Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.34-rc6 (root@localhost.localdomain) (gcc version 4.1.2 20070626 (rPath Inc.)) #1 SMP Tue May 11 16:15:46 CEST 2010 Command line: initrd=/initrd-2.6.34-rc6.img root=/dev/sda3 drm.debug=0x06 BOOT_IMAGE=/vmlinuz-2.6.34-rc6 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000096400 (usable) BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000db65f000 (usable) BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data) BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS) BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved) BIOS-e820: 00000000dde00000 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000118000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x118000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FE0000000 write-back 3 base 0DC000000 mask FFC000000 uncachable 4 base 100000000 mask FE0000000 write-back 5 base 118000000 mask FF8000000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 512MB, type WB reg 3, base: 3520MB, range: 64MB, type UC reg 4, base: 4GB, range: 512MB, type WB reg 5, base: 4480MB, range: 128MB, type UC total RAM covered: 3904M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 4GB, type WB reg 1, base: 3520MB, range: 64MB, type UC reg 2, base: 3584MB, range: 512MB, type UC reg 3, base: 4GB, range: 256MB, type WB reg 4, base: 4352MB, range: 128MB, type WB e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdb65f max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f2350] f2350 init_memory_mapping: 0000000000000000-00000000db65f000 0000000000 - 00db600000 page 2M 00db600000 - 00db65f000 page 4k kernel direct mapping tables up to db65f000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000118000000 0100000000 - 0118000000 page 2M kernel direct mapping tables up to 118000000 @ c000-12000 RAMDISK: 7fd6b000 - 80000000 ACPI: RSDP 00000000000fe300 00024 (v02 DELL ) ACPI: XSDT 00000000db67de18 00064 (v01 DELL E2 06222004 MSFT 00010013) ACPI: FACP 00000000db75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100121/tbfadt-369) ACPI Warning: 32/64X FACS address mismatch in FADT - DB76BF40/00000000DB76ED40, using 32 (20100121/tbfadt-486) ACPI: DSDT 00000000db73e018 0A5A2 (v01 DELL E2 00001001 INTL 20080729) ACPI: FACS 00000000db76bf40 00040 ACPI: APIC 00000000db67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013) ACPI: TCPA 00000000db76dd18 00032 (v02 00000000 00000000) ACPI: MCFG 00000000db76dc98 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097) ACPI: HPET 00000000db76dc18 00038 (v01 DELL E2 00000001 ASL 00000061) ACPI: BOOT 00000000db76db98 00028 (v01 DELL E2 06222004 AMI 00010013) ACPI: SLIC 00000000db766818 00176 (v03 DELL E2 06222004 MSFT 00010013) ACPI: SSDT 00000000db74d018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000118000000 Initmem setup node 0 0000000000000000-0000000118000000 NODE_DATA [0000000100000000 - 0000000100013fff] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00118000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x00000096 0: 0x00000100 -> 0x000db65f 0: 0x00100000 -> 0x00118000 On node 0 totalpages: 996852 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3933 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 880279 pages, LIFO batch:31 Normal zone: 1344 pages used for memmap Normal zone: 96960 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 24 early_res array is doubled to 64 at [7000 - 77ff] PM: Registered nosave memory: 0000000000096000 - 0000000000097000 PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000 PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000 PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000 PM: Registered nosave memory: 00000000dc000000 - 00000000dde00000 PM: Registered nosave memory: 00000000dde00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880002000000 s89896 r8192 d20696 u262144 early_res array is doubled to 128 at [d000 - dfff] pcpu-alloc: s89896 r8192 d20696 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 981172 Policy zone: Normal Kernel command line: initrd=/initrd-2.6.34-rc6.img root=/dev/sda3 drm.debug=0x06 BOOT_IMAGE=/vmlinuz-2.6.34-rc6 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Subtract (65 early reservations) #1 [0001000000 - 0001dbc5d8] TEXT DATA BSS #2 [007fd6b000 - 0080000000] RAMDISK #3 [0001dbd000 - 0001dbd209] BRK #4 [0000096400 - 00000f2350] BIOS reserved #5 [00000f2350 - 00000f2360] MP-table mpf #6 [00000f2508 - 0000100000] BIOS reserved #7 [00000f2360 - 00000f2508] MP-table mpc #8 [0000001000 - 0000003000] TRAMPOLINE #9 [0000003000 - 0000007000] ACPI WAKEUP #10 [0000008000 - 000000c000] PGTABLE #11 [000000c000 - 000000d000] PGTABLE #12 [0100000000 - 0100014000] NODE_DATA #13 [0001dbd240 - 0001dbe240] BOOTMEM #14 [0100014000 - 01000142e8] BOOTMEM #15 [0100015000 - 0100016000] BOOTMEM #16 [0100016000 - 0100017000] BOOTMEM #17 [0100200000 - 0103a00000] MEMMAP 0 #18 [0001dbe240 - 0001dd6240] BOOTMEM #19 [0001dd6240 - 0001dee240] BOOTMEM #20 [0001dee240 - 0001e06240] BOOTMEM #21 [0001e07000 - 0001e08000] BOOTMEM #22 [0001dbc600 - 0001dbc641] BOOTMEM #23 [0001dbc680 - 0001dbc6c3] BOOTMEM #24 [0001dbc700 - 0001dbcab8] BOOTMEM #25 [0001dbcac0 - 0001dbcb28] BOOTMEM #26 [0001dbcb40 - 0001dbcba8] BOOTMEM #27 [0001dbcbc0 - 0001dbcc28] BOOTMEM #28 [0001dbcc40 - 0001dbcca8] BOOTMEM #29 [0001dbccc0 - 0001dbcd28] BOOTMEM #30 [0001dbcd40 - 0001dbcda8] BOOTMEM #31 [0001dbcdc0 - 0001dbce28] BOOTMEM #32 [0001dbce40 - 0001dbcea8] BOOTMEM #33 [0001dbcec0 - 0001dbcf28] BOOTMEM #34 [0001dbcf40 - 0001dbcfa8] BOOTMEM #35 [0001e06240 - 0001e062a8] BOOTMEM #36 [0001e062c0 - 0001e06328] BOOTMEM #37 [0001e06340 - 0001e063a8] BOOTMEM #38 [0001e063c0 - 0001e06428] BOOTMEM #39 [0001e06440 - 0001e064a8] BOOTMEM #40 [0001e064c0 - 0001e06528] BOOTMEM #41 [0001dbcfc0 - 0001dbcfe0] BOOTMEM #42 [0001e06540 - 0001e06560] BOOTMEM #43 [0001e06580 - 0001e065dc] BOOTMEM #44 [0001e06600 - 0001e0665c] BOOTMEM #45 [0002000000 - 000201d000] BOOTMEM #46 [0002040000 - 000205d000] BOOTMEM #47 [0002080000 - 000209d000] BOOTMEM #48 [00020c0000 - 00020dd000] BOOTMEM #49 [0002100000 - 000211d000] BOOTMEM #50 [0002140000 - 000215d000] BOOTMEM #51 [0002180000 - 000219d000] BOOTMEM #52 [00021c0000 - 00021dd000] BOOTMEM #53 [0001e06680 - 0001e06688] BOOTMEM #54 [0001e066c0 - 0001e066c8] BOOTMEM #55 [0001e06700 - 0001e06720] BOOTMEM #56 [0001e06740 - 0001e06780] BOOTMEM #57 [0001e06780 - 0001e068a0] BOOTMEM #58 [0001e068c0 - 0001e06908] BOOTMEM #59 [0001e06940 - 0001e06988] BOOTMEM #60 [0001e08000 - 0001e10000] BOOTMEM #61 [00021dd000 - 00061dd000] BOOTMEM #62 [0001e10000 - 0001e30000] BOOTMEM #63 [0001e30000 - 0001e70000] BOOTMEM #64 [000000e000 - 0000016000] BOOTMEM Memory: 3846004k/4587520k available (4440k kernel code, 600112k absent, 141404k reserved, 7423k data, 912k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 40632320 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2660.407 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.81 BogoMIPS (lpj=2660407) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: Westmere events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20100121 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 25478 entries in 100 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 02 Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI #2 CPU2: Thermal monitoring handled by SMI #3 CPU3: Thermal monitoring handled by SMI Brought up 4 CPUs Total of 4 processors activated (21279.95 BogoMIPS). regulator: core version 0.5 Time: 20:27:20 Date: 05/11/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000db7eaa18 00474 (v01 PmRef Cpu0Ist 00003000 INTL 20080729) ACPI: SSDT 00000000db7e8018 00842 (v01 PmRef Cpu0Cst 00003001 INTL 20080729) ACPI: SSDT 00000000db7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729) ACPI: SSDT 00000000db7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x70b0-0x70b7] pci 0000:00:16.0: reg 10: [mem 0xf69b0000-0xf69b000f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:16.3: reg 10: [io 0x70a0-0x70a7] pci 0000:00:16.3: reg 14: [mem 0xf6990000-0xf6990fff] pci 0000:00:19.0: reg 10: [mem 0xf6900000-0xf691ffff] pci 0000:00:19.0: reg 14: [mem 0xf6980000-0xf6980fff] pci 0000:00:19.0: reg 18: [io 0x7040-0x705f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xf6970000-0xf69703ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf6960000-0xf6963fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xf6950000-0xf69503ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x7090-0x7097] pci 0000:00:1f.2: reg 14: [io 0x7080-0x7083] pci 0000:00:1f.2: reg 18: [io 0x7070-0x7077] pci 0000:00:1f.2: reg 1c: [io 0x7060-0x7063] pci 0000:00:1f.2: reg 20: [io 0x7020-0x703f] pci 0000:00:1f.2: reg 24: [mem 0xf6940000-0xf69407ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xf6930000-0xf69300ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x7000-0x701f] pci 0000:00:1f.6: reg 10: [mem 0xf6920000-0xf6920fff 64bit] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf68fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: reg 10: [mem 0xf4100000-0xf4101fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xf2c40000-0xf2c40fff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: reg 10: [mem 0xf2c30000-0xf2c300ff] pci 0000:03:00.1: supports D1 D2 pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.1: PME# disabled pci 0000:03:00.4: reg 10: [mem 0xf2c00000-0xf2c007ff] pci 0000:03:00.4: supports D1 D2 pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.4: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 03-04] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci_bus 0000:04: [bus 04-07] partially hidden behind bridge 0000:03 [bus 03-04] pci 0000:00:1c.3: PCI bridge to [bus 05-0a] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 19 1f ACPI: PCI Root Bridge [CPBG] (0000:3f) ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 0000000000096400 - 000000000009ffff reserve RAM buffer: 00000000db65f000 - 00000000dbffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x1000-0x1003] has been reserved system 00:05: [io 0x1004-0x1013] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:05: [io 0x164e-0x164f] has been reserved system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0b: [mem 0xfed10000-0xfed13fff] has been reserved system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0b: [mem 0xfeb00000-0xfeb03fff] has been reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:0b: [mem 0xf69c0000-0xf69c0fff] has been reserved PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6a00000-0xf6bfffff 64bit pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6c00000-0xf6dfffff 64bit pref] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf6e00000-0xf6ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf68fffff] pci 0000:00:1c.0: bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:00:1c.1: bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref] pci 0000:03:00.0: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:03:00.0: BAR 16: can't assign mem (size 0x4000000) pci 0000:03:00.0: BAR 13: assigned [io 0x2000-0x20ff] pci 0000:03:00.0: BAR 14: assigned [io 0x2400-0x24ff] pci 0000:03:00.0: CardBus bridge to [bus 04-07] pci 0000:03:00.0: bridge window [io 0x2000-0x20ff] pci 0000:03:00.0: bridge window [io 0x2400-0x24ff] pci 0000:00:1c.2: PCI bridge to [bus 03-04] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff] pci 0000:00:1c.2: bridge window [mem pref disabled] pci 0000:00:1c.3: PCI bridge to [bus 05-0a] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1c.3: bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] PCI: No. 2 try to assign unassigned res pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf68fffff] pci 0000:00:1c.0: bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:00:1c.1: bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref] pci 0000:03:00.0: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:03:00.0: BAR 16: can't assign mem (size 0x4000000) pci 0000:03:00.0: CardBus bridge to [bus 04-07] pci 0000:03:00.0: bridge window [io 0x0000-0x00ff] pci 0000:03:00.0: bridge window [io 0x0000-0x00ff] pci 0000:00:1c.2: PCI bridge to [bus 03-04] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff] pci 0000:00:1c.2: bridge window [mem pref disabled] pci 0000:00:1c.3: PCI bridge to [bus 05-0a] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1c.3: bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] PCI: No. 3 try to assign unassigned res release child resource [mem 0xf2c00000-0xf2c007ff] release child resource [mem 0xf2c30000-0xf2c300ff] release child resource [mem 0xf2c40000-0xf2c40fff] pci 0000:00:1c.2: resource 14 [mem 0xf0400000-0xf2cfffff] released pci 0000:00:1c.2: PCI bridge to [bus 03-04] pci 0000:00:1c.2: bridge window [mem disabled] pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:00:1c.2: BAR 14: can't assign mem (size 0x6000000) pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf68fffff] pci 0000:00:1c.0: bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:00:1c.1: bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref] pci 0000:03:00.0: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:03:00.0: BAR 16: can't assign mem (size 0x4000000) pci 0000:03:00.0: BAR 0: can't assign mem (size 0x1000) pci 0000:03:00.4: BAR 0: can't assign mem (size 0x800) pci 0000:03:00.1: BAR 0: can't assign mem (size 0x100) pci 0000:03:00.0: CardBus bridge to [bus 04-07] pci 0000:03:00.0: bridge window [io 0x0000-0x00ff] pci 0000:03:00.0: bridge window [io 0x0000-0x00ff] pci 0000:00:1c.2: PCI bridge to [bus 03-04] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem disabled] pci 0000:00:1c.2: bridge window [mem pref disabled] pci 0000:00:1c.3: PCI bridge to [bus 05-0a] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1c.3: bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:03:00.0: setting latency timer to 64 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] pci_bus 0000:01: resource 1 [mem 0xf5500000-0xf68fffff] pci_bus 0000:01: resource 2 [mem 0xf6a00000-0xf6bfffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf54fffff] pci_bus 0000:02: resource 2 [mem 0xf6c00000-0xf6dfffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff] pci_bus 0000:04: resource 0 [io 0x0000-0x00ff] pci_bus 0000:04: resource 1 [io 0x0000-0x00ff] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] pci_bus 0000:05: resource 1 [mem 0xf2d00000-0xf40fffff] pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6ffffff 64bit pref] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:0b: resource 7 [mem 0xe0000000-0xfeafffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2644k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800021dd000 - ffff8800061dd000 software IO TLB at phys 0x21dd000 - 0x61dd000 Simple Boot Flag at 0xf1 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1273609639.436:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7516 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13 pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13 pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13 pcieport 0000:00:1c.3: Requesting control of PCIe PME from ACPI BIOS \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f pcieport 0000:00:1c.3: Failed to receive control of PCIe PME service: ACPI _OSC failed pcie_pme: probe of 0000:00:1c.3:pcie01 failed with error -13 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory ACPI: Battery Slot [BAT0] (battery present) agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ACPI: Battery Slot [BAT1] (battery absent) serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 0000:00:16.3: ttyS1 at I/O 0x70a0 (irq = 19) is a 16550A brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 alloc irq_desc for 28 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940300 irq 28 ata6: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940380 irq 28 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6970000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34-rc6 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf6950000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34-rc6 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 10:866:497 rtc_cmos 00:06: setting system clock to 2010-05-11 20:27:20 UTC (1273609640) Initalizing network drop monitor service usb 1-1: new high speed USB device using ehci_hcd and address 2 ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-7: INTEL SSDSA2MH080G1GN, 045C8820, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU10N, A102, max UDMA/133, ATAPI AN ata1.00: configured for UDMA/133 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found sda1 sda2 sda3 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU10N A102 PQ: 0 ANSI: 5 hub 1-1:1.0: 6 ports detected sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Freeing unused kernel memory: 912k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1684k freed Freeing unused kernel memory: 1860k freed usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.1: new high speed USB device using ehci_hcd and address 3 usb 1-1.1: New USB device found, idVendor=413c, idProduct=2513 usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1.1:1.0: USB hub found hub 1-1.1:1.0: 3 ports detected usb 1-1.2: new high speed USB device using ehci_hcd and address 4 kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with ordered data mode usb 1-1.2: New USB device found, idVendor=413c, idProduct=2513 usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1.2:1.0: USB hub found hub 1-1.2:1.0: 3 ports detected usb 1-1.4: new high speed USB device using ehci_hcd and address 5 usb 1-1.4: New USB device found, idVendor=05ca, idProduct=1814 usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.4: Product: Laptop_Integrated_Webcam_3M usb 1-1.4: Manufacturer: CN06YWTK7248704104J2 usb 2-1.7: new full speed USB device using ehci_hcd and address 3 usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187 usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.7: Product: DW375 Bluetooth Module usb 2-1.7: Manufacturer: Dell Computer Corp usb 2-1.7: SerialNumber: F07BCBA7291F usb 2-1.8: new full speed USB device using ehci_hcd and address 4 udev: starting version 145 usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800 usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.8: Product: 5880 usb 2-1.8: Manufacturer: Broadcom Corp usb 2-1.8: SerialNumber: 0123456789ABCD usb 2-1.8: config 0 descriptor?? ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100121/evregion-474) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88011344dc40), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECBT] (Node ffff88011344dd20), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECG2] (Node ffff88011344dde0), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECG6] (Node ffff88011344dea0), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BST] (Node ffff88011344f4a0), AE_TIME ACPI Exception: AE_TIME, Evaluating _BST (20100121/battery-439) parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 ppdev: user-space parallel port driver input: PC Speaker as /devices/platform/pcspkr/input/input6 iTCO_vendor_support: vendor-support=0 ACPI: WMI: Mapper loaded yenta_cardbus 0000:03:00.0: No cardbus resource! i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: resource 0000:00:1f.3 [io 0x7000-0x701f] conflicts with ACPI region SMBI [mem 0x00007000-0x0000700f window disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: irq 29 for MSI/MSI-X iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [drm] Initialized drm 1.1.0 20060810 firewire_ohci 0000:03:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16 firewire_ohci 0000:03:00.4: setting latency timer to 64 firewire_ohci: Failed to remap registers firewire_ohci 0000:03:00.4: PCI INT C disabled input: Dell WMI hotkeys as /devices/virtual/input/input7 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb Linux video capture interface: v2.00 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:03:00.1: SDHCI controller found [1180:e822] (rev 3) sdhci-pci 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 sdhci-pci 0000:03:00.1: BAR 0 is not iomem. Aborting. sdhci-pci 0000:03:00.1: PCI INT B disabled uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814) input: Laptop_Integrated_Webcam_3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:02:00.0: setting latency timer to 64 iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 6000 Series 3x3 AGN REV=0x74 iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 iwlagn 0000:02:00.0: irq 30 for MSI/MSI-X iwlagn 0000:02:00.0: firmware: requesting iwlwifi-6000-4.ucode iwlagn 0000:02:00.0: request for firmware file 'iwlwifi-6000-4.ucode' failed. iwlagn 0000:02:00.0: no suitable firmware found! iwlagn 0000:02:00.0: PCI INT A disabled 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:ca:a4:52 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 2041ff-0ff i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. i915 0000:00:02.0: irq 30 for MSI/MSI-X [drm] set up 31M of stolen space Slow work thread pool: Starting up Slow work thread pool: Ready dell-wmi: Received unknown WMI event (0x11) fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 240x67 fb0: inteldrmfb frame buffer device registered panic notifier acpi device:42: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input9 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/hda_codec.c:4358: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4362: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4366: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4367: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4378: inputs: mic=0xa, fmic=0xf, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_sigmatel.c:3013: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 dell-wmi: Received unknown WMI event (0x11) input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 fuse init (API version 7.13) EXT3-fs (sda3): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with ordered data mode microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions e1000e 0000:00:19.0: irq 29 for MSI/MSI-X e1000e 0000:00:19.0: irq 29 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready virbr0: starting userspace STP failed, starting kernel STP dell-wmi: Received unknown WMI event (0x11) dell-wmi: Received unknown WMI event (0x11)