Linux version 2.6.34-gentoo-nyx (root@nyx) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #5 SMP PREEMPT Thu Jun 3 20:39:52 CEST 2010 Command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffd0000 (usable) BIOS-e820: 00000000cffd0000 - 00000000cffde000 (ACPI data) BIOS-e820: 00000000cffde000 - 00000000d0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFF0000000 write-back 3 base 0100000000 mask FFE0000000 write-back 4 base 0120000000 mask FFF0000000 write-back 5 base 00000DC000 mask 0FFFFFE000 write-back 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 mtrr: your BIOS has configured an incorrect mask, fixing it. e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcffd0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cffd0000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cffd0000 page 4k kernel direct mapping tables up to cffd0000 @ 16000-1c000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 1a000-20000 ACPI: RSDP 00000000000f91a0 00014 (v00 ACPIAM) ACPI: RSDT 00000000cffd0000 00038 (v01 A M I OEMRSDT 10000722 MSFT 00000097) ACPI: FACP 00000000cffd0200 00084 (v02 A M I OEMFACP 10000722 MSFT 00000097) ACPI: DSDT 00000000cffd0440 04512 (v01 1ADJT 1ADJT007 00000007 INTL 20051117) ACPI: FACS 00000000cffde000 00040 ACPI: APIC 00000000cffd0390 00070 (v01 A M I OEMAPIC 10000722 MSFT 00000097) ACPI: MCFG 00000000cffd0400 0003C (v01 A M I OEMMCFG 10000722 MSFT 00000097) ACPI: OEMB 00000000cffde040 00060 (v01 A M I AMI_OEM 10000722 MSFT 00000097) ACPI: SSDT 00000000cffd4960 0030E (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cffd0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048415 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833544 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 early_res array is doubled to 64 at [1b000 - 1b7ff] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u1048576 pcpu-alloc: s75176 r8192 d23128 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031391 Kernel command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Subtract (48 early reservations) #1 [0001000000 - 000161c4c4] TEXT DATA BSS #2 [000009fc00 - 0000100000] BIOS reserved #3 [000161d000 - 000161d180] BRK #4 [0000010000 - 0000012000] TRAMPOLINE #5 [0000012000 - 0000016000] ACPI WAKEUP #6 [0000016000 - 000001a000] PGTABLE #7 [000001a000 - 000001b000] PGTABLE #8 [000161d180 - 000161e180] BOOTMEM #9 [000161c500 - 000161c700] BOOTMEM #10 [0001e1f000 - 0001e20000] BOOTMEM #11 [0001e20000 - 0001e21000] BOOTMEM #12 [0002000000 - 0005a00000] MEMMAP 0 #13 [000161c700 - 000161c880] BOOTMEM #14 [000161e180 - 0001636180] BOOTMEM #15 [0001636180 - 000163c180] BOOTMEM #16 [000163d000 - 000163e000] BOOTMEM #17 [000161c880 - 000161c8c3] BOOTMEM #18 [000161c900 - 000161cb68] BOOTMEM #19 [000161cb80 - 000161cbe8] BOOTMEM #20 [000161cc00 - 000161cc68] BOOTMEM #21 [000161cc80 - 000161cce8] BOOTMEM #22 [000161cd00 - 000161cd68] BOOTMEM #23 [000161cd80 - 000161cde8] BOOTMEM #24 [000161ce00 - 000161ce68] BOOTMEM #25 [000161ce80 - 000161cee8] BOOTMEM #26 [000161cf00 - 000161cf68] BOOTMEM #27 [000161cf80 - 000161cfe8] BOOTMEM #28 [000163c180 - 000163c1e8] BOOTMEM #29 [000163c200 - 000163c238] BOOTMEM #30 [000163c240 - 000163c278] BOOTMEM #31 [0001800000 - 000181a000] BOOTMEM #32 [0001900000 - 000191a000] BOOTMEM #33 [000163c280 - 000163c288] BOOTMEM #34 [000163c2c0 - 000163c2c8] BOOTMEM #35 [000163c300 - 000163c308] BOOTMEM #36 [000163c340 - 000163c350] BOOTMEM #37 [000163c380 - 000163c4c0] BOOTMEM #38 [000163c4c0 - 000163c520] BOOTMEM #39 [000163c540 - 000163c5a0] BOOTMEM #40 [000163e000 - 0001646000] BOOTMEM #41 [000191a000 - 0001d1a000] BOOTMEM #42 [0005a00000 - 0005c00000] BOOTMEM #43 [0020000000 - 0024000000] BOOTMEM #44 [0005c00000 - 0009c00000] BOOTMEM #45 [0001646000 - 0001666000] BOOTMEM #46 [0001666000 - 00016a6000] BOOTMEM #47 [000001b800 - 0000023800] BOOTMEM Memory: 3989948k/4980736k available (3631k kernel code, 787076k absent, 203712k reserved, 1701k data, 420k init) Hierarchical RCU implementation. NR_IRQS:320 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 3015.921 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.84 BogoMIPS (lpj=3015921) Security Framework initialized Mount-cache hash table entries: 256 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100121 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 Booting Node 0, Processors #1 Ok. Brought up 2 CPUs Total of 2 processors activated (12061.68 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000d0000000 aka 3328M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f9ff0000, f9ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, fe0bffff] TOM2: 0000000130000000 aka 4864M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xd0000000-0xffffffff] bus: 00 index 2 [mem 0xf9ff0000-0xf9ffffff] bus: 00 index 3 [mem 0x000a0000-0x000bffff] bus: 00 index 4 [mem 0x130000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI Warning: Incorrect checksum in table [OEMB] - E9, should be E8 (20100121/tbutils-314) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xff77ffff] (ignored) pci 0000:00:01.0: Force enabled HPET at 0xfed00000 pci 0000:00:01.1: reg 10: [io 0xcc00-0xcc1f] pci 0000:00:01.1: reg 20: [io 0x5000-0x503f] pci 0000:00:01.1: reg 24: [io 0x6000-0x603f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10: [mem 0xf9fff000-0xf9ffffff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0xf9ffec00-0xf9ffecff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf] pci 0000:00:07.0: reg 10: [io 0xc480-0xc487] pci 0000:00:07.0: reg 14: [io 0xc400-0xc403] pci 0000:00:07.0: reg 18: [io 0xc080-0xc087] pci 0000:00:07.0: reg 1c: [io 0xc000-0xc003] pci 0000:00:07.0: reg 20: [io 0xbc00-0xbc0f] pci 0000:00:07.0: reg 24: [mem 0xf9ffd000-0xf9ffdfff] pci 0000:00:0a.0: reg 10: [mem 0xf9ffc000-0xf9ffcfff] pci 0000:00:0a.0: reg 14: [io 0xb880-0xb887] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:09.0: reg 10: [io 0xdc00-0xdc1f] pci 0000:01:09.0: supports D1 D2 pci 0000:01:09.1: reg 10: [io 0xd880-0xd887] pci 0000:01:09.1: supports D1 D2 pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xf9ff0000-0xf9ffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x130000000-0xfcffffffff] (subtractive decode) pci 0000:00:0b.0: PCI bridge to [bus 02-02] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0d.0: PCI bridge to [bus 04-04] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:05:00.0: reg 10: [mem 0xfd000000-0xfdffffff] pci 0000:05:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:05:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] pci 0000:05:00.0: reg 24: [io 0xec00-0xec7f] pci 0000:05:00.0: reg 30: [mem 0xfeb80000-0xfebfffff pref] pci 0000:00:0e.0: PCI bridge to [bus 05-05] pci 0000:00:0e.0: bridge window [io 0xe000-0xefff] pci 0000:00:0e.0: bridge window [mem 0xfa000000-0xfebfffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *6 ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *3 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. Advanced Linux Sound Architecture Driver Version 1.0.22.1. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:02.0: address space collision: [mem 0xf9fff000-0xf9ffffff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff] pci 0000:00:02.1: address space collision: [mem 0xf9ffec00-0xf9ffecff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff] pci 0000:00:07.0: address space collision: [mem 0xf9ffd000-0xf9ffdfff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff] pci 0000:00:0a.0: address space collision: [mem 0xf9ffc000-0xf9ffcfff] conflicts with PCI Bus #00 [mem 0xf9ff0000-0xf9ffffff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000cffd0000 - 00000000cfffffff hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:06: [io 0x04d0-0x04d1] has been reserved system 00:06: [io 0x0800-0x080f] has been reserved system 00:06: [io 0x4000-0x407f] has been reserved system 00:06: [io 0x4080-0x40ff] has been reserved system 00:06: [io 0x4400-0x447f] has been reserved system 00:06: [io 0x4480-0x44ff] has been reserved system 00:06: [io 0x4800-0x487f] has been reserved system 00:06: [io 0x4880-0x48ff] has been reserved system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved system 00:06: [mem 0xfefff000-0xfeffffff] has been reserved system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: [io 0x0a00-0x0a0f] has been reserved system 00:0a: [io 0x0a10-0x0a1f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved system 00:0c: [mem 0xff780000-0xffffffff] has been reserved pci 0000:00:02.0: BAR 0: assigned [mem 0xf0000000-0xf0000fff] pci 0000:00:02.0: BAR 0: set to [mem 0xf0000000-0xf0000fff] (PCI address [0xf0000000-0xf0000fff] pci 0000:00:07.0: BAR 5: assigned [mem 0xf0001000-0xf0001fff] pci 0000:00:07.0: BAR 5: set to [mem 0xf0001000-0xf0001fff] (PCI address [0xf0001000-0xf0001fff] pci 0000:00:0a.0: BAR 0: assigned [mem 0xf0002000-0xf0002fff] pci 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff] pci 0000:00:02.1: BAR 0: assigned [mem 0xf0003000-0xf00030ff] pci 0000:00:02.1: BAR 0: set to [mem 0xf0003000-0xf00030ff] (PCI address [0xf0003000-0xf00030ff] pci 0000:00:09.0: PCI bridge to [bus 01-01] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] pci 0000:00:09.0: bridge window [mem disabled] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:00:0b.0: PCI bridge to [bus 02-02] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem disabled] pci 0000:00:0b.0: bridge window [mem pref disabled] pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io disabled] pci 0000:00:0c.0: bridge window [mem disabled] pci 0000:00:0c.0: bridge window [mem pref disabled] pci 0000:00:0d.0: PCI bridge to [bus 04-04] pci 0000:00:0d.0: bridge window [io disabled] pci 0000:00:0d.0: bridge window [mem disabled] pci 0000:00:0d.0: bridge window [mem pref disabled] pci 0000:00:0e.0: PCI bridge to [bus 05-05] pci 0000:00:0e.0: bridge window [io 0xe000-0xefff] pci 0000:00:0e.0: bridge window [mem 0xfa000000-0xfebfffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0xd0000000-0xffffffff] pci_bus 0000:00: resource 6 [mem 0xf9ff0000-0xf9ffffff] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 8 [mem 0x130000000-0xfcffffffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] pci_bus 0000:01: resource 5 [mem 0xd0000000-0xffffffff] pci_bus 0000:01: resource 6 [mem 0xf9ff0000-0xf9ffffff] pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 8 [mem 0x130000000-0xfcffffffff] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfebfffff] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: OHCI: BIOS handoff failed (BIOS bug?) 000007b4 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Linking AER extended capability pci 0000:05:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1275594338.737:1): initialized msgmni has been set to 7921 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:0b.0: setting latency timer to 64 pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X pcieport 0000:00:0c.0: setting latency timer to 64 pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X pcieport 0000:00:0d.0: setting latency timer to 64 pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X pcieport 0000:00:0e.0: setting latency timer to 64 pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X Real Time Clock Driver v1.12b Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 23 ata2: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 23 pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 ALSA device list: #0: SB Live! 5.1 Dell OEM [SB0228] (rev.10, serial:0x80661102) at 0xdc00, irq 19 TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata3.00: ATA-7: ST3250824A, 3.AAE, max UDMA/100 ata3.00: 488397168 sectors, multi 16: LBA48 ata3.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A105, max UDMA/33 ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG SP2504C, VT100-52, max UDMA7 ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 2:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A105 PQ: 0 ANSI: 5 sdb: sdb1 sdb2 < sdb5 sdb6 > sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray sd 2:0:0:0: [sdb] Attached SCSI disk Uniform CD-ROM driver Revision: 3.20 sr 2:0:1:0: Attached scsi CD-ROM sr0 ata4: port disabled. ignoring. EXT3-fs (sda3): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 420k freed kjournald starting. Commit interval 5 seconds udev: starting version 154 i2c i2c-0: nForce2 SMBus adapter at 0x5000 i2c i2c-1: nForce2 SMBus adapter at 0x6000 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:0a.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr gameport gameport0: EMU10K1 is pci0000:01:09.1/gameport0, io 0xd880, speed 1202kHz usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x096080c1) [drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:05:00.0: ... appears to be valid [drm] nouveau 0000:05:00.0: BIT BIOS found [drm] nouveau 0000:05:00.0: Bios version 62.94.28.00 [drm] nouveau 0000:05:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:05:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:05:00.0: Raw DCB entry 0: 02000300 00000028 [drm] nouveau 0000:05:00.0: Raw DCB entry 1: 01000302 00020030 [drm] nouveau 0000:05:00.0: Raw DCB entry 2: 04011310 00000028 [drm] nouveau 0000:05:00.0: Raw DCB entry 3: 02011312 00020030 [drm] nouveau 0000:05:00.0: Raw DCB entry 4: 010223f1 00c0c080 [drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:05:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [drm] nouveau 0000:05:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [drm] nouveau 0000:05:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [drm] nouveau 0000:05:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [drm] nouveau 0000:05:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Detected 512MiB VRAM [TTM] Zone kernel: Available graphics memory: 2028158 kiB. [drm] nouveau 0000:05:00.0: 512 MiB GART (aperture) mtrr: your BIOS has configured an incorrect mask, fixing it. mtrr: your BIOS has configured an incorrect mask, fixing it. [drm] nouveau 0000:05:00.0: Allocating FIFO number 1 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:05:00.0: Detected a DAC output [drm] nouveau 0000:05:00.0: Detected a TMDS output [drm] nouveau 0000:05:00.0: Detected a DAC output [drm] nouveau 0000:05:00.0: Detected a TMDS output [drm] nouveau 0000:05:00.0: DCB encoder 1 unknown [drm] nouveau 0000:05:00.0: Detected a DVI-I connector [drm] nouveau 0000:05:00.0: Detected a DVI-I connector [drm] nouveau 0000:05:00.0: Detected a TV connector [drm] nouveau 0000:05:00.0: no encoders, ignoring [drm] nouveau 0000:05:00.0: allocated 1680x1050 fb: 0x40250000, bo ffff88012ef82400 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:05:00.0 on minor 0 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:70:8b:50 forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 21, io mem 0xf0003000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xf0000000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 2 usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input1 generic-usb 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x8 powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0xa powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xc powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xe powernow-k8: 4 : fid 0xe (2200 MHz), vid 0x10 powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance vboxdrv: counter framework which can generate NMIs is active. You have to prevent vboxdrv: the usage of hardware performance counters by vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid vboxdrv: Found 2 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa01343e0 vboxdrv: fAsync=1 offMin=0x1b758 offMax=0x1b758 vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.2.0 (interface 0x00140001). EXT3-fs (sda3): using internal journal EXT2-fs (sda1): warning: mounting ext3 filesystem as ext2 kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with writeback data mode REISERFS (device sda5): found reiserfs format "3.6" with standard journal REISERFS (device sda5): using ordered data mode REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda5): checking transaction log (sda5) REISERFS (device sda5): Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended EXT3-fs (sda7): using internal journal EXT3-fs (sda7): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sdb6): warning: checktime reached, running e2fsck is recommended EXT3-fs (sdb6): using internal journal EXT3-fs (sdb6): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda9): warning: checktime reached, running e2fsck is recommended EXT3-fs (sda9): using internal journal EXT3-fs (sda9): mounted filesystem with writeback data mode fuse init (API version 7.13) Adding 1959924k swap on /dev/sda2. Priority:-1 extents:1 across:1959924k NET: Registered protocol family 10 w83627ehf: Found W83627EHG chip at 0xa10 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold ACPI: 'PS2M' and 'PS2K' have the same GPE, can't disable/enable one separately Clocksource tsc unstable (delta = -274986079 ns) ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 Console: switching to colour frame buffer device 210x65 [drm] nouveau 0000:05:00.0: Allocating FIFO number 2 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:05:00.0: Allocating FIFO number 3 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 3 CPU 1 is now offline SMP alternatives: switching to UP code usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Stopping disk ACPI handle has no context! serial 00:05: disabled [drm] nouveau 0000:05:00.0: Disabling fbcon acceleration... [drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)... [drm] nouveau 0000:05:00.0: Evicting buffers... forcedeth 0000:00:0a.0: PME# enabled forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI forcedeth 0000:00:0a.0: PCI INT A disabled ehci_hcd 0000:00:02.1: PCI INT B disabled ohci_hcd 0000:00:02.0: PCI INT A disabled ata4: port disabled. ignoring. EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk [drm] nouveau 0000:05:00.0: Idling channels... [drm] nouveau 0000:05:00.0: Suspending GPU objects... sata_nv 0000:00:07.0: PCI INT A disabled [drm] nouveau 0000:05:00.0: And we're gone! nouveau 0000:05:00.0: PCI INT A disabled PM: suspend of devices complete after 662.592 msecs PM: late suspend of devices complete after 22.004 msecs ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Force enabled HPET at resume ACPI: Waking up from system sleep state S3 nForce2_smbus 0000:00:01.1: restoring config space at offset 0xb (was 0xcb8410de, writing 0x73101462) ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000) ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000) ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000) forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff] forcedeth 0000:00:0a.0: BAR 1: set to [io 0xb880-0xb887] (PCI address [0xb880-0xb887] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107) forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007) pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0b.0: Linking AER extended capability pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0c.0: Linking AER extended capability pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0d.0: Linking AER extended capability pcieport 0000:00:0e.0: restoring config space at offset 0x7 (was 0x2000e1e1, writing 0xe1e1) pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0e.0: Linking AER extended capability EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 10.871 msecs ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 pata_amd 0000:00:06.0: setting latency timer to 64 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI forcedeth 0000:00:0a.0: PME# disabled EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:05:00.0: We're back, enabling device... nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: POSTing device... [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: port disabled. ignoring. serial 00:05: activated [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Reinitialising engines... [drm] nouveau 0000:05:00.0: Restoring GPU objects... [drm] nouveau 0000:05:00.0: Restoring mode... [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 eth0: no link during initialization. ata2: SATA link down (SStatus 0 SControl 300) eth0: link up. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: EH complete PM: resume of devices complete after 3792.834 msecs Restarting tasks ... done. SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2 generic-usb 0003:046D:C00C.0002: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver i2c i2c-0: nForce2 SMBus adapter at 0x5000 i2c i2c-1: nForce2 SMBus adapter at 0x6000 w83627ehf: Found W83627EHG chip at 0xa10 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 CPU 1 is now offline SMP alternatives: switching to UP code usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Stopping disk ACPI handle has no context! serial 00:05: disabled [drm] nouveau 0000:05:00.0: Disabling fbcon acceleration... [drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)... [drm] nouveau 0000:05:00.0: Evicting buffers... forcedeth 0000:00:0a.0: PME# enabled forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI ehci_hcd 0000:00:02.1: PCI INT B disabled ohci_hcd 0000:00:02.0: PCI INT A disabled ata4: port disabled. ignoring. EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk [drm] nouveau 0000:05:00.0: Idling channels... [drm] nouveau 0000:05:00.0: Suspending GPU objects... sata_nv 0000:00:07.0: PCI INT A disabled [drm] nouveau 0000:05:00.0: And we're gone! nouveau 0000:05:00.0: PCI INT A disabled PM: suspend of devices complete after 659.585 msecs PM: late suspend of devices complete after 22.003 msecs ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Force enabled HPET at resume ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000) ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000) ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000) forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff] forcedeth 0000:00:0a.0: BAR 1: set to [io 0xb880-0xb887] (PCI address [0xb880-0xb887] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107) forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007) pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0b.0: Linking AER extended capability pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0c.0: Linking AER extended capability pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0d.0: Linking AER extended capability pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0e.0: Linking AER extended capability EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 10.838 msecs ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 pata_amd 0000:00:06.0: setting latency timer to 64 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI forcedeth 0000:00:0a.0: PME# disabled EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:05:00.0: We're back, enabling device... nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: POSTing device... [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: port disabled. ignoring. serial 00:05: activated [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Reinitialising engines... [drm] nouveau 0000:05:00.0: Restoring GPU objects... [drm] nouveau 0000:05:00.0: Restoring mode... [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 eth0: no link during initialization. ata2: SATA link down (SStatus 0 SControl 300) eth0: link up. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: EH complete PM: resume of devices complete after 3540.829 msecs Restarting tasks ... done. SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3 generic-usb 0003:046D:C00C.0003: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver i2c i2c-0: nForce2 SMBus adapter at 0x5000 i2c i2c-1: nForce2 SMBus adapter at 0x6000 w83627ehf: Found W83627EHG chip at 0xa10 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [drm] nouveau 0000:05:00.0: Allocating FIFO number 4 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 4 [drm] nouveau 0000:05:00.0: Allocating FIFO number 5 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 5 CPU 1 is now offline SMP alternatives: switching to UP code usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Stopping disk ACPI handle has no context! serial 00:05: disabled [drm] nouveau 0000:05:00.0: Disabling fbcon acceleration... [drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)... [drm] nouveau 0000:05:00.0: Evicting buffers... forcedeth 0000:00:0a.0: PME# enabled forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI ehci_hcd 0000:00:02.1: PCI INT B disabled ohci_hcd 0000:00:02.0: PCI INT A disabled ata4: port disabled. ignoring. EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk [drm] nouveau 0000:05:00.0: Idling channels... [drm] nouveau 0000:05:00.0: Suspending GPU objects... sata_nv 0000:00:07.0: PCI INT A disabled [drm] nouveau 0000:05:00.0: And we're gone! nouveau 0000:05:00.0: PCI INT A disabled PM: suspend of devices complete after 950.579 msecs PM: late suspend of devices complete after 22.005 msecs ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Force enabled HPET at resume ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000) ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000) ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000) forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff] forcedeth 0000:00:0a.0: BAR 1: set to [io 0xb880-0xb887] (PCI address [0xb880-0xb887] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107) forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007) pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0b.0: Linking AER extended capability pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0c.0: Linking AER extended capability pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0d.0: Linking AER extended capability pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0e.0: Linking AER extended capability EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 10.827 msecs ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 pata_amd 0000:00:06.0: setting latency timer to 64 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI forcedeth 0000:00:0a.0: PME# disabled EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:05:00.0: We're back, enabling device... nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: POSTing device... [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: port disabled. ignoring. serial 00:05: activated [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Reinitialising engines... [drm] nouveau 0000:05:00.0: Restoring GPU objects... [drm] nouveau 0000:05:00.0: Restoring mode... [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 eth0: no link during initialization. ata2: SATA link down (SStatus 0 SControl 300) eth0: link up. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: EH complete PM: resume of devices complete after 4354.818 msecs Restarting tasks ... done. SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input4 generic-usb 0003:046D:C00C.0004: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver i2c i2c-0: nForce2 SMBus adapter at 0x5000 i2c i2c-1: nForce2 SMBus adapter at 0x6000 w83627ehf: Found W83627EHG chip at 0xa10 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 Hangcheck: hangcheck value past margin! CPU 1 is now offline SMP alternatives: switching to UP code usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Stopping disk ACPI handle has no context! serial 00:05: disabled [drm] nouveau 0000:05:00.0: Disabling fbcon acceleration... [drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)... [drm] nouveau 0000:05:00.0: Evicting buffers... forcedeth 0000:00:0a.0: PME# enabled forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI ehci_hcd 0000:00:02.1: PCI INT B disabled ohci_hcd 0000:00:02.0: PCI INT A disabled ata4: port disabled. ignoring. EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk [drm] nouveau 0000:05:00.0: Idling channels... [drm] nouveau 0000:05:00.0: Suspending GPU objects... sata_nv 0000:00:07.0: PCI INT A disabled [drm] nouveau 0000:05:00.0: And we're gone! nouveau 0000:05:00.0: PCI INT A disabled PM: suspend of devices complete after 881.569 msecs PM: late suspend of devices complete after 22.004 msecs ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Force enabled HPET at resume ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000) ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000) ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000) forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff] forcedeth 0000:00:0a.0: BAR 1: set to [io 0xb880-0xb887] (PCI address [0xb880-0xb887] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107) forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007) pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0b.0: Linking AER extended capability pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0c.0: Linking AER extended capability pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0d.0: Linking AER extended capability pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0e.0: Linking AER extended capability EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 10.839 msecs ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 pata_amd 0000:00:06.0: setting latency timer to 64 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI forcedeth 0000:00:0a.0: PME# disabled EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:05:00.0: We're back, enabling device... nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: POSTing device... [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: port disabled. ignoring. serial 00:05: activated [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Reinitialising engines... [drm] nouveau 0000:05:00.0: Restoring GPU objects... [drm] nouveau 0000:05:00.0: Restoring mode... [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 eth0: no link during initialization. ata2: SATA link down (SStatus 0 SControl 300) eth0: link up. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: EH complete PM: resume of devices complete after 4471.872 msecs Restarting tasks ... done. SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input5 generic-usb 0003:046D:C00C.0005: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver i2c i2c-0: nForce2 SMBus adapter at 0x5000 i2c i2c-1: nForce2 SMBus adapter at 0x6000 w83627ehf: Found W83627EHG chip at 0xa10 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 CPU 1 is now offline SMP alternatives: switching to UP code usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Stopping disk ACPI handle has no context! serial 00:05: disabled [drm] nouveau 0000:05:00.0: Disabling fbcon acceleration... [drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)... [drm] nouveau 0000:05:00.0: Evicting buffers... forcedeth 0000:00:0a.0: PME# enabled forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI ehci_hcd 0000:00:02.1: PCI INT B disabled ohci_hcd 0000:00:02.0: PCI INT A disabled ata4: port disabled. ignoring. EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk [drm] nouveau 0000:05:00.0: Idling channels... [drm] nouveau 0000:05:00.0: Suspending GPU objects... sata_nv 0000:00:07.0: PCI INT A disabled [drm] nouveau 0000:05:00.0: And we're gone! nouveau 0000:05:00.0: PCI INT A disabled PM: suspend of devices complete after 916.578 msecs PM: late suspend of devices complete after 22.006 msecs ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Force enabled HPET at resume ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000) ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000) ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000) forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff] forcedeth 0000:00:0a.0: BAR 1: set to [io 0xb880-0xb887] (PCI address [0xb880-0xb887] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107) forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007) pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0b.0: Linking AER extended capability pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0c.0: Linking AER extended capability pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0d.0: Linking AER extended capability pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0e.0: Linking AER extended capability EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 10.842 msecs ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 pata_amd 0000:00:06.0: setting latency timer to 64 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI forcedeth 0000:00:0a.0: PME# disabled EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:05:00.0: We're back, enabling device... nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: POSTing device... [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: port disabled. ignoring. serial 00:05: activated [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Reinitialising engines... [drm] nouveau 0000:05:00.0: Restoring GPU objects... [drm] nouveau 0000:05:00.0: Restoring mode... [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 eth0: no link during initialization. ata2: SATA link down (SStatus 0 SControl 300) eth0: link up. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: EH complete PM: resume of devices complete after 5268.385 msecs Restarting tasks ... done. SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input6 generic-usb 0003:046D:C00C.0006: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver i2c i2c-0: nForce2 SMBus adapter at 0x5000 i2c i2c-1: nForce2 SMBus adapter at 0x6000 w83627ehf: Found W83627EHG chip at 0xa10 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 CPU 1 is now offline SMP alternatives: switching to UP code usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Stopping disk ACPI handle has no context! serial 00:05: disabled [drm] nouveau 0000:05:00.0: Disabling fbcon acceleration... [drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)... [drm] nouveau 0000:05:00.0: Evicting buffers... forcedeth 0000:00:0a.0: PME# enabled forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI ehci_hcd 0000:00:02.1: PCI INT B disabled ohci_hcd 0000:00:02.0: PCI INT A disabled ata4: port disabled. ignoring. EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled ACPI handle has no context! sd 0:0:0:0: [sda] Stopping disk [drm] nouveau 0000:05:00.0: Idling channels... [drm] nouveau 0000:05:00.0: Suspending GPU objects... sata_nv 0000:00:07.0: PCI INT A disabled [drm] nouveau 0000:05:00.0: And we're gone! nouveau 0000:05:00.0: PCI INT A disabled PM: suspend of devices complete after 982.561 msecs PM: late suspend of devices complete after 22.023 msecs ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Force enabled HPET at resume ACPI: Waking up from system sleep state S3 ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xf9fff000, writing 0xf0000000) ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xf9ffec00, writing 0xf0003000) ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xf9ffd000, writing 0xf0001000) forcedeth 0000:00:0a.0: BAR 0: set to [mem 0xf0002000-0xf0002fff] (PCI address [0xf0002000-0xf0002fff] forcedeth 0000:00:0a.0: BAR 1: set to [io 0xb880-0xb887] (PCI address [0xb880-0xb887] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107) forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007) pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0b.0: Linking AER extended capability pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0c.0: Linking AER extended capability pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0d.0: Linking AER extended capability pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport 0000:00:0e.0: Linking AER extended capability EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 10.794 msecs ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 pata_amd 0000:00:06.0: setting latency timer to 64 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI forcedeth 0000:00:0a.0: PME# disabled EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:05:00.0: We're back, enabling device... nouveau 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: POSTing device... [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: port disabled. ignoring. serial 00:05: activated [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Reinitialising engines... [drm] nouveau 0000:05:00.0: Restoring GPU objects... [drm] nouveau 0000:05:00.0: Restoring mode... [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 eth0: no link during initialization. ata2: SATA link down (SStatus 0 SControl 300) eth0: link up. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 12288 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:18:5b:a8:91/00:00:00:00:00/e0 tag 0 dma 12288 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 1a 94 a1 sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0 sd 0:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 91 a8 5b 00 00 18 00 end_request: I/O error, dev sda, sector 9545819 Aborting journal on device sda3. ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata3.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out ata3.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata3.00: configured for UDMA/100 ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata3.01: configured for UDMA/33 ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) ata1.00: configured for UDMA/133 ata1: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: failed command: WRITE DMA ata1.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:a1:94:1a/00:00:00:00:00/e0 Emask 0x40 (internal error) ata1.00: status: { DRDY } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 1a 94 a1 sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0 sd 0:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 91 97 3b 00 00 08 00 end_request: I/O error, dev sda, sector 9541435 Buffer I/O error on device sda3, logical block 688640 lost page write due to I/O error on sda3 ata1: EH complete ata3.00: configured for UDMA/100 ata3.01: configured for UDMA/33 ata3: EH complete PM: resume of devices complete after 5117.506 msecs Restarting tasks ... EXT3-fs (sda3): error: ext3_journal_start_sb: Detected aborted journal EXT3-fs (sda3): error: remounting filesystem read-only done. SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input7 generic-usb 0003:046D:C00C.0007: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver i2c i2c-0: nForce2 SMBus adapter at 0x5000 i2c i2c-1: nForce2 SMBus adapter at 0x6000 w83627ehf: Found W83627EHG chip at 0xa10 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 ------------[ cut here ]------------ WARNING: at fs/ext3/inode.c:1608 ext3_writeback_writepage+0x4f/0x180() Hardware name: MS-7310 Modules linked in: k8temp w83627ehf i2c_nforce2 usbhid fbcon font bitblit softcursor xt_tcpudp iptable_filter ipt_addrtype xt_dscp xt_string xt_multiport xt_mark xt_hashlimit xt_conntrack xt_connmark xt_NFQUEUE xt_MARK xt_CONNMARK nf_conntrack ip_tables x_tables cpufreq_ondemand nfsd exportfs hwmon_vid ipv6 fuse nls_iso8859_1 nls_cp437 vboxnetadp vboxnetflt vboxdrv powernow_k8 freq_table ohci_hcd nouveau ttm ehci_hcd usbcore drm_kms_helper fb forcedeth emu10k1_gp gameport cfbcopyarea cfbimgblt thermal cfbfillrect processor [last unloaded: i2c_nforce2] Pid: 1940, comm: flush-8:0 Not tainted 2.6.34-gentoo-nyx #5 Call Trace: [] warn_slowpath_common+0x77/0x8f [] warn_slowpath_null+0xf/0x11 [] ext3_writeback_writepage+0x4f/0x180 [] __writepage+0x12/0x2b [] write_cache_pages+0x1f5/0x324 [] ? __writepage+0x0/0x2b [] generic_writepages+0x1f/0x21 [] do_writepages+0x23/0x25 [] writeback_single_inode+0xe2/0x2d7 [] writeback_inodes_wb+0x422/0x529 [] wb_writeback+0x134/0x1bb [] wb_do_writeback+0x17d/0x193 [] bdi_writeback_task+0x3a/0xab [] ? bdi_start_fn+0x0/0xd6 [] bdi_start_fn+0x71/0xd6 [] ? bdi_start_fn+0x0/0xd6 [] kthread+0x7a/0x82 [] kernel_thread_helper+0x4/0x10 [] ? kthread+0x0/0x82 [] ? kernel_thread_helper+0x0/0x10 ---[ end trace b37f94aea63e27c0 ]---