entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3304k freed agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 msgmni has been set to 2006 io scheduler noop registered io scheduler cfq registered (default) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: processor limited to max C-state 1 Real Time Clock Driver v1.12b Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19 nouveau 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BMP BIOS found [drm] nouveau 0000:01:00.0: BMP version 5.40 [drm] nouveau 0000:01:00.0: Bios version 04.36.20.21 [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04000302 00000000 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000303 [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF01D [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF4E1 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF723 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF896 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF8B3 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF8D0 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF959 [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM [TTM] Zone kernel: Available graphics memory: 513560 kiB. agpgart-amd64 0000:00:00.0: AGP 3.0 bridge agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a TV connector [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003ec84600 [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output C [drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output C [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B Console: switching to colour frame buffer device 160x64 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded sata_sil 0000:02:0c.0: version 2.4 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 sata_sil 0000:02:0c.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 sata_sil 0000:02:0c.0: Applying R_ERR on DMA activate FIS errata fix scsi0 : sata_sil scsi1 : sata_sil scsi2 : sata_sil scsi3 : sata_sil ata1: SATA max UDMA/100 mmio m1024@0xfeaedc00 tf 0xfeaedc80 irq 18 ata2: SATA max UDMA/100 mmio m1024@0xfeaedc00 tf 0xfeaedcc0 irq 18 ata3: SATA max UDMA/100 mmio m1024@0xfeaedc00 tf 0xfeaede80 irq 18 ata4: SATA max UDMA/100 mmio m1024@0xfeaedc00 tf 0xfeaedec0 irq 18 sata_nv 0000:00:0a.0: version 3.5 ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:0a.0: setting latency timer to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 22 ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 22 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATA-8: ST31000340AS, SD1A, max UDMA/133 ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sd 0:0:0:0: [sda] Attached SCSI disk sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/100 scsi 3:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD1A PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk sde1 sde2 sde3 sd 4:0:0:0: [sde] Attached SCSI disk ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sdf2 sdf3 sd 5:0:0:0: [sdf] Attached SCSI disk Freeing unused kernel memory: 328k freed md: md127 stopped. md: bind md: bind md: raid1 personality registered for level 1 raid1: raid set md127 active with 2 out of 2 mirrors md127: bitmap initialized from disk: read 1/1 pages, set 13 bits created bitmap (4 pages) for device md127 md127: detected capacity change from 0 to 497999405056 md127: unknown partition table EXT4-fs (md127): mounted filesystem with ordered data mode SysRq : Terminate All Tasks udev: starting version 154 loop: module loaded Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21 forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 21 (level, low) -> IRQ 21 forcedeth 0000:00:05.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:2f:34:ee:ff forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2 epic100.c:v1.11 1/7/2001 Written by Donald Becker (unofficial 2.4.x kernel port, version 2.1, Sept 11, 2006) epic100 0000:02:08.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 epic100 0000:02:08.0: MII transceiver #3 control 3000 status 7809. epic100 0000:02:08.0: Autonegotiation advertising 01e1 link partner 0001. eth1: SMSC EPIC/100 83c170 at 0xc800, IRQ 18, 00:e0:29:1c:d8:64 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:02.2: setting latency timer to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: cache line size of 32 is not supported ehci_hcd 0000:00:02.2: irq 20, io mem 0xfebffc00 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebfd000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:02.1: setting latency timer to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 21, io mem 0xfebfe000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 ohci1394 0000:02:09.2: PCI INT B -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[feaee800-feaeefff] Max Packet=[2048] IR/IT contexts=[4/8] pata_amd 0000:00:08.0: version 0.4.1 pata_amd 0000:00:08.0: power state changed by ACPI to D0 pata_amd 0000:00:08.0: power state changed by ACPI to D0 pata_amd 0000:00:08.0: setting latency timer to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33 ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc00000c0) ACPI=0x701f (60:600:0x13) ata7.00: configured for UDMA/33 scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5 usb 2-1: new low speed USB device using ohci_hcd and address 2 ata8.01: ATAPI: HL-DT-ST GCE-8481B, 1.10, max UDMA/33 ata8: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc00000c0) ACPI=0x701f (600:60:0x1c) ata8.01: configured for UDMA/33 scsi 7:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.10 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:0: Attached scsi generic sg4 type 0 sd 5:0:0:0: Attached scsi generic sg5 type 0 sr 6:0:0:0: Attached scsi generic sg6 type 5 sr 7:0:1:0: Attached scsi generic sg7 type 5 sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray sr 7:0:1:0: Attached scsi CD-ROM sr1 usbcore: registered new interface driver hiddev input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3 generic-usb 0003:045E:0040.0001: input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver raid6: int64x1 1777 MB/s raid6: int64x2 2179 MB/s raid6: int64x4 1792 MB/s raid6: int64x8 1445 MB/s usb 3-1: new low speed USB device using ohci_hcd and address 2 raid6: sse2x1 2523 MB/s raid6: sse2x2 3167 MB/s raid6: sse2x4 3425 MB/s raid6: using algorithm sse2x4 (3425 MB/s) xor: automatically using best checksumming function: generic_sse generic_sse: 6100.000 MB/sec xor: using function: generic_sse (6100.000 MB/sec) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 input: Unicomp Endura Keyboard as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input4 generic-usb 0003:17F6:0709.0002: input: USB HID v1.10 Keyboard [Unicomp Endura Keyboard ] on usb-0000:00:02.1-1/input0 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0031039602] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16 EMU10K1_Audigy 0000:02:09.0: PCI INT A -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16 Adding 1148640k swap on /dev/sde3. Priority:-1 extents:1 across:1148640k Bridge firewalling registered device eth0 entered promiscuous mode device eth1 entered promiscuous mode br0: port 2(eth1) entering forwarding state br0: port 1(eth0) entering forwarding state NET: Registered protocol family 10 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). it87: Found IT8712F chip at 0xd00, revision 7 it87: VID is disabled (pins used for GPIO) it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) eth1: no IPv6 routers present br0: no IPv6 routers present eth0: no IPv6 routers present md: md126 stopped. md: could not open unknown-block(8,33). md: md_import_device returned -6 md: bind md: bind md: bind md: bind md: kicking non-fresh sdc from array! md: unbind md: export_rdev(sdc) raid5: device sda1 operational as raid disk 0 raid5: device sdd1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 2 raid5: allocated 4270kB for md126 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md126 active with 3 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:3 disk 0, o:1, dev:sda1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sdd1 md126: bitmap initialized from disk: read 1/1 pages, set 1 bits created bitmap (11 pages) for device md126 md126: detected capacity change from 0 to 4500897202176 md126: unknown partition table md: md125 stopped. md: bind raid1: raid set md125 active with 1 out of 2 mirrors md125: detected capacity change from 0 to 1028145152 md125: unknown partition table sdc: sdc1 md: bind RAID5 conf printout: --- rd:4 wd:3 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sdd1 md: recovery of RAID array md126 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. md: using 128k window, over a total of 1465135808 blocks. md: md126: recovery done. RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sdd1 EXT4-fs (md126): mounted filesystem with ordered data mode nfsd: last server has exited, flushing export cache nfsd: last server has exited, flushing export cache [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B UDP: bad checksum. From 205.250.62.86:1027 to 192.168.1.10:15243 ulen 111 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 1 using output B [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)