[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Linux version 2.6.32.11-vanilla1 (root@aerith) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 Tue Apr 6 16:02:28 PDT 2010 [ 0.000000] Found initrd at 0xc1a00000:0xc1e8f000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: PowerBook G4 15" [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x00000000b0000000..0x00000000bfffffff -> 0x00000000b0000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x00000000afffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=512, gen1=511 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal 0x00030000 -> 0x00030000 [ 0.000000] HighMem 0x00030000 -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c046634c, node_mem_map c04e6000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 512 pages used for memmap [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/hda3 ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 262144k [ 0.000000] Memory: 1026768k/1048576k available (4328k kernel code, 21064k reserved, 220k data, 415k bss, 192k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffef000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfde27000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfde27000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 18.432000 MHz [ 0.000000] time_init: processor frequency = 1499.999994 MHz [ 0.000000] clocksource: timebase mult[d9038e4] shift[22] registered [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.001128] Security Framework initialized [ 0.001157] SELinux: Disabled at boot. [ 0.001178] Mount-cache hash table entries: 512 [ 0.001603] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.005118] devtmpfs: initialized [ 0.005523] NET: Registered protocol family 16 [ 0.006178] MPC7450 family performance monitor hardware support registered [ 0.006238] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.006286] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.006303] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 [ 0.006316] channel 0 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@0 [ 0.006355] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.006377] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.006392] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 [ 0.006418] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.006431] channel 1 bus [ 0.006439] channel 2 bus [ 0.006529] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.006561] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.006705] PCI: Probing PCI hardware [ 0.006885] pci 0000:00:10.0: reg 10 32bit mmio pref: [0xb8000000-0xbfffffff] [ 0.006897] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff] [ 0.006907] pci 0000:00:10.0: reg 18 32bit mmio: [0xb0000000-0xb000ffff] [ 0.006926] pci 0000:00:10.0: reg 30 32bit mmio pref: [0xb0020000-0xb003ffff] [ 0.006953] pci 0000:00:10.0: supports D1 D2 [ 0.007012] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.007312] pci 0001:10:12.0: reg 10 32bit mmio: [0xa0006000-0xa0007fff] [ 0.007356] pci 0001:10:12.0: supports D1 D2 [ 0.007363] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007380] pci 0001:10:12.0: PME# disabled [ 0.007425] pci 0001:10:13.0: reg 10 32bit mmio: [0xa0004000-0xa0004fff] [ 0.007449] pci 0001:10:13.0: supports D1 D2 [ 0.007455] pci 0001:10:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007470] pci 0001:10:13.0: PME# disabled [ 0.007507] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff] [ 0.007563] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.007627] pci 0001:10:1a.0: reg 10 32bit mmio: [0xa0003000-0xa0003fff] [ 0.007693] pci 0001:10:1b.0: reg 10 32bit mmio: [0xa0002000-0xa0002fff] [ 0.007737] pci 0001:10:1b.0: supports D1 D2 [ 0.007743] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007758] pci 0001:10:1b.0: PME# disabled [ 0.007801] pci 0001:10:1b.1: reg 10 32bit mmio: [0xa0001000-0xa0001fff] [ 0.007844] pci 0001:10:1b.1: supports D1 D2 [ 0.007850] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007873] pci 0001:10:1b.1: PME# disabled [ 0.007920] pci 0001:10:1b.2: reg 10 32bit mmio: [0xa0000000-0xa00000ff] [ 0.007963] pci 0001:10:1b.2: supports D1 D2 [ 0.007969] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007988] pci 0001:10:1b.2: PME# disabled [ 0.008053] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52 [ 0.008081] irq: irq 53 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 53 [ 0.008120] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.008153] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.008183] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63 [ 0.008853] pci 0002:24:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff] [ 0.008907] pci 0002:24:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff] [ 0.008944] pci 0002:24:0e.0: supports D1 D2 [ 0.008949] pci 0002:24:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.008969] pci 0002:24:0e.0: PME# disabled [ 0.009003] pci 0002:24:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff] [ 0.009027] pci 0002:24:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff] [ 0.009088] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.009116] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.009146] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.009490] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff] [ 0.009518] pci 0001:10:13.0: CardBus bridge, secondary bus 0001:11 [ 0.009538] pci 0001:10:13.0: IO window: 0x001000-0x0010ff [ 0.009556] pci 0001:10:13.0: IO window: 0x001100-0x0011ff [ 0.009575] pci 0001:10:13.0: PREFETCH window: 0x84000000-0x87ffffff [ 0.009594] pci 0001:10:13.0: MEM window: 0x88000000-0x8bffffff [ 0.009631] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff] [ 0.009638] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff] [ 0.009645] pci_bus 0000:00: resource 2 mem: [0xb0000000-0xbfffffff] [ 0.009653] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff] [ 0.009660] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff] [ 0.009667] pci_bus 0001:10: resource 2 mem: [0x80000000-0xafffffff] [ 0.009675] pci_bus 0001:11: resource 0 io: [0x1000-0x10ff] [ 0.009681] pci_bus 0001:11: resource 1 io: [0x1100-0x11ff] [ 0.009688] pci_bus 0001:11: resource 2 pref mem [0x84000000-0x87ffffff] [ 0.009696] pci_bus 0001:11: resource 3 mem: [0x88000000-0x8bffffff] [ 0.009703] pci_bus 0002:24: resource 0 io: [0xff7fe000-0xffffdfff] [ 0.009711] pci_bus 0002:24: resource 1 mem: [0xf5000000-0xf5ffffff] [ 0.010945] bio: create slab at 0 [ 0.011202] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.011248] vgaarb: loaded [ 0.011468] usbcore: registered new interface driver usbfs [ 0.011522] usbcore: registered new interface driver hub [ 0.011596] usbcore: registered new device driver usb [ 0.011952] NET: Registered protocol family 8 [ 0.011970] NET: Registered protocol family 20 [ 0.012014] Switching to clocksource timebase [ 0.012459] NET: Registered protocol family 2 [ 0.012540] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.012980] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.015189] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.015791] TCP: Hash tables configured (established 131072 bind 65536) [ 0.015817] TCP reno registered [ 0.016022] NET: Registered protocol family 1 [ 0.016254] Trying to unpack rootfs image as initramfs... [ 0.265875] Freeing initrd memory: 4668k freed [ 0.266705] Registering PowerMac CPU frequency driver [ 0.266726] Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz [ 0.272312] audit: initializing netlink socket (disabled) [ 0.272345] type=2000 audit(1270599035.270:1): initialized [ 0.272561] highmem bounce pool size: 64 pages [ 0.274578] VFS: Disk quotas dquot_6.5.2 [ 0.274669] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.274744] fuse init (API version 7.13) [ 0.274890] msgmni has been set to 1503 [ 0.275192] alg: No test for stdrng (krng) [ 0.275215] io scheduler noop registered [ 0.275286] io scheduler cfq registered (default) [ 0.275475] radeonfb 0000:00:10.0: enabling device (0006 -> 0007) [ 0.471033] radeonfb 0000:00:10.0: Invalid ROM contents [ 0.471048] radeonfb (0000:00:10.0): Invalid ROM signature 303 should be 0xaa55 [ 0.471055] radeonfb: Retrieved PLL infos from Open Firmware [ 0.471065] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=203.00 Mhz, System=392.00 MHz [ 0.471077] radeonfb: PLL min 12000 max 35000 [ 0.559791] i2c i2c-2: unable to read EDID block. [ 0.703119] i2c i2c-2: unable to read EDID block. [ 0.846452] i2c i2c-2: unable to read EDID block. [ 1.149689] radeonfb: Monitor 1 type LCD found [ 1.149696] radeonfb: EDID probed [ 1.149702] radeonfb: Monitor 2 type no found [ 1.149716] radeonfb: Using Firmware dividers 0x0002008e from PPLL 0 [ 1.149776] radeonfb: Dynamic Clock Power Management enabled [ 1.179949] Console: switching to colour frame buffer device 160x53 [ 1.201344] radeonfb: Backlight initialized (radeonbl0) [ 1.201512] radeonfb (0000:00:10.0): ATI Radeon 4e50 "NP" [ 1.203787] Generic non-volatile memory driver v1.1 [ 1.205352] brd: module loaded [ 1.205558] MacIO PCI driver attached to Intrepid chipset [ 1.205976] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 1.206131] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 1.206142] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 1.206189] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 1.206200] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 1.206209] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 1.206275] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 1.206285] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 1.206295] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 1.206518] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.206979] Uniform Multi-Platform E-IDE driver [ 1.207266] ide-pmac 0002:24:0d.0: enabling device (0000 -> 0002) [ 1.207552] adb: starting probe task... [ 1.207684] adb: finished probe task... [ 2.222038] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 2.222296] Probing IDE interface ide0... [ 2.495554] hda: TOSHIBA MK8026GAX, ATA DISK drive [ 3.135417] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.135464] hda: UDMA/100 mode selected [ 3.135650] ide0 at 0xf1032000-0xf1032070,0xf1032160 on irq 39 [ 4.152036] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24 [ 4.152292] Probing IDE interface ide1... [ 4.532218] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive [ 4.852072] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.852237] hdc: MWDMA2 mode selected [ 4.852566] ide1 at 0xf1024000-0xf1024070,0xf1024160 on irq 24 [ 4.852866] Fixed MDIO Bus: probed [ 4.853087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.853326] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) [ 4.853531] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 4.853773] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 4.875396] ehci_hcd 0001:10:1b.2: irq 63, io mem 0xa0000000 [ 4.885374] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 4.885734] usb usb1: configuration #1 chosen from 1 choice [ 4.885961] hub 1-0:1.0: USB hub found [ 4.886101] hub 1-0:1.0: 5 ports detected [ 4.893364] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.900594] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 4.907811] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) [ 4.915052] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 4.922310] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 4.929569] ohci_hcd 0001:10:1a.0: irq 29, io mem 0xa0003000 [ 5.008382] usb usb2: configuration #1 chosen from 1 choice [ 5.015658] hub 2-0:1.0: USB hub found [ 5.022873] hub 2-0:1.0: 2 ports detected [ 5.030150] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) [ 5.037493] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 5.044794] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 5.052156] ohci_hcd 0001:10:1b.0: irq 63, io mem 0xa0002000 [ 5.131704] usb usb3: configuration #1 chosen from 1 choice [ 5.139060] hub 3-0:1.0: USB hub found [ 5.146256] hub 3-0:1.0: 3 ports detected [ 5.153462] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) [ 5.160698] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 5.168030] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 5.175500] ohci_hcd 0001:10:1b.1: irq 63, io mem 0xa0001000 [ 5.264792] usb usb4: configuration #1 chosen from 1 choice [ 5.272321] hub 4-0:1.0: USB hub found [ 5.279839] hub 4-0:1.0: 2 ports detected [ 5.287410] usbcore: registered new interface driver libusual [ 5.295005] mice: PS/2 mouse device common for all mice [ 5.302528] PowerMac i2c bus pmu 2 registered [ 5.310004] PowerMac i2c bus pmu 1 registered [ 5.317374] PowerMac i2c bus mac-io 0 registered [ 5.324680] PowerMac i2c bus uni-n 0 registered [ 5.331940] PowerMac i2c bus uni-n 1 registered [ 5.339224] TCP cubic registered [ 5.346316] registered taskstats version 1 [ 5.353571] input: PMU as /devices/virtual/input/input1 [ 5.360509] Registered led device: pmu-led::front [ 5.367458] drivers/rtc/hctosys.c: unable to open rtc device (y) [ 5.374392] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 5.381322] Freeing unused kernel memory: 192k init [ 5.448614] udev: starting version 151 [ 5.586248] usb 2-1: configuration #1 chosen from 1 choice [ 5.740152] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 5.748653] ide-gd driver 1.18 [ 5.803628] hda: max request size: 512KiB [ 5.826607] ide-cd driver 5.00 [ 5.862421] PHY ID: 1410cc2, addr: 0 [ 5.863130] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:08:ac:8c [ 5.863134] eth0: Found Marvell 88E1111 PHY [ 5.863215] ohci1394 0002:24:0e.0: enabling device (0000 -> 0002) [ 5.892159] hda: 156301488 sectors (80026 MB), CHS=16383/255/63 [ 5.892259] hda: cache flushes supported [ 5.892388] hda: [mac] hda1 hda2 hda3 hda4 [ 5.916694] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 5.925909] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[4096] IR/IT contexts=[8/8] [ 5.950714] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 5.950726] Uniform CD-ROM driver Revision: 3.20 [ 6.130925] usb 2-2: configuration #1 chosen from 1 choice [ 6.193824] usbcore: registered new interface driver hiddev [ 6.222590] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input2 [ 6.230787] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 [ 6.260564] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input3 [ 6.275711] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 [ 6.276356] usbcore: registered new interface driver usbhid [ 6.276560] usbhid: v2.6:USB HID core driver [ 6.336312] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input4 [ 6.355351] apple 0003:05AC:020E.0003: input,hidraw2: USB HID v1.10 Keyboard [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input0 [ 6.373810] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.2/input/input5 [ 6.397168] apple 0003:05AC:020E.0004: input,hidraw3: USB HID v1.10 Device [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input2 [ 6.460536] kjournald starting. Commit interval 5 seconds [ 6.470562] EXT3-fs: mounted filesystem with writeback data mode. [ 7.252223] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001451fffe08ac8c] [ 31.062205] eth0: Link is up at 100 Mbps, full-duplex. [ 35.388817] Adding 3023748k swap on /dev/hda4. Priority:-1 extents:1 across:3023748k [ 35.451342] udev: starting version 151 [ 35.892852] Linux agpgart interface v0.103 [ 35.982559] usb 2-1: USB disconnect, address 2 [ 35.984567] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108 [ 35.995884] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) [ 36.091580] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 36.144344] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 36.145832] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 36.148748] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 36.159868] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 36.193434] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input6 [ 36.193675] usbcore: registered new interface driver appletouch [ 36.199017] EXT3 FS on hda3, internal journal [ 36.326580] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 36.330110] ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 36.332135] ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 36.365463] usb 2-1: new full speed USB device using ohci_hcd and address 4 [ 36.412475] irq: irq 57 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 57 [ 36.412517] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58 [ 36.419184] yenta_cardbus 0001:10:13.0: CardBus bridge found [0000:0000] [ 36.419204] yenta_cardbus 0001:10:13.0: Enabling burst memory read transactions [ 36.419210] yenta_cardbus 0001:10:13.0: Using CSCINT to route CSC interrupts to PCI [ 36.419214] yenta_cardbus 0001:10:13.0: Routing CardBus interrupts to PCI [ 36.419220] yenta_cardbus 0001:10:13.0: TI: mfunc 0x00001002, devctl 0x60 [ 36.423623] ams: Found I2C based motion sensor [ 36.522144] yenta_cardbus 0001:10:13.0: ISA IRQ mask 0x0000, PCI irq 53 [ 36.522152] yenta_cardbus 0001:10:13.0: Socket status: 30000007 [ 36.522164] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff [ 36.522171] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff [ 36.522176] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xafffffff [ 36.759002] usb 2-1: configuration #1 chosen from 1 choice [ 36.833383] cfg80211: Calling CRDA to update world regulatory domain [ 36.899646] cfg80211: World regulatory domain updated: [ 36.899658] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.899662] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.899666] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 36.899670] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 36.899674] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.899678] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.955406] Bluetooth: Core ver 2.15 [ 36.978972] NET: Registered protocol family 31 [ 36.978979] Bluetooth: HCI device and connection manager initialized [ 36.978985] Bluetooth: HCI socket layer initialized [ 37.054569] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 37.056041] usbcore: registered new interface driver btusb [ 37.417114] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 37.777816] eth0: Link is up at 100 Mbps, full-duplex. [ 37.777825] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) [ 38.019610] NET: Registered protocol family 10 [ 38.020948] lo: Disabled Privacy Extensions [ 38.034298] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 38.034333] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 38.034351] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 38.066753] NET: Registered protocol family 17 [ 38.181628] snd-aoa-fabric-layout: Using PMF GPIOs [ 38.209887] phy0: Selected rate control algorithm 'minstrel' [ 38.210300] Registered led device: b43-phy0::tx [ 38.210340] Registered led device: b43-phy0::rx [ 38.210369] Registered led device: b43-phy0::radio [ 38.210506] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 38.580533] snd-aoa-codec-tas: found tas3004 [ 38.581451] snd-aoa-fabric-layout: can use this codec [ 38.639554] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 38.639601] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a [ 38.706841] apm_emu: PMU APM Emulation initialized. [ 38.925451] SCSI subsystem initialized [ 38.969651] adt746x: version 1 (supported) [ 38.969660] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 [ 38.969665] sensor 0: CPU/INTREPID BOTTOMSIDE [ 38.969668] sensor 1: CPU BOTTOMSIDE [ 38.969671] sensor 2: PWR SUPPLY BOTTOMSIDE [ 38.979988] adt746x: ADT7467 initializing [ 38.984447] adt746x: Lowering max temperatures from 81, 80, 87 to 70, 50, 70 [ 39.147001] radeonfb 0000:00:10.0: Invalid ROM contents [ 39.147113] radeonfb 0000:00:10.0: Invalid ROM contents [ 39.288864] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 39.337051] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 39.361209] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 39.385999] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 39.480058] hda: host max PIO4 wanted PIO0 selected PIO0 [ 39.509791] [drm] Initialized drm 1.1.0 20060810 [ 39.621993] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 39.739513] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 39.808349] [drm] radeon kernel modesetting enabled. [ 41.707189] Bluetooth: L2CAP ver 2.14 [ 41.707198] Bluetooth: L2CAP socket layer initialized [ 41.760557] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 41.760567] Bluetooth: BNEP filters: protocol multicast [ 41.867607] Bluetooth: SCO (Voice Link) ver 0.6 [ 41.867616] Bluetooth: SCO socket layer initialized [ 68.268816] wlan0: deauthenticating from 00:1f:ca:5c:85:c0 by local choice (reason=3) [ 68.282648] wlan0: direct probe to AP 00:1f:ca:5c:88:c0 (try 1) [ 68.286861] wlan0: direct probe responded [ 68.286873] wlan0: authenticate with AP 00:1f:ca:5c:88:c0 (try 1) [ 68.328137] wlan0: authenticated [ 68.328194] wlan0: associate with AP 00:1f:ca:5c:88:c0 (try 1) [ 68.344751] wlan0: RX AssocResp from 00:1f:ca:5c:88:c0 (capab=0x421 status=0 aid=5) [ 68.344761] wlan0: associated [ 68.345848] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 68.345977] cfg80211: Calling CRDA for country: US [ 68.391052] cfg80211: Current regulatory domain updated by AP to: US [ 68.391064] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 68.391069] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 78.865368] wlan0: no IPv6 routers present