Linux version 2.6.34-gentoo (root@turion64) (gcc version 4.3.4 (Gentoo 4.3.4 p1.1, pie-10.1.5) ) #1 SMP PREEMPT Sat May 22 00:36:31 BRT 2010 Command line: root=/dev/sda2 raid=noautodetect BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000087e70000 (usable) BIOS-e820: 0000000087e70000 - 0000000087e80000 (ACPI data) BIOS-e820: 0000000087e80000 - 0000000087f00000 (ACPI NVS) BIOS-e820: 0000000087f00000 - 0000000090000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x87e70 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E3FFF uncachable E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFF0000000 write-back 2 base 0088000000 mask FFF8000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f8530] f8530 init_memory_mapping: 0000000000000000-0000000087e70000 0000000000 - 0087e00000 page 2M 0087e00000 - 0087e70000 page 4k kernel direct mapping tables up to 87e70000 @ 8000-d000 ACPI: RSDP 00000000000f8500 00014 (v00 PTLTD ) ACPI: RSDT 0000000087e79539 00040 (v01 DELL M08 06040000 LTP 00000000) ACPI: FACP 0000000087e7fb58 00074 (v01 ATI Bowfin 06040000 ATI 000F4240) ACPI: DSDT 0000000087e79579 065DF (v01 ATI SB600 06040000 MSFT 03000000) ACPI: FACS 0000000087e90fc0 00040 ACPI: TCPA 0000000087e7fbcc 00032 (v02 AMD 06040000 PTEC 00000000) ACPI: SSDT 0000000087e7fbfe 001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001) ACPI: APIC 0000000087e7fdc2 00054 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: MCFG 0000000087e7fe16 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: HPET 0000000087e7fe52 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: SLIC 0000000087e7fe8a 00176 (v01 DELL M08 06040000 LTP 00000000) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000087e70000 Initmem setup node 0 0000000000000000-0000000087e70000 NODE_DATA [0000000001a5f1c0 - 0000000001a641bf] [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880002400000-ffff8800041fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009d 0: 0x00000100 -> 0x00087e70 On node 0 totalpages: 556556 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3940 pages, LIFO batch:0 DMA32 zone: 7555 pages used for memmap DMA32 zone: 545005 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x43538310 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 early_res array is doubled to 64 at [7000 - 77ff] Allocating PCI resources starting at 90000000 (gap: 90000000:50000000) setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880001c00000 s81896 r8192 d20504 u1048576 pcpu-alloc: s81896 r8192 d20504 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 548945 Policy zone: DMA32 Kernel command line: root=/dev/sda2 raid=noautodetect PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ c36a000000 size 32 MB Aperture beyond 4GB. Ignoring. Subtract (46 early reservations) #1 [0001000000 - 0001a5e084] TEXT DATA BSS #2 [0001a5f000 - 0001a5f18c] BRK #3 [00000f8540 - 0000100000] BIOS reserved #4 [00000f8530 - 00000f8540] MP-table mpf #5 [000009dc00 - 000009e171] BIOS reserved #6 [000009e2cd - 00000f8530] BIOS reserved #7 [000009e171 - 000009e2cd] MP-table mpc #8 [0000001000 - 0000003000] TRAMPOLINE #9 [0000003000 - 0000007000] ACPI WAKEUP #10 [0000008000 - 000000b000] PGTABLE #11 [0001a5f1c0 - 0001a641c0] NODE_DATA #12 [0001a641c0 - 0001a651c0] BOOTMEM #13 [0001a5e0c0 - 0001a5e258] BOOTMEM #14 [0002266000 - 0002267000] BOOTMEM #15 [0002267000 - 0002268000] BOOTMEM #16 [0002400000 - 0004200000] MEMMAP 0 #17 [0001a5e280 - 0001a5e400] BOOTMEM #18 [0001a651c0 - 0001a7d1c0] BOOTMEM #19 [0001a7e000 - 0001a7f000] BOOTMEM #20 [0001a5e400 - 0001a5e441] BOOTMEM #21 [0001a5e480 - 0001a5e4c3] BOOTMEM #22 [0001a5e500 - 0001a5e7a0] BOOTMEM #23 [0001a5e7c0 - 0001a5e828] BOOTMEM #24 [0001a5e840 - 0001a5e8a8] BOOTMEM #25 [0001a5e8c0 - 0001a5e928] BOOTMEM #26 [0001a5e940 - 0001a5e9a8] BOOTMEM #27 [0001a5e9c0 - 0001a5ea28] BOOTMEM #28 [0001a5ea40 - 0001a5eaa8] BOOTMEM #29 [0001a5eac0 - 0001a5eb28] BOOTMEM #30 [0001a5eb40 - 0001a5eba8] BOOTMEM #31 [0001a5ebc0 - 0001a5ec28] BOOTMEM #32 [0001a5ec40 - 0001a5eca8] BOOTMEM #33 [0001a5ecc0 - 0001a5ed28] BOOTMEM #34 [0001a5ed40 - 0001a5ed61] BOOTMEM #35 [0001a5ed80 - 0001a5eda1] BOOTMEM #36 [0001c00000 - 0001c1b000] BOOTMEM #37 [0001d00000 - 0001d1b000] BOOTMEM #38 [0001a5edc0 - 0001a5edc8] BOOTMEM #39 [0001a5ee00 - 0001a5ee08] BOOTMEM #40 [0001a5ee40 - 0001a5ee48] BOOTMEM #41 [0001a5ee80 - 0001a5ee90] BOOTMEM #42 [0001a5eec0 - 0001a5f000] BOOTMEM #43 [0001a7d1c0 - 0001a7d220] BOOTMEM #44 [0001a7d240 - 0001a7d2a0] BOOTMEM #45 [0001a7f000 - 0001a87000] BOOTMEM Memory: 2184464k/2226624k available (5574k kernel code, 400k absent, 41760k reserved, 3442k data, 608k init) Hierarchical RCU implementation. NR_IRQS:1280 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1795.603 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.20 BogoMIPS (lpj=7182412) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 tseg: 0087f00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100121 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 0) ... ....... works. CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02 System has AMD C1E enabled Switch to broadcast mode on CPU0 Booting Node 0, Processors #1 Ok. Switch to broadcast mode on CPU1 Brought up 2 CPUs Total of 2 processors activated (7182.21 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 5353.000 MB/sec xor: using function: generic_sse (5353.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 0000000090000000 aka 2304M node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [c8000000, cfffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [90000000, c7ffffff] bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x90000000-0xefffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI Error: Needed type [Reference], found [Device] ffff880087761290 (20100121/exresop-104) ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20100121/dswexec-445) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88008776c3f0), AE_AML_OPERAND_TYPE ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xffffffff] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:12.0: reg 10: [io 0x8438-0x843f] pci 0000:00:12.0: reg 14: [io 0x8454-0x8457] pci 0000:00:12.0: reg 18: [io 0x8430-0x8437] pci 0000:00:12.0: reg 1c: [io 0x8450-0x8453] pci 0000:00:12.0: reg 20: [io 0x8400-0x840f] pci 0000:00:12.0: reg 24: [mem 0xc0004000-0xc00043ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: reg 10: [mem 0xc0005000-0xc0005fff] pci 0000:00:13.1: reg 10: [mem 0xc0006000-0xc0006fff] pci 0000:00:13.2: reg 10: [mem 0xc0007000-0xc0007fff] pci 0000:00:13.3: reg 10: [mem 0xc0008000-0xc0008fff] pci 0000:00:13.4: reg 10: [mem 0xc0009000-0xc0009fff] pci 0000:00:13.5: reg 10: [mem 0xc0004400-0xc00044ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: reg 10: [io 0x8410-0x841f] pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x8420-0x842f] pci 0000:00:14.2: reg 10: [mem 0xc0000000-0xc0003fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff] pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 02-04] pci 0000:00:05.0: bridge window [io 0x0000-0x0000] (disabled) pci 0000:00:05.0: bridge window [mem 0x00000000-0x000fffff] (disabled) pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:05:00.0: reg 10: [mem 0xc0200000-0xc0203fff] pci 0000:05:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 05-07] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:06.0: bridge window [mem 0xc0200000-0xc02fffff] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:08:00.0: reg 10: [mem 0xc0300000-0xc0301fff] pci 0000:08:00.0: supports D1 D2 pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:08:01.0: reg 10: [mem 0xc0302800-0xc03028ff] pci 0000:08:01.0: supports D1 D2 pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:01.0: PME# disabled pci 0000:08:01.1: reg 10: [mem 0xc0302c00-0xc0302cff] pci 0000:08:01.1: supports D1 D2 pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:01.1: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 08-0a] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xc0300000-0xc03fffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x90000000-0xefffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfcffffffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI Error: Needed type [Reference], found [Device] ffff880087761290 (20100121/exresop-104) ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20100121/dswexec-445) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88008776c3f0), AE_AML_OPERAND_TYPE ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 1452 MB/s raid6: int64x2 2076 MB/s raid6: int64x4 1809 MB/s raid6: int64x8 1495 MB/s raid6: sse2x1 2487 MB/s raid6: sse2x2 3344 MB/s raid6: sse2x4 3458 MB/s raid6: using algorithm sse2x4 (3458 MB/s) Advanced Linux Sound Architecture Driver Version 1.0.22.1. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009dc00 - 000000000009ffff reserve RAM buffer: 0000000087e70000 - 0000000087ffffff cfg80211: Calling CRDA to update world regulatory domain hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: [io 0x1080] has been reserved system 00:08: [io 0x0220-0x022f] has been reserved system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0530-0x0537] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cd3] has been reserved system 00:08: [io 0x0cd4-0x0cd5] has been reserved system 00:08: [io 0x0cd6-0x0cd7] has been reserved system 00:08: [io 0x0cd8-0x0cdf] has been reserved system 00:08: [io 0x8000-0x805f] has been reserved system 00:08: [io 0x8100-0x81ff window] has been reserved system 00:08: [io 0x8200-0x82ff window] has been reserved system 00:08: [io 0x0f40-0x0f47] has been reserved system 00:08: [io 0x087f] has been reserved system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] could not be reserved system 00:09: [mem 0xc0004800-0xc0004bff] has been reserved system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 b43-pci-bridge 0000:05:00.0: setting latency timer to 64 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 pci 0000:00:05.0: BAR 8: assigned [mem 0x90000000-0x901fffff] pci 0000:00:05.0: BAR 9: assigned [mem 0x90200000-0x903fffff 64bit pref] pci 0000:00:06.0: BAR 9: assigned [mem 0x90400000-0x905fffff 64bit pref] pci 0000:00:05.0: BAR 7: assigned [io 0x2000-0x2fff] pci 0000:00:06.0: BAR 7: assigned [io 0x3000-0x3fff] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 02-04] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] pci 0000:00:05.0: bridge window [mem 0x90000000-0x901fffff] pci 0000:00:05.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 05-07] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff] pci 0000:00:06.0: bridge window [mem 0xc0200000-0xc02fffff] pci 0000:00:06.0: bridge window [mem 0x90400000-0x905fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 08-0a] pci 0000:00:14.4: bridge window [io disabled] pci 0000:00:14.4: bridge window [mem 0xc0300000-0xc03fffff] pci 0000:00:14.4: bridge window [mem pref disabled] pci 0000:00:05.0: enabling device (0000 -> 0003) pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x90000000-0xefffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfcffffffff] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0x90000000-0x901fffff] pci_bus 0000:02: resource 2 [mem 0x90200000-0x903fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0xc0200000-0xc02fffff] pci_bus 0000:05: resource 2 [mem 0x90400000-0x905fffff 64bit pref] pci_bus 0000:08: resource 1 [mem 0xc0300000-0xc03fffff] pci_bus 0000:08: resource 4 [io 0x0000-0xffff] pci_bus 0000:08: resource 5 [mem 0x90000000-0xefffffff] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:08: resource 7 [mem 0xf0000000-0xfcffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: MSI quirk detected; MSI disabled pci 0000:01:05.0: Boot video device PCI: CLS 32 bytes, default 64 HugeTLB registered 2 MB page size, pre-allocated 0 pages JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. Allocated 268072 bytes for deflate workspace Allocated 42312 bytes for inflate workspace Registering JFFS2 compressor "zlib" Registering JFFS2 compressor "rtime" Registering JFFS2 compressor "lzo" JFFS2: default compression mode: priority msgmni has been set to 4266 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:05.0: setting latency timer to 64 pcieport 0000:00:06.0: setting latency timer to 64 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 ACPI: AC Adapter [ACAD] (off-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (43 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8420-0x8427 Probing IDE interface ide0... hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive ACPI: Battery Slot [BAT1] (battery present) hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22 SSFDC read-only Flash Translation layer b44 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0 b44: b44.c:v2.0 b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:4c:55:63 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000 ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.1.1 loaded device-mapper: multipath round-robin: version 1.0.0 loaded cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ALSA device list: #0: HDA ATI SB at 0xc0000000 irq 16 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 17 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x15 powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e rtc_cmos 00:04: setting system clock to 2010-05-22 16:46:50 UTC (1274546810) ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC74P, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000/0x0 sda1 sda2 sda3 < input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 sda5 sda6 > sda4 sd 0:0:0:0: [sda] Attached SCSI disk md: Skipping autodetection of RAID arrays. (raid=autodetect will force) REISERFS (device sda2): found reiserfs format "3.6" with standard journal REISERFS (device sda2): using ordered data mode REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda2): checking transaction log (sda2) REISERFS debug (device sda2): journal-1153: found in header: first_unflushed_offset 1378, last_flushed_trans_id 3029626 REISERFS debug (device sda2): journal-1206: Starting replay from offset 1378, trans_id 3029627 REISERFS debug (device sda2): journal-1299: Setting newest_mount_id to 997 Clocksource tsc unstable (delta = -276184819 ns) REISERFS (device sda2): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:2. Freeing unused kernel memory: 608k freed udev: starting version 149 [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function acpi device:1c: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) b43-phy0: Broadcom 4311 WLAN found (core revision 10) b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 phy0: Selected rate control algorithm 'minstrel' Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: power state changed by ACPI to D0 radeon 0000:01:05.0: power state changed by ACPI to D0 radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [drm] initializing kernel modesetting (RS480 0x1002:0x5975). [drm] register mmio base: 0xC0100000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] 2 Power State(s) [drm] State 0 Battery [drm] 1 Clock Mode(s) [drm] 0 engine: 100000 [drm] State 1 Default (default) [drm] 1 Clock Mode(s) [drm] 0 engine: 400000 [drm] radeon: power management initialized [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?) [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:05.0: VRAM: 128M 0x88000000 - 0x8FFFFFFF (128M used) radeon 0000:01:05.0: GTT: 32M 0x86000000 - 0x87FFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 1092536 kiB. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 32M of GTT memory ready. [drm] GART: num cpu pages 8192, num gpu pages 8192 [drm] radeon: 2 quad pipes, 1 z pipes initialized. [drm] radeon: cp idle (0x10000C03) [drm] Loading R300 Microcode platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [drm] radeon: ring at 0x0000000086000000 [drm] ring test succeeded in 0 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Panel ID String: AUO [drm] Panel Size 1280x800 [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [drm] Encoders: [drm] CRT1: INTERNAL_DAC2 [drm] Connector 1: [drm] LVDS [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [drm] Encoders: [drm] LCD1: INTERNAL_LVDS composite sync not supported [drm] fb mappable at 0xC8040000 [drm] vram apper at 0xC8000000 [drm] size 4096000 [drm] fb depth is 24 [drm] pitch is 5120 Console: switching to colour frame buffer device 160x50 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.3.0 20080528 for 0000:01:05.0 on minor 0 fuse init (API version 7.13) REISERFS (device sda4): found reiserfs format "3.6" with standard journal REISERFS warning (device sda4): reiserfs_fill_super: CONFIG_REISERFS_CHECK is set ON REISERFS warning (device sda4): reiserfs_fill_super: - it is slow mode for debugging. REISERFS (device sda4): using ordered data mode REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda4): checking transaction log (sda4) REISERFS debug (device sda4): journal-1153: found in header: first_unflushed_offset 5680, last_flushed_trans_id 1013191 REISERFS debug (device sda4): journal-1206: Starting replay from offset 5680, trans_id 1013192 REISERFS debug (device sda4): journal-1299: Setting newest_mount_id to 316 REISERFS (device sda4): Using r5 hash to sort names Adding 1004056k swap on /dev/sda5. Priority:-1 extents:1 across:1004056k b44 ssb1:0: eth0: Link is up at 100 Mbps, full duplex b44 ssb1:0: eth0: Flow control is off for TX and off for RX b43 ssb0:0: firmware: requesting b43/ucode5.fw b43 ssb0:0: firmware: requesting b43/pcm5.fw b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) b43-phy0 debug: Chip initialized b43-phy0 debug: 32-bit DMA initialized b43-phy0 debug: QoS enabled b43-phy0 debug: Wireless interface started b43-phy0 debug: Adding Interface type 2 b43-phy0: Radio hardware status changed to DISABLED b43-phy0: Radio turned on by software b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on. b43-phy0 debug: Removing Interface type 2 b43-phy0 debug: Wireless interface stopped b43-phy0 debug: DMA-32 rx_ring: Used slots 0/64, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_BK: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_BE: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_VI: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_VO: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_mcast: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 composite sync not supported composite sync not supported NET: Registered protocol family 10 eth0: no IPv6 routers present composite sync not supported pidgin[5712] trap divide error ip:7f1de34281cc sp:7fffb64cd970 error:0 in libglib-2.0.so.0.2200.5[7f1de33fb000+e1000] atkbd serio0: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). atkbd serio0: Use 'setkeycodes e06e ' to make it known. atkbd serio0: Unknown key released (translated set 2, code 0xee on isa0060/serio0). atkbd serio0: Use 'setkeycodes e06e ' to make it known. CE: hpet increased min_delta_ns to 7500 nsec