Linux version 2.6.32-xen-r1-Gentoo-uranus-1-16 (root@uranus) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #3 SMP Sat May 29 20:47:57 CEST 2010 Command line: root=/dev/md5 odmraid root_=UUID=3ae46540:5da32e75:3b8ef3b3:48c699fd loop.max_part=63 max_part=63 panic=30 quiet noresume_ vga=794 video__=1280x1024 vga_=normal nomodeset_ KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfde0000 (usable) BIOS-e820: 00000000bfde0000 - 00000000bfde3000 (ACPI NVS) BIOS-e820: 00000000bfde3000 - 00000000bfdf0000 (ACPI data) BIOS-e820: 00000000bfdf0000 - 00000000bfe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.4 present. last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000BFE00000 mask FFFFFFE00000 uncachable 3 base 000100000000 mask FFFFC0000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbfde0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000bfde0000 0000000000 - 0080000000 page 1G 0080000000 - 00bfc00000 page 2M 00bfc00000 - 00bfde0000 page 4k kernel direct mapping tables up to bfde0000 @ 8000-b000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 1G kernel direct mapping tables up to 140000000 @ a000-b000 ACPI: RSDP 00000000000f7270 00014 (v00 GBT ) ACPI: RSDT 00000000bfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000bfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000bfde30c0 07299 (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000bfde0000 00040 ACPI: HPET 00000000bfdea440 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000bfdea480 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 00000000bfdea4c0 0030A (v01 GBT GBT B0 5455312E BG?? 53450101) ACPI: APIC 00000000bfdea380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001c846b4] TEXT DATA BSS ==> [0001000000 - 0001c846b4] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [0001c85000 - 0001c850fe] BRK ==> [0001c85000 - 0001c850fe] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f58d0] f58d0 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bfde0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1047935 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3842 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767512 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at bfe00000 (gap: bfe00000:20200000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880028200000 s74264 r8192 d24040 u524288 pcpu-alloc: s74264 r8192 d24040 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029914 Kernel command line: root=/dev/md5 odmraid root_=UUID=3ae46540:5da32e75:3b8ef3b3:48c699fd loop.max_part=63 max_part=63 panic=30 quiet noresume_ vga=794 video__=1280x1024 vga_=normal nomodeset_ PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 4048324k/5242880k available (7580k kernel code, 1051140k absent, 142492k reserved, 3968k data, 536k init) Hierarchical RCU implementation. NR_IRQS:384 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 3415.370 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.73 BogoMIPS (lpj=3415366) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 00bfe00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Phenom(tm) II X4 965 Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: AMD Phenom(tm) II X4 965 Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: AMD Phenom(tm) II X4 965 Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (27323.41 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 13304.000 MB/sec xor: using function: generic_sse (13304.000 MB/sec) regulator: core version 0.5 NET: Registered protocol family 16 node 0 link 0: io port [b000, ffff] TOM: 00000000c0000000 aka 3072M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff] TOM2: 0000000140000000 aka 5120M bus: [00,04] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [c0000000, dfffffff] bus: 00 index 3 mmio: [e0500000, ffffffff] bus: 00 index 4 mmio: [e0100000, e04fffff] bus: 00 index 5 mmio: [140000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdae0000-0xfdaeffff] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xfdafc000-0xfdafffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: bridge io port: [0xe000-0xefff] pci 0000:00:02.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfe0000-0xfdfeffff] pci 0000:02:00.0: reg 20 io port: [0xde00-0xdeff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.1: reg 10 64bit mmio: [0xfdffc000-0xfdffffff] pci 0000:02:00.1: supports D1 D2 pci 0000:00:04.0: bridge io port: [0xd000-0xdfff] pci 0000:00:04.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:03:00.0: reg 10 io port: [0xce00-0xceff] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xfddff000-0xfddfffff] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xfdde0000-0xfddeffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] pci 0000:04:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff] pci 0000:04:0e.0: reg 14 32bit mmio: [0xfdcf8000-0xfdcfbfff] pci 0000:04:0e.0: supports D1 D2 pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:0e.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xb000-0xbfff] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 3210 MB/s raid6: int64x2 3953 MB/s raid6: int64x4 3230 MB/s raid6: int64x8 3019 MB/s raid6: sse2x1 4625 MB/s raid6: sse2x2 7707 MB/s raid6: sse2x4 8398 MB/s raid6: using algorithm sse2x4 (8398 MB/s) PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] pci 0000:00:00.0: BAR 3: can't allocate resource Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized NET: Registered protocol family 8 NET: Registered protocol family 20 Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0d: mem resource (0xd2c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0x100000-0xbfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x220-0x225 has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:02: ioport range 0x4100-0x411f has been reserved system 00:02: ioport range 0x228-0x22f has been reserved system 00:02: ioport range 0x40b-0x40b has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:02: ioport range 0xc00-0xc01 has been reserved system 00:02: ioport range 0xc14-0xc14 has been reserved system 00:02: ioport range 0xc50-0xc52 has been reserved system 00:02: ioport range 0xc6c-0xc6d has been reserved system 00:02: ioport range 0xc6f-0xc6f has been reserved system 00:02: ioport range 0xcd0-0xcd1 has been reserved system 00:02: ioport range 0xcd2-0xcd3 has been reserved system 00:02: ioport range 0xcd4-0xcdf has been reserved system 00:02: ioport range 0x4000-0x40fe has been reserved system 00:02: ioport range 0x4210-0x4217 has been reserved system 00:02: ioport range 0xb00-0xb0f has been reserved system 00:02: ioport range 0xb10-0xb1f has been reserved system 00:02: ioport range 0xb20-0xb3f has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0xbfde0000-0xbfdfffff could not be reserved system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xe000-0xefff pci 0000:00:02.0: MEM window: 0xfda00000-0xfdafffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0xd000-0xdfff pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0a.0: IO window: 0xc000-0xcfff pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:0a.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:04 pci 0000:00:14.4: IO window: 0xb000-0xbfff pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] pci_bus 0000:01: resource 1 mem: [0xfda00000-0xfdafffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:04: resource 2 pref mem [0xfdb00000-0xfdbfffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1275161157.533:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ROMFS MTD (C) 2007 Red Hat, Inc. fuse init (API version 7.13) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 7908 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 lp: driver loaded but no devices found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010700000, using 5120k, total 16384k vesafb: mode is 1280x1024x16, linelength=2560, pages=5 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded nbd: registered device at major 43 Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 SCSI Media Changer driver v0.25 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi6 : pata_atiixp scsi7 : pata_atiixp ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 parport0: AVR Butterfly parport0: cannot grant exclusive access for device spi-lm70llp spi-lm70llp: spi_lm70llp probe fail, status -12 Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 Copyright (c) 2007-2009 Intel Corporation. Intel(R) Virtual Function Network Driver - version 1.0.0-k0 Copyright (c) 2009 Intel Corporation. Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. Atheros(R) L2 Ethernet Driver - version 2.2.3 Copyright (c) 2007 Atheros Corporation. jme: JMicron JMC2XX ethernet driver version 1.0.5 NET3 PLIP version 2.4-parport gniibe@mri.co.jp plip0: Parallel port at 0x378, using IRQ 7. pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ThunderLAN driver v1.15a TLAN: 0 devices installed, PCI: 0 EISA: 0 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. Broadcom NetXtreme II CNIC Driver cnic v2.0.1 (Oct 01, 2009) sky2 driver version 1.25 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:03:00.0: setting latency timer to 64 r8169 0000:03:00.0: irq 25 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc9000004c000, 6c:f0:49:02:21:9b, XID 1c4000c0 IRQ 25 firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ata7.01: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.05, max UDMA/33 ata7.01: configured for UDMA/33 firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI version 1.10 ieee1394: raw1394: /dev/raw1394 device initialized aoe: AoE v47 initialised. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA usbcore: registered new interface driver usbserial USB Serial support registered for generic ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata2.00: configured for UDMA/133 ata4.00: ATA-8: ST31000340AS, SD15, max UDMA/133 ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 sda: scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: Attached scsi generic sg1 type 0 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > sd 1:0:0:0: [sdb] Attached SCSI disk ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg2 type 0 sdc: scsi 3:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: Attached scsi generic sg3 type 0 sdd: scsi 6:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4521B 1.05 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:1:0: Attached scsi CD-ROM sr0 sr 6:0:1:0: Attached scsi generic sg4 type 5 sdd1 sdd2 sdd3 sdd4 < sdd5 sdc1 sdc2 sdc3 sdc4 < sdd6 sdd7 sdc5 sdd8 > sd 3:0:0:0: [sdd] Attached SCSI disk sdc6 sdc7 usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter usbcore: registered new interface driver belkin belkin_sa: v1.2:USB Belkin Serial converter driver USB Serial support registered for hp4X usbcore: registered new interface driver hp4X hp4x: v1.00:HP4x (48/49) Generic Serial driver USB Serial support registered for IR Dongle usbcore: registered new interface driver ir-usb ir_usb: v0.4:USB IR Dongle driver USB Serial support registered for MCT U232 usbcore: registered new interface driver mct_u232 mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver USB Serial support registered for navman usbcore: registered new interface driver navman USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver USB Serial support registered for TI USB 3410 1 port adapter USB Serial support registered for TI USB 5052 2 port adapter usbcore: registered new interface driver ti_usb_3410_5052 ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver USB Serial support registered for Keyspan PDA USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) usbcore: registered new interface driver keyspan_pda keyspan_pda: v1.1:USB Keyspan PDA Converter driver usbcore: registered new interface driver usblcd usbcore: registered new interface driver usbled usbcore: registered new interface driver legousbtower legousbtower: v0.96:LEGO USB Tower Driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs sdc8 > sd 2:0:0:0: [sdc] Attached SCSI disk rtc-test rtc-test.0: rtc core: registered test as rtc1 rtc-test rtc-test.1: rtc core: registered test as rtc2 i2c /dev entries driver ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver i2c-parport: adapter type unspecified i2c-parport-light: adapter type unspecified usbcore: registered new interface driver i2c-tiny-usb Driver for 1-wire Dallas network protocol. hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! it87: Found IT8718F chip at 0x228, revision 8 it87: in3 is VCC (+5V) md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Bluetooth: Virtual HCI driver ver 1.3 EDAC MC: Ver: 2.1.0 May 29 2010 cpuidle: using governor ladder dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) padlock: VIA PadLock not detected. padlock: VIA PadLock Hash Engine not detected. HIFN supports only 32-bit addresses. wacom driver registered usbip_common_mod: usbip common driver1.0 vhci_hcd: vhci_hcd, 1.0 usbip: proving... vhci_hcd vhci_hcd: USB/IP Virtual Host Contoroller vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 8 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 8 ports detected firewire_core: created device fw0: GUID 00e5d98e0000241d, S400 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 usb 5-1: new full speed USB device using ohci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk usb 5-2: new full speed USB device using ohci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice usb 6-3: new low speed USB device using ohci_hcd and address 2 usb 6-3: configuration #1 chosen from 1 choice usbip 5-1:1.0: this device 5-1 is not in match_busid table. skip! usbip 5-1:1.1: this device 5-1 is not in match_busid table. skip! usbip 5-1:1.2: this device 5-1 is not in match_busid table. skip! usbip 5-2:1.0: this device 5-2 is not in match_busid table. skip! usbip 5-2:1.1: this device 5-2 is not in match_busid table. skip! usbip 6-3:1.0: this device 6-3 is not in match_busid table. skip! usbip 6-3:1.1: this device 6-3 is not in match_busid table. skip! usbcore: registered new interface driver usbip usbip:Stub Driver for USB/IP:1.0 Advanced Linux Sound Architecture Driver Version 1.0.21. no UART detected at 0x1 snd_portman2x4: probe of snd_portman2x4.0 failed with error -5 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_codec: ALC889A: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4 HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:00.1: setting latency timer to 64 HDA Intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:02:00.1: setting latency timer to 64 usbcore: registered new interface driver snd-usb-audio usbcore: registered new interface driver snd-usb-usx2y usbcore: registered new interface driver snd-usb-us122l usbcore: registered new interface driver snd-usb-caiaq No device for DAI AD73311 Asahi Kasei AK4104 ALSA SoC Codec Driver No device for DAI AK4535 Cirrus Logic CS4270 ALSA SoC Codec Driver No device for DAI PCM3008 HiFi No device for DAI SSM2602 No device for DAI tlv320aic23 No device for DAI UDA134X No device for DAI WM8510 HiFi No device for DAI WM8728 No device for DAI WM8750 No device for DAI WM8971 No device for DAI WM8990 ADC/DAC Primary ALSA device list: #0: HDA ATI SB at 0xfe024000 irq 16 #1: HDA ATI HDMI at 0xfdafc000 irq 19 #2: HDA ATI HDMI at 0xfdffc000 irq 17 oprofile: using NMI interrupt. pktgen 2.72: Packet Generator for packet performance testing. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=64Kbytes) IPVS: ipvs loaded. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP bic registered TCP cubic registered TCP westwood registered TCP highspeed registered TCP htcp registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 lec.c: May 29 2010 20:43:16 initialized mpc.c: May 29 2010 20:43:12 initialized rtc_cmos 00:05: setting system clock to 2010-05-29 19:25:59 UTC (1275161159) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 20 and added 20 devices. md: autorun ... md: considering sda8 ... md: adding sda8 ... md: sda7 has different UUID to sda8 md: sda6 has different UUID to sda8 md: sda5 has different UUID to sda8 md: sda3 has different UUID to sda8 md: adding sdc8 ... md: sdc7 has different UUID to sda8 md: sdc6 has different UUID to sda8 md: sdc5 has different UUID to sda8 md: sdc3 has different UUID to sda8 md: adding sdd8 ... md: sdd7 has different UUID to sda8 md: sdd6 has different UUID to sda8 md: sdd5 has different UUID to sda8 md: sdd3 has different UUID to sda8 md: adding sdb8 ... md: sdb7 has different UUID to sda8 md: sdb6 has different UUID to sda8 md: sdb5 has different UUID to sda8 md: sdb3 has different UUID to sda8 md: created md8 md: bind md: bind md: bind md: bind md: running: raid5: device sda8 operational as raid disk 0 raid5: device sdc8 operational as raid disk 2 raid5: device sdd8 operational as raid disk 3 raid5: device sdb8 operational as raid disk 1 raid5: allocated 4272kB for md8 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md8 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda8 disk 1, o:1, dev:sdb8 disk 2, o:1, dev:sdc8 disk 3, o:1, dev:sdd8 md8: detected capacity change from 0 to 2661437079552 md: considering sda7 ... md: adding sda7 ... md: sda6 has different UUID to sda7 md: sda5 has different UUID to sda7 md: sda3 has different UUID to sda7 md: adding sdc7 ... md: sdc6 has different UUID to sda7 md: sdc5 has different UUID to sda7 md: sdc3 has different UUID to sda7 md: adding sdd7 ... md: sdd6 has different UUID to sda7 md: sdd5 has different UUID to sda7 md: sdd3 has different UUID to sda7 md: adding sdb7 ... md: sdb6 has different UUID to sda7 md: sdb5 has different UUID to sda7 md: sdb3 has different UUID to sda7 md: created md7 md: bind md: bind md: bind md: bind md: running: raid5: device sda7 operational as raid disk 0 raid5: device sdc7 operational as raid disk 2 raid5: device sdd7 operational as raid disk 3 raid5: device sdb7 operational as raid disk 1 raid5: allocated 4272kB for md7 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md7 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda7 disk 1, o:1, dev:sdb7 disk 2, o:1, dev:sdc7 disk 3, o:1, dev:sdd7 md7: detected capacity change from 0 to 150028812288 md: considering sda6 ... md: adding sda6 ... md: sda5 has different UUID to sda6 md: sda3 has different UUID to sda6 md: adding sdc6 ... md: sdc5 has different UUID to sda6 md: sdc3 has different UUID to sda6 md: adding sdd6 ... md: sdd5 has different UUID to sda6 md: sdd3 has different UUID to sda6 md: adding sdb6 ... md: sdb5 has different UUID to sda6 md: sdb3 has different UUID to sda6 md: created md6 md: bind md: bind md: bind md: bind md: running: raid5: device sda6 operational as raid disk 0 raid5: device sdc6 operational as raid disk 2 raid5: device sdd6 operational as raid disk 3 raid5: device sdb6 operational as raid disk 1 raid5: allocated 4272kB for md6 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md6 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda6 disk 1, o:1, dev:sdb6 disk 2, o:1, dev:sdc6 disk 3, o:1, dev:sdd6 md6: detected capacity change from 0 to 90017169408 md: considering sda5 ... md: adding sda5 ... md: sda3 has different UUID to sda5 md: adding sdc5 ... md: sdc3 has different UUID to sda5 md: adding sdd5 ... md: sdd3 has different UUID to sda5 md: adding sdb5 ... md: sdb3 has different UUID to sda5 md: created md5 md: bind md: bind md: bind md: bind md: running: raid5: device sda5 operational as raid disk 0 raid5: device sdc5 operational as raid disk 2 raid5: device sdd5 operational as raid disk 3 raid5: device sdb5 operational as raid disk 1 raid5: allocated 4272kB for md5 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md5 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda5 disk 1, o:1, dev:sdb5 disk 2, o:1, dev:sdc5 disk 3, o:1, dev:sdd5 md5: detected capacity change from 0 to 30030102528 md: considering sda3 ... md: adding sda3 ... md: adding sdc3 ... md: adding sdd3 ... md: adding sdb3 ... md: created md3 md: bind md: bind md: bind md: bind md: running: raid0: looking at sda3 raid0: comparing sda3(3919616) with sda3(3919616) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdc3 raid0: comparing sdc3(3919616) with sda3(3919616) raid0: EQUAL raid0: looking at sdd3 raid0: comparing sdd3(3919616) with sda3(3919616) raid0: EQUAL raid0: looking at sdb3 raid0: comparing sdb3(3919616) with sda3(3919616) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 15678464 sectors. ******* md3 configuration ********* zone0=[sda3/sdb3/sdc3/sdd3/] zone offset=0kb device offset=0kb size=7839232kb ********************************** md3: detected capacity change from 0 to 8027373568 md: ... autorun DONE. md5: unknown partition table EXT3-fs: md5: couldn't mount because of unsupported optional features (240). EXT2-fs: md5: couldn't mount because of unsupported optional features (240). EXT4-fs (md5): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 9:5. Freeing unused kernel memory: 536k freed udev: starting version 149 md3: md8: md7: md6: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input5 generic-usb 0003:046D:C525.0001: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input6 generic-usb 0003:046D:C525.0002: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-2/input1 input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input7 generic-usb 0003:045E:0730.0003: input: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:13.1-3/input0 input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input8 generic-usb 0003:045E:0730.0004: input: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:13.1-3/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver unknown partition table unknown partition table unknown partition table unknown partition table [drm] Initialized drm 1.1.0 20060810 [drm] VGACON disable radeon kernel modesetting. pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 pci 0000:02:00.0: enabling device (0000 -> 0003) pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:02:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 1 fglrx: disagrees about version of symbol module_layout fglrx: disagrees about version of symbol module_layout loop5: EXT4-fs (loop5): mounted filesystem with ordered data mode Adding 7839224k swap on /dev/md3. Priority:-1 extents:1 across:7839224k JBD: barrier-based sync failed on md5-8 - disabling barriers r8169: eth0: link up r8169: eth0: link up JBD: barrier-based sync failed on md5-8 - disabling barriers