Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.9-67.fc12.x86_64 (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #1 SMP Sat Feb 27 09:26:40 UTC 2010 Command line: ro root=UUID=45c0fbf5-8789-48db-8fb7-99cd3f7a449f LANG=ru_RU.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us-acentos rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf682000 (usable) BIOS-e820: 00000000bf682000 - 00000000bf6bf000 (reserved) BIOS-e820: 00000000bf6bf000 - 00000000bf75d000 (usable) BIOS-e820: 00000000bf75d000 - 00000000bf7bf000 (ACPI NVS) BIOS-e820: 00000000bf7bf000 - 00000000bf7e4000 (usable) BIOS-e820: 00000000bf7e4000 - 00000000bf7ff000 (ACPI data) BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable) BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved) BIOS-e820: 00000000ec000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.6 present. last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE00000 mask FFFE00000 write-protect 2 base 080000000 mask FC0000000 write-back 3 base 0BF800000 mask FFF800000 uncachable 4 base 100000000 mask FC0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 4094MB, range: 2MB, type WP reg 2, base: 2GB, range: 1GB, type WB reg 3, base: 3064MB, range: 8MB, type UC reg 4, base: 4GB, range: 1GB, type WB total RAM covered: 4088M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3064MB, range: 8MB, type UC reg 3, base: 4GB, range: 1GB, type WB e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbf800 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bf800000 0000000000 - 00bf800000 page 2M kernel direct mapping tables up to bf800000 @ 8000-c000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ a000-10000 RAMDISK: 373b7000 - 37feffea ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) ACPI: XSDT 00000000bf7fe120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 00000000bf7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: DSDT 00000000bf7ed000 0BCED (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: FACS 00000000bf76f000 00040 ACPI: ASF! 00000000bf7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: APIC 00000000bf7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SLIC 00000000bf7ec000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240) ACPI: BOOT 00000000bf7e9000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: ASPT 00000000bf7e5000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 00000000bf7e4000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [000000000000b000 - 0000000000020fff] bootmap [0000000000021000 - 0000000000048fff] pages 28 (8 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001a53ee8] TEXT DATA BSS ==> [0001000000 - 0001a53ee8] #3 [00373b7000 - 0037feffea] RAMDISK ==> [00373b7000 - 0037feffea] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] #5 [0001a54000 - 0001a54260] BRK ==> [0001a54000 - 0001a54260] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001c00000-ffff8800053fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x000bf682 0: 0x000bf6bf -> 0x000bf75d 0: 0x000bf7bf -> 0x000bf7e4 0: 0x000bf7ff -> 0x000bf800 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1046244 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3838 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765822 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bf682000 - 00000000bf6bf000 PM: Registered nosave memory: 00000000bf75d000 - 00000000bf7bf000 PM: Registered nosave memory: 00000000bf7e4000 - 00000000bf7ff000 PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000ec000000 PM: Registered nosave memory: 00000000ec000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000 PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:2c000000) Booting paravirtualized kernel on bare hardware NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880005600000 s90392 r8192 d24296 u262144 pcpu-alloc: s90392 r8192 d24296 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028220 Policy zone: Normal Kernel command line: ro root=UUID=45c0fbf5-8789-48db-8fb7-99cd3f7a449f LANG=ru_RU.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us-acentos rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800057de000 - ffff8800097de000 software IO TLB at phys 0x57de000 - 0x97de000 Memory: 4037132k/5242880k available (4463k kernel code, 1057904k absent, 147844k reserved, 3722k data, 936k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 1595.923 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.84 BogoMIPS (lpj=1595923) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 0/0x0 -> Node 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 using mwait in idle threads. Performance Events: Nehalem/Corei7 events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 23773 entries in 94 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 1/0x1 -> Node 0 CPU1: Thermal monitoring enabled (TM1) CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 CPU1: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 2/0x2 -> Node 0 CPU2: Thermal monitoring enabled (TM1) CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 CPU2: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 3/0x3 -> Node 0 CPU3: Thermal monitoring enabled (TM1) CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 CPU3: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Booting processor 4 APIC 0x4 ip 0x6000 Initializing CPU#4 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 4/0x4 -> Node 0 CPU4: Thermal monitoring enabled (TM1) CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 CPU4: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#4]: passed. Booting processor 5 APIC 0x5 ip 0x6000 Initializing CPU#5 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 5/0x5 -> Node 0 CPU5: Thermal monitoring enabled (TM1) CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 CPU5: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#5]: passed. Booting processor 6 APIC 0x6 ip 0x6000 Initializing CPU#6 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 6/0x6 -> Node 0 CPU6: Thermal monitoring enabled (TM1) CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 CPU6: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#6]: passed. Booting processor 7 APIC 0x7 ip 0x6000 Initializing CPU#7 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 6144K CPU 7/0x7 -> Node 0 CPU7: Thermal monitoring enabled (TM1) CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 CPU7: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs Total of 8 processors activated (25532.02 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=784 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5984 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 (cpu_power = 589) 1 (cpu_power = 589) domain 1: span 0-7 level MC groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 (cpu_power = 589) 0 (cpu_power = 589) domain 1: span 0-7 level MC groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) CPU2 attaching sched-domain: domain 0: span 2-3 level SIBLING groups: 2 (cpu_power = 589) 3 (cpu_power = 589) domain 1: span 0-7 level MC groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) CPU3 attaching sched-domain: domain 0: span 2-3 level SIBLING groups: 3 (cpu_power = 589) 2 (cpu_power = 589) domain 1: span 0-7 level MC groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) CPU4 attaching sched-domain: domain 0: span 4-5 level SIBLING groups: 4 (cpu_power = 589) 5 (cpu_power = 589) domain 1: span 0-7 level MC groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) CPU5 attaching sched-domain: domain 0: span 4-5 level SIBLING groups: 5 (cpu_power = 589) 4 (cpu_power = 589) domain 1: span 0-7 level MC groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) CPU6 attaching sched-domain: domain 0: span 6-7 level SIBLING groups: 6 (cpu_power = 589) 7 (cpu_power = 589) domain 1: span 0-7 level MC groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) CPU7 attaching sched-domain: domain 0: span 6-7 level SIBLING groups: 7 (cpu_power = 589) 6 (cpu_power = 589) domain 1: span 0-7 level MC groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) devtmpfs: initialized regulator: core version 0.5 Time: 17:37:02 Date: 03/09/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base ec000000 segment 0 buses 0 - 63 PCI: MCFG area at ec000000 reserved in E820 PCI: Using MMCONFIG at ec000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 2 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\CPUT] (Node ffff88013ba7cc60), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\PSSC] (Node ffff88013ba7cc80), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node ffff88013ba6c5c0), AE_NOT_FOUND Fail in evaluating the _REG object of EC device. Broken bios is suspected. ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. _OSC invalid UUID ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:1a.0: reg 10 32bit mmio: [0xdd105c00-0xdd105fff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xdd100000-0xdd103fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold pci 0000:00:1c.7: PME# disabled pci 0000:00:1d.0: reg 10 32bit mmio: [0xdd105800-0xdd105bff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x8048-0x804f] pci 0000:00:1f.2: reg 14 io port: [0x8054-0x8057] pci 0000:00:1f.2: reg 18 io port: [0x8040-0x8047] pci 0000:00:1f.2: reg 1c io port: [0x8050-0x8053] pci 0000:00:1f.2: reg 20 io port: [0x8020-0x803f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdd105000-0xdd1057ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xdd106000-0xdd1060ff] pci 0000:00:1f.3: reg 20 io port: [0x8000-0x801f] pci 0000:00:1f.6: reg 10 64bit mmio: [0xdd104000-0xdd104fff] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xd0000000-0xd1ffffff] pci 0000:01:00.0: reg 24 io port: [0x7000-0x707f] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff] pci 0000:01:00.1: reg 10 32bit mmio: [0xd3000000-0xd3003fff] pci 0000:00:03.0: bridge io port: [0x7000-0x7fff] pci 0000:00:03.0: bridge 32bit mmio: [0xd2000000-0xd30fffff] pci 0000:00:03.0: bridge 64bit mmio pref: [0xc0000000-0xd1ffffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xdc100000-0xdc101fff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0x6000-0x6fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xdc100000-0xdd0fffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3100000-0xd40fffff] pci 0000:03:00.0: reg 10 io port: [0x5000-0x50ff] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xd4104000-0xd4104fff] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xd4100000-0xd4103fff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xdb100000-0xdc0fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4100000-0xd50fffff] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xda100000-0xdb0fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd5100000-0xd60fffff] pci 0000:05:00.0: reg 10 32bit mmio: [0xd9100000-0xd91007ff] pci 0000:05:00.0: reg 14 32bit mmio: [0xd9100d00-0xd9100d7f] pci 0000:05:00.0: reg 20 32bit mmio: [0xd9100c80-0xd9100cff] pci 0000:05:00.0: reg 24 32bit mmio: [0xd9100c00-0xd9100c7f] pci 0000:05:00.1: reg 10 32bit mmio: [0xd9100b00-0xd9100bff] pci 0000:05:00.2: reg 10 32bit mmio: [0xd9100a00-0xd9100aff] pci 0000:05:00.3: reg 10 32bit mmio: [0xd9100900-0xd91009ff] pci 0000:05:00.4: reg 10 32bit mmio: [0xd9100800-0xd91008ff] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xd9100000-0xda0fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd6100000-0xd70fffff] pci 0000:00:1c.7: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.7: bridge 32bit mmio: [0xd8100000-0xd90fffff] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xd7100000-0xd80fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI Warning for \_SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20090903/nspredef-433) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] _OSC invalid UUID ACPI: PCI Root Bridge [CPBG] (0000:3f) ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI hpet: hpet4 irq 26 for MSI hpet: hpet5 irq 27 for MSI hpet: hpet6 irq 28 for MSI Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0xffff-0xffff has been reserved system 00:06: ioport range 0xffff-0xffff has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x500-0x57f has been reserved system 00:06: ioport range 0x164e-0x164f has been reserved system 00:06: ioport range 0x380-0x38e has been reserved system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0b: iomem range 0xfed1b000-0xfed1bfff has been reserved system 00:0b: iomem range 0xfff00000-0x101efffff could not be reserved system 00:0b: iomem range 0xdd200000-0xdd200fff has been reserved system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0b: iomem range 0xff000000-0xffffffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved pci 0000:01:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: 0x7000-0x7fff pci 0000:00:03.0: MEM window: 0xd2000000-0xd30fffff pci 0000:00:03.0: PREFETCH window: 0x000000c0000000-0x000000d1ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x6000-0x6fff pci 0000:00:1c.0: MEM window: 0xdc100000-0xdd0fffff pci 0000:00:1c.0: PREFETCH window: 0x000000d3100000-0x000000d40fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x5000-0x5fff pci 0000:00:1c.1: MEM window: 0xdb100000-0xdc0fffff pci 0000:00:1c.1: PREFETCH window: 0x000000d4100000-0x000000d50fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.3: IO window: 0x4000-0x4fff pci 0000:00:1c.3: MEM window: 0xda100000-0xdb0fffff pci 0000:00:1c.3: PREFETCH window: 0x000000d5100000-0x000000d60fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.4: IO window: 0x3000-0x3fff pci 0000:00:1c.4: MEM window: 0xd9100000-0xda0fffff pci 0000:00:1c.4: PREFETCH window: 0x000000d6100000-0x000000d70fffff pci 0000:00:1c.7: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.7: IO window: 0x2000-0x2fff pci 0000:00:1c.7: MEM window: 0xd8100000-0xd90fffff pci 0000:00:1c.7: PREFETCH window: 0x000000d7100000-0x000000d80fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.7: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff] pci_bus 0000:01: resource 1 mem: [0xd2000000-0xd30fffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xd1ffffff] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff] pci_bus 0000:02: resource 1 mem: [0xdc100000-0xdd0fffff] pci_bus 0000:02: resource 2 pref mem [0xd3100000-0xd40fffff] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff] pci_bus 0000:03: resource 1 mem: [0xdb100000-0xdc0fffff] pci_bus 0000:03: resource 2 pref mem [0xd4100000-0xd50fffff] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xda100000-0xdb0fffff] pci_bus 0000:04: resource 2 pref mem [0xd5100000-0xd60fffff] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff] pci_bus 0000:05: resource 1 mem: [0xd9100000-0xda0fffff] pci_bus 0000:05: resource 2 pref mem [0xd6100000-0xd70fffff] pci_bus 0000:06: resource 0 io: [0x2000-0x2fff] pci_bus 0000:06: resource 1 mem: [0xd8100000-0xd90fffff] pci_bus 0000:06: resource 2 pref mem [0xd7100000-0xd80fffff] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:3f: resource 0 io: [0x00-0xffff] pci_bus 0000:3f: resource 1 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 12515k freed Simple Boot Flag at 0x44 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1268156221.106:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7909 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:03.0: irq 29 for MSI/MSI-X pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: irq 32 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.4: irq 33 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 34 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.7: irq 34 for MSI/MSI-X pcieport 0000:00:1c.7: setting latency timer to 64 _OSC invalid UUID aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed pci_hotplug: PCI Hot Plug PCI Core version: 0.5 _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID _OSC invalid UUID pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [ACAD] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: SSDT 00000000bf691a98 002DA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 00000000bf690618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 00000000bf691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 00000000bf68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 processor LNXCPU:04: registered as cooling_device4 processor LNXCPU:05: registered as cooling_device5 processor LNXCPU:06: registered as cooling_device6 processor LNXCPU:07: registered as cooling_device7 ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 35 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 35 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xdd105000 port 0xdd105100 irq 35 ata2: SATA max UDMA/133 abar m2048@0xdd105000 port 0xdd105180 irq 35 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xdd105000 port 0xdd105300 irq 35 ata6: SATA max UDMA/133 abar m2048@0xdd105000 port 0xdd105380 irq 35 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdd105c00 ACPI: Battery Slot [BAT0] (battery present) ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.9-67.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 21, io mem 0xdd105800 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.9-67.fc12.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:42:643 ------------[ cut here ]------------ WARNING: at arch/x86/kernel/hpet.c:392 hpet_next_event+0x5c/0x81() Hardware name: HP Pavilion dv8 Notebook PC Modules linked in: rtc_cmos 00:07: setting system clock to 2010-03-09 17:37:03 UTC (1268156223) Pid: 0, comm: swapper Not tainted 2.6.32.9-67.fc12.x86_64 #1 Call Trace: [] warn_slowpath_common+0x7c/0x94 [] warn_slowpath_null+0x14/0x16 [] hpet_next_event+0x5c/0x81 [] hpet_legacy_next_event+0x10/0x12 [] clockevents_program_event+0x7a/0x83 [] tick_dev_program_event+0x3c/0xaa [] tick_broadcast_oneshot_control+0xa4/0x100 [] tick_notify+0x222/0x379 [] notifier_call_chain+0x37/0x63 [] raw_notifier_call_chain+0x14/0x16 [] clockevents_notify+0x3d/0x100 [] lapic_timer_state_broadcast+0x46/0x48 [] acpi_idle_enter_simple+0x96/0x13d [] ? notifier_call_chain+0x14/0x63 [] ? menu_select+0x143/0x1fc [] cpuidle_idle_call+0x99/0xf3 [] cpu_idle+0xaa/0xe4 [] start_secondary+0x1f2/0x233 Initalizing network drop monitor service ---[ end trace 035c891f2528e1e3 ]--- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) usb 1-1: new high speed USB device using ehci_hcd and address 2 ata1.00: ATA-8: ST9500420AS, 0003HPM1, max UDMA/100 ata5.00: ATA-8: ST9500420AS, 0003HPM1, max UDMA/100 ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata5.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata2.00: ATAPI: hp BDDVDRW CT10L, YC09, max UDMA/100, ATAPI AN ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM hp BDDVDRW CT10L YC09 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 4:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sda2 < sda5 sda6 sda7 sdb1 sd 4:0:0:0: [sdb] Attached SCSI disk sda8 sda9 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 936k freed Write protecting the kernel read-only data: 6592k usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected dracut: dracut-004-4.fc12 udev: starting version 145 [drm] Initialized drm 1.1.0 20060810 usb 2-1: new high speed USB device using ehci_hcd and address 2 nouveau 0000:01:00.0: power state changed by ACPI to D0 nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5400a2) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 70.16.25.00 [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:01:00.0: 0: 0x00000340: type 0x40 idx 3 tag 0xff [drm] nouveau 0000:01:00.0: 1: 0x00001061: type 0x61 idx 0 tag 0x07 [drm] nouveau 0000:01:00.0: 2: 0x00000147: type 0x47 idx 1 tag 0xff [drm] nouveau 0000:01:00.0: 3: 0x00002131: type 0x31 idx 1 tag 0x08 [drm] nouveau 0000:01:00.0: 4: 0x00000400: type 0x00 idx 4 tag 0xff [drm] nouveau 0000:01:00.0: 5: 0x00000210: type 0x10 idx 2 tag 0xff [drm] nouveau 0000:01:00.0: 6: 0x00000211: type 0x11 idx 2 tag 0xff [drm] nouveau 0000:01:00.0: 7: 0x00000213: type 0x13 idx 2 tag 0xff [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02014300 00000000 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02021362 00020010 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD9A4 usb 1-1.1: new high speed USB device using ehci_hcd and address 3 [drm] nouveau 0000:01:00.0: 0xDCC6: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: 0xDCCA: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: 0xDE87: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDEB4 usb 1-1.1: New USB device found, idVendor=058f, idProduct=6254 usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1.1: configuration #1 chosen from 1 choice hub 1-1.1:1.0: USB hub found hub 1-1.1:1.0: 4 ports detected [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xED71 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEDAF [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEFEF [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF054 [drm] nouveau 0000:01:00.0: 0xF054: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: 0xC1D3: parsing output script 0 [drm] nouveau 0000:01:00.0: 0xC5CE: parsing output script 0 usb 2-1.3: new full speed USB device using ehci_hcd and address 3 usb 2-1.3: New USB device found, idVendor=138a, idProduct=0005 usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1.3: configuration #1 chosen from 1 choice [TTM] Zone kernel: Available graphics memory: 2025292 kiB. [drm] nouveau 0000:01:00.0: 1024 MiB VRAM usb 2-1.5: new high speed USB device using ehci_hcd and address 4 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) nouveau 0000:01:00.0: firmware: requesting nouveau/nva5.ctxprog usb 2-1.5: New USB device found, idVendor=0408, idProduct=03ba usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-1.5: Product: HP Webcam usb 2-1.5: Manufacturer: QCM usb 2-1.5: SerialNumber: SN0001 usb 2-1.5: configuration #1 chosen from 1 choice nouveau 0000:01:00.0: firmware: requesting nouveau/nva5.ctxvals [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [drm] nouveau 0000:01:00.0: Detected a LVDS output [drm] nouveau 0000:01:00.0: Detected a DAC output [drm] nouveau 0000:01:00.0: Detected a TMDS output [drm] nouveau 0000:01:00.0: Detected a LVDS connector usb 2-1.7: new full speed USB device using ehci_hcd and address 5 [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a DVI-D connector usb 2-1.7: New USB device found, idVendor=03f0, idProduct=231d usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.7: Product: HP Integrated Module usb 2-1.7: Manufacturer: Broadcom Corp usb 2-1.7: configuration #1 chosen from 1 choice usb 1-1.1.1: new high speed USB device using ehci_hcd and address 4 usb 1-1.1.1: New USB device found, idVendor=058f, idProduct=6254 usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1.1.1: configuration #1 chosen from 1 choice hub 1-1.1.1:1.0: USB hub found hub 1-1.1.1:1.0: 4 ports detected usb 1-1.1.2: new low speed USB device using ehci_hcd and address 5 usb 1-1.1.2: New USB device found, idVendor=046d, idProduct=c313 usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1.2: Product: USB Multimedia Keyboard usb 1-1.1.2: Manufacturer: BTC usb 1-1.1.2: configuration #1 chosen from 1 choice input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input7 generic-usb 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-1.1.2/input0 input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/input/input8 generic-usb 0003:046D:C313.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-1.1.2/input1 usb 1-1.1.4: new low speed USB device using ehci_hcd and address 6 usb 1-1.1.4: New USB device found, idVendor=0458, idProduct=003a usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1.4: Product: Optical Mouse usb 1-1.1.4: Manufacturer: Genius usb 1-1.1.4: configuration #1 chosen from 1 choice input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input9 generic-usb 0003:0458:003A.0003: input,hidraw2: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.1.4/input0 usb 1-1.1.1.4: new full speed USB device using ehci_hcd and address 7 usb 1-1.1.1.4: New USB device found, idVendor=10c4, idProduct=ea60 usb 1-1.1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1.1.4: Product: CP2102 USB to UART Bridge Controller usb 1-1.1.1.4: Manufacturer: Silicon Labs usb 1-1.1.1.4: SerialNumber: 0001 usb 1-1.1.1.4: configuration #1 chosen from 1 choice [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x40250000, bo ffff880137948e00 fbcon: nouveaufb (fb0) is primary device [drm] nouveau 0000:01:00.0: 0xC1D7: parsing output script 1 [drm] nouveau 0000:01:00.0: 0xC06E: parsing clock script 0 Console: switching to colour frame buffer device 240x67 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 dracut: Starting plymouth daemon [drm] nouveau 0000:01:00.0: 0xC1CE: parsing clock script 1 acpi device:0b: registered as cooling_device8 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input10 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) firewire_ohci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 firewire_ohci 0000:05:00.0: setting latency timer to 64 firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10 device-mapper: multipath: version 1.1.0 loaded firewire_core: created device fw0: GUID 00241b0004a69801, S400 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. dracut: Mounted root filesystem /dev/sda6 dracut: Loading SELinux policy type=1404 audit(1268156231.881:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 154532 rules. SELinux: 8192 avtab hash slots, 154532 rules. SELinux: 8 users, 11 roles, 3080 types, 147 bools, 1 sens, 1024 cats SELinux: 75 classes, 154532 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1268156232.442:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:03:00.0: setting latency timer to 64 alloc irq_desc for 36 on node -1 alloc kstat_irqs on node -1 r8169 0000:03:00.0: irq 36 for MSI/MSI-X eth0: RTL8168d/8111d at 0xffffc900050b2000, 00:26:9e:50:8f:18, XID 083000c0 IRQ 36 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x8000-0x801f] conflicts with ACPI region SMBI [0x8000-0x800f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver cfg80211: Calling CRDA to update world regulatory domain sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:05:00.1: SDHCI controller found [197b:2382] (rev 0) sdhci-pci 0000:05:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:05:00.1: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:05:00.1] using DMA sdhci-pci 0000:05:00.2: SDHCI controller found [197b:2381] (rev 0) sdhci-pci 0000:05:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:05:00.2: Refusing to bind to secondary interface. sdhci-pci 0000:05:00.2: PCI INT A disabled jmb38x_ms 0000:05:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 jmb38x_ms 0000:05:00.3: setting latency timer to 64 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwlagn 0000:02:00.0: setting latency timer to 64 iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels alloc irq_desc for 37 on node -1 alloc kstat_irqs on node -1 iwlagn 0000:02:00.0: irq 37 for MSI/MSI-X name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 name_count maxed, losing inode data: dev=00:07, inode=13298 lis3lv02d: laptop model unknown, using default axes configuration lis3lv02d: 1-byte sensor found input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11 ACPI: WMI: Mapper loaded Registered led device: hp::hddprotect lis3lv02d driver loaded. lirc_dev: IR Remote Control driver registered, major 248 enecir 00:01: lirc_dev: driver enecir registered at minor = 0 enecir: unknown ENE chip detected, assuming KB3926D enecir: driver support incomplete enecir: chip is 0x3926 - 0x00, 0xd2 enecir: hardware features: enecir: learning and tx off, gpio40_learn off, fan_in off enecir: driver has been succesfully loaded input: HP WMI hotkeys as /devices/virtual/input/input12 HP WMI: Unknown response received HP WMI: Unknown response received Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Linux video capture interface: v2.00 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 USB Serial support registered for cp210x cp210x 1-1.1.1.4:1.0: cp210x converter detected Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba) input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input13 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) usb 1-1.1.1.4: reset full speed USB device using ehci_hcd and address 7 usb 1-1.1.1.4: cp210x converter now attached to ttyUSB0 usbcore: registered new interface driver cp210x cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0 ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0xb, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_sigmatel.c:2974: stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14 input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 input: HDA Intel Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 name_count maxed, losing inode data: dev=00:05, inode=13669 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:01:00.1: setting latency timer to 64 ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:1030: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1030: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1030: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1030: hda_generic: no PCM found name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:05, inode=12175 name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13906 phy0: Selected rate control algorithm 'iwl-agn-rs' name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13908 name_count maxed, losing inode data: dev=00:07, inode=13908 name_count maxed, losing inode data: dev=00:07, inode=13908 name_count maxed, losing inode data: dev=00:07, inode=13908 name_count maxed, losing inode data: dev=00:07, inode=13908 name_count maxed, losing inode data: dev=00:07, inode=13908 name_count maxed, losing inode data: dev=00:07, inode=13283 name_count maxed, losing inode data: dev=00:07, inode=13915 name_count maxed, losing inode data: dev=00:07, inode=13915 name_count maxed, losing inode data: dev=00:07, inode=13915 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13916 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13918 name_count maxed, losing inode data: dev=00:07, inode=13917 name_count maxed, losing inode data: dev=00:07, inode=13917 cfg80211: Calling CRDA for country: RU cfg80211: Regulatory domain changed to country: RU (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) vboxguest: VirtualBox Guest PCI device not found. vboxguest: VirtualBox Guest PCI device not found. EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-0, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda7, type ext3), uses xattr Adding 16383988k swap on /dev/sda8. Priority:-1 extents:1 across:16383988k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3 platform microcode: firmware: requesting intel-ucode/06-1e-05 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard KQEMU installed, max_locked_mem=2025292kB. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ppdev: user-space parallel port driver iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready r8169: eth0: link up r8169: eth0: link up RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 8 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa048fd80 vboxdrv: fAsync=0 offMin=0x162 offMax=0x17814 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001). Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 eth0: no IPv6 routers present usb 1-1.1.4: USB disconnect, address 6 virbr0: starting userspace STP failed, starting kernel STP btusb_intr_complete: hci0 urb ffff880137b2b480 failed to resubmit (1) btusb_bulk_complete: hci0 urb ffff8801365996c0 failed to resubmit (1) btusb_bulk_complete: hci0 urb ffff880137b2bf00 failed to resubmit (1) [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: DATA_ERROR, nStatus: [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 2/5 Class 0x8597 Mthd 0x16b0 Data 0x00000000:0x00000000 SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs lo: Disabled Privacy Extensions SELinux: initialized (dev proc, type proc), uses genfs_contexts [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: DATA_ERROR, nStatus: [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 2/5 Class 0x8597 Mthd 0x16b0 Data 0x00000000:0x00000000 type=1305 audit(1268145480.828:42327): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU2 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU4 attaching NULL sched-domain. CPU5 attaching NULL sched-domain. CPU6 attaching NULL sched-domain. CPU7 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 (cpu_power = 589) 1 (cpu_power = 589) domain 1: span 0-7 level MC groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 (cpu_power = 589) 0 (cpu_power = 589) domain 1: span 0-7 level MC groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) CPU2 attaching sched-domain: domain 0: span 2-3 level SIBLING groups: 2 (cpu_power = 589) 3 (cpu_power = 589) domain 1: span 0-7 level MC groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) CPU3 attaching sched-domain: domain 0: span 2-3 level SIBLING groups: 3 (cpu_power = 589) 2 (cpu_power = 589) domain 1: span 0-7 level MC groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) CPU4 attaching sched-domain: domain 0: span 4-5 level SIBLING groups: 4 (cpu_power = 589) 5 (cpu_power = 589) domain 1: span 0-7 level MC groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) CPU5 attaching sched-domain: domain 0: span 4-5 level SIBLING groups: 5 (cpu_power = 589) 4 (cpu_power = 589) domain 1: span 0-7 level MC groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) CPU6 attaching sched-domain: domain 0: span 6-7 level SIBLING groups: 6 (cpu_power = 589) 7 (cpu_power = 589) domain 1: span 0-7 level MC groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) CPU7 attaching sched-domain: domain 0: span 6-7 level SIBLING groups: 7 (cpu_power = 589) 6 (cpu_power = 589) domain 1: span 0-7 level MC groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) CE: hpet increasing min_delta_ns to 33750 nsec fuse init (API version 7.13) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts process `skype' is using obsolete setsockopt SO_BSDCOMPAT usb 1-1.1.4: new low speed USB device using ehci_hcd and address 8 usb 1-1.1.4: New USB device found, idVendor=0458, idProduct=003a usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1.4: Product: Optical Mouse usb 1-1.1.4: Manufacturer: Genius usb 1-1.1.4: configuration #1 chosen from 1 choice input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input17 generic-usb 0003:0458:003A.0004: input,hidraw2: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.1.4/input0