Linux version 2.6.34-rc3-00946-g088b525-dirty (tavianator@superfluid) (gcc version 4.4.3 20100316 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Apr 4 23:42:20 EDT 2010 Command line: BOOT_IMAGE=/vmlinuz26-nouveau-git root=/dev/mapper/vg0-root ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e400 (usable) BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe70000 (usable) BIOS-e820: 00000000cfe70000 - 00000000cfe8a000 (ACPI data) BIOS-e820: 00000000cfe8a000 - 00000000cfe8d000 (ACPI NVS) BIOS-e820: 00000000cfe8d000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FF0000000 write-back 3 base 100000000 mask FE0000000 write-back 4 base 120000000 mask FF0000000 write-back 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfe70 max_arch_pfn = 0x400000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009e400 (usable) modified: 000000000009e400 - 00000000000a0000 (reserved) modified: 00000000000dc000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cfe70000 (usable) modified: 00000000cfe70000 - 00000000cfe8a000 (ACPI data) modified: 00000000cfe8a000 - 00000000cfe8d000 (ACPI NVS) modified: 00000000cfe8d000 - 00000000d0000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000130000000 (usable) initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f7d00] f7d00 init_memory_mapping: 0000000000000000-00000000cfe70000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cfe70000 page 4k kernel direct mapping tables up to cfe70000 @ 16000-1c000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 1a000-20000 RAMDISK: 37d2c000 - 37ff0000 ACPI: RSDP 00000000000f7c50 00024 (v02 PTLTD ) ACPI: XSDT 00000000cfe7f1b0 000A4 (v01 MSTEST TESTONLY 06040000 LTP 00000000) ACPI: FACP 00000000cfe89c19 000F4 (v03 INTEL 06040000 PTL 00000003) ACPI: DSDT 00000000cfe82371 07834 (v01 INTEL BR_WATER 06040000 MSFT 03000001) ACPI: FACS 00000000cfe8cfc0 00040 ACPI: TCPA 00000000cfe89d0d 00032 (v01 Phoeni x 06040000 TL 00000000) ACPI: MCFG 00000000cfe89d3f 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: APIC 00000000cfe89d7b 00084 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 00000000cfe89dff 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 00000000cfe89e27 00176 (v01 MSTEST TESTONLY 06040000 LTP 00000000) ACPI: ASF! 00000000cfe89f9d 00063 (v16 CETP CETP 06040000 PTL 00000001) ACPI: SSDT 00000000cfe80ae3 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe80a3d 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe80997 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe808f1 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe8084b 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe807a5 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe806ff 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe80659 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) ACPI: SSDT 00000000cfe7f254 01405 (v01 PmRef CpuPm 00003000 INTL 20050228) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000cfe70 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048062 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3926 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833192 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 early_res array is doubled to 64 at [1b200 - 1b9ff] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 PM: Registered nosave memory: 00000000cfe70000 - 00000000cfe8a000 PM: Registered nosave memory: 00000000cfe8a000 - 00000000cfe8d000 PM: Registered nosave memory: 00000000cfe8d000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880001800000 s83304 r8192 d23192 u524288 pcpu-alloc: s83304 r8192 d23192 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031038 Kernel command line: BOOT_IMAGE=/vmlinuz26-nouveau-git root=/dev/mapper/vg0-root ro PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! early_res array is doubled to 128 at [1ba00 - 1c9ff] Subtract (58 early reservations) #1 [0001000000 - 000161ded8] TEXT DATA BSS #2 [0037d2c000 - 0037ff0000] RAMDISK #3 [000161e000 - 000161e158] BRK #4 [00000f7d10 - 0000100000] BIOS reserved #5 [00000f7d00 - 00000f7d10] MP-table mpf #6 [000009e400 - 000009e971] BIOS reserved #7 [000009eb85 - 00000f7d00] BIOS reserved #8 [000009e971 - 000009eb85] MP-table mpc #9 [0000010000 - 0000012000] TRAMPOLINE #10 [0000012000 - 0000016000] ACPI WAKEUP #11 [0000016000 - 000001a000] PGTABLE #12 [000001a000 - 000001b000] PGTABLE #13 [000161e180 - 000161f180] BOOTMEM #14 [000001b000 - 000001b200] BOOTMEM #15 [0001e20000 - 0001e21000] BOOTMEM #16 [0001e21000 - 0001e22000] BOOTMEM #17 [0002000000 - 0005a00000] MEMMAP 0 #18 [000161f180 - 0001637180] BOOTMEM #19 [0001637180 - 000164f180] BOOTMEM #20 [000164f180 - 0001667180] BOOTMEM #21 [0001668000 - 0001669000] BOOTMEM #22 [000161df00 - 000161df43] BOOTMEM #23 [0001667180 - 0001667420] BOOTMEM #24 [000161df80 - 000161dfe8] BOOTMEM #25 [0001667440 - 00016674a8] BOOTMEM #26 [00016674c0 - 0001667528] BOOTMEM #27 [0001667540 - 00016675a8] BOOTMEM #28 [00016675c0 - 0001667628] BOOTMEM #29 [0001667640 - 00016676a8] BOOTMEM #30 [00016676c0 - 0001667728] BOOTMEM #31 [0001667740 - 00016677a8] BOOTMEM #32 [00016677c0 - 0001667828] BOOTMEM #33 [0001667840 - 00016678a8] BOOTMEM #34 [00016678c0 - 0001667928] BOOTMEM #35 [0001667940 - 0001667960] BOOTMEM #36 [0001667980 - 00016679a0] BOOTMEM #37 [00016679c0 - 00016679ff] BOOTMEM #38 [0001667a00 - 0001667a3f] BOOTMEM #39 [0001800000 - 000181c000] BOOTMEM #40 [0001880000 - 000189c000] BOOTMEM #41 [0001900000 - 000191c000] BOOTMEM #42 [0001980000 - 000199c000] BOOTMEM #43 [0001667a40 - 0001667a48] BOOTMEM #44 [0001667a80 - 0001667a88] BOOTMEM #45 [0001667ac0 - 0001667ad0] BOOTMEM #46 [0001667b00 - 0001667b20] BOOTMEM #47 [0001667b40 - 0001667c70] BOOTMEM #48 [0001667c80 - 0001667cd0] BOOTMEM #49 [0001667d00 - 0001667d50] BOOTMEM #50 [0001669000 - 0001671000] BOOTMEM #51 [000199c000 - 0001d9c000] BOOTMEM #52 [0005a00000 - 0005c00000] BOOTMEM #53 [0001667d80 - 0001667fc0] BOOTMEM #54 [0005c00000 - 0009c00000] BOOTMEM #55 [0001671000 - 0001691000] BOOTMEM #56 [0001691000 - 00016d1000] BOOTMEM #57 [000001ca00 - 0000024a00] BOOTMEM Memory: 4050824k/4980736k available (3058k kernel code, 788488k absent, 141424k reserved, 1632k data, 468k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:768 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2992.963 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5988.33 BogoMIPS (lpj=9976543) Security Framework initialized Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100121 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI #2 CPU2: Thermal monitoring handled by SMI #3 Ok. CPU3: Thermal monitoring handled by SMI Brought up 4 CPUs Total of 4 processors activated (23949.29 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-0c] at [mem 0xf0000000-0xf0cfffff] (base 0xf0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: SSDT 00000000cfe80d42 001DD (v01 PmRef Cpu0Ist 00003000 INTL 20050228) ACPI: SSDT 00000000cfe80f1f 0016E (v01 PmRef Cpu1Ist 00003000 INTL 20050228) ACPI: SSDT 00000000cfe8108d 0016E (v01 PmRef Cpu2Ist 00003000 INTL 20050228) ACPI: SSDT 00000000cfe811fb 0016E (v01 PmRef Cpu3Ist 00003000 INTL 20050228) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-0c] at [mem 0xf0000000-0xf0cfffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf0cfffff] reserved in ACPI motherboard resources ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352) \_SB_.PCI0:_OSC evaluation returned wrong type _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebffbff] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xfdff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] pci 0000:00:1a.7: reg 10: [mem 0xe4504000-0xe45043ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xe4500000-0xe4503fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1d.7: reg 10: [mem 0xe4504400-0xe45047ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO pci 0000:00:1f.2: reg 10: [io 0x1c30-0x1c37] pci 0000:00:1f.2: reg 14: [io 0x1c24-0x1c27] pci 0000:00:1f.2: reg 18: [io 0x1c28-0x1c2f] pci 0000:00:1f.2: reg 1c: [io 0x1c20-0x1c23] pci 0000:00:1f.2: reg 20: [io 0x18f0-0x18ff] pci 0000:00:1f.2: reg 24: [io 0x18e0-0x18ef] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xe4504800-0xe45048ff] pci 0000:00:1f.3: reg 20: [io 0x18c0-0x18df] pci 0000:00:1f.5: reg 10: [io 0x1c48-0x1c4f] pci 0000:00:1f.5: reg 14: [io 0x1c3c-0x1c3f] pci 0000:00:1f.5: reg 18: [io 0x1c40-0x1c47] pci 0000:00:1f.5: reg 1c: [io 0x1c38-0x1c3b] pci 0000:00:1f.5: reg 20: [io 0x1c10-0x1c1f] pci 0000:00:1f.5: reg 24: [io 0x1c00-0x1c0f] pci 0000:00:1f.5: PME# supported from D3hot pci 0000:00:1f.5: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xe0300000-0xe0303fff] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:00:01.0: PCI bridge to [bus 01-04] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xe0300000-0xe3ffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: PME# supported from D0 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:01:00.0: PCI bridge to [bus 02-04] pci 0000:01:00.0: bridge window [io 0x2000-0x2fff] pci 0000:01:00.0: bridge window [mem 0xe1000000-0xe3ffffff] pci 0000:01:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:00.0: reg 10: [mem 0xe1000000-0xe1ffffff] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:04:00.0: reg 1c: [mem 0xe2000000-0xe3ffffff 64bit] pci 0000:04:00.0: reg 24: [io 0x2000-0x207f] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:01.0: PCI bridge to [bus 04-04] pci 0000:02:01.0: bridge window [io 0x2000-0x2fff] pci 0000:02:01.0: bridge window [mem 0xe1000000-0xe3ffffff] pci 0000:02:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 05-06] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe02fffff] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff 64bit pref] pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff] pci 0000:07:00.0: reg 18: [mem 0xe4000000-0xe4000fff 64bit] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:07:00.0: supports D1 D2 pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 07-08] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:09:00.0: reg 10: [mem 0xe4100000-0xe4101fff 64bit] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 09-0a] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0b:00.0: reg 10: [io 0x50f8-0x50ff] pci 0000:0b:00.0: reg 14: [io 0x50dc-0x50df] pci 0000:0b:00.0: reg 18: [io 0x50f0-0x50f7] pci 0000:0b:00.0: reg 1c: [io 0x50d8-0x50db] pci 0000:0b:00.0: reg 20: [io 0x50e0-0x50ef] pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:00:1c.3: PCI bridge to [bus 0b-0c] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0d:07.0: reg 10: [mem 0xe4207000-0xe4207fff] pci 0000:0d:07.0: supports D1 D2 pci 0000:0d:07.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0d:07.0: PME# disabled pci 0000:0d:07.1: reg 10: [mem 0xe4209000-0xe42097ff] pci 0000:0d:07.1: reg 14: [mem 0xe4200000-0xe4203fff] pci 0000:0d:07.1: supports D1 D2 pci 0000:0d:07.1: PME# supported from D0 D1 D2 D3hot pci 0000:0d:07.1: PME# disabled pci 0000:0d:07.2: reg 10: [mem 0xe4208000-0xe4208fff] pci 0000:0d:07.2: supports D1 D2 pci 0000:0d:07.2: PME# supported from D0 D1 D2 D3hot pci 0000:0d:07.2: PME# disabled pci 0000:0d:07.3: reg 10: [mem 0xe4209800-0xe42098ff] pci 0000:0d:07.3: supports D1 D2 pci 0000:0d:07.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0d:07.3: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe42fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebffbff] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode) pci_bus 0000:0e: [bus 0e-11] partially hidden behind transparent bridge 0000:0d [bus 0d-0d] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352) \_SB_.PCI0:_OSC evaluation returned wrong type _OSC request data:1 19 1f ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009e400 - 000000000009ffff reserve RAM buffer: 00000000cfe70000 - 00000000cfffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x0600-0x063f] has been reserved system 00:01: [io 0x0800-0x080f] has been reserved system 00:01: [io 0x1000-0x107f] has been reserved system 00:01: [io 0x1180-0x11bf] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0xfe00] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed45000-0xfed89fff] has been reserved system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved PCI: max bus depth: 3 pci_try_num: 4 pci 0000:00:1e.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe4300000-0xe44fffff pref] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe4600000-0xe47fffff 64bit pref] pci 0000:00:1c.3: BAR 14: assigned [mem 0xe4800000-0xe49fffff] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe4a00000-0xe4bfffff pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] pci 0000:00:1e.0: BAR 13: assigned [io 0x7000-0x7fff] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [io disabled] pci 0000:02:00.0: bridge window [mem disabled] pci 0000:02:00.0: bridge window [mem pref disabled] pci 0000:04:00.0: BAR 6: can't assign mem pref (size 0x20000) pci 0000:02:01.0: PCI bridge to [bus 04-04] pci 0000:02:01.0: bridge window [io 0x2000-0x2fff] pci 0000:02:01.0: bridge window [mem 0xe1000000-0xe3ffffff] pci 0000:02:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: PCI bridge to [bus 02-04] pci 0000:01:00.0: bridge window [io 0x2000-0x2fff] pci 0000:01:00.0: bridge window [mem 0xe1000000-0xe3ffffff] pci 0000:01:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 01-04] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xe0300000-0xe3ffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 05-06] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe02fffff] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff 64bit pref] pci 0000:07:00.0: BAR 6: assigned [mem 0xe4300000-0xe431ffff pref] pci 0000:00:1c.1: PCI bridge to [bus 07-08] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff] pci 0000:00:1c.1: bridge window [mem 0xe4300000-0xe44fffff pref] pci 0000:00:1c.2: PCI bridge to [bus 09-0a] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff] pci 0000:00:1c.2: bridge window [mem 0xe4600000-0xe47fffff 64bit pref] pci 0000:0b:00.0: BAR 6: assigned [mem 0xe4a00000-0xe4a0ffff pref] pci 0000:00:1c.3: PCI bridge to [bus 0b-0c] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.3: bridge window [mem 0xe4800000-0xe49fffff] pci 0000:00:1c.3: bridge window [mem 0xe4a00000-0xe4bfffff pref] pci 0000:0d:07.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref] pci 0000:0d:07.0: BAR 16: assigned [mem 0xec000000-0xefffffff] pci 0000:0d:07.0: BAR 13: assigned [io 0x7000-0x70ff] pci 0000:0d:07.0: BAR 14: assigned [io 0x7400-0x74ff] pci 0000:0d:07.0: CardBus bridge to [bus 0e-11] pci 0000:0d:07.0: bridge window [io 0x7000-0x70ff] pci 0000:0d:07.0: bridge window [io 0x7400-0x74ff] pci 0000:0d:07.0: bridge window [mem 0xe8000000-0xebffffff pref] pci 0000:0d:07.0: bridge window [mem 0xec000000-0xefffffff] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe42fffff] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xebffffff pref] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:02:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0000 -> 0003) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:0d:07.0: enabling device (0004 -> 0007) pci 0000:0d:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebffbff] pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xe0300000-0xe3ffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe3ffffff] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] pci_bus 0000:04: resource 1 [mem 0xe1000000-0xe3ffffff] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0xe0200000-0xe02fffff] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff] pci_bus 0000:07: resource 1 [mem 0xe4000000-0xe40fffff] pci_bus 0000:07: resource 2 [mem 0xe4300000-0xe44fffff pref] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff] pci_bus 0000:09: resource 1 [mem 0xe4100000-0xe41fffff] pci_bus 0000:09: resource 2 [mem 0xe4600000-0xe47fffff 64bit pref] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff] pci_bus 0000:0b: resource 1 [mem 0xe4800000-0xe49fffff] pci_bus 0000:0b: resource 2 [mem 0xe4a00000-0xe4bfffff pref] pci_bus 0000:0d: resource 0 [io 0x7000-0x7fff] pci_bus 0000:0d: resource 1 [mem 0xe4200000-0xe42fffff] pci_bus 0000:0d: resource 2 [mem 0xe8000000-0xebffffff pref] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:0d: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:0d: resource 6 [mem 0x000d0000-0x000d3fff] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:0d: resource 9 [mem 0xd0000000-0xfebffbff] pci_bus 0000:0d: resource 10 [io 0x0d00-0xfdff] pci_bus 0000:0e: resource 0 [io 0x7000-0x70ff] pci_bus 0000:0e: resource 1 [io 0x7400-0x74ff] pci_bus 0000:0e: resource 2 [mem 0xe8000000-0xebffffff pref] pci_bus 0000:0e: resource 3 [mem 0xec000000-0xefffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:04:00.0: Boot video device PCI: CLS 32 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 2832k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000 software IO TLB at phys 0x5c00000 - 0x9c00000 Simple Boot Flag at 0x36 set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1270490006.515:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7917 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352) \_SB_.PCI0:_OSC evaluation returned wrong type _OSC request data:1 0 1f pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13 pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352) \_SB_.PCI0:_OSC evaluation returned wrong type _OSC request data:1 0 1f pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13 pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352) \_SB_.PCI0:_OSC evaluation returned wrong type _OSC request data:1 0 1f pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13 pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352) \_SB_.PCI0:_OSC evaluation returned wrong type _OSC request data:1 0 1f pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13 pcieport 0000:00:1c.3: Requesting control of PCIe PME from ACPI BIOS ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100121/nspredef-352) \_SB_.PCI0:_OSC evaluation returned wrong type _OSC request data:1 0 1f pcieport 0000:00:1c.3: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.3:pcie01 failed with error -13 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Freeing unused kernel memory: 468k freed input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [drm] Initialized drm 1.1.0 20060810 nouveau 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 nouveau 0000:04:00.0: setting latency timer to 64 [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x092580a2) [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:04:00.0: ... appears to be valid [drm] nouveau 0000:04:00.0: BIT BIOS found [drm] nouveau 0000:04:00.0: Bios version 62.92.34.00 [drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02011312 00020030 [drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02033300 00000028 [drm] nouveau 0000:04:00.0: Raw DCB entry 3: 010443f1 00c0c080 [drm] nouveau 0000:04:00.0: Raw DCB entry 4: 0104c3f1 00c0c080 [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:04:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [drm] nouveau 0000:04:00.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07 [drm] nouveau 0000:04:00.0: 2: 0x00002231: type 0x31 idx 2 tag 0x08 [drm] nouveau 0000:04:00.0: 3: 0x00000300: type 0x00 idx 3 tag 0xff [drm] nouveau 0000:04:00.0: 4: 0x00000410: type 0x10 idx 4 tag 0xff [drm] nouveau 0000:04:00.0: 5: 0x00000411: type 0x11 idx 5 tag 0xff [drm] nouveau 0000:04:00.0: 6: 0x00000413: type 0x13 idx 6 tag 0xff [drm] nouveau 0000:04:00.0: 7: 0x00010547: type 0x47 idx 7 tag 0x51 [drm] nouveau 0000:04:00.0: 8: 0x00000631: type 0x31 idx 8 tag 0xff [drm] nouveau 0000:04:00.0: 9: 0x00001731: type 0x31 idx 9 tag 0x07 [drm] nouveau 0000:04:00.0: 10: 0x00002831: type 0x31 idx 10 tag 0x08 [drm] nouveau 0000:04:00.0: 11: 0x00000900: type 0x00 idx 11 tag 0xff [drm] nouveau 0000:04:00.0: 12: 0x00000a10: type 0x10 idx 12 tag 0xff [drm] nouveau 0000:04:00.0: 13: 0x00000a11: type 0x11 idx 13 tag 0xff [drm] nouveau 0000:04:00.0: 14: 0x00000a13: type 0x13 idx 14 tag 0xff [drm] nouveau 0000:04:00.0: 15: 0x00010b31: type 0x31 idx 15 tag 0x51 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCC9E [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD069 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xDDE4 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xDF06 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE136 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE19B [drm] nouveau 0000:04:00.0: 0xE19B: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:04:00.0: 0xB4E8: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xB7CE: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0 [drm] nouveau 0000:04:00.0: Detected 512MiB VRAM [TTM] Zone kernel: Available graphics memory: 2027062 kiB. [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:04:00.0: Allocating FIFO number 1 [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:04:00.0: Detected a LVDS output [drm] nouveau 0000:04:00.0: Detected a TMDS output [drm] nouveau 0000:04:00.0: Detected a DAC output [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [drm] nouveau 0000:04:00.0: Detected a LVDS connector composite sync not supported [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a VGA connector [drm] nouveau 0000:04:00.0: Detected a TV connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected an eDP connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a VGA connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a TV connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring composite sync not supported [drm] nouveau 0000:04:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff88012e35b600 [drm] nouveau 0000:04:00.0: 0xB4EC: parsing output script 1 [drm] nouveau 0000:04:00.0: 0xB3D5: parsing clock script 0 Console: switching to colour frame buffer device 240x75 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0 SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pata_acpi 0000:00:1f.2: setting latency timer to 64 pata_acpi 0000:00:1f.2: PCI INT B disabled pata_acpi 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:1f.5: setting latency timer to 64 pata_acpi 0000:00:1f.5: PCI INT C disabled pata_acpi 0000:0b:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:0b:00.0: setting latency timer to 64 pata_acpi 0000:0b:00.0: PCI INT A disabled ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] pata_jmicron 0000:0b:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pata_jmicron 0000:0b:00.0: setting latency timer to 64 scsi0 : pata_jmicron scsi1 : pata_jmicron ata1: PATA max UDMA/100 cmd 0x50f8 ctl 0x50dc bmdma 0x50e0 irq 19 ata2: PATA max UDMA/100 cmd 0x50f0 ctl 0x50d8 bmdma 0x50e8 irq 19 ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x1c30 ctl 0x1c24 bmdma 0x18f0 irq 17 ata4: SATA max UDMA/133 cmd 0x1c28 ctl 0x1c20 bmdma 0x18f8 irq 17 ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [drm] nouveau 0000:04:00.0: 0xB4E3: parsing clock script 1 ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TMC0, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TMC0 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.5: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c3c bmdma 0x1c10 irq 18 ata6: SATA max UDMA/133 cmd 0x1c40 ctl 0x1c38 bmdma 0x1c18 irq 18 ata6: SATA link down (SStatus 0 SControl 300) ata5: link resume succeeded after 1 retries ata5: SATA link down (SStatus 0 SControl 300) ata4.00: SATA link down (SStatus 0 SControl 300) ata4.01: SATA link down (SStatus 0 SControl 300) ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: TOSHIBA MK2049GSY, LC000A, max UDMA/100 ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.01: ATA-8: TOSHIBA MK2049GSY, LC000A, max UDMA/100 ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK2049GS LC00 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2049GS LC00 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) sd 2:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:1:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com EXT4-fs (dm-2): INFO: recovery required on readonly filesystem EXT4-fs (dm-2): write access will be enabled during recovery EXT4-fs (dm-2): recovery complete EXT4-fs (dm-2): mounted filesystem with ordered data mode rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram udev: starting version 151 sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:1:0: Attached scsi generic sg2 type 0 input: PC Speaker as /devices/platform/pcspkr/input/input5 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:07:00.0: setting latency timer to 64 r8169 0000:07:00.0: irq 29 for MSI/MSI-X r8169 0000:07:00.0: eth0: RTL8168b/8111b at 0xffffc900047bc000, 00:90:f5:8b:3f:a5, XID 18000000 IRQ 29 cfg80211: Calling CRDA to update world regulatory domain usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci_hotplug: PCI Hot Plug PCI Core version: 0.5 i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ram0: unknown partition table brd: module loaded iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:09:00.0: setting latency timer to 64 iwlagn 0000:09:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4504000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: debug port 1 fuse init (API version 7.13) ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 16, io mem 0xe4504400 iwlagn 0000:09:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:09:00.0: irq 30 for MSI/MSI-X iwlagn 0000:09:00.0: firmware: requesting iwlwifi-5000-2.ucode ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 ACPI: AC Adapter [ADP0] (on-line) ACPI: Battery Slot [BAT0] (battery present) firewire_ohci 0000:0d:07.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:09:00.0: loaded firmware version 8.24.2.12 ACPI: WMI: Mapper loaded firewire_ohci: Added fw-ohci device 0000:0d:07.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 yenta_cardbus 0000:0d:07.0: CardBus bridge found [1558:0902] yenta_cardbus 0000:0d:07.0: Enabling burst memory read transactions yenta_cardbus 0000:0d:07.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:0d:07.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:0d:07.0: TI: mfunc 0x01aa1b22, devctl 0x64 usb 3-5: new high speed USB device using ehci_hcd and address 4 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman usbcore: registered new interface driver snd-usb-audio HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/device:01/device:03/LNXVIDEO:01/input/input7 ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no) yenta_cardbus 0000:0d:07.0: ISA IRQ mask 0x0cf8, PCI irq 16 yenta_cardbus 0000:0d:07.0: Socket status: 30000006 pci_bus 0000:0d: Raising subordinate bus# of parent bus (#0d) from #0d to #11 yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff] yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe42fffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe42fffff: excluding 0xe4200000-0xe420ffff yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xebffffff pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xebffffff: excluding 0xe8000000-0xebffffff yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7] yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: clean. yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000d0000-0x000d3fff] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0d3fff: clean. yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean. yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean. yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xfebffbff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xfebffbff: excluding 0xd0000000-0xe4ffffff 0xe8000000-0xf3ffffff 0xfe800000-0xfeffffff yenta_cardbus 0000:0d:07.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xfdff] sdhci-pci 0000:0d:07.3: SDHCI controller found [104c:803c] (rev 0) sdhci-pci 0000:0d:07.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:0d:07.3] using PIO tifm_7xx1 0000:0d:07.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 phy0: Selected rate control algorithm 'iwl-agn-rs' Initializing USB Mass Storage driver... scsi6 : usb-storage 3-5:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) usb 5-1: new low speed USB device using uhci_hcd and address 2 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff firewire_core: created device fw0: GUID 080038560000003d, S400 usbcore: registered new interface driver hiddev input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9 generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 6-1: new full speed USB device using uhci_hcd and address 2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (57 C) usb 6-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config usb 6-1: config 1 has 1 interface, different from the descriptor's value: 4 skipping empty audio interface (v1) snd-usb-audio: probe of 6-1:1.0 failed with error -5 scsi 6:0:0:0: Direct-Access Hitachi HDT721010SLA360 PQ: 0 ANSI: 2 CCS sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 34 00 00 00 sd 6:0:0:0: [sdc] Assuming drive cache: write through sd 6:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 6:0:0:0: [sdc] Assuming drive cache: write through sd 6:0:0:0: [sdc] Attached SCSI disk EXT4-fs (dm-1): mounted filesystem with ordered data mode EXT4-fs (dm-0): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with writeback data mode r8169 0000:07:00.0: eth0: link up r8169 0000:07:00.0: eth0: link up composite sync not supported composite sync not supported [drm] nouveau 0000:04:00.0: Allocating FIFO number 2 [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 2 EXT4-fs (sdc1): recovery complete EXT4-fs (sdc1): mounted filesystem with ordered data mode wlan0: Trigger new scan to find an IBSS to join NET: Registered protocol family 10 lo: Disabled Privacy Extensions wlan0: Trigger new scan to find an IBSS to join wlan0: Creating new IBSS network, BSSID d6:fe:bf:50:53:02 iwlagn 0000:09:00.0: Unable to find TIM Element in beacon iwlagn 0000:09:00.0: Unable to find TIM Element in beacon wlan0: no IPv6 routers present eth0: no IPv6 routers present CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold composite sync not supported composite sync not supported composite sync not supported usb 6-1: USB disconnect, address 2 usb 6-1: new full speed USB device using uhci_hcd and address 3 input: Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.3/input/input10 generic-usb 0003:04D2:9802.0002: input,hidraw1: USB HID v1.00 Device [Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio] on usb-0000:00:1d.1-1/input3 ata3: clearing spurious IRQ ata3: clearing spurious IRQ usb 1-1: new high speed USB device using ehci_hcd and address 2 ata3: clearing spurious IRQ ata3: clearing spurious IRQ usb 1-1: USB disconnect, address 2 ata3: clearing spurious IRQ usb 1-1: new high speed USB device using ehci_hcd and address 3 ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ ata3: clearing spurious IRQ [drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 2 [drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 2 [drm] nouveau 0000:04:00.0: Failed to idle channel 2. [drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 127 vlc[10705]: segfault at 3eb7c980 ip 00007f23099d89af sp 00007f22fcd07910 error 4 in libc-2.11.1.so[7f23099a4000+14d000] Disabling lock debugging due to kernel taint Console: switching to colour VGA+ 80x25 unregistered panic notifier [drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 1 [TTM] Zone kernel: Used memory at exit: 0 kiB. [drm] Module unloaded nouveau 0000:04:00.0: setting latency timer to 64 [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x092580a2) [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:04:00.0: ... appears to be valid [drm] nouveau 0000:04:00.0: BIT BIOS found [drm] nouveau 0000:04:00.0: Bios version 62.92.34.00 [drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02011312 00020030 [drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02033300 00000028 [drm] nouveau 0000:04:00.0: Raw DCB entry 3: 010443f1 00c0c080 [drm] nouveau 0000:04:00.0: Raw DCB entry 4: 0104c3f1 00c0c080 [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:04:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [drm] nouveau 0000:04:00.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07 [drm] nouveau 0000:04:00.0: 2: 0x00002231: type 0x31 idx 2 tag 0x08 [drm] nouveau 0000:04:00.0: 3: 0x00000300: type 0x00 idx 3 tag 0xff [drm] nouveau 0000:04:00.0: 4: 0x00000410: type 0x10 idx 4 tag 0xff [drm] nouveau 0000:04:00.0: 5: 0x00000411: type 0x11 idx 5 tag 0xff [drm] nouveau 0000:04:00.0: 6: 0x00000413: type 0x13 idx 6 tag 0xff [drm] nouveau 0000:04:00.0: 7: 0x00010547: type 0x47 idx 7 tag 0x51 [drm] nouveau 0000:04:00.0: 8: 0x00000631: type 0x31 idx 8 tag 0xff [drm] nouveau 0000:04:00.0: 9: 0x00001731: type 0x31 idx 9 tag 0x07 [drm] nouveau 0000:04:00.0: 10: 0x00002831: type 0x31 idx 10 tag 0x08 [drm] nouveau 0000:04:00.0: 11: 0x00000900: type 0x00 idx 11 tag 0xff [drm] nouveau 0000:04:00.0: 12: 0x00000a10: type 0x10 idx 12 tag 0xff [drm] nouveau 0000:04:00.0: 13: 0x00000a11: type 0x11 idx 13 tag 0xff [drm] nouveau 0000:04:00.0: 14: 0x00000a13: type 0x13 idx 14 tag 0xff [drm] nouveau 0000:04:00.0: 15: 0x00010b31: type 0x31 idx 15 tag 0x51 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCC9E [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD069 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xDDE4 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xDF06 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE136 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE19B [drm] nouveau 0000:04:00.0: 0xB4E8: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xB7CE: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0 [drm] nouveau 0000:04:00.0: Detected 512MiB VRAM [TTM] Zone kernel: Available graphics memory: 2027062 kiB. [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:04:00.0: Allocating FIFO number 1 [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:04:00.0: Detected a LVDS output [drm] nouveau 0000:04:00.0: Detected a TMDS output [drm] nouveau 0000:04:00.0: Detected a DAC output [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [drm] nouveau 0000:04:00.0: Detected a LVDS connector composite sync not supported [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a VGA connector [drm] nouveau 0000:04:00.0: Detected a TV connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected an eDP connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a VGA connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a TV connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring composite sync not supported [drm] nouveau 0000:04:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801168b1800 Console: switching to colour frame buffer device 240x75 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0 composite sync not supported composite sync not supported [drm] nouveau 0000:04:00.0: Allocating FIFO number 2 [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:04:00.0: 0xB4EC: parsing output script 1 [drm] nouveau 0000:04:00.0: 0xB3D5: parsing clock script 0 [drm] nouveau 0000:04:00.0: 0xB4E3: parsing clock script 1 composite sync not supported composite sync not supported composite sync not supported lt-png-test[1099]: segfault at 97aa00 ip 000000000097aa00 sp 00007fff362abc38 error 15 lt-gl-test[1202]: segfault at a0e190 ip 0000000000a0e190 sp 00007fffd6d345b8 error 15 lt-png-test[4833]: segfault at 2be4af0 ip 00002b3dbc6d19c7 sp 00007fffd7c22dc0 error 4 in libdimension.so.0.0.0[2b3dbc6cc000+15000] lt-gl-test[4941]: segfault at 38c0af0 ip 00002b62a90e49c7 sp 00007fff416dca50 error 4 in libdimension.so.0.0.0[2b62a90df000+15000] ata3: clearing spurious IRQ lt-png-test[17211]: segfault at 2aee35a4c4c0 ip 00002aee35a495e7 sp 00002aee3a1cf4c0 error 7 in libdimension.so.0.0.0[2aee35a44000+15000] lt-gl-test[17269]: segfault at 2b56a407b4c0 ip 00002b56a40785e7 sp 00002b56a8c824c0 error 7 in libdimension.so.0.0.0[2b56a4073000+15000] usb 1-1: USB disconnect, address 3 usb 1-1: new high speed USB device using ehci_hcd and address 4 ACPI: EC: GPE storm detected, transactions will use polling mode ata3: clearing spurious IRQ usb 1-1: USB disconnect, address 4 ata3: clearing spurious IRQ usb 1-1: new high speed USB device using ehci_hcd and address 5 usb 1-1: USB disconnect, address 5 usb 1-1: new high speed USB device using ehci_hcd and address 6 lt-png-test[25797]: segfault at 1e ip 00002b228fde8289 sp 00007fff384b1930 error 4 in libdimension.so.0.0.0[2b228fddb000+16000] lt-gl-test[25900]: segfault at 2b3b11492990 ip 00002b3b11492990 sp 00007fff9039adb8 error 15 usb 1-1: USB disconnect, address 6 ata3: clearing spurious IRQ usb 1-1: new high speed USB device using ehci_hcd and address 7 usb 1-1: USB disconnect, address 7 [drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 2 [drm] nouveau 0000:04:00.0: PFIFO_CACHE_ERROR - Ch 2/0 Mthd 0x0000 Data 0x01000000 [drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 2 [drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 2 [drm] nouveau 0000:04:00.0: Failed to idle channel 2. [drm] nouveau 0000:04:00.0: PFIFO_DMA_PUSHER - Ch 127 Console: switching to colour VGA+ 80x25 unregistered panic notifier [drm] nouveau 0000:04:00.0: nouveau_channel_free: freeing fifo 1 [TTM] Zone kernel: Used memory at exit: 0 kiB. [drm] Module unloaded nouveau 0000:04:00.0: setting latency timer to 64 [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x092580a2) [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:04:00.0: ... appears to be valid [drm] nouveau 0000:04:00.0: BIT BIOS found [drm] nouveau 0000:04:00.0: Bios version 62.92.34.00 [drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02011312 00020030 [drm] nouveau 0000:04:00.0: Raw DCB entry 2: 02033300 00000028 [drm] nouveau 0000:04:00.0: Raw DCB entry 3: 010443f1 00c0c080 [drm] nouveau 0000:04:00.0: Raw DCB entry 4: 0104c3f1 00c0c080 [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:04:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [drm] nouveau 0000:04:00.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07 [drm] nouveau 0000:04:00.0: 2: 0x00002231: type 0x31 idx 2 tag 0x08 [drm] nouveau 0000:04:00.0: 3: 0x00000300: type 0x00 idx 3 tag 0xff [drm] nouveau 0000:04:00.0: 4: 0x00000410: type 0x10 idx 4 tag 0xff [drm] nouveau 0000:04:00.0: 5: 0x00000411: type 0x11 idx 5 tag 0xff [drm] nouveau 0000:04:00.0: 6: 0x00000413: type 0x13 idx 6 tag 0xff [drm] nouveau 0000:04:00.0: 7: 0x00010547: type 0x47 idx 7 tag 0x51 [drm] nouveau 0000:04:00.0: 8: 0x00000631: type 0x31 idx 8 tag 0xff [drm] nouveau 0000:04:00.0: 9: 0x00001731: type 0x31 idx 9 tag 0x07 [drm] nouveau 0000:04:00.0: 10: 0x00002831: type 0x31 idx 10 tag 0x08 [drm] nouveau 0000:04:00.0: 11: 0x00000900: type 0x00 idx 11 tag 0xff [drm] nouveau 0000:04:00.0: 12: 0x00000a10: type 0x10 idx 12 tag 0xff [drm] nouveau 0000:04:00.0: 13: 0x00000a11: type 0x11 idx 13 tag 0xff [drm] nouveau 0000:04:00.0: 14: 0x00000a13: type 0x13 idx 14 tag 0xff [drm] nouveau 0000:04:00.0: 15: 0x00010b31: type 0x31 idx 15 tag 0x51 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCC9E [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD069 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xDDE4 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xDF06 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE136 [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE19B [drm] nouveau 0000:04:00.0: 0xB4E8: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xB7CE: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0 [drm] nouveau 0000:04:00.0: 0xA3CC: parsing output script 0 [drm] nouveau 0000:04:00.0: Detected 512MiB VRAM [TTM] Zone kernel: Available graphics memory: 2027062 kiB. [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:04:00.0: Allocating FIFO number 1 [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:04:00.0: Detected a LVDS output [drm] nouveau 0000:04:00.0: Detected a TMDS output [drm] nouveau 0000:04:00.0: Detected a DAC output [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown [drm] nouveau 0000:04:00.0: Detected a LVDS connector composite sync not supported [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a VGA connector [drm] nouveau 0000:04:00.0: Detected a TV connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected an eDP connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a VGA connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a TV connector [drm] nouveau 0000:04:00.0: no encoders, ignoring [drm] nouveau 0000:04:00.0: Detected a DVI-D connector [drm] nouveau 0000:04:00.0: no encoders, ignoring composite sync not supported [drm] nouveau 0000:04:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff880128990200 Console: switching to colour frame buffer device 240x75 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0 composite sync not supported composite sync not supported [drm] nouveau 0000:04:00.0: Allocating FIFO number 2 [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:04:00.0: 0xB4EC: parsing output script 1 [drm] nouveau 0000:04:00.0: 0xB3D5: parsing clock script 0 [drm] nouveau 0000:04:00.0: 0xB4E3: parsing clock script 1 composite sync not supported composite sync not supported composite sync not supported usb 6-1: USB disconnect, address 3 usb 6-1: new full speed USB device using uhci_hcd and address 4 input: Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.3/input/input11 generic-usb 0003:04D2:9802.0003: input,hidraw1: USB HID v1.00 Device [Altec Lansing Technologies, Inc. Altec Lansing XT2 - USB Audio] on usb-0000:00:1d.1-1/input3 ata3: clearing spurious IRQ composite sync not supported usb 1-1: new high speed USB device using ehci_hcd and address 8 usb 1-1: USB disconnect, address 8 usb 1-1: new high speed USB device using ehci_hcd and address 9 usb 1-1: USB disconnect, address 9 usb 1-1: new high speed USB device using ehci_hcd and address 10 lt-dimension[395]: segfault at 20 ip 00002acc9780246e sp 00007fff43eb6fb0 error 4 in libdimension.so.0.0.0[2acc977f2000+17000] usb 1-1: USB disconnect, address 10 composite sync not supported composite sync not supported composite sync not supported usb 1-1: new high speed USB device using ehci_hcd and address 11 usb 1-1: USB disconnect, address 11 usb 1-1: new high speed USB device using ehci_hcd and address 12 usb 1-1: USB disconnect, address 12 usb 1-1: new high speed USB device using ehci_hcd and address 13 ata3: clearing spurious IRQ ata3: clearing spurious IRQ usb 1-1: USB disconnect, address 13 usb 1-1: new high speed USB device using ehci_hcd and address 14 atkbd serio0: Unknown key pressed (translated set 2, code 0xe1 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e061 ' to make it known. atkbd serio0: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e061 ' to make it known. usb 1-1: USB disconnect, address 14