Linux version 2.6.34 (magnus@working) (gcc version 4.4.3 (GCC) ) #1 SMP Sun May 23 10:34:29 CEST 2010 Command line: BOOT_IMAGE=Linux-testing ro root=803 vt.default_utf8=0 noirqdebug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) AGP bridge at 00:00:00 Aperture from AGP @ f0000000 old size 32 MB Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) last_pfn = 0xcffb0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000ff780] ff780 init_memory_mapping: 0000000000000000-00000000cffb0000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cffb0000 page 4k kernel direct mapping tables up to cffb0000 @ 16000-1c000 ACPI: RSDP 00000000000f8860 00014 (v00 ACPIAM) ACPI: RSDT 00000000cffb0000 00040 (v01 A_M_I OEMRSDT 09000930 MSFT 00000097) ACPI: FACP 00000000cffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097) ACPI: DSDT 00000000cffb0450 04B66 (v01 4CDS2 4CDS2220 00000220 INTL 02002026) ACPI: FACS 00000000cffc0000 00040 ACPI: APIC 00000000cffb0390 00078 (v01 A_M_I OEMAPIC 09000930 MSFT 00000097) ACPI: MCFG 00000000cffb0410 0003C (v01 A_M_I OEMMCFG 09000930 MSFT 00000097) ACPI: OEMB 00000000cffc0040 00051 (v01 A_M_I AMI_OEM 09000930 MSFT 00000097) ACPI: AAFT 00000000cffb4fc0 00027 (v01 A_M_I OEMAAFT 09000930 MSFT 00000097) ACPI: HPET 00000000cffb4ff0 00038 (v01 A_M_I VT-8237S 09000930 MSFT 00000097) ACPI: SSDT 00000000cffc09c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff880002400000-ffff8800051fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cffb0 On node 0 totalpages: 851775 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 DMA32 zone: 11591 pages used for memmap DMA32 zone: 836201 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x11068201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 48 early_res array is doubled to 64 at [1a1a0 - 1a99f] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880001c00000 s81448 r8192 d20952 u524288 pcpu-alloc: s81448 r8192 d20952 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 840128 Kernel command line: BOOT_IMAGE=Linux-testing ro root=803 vt.default_utf8=0 noirqdebug IRQ lockup detection disabled PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... AGP bridge at 00:00:00 Aperture from AGP @ f0000000 old size 32 MB Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) Subtract (49 early reservations) #1 [0001000000 - 0001a10284] TEXT DATA BSS #2 [0001a11000 - 0001a11137] BRK #3 [00000ff790 - 0000100000] BIOS reserved #4 [00000ff780 - 00000ff790] MP-table mpf #5 [000009f400 - 00000fc550] BIOS reserved #6 [00000fc69c - 00000ff780] BIOS reserved #7 [00000fc550 - 00000fc69c] MP-table mpc #8 [0000010000 - 0000012000] TRAMPOLINE #9 [0000012000 - 0000016000] ACPI WAKEUP #10 [0000016000 - 000001a000] PGTABLE #11 [0001a11140 - 0001a12140] BOOTMEM #12 [000001a000 - 000001a1a0] BOOTMEM #13 [0002213000 - 0002214000] BOOTMEM #14 [0002214000 - 0002215000] BOOTMEM #15 [0002400000 - 0005200000] MEMMAP 0 #16 [0001a12140 - 0001a2a140] BOOTMEM #17 [0001a2a140 - 0001a42140] BOOTMEM #18 [0001a43000 - 0001a44000] BOOTMEM #19 [0001a102c0 - 0001a10301] BOOTMEM #20 [0001a10340 - 0001a103c6] BOOTMEM #21 [0001a10400 - 0001a10668] BOOTMEM #22 [0001a10680 - 0001a106e8] BOOTMEM #23 [0001a10700 - 0001a10768] BOOTMEM #24 [0001a10780 - 0001a107e8] BOOTMEM #25 [0001a10800 - 0001a10868] BOOTMEM #26 [0001a10880 - 0001a108e8] BOOTMEM #27 [0001a10900 - 0001a10968] BOOTMEM #28 [0001a10980 - 0001a109e8] BOOTMEM #29 [0001a10a00 - 0001a10a68] BOOTMEM #30 [0001a10a80 - 0001a10ae8] BOOTMEM #31 [0001a10b00 - 0001a10b68] BOOTMEM #32 [0001a10b80 - 0001a10ba0] BOOTMEM #33 [0001a10bc0 - 0001a10c02] BOOTMEM #34 [0001a10c40 - 0001a10c82] BOOTMEM #35 [0001c00000 - 0001c1b000] BOOTMEM #36 [0001c80000 - 0001c9b000] BOOTMEM #37 [0001d00000 - 0001d1b000] BOOTMEM #38 [0001d80000 - 0001d9b000] BOOTMEM #39 [0001a10cc0 - 0001a10cc8] BOOTMEM #40 [0001a10d00 - 0001a10d08] BOOTMEM #41 [0001a10d40 - 0001a10d50] BOOTMEM #42 [0001a10d80 - 0001a10da0] BOOTMEM #43 [0001a10dc0 - 0001a10ef0] BOOTMEM #44 [0001a10f00 - 0001a10f50] BOOTMEM #45 [0001a10f80 - 0001a10fd0] BOOTMEM #46 [0001a44000 - 0001a4c000] BOOTMEM #47 [0001d9b000 - 000219b000] BOOTMEM #48 [0005200000 - 0005400000] BOOTMEM Memory: 3342824k/3407552k available (4989k kernel code, 452k absent, 64276k reserved, 3936k data, 596k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2892.241 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5784.48 BogoMIPS (lpj=2892241) Security Framework initialized Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100121 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 18953 entries in 75 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz stepping 0d Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (11568.71 BogoMIPS). devtmpfs: initialized xor: automatically using best checksumming function: generic_sse generic_sse: 10572.000 MB/sec xor: using function: generic_sse (10572.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 00000000cffc00a0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: SSDT 00000000cffc0530 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xff77ffff] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:00:01.0: supports D1 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:0f.0: reg 10: [io 0xcc00-0xcc07] pci 0000:00:0f.0: reg 14: [io 0xc880-0xc883] pci 0000:00:0f.0: reg 18: [io 0xc800-0xc807] pci 0000:00:0f.0: reg 1c: [io 0xc480-0xc483] pci 0000:00:0f.0: reg 20: [io 0xc400-0xc40f] pci 0000:00:0f.0: reg 24: [io 0xc000-0xc0ff] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] pci 0000:00:10.0: reg 20: [io 0xb480-0xb49f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20: [io 0xb800-0xb81f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20: [io 0xb880-0xb89f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20: [io 0xbc00-0xbc1f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10: [mem 0xfeafbc00-0xfeafbcff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled pci 0000:00:12.0: reg 10: [io 0xb000-0xb0ff] pci 0000:00:12.0: reg 14: [mem 0xfeafb800-0xfeafb8ff] pci 0000:00:12.0: supports D1 D2 pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:00.0: reg 14: [io 0xd000-0xd0ff] pci 0000:01:00.0: reg 18: [mem 0xfebe0000-0xfebeffff] pci 0000:01:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xfebfc000-0xfebfffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: PCI bridge to [bus 02-02] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff pref] pci 0000:03:06.0: reg 10: [io 0xec00-0xec1f] pci 0000:03:06.0: supports D1 D2 pci 0000:00:13.1: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:13.1: bridge window [io 0xe000-0xefff] pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:13.1: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:13.1: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:13.1: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:13.1: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:13.1: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) pci 0000:00:13.1: bridge window [mem 0xf0000000-0xff77ffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 2281 MB/s raid6: int64x2 2898 MB/s raid6: int64x4 2187 MB/s raid6: int64x8 1921 MB/s raid6: sse2x1 4820 MB/s raid6: sse2x2 5195 MB/s raid6: sse2x4 8648 MB/s raid6: using algorithm sse2x4 (8648 MB/s) PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Expanded resource reserved due to conflict with PCI Bus 0000:00 reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:05: [io 0x0295-0x0296] has been reserved system 00:05: [io 0x03e0-0x03e7] has been reserved system 00:05: [io 0x04d0-0x04d1] has been reserved system 00:05: [io 0x0800-0x087f] has been reserved system 00:05: [io 0x0400-0x041f] has been reserved system 00:05: [mem 0xfecc0000-0xfecc0fff] could not be reserved system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved system 00:0c: [mem 0xff780000-0xffffffff] has been reserved pci 0000:00:02.0: BAR 8: assigned [mem 0xf8000000-0xf83fffff] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: PCI bridge to [bus 02-02] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf83fffff] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff pref] pci 0000:00:13.1: PCI bridge to [bus 03-03] pci 0000:00:13.1: bridge window [io 0xe000-0xefff] pci 0000:00:13.1: bridge window [mem disabled] pci 0000:00:13.1: bridge window [mem pref disabled] pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: enabling device (0106 -> 0107) pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:13.1: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xff77ffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf83fffff] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xff77ffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: disabling DAC on VIA PCI bridge PCI: CLS mismatch (32 != 64), using 64 bytes pci 0000:01:00.0: Boot video device Intel AES-NI instructions are not detected. audit: initializing netlink socket (disabled) type=2000 audit(1274709558.304:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 6528 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 pcieport 0000:00:02.0: irq 48 for MSI/MSI-X aer 0000:00:02.0:pcie02: service driver aer loaded pcieport 0000:00:02.0: Requesting control of PCIe PME from ACPI BIOS pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A floppy0: no floppy controllers found brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. sata_via 0000:00:0f.0: version 2.6 sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:00:0f.0: routed to hard irq line 5 scsi0 : sata_via scsi1 : sata_via ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 pata_via 0000:00:0f.1: version 0.3.4 scsi2 : pata_via scsi3 : pata_via ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata3.00: ATAPI: DVDRW IDE 16X, VER A089, max UDMA/66 ata3.01: ATA-7: SAMSUNG SP0802N, TK200-04, max UDMA/133 ata3.01: 156368016 sectors, multi 16: LBA48 ata3.00: configured for UDMA/66 ata3.01: configured for UDMA/133 ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) scsi 2:0:0:0: CD-ROM DVDRW IDE 16X A089 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP0802N TK20 PQ: 0 ANSI: 5 sd 2:0:1:0: [sdb] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 2:0:1:0: [sdb] Attached SCSI disk ata4.00: ATAPI: _NEC DVD_RW ND-1300A, 1.0C, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM _NEC DVD_RW ND-1300A 1.0C PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray sr 3:0:0:0: Attached scsi CD-ROM sr1 registered taskstats version 1 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240) EXT4-fs (sda3): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:3. devtmpfs: mounted Freeing unused kernel memory: 596k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 1136k freed Freeing unused kernel memory: 412k freed udev: starting version 153 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 2:0:0:0: Attached scsi generic sg1 type 5 sd 2:0:1:0: Attached scsi generic sg2 type 0 sr 3:0:0:0: Attached scsi generic sg3 type 5 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xfeafbc00 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.34 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.34 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.34 uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Linux agpgart interface v0.103 via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 eth0: VIA Rhine II at 0xfeafb800, 00:19:66:db:47:75, IRQ 23. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. CA0106 0000:03:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 parport_pc 00:04: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] agpgart: Detected VIA PT880 Ultra chipset ppdev: user-space parallel port driver agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: New USB device found, idVendor=15d9, idProduct=0a4d usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 2-2: Product: USB OPTICAL MOUSE HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: PCI: Disallowing DAC for device usbcore: registered new interface driver hiddev input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4 generic-usb 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:10.0-2/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver Adding 1413716k swap on /dev/sda2. Priority:-1 extents:1 across:1413716k fuse init (API version 7.13) lp0: using parport0 (interrupt-driven). lp0: console ready EXT4-fs (sda4): mounted filesystem with ordered data mode