb_probe_device [ 2.666995] usb usb2: configuration #1 chosen from 1 choice [ 2.667000] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.667020] usb 2-0:1.0: uevent [ 2.667048] hub 2-0:1.0: usb_probe_interface [ 2.667050] hub 2-0:1.0: usb_probe_interface - got id [ 2.667051] hub 2-0:1.0: USB hub found [ 2.668386] hub 2-0:1.0: 6 ports detected [ 2.669706] hub 2-0:1.0: standalone hub [ 2.669707] hub 2-0:1.0: no power switching (usb 1.0) [ 2.669709] hub 2-0:1.0: individual port over-current protection [ 2.669710] hub 2-0:1.0: power on to power good time: 20ms [ 2.669714] hub 2-0:1.0: local power source is good [ 2.669716] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.669745] drivers/usb/core/inode.c: creating file '001' [ 2.669790] uhci_hcd: USB Universal Host Controller Interface driver [ 2.671300] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2.672613] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.673928] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.673931] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.675240] drivers/usb/core/inode.c: creating file '003' [ 2.675285] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.676593] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.677871] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.677873] uhci_hcd 0000:00:1a.0: Performing full reset [ 2.677888] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 2.677899] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 2.679203] usb usb3: default language 0x0409 [ 2.679209] usb usb3: udev 1, busnum 3, minor = 256 [ 2.679211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.680483] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.681742] usb usb3: Product: UHCI Host Controller [ 2.682999] usb usb3: Manufacturer: Linux 2.6.33-gentoo uhci_hcd [ 2.684252] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.685518] usb usb3: uevent [ 2.685547] usb usb3: usb_probe_device [ 2.685549] usb usb3: configuration #1 chosen from 1 choice [ 2.685554] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.685567] usb 3-0:1.0: uevent [ 2.685595] hub 3-0:1.0: usb_probe_interface [ 2.685596] hub 3-0:1.0: usb_probe_interface - got id [ 2.685598] hub 3-0:1.0: USB hub found [ 2.686820] hub 3-0:1.0: 2 ports detected [ 2.688020] hub 3-0:1.0: standalone hub [ 2.688021] hub 3-0:1.0: no power switching (usb 1.0) [ 2.688023] hub 3-0:1.0: individual port over-current protection [ 2.688025] hub 3-0:1.0: power on to power good time: 2ms [ 2.688028] hub 3-0:1.0: local power source is good [ 2.688030] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.688044] drivers/usb/core/inode.c: creating file '001' [ 2.688073] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.689297] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.689300] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.690504] drivers/usb/core/inode.c: creating file '004' [ 2.690553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.691764] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.692963] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.692965] uhci_hcd 0000:00:1a.1: Performing full reset [ 2.692989] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 2.694217] usb usb4: default language 0x0409 [ 2.694222] usb usb4: udev 1, busnum 4, minor = 384 [ 2.694224] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.695424] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.696624] usb usb4: Product: UHCI Host Controller [ 2.697793] usb usb4: Manufacturer: Linux 2.6.33-gentoo uhci_hcd [ 2.698977] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.700177] usb usb4: uevent [ 2.700205] usb usb4: usb_probe_device [ 2.700207] usb usb4: configuration #1 chosen from 1 choice [ 2.700212] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.700224] usb 4-0:1.0: uevent [ 2.700253] hub 4-0:1.0: usb_probe_interface [ 2.700254] hub 4-0:1.0: usb_probe_interface - got id [ 2.700256] hub 4-0:1.0: USB hub found [ 2.701420] hub 4-0:1.0: 2 ports detected [ 2.702579] hub 4-0:1.0: standalone hub [ 2.702581] hub 4-0:1.0: no power switching (usb 1.0) [ 2.702582] hub 4-0:1.0: individual port over-current protection [ 2.702584] hub 4-0:1.0: power on to power good time: 2ms [ 2.702588] hub 4-0:1.0: local power source is good [ 2.702589] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.702602] drivers/usb/core/inode.c: creating file '001' [ 2.702775] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2.703951] alloc irq_desc for 22 on node -1 [ 2.703952] alloc kstat_irqs on node -1 [ 2.703956] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.705167] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.705170] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.706385] drivers/usb/core/inode.c: creating file '005' [ 2.706432] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.707624] uhci_hcd 0000:00:1a.2: detected 2 ports [ 2.708805] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.708807] uhci_hcd 0000:00:1a.2: Performing full reset [ 2.708820] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 2.708833] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001860 [ 2.710041] usb usb5: default language 0x0409 [ 2.710047] usb usb5: udev 1, busnum 5, minor = 512 [ 2.710049] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.711225] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.712402] usb usb5: Product: UHCI Host Controller [ 2.713570] usb usb5: Manufacturer: Linux 2.6.33-gentoo uhci_hcd [ 2.714772] usb usb5: SerialNumber: 0000:00:1a.2 [ 2.715986] usb usb5: uevent [ 2.716022] usb usb5: usb_probe_device [ 2.716024] usb usb5: configuration #1 chosen from 1 choice [ 2.716029] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 2.716042] usb 5-0:1.0: uevent [ 2.716070] hub 5-0:1.0: usb_probe_interface [ 2.716071] hub 5-0:1.0: usb_probe_interface - got id [ 2.716073] hub 5-0:1.0: USB hub found [ 2.717250] hub 5-0:1.0: 2 ports detected [ 2.718428] hub 5-0:1.0: standalone hub [ 2.718430] hub 5-0:1.0: no power switching (usb 1.0) [ 2.718431] hub 5-0:1.0: individual port over-current protection [ 2.718433] hub 5-0:1.0: power on to power good time: 2ms [ 2.718436] hub 5-0:1.0: local power source is good [ 2.718438] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 2.718451] drivers/usb/core/inode.c: creating file '001' [ 2.718624] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2.719804] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.720985] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.720988] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.722173] drivers/usb/core/inode.c: creating file '006' [ 2.722223] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.723428] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.724611] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.724613] uhci_hcd 0000:00:1d.0: Performing full reset [ 2.724627] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 2.724632] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001880 [ 2.725838] usb usb6: default language 0x0409 [ 2.725843] usb usb6: udev 1, busnum 6, minor = 640 [ 2.725845] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.727048] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.728225] usb usb6: Product: UHCI Host Controller [ 2.729419] usb usb6: Manufacturer: Linux 2.6.33-gentoo uhci_hcd [ 2.730613] usb usb6: SerialNumber: 0000:00:1d.0 [ 2.731842] usb usb6: uevent [ 2.731870] usb usb6: usb_probe_device [ 2.731872] usb usb6: configuration #1 chosen from 1 choice [ 2.731877] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 2.731890] usb 6-0:1.0: uevent [ 2.731918] hub 6-0:1.0: usb_probe_interface [ 2.731920] hub 6-0:1.0: usb_probe_interface - got id [ 2.731922] hub 6-0:1.0: USB hub found [ 2.733103] hub 6-0:1.0: 2 ports detected [ 2.734277] hub 6-0:1.0: standalone hub [ 2.734279] hub 6-0:1.0: no power switching (usb 1.0) [ 2.734280] hub 6-0:1.0: individual port over-current protection [ 2.734282] hub 6-0:1.0: power on to power good time: 2ms [ 2.734285] hub 6-0:1.0: local power source is good [ 2.734287] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 2.734300] drivers/usb/core/inode.c: creating file '001' [ 2.734327] alloc irq_desc for 17 on node -1 [ 2.734329] alloc kstat_irqs on node -1 [ 2.734332] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.735529] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.735532] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.736743] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 2.736746] hub 1-0:1.0: port 3: status 0501 change 0001 [ 2.736756] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 2.736759] hub 1-0:1.0: port 5: status 0501 change 0001 [ 2.736767] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT [ 2.736769] hub 1-0:1.0: port 6: status 0501 change 0001 [ 2.736781] drivers/usb/core/inode.c: creating file '007' [ 2.736826] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.738020] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.739199] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.739201] uhci_hcd 0000:00:1d.1: Performing full reset [ 2.739226] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 2.740452] usb usb7: default language 0x0409 [ 2.740457] usb usb7: udev 1, busnum 7, minor = 768 [ 2.740459] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.741651] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.742837] usb usb7: Product: UHCI Host Controller [ 2.744015] usb usb7: Manufacturer: Linux 2.6.33-gentoo uhci_hcd [ 2.745218] usb usb7: SerialNumber: 0000:00:1d.1 [ 2.746463] usb usb7: uevent [ 2.746494] usb usb7: usb_probe_device [ 2.746496] usb usb7: configuration #1 chosen from 1 choice [ 2.746501] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 2.746514] usb 7-0:1.0: uevent [ 2.746542] hub 7-0:1.0: usb_probe_interface [ 2.746544] hub 7-0:1.0: usb_probe_interface - got id [ 2.746546] hub 7-0:1.0: USB hub found [ 2.747727] hub 7-0:1.0: 2 ports detected [ 2.748904] hub 7-0:1.0: standalone hub [ 2.748905] hub 7-0:1.0: no power switching (usb 1.0) [ 2.748906] hub 7-0:1.0: individual port over-current protection [ 2.748908] hub 7-0:1.0: power on to power good time: 2ms [ 2.748912] hub 7-0:1.0: local power source is good [ 2.748913] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 2.748926] drivers/usb/core/inode.c: creating file '001' [ 2.748953] alloc irq_desc for 18 on node -1 [ 2.748954] alloc kstat_irqs on node -1 [ 2.748958] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.750155] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.750158] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.751352] drivers/usb/core/inode.c: creating file '008' [ 2.751399] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.752593] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.753782] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.753784] uhci_hcd 0000:00:1d.2: Performing full reset [ 2.753808] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 2.755032] usb usb8: default language 0x0409 [ 2.755037] usb usb8: udev 1, busnum 8, minor = 896 [ 2.755039] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.756232] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.757442] usb usb8: Product: UHCI Host Controller [ 2.758645] usb usb8: Manufacturer: Linux 2.6.33-gentoo uhci_hcd [ 2.759833] usb usb8: SerialNumber: 0000:00:1d.2 [ 2.761066] usb usb8: uevent [ 2.761094] usb usb8: usb_probe_device [ 2.761097] usb usb8: configuration #1 chosen from 1 choice [ 2.761102] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 2.761117] usb 8-0:1.0: uevent [ 2.761144] hub 8-0:1.0: usb_probe_interface [ 2.761146] hub 8-0:1.0: usb_probe_interface - got id [ 2.761148] hub 8-0:1.0: USB hub found [ 2.762334] hub 8-0:1.0: 2 ports detected [ 2.763508] hub 8-0:1.0: standalone hub [ 2.763509] hub 8-0:1.0: no power switching (usb 1.0) [ 2.763511] hub 8-0:1.0: individual port over-current protection [ 2.763512] hub 8-0:1.0: power on to power good time: 2ms [ 2.763516] hub 8-0:1.0: local power source is good [ 2.763517] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 2.763530] drivers/usb/core/inode.c: creating file '001' [ 2.763587] Initializing USB Mass Storage driver... [ 2.764823] usbcore: registered new interface driver usb-storage [ 2.766020] USB Mass Storage support registered. [ 2.767261] usbcore: registered new interface driver libusual [ 2.768531] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.769761] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 2.769764] hub 2-0:1.0: port 4: status 0501 change 0001 [ 2.779185] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.780407] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.781696] mice: PS/2 mouse device common for all mice [ 2.783272] rtc_cmos 00:07: RTC can wake from S4 [ 2.784539] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.785782] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.787038] i2c /dev entries driver [ 2.788315] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.788549] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.789898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.791826] cpuidle: using governor ladder [ 2.793165] sdhci: Secure Digital Host Controller Interface driver [ 2.794447] sdhci: Copyright(c) Pierre Ossman [ 2.795720] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 2.797035] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.799423] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.801800] Registered led device: mmc0:: [ 2.803135] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00 [ 2.804235] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 2.805625] ricoh-mmc: Ricoh MMC Controller disabling driver [ 2.806994] ricoh-mmc: Copyright(c) Philip Langdale [ 2.808377] ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11) [ 2.809728] ricoh-mmc: Controller is now disabled. [ 2.813350] usbcore: registered new interface driver hiddev [ 2.814809] usbcore: registered new interface driver usbhid [ 2.816128] usbhid: USB HID core driver [ 2.817969] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 2.819257] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 2.820609] thinkpad_acpi: ThinkPad BIOS 7VET82WW (3.12 ), EC 7VHT16WW-1.06 [ 2.821963] thinkpad_acpi: Lenovo ThinkPad T400, model 276552G [ 2.823335] uhci_hcd 0000:00:1a.2: port 1 portsc 0082,00 [ 2.823348] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00 [ 2.823625] thinkpad_acpi: radio switch found; radios are enabled [ 2.825024] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 2.826374] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 2.833859] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 2.835340] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.836047] hub 1-0:1.0: state 7 ports 6 chg 0068 evt 0000 [ 2.836053] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 2.840254] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 2.843044] Registered led device: tpacpi::thinklight [ 2.844857] Registered led device: tpacpi::power [ 2.846226] Registered led device: tpacpi::standby [ 2.847588] Registered led device: tpacpi::thinkvantage [ 2.848946] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 [ 2.860991] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 2.862522] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 2.866296] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 2.871387] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.872822] alloc irq_desc for 32 on node -1 [ 2.872824] alloc kstat_irqs on node -1 [ 2.872834] HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X [ 2.872863] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2.887225] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion [ 2.887229] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT [ 2.887232] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 2.927673] ALSA device list: [ 2.929063] #0: HDA Intel at 0xfc220000 irq 32 [ 2.930473] #29: ThinkPad Console Audio Control at EC reg 0x30, fw 7VHT16WW-1.06 [ 2.931898] Netfilter messages via NETLINK v0.30. [ 2.933292] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.934997] ctnetlink v0.93: registering with nfnetlink. [ 2.936851] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.938290] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 2.938296] TCP cubic registered [ 2.938316] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001002 POWER sig=se0 CSC [ 2.938323] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s [ 2.939736] Initializing XFRM netlink socket [ 2.941137] NET: Registered protocol family 17 [ 2.942549] lib80211: common routines for IEEE802.11 drivers [ 2.943902] lib80211_crypt: registered algorithm 'NULL' [ 2.946370] PM: Checking image partition /dev/sda2 [ 2.946385] PM: Resume from partition 8:2 [ 2.946386] PM: Checking hibernation image. [ 2.946583] PM: Error -22 checking image file [ 2.946585] PM: Resume from disk failed. [ 2.946601] registered taskstats version 1 [ 2.948422] Magic number: 2:115:834 [ 2.964041] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 3.068040] hub 1-0:1.0: debounce: port 4: total 125ms stable 100ms status 0x501 [ 3.119228] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion [ 3.119231] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 003801 POWER OWNER sig=j CONNECT [ 3.119234] hub 1-0:1.0: port 4 not reset yet, waiting 50ms [ 3.170040] ehci_hcd 0000:00:1a.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC [ 3.170064] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 3.221228] ehci_hcd 0000:00:1a.7: port 5 high speed [ 3.221231] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 3.272042] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 3.324231] ehci_hcd 0000:00:1a.7: port 5 high speed [ 3.324234] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 3.387381] usb 1-5: udev 4, busnum 1, minor = 3 [ 3.387384] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485 [ 3.388848] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.390333] usb 1-5: uevent [ 3.390382] usb 1-5: usb_probe_device [ 3.390385] usb 1-5: configuration #1 chosen from 1 choice [ 3.390504] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 3.390525] usb 1-5:1.0: uevent [ 3.390599] hub 1-5:1.0: usb_probe_interface [ 3.390602] hub 1-5:1.0: usb_probe_interface - got id [ 3.390605] hub 1-5:1.0: USB hub found [ 3.392120] hub 1-5:1.0: 4 ports detected [ 3.394036] hub 1-5:1.0: standalone hub [ 3.394038] hub 1-5:1.0: individual port power switching [ 3.394039] hub 1-5:1.0: individual port over-current protection [ 3.394131] hub 1-5:1.0: TT per port [ 3.394134] hub 1-5:1.0: TT requires at most 8 FS bit times (666 ns) [ 3.394137] hub 1-5:1.0: power on to power good time: 100ms [ 3.394386] hub 1-5:1.0: local power source is good [ 3.394388] hub 1-5:1.0: enabling power on all ports [ 3.394877] drivers/usb/core/inode.c: creating file '004' [ 3.394908] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 3.445232] ehci_hcd 0000:00:1a.7: port 6 high speed [ 3.445235] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT [ 3.494153] hub 1-5:1.0: port 1: status 0101 change 0001 [ 3.496039] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 3.503842] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000 [ 3.505279] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.548233] ehci_hcd 0000:00:1a.7: port 6 high speed [ 3.548237] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT [ 3.553197] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 3.594042] usb 1-5: link qh256-0001/ffff88013aae3c80 start 1 [1/0 us] [ 3.618647] usb 1-6: skipped 1 descriptor after configuration [ 3.618651] usb 1-6: skipped 5 descriptors after interface [ 3.618654] usb 1-6: skipped 1 descriptor after endpoint [ 3.618657] usb 1-6: skipped 9 descriptors after interface [ 3.619024] usb 1-6: default language 0x0409 [ 3.619460] EXT3-fs (sda3): recovery required on readonly filesystem [ 3.620925] EXT3-fs (sda3): write access will be enabled during recovery [ 3.623389] usb 1-6: udev 5, busnum 1, minor = 4 [ 3.623397] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004 [ 3.624766] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 3.626140] usb 1-6: Product: Integrated Camera [ 3.627519] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. [ 3.628901] usb 1-6: SerialNumber: SN0001 [ 3.630301] usb 1-6: uevent [ 3.630352] usb 1-6: usb_probe_device [ 3.630354] usb 1-6: configuration #1 chosen from 1 choice [ 3.630628] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 3.631895] usb 1-6:1.0: uevent [ 3.631981] usb 1-6: adding 1-6:1.1 (config #1, interface 1) [ 3.632019] usb 1-6:1.1: uevent [ 3.632073] drivers/usb/core/inode.c: creating file '005' [ 3.632087] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.632091] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 3.632097] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000 [ 3.632102] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 3.683333] ehci_hcd 0000:00:1d.7: port 4 high speed [ 3.683337] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 3.704237] usb usb3: suspend_rh (auto-stop) [ 3.707252] kjournald starting. Commit interval 5 seconds [ 3.708640] EXT3-fs (sda3): recovery complete [ 3.711374] EXT3-fs (sda3): mounted filesystem with writeback data mode [ 3.712806] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 3.714206] Freeing unused kernel memory: 692k freed [ 3.715738] Write protecting the kernel read-only data: 10240k [ 3.717261] Freeing unused kernel memory: 412k freed [ 3.718879] Freeing unused kernel memory: 1344k freed [ 3.734047] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 3.798211] ehci_hcd 0000:00:1d.7: port 4 high speed [ 3.798215] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 3.912636] usb 2-4: skipped 3 descriptors after interface [ 3.912638] usb 2-4: skipped 4 descriptors after interface [ 3.912642] usb 2-4: skipped 4 descriptors after interface [ 3.912644] usb 2-4: skipped 2 descriptors after interface [ 3.912646] usb 2-4: skipped 2 descriptors after interface [ 3.912648] usb 2-4: skipped 5 descriptors after interface [ 3.912652] usb 2-4: skipped 4 descriptors after interface [ 3.921370] usb 2-4: skipped 3 descriptors after interface [ 3.921372] usb 2-4: skipped 4 descriptors after interface [ 3.921375] usb 2-4: skipped 4 descriptors after interface [ 3.921378] usb 2-4: skipped 2 descriptors after interface [ 3.921380] usb 2-4: skipped 2 descriptors after interface [ 3.921382] usb 2-4: skipped 5 descriptors after interface [ 3.921493] usb 2-4: default language 0x0409 [ 3.925366] usb 2-4: udev 2, busnum 2, minor = 129 [ 3.925368] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 [ 3.926756] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.928174] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device [ 3.929599] usb 2-4: Manufacturer: Ericsson [ 3.931000] usb 2-4: SerialNumber: 3541430250454020 [ 3.932495] usb 2-4: uevent [ 3.932576] usb 2-4: usb_probe_device [ 3.932579] usb 2-4: configuration #1 chosen from 2 choices [ 3.935355] usb 2-4: adding 2-4:1.0 (config #1, interface 0) [ 3.935610] usb 2-4:1.0: uevent [ 3.935678] usb 2-4: adding 2-4:1.1 (config #1, interface 1) [ 3.953376] usb 2-4:1.1: uevent [ 3.953454] usb 2-4: adding 2-4:1.2 (config #1, interface 2) [ 3.954028] usb usb6: suspend_rh (auto-stop) [ 3.954055] usb usb8: suspend_rh (auto-stop) [ 3.954094] usb usb5: suspend_rh (auto-stop) [ 3.954119] usb usb7: suspend_rh (auto-stop) [ 3.956249] usb 2-4:1.2: uevent [ 3.956349] usb 2-4: adding 2-4:1.3 (config #1, interface 3) [ 3.958756] usb 2-4:1.3: uevent [ 3.958860] usb 2-4: adding 2-4:1.4 (config #1, interface 4) [ 3.961123] usb 2-4:1.4: uevent [ 3.961201] usb 2-4: adding 2-4:1.5 (config #1, interface 5) [ 3.963388] usb 2-4:1.5: uevent [ 3.963442] usb 2-4: adding 2-4:1.6 (config #1, interface 6) [ 3.965614] usb 2-4:1.6: uevent [ 3.965699] usb 2-4: adding 2-4:1.7 (config #1, interface 7) [ 3.967880] usb 2-4:1.7: uevent [ 3.967986] usb 2-4: adding 2-4:1.8 (config #1, interface 8) [ 3.970243] usb 2-4:1.8: uevent [ 3.970328] usb 2-4: adding 2-4:1.9 (config #1, interface 9) [ 3.972520] usb 2-4:1.9: uevent [ 3.972616] usb 2-4: adding 2-4:1.10 (config #1, interface 10) [ 3.974876] usb 2-4:1.10: uevent [ 3.974986] drivers/usb/core/inode.c: creating file '002' [ 3.975012] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 3.975022] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 3.975048] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 4.079312] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 4.181299] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 4.289042] stty used greatest stack depth: 4344 bytes left [ 4.304038] usb 4-1: ep0 maxpacket = 8 [ 4.319710] grep used greatest stack depth: 4256 bytes left [ 4.330271] usb 4-1: default language 0x0409 [ 4.339250] usb 4-1: udev 2, busnum 4, minor = 385 [ 4.339251] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810 [ 4.339253] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.339255] usb 4-1: Product: Fingerprint Sensor [ 4.339324] usb 4-1: uevent [ 4.339378] usb 4-1: usb_probe_device [ 4.339382] usb 4-1: configuration #1 chosen from 1 choice [ 4.342259] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 4.342273] usb 4-1:1.0: uevent [ 4.342333] drivers/usb/core/inode.c: creating file '002' [ 4.342355] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 [ 4.342362] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 4.446098] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 4.548121] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 4.688277] usb 4-2: skipped 1 descriptor after interface [ 4.693272] usb 4-2: default language 0x0409 [ 4.704071] usb 4-2: udev 3, busnum 4, minor = 386 [ 4.704073] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 [ 4.704075] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.704077] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II [ 4.704079] usb 4-2: Manufacturer: Lenovo Computer Corp [ 4.704148] usb 4-2: uevent [ 4.704160] usb 4-2: usb_probe_device [ 4.704162] usb 4-2: configuration #1 chosen from 1 choice [ 4.706275] usb 4-2: adding 4-2:1.0 (config #1, interface 0) [ 4.706297] usb 4-2:1.0: uevent [ 4.706353] usb 4-2: adding 4-2:1.1 (config #1, interface 1) [ 4.706373] usb 4-2:1.1: uevent [ 4.706413] usb 4-2: adding 4-2:1.2 (config #1, interface 2) [ 4.706434] usb 4-2:1.2: uevent [ 4.706472] usb 4-2: adding 4-2:1.3 (config #1, interface 3) [ 4.706497] usb 4-2:1.3: uevent [ 4.706510] drivers/usb/core/inode.c: creating file '003' [ 4.706527] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.706532] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.706535] hub 1-5:1.0: state 7 ports 4 chg 0002 evt 0000 [ 4.706781] hub 1-5:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 4.717139] hub 1-5:1.0: port 1 not reset yet, waiting 10ms [ 4.779169] usb 1-5.1: new full speed USB device using ehci_hcd and address 6 [ 4.790168] hub 1-5:1.0: port 1 not reset yet, waiting 10ms [ 4.835555] udev: starting version 146 [ 4.863565] usb usb3: uevent [ 4.863586] usb 3-0:1.0: uevent [ 4.863646] usb usb4: uevent [ 4.863666] usb 4-0:1.0: uevent [ 4.863689] usb 4-1: uevent [ 4.863711] usb 4-1:1.0: uevent [ 4.863734] usb 4-2: uevent [ 4.863755] usb 4-2:1.0: uevent [ 4.863777] usb 4-2:1.1: uevent [ 4.863799] usb 4-2:1.2: uevent [ 4.863821] usb 4-2:1.3: uevent [ 4.863879] usb usb5: uevent [ 4.863899] usb 5-0:1.0: uevent [ 4.863959] usb usb1: uevent [ 4.863982] usb 1-0:1.0: uevent [ 4.864019] usb 1-5: uevent [ 4.864040] usb 1-5:1.0: uevent [ 4.864064] usb 1-6: uevent [ 4.864086] usb 1-6:1.0: uevent [ 4.864110] usb 1-6:1.1: uevent [ 4.864277] usb 1-5.1: ep0 maxpacket = 8 [ 4.864715] usb usb6: uevent [ 4.864736] usb 6-0:1.0: uevent [ 4.864794] usb usb7: uevent [ 4.864814] usb 7-0:1.0: uevent [ 4.864872] usb usb8: uevent [ 4.864907] usb 8-0:1.0: uevent [ 4.864966] usb usb2: uevent [ 4.864987] usb 2-0:1.0: uevent [ 4.865634] usb 1-5.1: default language 0x0409 [ 4.866136] usb 1-5.1: udev 6, busnum 1, minor = 5 [ 4.866139] usb 1-5.1: New USB device found, idVendor=046d, idProduct=0b02 [ 4.866141] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.866144] usb 1-5.1: Product: Logitech BT Mini-Receiver [ 4.866145] usb 1-5.1: Manufacturer: Logitech [ 4.866209] usb 1-5.1: uevent [ 4.866222] usb 1-5.1: usb_probe_device [ 4.866226] usb 1-5.1: configuration #1 chosen from 1 choice [ 4.866390] usb 1-5.1: adding 1-5.1:1.0 (config #1, interface 0) [ 4.866407] usb 1-5.1:1.0: uevent [ 4.866418] hub 1-5.1:1.0: usb_probe_interface [ 4.866420] hub 1-5.1:1.0: usb_probe_interface - got id [ 4.866422] hub 1-5.1:1.0: USB hub found [ 4.866512] hub 1-5.1:1.0: 3 ports detected [ 4.866515] hub 1-5.1:1.0: compound device; port removable status: RFF [ 4.866516] hub 1-5.1:1.0: ganged power switching [ 4.866518] hub 1-5.1:1.0: global over-current protection [ 4.866520] hub 1-5.1:1.0: power on to power good time: 100ms [ 4.866636] hub 1-5.1:1.0: hub controller current requirement: 100mA [ 4.866638] hub 1-5.1:1.0: 100mA bus power budget for each child [ 4.866761] hub 1-5.1:1.0: no over-current condition exists [ 4.866763] hub 1-5.1:1.0: enabling power on all ports [ 4.867147] drivers/usb/core/inode.c: creating file '006' [ 4.867165] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 4.872451] usb 2-4: uevent [ 4.872479] usb 2-4:1.0: uevent [ 4.872503] usb 2-4:1.1: uevent [ 4.872526] usb 2-4:1.10: uevent [ 4.872549] usb 2-4:1.2: uevent [ 4.872572] usb 2-4:1.3: uevent [ 4.872595] usb 2-4:1.4: uevent [ 4.872617] usb 2-4:1.5: uevent [ 4.872640] usb 2-4:1.6: uevent [ 4.872662] usb 2-4:1.7: uevent [ 4.872684] usb 2-4:1.8: uevent [ 4.872706] usb 2-4:1.9: uevent [ 4.893176] usb usb2: uevent [ 4.894704] usb usb4: uevent [ 4.895462] usb usb3: uevent [ 4.897392] usb usb5: uevent [ 4.898226] usb usb1: uevent [ 4.900050] usb usb6: uevent [ 4.921445] usb 4-1: uevent [ 4.922416] usb 1-5: uevent [ 4.924339] usb usb8: uevent [ 4.931258] usb 4-2: uevent [ 4.932140] usb 1-6: uevent [ 4.933756] usb usb7: uevent [ 4.934670] usb 2-4: uevent [ 4.957616] usb 1-5.1: uevent [ 4.967513] hub 1-5.1:1.0: port 2: status 0101 change 0001 [ 4.967763] hub 1-5.1:1.0: port 3: status 0101 change 0001 [ 4.980023] cdc_wdm 2-4:1.5: usb_probe_interface [ 4.980026] cdc_wdm 2-4:1.5: usb_probe_interface - got id [ 4.980036] drivers/usb/core/file.c: looking for a minor, starting at 176 [ 4.980083] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device [ 4.980088] cdc_wdm 2-4:1.6: usb_probe_interface [ 4.980090] cdc_wdm 2-4:1.6: usb_probe_interface - got id [ 4.980094] drivers/usb/core/file.c: looking for a minor, starting at 176 [ 4.980117] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device [ 4.980136] usbcore: registered new interface driver cdc_wdm [ 5.065192] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33-gentoo-kds [ 5.065195] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 5.065274] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.065283] iwlagn 0000:03:00.0: setting latency timer to 64 [ 5.067389] usb 1-5.1: link qh128-0601/ffff880138214400 start 2 [1/2 us] [ 5.067619] hub 1-5.1:1.0: state 7 ports 3 chg 000c evt 0000 [ 5.067766] hub 1-5.1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 5.074542] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24 [ 5.096412] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 5.096500] alloc irq_desc for 33 on node -1 [ 5.096502] alloc kstat_irqs on node -1 [ 5.096540] iwlagn 0000:03:00.0: irq 33 for MSI/MSI-X [ 5.098474] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 5.130532] usb 1-5.1.2: new full speed USB device using ehci_hcd and address 7 [ 5.205287] usb 1-5.1.2: ep0 maxpacket = 8 [ 5.209048] usb 1-5.1.2: skipped 1 descriptor after interface [ 5.209540] usb 1-5.1.2: default language 0x0409 [ 5.212289] usb 1-5.1.2: udev 7, busnum 1, minor = 6 [ 5.212292] usb 1-5.1.2: New USB device found, idVendor=046d, idProduct=c70b [ 5.212295] usb 1-5.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.212298] usb 1-5.1.2: Product: Logitech BT Mini-Receiver [ 5.212301] usb 1-5.1.2: Manufacturer: Logitech [ 5.212303] usb 1-5.1.2: SerialNumber: 000761E28047 [ 5.212389] usb 1-5.1.2: uevent [ 5.212414] usb 1-5.1.2: usb_probe_device [ 5.212419] usb 1-5.1.2: configuration #1 chosen from 1 choice [ 5.213175] usb 1-5.1.2: uevent [ 5.213280] usb 1-5.1.2: adding 1-5.1.2:1.0 (config #1, interface 0) [ 5.213300] usb 1-5.1.2:1.0: uevent [ 5.213319] usbhid 1-5.1.2:1.0: usb_probe_interface [ 5.213321] usbhid 1-5.1.2:1.0: usb_probe_interface - got id [ 5.216298] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.2/1-5.1.2:1.0/input/input7 [ 5.216314] usb 1-5.1.2: link qh8-0601/ffff880137919f80 start 3 [1/2 us] [ 5.216367] generic-usb 0003:046D:C70B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.7-5.1.2/input0 [ 5.216401] drivers/usb/core/inode.c: creating file '007' [ 5.216416] hub 1-5.1:1.0: 302mA power budget left [ 5.216528] hub 1-5.1:1.0: port 3, status 0101, change 0000, 12 Mb/s [ 5.218569] usb 1-5.1.2:1.0: uevent [ 5.218682] usb 1-5.1.2: uevent [ 5.219668] usb 1-5.1.2:1.0: uevent [ 5.278163] usb 1-5.1.3: new full speed USB device using ehci_hcd and address 8 [ 5.352069] usb 1-5.1.3: ep0 maxpacket = 8 [ 5.355914] usb 1-5.1.3: skipped 1 descriptor after interface [ 5.356398] usb 1-5.1.3: default language 0x0409 [ 5.359537] usb 1-5.1.3: udev 8, busnum 1, minor = 7 [ 5.359541] usb 1-5.1.3: New USB device found, idVendor=046d, idProduct=c70c [ 5.359544] usb 1-5.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.359547] usb 1-5.1.3: Product: Logitech BT Mini-Receiver [ 5.359550] usb 1-5.1.3: Manufacturer: Logitech [ 5.359552] usb 1-5.1.3: SerialNumber: 000761E28047 [ 5.359626] usb 1-5.1.3: uevent [ 5.359645] usb 1-5.1.3: usb_probe_device [ 5.359649] usb 1-5.1.3: configuration #1 chosen from 1 choice [ 5.360361] usb 1-5.1.3: uevent [ 5.360818] usb 1-5.1.3: adding 1-5.1.3:1.0 (config #1, interface 0) [ 5.360845] usb 1-5.1.3:1.0: uevent [ 5.360872] usbhid 1-5.1.3:1.0: usb_probe_interface [ 5.360875] usbhid 1-5.1.3:1.0: usb_probe_interface - got id [ 5.367477] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1.3/1-5.1.3:1.0/input/input8 [ 5.367494] usb 1-5.1.3: link qh4-0601/ffff880137919780 start 0 [1/2 us] [ 5.367547] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 5.367592] generic-usb 0003:046D:C70C.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.7-5.1.3/input0 [ 5.367613] drivers/usb/core/inode.c: creating file '008' [ 5.367628] hub 1-5.1:1.0: 204mA power budget left [ 5.367631] hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 5.369955] usb 1-5.1.3:1.0: uevent [ 5.369968] usb 1-5.1.3:1.0: uevent [ 5.370099] usb 1-5.1.3: uevent [ 5.370101] usb 1-5.1.3: uevent [ 5.371227] usb 1-5.1.3:1.0: uevent [ 5.371369] usb 1-5.1.3:1.0: uevent [ 5.701288] hub 3-0:1.0: hub_suspend [ 5.701296] usb usb3: bus auto-suspend [ 5.701300] usb usb3: suspend_rh [ 5.704066] hub 6-0:1.0: hub_suspend [ 5.704071] usb usb6: bus auto-suspend [ 5.704072] usb usb6: suspend_rh [ 5.704088] hub 8-0:1.0: hub_suspend [ 5.704090] usb usb8: bus auto-suspend [ 5.704092] usb usb8: suspend_rh [ 5.978102] EXT3-fs (sda3): using internal journal [ 6.114076] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com [ 7.704054] hub 5-0:1.0: hub_suspend [ 7.704064] usb usb5: bus auto-suspend [ 7.704067] usb usb5: suspend_rh [ 7.704085] hub 7-0:1.0: hub_suspend [ 7.704089] usb usb7: bus auto-suspend [ 7.704092] usb usb7: suspend_rh [ 9.276374] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 9.512965] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 22.064392] kjournald starting. Commit interval 5 seconds [ 22.064645] EXT3-fs (dm-0): using internal journal [ 22.064651] EXT3-fs (dm-0): mounted filesystem with writeback data mode [ 22.110255] kjournald starting. Commit interval 5 seconds [ 22.110479] EXT3-fs (dm-1): using internal journal [ 22.110484] EXT3-fs (dm-1): mounted filesystem with writeback data mode [ 22.150223] kjournald starting. Commit interval 5 seconds [ 22.150463] EXT3-fs (dm-2): using internal journal [ 22.150468] EXT3-fs (dm-2): mounted filesystem with writeback data mode [ 22.173529] kjournald starting. Commit interval 5 seconds [ 22.173880] EXT3-fs (dm-3): using internal journal [ 22.173885] EXT3-fs (dm-3): mounted filesystem with writeback data mode [ 22.296213] Adding 6297472k swap on /dev/sda2. Priority:-1 extents:1 across:6297472k [ 23.675583] find used greatest stack depth: 4104 bytes left [ 25.035164] dumpkeys used greatest stack depth: 4000 bytes left [ 27.527567] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X [ 27.578388] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X [ 30.715982] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 72.462889] dhcpcd used greatest stack depth: 3664 bytes left [ 273.214006] CE: hpet increasing min_delta_ns to 15000 nsec --- Xorg.0.log --- X.Org X Server 1.7.5 Release Date: 2010-02-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.33-gentoo x86_64 Current Operating System: Linux madsr 2.6.33-gentoo #1 SMP Thu Feb 25 11:50:49 CET 2010 x86_64 Kernel command line: root=/dev/sda3 Build Date: 26 February 2010 12:35:08PM Current version of pixman: 0.17.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 1 12:30:20 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (==) Not automatically adding devices (==) Not automatically enabling devices (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/, /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ (**) ModulePath set to "/usr/lib64/xorg/modules" (II) Loader magic: 0x7be4e0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:95c4:17aa:210e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "radeon" (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so (II) Module radeon: vendor="X.Org Foundation" compiled for 1.7.5, module version = 6.12.99 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.5.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.5, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) LoadModule: "synaptics" (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI), ATI Radeon Mobility X300 (M24) 3152 (PCIE), ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE), ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP), ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650, ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337, ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI), ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP), ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), ATI Radeon Mobility 9800 (M18) JN (AGP), ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP), ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI FireGL Mobility 9000 (M9) Ld (AGP), ATI Radeon Mobility 9000 (M9) Lf (AGP), ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP), ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), ATI Radeon Mobility 9600 (M10) NQ (AGP), ATI Radeon Mobility 9600 (M11) NR (AGP), ATI Radeon Mobility 9600 (M10) NS (AGP), ATI FireGL Mobility T2 (M10) NT (AGP), ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI), ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), ATI Radeon Mobility X300 (M22) 5460 (PCIE), ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE), ATI Radeon X800PRO (R423) UI (PCIE), ATI Radeon X800LE (R423) UJ (PCIE), ATI Radeon X800SE (R423) UK (PCIE), ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE), ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), ATI FireGL unknown (R423) UR (PCIE), ATI FireGL unknown (R423) UT (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility Radeon X700 XL (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834, ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon XPRESS 200 5954 (PCIE), ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP), ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE), ATI Radeon XPRESS 200M 5975 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE), ATI Radeon XPRESS 200M 5A42 (PCIE), ATI Radeon XPRESS 200 5A61 (PCIE), ATI Radeon XPRESS 200M 5A62 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE), ATI Radeon X600 (RV370) 5B62 (PCIE), ATI Radeon X550 (RV370) 5B63 (PCIE), ATI FireGL V3100 (RV370) 5B64 (PCIE), ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Mobility Radeon X800 XT (M28) (PCIE), ATI Mobility FireGL V5100 (M28) (PCIE), ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE), ATI Radeon X850 XT PE (R480) (PCIE), ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), ATI Radeon X850 XT (R480) (PCIE), ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 PRO (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1300/X1550, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300, ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350, ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550, ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450, ATI Radeon X1300/X1550, ATI Mobility Radeon X2300, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI Mobility Radeon X1350, ATI Mobility Radeon X1450, ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Mobility Radeon X1700, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950, ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560, ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400, ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560, ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon 4800 Series, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770, ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI RV670, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon RV710, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI RS880, CYPRESS, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, ATI Mobility Radeon HD 5800 Series, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5000 Series, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR, ATI FirePro (FireGL) Graphics Adapter, ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450, CEDAR (II) Primary Device is: PCI 01@00:00:0 (II) [KMS] Kernel modesetting enabled. (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) RADEON(0): Default visual is TrueColor (==) RADEON(0): RGB weight 888 (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (ChipID = 0x95c4) (II) RADEON(0): PCIE card detected (WW) RADEON(0): Color tiling is not yet supported on R600/R700 (II) RADEON(0): KMS Color Tiling: disabled drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) RADEON(0): Output DVI-0 using monitor section Monitor0 (II) RADEON(0): Output LVDS has no monitor section (II) RADEON(0): Output VGA-0 has no monitor section (II) RADEON(0): EDID vendor "PHL", prod id 49205 (II) RADEON(0): Using EDID range info for horizontal sync (II) RADEON(0): Using EDID range info for vertical refresh (II) RADEON(0): Printing DDC gathered Modelines: (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) RADEON(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz) (II) RADEON(0): Output DVI-0 connected (II) RADEON(0): Output LVDS connected (II) RADEON(0): Output VGA-0 disconnected (II) RADEON(0): Using fuzzy aspect match for initial modes (II) RADEON(0): Output DVI-0 using initial mode 1024x768 (II) RADEON(0): Output LVDS using initial mode 1024x768 (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:f7d7000 (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM (**) RADEON(0): Display dimensions: (520, 290) mm (**) RADEON(0): DPI set to (50, 67) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib64/xorg/modules/libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.7.5, module version = 2.5.0 ABI class: X.Org Video Driver, version 6.0 (--) Depth 24 pixmap format is 32 bpp (II) RADEON(0): [DRI2] Setup complete (II) RADEON(0): Front buffer size: 3072K (II) RADEON(0): VRAM usage limit set to 225644K (==) RADEON(0): Backing store disabled (II) RADEON(0): Direct rendering enabled (II) RADEON(0): Setting EXA maxPitchBytes (II) EXA(0): Driver allocated offscreen pixmaps (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (II) UploadToScreen (II) DownloadFromScreen (II) RADEON(0): Acceleration enabled (**) RADEON(0): DPMS enabled (==) RADEON(0): Silken mouse enabled (II) RADEON(0): Set up textured video (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib64/dri/r600_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) RADEON(0): Setting screen physical size to 270 x 203 (**) Option "Protocol" "auto" (**) Option "Device" "/dev/input/mice" (II) Mouse0: Setting mouse protocol to "ExplorerPS/2" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/input/mice" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5 6 7" (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7 (**) Mouse0: Buttons: 11 (**) Mouse0: Sensitivity: 1 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Mouse0: (accel) keeping acceleration scheme 1 (**) Mouse0: (accel) acceleration profile 0 (II) Mouse0: Setting mouse protocol to "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Keyboard0: Device: "/dev/input/by-path/platform-i8042-serio-0-event-kbd" (II) Keyboard0: Found keys (II) Keyboard0: Configuring as keyboard (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "dk" (II) Synaptics touchpad driver version 1.2.1 (--) Mouse1 auto-dev sets device to /dev/input/event6 (**) Option "Device" "/dev/input/event6" (II) Mouse1: x-axis range 1472 - 5472 (II) Mouse1: y-axis range 1408 - 4448 (II) Mouse1: pressure range 0 - 255 (II) Mouse1: finger width range 0 - 0 (II) Mouse1: buttons: left right (--) Mouse1: touchpad found (**) Mouse1: always reports core events (II) XINPUT: Adding extended input device "Mouse1" (type: TOUCHPAD) (**) Mouse1: (accel) keeping acceleration scheme 1 (**) Mouse1: (accel) acceleration profile 0 (--) Mouse1: touchpad found (**) Keyboard1: always reports core events (**) Keyboard1: Device: "/dev/input/by-id/usb-Logitech_Logitech_BT_Mini-Receiver_000761E28047-event-kbd" (II) Keyboard1: Found keys (II) Keyboard1: Configuring as keyboard (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "dk" (II) RADEON(0): EDID vendor "LEN", prod id 16438 (II) RADEON(0): Printing DDC gathered Modelines: (II) RADEON(0): Modeline "1440x900"x0.0 101.56 1440 1488 1520 1828 900 903 909 926 -hsync -vsync (55.6 kHz) (II) RADEON(0): Modeline "1440x900"x0.0 86.61 1440 1488 1520 1688 900 903 909 1026 -hsync -vsync (51.3 kHz) (II) RADEON(0): Allocate new frame buffer 1440x912 stride 1472 (II) RADEON(0): VRAM usage limit set to 223689K (II) RADEON(0): EDID vendor "LEN", prod id 16438 (II) RADEON(0): Printing DDC gathered Modelines: (II) RADEON(0): Modeline "1440x900"x0.0 101.56 1440 1488 1520 1828 900 903 909 926 -hsync -vsync (55.6 kHz) (II) RADEON(0): Modeline "1440x900"x0.0 86.61 1440 1488 1520 1688 900 903 909 1026 -hsync -vsync (51.3 kHz) (II) RADEON(0): Allocate new frame buffer 3360x1088 stride 3392 (II) RADEON(0): VRAM usage limit set to 215434K (II) 3rd Button detected: disabling emulate3Button