[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Linux version 2.6.32.11-vanilla1 (root@aerith) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 Tue Apr 6 16:02:28 PDT 2010 [ 0.000000] Found initrd at 0xc1a00000:0xc1e8f000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: PowerBook G4 15" [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x00000000b0000000..0x00000000bfffffff -> 0x00000000b0000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x00000000afffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=512, gen1=511 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal 0x00030000 -> 0x00030000 [ 0.000000] HighMem 0x00030000 -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c046634c, node_mem_map c04e6000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 512 pages used for memmap [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/hda3 ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 262144k [ 0.000000] Memory: 1026768k/1048576k available (4328k kernel code, 21064k reserved, 220k data, 415k bss, 192k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffef000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfde27000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfde27000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 18.432000 MHz [ 0.000000] time_init: processor frequency = 1499.999994 MHz [ 0.000000] clocksource: timebase mult[d9038e4] shift[22] registered [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.001129] Security Framework initialized [ 0.001158] SELinux: Disabled at boot. [ 0.001178] Mount-cache hash table entries: 512 [ 0.001602] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.005115] devtmpfs: initialized [ 0.005528] NET: Registered protocol family 16 [ 0.006181] MPC7450 family performance monitor hardware support registered [ 0.006241] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.006288] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.006305] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 [ 0.006319] channel 0 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@0 [ 0.006357] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.006379] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.006395] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 [ 0.006419] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.006432] channel 1 bus [ 0.006441] channel 2 bus [ 0.006531] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.006563] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.006708] PCI: Probing PCI hardware [ 0.006888] pci 0000:00:10.0: reg 10 32bit mmio pref: [0xb8000000-0xbfffffff] [ 0.006900] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff] [ 0.006910] pci 0000:00:10.0: reg 18 32bit mmio: [0xb0000000-0xb000ffff] [ 0.006929] pci 0000:00:10.0: reg 30 32bit mmio pref: [0xb0020000-0xb003ffff] [ 0.006956] pci 0000:00:10.0: supports D1 D2 [ 0.007015] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.007315] pci 0001:10:12.0: reg 10 32bit mmio: [0xa0006000-0xa0007fff] [ 0.007360] pci 0001:10:12.0: supports D1 D2 [ 0.007366] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007384] pci 0001:10:12.0: PME# disabled [ 0.007428] pci 0001:10:13.0: reg 10 32bit mmio: [0xa0004000-0xa0004fff] [ 0.007452] pci 0001:10:13.0: supports D1 D2 [ 0.007458] pci 0001:10:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007473] pci 0001:10:13.0: PME# disabled [ 0.007510] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff] [ 0.007566] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.007631] pci 0001:10:1a.0: reg 10 32bit mmio: [0xa0003000-0xa0003fff] [ 0.007697] pci 0001:10:1b.0: reg 10 32bit mmio: [0xa0002000-0xa0002fff] [ 0.007741] pci 0001:10:1b.0: supports D1 D2 [ 0.007746] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007762] pci 0001:10:1b.0: PME# disabled [ 0.007805] pci 0001:10:1b.1: reg 10 32bit mmio: [0xa0001000-0xa0001fff] [ 0.007848] pci 0001:10:1b.1: supports D1 D2 [ 0.007854] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007877] pci 0001:10:1b.1: PME# disabled [ 0.007924] pci 0001:10:1b.2: reg 10 32bit mmio: [0xa0000000-0xa00000ff] [ 0.007968] pci 0001:10:1b.2: supports D1 D2 [ 0.007973] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007992] pci 0001:10:1b.2: PME# disabled [ 0.008057] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52 [ 0.008085] irq: irq 53 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 53 [ 0.008123] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.008155] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.008186] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63 [ 0.008854] pci 0002:24:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff] [ 0.008908] pci 0002:24:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff] [ 0.008945] pci 0002:24:0e.0: supports D1 D2 [ 0.008951] pci 0002:24:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.008970] pci 0002:24:0e.0: PME# disabled [ 0.009004] pci 0002:24:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff] [ 0.009028] pci 0002:24:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff] [ 0.009090] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.009117] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.009147] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.009491] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff] [ 0.009519] pci 0001:10:13.0: CardBus bridge, secondary bus 0001:11 [ 0.009539] pci 0001:10:13.0: IO window: 0x001000-0x0010ff [ 0.009557] pci 0001:10:13.0: IO window: 0x001100-0x0011ff [ 0.009576] pci 0001:10:13.0: PREFETCH window: 0x84000000-0x87ffffff [ 0.009595] pci 0001:10:13.0: MEM window: 0x88000000-0x8bffffff [ 0.009632] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff] [ 0.009639] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff] [ 0.009647] pci_bus 0000:00: resource 2 mem: [0xb0000000-0xbfffffff] [ 0.009654] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff] [ 0.009661] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff] [ 0.009668] pci_bus 0001:10: resource 2 mem: [0x80000000-0xafffffff] [ 0.009676] pci_bus 0001:11: resource 0 io: [0x1000-0x10ff] [ 0.009683] pci_bus 0001:11: resource 1 io: [0x1100-0x11ff] [ 0.009690] pci_bus 0001:11: resource 2 pref mem [0x84000000-0x87ffffff] [ 0.009697] pci_bus 0001:11: resource 3 mem: [0x88000000-0x8bffffff] [ 0.009705] pci_bus 0002:24: resource 0 io: [0xff7fe000-0xffffdfff] [ 0.009712] pci_bus 0002:24: resource 1 mem: [0xf5000000-0xf5ffffff] [ 0.010947] bio: create slab at 0 [ 0.011205] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.011250] vgaarb: loaded [ 0.011471] usbcore: registered new interface driver usbfs [ 0.011524] usbcore: registered new interface driver hub [ 0.011597] usbcore: registered new device driver usb [ 0.011951] NET: Registered protocol family 8 [ 0.011970] NET: Registered protocol family 20 [ 0.012012] Switching to clocksource timebase [ 0.012455] NET: Registered protocol family 2 [ 0.012536] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.012973] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.015184] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.015786] TCP: Hash tables configured (established 131072 bind 65536) [ 0.015812] TCP reno registered [ 0.016016] NET: Registered protocol family 1 [ 0.016249] Trying to unpack rootfs image as initramfs... [ 0.265907] Freeing initrd memory: 4668k freed [ 0.266737] Registering PowerMac CPU frequency driver [ 0.266758] Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz [ 0.272311] audit: initializing netlink socket (disabled) [ 0.272345] type=2000 audit(1270599375.270:1): initialized [ 0.272561] highmem bounce pool size: 64 pages [ 0.274579] VFS: Disk quotas dquot_6.5.2 [ 0.274671] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.274747] fuse init (API version 7.13) [ 0.274893] msgmni has been set to 1503 [ 0.275200] alg: No test for stdrng (krng) [ 0.275223] io scheduler noop registered [ 0.275294] io scheduler cfq registered (default) [ 0.275480] radeonfb 0000:00:10.0: enabling device (0006 -> 0007) [ 0.471037] radeonfb 0000:00:10.0: Invalid ROM contents [ 0.471052] radeonfb (0000:00:10.0): Invalid ROM signature 303 should be 0xaa55 [ 0.471059] radeonfb: Retrieved PLL infos from Open Firmware [ 0.471069] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=203.00 Mhz, System=392.00 MHz [ 0.471081] radeonfb: PLL min 12000 max 35000 [ 0.559790] i2c i2c-2: unable to read EDID block. [ 0.703118] i2c i2c-2: unable to read EDID block. [ 0.846451] i2c i2c-2: unable to read EDID block. [ 1.149687] radeonfb: Monitor 1 type LCD found [ 1.149694] radeonfb: EDID probed [ 1.149701] radeonfb: Monitor 2 type no found [ 1.149715] radeonfb: Using Firmware dividers 0x0002008e from PPLL 0 [ 1.149775] radeonfb: Dynamic Clock Power Management enabled [ 1.179945] Console: switching to colour frame buffer device 160x53 [ 1.201340] radeonfb: Backlight initialized (radeonbl0) [ 1.201508] radeonfb (0000:00:10.0): ATI Radeon 4e50 "NP" [ 1.203777] Generic non-volatile memory driver v1.1 [ 1.205343] brd: module loaded [ 1.205542] MacIO PCI driver attached to Intrepid chipset [ 1.205962] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 1.206116] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 1.206127] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 1.206174] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 1.206184] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 1.206193] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 1.206259] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 1.206269] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 1.206278] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 1.206501] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.206954] Uniform Multi-Platform E-IDE driver [ 1.207241] ide-pmac 0002:24:0d.0: enabling device (0000 -> 0002) [ 1.207528] adb: starting probe task... [ 1.207662] adb: finished probe task... [ 2.222037] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 2.222295] Probing IDE interface ide0... [ 2.495552] hda: TOSHIBA MK8026GAX, ATA DISK drive [ 3.135416] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.135463] hda: UDMA/100 mode selected [ 3.135648] ide0 at 0xf1032000-0xf1032070,0xf1032160 on irq 39 [ 4.152035] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24 [ 4.152291] Probing IDE interface ide1... [ 4.532217] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive [ 4.852072] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.852239] hdc: MWDMA2 mode selected [ 4.852568] ide1 at 0xf1024000-0xf1024070,0xf1024160 on irq 24 [ 4.852866] Fixed MDIO Bus: probed [ 4.853088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.853327] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) [ 4.853531] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 4.853771] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 4.875395] ehci_hcd 0001:10:1b.2: irq 63, io mem 0xa0000000 [ 4.885373] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 4.885737] usb usb1: configuration #1 chosen from 1 choice [ 4.885963] hub 1-0:1.0: USB hub found [ 4.886102] hub 1-0:1.0: 5 ports detected [ 4.893360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.900602] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 4.907830] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) [ 4.915083] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 4.922356] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 4.929624] ohci_hcd 0001:10:1a.0: irq 29, io mem 0xa0003000 [ 5.008380] usb usb2: configuration #1 chosen from 1 choice [ 5.015658] hub 2-0:1.0: USB hub found [ 5.022890] hub 2-0:1.0: 2 ports detected [ 5.030173] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) [ 5.037531] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 5.044848] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 5.052219] ohci_hcd 0001:10:1b.0: irq 63, io mem 0xa0002000 [ 5.131704] usb usb3: configuration #1 chosen from 1 choice [ 5.139073] hub 3-0:1.0: USB hub found [ 5.146284] hub 3-0:1.0: 3 ports detected [ 5.153508] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) [ 5.160756] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 5.168102] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 5.175586] ohci_hcd 0001:10:1b.1: irq 63, io mem 0xa0001000 [ 5.264793] usb usb4: configuration #1 chosen from 1 choice [ 5.272343] hub 4-0:1.0: USB hub found [ 5.279874] hub 4-0:1.0: 2 ports detected [ 5.287460] usbcore: registered new interface driver libusual [ 5.295069] mice: PS/2 mouse device common for all mice [ 5.302612] PowerMac i2c bus pmu 2 registered [ 5.310105] PowerMac i2c bus pmu 1 registered [ 5.317489] PowerMac i2c bus mac-io 0 registered [ 5.324811] PowerMac i2c bus uni-n 0 registered [ 5.332088] PowerMac i2c bus uni-n 1 registered [ 5.339388] TCP cubic registered [ 5.346489] registered taskstats version 1 [ 5.353761] input: PMU as /devices/virtual/input/input1 [ 5.360712] Registered led device: pmu-led::front [ 5.367677] drivers/rtc/hctosys.c: unable to open rtc device (y) [ 5.374624] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 5.381568] Freeing unused kernel memory: 192k init [ 5.448865] udev: starting version 151 [ 5.572945] usb 2-1: configuration #1 chosen from 1 choice [ 5.745622] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 5.791213] ide-gd driver 1.18 [ 5.820440] hda: max request size: 512KiB [ 5.827692] ide-cd driver 5.00 [ 5.855765] PHY ID: 1410cc2, addr: 0 [ 5.856473] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:08:ac:8c [ 5.856478] eth0: Found Marvell 88E1111 PHY [ 5.856564] ohci1394 0002:24:0e.0: enabling device (0000 -> 0002) [ 5.885435] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 5.898834] hda: 156301488 sectors (80026 MB), CHS=16383/255/63 [ 5.898903] hda: cache flushes supported [ 5.899032] hda: [ 5.916508] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[4096] IR/IT contexts=[8/8] [ 5.940837] [mac] hda1 hda2 hda3 hda4 [ 5.950562] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 5.958192] Uniform CD-ROM driver Revision: 3.20 [ 6.130925] usb 2-2: configuration #1 chosen from 1 choice [ 6.194406] usbcore: registered new interface driver hiddev [ 6.229783] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input2 [ 6.237748] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 [ 6.266555] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input3 [ 6.275227] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 [ 6.284404] usbcore: registered new interface driver usbhid [ 6.293237] usbhid: v2.6:USB HID core driver [ 6.323400] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input4 [ 6.345748] apple 0003:05AC:020E.0003: input,hidraw2: USB HID v1.10 Keyboard [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input0 [ 6.359902] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.2/input/input5 [ 6.376840] apple 0003:05AC:020E.0004: input,hidraw3: USB HID v1.10 Device [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input2 [ 6.482018] kjournald starting. Commit interval 5 seconds [ 6.491888] EXT3-fs: mounted filesystem with writeback data mode. [ 7.245556] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001451fffe08ac8c] [ 31.055536] eth0: Link is up at 100 Mbps, full-duplex. [ 35.518165] Adding 3023748k swap on /dev/hda4. Priority:-1 extents:1 across:3023748k [ 35.575737] udev: starting version 151 [ 36.019294] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) [ 36.071781] usb 2-1: USB disconnect, address 2 [ 36.074579] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108 [ 36.081080] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 36.152098] Linux agpgart interface v0.103 [ 36.155956] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 36.223438] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input6 [ 36.223571] usbcore: registered new interface driver appletouch [ 36.447812] EXT3 FS on hda3, internal journal [ 36.513771] usb 2-1: new full speed USB device using ohci_hcd and address 4 [ 36.514140] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 36.516261] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 36.524791] ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 36.525905] ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 36.547600] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 36.548791] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 36.856769] cfg80211: Calling CRDA to update world regulatory domain [ 36.860532] yenta_cardbus 0001:10:13.0: CardBus bridge found [0000:0000] [ 36.860556] yenta_cardbus 0001:10:13.0: Enabling burst memory read transactions [ 36.860562] yenta_cardbus 0001:10:13.0: Using CSCINT to route CSC interrupts to PCI [ 36.860566] yenta_cardbus 0001:10:13.0: Routing CardBus interrupts to PCI [ 36.860572] yenta_cardbus 0001:10:13.0: TI: mfunc 0x00001002, devctl 0x60 [ 36.896996] usb 2-1: configuration #1 chosen from 1 choice [ 36.902945] irq: irq 57 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 57 [ 36.902988] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58 [ 36.910604] ams: Found I2C based motion sensor [ 36.950882] cfg80211: World regulatory domain updated: [ 36.950894] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.950899] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.950903] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 36.950907] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 36.950911] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.950914] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.962218] yenta_cardbus 0001:10:13.0: ISA IRQ mask 0x0000, PCI irq 53 [ 36.962226] yenta_cardbus 0001:10:13.0: Socket status: 30000007 [ 36.962239] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff [ 36.962246] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff [ 36.962251] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xafffffff [ 37.140363] Bluetooth: Core ver 2.15 [ 37.155216] NET: Registered protocol family 31 [ 37.155223] Bluetooth: HCI device and connection manager initialized [ 37.155228] Bluetooth: HCI socket layer initialized [ 37.241431] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 37.246910] usbcore: registered new interface driver btusb [ 37.287948] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 37.562760] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 37.562796] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 37.562812] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 37.611163] snd-aoa-fabric-layout: Using PMF GPIOs [ 37.625889] phy0: Selected rate control algorithm 'minstrel' [ 37.626190] Registered led device: b43-phy0::tx [ 37.626219] Registered led device: b43-phy0::rx [ 37.626244] Registered led device: b43-phy0::radio [ 37.626376] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 37.669453] snd-aoa-codec-tas: found tas3004 [ 37.670302] snd-aoa-fabric-layout: can use this codec [ 37.716887] apm_emu: PMU APM Emulation initialized. [ 37.729167] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 37.729209] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a [ 38.017799] SCSI subsystem initialized [ 38.404376] NET: Registered protocol family 10 [ 38.412095] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 38.480501] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 38.487740] adt746x: version 1 (supported) [ 38.487750] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 [ 38.487755] sensor 0: CPU/INTREPID BOTTOMSIDE [ 38.487758] sensor 1: CPU BOTTOMSIDE [ 38.487761] sensor 2: PWR SUPPLY BOTTOMSIDE [ 38.491625] adt746x: ADT7467 initializing [ 38.504100] adt746x: Lowering max temperatures from 81, 80, 87 to 70, 50, 70 [ 38.510827] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 38.531993] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 38.751819] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 38.819983] lo: Disabled Privacy Extensions [ 38.820144] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 38.863570] eth0: Link is up at 100 Mbps, full-duplex. [ 38.863579] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) [ 39.110428] NET: Registered protocol family 17 [ 39.460115] radeonfb 0000:00:10.0: Invalid ROM contents [ 39.460226] radeonfb 0000:00:10.0: Invalid ROM contents [ 39.581775] hda: host max PIO4 wanted PIO0 selected PIO0 [ 39.620355] [drm] Initialized drm 1.1.0 20060810 [ 39.839805] [drm] Initialized radeon 1.31.0 20080528 for 0000:00:10.0 on minor 0 [ 40.413388] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode [ 40.413400] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode [ 41.053580] [drm] Setting GART location based on new memory map [ 41.053690] [drm] Loading R300 Microcode [ 41.054441] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 41.111792] [drm] Num pipes: 1 [ 41.111808] [drm] writeback test succeeded in 1 usecs [ 41.503985] Bluetooth: L2CAP ver 2.14 [ 41.503994] Bluetooth: L2CAP socket layer initialized [ 41.549721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 41.549731] Bluetooth: BNEP filters: protocol multicast [ 41.613872] Bluetooth: SCO (Voice Link) ver 0.6 [ 41.613882] Bluetooth: SCO socket layer initialized [ 136.688951] wlan0: deauthenticating from 00:1f:ca:5c:88:c0 by local choice (reason=3) [ 136.692380] wlan0: direct probe to AP 00:1f:ca:5c:88:c0 (try 1) [ 136.892083] wlan0: direct probe to AP 00:1f:ca:5c:88:c0 (try 2) [ 136.893628] wlan0: direct probe responded [ 136.893639] wlan0: authenticate with AP 00:1f:ca:5c:88:c0 (try 1) [ 136.908626] wlan0: authenticated [ 136.908723] wlan0: associate with AP 00:1f:ca:5c:88:c0 (try 1) [ 136.919220] wlan0: RX AssocResp from 00:1f:ca:5c:88:c0 (capab=0x421 status=0 aid=5) [ 136.919230] wlan0: associated [ 136.920316] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 136.920446] cfg80211: Calling CRDA for country: US [ 136.949301] cfg80211: Current regulatory domain updated by AP to: US [ 136.949311] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 136.949315] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 147.715363] wlan0: no IPv6 routers present