[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Linux version 2.6.33.2-vanilla1 (root@aerith) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #2 Tue Apr 6 18:22:36 PDT 2010 [ 0.000000] Found initrd at 0xc1b00000:0xc1f90000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: PowerBook G4 15" [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x00000000b0000000..0x00000000bfffffff -> 0x00000000b0000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x00000000afffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=512, gen1=511 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal 0x00030000 -> 0x00030000 [ 0.000000] HighMem 0x00030000 -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c052b14c, node_mem_map c05af000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 512 pages used for memmap [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/hda3 ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 262144k [ 0.000000] Memory: 1026000k/1048576k available (5120k kernel code, 21884k reserved, 220k data, 426k bss, 196k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffd0000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfde27000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfde27000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 nr_irqs:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 18.432000 MHz [ 0.000000] time_init: processor frequency = 1499.999994 MHz [ 0.000000] clocksource: timebase mult[d9038e4] shift[22] registered [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.001140] Security Framework initialized [ 0.001169] SELinux: Disabled at boot. [ 0.001190] Mount-cache hash table entries: 512 [ 0.001596] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.005053] devtmpfs: initialized [ 0.005405] NET: Registered protocol family 16 [ 0.006031] MPC7450 family performance monitor hardware support registered [ 0.006090] alloc irq_desc for 42 on node 0 [ 0.006096] alloc kstat_irqs on node 0 [ 0.006106] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.006144] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.006161] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 [ 0.006175] channel 0 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@0 [ 0.006213] alloc irq_desc for 26 on node 0 [ 0.006218] alloc kstat_irqs on node 0 [ 0.006224] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.006245] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.006261] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 [ 0.006284] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.006298] channel 1 bus [ 0.006308] channel 2 bus [ 0.006397] alloc irq_desc for 25 on node 0 [ 0.006402] alloc kstat_irqs on node 0 [ 0.006408] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.006438] alloc irq_desc for 47 on node 0 [ 0.006443] alloc kstat_irqs on node 0 [ 0.006449] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.006587] PCI: Probing PCI hardware [ 0.006765] pci 0000:00:10.0: reg 10: [mem 0xb8000000-0xbfffffff pref] [ 0.006777] pci 0000:00:10.0: reg 14: [io 0x0400-0x04ff] [ 0.006786] pci 0000:00:10.0: reg 18: [mem 0xb0000000-0xb000ffff] [ 0.006806] pci 0000:00:10.0: reg 30: [mem 0xb0020000-0xb003ffff pref] [ 0.006833] pci 0000:00:10.0: supports D1 D2 [ 0.006892] alloc irq_desc for 48 on node 0 [ 0.006896] alloc kstat_irqs on node 0 [ 0.006903] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.007192] pci 0001:10:12.0: reg 10: [mem 0xa0006000-0xa0007fff] [ 0.007236] pci 0001:10:12.0: supports D1 D2 [ 0.007242] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007251] pci 0001:10:12.0: PME# disabled [ 0.007287] pci 0001:10:13.0: reg 10: [mem 0xa0004000-0xa0004fff] [ 0.007311] pci 0001:10:13.0: supports D1 D2 [ 0.007317] pci 0001:10:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007324] pci 0001:10:13.0: PME# disabled [ 0.007363] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff] [ 0.007419] pci 0001:10:19.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.007476] pci 0001:10:1a.0: reg 10: [mem 0xa0003000-0xa0003fff] [ 0.007538] pci 0001:10:1b.0: reg 10: [mem 0xa0002000-0xa0002fff] [ 0.007582] pci 0001:10:1b.0: supports D1 D2 [ 0.007588] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007595] pci 0001:10:1b.0: PME# disabled [ 0.007630] pci 0001:10:1b.1: reg 10: [mem 0xa0001000-0xa0001fff] [ 0.007673] pci 0001:10:1b.1: supports D1 D2 [ 0.007679] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007687] pci 0001:10:1b.1: PME# disabled [ 0.007721] pci 0001:10:1b.2: reg 10: [mem 0xa0000000-0xa00000ff] [ 0.007765] pci 0001:10:1b.2: supports D1 D2 [ 0.007770] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.007778] pci 0001:10:1b.2: PME# disabled [ 0.007832] alloc irq_desc for 52 on node 0 [ 0.007837] alloc kstat_irqs on node 0 [ 0.007843] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52 [ 0.007871] alloc irq_desc for 53 on node 0 [ 0.007876] alloc kstat_irqs on node 0 [ 0.007881] irq: irq 53 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 53 [ 0.007919] alloc irq_desc for 28 on node 0 [ 0.007924] alloc kstat_irqs on node 0 [ 0.007929] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.007961] alloc irq_desc for 29 on node 0 [ 0.007966] alloc kstat_irqs on node 0 [ 0.007972] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.008001] alloc irq_desc for 63 on node 0 [ 0.008006] alloc kstat_irqs on node 0 [ 0.008011] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63 [ 0.008660] pci 0002:24:0d.0: reg 10: [mem 0xf5004000-0xf5007fff] [ 0.008715] pci 0002:24:0e.0: reg 10: [mem 0xf5000000-0xf5000fff] [ 0.008752] pci 0002:24:0e.0: supports D1 D2 [ 0.008758] pci 0002:24:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.008765] pci 0002:24:0e.0: PME# disabled [ 0.008789] pci 0002:24:0f.0: reg 10: [mem 0xf5200000-0xf53fffff] [ 0.008814] pci 0002:24:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref] [ 0.008873] alloc irq_desc for 39 on node 0 [ 0.008878] alloc kstat_irqs on node 0 [ 0.008884] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.008912] alloc irq_desc for 40 on node 0 [ 0.008917] alloc kstat_irqs on node 0 [ 0.008922] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.008952] alloc irq_desc for 41 on node 0 [ 0.008957] alloc kstat_irqs on node 0 [ 0.008962] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.009292] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] [ 0.009318] pci 0001:10:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref] [ 0.009337] pci 0001:10:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff] [ 0.009353] pci 0001:10:13.0: BAR 7: assigned [io 0x1000-0x10ff] [ 0.009367] pci 0001:10:13.0: BAR 8: assigned [io 0x1100-0x11ff] [ 0.009381] pci 0001:10:13.0: CardBus bridge to [bus 11-14] [ 0.009394] pci 0001:10:13.0: bridge window [io 0x1000-0x10ff] [ 0.009418] pci 0001:10:13.0: bridge window [io 0x1100-0x11ff] [ 0.009438] pci 0001:10:13.0: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.009463] pci 0001:10:13.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.009501] pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff] [ 0.009508] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.009515] pci_bus 0000:00: resource 2 [mem 0xb0000000-0xbfffffff] [ 0.009523] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff] [ 0.009530] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff] [ 0.009537] pci_bus 0001:10: resource 2 [mem 0x80000000-0xafffffff] [ 0.009545] pci_bus 0001:11: resource 0 [io 0x1000-0x10ff] [ 0.009551] pci_bus 0001:11: resource 1 [io 0x1100-0x11ff] [ 0.009559] pci_bus 0001:11: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.009566] pci_bus 0001:11: resource 3 [mem 0x88000000-0x8bffffff] [ 0.009574] pci_bus 0002:24: resource 0 [io 0xff7fe000-0xffffdfff] [ 0.009581] pci_bus 0002:24: resource 1 [mem 0xf5000000-0xf5ffffff] [ 0.011013] bio: create slab at 0 [ 0.011267] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.011313] vgaarb: loaded [ 0.011522] usbcore: registered new interface driver usbfs [ 0.011571] usbcore: registered new interface driver hub [ 0.011639] usbcore: registered new device driver usb [ 0.011980] NET: Registered protocol family 8 [ 0.011998] NET: Registered protocol family 20 [ 0.012040] Switching to clocksource timebase [ 0.012458] NET: Registered protocol family 2 [ 0.012539] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.012972] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.015181] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.015780] TCP: Hash tables configured (established 131072 bind 65536) [ 0.015807] TCP reno registered [ 0.015825] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.015861] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.016083] NET: Registered protocol family 1 [ 0.016198] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.016343] Trying to unpack rootfs image as initramfs... [ 0.263230] Freeing initrd memory: 4672k freed [ 0.264041] Registering PowerMac CPU frequency driver [ 0.264062] Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz [ 0.269005] audit: initializing netlink socket (disabled) [ 0.269038] type=2000 audit(1270606587.266:1): initialized [ 0.269251] highmem bounce pool size: 64 pages [ 0.271067] VFS: Disk quotas dquot_6.5.2 [ 0.271148] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.271222] fuse init (API version 7.13) [ 0.271375] msgmni has been set to 1502 [ 0.271653] alg: No test for stdrng (krng) [ 0.271678] io scheduler noop registered [ 0.271787] io scheduler cfq registered (default) [ 0.271935] Using unsupported 1280x854 ATY,Jasper_A at b8008000, depth=8, pitch=1280 [ 0.293416] Console: switching to colour frame buffer device 160x53 [ 0.314569] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_A@0 [ 0.314894] Using unsupported 640x480 ATY,Jasper_B at ba008000, depth=8, pitch=768 [ 0.315198] fb1: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_B@1 [ 0.317411] Generic non-volatile memory driver v1.1 [ 0.317614] Linux agpgart interface v0.103 [ 0.317758] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 0.319425] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 0.319675] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 0.319957] [drm] Initialized drm 1.1.0 20060810 [ 0.320113] [drm] radeon defaulting to kernel modesetting. [ 0.320274] [drm] radeon kernel modesetting enabled. [ 0.320484] radeon 0000:00:10.0: enabling device (0006 -> 0007) [ 0.324653] [drm] radeon: Initializing kernel modesetting. [ 0.324953] [drm] register mmio base: 0xB0000000 [ 0.325093] [drm] register mmio size: 65536 [ 0.325232] radeon 0000:00:10.0: Invalid ROM contents [ 0.325444] radeon 0000:00:10.0: Invalid ROM contents [ 0.325597] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM [ 0.325988] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 0.326158] [drm] Using generic clock info [ 0.326300] [drm] Generation 2 PCI interface, using max accessible memory [ 0.326527] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode [ 0.326739] radeon 0000:00:10.0: putting AGP V2 device into 4x mode [ 0.326972] [drm] radeon: VRAM 64M [ 0.327071] [drm] radeon: VRAM from 0x10000000 to 0x13FFFFFF [ 0.327235] [drm] radeon: GTT 256M [ 0.327333] [drm] radeon: GTT from 0x00000000 to 0x0FFFFFFF [ 0.327557] [drm] radeon: irq initialized. [ 0.334259] [drm] Detected VRAM RAM=64M, BAR=128M [ 0.340845] [drm] RAM width 128bits DDR [ 0.347407] [TTM] Zone kernel: Available graphics memory: 384610 kiB. [ 0.353995] [TTM] Zone highmem: Available graphics memory: 515682 kiB. [ 0.360515] [drm] radeon: 64M of VRAM memory ready [ 0.366981] [drm] radeon: 256M of GTT memory ready. [ 0.373605] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 0.379990] [drm] radeon: cp idle (0x10000C03) [ 0.386363] [drm] Loading R300 Microcode [ 0.392633] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 60.398776] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [ 60.405225] [drm:r100_cp_init] *ERROR* Failed to load firmware! [ 60.411715] radeon 0000:00:10.0: failled initializing CP (-2). [ 60.418207] radeon 0000:00:10.0: Disabling GPU acceleration [ 60.424680] [drm] radeon: cp finalized [ 60.431405] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 60.437835] [drm] radeon: cp finalized [ 60.444249] [TTM] Zone kernel: Used memory at exit: 0 kiB. [ 60.450699] [TTM] Zone highmem: Used memory at exit: 0 kiB. [ 60.457087] [drm] radeon: ttm finalized [ 60.463454] [drm] Forcing AGP to PCI mode [ 60.469838] radeon 0000:00:10.0: Invalid ROM contents [ 60.476213] radeon 0000:00:10.0: Invalid ROM contents [ 60.482403] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM [ 60.488821] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 60.494929] [drm] Using generic clock info [ 60.500894] [drm] Generation 2 PCI interface, using max accessible memory [ 60.506851] [drm] radeon: VRAM 64M [ 60.512608] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [ 60.518416] [drm] radeon: GTT 512M [ 60.524118] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [ 60.529898] [drm] radeon: irq initialized. [ 60.535640] [drm] Detected VRAM RAM=64M, BAR=128M [ 60.541346] [drm] RAM width 128bits DDR [ 60.547051] [TTM] Zone kernel: Available graphics memory: 384610 kiB. [ 60.552844] [TTM] Zone highmem: Available graphics memory: 515682 kiB. [ 60.558564] [drm] radeon: 64M of VRAM memory ready [ 60.564217] [drm] radeon: 512M of GTT memory ready. [ 60.569815] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 60.578759] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 60.584589] [drm] radeon: cp idle (0x10000C03) [ 60.590458] [drm] Loading R300 Microcode [ 60.596172] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 120.598776] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [ 120.604630] [drm:r100_cp_init] *ERROR* Failed to load firmware! [ 120.610467] radeon 0000:00:10.0: failled initializing CP (-2). [ 120.616267] radeon 0000:00:10.0: Disabling GPU acceleration [ 120.621982] [drm] radeon: cp finalized [ 120.629283] [drm] Connector Table: 3 (powerbook external tmds) [ 120.635125] [drm] Panel info derived from registers [ 120.640878] [drm] Panel Size 1280x854 [ 120.646839] [drm] Radeon Display Connectors [ 120.652576] [drm] Connector 0: [ 120.658244] [drm] LVDS [ 120.663851] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 120.669523] [drm] Encoders: [ 120.675167] [drm] LCD1: INTERNAL_LVDS [ 120.680780] [drm] Connector 1: [ 120.686385] [drm] DVI-I [ 120.691909] [drm] HPD2 [ 120.697363] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 120.702937] [drm] Encoders: [ 120.708375] [drm] DFP2: INTERNAL_DVO1 [ 120.713751] [drm] CRT1: INTERNAL_DAC1 [ 120.719009] [drm] Connector 2: [ 120.724177] [drm] S-video [ 120.729297] [drm] Encoders: [ 120.734328] [drm] TV1: INTERNAL_DAC2 [ 121.037762] [drm] Determined LVDS native mode details from EDID [ 121.139245] [drm] fb mappable at 0xB8040000 [ 121.144301] [drm] vram apper at 0xB8000000 [ 121.149359] [drm] size 4372480 [ 121.154340] [drm] fb depth is 24 [ 121.159311] [drm] pitch is 5120 [ 121.164246] fb: conflicting fb hw usage radeondrmfb vs OFfb ATY,Jasper - removing generic driver [ 121.169529] Console: switching to colour dummy device 80x25 [ 121.169646] Trying to free nonexistent resource <00000000b8008000-00000000b8112dff> [ 121.169757] fb0: radeondrmfb frame buffer device [ 121.169765] registered panic notifier [ 121.169778] [drm] Initialized radeon 2.0.0 20080528 for 0000:00:10.0 on minor 0 [ 121.171224] brd: module loaded [ 121.171285] MacIO PCI driver attached to Intrepid chipset [ 121.171523] alloc irq_desc for 32 on node 0 [ 121.171527] alloc kstat_irqs on node 0 [ 121.171535] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 121.171664] alloc irq_desc for 24 on node 0 [ 121.171667] alloc kstat_irqs on node 0 [ 121.171670] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 121.171680] alloc irq_desc for 16 on node 0 [ 121.171683] alloc kstat_irqs on node 0 [ 121.171686] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 121.171742] alloc irq_desc for 22 on node 0 [ 121.171745] alloc kstat_irqs on node 0 [ 121.171748] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 121.171758] alloc irq_desc for 17 on node 0 [ 121.171760] alloc kstat_irqs on node 0 [ 121.171763] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 121.171773] alloc irq_desc for 18 on node 0 [ 121.171775] alloc kstat_irqs on node 0 [ 121.171778] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 121.171834] alloc irq_desc for 23 on node 0 [ 121.171836] alloc kstat_irqs on node 0 [ 121.171840] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 121.171849] alloc irq_desc for 19 on node 0 [ 121.171851] alloc kstat_irqs on node 0 [ 121.171854] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 121.171864] alloc irq_desc for 20 on node 0 [ 121.171866] alloc kstat_irqs on node 0 [ 121.171869] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 121.172109] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 121.172369] Uniform Multi-Platform E-IDE driver [ 121.172514] ide-pmac 0002:24:0d.0: enabling device (0000 -> 0002) [ 121.172620] adb: starting probe task... [ 121.172634] adb: finished probe task... [ 122.188729] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 122.188760] Probing IDE interface ide0... [ 122.462236] hda: TOSHIBA MK8026GAX, ATA DISK drive [ 123.102102] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 123.102149] hda: UDMA/100 mode selected [ 123.102215] ide0 at 0xf1192000-0xf1192070,0xf1192160 on irq 39 [ 124.118725] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24 [ 124.118752] Probing IDE interface ide1... [ 124.498900] hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive [ 124.818748] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 124.818934] hdc: MWDMA2 mode selected [ 124.819150] ide1 at 0xf107a000-0xf107a070,0xf107a160 on irq 24 [ 124.819284] Fixed MDIO Bus: probed [ 124.819391] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 124.819436] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) [ 124.819456] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 124.819551] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 124.842082] ehci_hcd 0001:10:1b.2: irq 63, io mem 0xa0000000 [ 124.852054] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 124.852283] hub 1-0:1.0: USB hub found [ 124.852299] hub 1-0:1.0: 5 ports detected [ 124.852398] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 124.852434] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 124.852456] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) [ 124.852475] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 124.852534] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 124.852570] ohci_hcd 0001:10:1a.0: irq 29, io mem 0xa0003000 [ 124.925072] hub 2-0:1.0: USB hub found [ 124.925087] hub 2-0:1.0: 2 ports detected [ 124.925153] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) [ 124.925171] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 124.925265] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 124.925292] ohci_hcd 0001:10:1b.0: irq 63, io mem 0xa0002000 [ 124.995062] hub 3-0:1.0: USB hub found [ 124.995076] hub 3-0:1.0: 3 ports detected [ 124.995140] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) [ 124.995156] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 124.995229] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 124.995255] ohci_hcd 0001:10:1b.1: irq 63, io mem 0xa0001000 [ 125.065046] hub 4-0:1.0: USB hub found [ 125.065058] hub 4-0:1.0: 2 ports detected [ 125.065185] usbcore: registered new interface driver libusual [ 125.065289] mice: PS/2 mouse device common for all mice [ 125.065359] PowerMac i2c bus pmu 2 registered [ 125.065401] PowerMac i2c bus pmu 1 registered [ 125.065431] PowerMac i2c bus mac-io 0 registered [ 125.065473] PowerMac i2c bus uni-n 0 registered [ 125.065518] PowerMac i2c bus uni-n 1 registered [ 125.065748] TCP cubic registered [ 125.065916] registered taskstats version 1 [ 125.066189] input: PMU as /devices/virtual/input/input1 [ 125.066240] Registered led device: pmu-led::front [ 125.066250] drivers/rtc/hctosys.c: unable to open rtc device (y) [ 125.066280] Freeing unused kernel memory: 196k init [ 125.108048] udev: starting version 151 [ 125.328797] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 125.413831] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 125.456705] ide-gd driver 1.18 [ 125.467064] hda: max request size: 512KiB [ 125.479122] PHY ID: 1410cc2, addr: 0 [ 125.479817] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:08:ac:8c [ 125.479842] eth0: Found Marvell 88E1111 PHY [ 125.479936] ohci1394 0002:24:0e.0: enabling device (0000 -> 0002) [ 125.480746] ide-cd driver 5.00 [ 125.534057] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[4096] IR/IT contexts=[8/8] [ 125.722058] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 125.732132] hda: 156301488 sectors (80026 MB), CHS=16383/255/63 [ 125.732203] hda: cache flushes supported [ 125.732323] hda: [mac] hda1 hda2 hda3 hda4 [ 125.747346] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 125.747376] Uniform CD-ROM driver Revision: 3.20 [ 125.943153] usbcore: registered new interface driver hiddev [ 125.962198] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input2 [ 125.962442] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 [ 125.993149] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input3 [ 125.993433] generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 [ 125.994322] usbcore: registered new interface driver usbhid [ 125.994339] usbhid: USB HID core driver [ 126.005035] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input4 [ 126.005351] apple 0003:05AC:020E.0003: input,hidraw2: USB HID v1.10 Keyboard [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input0 [ 126.012223] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.2/input/input5 [ 126.012587] apple 0003:05AC:020E.0004: input,hidraw3: USB HID v1.10 Device [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input2 [ 126.180024] kjournald starting. Commit interval 5 seconds [ 126.180066] EXT3-fs (hda3): mounted filesystem with writeback data mode [ 126.808898] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001451fffe08ac8c] [ 150.678886] eth0: Link is up at 100 Mbps, full-duplex. [ 155.384496] Adding 3023748k swap on /dev/hda4. Priority:-1 extents:1 across:3023748k [ 155.462845] udev: starting version 151 [ 155.877842] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) [ 155.877894] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243) [ 155.877901] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243) [ 155.877908] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243) [ 155.877914] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243) [ 155.877920] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243) [ 155.881305] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 155.928610] usb 2-1: USB disconnect, address 2 [ 155.931026] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108 [ 156.037411] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 156.055669] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input6 [ 156.055819] usbcore: registered new interface driver appletouch [ 156.158777] EXT3-fs (hda3): using internal journal [ 156.325466] usb 2-1: new full speed USB device using ohci_hcd and address 4 [ 156.339419] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 156.340212] ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 156.341176] ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 156.412667] alloc irq_desc for 57 on node 0 [ 156.412675] alloc kstat_irqs on node 0 [ 156.412682] irq: irq 57 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 57 [ 156.412715] alloc irq_desc for 58 on node 0 [ 156.412718] alloc kstat_irqs on node 0 [ 156.412721] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58 [ 156.418457] ams: Found I2C based motion sensor [ 156.443510] yenta_cardbus 0001:10:13.0: CardBus bridge found [0000:0000] [ 156.443533] yenta_cardbus 0001:10:13.0: Enabling burst memory read transactions [ 156.443539] yenta_cardbus 0001:10:13.0: Using CSCINT to route CSC interrupts to PCI [ 156.443543] yenta_cardbus 0001:10:13.0: Routing CardBus interrupts to PCI [ 156.443550] yenta_cardbus 0001:10:13.0: TI: mfunc 0x00001002, devctl 0x60 [ 156.545666] yenta_cardbus 0001:10:13.0: ISA IRQ mask 0x0000, PCI irq 53 [ 156.545675] yenta_cardbus 0001:10:13.0: Socket status: 30000007 [ 156.545687] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff [ 156.545694] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff [ 156.545699] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xafffffff [ 156.626966] cfg80211: Calling CRDA to update world regulatory domain [ 156.714683] cfg80211: World regulatory domain updated: [ 156.714695] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 156.714700] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 156.714704] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 156.714708] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 156.714712] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 156.714716] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 157.028366] Bluetooth: Core ver 2.15 [ 157.047294] NET: Registered protocol family 31 [ 157.047301] Bluetooth: HCI device and connection manager initialized [ 157.047306] Bluetooth: HCI socket layer initialized [ 157.072824] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 157.076847] usbcore: registered new interface driver btusb [ 157.208426] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 157.219232] alloc irq_desc for 30 on node 0 [ 157.219238] alloc kstat_irqs on node 0 [ 157.219245] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 157.219462] alloc irq_desc for 21 on node 0 [ 157.219466] alloc kstat_irqs on node 0 [ 157.219469] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 157.219485] alloc irq_desc for 27 on node 0 [ 157.219487] alloc kstat_irqs on node 0 [ 157.219490] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 157.410794] snd-aoa-fabric-layout: Using PMF GPIOs [ 157.455567] phy0: Selected rate control algorithm 'minstrel' [ 157.455870] Registered led device: b43-phy0::tx [ 157.455903] Registered led device: b43-phy0::rx [ 157.455932] Registered led device: b43-phy0::radio [ 157.456065] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 157.552897] snd-aoa-codec-tas: found tas3004 [ 157.553673] snd-aoa-fabric-layout: can use this codec [ 157.612295] alloc irq_desc for 61 on node 0 [ 157.612303] alloc kstat_irqs on node 0 [ 157.612311] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 157.612350] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a [ 157.869018] NET: Registered protocol family 10 [ 157.869234] lo: Disabled Privacy Extensions [ 158.043240] apm_emu: PMU APM Emulation initialized. [ 158.182320] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 158.236211] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 158.248172] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 158.269255] SCSI subsystem initialized [ 158.271997] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 158.392549] adt746x: version 1 (supported) [ 158.392560] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 [ 158.392565] sensor 0: CPU/INTREPID BOTTOMSIDE [ 158.392568] sensor 1: CPU BOTTOMSIDE [ 158.392571] sensor 2: PWR SUPPLY BOTTOMSIDE [ 158.401564] adt746x: ADT7467 initializing [ 158.410200] adt746x: Lowering max temperatures from 81, 80, 87 to 70, 50, 70 [ 158.511682] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 158.575776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 158.609475] eth0: Link is up at 100 Mbps, full-duplex. [ 158.609485] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) [ 158.847095] NET: Registered protocol family 17 [ 159.319089] hda: host max PIO4 wanted PIO0 selected PIO0 [ 161.600665] Bluetooth: L2CAP ver 2.14 [ 161.600675] Bluetooth: L2CAP socket layer initialized [ 161.663923] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 161.663933] Bluetooth: BNEP filters: protocol multicast [ 161.743971] Bluetooth: SCO (Voice Link) ver 0.6 [ 161.743980] Bluetooth: SCO socket layer initialized [ 189.765481] wlan0: direct probe to AP 00:1f:ca:5c:88:c0 (try 1) [ 189.766633] wlan0: direct probe responded [ 189.766642] wlan0: authenticate with AP 00:1f:ca:5c:88:c0 (try 1) [ 189.788064] wlan0: authenticated [ 189.788116] wlan0: associate with AP 00:1f:ca:5c:88:c0 (try 1) [ 189.804741] wlan0: RX AssocResp from 00:1f:ca:5c:88:c0 (capab=0x421 status=0 aid=4) [ 189.804751] wlan0: associated [ 189.805877] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 189.806004] cfg80211: Calling CRDA for country: US [ 189.828620] cfg80211: Current regulatory domain updated by AP to: US [ 189.828632] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 189.828637] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 200.792051] wlan0: no IPv6 routers present