Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #14: Wed Mar 24 08:33:14 EST 2010 root@beastie.au.alcatel-lucent.com:/var/obj/usr/src/sys/pjdesk amd64 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80cdb000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80cdb1f8. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80cdb8a0. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80cdbed0. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3192098904 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.10-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff Features2=0x649d AMD Features=0x20000800 TSC: P-state invariant real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000d09000 - 0x000000007c230fff, 2069004288 bytes (505128 pages) avail memory = 2056302592 (1961 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfeb00 00024 (v2 DELL ) ACPI: XSDT 0xfd257 00074 (v1 DELL GX620 00000007 ASL 00000061) ACPI: FACP 0xfd34f 000F4 (v3 DELL GX620 00000007 ASL 00000061) ACPI: DSDT 0xfffd4952 03DA4 (v1 DELL dt_ex 00001000 INTL 20050309) ACPI: FACS 0x7fe86c00 00040 ACPI: SSDT 0xfffd8815 000AA (v1 DELL st_ex 00001000 INTL 20050309) ACPI: APIC 0xfd443 00072 (v1 DELL GX620 00000007 ASL 00000061) ACPI: BOOT 0xfd4b5 00028 (v1 DELL GX620 00000007 ASL 00000061) ACPI: ASF! 0xfd4dd 00067 (v16 DELL GX620 00000007 ASL 00000061) ACPI: MCFG 0xfd544 0003E (v1 DELL GX620 00000007 ASL 00000061) ACPI: HPET 0xfd582 00038 (v1 DELL GX620 00000007 ASL 00000061) ACPI: SSDT 0x7fe86c40 00175 (v1 DpgPmm Cpu0Ist 00000011 INTL 20050309) ACPI: SSDT 0x7fe87049 00175 (v1 DpgPmm Cpu1Ist 00000011 INTL 20050309) ACPI: SSDT 0x7fe87452 00140 (v1 DpgPmm CpuPm 00000010 INTL 20050309) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 8 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: level lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 mem: null: VESA: information block 0000 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 0010 00 01 00 01 00 01 0a 01 00 01 20 01 00 01 25 01 0020 00 01 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01 0030 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 0040 a4 01 a5 01 a6 01 b2 01 b3 01 b4 01 b5 01 b6 01 0050 c2 01 c3 01 c4 01 c5 01 c6 01 00 01 83 01 84 01 0060 85 01 86 01 01 01 10 01 11 01 12 01 21 01 03 01 0070 13 01 14 01 15 01 22 01 05 01 16 01 17 01 18 01 0080 23 01 07 01 19 01 1a 01 1b 01 24 01 09 01 0a 01 0090 30 01 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100 41 54 49 20 52 56 33 37 30 00 41 54 49 20 54 65 0110 63 68 6e 6f 6c 6f 67 69 65 73 20 49 6e 63 2e 00 0120 56 33 38 30 00 30 31 2e 30 30 00 00 00 00 00 00 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 56 mode(s) found VESA: v2.0, 16384k memory, flags:0x1, mode table:0xffffff800005d022 (1000022) VESA: ATI RV370 VESA: ATI Technologies Inc. V380 01.00 ichwd module loaded io: random: nfslock: pseudo-device acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff8000006000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.XBAR -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.P40C -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.P41C -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f00000 (3) failed acpi0: reservation of 1000000, 7ee86c00 (3) failed ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2770, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2771, revid=0x02 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d0, revid=0x01 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d2, revid=0x01 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27c8, revid=0x01 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[20]: type I/O Port, range 32, base 0xff80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 21 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80 found-> vendor=0x8086, dev=0x27c9, revid=0x01 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xff60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 22 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff60 found-> vendor=0x8086, dev=0x27ca, revid=0x01 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[20]: type I/O Port, range 32, base 0xff40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff40 found-> vendor=0x8086, dev=0x27cb, revid=0x01 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type I/O Port, range 32, base 0xff20, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff20 found-> vendor=0x8086, dev=0x27cc, revid=0x01 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xffa80800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 21 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xffa80800 found-> vendor=0x8086, dev=0x244e, revid=0xe1 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b8, revid=0x01 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27df, revid=0x01 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27c0, revid=0x01 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xfe00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled map[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfe30, size 2, enabled map[20]: type I/O Port, range 32, base 0xfea0, size 4, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 20 found-> vendor=0x8086, dev=0x27da, revid=0x01 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0xece0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pcib1: irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfe900000-0xfeafffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x5b62, revid=0x00 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[18]: type Memory, range 64, base 0xfe9e0000, size 16, enabled pcib1: requested memory range 0xfe9e0000-0xfe9effff: good map[20]: type I/O Port, range 32, base 0xdc00, size 8, enabled pcib1: requested I/O range 0xdc00-0xdcff: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x5b72, revid=0x00 domain=0, bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 64, base 0xfe9f0000, size 16, enabled pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good vgapci0: port 0xdc00-0xdcff mem 0xe0000000-0xefffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1 drm0: on vgapci0 vgapci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 vgapci0: using IRQ 256 for MSI info: [drm] MSI enabled 1 message(s) vgapci0: Reserved 0x10000 bytes for rid 0x18 type 3 at 0xfe9e0000 vgapci0: child drm0 requested pci_enable_busmaster info: [drm] Initialized radeon 1.31.0 20080613 vgapci1: mem 0xfe9f0000-0xfe9fffff at device 0.1 on pci1 pcib2: irq 16 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfe800000-0xfe8fffff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x14e4, dev=0x1677, revid=0x01 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfe8f0000, size 16, enabled pcib2: requested memory range 0xfe8f0000-0xfe8fffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 pci0:2:0:0: bad VPD cksum, remain 72 bge0: mem 0xfe8f0000-0xfe8fffff irq 16 at device 0.0 on pci2 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfe8f0000 bge0: adjust device control 0x2004 -> 0x5004 bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0018, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:14:22:5c:49:78 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50 bge0: [MPSAFE] bge0: [ITHREAD] pcib3: irq 17 at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xfe700000-0xfe7fffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 uhci0: port 0xff80-0xff9f irq 21 at device 29.0 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x3000 usbus0: on uhci0 uhci1: port 0xff60-0xff7f irq 22 at device 29.1 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 52 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: on uhci1 uhci2: port 0xff40-0xff5f irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: on uhci2 uhci3: port 0xff20-0xff3f irq 23 at device 29.3 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54 uhci3: [MPSAFE] uhci3: [ITHREAD] usbus3: on uhci3 ehci0: mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: on ehci0 pcib4: at device 30.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xc000-0xcfff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci4: on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x1102, dev=0x0002, revid=0x05 domain=0, bus=4, slot=2, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=3 powerspec 1 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xcce0, size 5, enabled pcib4: requested I/O range 0xcce0-0xccff: in range pcib4: matched entry for 4.2.INTA pcib4: slot 2 INTA hardwired to IRQ 18 found-> vendor=0x1102, dev=0x7002, revid=0x05 domain=0, bus=4, slot=2, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xccd8, size 3, enabled pcib4: requested I/O range 0xccd8-0xccdf: in range pcm0: port 0xcce0-0xccff irq 18 at device 2.0 on pci4 pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xcce0 emu: setmap (1457000, 800), nseg=1, error=0 emu: setmap (1456000, 1000), nseg=1, error=0 pcm0: pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: clone manager: deadline=750ms flags=0x8000001e emu: setmap (144d000, 1000), nseg=1, error=0 emu: setmap (144b000, 1000), nseg=1, error=0 emu: setmap (1449000, 1000), nseg=1, error=0 emu: setmap (14c7000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap 14c4000, 1000; 0xffffff00014c4000 -> 14c4000 pcm0: sndbuf_setmap 14c2000, 1000; 0xffffff00014c2000 -> 14c2000 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] atapci1: port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfea0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 56 atapci1: [MPSAFE] atapci1: [ITHREAD] ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe00 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe10 ata2: reset tp1 mask=03 ostat0=80 ostat1=80 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=50 devices=0x3 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfe20 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfe30 ata3: reset tp1 mask=00 ostat0=ff ostat1=ff ata3: [MPSAFE] ata3: [ITHREAD] ichsmb0: port 0xece0-0xecff irq 17 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xece0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 57 ichsmb0: [MPSAFE] ichsmb0: [ITHREAD] smbus0: on ichsmb0 smb0: on smbus0 atrtc0: port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58 uart0: [FILTER] uart0: fast interrupt cpu0: on acpi0 cpu0: switching to generic Cx mode acpi_perf0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 102d0000102d device_attach: est1 attach returned 6 p4tcc1: on cpu1 isab0: found ICH7 or equivalent chipset: Intel ICH7 watchdog timer isa_probe_children: disabling PnP devices ichwd0: on isa0 isab0: found ICH7 or equivalent chipset: Intel ICH7 watchdog timer ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices ichwd0: at port 0x830-0x837,0x860-0x87f on isa0 isab0: found ICH7 or equivalent chipset: Intel ICH7 watchdog timer ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 orm0: at iomem 0xc0000-0xcafff,0xcb000-0xccfff,0xcd000-0xcffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0 failed to probe at port 0x60 on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 132484 -> 100000 procfs registered linprocfs registered linsysfs registered ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version 3 ZFS storage pool version 14 lapic: Divisor 2, Frequency 99753090 Hz Timecounter "TSC" frequency 3192098904 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting UDMA33 acd0: DVDROM drive at ata0 as master acd0: read 689KB/s (8268KB/s), 254KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2: Identifying devices: 00000003 ata2: New devices: 00000003 ata2-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad0: setting UDMA100 ad0: 38146MB at ata2-master UDMA100 SATA ad0: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ad1: setting UDMA100 ad1: 38146MB at ata2-slave UDMA100 SATA ad1: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue ata3: Identifying devices: 00000000 ata3: New devices: 00000000 lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 hwpmc: TSC/1/64/0x20 P4/18/40/0xfff WARNING: WITNESS option enabled, expect reduced performance. GEOM: new disk ad1 Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered ugen4.2: at usbus4 uhub5: on usbus4 Root mount waiting for: usbus4 uhub5: 4 ports with 4 removable, self powered Root mount waiting for: usbus4 ugen4.3: at usbus4 ums0: on usbus4 ums0: 3 buttons and [XYZ] coordinates ID=0 Trying to mount root from zfs:zroot ugen2.2: at usbus2 ukbd0: on usbus2 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000 ct_to_ts([2010-04-23 03:45:15]) = 1271994315.000000000 start_init: trying /sbin/init bge0: link UP ts_to_ct(1271994336.661830117) = [2010-04-23 03:45:36]