[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.33.1-gcc (root@laptop) (gcc version 4.4.3 (Gentoo 4.4.3 p1.0) ) #1 SMP Wed Mar 17 15:22:15 CET 2010 [ 0.000000] Command line: BOOT_IMAGE=/kernel-2.6.33.1-gcc root=/dev/sda2 drm.debug=0x04 ro initrd_encmode=dm-crypt initrd_util=gpgfile:/dev/sdb1:ext2:/rootkey.gpg initrd_devices=/dev/sda2 initrd_dmnames=sda2_crypt rootfstype=ext4 initrd_kmap=/etc/it-amd64.bin [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bbaa1000 (usable) [ 0.000000] BIOS-e820: 00000000bbaa1000 - 00000000bbaa7000 (reserved) [ 0.000000] BIOS-e820: 00000000bbaa7000 - 00000000bbbbd000 (usable) [ 0.000000] BIOS-e820: 00000000bbbbd000 - 00000000bbc0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bbc0f000 - 00000000bbd08000 (usable) [ 0.000000] BIOS-e820: 00000000bbd08000 - 00000000bbf0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bbf0f000 - 00000000bbf18000 (usable) [ 0.000000] BIOS-e820: 00000000bbf18000 - 00000000bbf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000bbf1f000 - 00000000bbf64000 (usable) [ 0.000000] BIOS-e820: 00000000bbf64000 - 00000000bbf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bbf9f000 - 00000000bc000000 (ACPI data) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-D7FFF uncachable [ 0.000000] D8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3GB, range: 1GB, type UC [ 0.000000] reg 1, base: 3040MB, range: 32MB, type UC [ 0.000000] reg 2, base: 0GB, range: 4GB, type WB [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] total RAM covered: 4064M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3040MB, range: 32MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbbf64 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f7360] f7360 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bbf64000 [ 0.000000] 0000000000 - 00bbe00000 page 2M [ 0.000000] 00bbe00000 - 00bbf64000 page 4k [ 0.000000] kernel direct mapping tables up to bbf64000 @ 16000-1b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ 19000-1f000 [ 0.000000] RAMDISK: 37cbf000 - 37fef321 [ 0.000000] ACPI: RSDP 00000000000f72c0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bbff7001 00074 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bbfe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bbfe8000 07ACB (v02 Intel CANTIGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000bbf9efc0 00040 [ 0.000000] ACPI: HPET 00000000bbffed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bbffedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000bbffedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bbffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000bbffee8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000bbff709d 000B6 (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bbfe6000 005F9 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bbfe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bbfe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000001a000 - 0000000000022fff] [ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28 [ 0.000000] (13 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 00017c2b84] TEXT DATA BSS ==> [0001000000 - 00017c2b84] [ 0.000000] #2 [0037cbf000 - 0037fef321] RAMDISK ==> [0037cbf000 - 0037fef321] [ 0.000000] #3 [00017c3000 - 00017c31e0] BRK ==> [00017c3000 - 00017c31e0] [ 0.000000] #4 [00000f7370 - 0000100000] BIOS reserved ==> [00000f7370 - 0000100000] [ 0.000000] #5 [00000f7360 - 00000f7370] MP-table mpf ==> [00000f7360 - 00000f7370] [ 0.000000] #6 [000009e400 - 000009e871] BIOS reserved ==> [000009e400 - 000009e871] [ 0.000000] #7 [000009e9ed - 00000f7360] BIOS reserved ==> [000009e9ed - 00000f7360] [ 0.000000] #8 [000009e871 - 000009e9ed] MP-table mpc ==> [000009e871 - 000009e9ed] [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] [ 0.000000] #11 [0000016000 - 0000019000] PGTABLE ==> [0000016000 - 0000019000] [ 0.000000] #12 [0000019000 - 000001a000] PGTABLE ==> [0000019000 - 000001a000] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bbaa1 [ 0.000000] 0: 0x000bbaa7 -> 0x000bbbbd [ 0.000000] 0: 0x000bbc0f -> 0x000bbd08 [ 0.000000] 0: 0x000bbf0f -> 0x000bbf18 [ 0.000000] 0: 0x000bbf1f -> 0x000bbf64 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1031308 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 750902 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bbaa1000 - 00000000bbaa7000 [ 0.000000] PM: Registered nosave memory: 00000000bbbbd000 - 00000000bbc0f000 [ 0.000000] PM: Registered nosave memory: 00000000bbd08000 - 00000000bbf0f000 [ 0.000000] PM: Registered nosave memory: 00000000bbf18000 - 00000000bbf1f000 [ 0.000000] PM: Registered nosave memory: 00000000bbf64000 - 00000000bbf9f000 [ 0.000000] PM: Registered nosave memory: 00000000bbf9f000 - 00000000bc000000 [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:44000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005200000 s90520 r8192 d24168 u1048576 [ 0.000000] pcpu-alloc: s90520 r8192 d24168 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013281 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-2.6.33.1-gcc root=/dev/sda2 drm.debug=0x04 ro initrd_encmode=dm-crypt initrd_util=gpgfile:/dev/sdb1:ext2:/rootkey.gpg initrd_devices=/dev/sda2 initrd_dmnames=sda2_crypt rootfstype=ext4 initrd_kmap=/etc/it-amd64.bin [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3990044k/5242880k available (3988k kernel code, 1117648k absent, 135188k reserved, 2353k data, 608k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1396.516 MHz processor. [ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.03 BogoMIPS (lpj=1396516) [ 0.001162] Security Framework initialized [ 0.001227] SELinux: Disabled at boot. [ 0.002175] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004748] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006009] Mount-cache hash table entries: 256 [ 0.006260] Initializing cgroup subsys ns [ 0.006324] Initializing cgroup subsys cpuacct [ 0.006388] Initializing cgroup subsys devices [ 0.006450] Initializing cgroup subsys freezer [ 0.006513] Initializing cgroup subsys net_cls [ 0.006605] CPU: Physical Processor ID: 0 [ 0.006665] CPU: Processor Core ID: 0 [ 0.006727] mce: CPU supports 6 MCE banks [ 0.006795] CPU0: Thermal monitoring enabled (TM2) [ 0.006859] using mwait in idle threads. [ 0.006920] Performance Events: Core2 events, Intel PMU driver. [ 0.007065] ... version: 2 [ 0.007126] ... bit width: 40 [ 0.007187] ... generic registers: 2 [ 0.007247] ... value mask: 000000ffffffffff [ 0.007310] ... max period: 000000007fffffff [ 0.007373] ... fixed-purpose events: 3 [ 0.007434] ... event mask: 0000000700000003 [ 0.009216] ACPI: Core revision 20091214 [ 0.025071] Setting APIC routing to flat [ 0.025488] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.036163] CPU0: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz stepping 06 [ 0.036999] Booting Node 0, Processors #1 Ok. [ 0.108020] Brought up 2 CPUs [ 0.108082] Total of 2 processors activated (5585.90 BogoMIPS). [ 0.109096] devtmpfs: initialized [ 0.114197] regulator: core version 0.5 [ 0.114197] NET: Registered protocol family 16 [ 0.114350] ACPI: bus type pci registered [ 0.115096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.115177] PCI: not using MMCONFIG [ 0.116002] PCI: Using configuration type 1 for base access [ 0.117057] bio: create slab at 0 [ 0.119334] ACPI: EC: Look up EC in DSDT [ 0.125254] ACPI: BIOS _OSI(Linux) query ignored [ 0.129128] ACPI: Interpreter enabled [ 0.129191] ACPI: (supports S0 S3 S4 S5) [ 0.129453] ACPI: Using IOAPIC for interrupt routing [ 0.129591] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.133457] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.151461] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.160569] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.160743] ACPI: Power Resource [FN00] (off) [ 0.160870] ACPI: Power Resource [FN01] (off) [ 0.161874] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.162619] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.162726] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.164100] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.164105] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.164109] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.164113] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.164117] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.164122] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) [ 0.164161] DMAR: Forcing write-buffer flush capability [ 0.164262] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc3fffff 64bit] [ 0.164271] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.164278] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.164324] pci 0000:00:02.1: reg 10: [mem 0xfc400000-0xfc4fffff 64bit] [ 0.164455] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] [ 0.164554] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] [ 0.164652] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f] [ 0.164744] pci 0000:00:1a.7: reg 10: [mem 0xfc704800-0xfc704bff] [ 0.164819] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.164826] pci 0000:00:1a.7: PME# disabled [ 0.164877] pci 0000:00:1b.0: reg 10: [mem 0xfc700000-0xfc703fff 64bit] [ 0.164945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.164951] pci 0000:00:1b.0: PME# disabled [ 0.165066] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.165072] pci 0000:00:1c.0: PME# disabled [ 0.165185] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.165191] pci 0000:00:1c.2: PME# disabled [ 0.165300] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.165306] pci 0000:00:1c.3: PME# disabled [ 0.165388] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f] [ 0.165486] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf] [ 0.165586] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df] [ 0.165679] pci 0000:00:1d.7: reg 10: [mem 0xfc704c00-0xfc704fff] [ 0.165754] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.165761] pci 0000:00:1d.7: PME# disabled [ 0.166018] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f] [ 0.166027] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] [ 0.166037] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817] [ 0.166046] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] [ 0.166056] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] [ 0.166065] pci 0000:00:1f.2: reg 24: [mem 0xfc704000-0xfc7047ff] [ 0.166119] pci 0000:00:1f.2: PME# supported from D3hot [ 0.166125] pci 0000:00:1f.2: PME# disabled [ 0.166171] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] [ 0.166193] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.166331] pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf6001fff 64bit] [ 0.166481] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.166509] pci 0000:02:00.0: PME# disabled [ 0.166613] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.166679] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.166686] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.166696] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.166758] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.166824] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.166830] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.166840] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.167156] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa003fff 64bit] [ 0.167208] pci 0000:06:00.0: reg 18: [io 0x4000-0x40ff] [ 0.167412] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.167737] pci 0000:06:00.0: supports D1 D2 [ 0.167740] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167766] pci 0000:06:00.0: PME# disabled [ 0.167914] pci 0000:00:1c.3: PCI bridge to [bus 06-07] [ 0.168005] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.168012] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff] [ 0.168022] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.168094] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) [ 0.168205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.168547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.168677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.168789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.189474] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) [ 0.189820] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.190156] ACPI: PCI Interrupt Link [LNKC] (IRQs *5) [ 0.190498] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.190840] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. [ 0.191253] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 0.191595] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.191937] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.192279] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.192373] vgaarb: loaded [ 0.192536] SCSI subsystem initialized [ 0.192621] libata version 3.00 loaded. [ 0.192621] usbcore: registered new interface driver usbfs [ 0.192621] usbcore: registered new interface driver hub [ 0.192621] usbcore: registered new device driver usb [ 0.193052] PCI: Using ACPI for IRQ routing [ 0.193115] PCI: pci_cache_line_size set to 64 bytes [ 0.193415] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.193487] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.193763] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.196008] Switching to clocksource tsc [ 0.198647] pnp: PnP ACPI init [ 0.198716] ACPI: bus type pnp registered [ 0.202026] pnp: PnP ACPI: found 11 devices [ 0.202088] ACPI: ACPI bus type pnp unregistered [ 0.202163] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.202234] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.202300] system 00:05: [io 0x0480-0x048f] has been reserved [ 0.202366] system 00:05: [io 0xffff] has been reserved [ 0.202430] system 00:05: [io 0xffff] has been reserved [ 0.202494] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.202559] system 00:05: [io 0x0480-0x048f] has been reserved [ 0.202624] system 00:05: [io 0x1180-0x11ff] has been reserved [ 0.202689] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.202754] system 00:05: [io 0x5000-0x500f] has been reserved [ 0.202825] system 00:05: [io 0xfe00] has been reserved [ 0.202893] system 00:06: [io 0x06a0-0x06af] has been reserved [ 0.202958] system 00:06: [io 0x06b0-0x06ff] has been reserved [ 0.203028] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.203094] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.203160] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.203226] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.203293] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.203360] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.203427] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.203496] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.208418] pci 0000:00:1f.3: BAR 0: assigned [mem 0xbc000000-0xbc0000ff 64bit] [ 0.208503] pci 0000:00:1f.3: BAR 0: set to [mem 0xbc000000-0xbc0000ff 64bit] (PCI address [0xbc000000-0xbc0000ff] [ 0.208586] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.208651] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.208721] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.208793] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.208877] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.208942] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.209010] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.209079] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.209164] pci 0000:06:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref] [ 0.209241] pci 0000:00:1c.3: PCI bridge to [bus 06-07] [ 0.209306] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.209376] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff] [ 0.209444] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.209527] pci 0000:00:1e.0: PCI bridge to [bus 08-08] [ 0.209589] pci 0000:00:1e.0: bridge window [io disabled] [ 0.209657] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.209723] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.209806] alloc irq_desc for 17 on node -1 [ 0.209809] alloc kstat_irqs on node -1 [ 0.209815] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.209884] pci 0000:00:1c.0: setting latency timer to 64 [ 0.209895] alloc irq_desc for 18 on node -1 [ 0.209897] alloc kstat_irqs on node -1 [ 0.209902] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.209970] pci 0000:00:1c.2: setting latency timer to 64 [ 0.209981] alloc irq_desc for 19 on node -1 [ 0.209984] alloc kstat_irqs on node -1 [ 0.209989] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.210057] pci 0000:00:1c.3: setting latency timer to 64 [ 0.210066] pci 0000:00:1e.0: setting latency timer to 64 [ 0.210072] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.210075] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.210079] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.210082] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.210086] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.210090] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.210093] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.210097] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.210100] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.210104] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.210107] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.210111] pci_bus 0000:08: resource 3 [io 0x0000-0xffff] [ 0.210115] pci_bus 0000:08: resource 4 [mem 0x00000000-0xffffffffffffffff] [ 0.210141] NET: Registered protocol family 2 [ 0.210388] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.211990] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.216700] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.217369] TCP: Hash tables configured (established 524288 bind 65536) [ 0.217435] TCP reno registered [ 0.217508] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.217618] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.217852] NET: Registered protocol family 1 [ 0.217935] pci 0000:00:02.0: Boot video device [ 0.218182] PCI: CLS 64 bytes, default 64 [ 0.218259] Unpacking initramfs... [ 0.324662] Freeing initrd memory: 3264k freed [ 0.326116] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.326187] Placing 64MB software IO TLB between ffff88000531e000 - ffff88000931e000 [ 0.326266] software IO TLB at phys 0x531e000 - 0x931e000 [ 0.326391] Simple Boot Flag at 0x37 set to 0x1 [ 0.327033] audit: initializing netlink socket (disabled) [ 0.327112] type=2000 audit(1268925031.326:1): initialized [ 0.327541] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.329705] VFS: Disk quotas dquot_6.5.2 [ 0.329836] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.330483] msgmni has been set to 7799 [ 0.331066] alg: No test for stdrng (krng) [ 0.331195] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.331275] io scheduler noop registered [ 0.331337] io scheduler deadline registered [ 0.331482] io scheduler cfq registered (default) [ 0.331649] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.331703] alloc irq_desc for 24 on node -1 [ 0.331706] alloc kstat_irqs on node -1 [ 0.331722] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.331847] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.331898] alloc irq_desc for 25 on node -1 [ 0.331901] alloc kstat_irqs on node -1 [ 0.331912] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X [ 0.332033] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.332083] alloc irq_desc for 26 on node -1 [ 0.332086] alloc kstat_irqs on node -1 [ 0.332097] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.332651] ACPI: AC Adapter [ADP1] (on-line) [ 0.332844] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.332985] ACPI: Lid Switch [LID0] [ 0.333104] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.333189] ACPI: Power Button [PWRB] [ 0.333311] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.333391] ACPI: Sleep Button [SLPB] [ 0.333508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.333587] ACPI: Power Button [PWRF] [ 0.334376] ACPI: SSDT 00000000bbf1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.335596] ACPI: SSDT 00000000bbf18020 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.339653] Monitor-Mwait will be used to enter C-1 state [ 0.339683] Monitor-Mwait will be used to enter C-2 state [ 0.339710] Monitor-Mwait will be used to enter C-3 state [ 0.339720] Marking TSC unstable due to TSC halts in idle [ 0.339835] Switching to clocksource hpet [ 0.340568] ACPI: SSDT 00000000bbf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.341484] ACPI: SSDT 00000000bbf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.350540] Linux agpgart interface v0.103 [ 0.350694] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.352328] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 0.355108] ACPI: Battery Slot [BAT1] (battery present) [ 0.382881] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.383013] [drm] Initialized drm 1.1.0 20060810 [ 0.383102] alloc irq_desc for 16 on node -1 [ 0.383105] alloc kstat_irqs on node -1 [ 0.383114] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.383183] i915 0000:00:02.0: setting latency timer to 64 [ 0.409299] alloc irq_desc for 27 on node -1 [ 0.409304] alloc kstat_irqs on node -1 [ 0.409316] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 0.409324] [drm] set up 31M of stolen space [ 0.430016] [drm:g4x_disable_fbc], disabled FBC [ 0.430056] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 0.430063] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 0.430067] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 65800 1280 1292 1322 1354 800 803 806 810 0x8 0x0 [ 0.430084] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 0.430103] [drm:intel_modeset_init], 2 display pipes available. [ 0.532637] [drm:intel_setup_outputs], probing SDVOB [ 0.537167] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 0.537171] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 0.537193] [drm:intel_setup_outputs], probing HDMI on SDVOB [ 0.537311] [drm:intel_setup_outputs], probing DP_B [ 0.537342] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 0.539861] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.539864] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.542380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.542383] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.542406] [drm:intel_setup_outputs], probing SDVOC [ 0.546948] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 0.546952] [drm:intel_sdvo_init], No SDVO device found on SDVOC [ 0.546970] [drm:intel_setup_outputs], probing HDMI on SDVOC [ 0.547084] [drm:intel_setup_outputs], probing DP_C [ 0.547115] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 0.549631] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.549634] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.552149] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.552153] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.552175] [drm:intel_setup_outputs], probing DP_D [ 0.552206] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 0.554722] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.554725] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.557240] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 0.557244] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.925020] [drm:g4x_disable_fbc], disabled FBC [ 0.967174] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 0.975015] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 0.975020] [drm:drm_helper_probe_single_connector_modes], LVDS-1 [ 1.077387] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1 [ 1.077391] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 1.077398] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 1.081863] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 1.081867] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 1.081871] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 1.081875] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 1.105002] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 1.105006] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 1.105010] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 1.105015] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 1.107531] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 1.107535] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 1.107539] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 1.107549] [drm:intel_update_watermarks], plane A (pipe 0) clock: 107520 [ 1.128020] [drm:g4x_disable_fbc], disabled FBC [ 1.149834] [drm:intel_crtc_mode_set], Mode for pipe A: [ 1.149838] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 1.150296] [drm:intel_crtc_mode_set], disabling CxSR downclocking [ 1.171018] [drm:intel_pipe_set_base], No FB bound [ 1.171022] [drm:intel_update_watermarks], plane A (pipe 0) clock: 107520 [ 1.192037] [drm:intel_update_watermarks], plane A (pipe 0) clock: 107520 [ 1.255018] [drm:intel_tv_detect_type], Detected S-Video TV connection [ 1.276018] [drm:g4x_disable_fbc], disabled FBC [ 1.318174] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1 [ 1.318178] [drm:drm_mode_debug_printmodeline], Modeline 41:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 1.318185] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0 [ 1.318191] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [ 1.318198] [drm:drm_mode_debug_printmodeline], Modeline 39:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0 [ 1.318204] [drm:drm_setup_crtcs], [ 1.318208] [drm:drm_enable_connectors], connector 5 enabled? no [ 1.318212] [drm:drm_enable_connectors], connector 7 enabled? yes [ 1.318215] [drm:drm_enable_connectors], connector 13 enabled? no [ 1.318219] [drm:drm_enable_connectors], connector 15 enabled? no [ 1.318222] [drm:drm_enable_connectors], connector 17 enabled? no [ 1.318226] [drm:drm_enable_connectors], connector 19 enabled? no [ 1.318230] [drm:drm_enable_connectors], connector 21 enabled? no [ 1.318233] [drm:drm_enable_connectors], connector 23 enabled? yes [ 1.318237] [drm:drm_target_preferred], looking for cmdline mode on connector 7 [ 1.318240] [drm:drm_target_preferred], looking for preferred mode on connector 7 [ 1.318244] [drm:drm_target_preferred], found mode 1280x800 [ 1.318247] [drm:drm_target_preferred], looking for cmdline mode on connector 23 [ 1.318260] [drm:drm_target_preferred], looking for preferred mode on connector 23 [ 1.318263] [drm:drm_target_preferred], found mode 848x480 [ 1.318267] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.318273] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 4 [ 1.318277] [drm:drm_setup_crtcs], desired mode 848x480 set on crtc 3 [ 1.318281] [drm:intelfb_probe], [ 1.323656] [drm:intelfb_create], allocated 1280x800 fb: 0x02030000, bo ffff88013d816600 [ 1.325329] [drm:drm_crtc_helper_set_config], [ 1.325332] [drm:drm_crtc_helper_set_config], crtc: ffff88013e370800 3 fb: ffff88013d816840 connectors: ffff88013fc15160 num_connectors: 1 (x, y) (0, 0) [ 1.325346] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 1.325349] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 1.325352] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [ 1.325358] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 1.325365] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 1.325368] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 1.325372] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 1.325375] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 1.325387] [drm:intel_update_watermarks], plane A (pipe 0) clock: 14513 [ 1.346021] [drm:g4x_disable_fbc], disabled FBC [ 1.368111] [drm:intel_crtc_mode_set], Mode for pipe A: [ 1.368114] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 1.368572] [drm:intel_crtc_mode_set], disabling CxSR downclocking [ 1.389018] [drm:intel_pipe_set_base], Writing base 02030000 00000000 0 0 [ 1.389023] [drm:intel_update_fbc], framebuffer not tiled, disabling compression [ 1.389026] [drm:intel_update_fbc], unsupported config, disabling FBC [ 1.410019] [drm:intel_update_fbc], framebuffer not tiled, disabling compression [ 1.410022] [drm:intel_update_fbc], unsupported config, disabling FBC [ 1.410025] [drm:intel_update_watermarks], plane A (pipe 0) clock: 14513 [ 1.431037] [drm:intel_update_watermarks], plane A (pipe 0) clock: 14513 [ 1.431069] [drm:intel_update_fbc], framebuffer not tiled, disabling compression [ 1.431072] [drm:intel_update_fbc], unsupported config, disabling FBC [ 1.431080] [drm:drm_crtc_helper_set_config], [ 1.431082] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013d816840 connectors: ffff88013fc15180 num_connectors: 1 (x, y) (0, 0) [ 1.431092] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 1.431095] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 1.431098] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.431103] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 1.431109] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 1.431113] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 1.431116] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 1.431119] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 1.431131] [drm:intel_update_watermarks], plane A (pipe 0) clock: 14513 [ 1.431134] [drm:intel_update_watermarks], plane B (pipe 1) clock: 65800 [ 1.452169] [drm:intel_crtc_mode_set], using SSC reference clock of 100 MHz [ 1.452378] [drm:intel_crtc_mode_set], Mode for pipe B: [ 1.452381] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 1.452839] [drm:intel_crtc_mode_set], disabling CxSR downclocking [ 1.473020] [drm:intel_pipe_set_base], Writing base 02030000 00000000 0 0 [ 1.473024] [drm:intel_update_fbc], framebuffer not tiled, disabling compression [ 1.473027] [drm:intel_update_fbc], unsupported config, disabling FBC [ 1.494018] [drm:intel_update_fbc], framebuffer not tiled, disabling compression [ 1.494021] [drm:intel_update_fbc], unsupported config, disabling FBC [ 1.494024] [drm:intel_update_watermarks], plane A (pipe 0) clock: 14513 [ 1.494028] [drm:intel_update_watermarks], plane B (pipe 1) clock: 65800 [ 1.494033] [drm:intel_update_watermarks], plane A (pipe 0) clock: 14513 [ 1.494036] [drm:intel_update_watermarks], plane B (pipe 1) clock: 65800 [ 1.494068] [drm:intel_update_fbc], framebuffer not tiled, disabling compression [ 1.494071] [drm:intel_update_fbc], unsupported config, disabling FBC [ 1.567143] [drm:drm_crtc_helper_set_config], [ 1.567146] [drm:drm_crtc_helper_set_config], crtc: ffff88013e370800 3 fb: ffff88013d816840 connectors: ffff88013fc15160 num_connectors: 1 (x, y) (0, 0) [ 1.567158] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 1.567162] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 1.567167] [drm:drm_crtc_helper_set_config], [ 1.567169] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013d816840 connectors: ffff88013fc15180 num_connectors: 1 (x, y) (0, 0) [ 1.567178] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 1.567181] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 1.568978] Console: switching to colour frame buffer device 106x30 [ 1.568985] [drm:drm_crtc_helper_set_config], [ 1.568987] [drm:drm_crtc_helper_set_config], crtc: ffff88013e370800 3 fb: ffff88013d816840 connectors: ffff88013fc15160 num_connectors: 1 (x, y) (0, 0) [ 1.568997] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 1.569009] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 1.569013] [drm:drm_crtc_helper_set_config], [ 1.569015] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013d816840 connectors: ffff88013fc15180 num_connectors: 1 (x, y) (0, 0) [ 1.569025] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 1.569028] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 1.570876] fb0: inteldrmfb frame buffer device [ 1.570878] registered panic notifier [ 1.572933] ACPI Warning: _BQC returned an invalid level (20091214/video-638) [ 1.574182] acpi device:08: registered as cooling_device2 [ 1.574457] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 1.574833] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.575287] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.575741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.576672] input: Macintosh mouse button emulation as /devices/virtual/input/input5 [ 1.577309] ahci 0000:00:1f.2: version 3.0 [ 1.577325] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.577928] alloc irq_desc for 28 on node -1 [ 1.577931] alloc kstat_irqs on node -1 [ 1.577944] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.577991] ahci: SSS flag set, parallel bus scan disabled [ 1.578627] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.579274] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 1.579972] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.586080] scsi0 : ahci [ 1.586885] scsi1 : ahci [ 1.587681] scsi2 : ahci [ 1.588476] scsi3 : ahci [ 1.589283] scsi4 : ahci [ 1.590092] scsi5 : ahci [ 1.590881] ata1: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704100 irq 28 [ 1.591697] ata2: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704180 irq 28 [ 1.592519] ata3: DUMMY [ 1.593358] ata4: DUMMY [ 1.594199] ata5: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704300 irq 28 [ 1.595121] ata6: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704380 irq 28 [ 1.596080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.597067] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.598074] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.598079] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.599114] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.600165] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.605042] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.605059] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc704800 [ 1.615022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.616032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.617014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.617974] usb usb1: Product: EHCI Host Controller [ 1.618905] usb usb1: Manufacturer: Linux 2.6.33.1-gcc ehci_hcd [ 1.619831] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.620858] hub 1-0:1.0: USB hub found [ 1.621758] hub 1-0:1.0: 6 ports detected [ 1.622690] alloc irq_desc for 23 on node -1 [ 1.622692] alloc kstat_irqs on node -1 [ 1.622700] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.623587] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.623592] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.624441] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.625314] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.630014] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.630031] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc704c00 [ 1.640022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.640889] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.641779] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.642683] usb usb2: Product: EHCI Host Controller [ 1.643595] usb usb2: Manufacturer: Linux 2.6.33.1-gcc ehci_hcd [ 1.644504] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.645535] hub 2-0:1.0: USB hub found [ 1.646449] hub 2-0:1.0: 6 ports detected [ 1.647453] uhci_hcd: USB Universal Host Controller Interface driver [ 1.648432] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.649385] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.649390] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.650321] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.651290] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.652253] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.653186] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.654117] usb usb3: Product: UHCI Host Controller [ 1.655047] usb usb3: Manufacturer: Linux 2.6.33.1-gcc uhci_hcd [ 1.655983] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.657044] hub 3-0:1.0: USB hub found [ 1.657980] hub 3-0:1.0: 2 ports detected [ 1.658960] alloc irq_desc for 21 on node -1 [ 1.658963] alloc kstat_irqs on node -1 [ 1.658969] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.659915] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.659919] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.660855] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.661838] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.662833] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.663790] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.664744] usb usb4: Product: UHCI Host Controller [ 1.665690] usb usb4: Manufacturer: Linux 2.6.33.1-gcc uhci_hcd [ 1.666645] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.667704] hub 4-0:1.0: USB hub found [ 1.668680] hub 4-0:1.0: 2 ports detected [ 1.669669] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.670631] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.670635] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.671586] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.672571] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 1.673558] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.674532] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.675513] usb usb5: Product: UHCI Host Controller [ 1.676480] usb usb5: Manufacturer: Linux 2.6.33.1-gcc uhci_hcd [ 1.677451] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.678511] hub 5-0:1.0: USB hub found [ 1.679472] hub 5-0:1.0: 2 ports detected [ 1.680470] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.681437] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.681441] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.682401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.683384] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 1.684369] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.685329] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.686296] usb usb6: Product: UHCI Host Controller [ 1.687277] usb usb6: Manufacturer: Linux 2.6.33.1-gcc uhci_hcd [ 1.688234] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.689307] hub 6-0:1.0: USB hub found [ 1.690271] hub 6-0:1.0: 2 ports detected [ 1.691270] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.692230] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.692234] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.693189] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.694177] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 1.695163] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.696126] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.697099] usb usb7: Product: UHCI Host Controller [ 1.698079] usb usb7: Manufacturer: Linux 2.6.33.1-gcc uhci_hcd [ 1.699051] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.700114] hub 7-0:1.0: USB hub found [ 1.701079] hub 7-0:1.0: 2 ports detected [ 1.702090] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.703050] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.703055] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.704068] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.705063] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 1.706057] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.707019] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.707983] usb usb8: Product: UHCI Host Controller [ 1.708954] usb usb8: Manufacturer: Linux 2.6.33.1-gcc uhci_hcd [ 1.709919] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.710975] hub 8-0:1.0: USB hub found [ 1.711939] hub 8-0:1.0: 2 ports detected [ 1.712945] Initializing USB Mass Storage driver... [ 1.713939] usbcore: registered new interface driver usb-storage [ 1.714883] USB Mass Storage support registered. [ 1.715863] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.719163] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.721855] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.722867] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.723860] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.724821] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.725756] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.726769] mice: PS/2 mouse device common for all mice [ 1.727764] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.728703] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.729723] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.730663] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] [ 1.732556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.734743] device-mapper: uevent: version 1.0.3 [ 1.735907] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com [ 1.737188] cpuidle: using governor ladder [ 1.738428] cpuidle: using governor menu [ 1.739488] No iBFT detected. [ 1.740784] TCP cubic registered [ 1.741898] NET: Registered protocol family 10 [ 1.743328] lo: Disabled Privacy Extensions [ 1.744570] Mobile IPv6 [ 1.745525] NET: Registered protocol family 17 [ 1.746667] registered taskstats version 1 [ 1.748243] rtc_cmos 00:07: setting system clock to 2010-03-18 15:10:33 UTC (1268925033) [ 1.752568] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 1.901171] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.924314] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.941978] ata1.00: ATA-8: TOSHIBA MK1216GSG, RS013A, max UDMA/100 [ 1.943001] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.945144] ata1.00: configured for UDMA/100 [ 1.957171] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1216GS RS01 PQ: 0 ANSI: 5 [ 1.958494] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.959695] sd 0:0:0:0: [sda] Write Protect is off [ 1.960842] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.960888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.962290] sda: sda1 sda2 [ 2.016152] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.263064] ata2: SATA link down (SStatus 0 SControl 300) [ 2.580062] ata5: SATA link down (SStatus 0 SControl 300) [ 2.582539] usb 1-3: New USB device found, idVendor=174f, idProduct=5932 [ 2.583641] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.687168] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.803192] usb 2-1: New USB device found, idVendor=13fe, idProduct=2240 [ 2.804241] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.805314] usb 2-1: Product: USB Carder [ 2.806292] usb 2-1: Manufacturer: [ 2.807346] usb 2-1: SerialNumber: 123456789ABC [ 2.808724] scsi6 : usb-storage 2-1:1.0 [ 2.898152] ata6: SATA link down (SStatus 0 SControl 300) [ 2.910194] Freeing unused kernel memory: 608k freed [ 3.160150] usb 8-2: new full speed USB device using uhci_hcd and address 2 [ 3.322158] usb 8-2: New USB device found, idVendor=0a5c, idProduct=2101 [ 3.323247] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.324342] usb 8-2: Product: BCM92045NMD [ 3.324345] usb 8-2: Manufacturer: Broadcom Corp [ 3.324347] usb 8-2: SerialNumber: 002269EABD6A [ 7.809749] scsi 6:0:0:0: Direct-Access USB Reader 0001 PQ: 0 ANSI: 0 CCS [ 8.797540] sd 6:0:0:0: [sdb] 7733248 512-byte logical blocks: (3.95 GB/3.68 GiB) [ 8.799092] sd 6:0:0:0: [sdb] Write Protect is off [ 8.800091] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 8.800095] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8.819524] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8.820459] sdb: sdb1 sdb2 [ 8.842550] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8.843539] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 19.727866] [drm:drm_crtc_helper_set_config], [ 19.727869] [drm:drm_crtc_helper_set_config], crtc: ffff88013e370800 3 fb: ffff88013d816840 connectors: ffff88013fc15160 num_connectors: 1 (x, y) (0, 0) [ 19.727886] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 19.727890] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 19.727894] [drm:drm_crtc_helper_set_config], [ 19.727897] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013d816840 connectors: ffff88013fc15180 num_connectors: 1 (x, y) (0, 0) [ 19.727906] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 19.727909] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 20.758279] alg: No test for cbc(serpent) (cbc(serpent-generic)) [ 21.259061] EXT4-fs (dm-2): mounted filesystem with ordered data mode [ 24.631510] udev: starting version 149 [ 24.893712] thermal LNXTHERM:01: registered as thermal_zone0 [ 24.893724] ACPI: Thermal Zone [TZ00] (51 C) [ 24.894731] thermal LNXTHERM:02: registered as thermal_zone1 [ 24.894741] ACPI: Thermal Zone [TZ01] (51 C) [ 24.953506] ACPI: Fan [FAN0] (off) [ 24.953654] ACPI: Fan [FAN1] (off) [ 25.074512] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.075188] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 25.130669] cfg80211: Using static regulatory domain info [ 25.130672] cfg80211: Regulatory domain: 00 [ 25.130675] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.130679] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 25.130683] (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 25.130687] (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 25.130690] (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 25.130694] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 25.130920] cfg80211: Calling CRDA to update world regulatory domain [ 25.143877] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 25.144367] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460) [ 25.144744] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 25.156971] Bluetooth: Core ver 2.15 [ 25.157040] NET: Registered protocol family 31 [ 25.157042] Bluetooth: HCI device and connection manager initialized [ 25.157046] Bluetooth: HCI socket layer initialized [ 25.324357] sky2 driver version 1.26 [ 25.324444] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 25.324495] sky2 0000:06:00.0: setting latency timer to 64 [ 25.324626] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3 [ 25.325263] alloc irq_desc for 29 on node -1 [ 25.325266] alloc kstat_irqs on node -1 [ 25.325335] sky2 0000:06:00.0: irq 29 for MSI/MSI-X [ 25.326300] sky2 eth0: addr 00:13:77:b4:1b:fa [ 25.346971] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 25.347606] usbcore: registered new interface driver btusb [ 25.392553] Linux video capture interface: v2.00 [ 25.520877] uvcvideo: Found UVC 1.00 device (174f:5932) [ 25.521801] input: UVC Camera (174f:5932) as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7 [ 25.521949] usbcore: registered new interface driver uvcvideo [ 25.521952] USB Video Class driver (v0.1.0) [ 25.931161] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 26.028688] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 26.065895] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 [ 26.182907] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33.1-gcc-ks [ 26.182911] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 26.183050] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 26.183087] iwlagn 0000:02:00.0: setting latency timer to 64 [ 26.183202] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 26.205627] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 26.205720] alloc irq_desc for 30 on node -1 [ 26.205723] alloc kstat_irqs on node -1 [ 26.205767] iwlagn 0000:02:00.0: irq 30 for MSI/MSI-X [ 26.296058] Error: Driver 'pcspkr' is already registered, aborting... [ 26.314578] alloc irq_desc for 22 on node -1 [ 26.314582] alloc kstat_irqs on node -1 [ 26.314592] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 26.314664] alloc irq_desc for 31 on node -1 [ 26.314666] alloc kstat_irqs on node -1 [ 26.314681] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X [ 26.314720] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 26.670519] hda_codec: ALC262: BIOS auto-probing. [ 26.671365] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 26.672368] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 28.996599] Adding 4194296k swap on /dev/mapper/internalhd-swap. Priority:-1 extents:1 across:4194296k [ 35.116339] Bluetooth: L2CAP ver 2.14 [ 35.116343] Bluetooth: L2CAP socket layer initialized [ 35.218190] Bluetooth: RFCOMM TTY layer initialized [ 35.218195] Bluetooth: RFCOMM socket layer initialized [ 35.218198] Bluetooth: RFCOMM ver 1.11 [ 35.381336] Bluetooth: SCO (Voice Link) ver 0.6 [ 35.381340] Bluetooth: SCO socket layer initialized [ 35.456151] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.456155] Bluetooth: BNEP filters: protocol multicast [ 35.640620] Bridge firewalling registered [ 36.338047] [drm:drm_crtc_helper_set_config], [ 36.338053] [drm:drm_crtc_helper_set_config], crtc: ffff88013e370800 3 fb: ffff88013d816840 connectors: ffff88013fc15160 num_connectors: 1 (x, y) (0, 0) [ 36.338081] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 36.338088] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 36.338095] [drm:drm_crtc_helper_set_config], [ 36.338099] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013d816840 connectors: ffff88013fc15180 num_connectors: 1 (x, y) (0, 0) [ 36.338116] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 36.338122] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 42.107784] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 42.189591] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12 [ 42.344077] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 42.360074] sky2 eth0: enabling interface [ 42.360891] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.438861] ata1.00: configured for UDMA/100 [ 45.438870] ata1: EH complete [ 140.004969] [drm:drm_crtc_helper_set_config], [ 140.004972] [drm:drm_crtc_helper_set_config], crtc: ffff88013e370800 3 fb: ffff88013d816840 connectors: ffff88013fc15160 num_connectors: 1 (x, y) (0, 0) [ 140.004989] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 140.004992] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 140.004996] [drm:drm_crtc_helper_set_config], [ 140.004998] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013d816840 connectors: ffff88013fc15180 num_connectors: 1 (x, y) (0, 0) [ 140.005006] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 140.005009] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 140.648184] [drm:drm_crtc_helper_set_config], [ 140.648189] [drm:drm_crtc_helper_set_config], crtc: ffff88013e370800 3 fb: ffff88013d816840 connectors: ffff88013fc15160 num_connectors: 1 (x, y) (0, 0) [ 140.648209] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 140.648214] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 140.648218] [drm:drm_crtc_helper_set_config], [ 140.648221] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013d816840 connectors: ffff88013fc15180 num_connectors: 1 (x, y) (0, 0) [ 140.648232] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 140.648236] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 140.648461] [drm:drm_mode_getresources], Counted 2 8 8 [ 140.648467] [drm:drm_mode_getresources], Counted 2 8 8 [ 140.648540] [drm:drm_mode_getconnector], connector id 5: [ 140.648544] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 140.655505] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 140.655514] [drm:drm_mode_getconnector], connector id 5: [ 140.655519] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 140.663492] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 140.663547] [drm:drm_mode_getconnector], connector id 7: [ 140.663553] [drm:drm_helper_probe_single_connector_modes], LVDS-1 [ 140.766050] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1 [ 140.766055] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 140.766065] [drm:drm_mode_getconnector], connector id 7: [ 140.766204] [drm:drm_mode_getconnector], connector id 13: [ 140.766209] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 140.770777] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 140.770816] [drm:drm_mode_getconnector], connector id 13: [ 140.770820] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 140.775311] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 140.775335] [drm:drm_mode_getconnector], connector id 15: [ 140.775339] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 140.775343] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 140.775347] [drm:drm_mode_getconnector], connector id 15: [ 140.775351] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 140.775355] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 140.775375] [drm:drm_mode_getconnector], connector id 17: [ 140.775379] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 140.803567] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 140.803571] [drm:drm_mode_getconnector], connector id 17: [ 140.803575] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 140.831757] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 140.831776] [drm:drm_mode_getconnector], connector id 19: [ 140.831780] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 140.831784] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 140.831789] [drm:drm_mode_getconnector], connector id 19: [ 140.831792] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 140.831796] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 140.831812] [drm:drm_mode_getconnector], connector id 21: [ 140.831815] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 140.834333] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 140.834337] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 140.834341] [drm:drm_mode_getconnector], connector id 21: [ 140.834344] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 140.836866] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 140.836870] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 140.836891] [drm:drm_mode_getconnector], connector id 23: [ 140.836895] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 140.878507] [drm:intel_tv_detect_type], No TV connection detected [ 140.878513] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected [ 140.878517] [drm:drm_mode_debug_printmodeline], Modeline 41:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 140.878525] [drm:drm_mode_prune_invalid], Not using 848x480 mode -3 [ 140.878530] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0 [ 140.878538] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3 [ 140.878542] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [ 140.878550] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3 [ 140.878554] [drm:drm_mode_debug_printmodeline], Modeline 39:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0 [ 140.878562] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3 [ 140.878569] [drm:drm_mode_getconnector], connector id 23: [ 140.878573] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 140.920506] [drm:intel_tv_detect_type], No TV connection detected [ 140.920511] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected [ 140.920555] [drm:drm_mode_getconnector], connector id 5: [ 140.920560] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 140.928479] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 140.928486] [drm:drm_mode_getconnector], connector id 5: [ 140.928491] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 140.936505] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 140.936524] [drm:drm_mode_getconnector], connector id 7: [ 140.936529] [drm:drm_helper_probe_single_connector_modes], LVDS-1 [ 141.038973] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1 [ 141.038977] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 141.038985] [drm:drm_mode_getconnector], connector id 7: [ 141.060158] [drm:drm_mode_getconnector], connector id 13: [ 141.060164] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 141.064654] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 141.064659] [drm:drm_mode_getconnector], connector id 13: [ 141.064662] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 141.069142] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 141.069149] [drm:drm_mode_getconnector], connector id 15: [ 141.069153] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 141.069158] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 141.069162] [drm:drm_mode_getconnector], connector id 15: [ 141.069166] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 141.069170] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 141.069176] [drm:drm_mode_getconnector], connector id 17: [ 141.069180] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 141.097372] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 141.097377] [drm:drm_mode_getconnector], connector id 17: [ 141.097380] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 141.125556] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 141.125562] [drm:drm_mode_getconnector], connector id 19: [ 141.125566] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 141.125570] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 141.125574] [drm:drm_mode_getconnector], connector id 19: [ 141.125577] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 141.125581] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 141.125586] [drm:drm_mode_getconnector], connector id 21: [ 141.125589] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 141.128105] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 141.128109] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 141.128114] [drm:drm_mode_getconnector], connector id 21: [ 141.128118] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 141.130634] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 141.130638] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 141.130644] [drm:drm_mode_getconnector], connector id 23: [ 141.130647] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 141.172505] [drm:intel_tv_detect_type], No TV connection detected [ 141.172511] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected [ 141.172518] [drm:drm_mode_getconnector], connector id 23: [ 141.172522] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 141.214478] [drm:intel_tv_detect_type], No TV connection detected [ 141.214483] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 is disconnected [ 141.281026] [drm:drm_crtc_helper_set_config], [ 141.281031] [drm:drm_crtc_helper_set_config], crtc: ffff88013e371800 4 fb: ffff88013b913900 connectors: ffff88013ac46988 num_connectors: 1 (x, y) (0, 0) [ 141.281051] [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff88013e371800 [ 141.281055] [drm:drm_crtc_helper_set_config], setting connector 23 crtc to ffff88013e370800 [ 141.286601] [drm:intel_pipe_set_base], Writing base 02418000 00000000 0 0 [ 141.286609] [drm:g4x_enable_fbc], enabled fbc on plane 1 [ 141.307612] [drm:intel_update_watermarks], plane A (pipe 0) clock: 14513 [ 141.307623] [drm:intel_update_watermarks], plane B (pipe 1) clock: 65800 [ 142.280621] [drm:intel_crtc_cursor_set], [ 157.773575] [drm:drm_mode_getconnector], connector id 5: [ 157.773583] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 157.781051] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 157.781058] [drm:drm_mode_getconnector], connector id 5: [ 157.781062] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 157.789053] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 157.789073] [drm:drm_mode_getconnector], connector id 7: [ 157.789078] [drm:drm_helper_probe_single_connector_modes], LVDS-1 [ 157.891506] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1 [ 157.891510] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 157.891525] [drm:drm_mode_getconnector], connector id 7: [ 157.891729] [drm:drm_mode_getconnector], connector id 13: [ 157.891734] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 157.896225] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 157.896234] [drm:drm_mode_getconnector], connector id 13: [ 157.896238] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 157.900719] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 157.900726] [drm:drm_mode_getconnector], connector id 15: [ 157.900730] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 157.900735] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 157.900739] [drm:drm_mode_getconnector], connector id 15: [ 157.900742] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 157.900746] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 157.900751] [drm:drm_mode_getconnector], connector id 17: [ 157.900755] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 157.928271] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 157.928280] [drm:drm_mode_getconnector], connector id 17: [ 157.928284] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 157.955873] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 157.955884] [drm:drm_mode_getconnector], connector id 19: [ 157.955888] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 157.955892] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 157.955896] [drm:drm_mode_getconnector], connector id 19: [ 157.955899] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 157.955903] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 157.955908] [drm:drm_mode_getconnector], connector id 21: [ 157.955912] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 157.958434] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 157.958439] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 157.958444] [drm:drm_mode_getconnector], connector id 21: [ 157.958448] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 157.960971] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 157.960975] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 157.960981] [drm:drm_mode_getconnector], connector id 23: [ 157.960985] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 158.002109] [drm:intel_tv_detect_type], Detected S-Video TV connection [ 158.002123] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1 [ 158.002127] [drm:drm_mode_debug_printmodeline], Modeline 46:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 158.002135] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0 [ 158.002142] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [ 158.002150] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0 [ 158.002168] [drm:drm_mode_getconnector], connector id 23: [ 158.035973] [drm:drm_mode_getconnector], connector id 5: [ 158.035981] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 158.043138] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 158.043148] [drm:drm_mode_getconnector], connector id 5: [ 158.043153] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 158.051136] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 158.051154] [drm:drm_mode_getconnector], connector id 7: [ 158.051159] [drm:drm_helper_probe_single_connector_modes], LVDS-1 [ 158.153850] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1 [ 158.153854] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 158.153870] [drm:drm_mode_getconnector], connector id 7: [ 158.154078] [drm:drm_mode_getconnector], connector id 13: [ 158.154083] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 158.158834] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 158.158844] [drm:drm_mode_getconnector], connector id 13: [ 158.158848] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 158.163511] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 158.163520] [drm:drm_mode_getconnector], connector id 15: [ 158.163524] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 158.163528] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 158.163533] [drm:drm_mode_getconnector], connector id 15: [ 158.163536] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 158.163540] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 158.163545] [drm:drm_mode_getconnector], connector id 17: [ 158.163549] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 158.191064] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 158.191076] [drm:drm_mode_getconnector], connector id 17: [ 158.191080] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 158.218558] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 158.218570] [drm:drm_mode_getconnector], connector id 19: [ 158.218574] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 158.218579] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 158.218583] [drm:drm_mode_getconnector], connector id 19: [ 158.218586] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 158.218590] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 158.218595] [drm:drm_mode_getconnector], connector id 21: [ 158.218599] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 158.221123] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 158.221128] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 158.221654] [drm:drm_mode_getconnector], connector id 21: [ 158.221658] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 158.224173] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 158.224178] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 158.224403] [drm:drm_mode_getconnector], connector id 23: [ 158.224408] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 158.266113] [drm:intel_tv_detect_type], Detected S-Video TV connection [ 158.266128] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1 [ 158.266132] [drm:drm_mode_debug_printmodeline], Modeline 46:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 158.266140] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0 [ 158.266148] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [ 158.266155] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0 [ 158.266174] [drm:drm_mode_getconnector], connector id 23: [ 158.563324] [drm:drm_mode_getconnector], connector id 5: [ 158.563333] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 158.571119] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 158.571129] [drm:drm_mode_getconnector], connector id 5: [ 158.571134] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 158.579146] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 158.579165] [drm:drm_mode_getconnector], connector id 7: [ 158.579171] [drm:drm_helper_probe_single_connector_modes], LVDS-1 [ 158.681845] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1 [ 158.681849] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 158.681865] [drm:drm_mode_getconnector], connector id 7: [ 158.682088] [drm:drm_mode_getconnector], connector id 13: [ 158.682093] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 158.686573] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 158.686583] [drm:drm_mode_getconnector], connector id 13: [ 158.686586] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 158.691081] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 158.691090] [drm:drm_mode_getconnector], connector id 15: [ 158.691094] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 158.691099] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 158.691104] [drm:drm_mode_getconnector], connector id 15: [ 158.691108] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 158.691112] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 158.691118] [drm:drm_mode_getconnector], connector id 17: [ 158.691122] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 158.718487] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 158.718495] [drm:drm_mode_getconnector], connector id 17: [ 158.718499] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 158.745999] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 158.746021] [drm:drm_mode_getconnector], connector id 19: [ 158.746026] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 158.746032] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 158.746037] [drm:drm_mode_getconnector], connector id 19: [ 158.746041] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 158.746045] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 158.746051] [drm:drm_mode_getconnector], connector id 21: [ 158.746055] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 158.748571] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 158.748575] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 158.748580] [drm:drm_mode_getconnector], connector id 21: [ 158.748583] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 158.751098] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 158.751102] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 158.751110] [drm:drm_mode_getconnector], connector id 23: [ 158.751114] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 158.792148] [drm:intel_tv_detect_type], Detected S-Video TV connection [ 158.792162] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1 [ 158.792167] [drm:drm_mode_debug_printmodeline], Modeline 46:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 158.792174] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0 [ 158.792182] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [ 158.792189] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0 [ 158.792207] [drm:drm_mode_getconnector], connector id 23: [ 182.292091] [drm:intel_crtc_cursor_set], [ 182.292097] [drm:intel_crtc_cursor_set], cursor off [ 183.404270] [drm:drm_mode_getconnector], connector id 5: [ 183.404278] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 183.411053] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 183.411061] [drm:drm_mode_getconnector], connector id 5: [ 183.411065] [drm:drm_helper_probe_single_connector_modes], VGA-1 [ 183.420037] [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [ 183.420053] [drm:drm_mode_getconnector], connector id 7: [ 183.420058] [drm:drm_helper_probe_single_connector_modes], LVDS-1 [ 183.522569] [drm:drm_helper_probe_single_connector_modes], Probed modes for LVDS-1 [ 183.522574] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x800" 60 65800 1280 1292 1322 1354 800 803 806 810 0x48 0xa [ 183.522630] [drm:drm_mode_getconnector], connector id 7: [ 183.522891] [drm:drm_mode_getconnector], connector id 13: [ 183.522896] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 183.527714] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 183.527725] [drm:drm_mode_getconnector], connector id 13: [ 183.527728] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [ 183.534747] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [ 183.534767] [drm:drm_mode_getconnector], connector id 15: [ 183.534771] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 183.534776] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 183.534780] [drm:drm_mode_getconnector], connector id 15: [ 183.534783] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [ 183.534787] [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 is disconnected [ 183.534795] [drm:drm_mode_getconnector], connector id 17: [ 183.534799] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 183.566267] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 183.566284] [drm:drm_mode_getconnector], connector id 17: [ 183.566289] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [ 183.592466] [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [ 183.592486] [drm:drm_mode_getconnector], connector id 19: [ 183.592490] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 183.592495] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 183.592499] [drm:drm_mode_getconnector], connector id 19: [ 183.592503] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [ 183.592507] [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [ 183.592512] [drm:drm_mode_getconnector], connector id 21: [ 183.592516] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 183.595035] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 183.595040] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 183.595046] [drm:drm_mode_getconnector], connector id 21: [ 183.595049] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [ 183.597570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 183.597573] [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [ 183.597654] [drm:drm_mode_getconnector], connector id 23: [ 183.597658] [drm:drm_helper_probe_single_connector_modes], SVIDEO-1 [ 183.639063] [drm:intel_tv_detect_type], Detected S-Video TV connection [ 183.639079] [drm:drm_helper_probe_single_connector_modes], Probed modes for SVIDEO-1 [ 183.639083] [drm:drm_mode_debug_printmodeline], Modeline 46:"848x480" 30 14513 848 849 912 944 480 481 512 513 0x48 0x0 [ 183.639090] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 30 11315 640 641 704 736 480 481 512 513 0x48 0x0 [ 183.639096] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 30 26886 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [ 183.639103] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 30 16998 800 801 864 896 600 601 632 633 0x40 0x0 [ 183.639128] [drm:drm_mode_getconnector], connector id 23: