Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33 (root@localhost.localdomain) (gcc version 4.1.2 20070626 (rPath Inc.)) #1 SMP Wed May 12 11:06:33 CEST 2010 Command line: initrd=/initrd-2.6.33.img root=/dev/sda3 drm.debug=0x04 BOOT_IMAGE=/vmlinuz-2.6.33 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000096400 (usable) BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000db65f000 (usable) BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data) BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS) BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved) BIOS-e820: 00000000dde00000 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000118000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. No AGP bridge found last_pfn = 0x118000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FE0000000 write-back 3 base 0DC000000 mask FFC000000 uncachable 4 base 100000000 mask FE0000000 write-back 5 base 118000000 mask FF8000000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 512MB, type WB reg 3, base: 3520MB, range: 64MB, type UC reg 4, base: 4GB, range: 512MB, type WB reg 5, base: 4480MB, range: 128MB, type UC total RAM covered: 3904M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 4GB, type WB reg 1, base: 3520MB, range: 64MB, type UC reg 2, base: 3584MB, range: 512MB, type UC reg 3, base: 4GB, range: 256MB, type WB reg 4, base: 4352MB, range: 128MB, type WB e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdb65f max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f2350] f2350 init_memory_mapping: 0000000000000000-00000000db65f000 0000000000 - 00db600000 page 2M 00db600000 - 00db65f000 page 4k kernel direct mapping tables up to db65f000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000118000000 0100000000 - 0118000000 page 2M kernel direct mapping tables up to 118000000 @ c000-12000 RAMDISK: 7fd6b000 - 7ffff32a ACPI: RSDP 00000000000fe300 00024 (v02 DELL ) ACPI: XSDT 00000000db67de18 00064 (v01 DELL E2 06222004 MSFT 00010013) ACPI: FACP 00000000db75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20091214/tbfadt-369) ACPI Warning: 32/64X FACS address mismatch in FADT - DB76BF40/00000000DB76ED40, using 32 (20091214/tbfadt-486) ACPI: DSDT 00000000db73e018 0A5A2 (v01 DELL E2 00001001 INTL 20080729) ACPI: FACS 00000000db76bf40 00040 ACPI: APIC 00000000db67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013) ACPI: TCPA 00000000db76dd18 00032 (v02 00000000 00000000) ACPI: MCFG 00000000db76dc98 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097) ACPI: HPET 00000000db76dc18 00038 (v01 DELL E2 00000001 ASL 00000061) ACPI: BOOT 00000000db76db98 00028 (v01 DELL E2 06222004 AMI 00010013) ACPI: SLIC 00000000db766818 00176 (v03 DELL E2 06222004 MSFT 00010013) ACPI: SSDT 00000000db74d018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000118000000 Bootmem setup node 0 0000000000000000-0000000118000000 NODE_DATA [000000000000d000 - 0000000000021fff] bootmap [0000000000022000 - 0000000000044fff] pages 23 (12 early reservations) ==> bootmem [0000000000 - 0118000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001dcbd18] TEXT DATA BSS ==> [0001000000 - 0001dcbd18] #2 [007fd6b000 - 007ffff32a] RAMDISK ==> [007fd6b000 - 007ffff32a] #3 [0001dcc000 - 0001dcc209] BRK ==> [0001dcc000 - 0001dcc209] #4 [0000096400 - 00000f2350] BIOS reserved ==> [0000096400 - 00000f2350] #5 [00000f2350 - 00000f2360] MP-table mpf ==> [00000f2350 - 00000f2360] #6 [00000f2508 - 0000100000] BIOS reserved ==> [00000f2508 - 0000100000] #7 [00000f2360 - 00000f2508] MP-table mpc ==> [00000f2360 - 00000f2508] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #10 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #11 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00118000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000096 0: 0x00000100 -> 0x000db65f 0: 0x00100000 -> 0x00118000 On node 0 totalpages: 996853 DMA zone: 56 pages used for memmap DMA zone: 116 pages reserved DMA zone: 3818 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 880279 pages, LIFO batch:31 Normal zone: 1344 pages used for memmap Normal zone: 96960 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000096000 - 0000000000097000 PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000 PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000 PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000 PM: Registered nosave memory: 00000000dc000000 - 00000000dde00000 PM: Registered nosave memory: 00000000dde00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880005800000 s90968 r8192 d23720 u262144 pcpu-alloc: s90968 r8192 d23720 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 981057 Policy zone: Normal Kernel command line: initrd=/initrd-2.6.33.img root=/dev/sda3 drm.debug=0x04 BOOT_IMAGE=/vmlinuz-2.6.33 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3845888k/4587520k available (4710k kernel code, 600108k absent, 141524k reserved, 7157k data, 968k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 40632320 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT spurious 8259A interrupt: IRQ7. Detected 2660.596 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.19 BogoMIPS (lpj=2660596) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 using mwait in idle threads. Performance Events: Nehalem/Corei7 events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20091214 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 27710 entries in 109 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 02 Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 #2 CPU2: Thermal monitoring handled by SMI CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 #3 CPU3: Thermal monitoring handled by SMI CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 Brought up 4 CPUs Total of 4 processors activated (21280.33 BogoMIPS). regulator: core version 0.5 Time: 11:14:26 Date: 05/12/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 ACPI: No dock devices found. \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] (ignored) pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x70b0-0x70b7] pci 0000:00:16.0: reg 10: [mem 0xf69b0000-0xf69b000f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:16.3: reg 10: [io 0x70a0-0x70a7] pci 0000:00:16.3: reg 14: [mem 0xf6990000-0xf6990fff] pci 0000:00:19.0: reg 10: [mem 0xf6900000-0xf691ffff] pci 0000:00:19.0: reg 14: [mem 0xf6980000-0xf6980fff] pci 0000:00:19.0: reg 18: [io 0x7040-0x705f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xf6970000-0xf69703ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf6960000-0xf6963fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xf6950000-0xf69503ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x7090-0x7097] pci 0000:00:1f.2: reg 14: [io 0x7080-0x7083] pci 0000:00:1f.2: reg 18: [io 0x7070-0x7077] pci 0000:00:1f.2: reg 1c: [io 0x7060-0x7063] pci 0000:00:1f.2: reg 20: [io 0x7020-0x703f] pci 0000:00:1f.2: reg 24: [mem 0xf6940000-0xf69407ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xf6930000-0xf69300ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x7000-0x701f] pci 0000:00:1f.6: reg 10: [mem 0xf6920000-0xf6920fff 64bit] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf68fffff] pci 0000:02:00.0: reg 10: [mem 0xf4100000-0xf4101fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:03:00.0: reg 10: [mem 0xf2c40000-0xf2c40fff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: reg 10: [mem 0xf2c30000-0xf2c300ff] pci 0000:03:00.1: supports D1 D2 pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.1: PME# disabled pci 0000:03:00.4: reg 10: [mem 0xf2c00000-0xf2c007ff] pci 0000:03:00.4: supports D1 D2 pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.4: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 03-04] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff] pci_bus 0000:04: [bus 04-07] partially hidden behind bridge 0000:03 [bus 03-04] pci 0000:00:1c.3: PCI bridge to [bus 05-0a] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 19 1f ACPI: PCI Root Bridge [CPBG] (0000:3f) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x1000-0x1003] has been reserved system 00:05: [io 0x1004-0x1013] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:05: [io 0x164e-0x164f] has been reserved system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0b: [mem 0xfed10000-0xfed13fff] has been reserved system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0b: [mem 0xfeb00000-0xfeb03fff] has been reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:0b: [mem 0xf69c0000-0xf69c0fff] has been reserved pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6a00000-0xf6bfffff 64bit pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6c00000-0xf6dfffff 64bit pref] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf6e00000-0xf6ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf68fffff] pci 0000:00:1c.0: bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:00:1c.1: bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref] pci 0000:03:00.0: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:03:00.0: BAR 16: can't assign mem (size 0x4000000) pci 0000:03:00.0: BAR 13: assigned [io 0x2000-0x20ff] pci 0000:03:00.0: BAR 14: assigned [io 0x2400-0x24ff] pci 0000:03:00.0: CardBus bridge to [bus 04-07] pci 0000:03:00.0: bridge window [io 0x2000-0x20ff] pci 0000:03:00.0: bridge window [io 0x2400-0x24ff] pci 0000:00:1c.2: PCI bridge to [bus 03-04] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff] pci 0000:00:1c.2: bridge window [mem pref disabled] pci 0000:00:1c.3: PCI bridge to [bus 05-0a] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1c.3: bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:03:00.0: setting latency timer to 64 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.PPCE] (Node ffff88011386b860), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\EV4_] (Node ffff880113875f00), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\SMIE] (Node ffff88011386f0c0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\NEVT] (Node ffff88011386f060), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff88011386dc00), AE_NOT_FOUND pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] pci_bus 0000:01: resource 1 [mem 0xf5500000-0xf68fffff] pci_bus 0000:01: resource 2 [mem 0xf6a00000-0xf6bfffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf54fffff] pci_bus 0000:02: resource 2 [mem 0xf6c00000-0xf6dfffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf2cfffff] pci_bus 0000:04: resource 0 [io 0x2000-0x20ff] pci_bus 0000:04: resource 1 [io 0x2400-0x24ff] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] pci_bus 0000:05: resource 1 [mem 0xf2d00000-0xf40fffff] pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6ffffff 64bit pref] pci_bus 0000:0b: resource 3 [io 0x0000-0xffff] pci_bus 0000:0b: resource 4 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2640k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800059de000 - ffff8800099de000 software IO TLB at phys 0x59de000 - 0x99de000 Simple Boot Flag at 0xf1 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1273662865.422:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7516 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1f pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: SSDT 00000000db7eaa18 00474 (v01 PmRef Cpu0Ist 00003000 INTL 20080729) ACPI: SSDT 00000000db7e8018 00842 (v01 PmRef Cpu0Cst 00003001 INTL 20080729) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: SSDT 00000000db7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729) ACPI: SSDT 00000000db7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Ironlake/M Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. alloc irq_desc for 28 on node -1 alloc kstat_irqs on node -1 i915 0000:00:02.0: irq 28 for MSI/MSI-X [drm] set up 31M of stolen space [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x8 0x0 [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [drm:intel_modeset_init], 2 display pipes available. [drm:intel_lvds_init], LVDS is not present in VBT [drm:intel_dp_i2c_init], i2c_init DPDDC-A [drm:intel_dp_i2c_aux_ch], aux_ch nack [drm:intel_dp_i2c_aux_ch], aux_ch nack [drm:intel_dp_i2c_init], i2c_init DPDDC-B [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_i2c_init], i2c_init DPDDC-C [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_i2c_init], i2c_init DPDDC-D [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_link_down], [drm:ironlake_edp_backlight_off], [drm:ironlake_crtc_dpms], crtc 0 dpms off [drm:ironlake_crtc_dpms], crtc 1 dpms off [drm:ironlake_crtc_dpms], crtc 1 is disabled [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 40 92500 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_setup_crtcs], [drm:drm_enable_connectors], connector 5 enabled? no [drm:drm_enable_connectors], connector 7 enabled? yes [drm:drm_enable_connectors], connector 10 enabled? no [drm:drm_enable_connectors], connector 12 enabled? no [drm:drm_enable_connectors], connector 14 enabled? no [drm:drm_enable_connectors], connector 16 enabled? no [drm:drm_enable_connectors], connector 18 enabled? no [drm:drm_enable_connectors], connector 20 enabled? no [drm:drm_target_preferred], looking for cmdline mode on connector 7 [drm:drm_target_preferred], looking for preferred mode on connector 7 [drm:drm_target_preferred], found mode 1920x1080 [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [drm:intelfb_probe], [drm:intelfb_create], allocated 1920x1080 fb: 0x02020000, bo ffff880111b980c0 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:intel_dp_mode_fixup], Display port link bw 06 lane count 2 clock 162000 [drm:ironlake_crtc_dpms], crtc 0 dpms off [drm:ironlake_crtc_dpms], crtc 0 is disabled [drm:ironlake_disable_pll_edp], [drm:intel_crtc_mode_set], Mode for pipe A: [drm:drm_mode_debug_printmodeline], Modeline 26:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:ironlake_disable_pll_edp], [drm:ironlake_set_pll_edp], eDP PLL enable for clock 162000 [drm:intel_pipe_set_base], Writing base 02020000 00000000 0 0 [drm:ironlake_crtc_dpms], crtc 0 dpms on [drm:ironlake_edp_backlight_on], [drm:ironlake_crtc_dpms], crtc 1 dpms off [drm:ironlake_crtc_dpms], crtc 1 is disabled [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 Console: switching to colour frame buffer device 240x67 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 fb0: inteldrmfb frame buffer device registered panic notifier acpi device:42: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input4 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 0000:00:16.3: ttyS1 at I/O 0x70a0 (irq = 19) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input5 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940300 irq 29 ata6: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940380 irq 29 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6970000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf6950000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 10:228:226 rtc_cmos 00:06: setting system clock to 2010-05-12 11:14:27 UTC (1273662867) Initalizing network drop monitor service usb 1-1: new high speed USB device using ehci_hcd and address 2 ata6: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-7: INTEL SSDSA2MH080G1GN, 045C8820, max UDMA/133 ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU10N, A102, max UDMA/133, ATAPI AN ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31) usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata2.00: configured for UDMA/133 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU10N A102 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Freeing unused kernel memory: 968k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1412k freed usb 2-1: new high speed USB device using ehci_hcd and address 2 Freeing unused kernel memory: 1744k freed [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.1: new high speed USB device using ehci_hcd and address 3 usb 1-1.1: New USB device found, idVendor=413c, idProduct=2513 usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1.1:1.0: USB hub found hub 1-1.1:1.0: 3 ports detected usb 1-1.2: new high speed USB device using ehci_hcd and address 4 kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with ordered data mode usb 1-1.2: New USB device found, idVendor=413c, idProduct=2513 usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1.2:1.0: USB hub found hub 1-1.2:1.0: 3 ports detected usb 1-1.4: new high speed USB device using ehci_hcd and address 5 usb 1-1.4: New USB device found, idVendor=05ca, idProduct=1814 usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.4: Product: Laptop_Integrated_Webcam_3M usb 1-1.4: Manufacturer: CN06YWTK7248704104J2 usb 2-1.7: new full speed USB device using ehci_hcd and address 3 usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187 usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.7: Product: DW375 Bluetooth Module usb 2-1.7: Manufacturer: Dell Computer Corp usb 2-1.7: SerialNumber: F07BCBA7291F usb 2-1.8: new full speed USB device using ehci_hcd and address 4 udev: starting version 145 usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800 usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.8: Product: 5880 usb 2-1.8: Manufacturer: Broadcom Corp usb 2-1.8: SerialNumber: 0123456789ABCD usb 2-1.8: config 0 descriptor?? ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20091214/evregion-475) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88011386dc20), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECBT] (Node ffff88011386dd00), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECG2] (Node ffff88011386ddc0), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECG6] (Node ffff88011386de80), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BST] (Node ffff88011386f480), AE_TIME ACPI Exception: AE_TIME, Evaluating _BST (20091214/battery-393) parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 ppdev: user-space parallel port driver [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 ACPI: WMI: Mapper loaded input: PC Speaker as /devices/platform/pcspkr/input/input8 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x7000-0x701f] conflicts with ACPI region SMBI [0x7000-0x700f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver iTCO_vendor_support: vendor-support=0 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: irq 30 for MSI/MSI-X yenta_cardbus 0000:03:00.0: CardBus bridge found [1028:040b] yenta_cardbus 0000:03:00.0: CardBus bridge to [bus 04-07] yenta_cardbus 0000:03:00.0: bridge window [io 0x2000-0x20ff] yenta_cardbus 0000:03:00.0: bridge window [io 0x2400-0x24ff] yenta_cardbus 0000:03:00.0: bridge window [mem 0xf0400000-0xf17fffff pref] yenta_cardbus 0000:03:00.0: bridge window [mem 0xf1800000-0xf1bfffff] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Linux video capture interface: v2.00 input: Dell WMI hotkeys as /devices/virtual/input/input9 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814) input: Laptop_Integrated_Webcam_3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb yenta_cardbus 0000:03:00.0: ISA IRQ mask 0x0000, PCI irq 18 yenta_cardbus 0000:03:00.0: Socket status: 30000006 pci_bus 0000:04: Upper limit for fixing this bridge's parent bridge: #04 yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x3fff yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf2cfffff dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33-kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:02:00.0: setting latency timer to 64 iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 6000 Series 3x3 AGN REV=0x74 iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 iwlagn 0000:02:00.0: irq 31 for MSI/MSI-X firewire_ohci 0000:03:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16 firewire_ohci 0000:03:00.4: setting latency timer to 64 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:ca:a4:52 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 2041ff-0ff alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 phy0: Selected rate control algorithm 'iwl-agn-rs' firewire_ohci: Added fw-ohci device 0000:03:00.4, OHCI version 1.0 sdhci-pci 0000:03:00.1: SDHCI controller found [1180:e822] (rev 3) sdhci-pci 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 mmc0: Unknown controller version (2). You may experience problems. sdhci-pci 0000:03:00.1: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0xa, fmic=0xf, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_sigmatel.c:2996: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 firewire_core: created device fw0: GUID 01d18661464fc000, S400 fuse init (API version 7.13) EXT3-fs (sda3): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with ordered data mode microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9 platform microcode: firmware: requesting intel-ucode/06-25-02 microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: Microcode Update Driver: v2.00 removed. [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 NET: Registered protocol family 10 lo: Disabled Privacy Extensions e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlagn 0000:02:00.0: firmware: requesting iwlwifi-6000-4.ucode iwlagn 0000:02:00.0: iwlwifi-6000-4.ucode firmware file req failed: -2 iwlagn 0000:02:00.0: Could not read microcode: -2 iwlagn 0000:02:00.0: firmware: requesting iwlwifi-6000-4.ucode iwlagn 0000:02:00.0: iwlwifi-6000-4.ucode firmware file req failed: -2 iwlagn 0000:02:00.0: Could not read microcode: -2 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880111b98300 connectors: ffff880113ad0e80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec9800 4 fb: ffff880111b98300 connectors: ffff880113ad0ea0 num_connectors: 0 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 [drm:ironlake_crtc_dpms], crtc 1 dpms off [drm:ironlake_crtc_dpms], crtc 1 is disabled [drm:drm_mode_getresources], Counted 2 8 8 [drm:drm_mode_getresources], Counted 2 8 8 [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 7: [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 40 92500 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [drm:drm_mode_getconnector], connector id 7: [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 7: [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 40 92500 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [drm:drm_mode_getconnector], connector id 7: [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff880111ec8800 3 fb: ffff880110a6f540 connectors: ffff88010e8c3980 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 7 crtc to ffff880111ec8800 [drm:intel_pipe_set_base], Writing base 02817000 00000000 0 0 [drm:intel_crtc_cursor_set], Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 7: [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 40 92500 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [drm:drm_mode_getconnector], connector id 7: [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 7: [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 40 92500 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [drm:drm_mode_getconnector], connector id 7: [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 5: [drm:drm_helper_probe_single_connector_modes], VGA-1 [drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018 [drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected [drm:drm_mode_getconnector], connector id 7: [drm:drm_helper_probe_single_connector_modes], DisplayPort-1 [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [drm:drm_helper_probe_single_connector_modes], Probed modes for DisplayPort-1 [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1080" 60 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 40 92500 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa [drm:drm_mode_getconnector], connector id 7: [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 10: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-1 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 12: [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 14: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-2 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 16: [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 [drm:drm_helper_probe_single_connector_modes], HDMI Type A-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 18: [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-3 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected [drm:drm_mode_getconnector], connector id 20: [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e [drm:drm_helper_probe_single_connector_modes], DisplayPort-4 is disconnected e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready virbr0: starting userspace STP failed, starting kernel STP