Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data) BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.3 present. last_pfn = 0x1fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000001fff0000 (usable) modified: 000000001fff0000 - 000000001fffec00 (ACPI data) modified: 000000001fffec00 - 0000000020000000 (ACPI NVS) modified: 00000000fff80000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000001fff0000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001fff0000 page 4k kernel direct mapping tables up to 1fff0000 @ 15000-1a000 RAMDISK: 00d58000 - 00efff3b ACPI: RSDP 000f7160 00014 (v00 PTLTD ) ACPI: RSDT 1fff53d5 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) ACPI: FACP 1fffeb65 00074 (v01 IBM TP-13 06040000 00000000) ACPI: DSDT 1fff5401 09764 (v01 IBM TP-13 06040000 MSFT 0100000C) ACPI: FACS 1ffff000 00040 ACPI: BOOT 1fffebd9 00027 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) 0MB HIGHMEM available. 511MB LOWMEM available. mapped low ram: 0 - 1fff0000 low ram: 0 - 1fff0000 node 0 low ram: 00000000 - 1fff0000 node 0 bootmap 00016000 - 0001a000 (10 early reservations) ==> bootmem [0000000000 - 001fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444] #3 [0000d58000 - 0000efff3b] RAMDISK ==> [0000d58000 - 0000efff3b] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0001551000 - 00015570f5] BRK ==> [0001551000 - 00015570f5] #6 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000] #7 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000] #8 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000] #9 [0000016000 - 000001a000] BOOTMAP ==> [0000016000 - 000001a000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001fff0 HighMem 0x0001fff0 -> 0x0001fff0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0001fff0 On node 0 totalpages: 130945 free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3953 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125968 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" APIC: disable apic facility APIC: switched to apic NOOP nr_irqs_gsi: 16 PM: Registered nosave memory: 0000000000002000 - 0000000000010000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c1c00000 s34776 r0 d22568 u4194304 pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129921 Kernel command line: BOOT_IMAGE=arch ro root=802 pci=nomsi hpet=force acpi_osi=Linux acpi.power_nocheck=1 ACPI: Added _OSI(Linux) PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 2621120 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (00000000:00000000) Memory: 509316k/524224k available (2895k kernel code, 14324k reserved, 1208k data, 408k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc1403000 - 0xc1469000 ( 408 kB) .data : 0xc12d3f1e - 0xc14022e0 (1208 kB) .text : 0xc1000000 - 0xc12d3f1e (2895 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 896.722 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 1794.17 BogoMIPS (lpj=2989073) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls mce: CPU supports 5 MCE banks Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20091214 ACPI: setting ELCR to 0200 (from 0800) weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (1794.17 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=15 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [PSER] (off) ACPI: Power Resource [PSIO] (on) ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored) pci 0000:00:00.0: reg 10: [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:02.0: reg 10: [mem 0x50000000-0x50000fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0x50100000-0x50100fff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: reg 10: [mem 0xd0120000-0xd0120fff] pci 0000:00:03.0: reg 14: [io 0x1800-0x183f] pci 0000:00:03.0: reg 18: [mem 0xd0100000-0xd011ffff] pci 0000:00:03.0: reg 30: [mem 0x00000000-0x000fffff pref] pci 0000:00:03.0: supports D1 D2 pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: reg 10: [io 0x1840-0x1847] pci 0000:00:03.1: reg 14: [mem 0xd0121000-0xd0121fff] pci 0000:00:03.1: supports D1 D2 pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.1: PME# disabled pci 0000:00:04.0: supports D1 D2 pci 0000:00:05.0: reg 10: [mem 0xd0122000-0xd0122fff] pci 0000:00:05.0: reg 14: [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: supports D1 D2 pci 0000:00:07.1: reg 20: [io 0x1850-0x185f] pci 0000:00:07.2: reg 20: [io 0x1860-0x187f] pci 0000:00:07.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: [io 0x1040-0x104f] claimed by PIIX4 SMB pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] pci 0000:01:00.0: reg 18: [mem 0xd0200000-0xd0203fff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xd0200000-0xd02fffff] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff pref] pci 0000:08:00.0: supports D1 pci 0000:08:00.0: PME# supported from D0 D1 D3hot pci 0000:08:00.0: PME# disabled pci 0000:08:01.0: reg 10: [io 0x3020-0x3027] pci 0000:08:01.0: reg 14: [io 0x3014-0x3017] pci 0000:08:01.0: reg 18: [io 0x3018-0x301f] pci 0000:08:01.0: reg 1c: [io 0x3010-0x3013] pci 0000:08:01.0: reg 20: [io 0x3000-0x300f] pci 0000:08:01.0: supports D1 D2 pci 0000:08:02.0: reg 10: [mem 0x52000000-0x52000fff] pci 0000:08:02.0: supports D1 D2 pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:02.0: PME# disabled pci 0000:08:02.1: reg 10: [mem 0x53000000-0x53000fff] pci 0000:08:02.1: supports D1 D2 pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:02.1: PME# disabled pci 0000:00:04.0: PCI bridge to [bus 08-0e] (subtractive decode) pci 0000:00:04.0: bridge window [io 0x0000-0x0fff] pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff] pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff pref] pci 0000:09:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:09:00.0: reg 18: [mem 0xd0310000-0xd031ffff 64bit] pci 0000:09:00.0: reg 20: [io 0x4000-0x40ff] pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:09:00.0: supports D1 D2 pci 0000:09:00.1: reg 10: [mem 0xd0300000-0xd030ffff 64bit] pci 0000:09:00.1: supports D1 D2 pci 0000:08:00.0: PCI bridge to [bus 09-09] pci 0000:08:00.0: bridge window [io 0x4000-0x4fff] pci 0000:08:00.0: bridge window [mem 0xd0300000-0xd03fffff] pci 0000:08:00.0: bridge window [mem 0xe0000000-0xefffffff pref] pci_bus 0000:0e: [bus 0e-11] partially hidden behind transparent bridge 0000:08 [bus 08-0e] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 32 bytes pci 0000:00:04.0: can't reserve window [io 0x0000-0x0fff] pci 0000:00:04.0: can't reserve window [mem 0x00000000-0x000fffff] pci 0000:00:04.0: can't reserve window [mem 0x00000000-0x000fffff pref] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000d4000-0x000d3fff disabled] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000d8000-0x000d7fff disabled] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000dc000-0x000dbfff disabled] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000e0000-0x000e3fff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000e4000-0x000e7fff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000e8000-0x000ebfff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000ec000-0x000effff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp 00:00: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:03.0 BAR 6 [mem 0x00000000-0x000fffff pref] pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved system 00:00: [mem 0xfff80000-0xffffffff] has been reserved system 00:02: [io 0x1000-0x103f] has been reserved system 00:02: [io 0x1040-0x104f] has been reserved system 00:02: [io 0xfe00-0xfe0f] has been reserved system 00:09: [io 0x15e0-0x15ef] has been reserved pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref] pci 0000:00:02.0: BAR 16: assigned [mem 0x24000000-0x27ffffff] pci 0000:00:02.1: BAR 15: assigned [mem 0x28000000-0x2bffffff pref] pci 0000:00:02.1: BAR 16: assigned [mem 0x2c000000-0x2fffffff] pci 0000:00:04.0: BAR 14: assigned [mem 0x30000000-0x37ffffff] pci 0000:00:04.0: BAR 15: assigned [mem 0x38000000-0x3fffffff pref] pci 0000:00:03.0: BAR 6: assigned [mem 0x40000000-0x400fffff pref] pci 0000:00:04.0: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:00:02.0: BAR 13: assigned [io 0x1400-0x14ff] pci 0000:00:02.0: BAR 14: assigned [io 0x1c00-0x1cff] pci 0000:00:02.1: BAR 13: assigned [io 0x3400-0x34ff] pci 0000:00:02.1: BAR 14: assigned [io 0x3800-0x38ff] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0220000-0xd023ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xd0200000-0xd02fffff] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff pref] pci 0000:00:02.0: CardBus bridge to [bus 12-15] pci 0000:00:02.0: bridge window [io 0x1400-0x14ff] pci 0000:00:02.0: bridge window [io 0x1c00-0x1cff] pci 0000:00:02.0: bridge window [mem 0x20000000-0x23ffffff pref] pci 0000:00:02.0: bridge window [mem 0x24000000-0x27ffffff] pci 0000:00:02.1: CardBus bridge to [bus 16-19] pci 0000:00:02.1: bridge window [io 0x3400-0x34ff] pci 0000:00:02.1: bridge window [io 0x3800-0x38ff] pci 0000:00:02.1: bridge window [mem 0x28000000-0x2bffffff pref] pci 0000:00:02.1: bridge window [mem 0x2c000000-0x2fffffff] pci 0000:08:02.0: BAR 15: assigned [mem 0x38000000-0x3bffffff pref] pci 0000:08:02.0: BAR 16: assigned [mem 0x30000000-0x33ffffff] pci 0000:08:02.1: BAR 15: assigned [mem 0x3c000000-0x3fffffff pref] pci 0000:08:02.1: BAR 16: assigned [mem 0x34000000-0x37ffffff] pci 0000:08:02.0: BAR 13: assigned [io 0x5000-0x50ff] pci 0000:08:02.0: BAR 14: assigned [io 0x5400-0x54ff] pci 0000:08:02.1: BAR 13: assigned [io 0x5800-0x58ff] pci 0000:08:02.1: BAR 14: assigned [io 0x5c00-0x5cff] pci 0000:09:00.0: BAR 6: assigned [mem 0xd0320000-0xd033ffff pref] pci 0000:08:00.0: PCI bridge to [bus 09-09] pci 0000:08:00.0: bridge window [io 0x4000-0x4fff] pci 0000:08:00.0: bridge window [mem 0xd0300000-0xd03fffff] pci 0000:08:00.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:08:02.0: CardBus bridge to [bus 0a-0d] pci 0000:08:02.0: bridge window [io 0x5000-0x50ff] pci 0000:08:02.0: bridge window [io 0x5400-0x54ff] pci 0000:08:02.0: bridge window [mem 0x38000000-0x3bffffff pref] pci 0000:08:02.0: bridge window [mem 0x30000000-0x33ffffff] pci 0000:08:02.1: CardBus bridge to [bus 0e-11] pci 0000:08:02.1: bridge window [io 0x5800-0x58ff] pci 0000:08:02.1: bridge window [io 0x5c00-0x5cff] pci 0000:08:02.1: bridge window [mem 0x3c000000-0x3fffffff pref] pci 0000:08:02.1: bridge window [mem 0x34000000-0x37ffffff] pci 0000:00:04.0: PCI bridge to [bus 08-0e] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff] pci 0000:00:04.0: bridge window [mem 0x30000000-0x37ffffff] pci 0000:00:04.0: bridge window [mem 0x38000000-0x3fffffff pref] pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:02.1: power state changed by ACPI to D0 pci 0000:00:02.1: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci 0000:08:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd02fffff] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref] pci_bus 0000:12: resource 0 [io 0x1400-0x14ff] pci_bus 0000:12: resource 1 [io 0x1c00-0x1cff] pci_bus 0000:12: resource 2 [mem 0x20000000-0x23ffffff pref] pci_bus 0000:12: resource 3 [mem 0x24000000-0x27ffffff] pci_bus 0000:16: resource 0 [io 0x3400-0x34ff] pci_bus 0000:16: resource 1 [io 0x3800-0x38ff] pci_bus 0000:16: resource 2 [mem 0x28000000-0x2bffffff pref] pci_bus 0000:16: resource 3 [mem 0x2c000000-0x2fffffff] pci_bus 0000:08: resource 0 [io 0x5000-0x5fff] pci_bus 0000:08: resource 1 [mem 0x30000000-0x37ffffff] pci_bus 0000:08: resource 2 [mem 0x38000000-0x3fffffff pref] pci_bus 0000:08: resource 3 [io 0x0000-0xffff] pci_bus 0000:08: resource 4 [mem 0x00000000-0xffffffff] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] pci_bus 0000:09: resource 1 [mem 0xd0300000-0xd03fffff] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xefffffff pref] pci_bus 0000:0a: resource 0 [io 0x5000-0x50ff] pci_bus 0000:0a: resource 1 [io 0x5400-0x54ff] pci_bus 0000:0a: resource 2 [mem 0x38000000-0x3bffffff pref] pci_bus 0000:0a: resource 3 [mem 0x30000000-0x33ffffff] pci_bus 0000:0e: resource 0 [io 0x5800-0x58ff] pci_bus 0000:0e: resource 1 [io 0x5c00-0x5cff] pci_bus 0000:0e: resource 2 [mem 0x3c000000-0x3fffffff pref] pci_bus 0000:0e: resource 3 [mem 0x34000000-0x37ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 32 Unpacking initramfs... Freeing initrd memory: 1695k freed Simple Boot Flag at 0x35 set to 0x1 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1276726299.873:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 998 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ACPI: Device [UART] failed to transition to D0 serial 00:0c: activation failed serial: probe of 00:0c failed with error -5 serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 408k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:07.1: version 2.13 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15 ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33 ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pata_acpi 0000:08:01.0: PCI INT A disabled pata_cmd64x 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 scsi2 : pata_cmd64x scsi3 : pata_cmd64x ata3: PATA max UDMA/66 cmd 0x3020 ctl 0x3014 bmdma 0x3000 irq 11 ata4: PATA max UDMA/66 cmd 0x3018 ctl 0x3010 bmdma 0x3008 irq 11 pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. uvesafb: ATI Technologies Inc., M3 , 01.00, OEM: ATI MOBILE M3, VBE v2.0 uvesafb: protected mode interface info at c000:645a uvesafb: pmi: set display start = c00c64c8, set palette = c00c6502 uvesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4 uvesafb: no monitor limits have been set, default refresh rate will be used uvesafb: scrolling: ypan using protected mode interface, yres_virtual=1638 Console: switching to colour frame buffer device 160x64 uvesafb: framebuffer at 0xd8000000, mapped to 0xe0980000, using 8192k, total 8192k fb0: VESA VGA frame buffer device REISERFS (device sda2): found reiserfs format "3.6" with standard journal REISERFS (device sda2): using ordered data mode REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda2): checking transaction log (sda2) REISERFS (device sda2): Using r5 hash to sort names rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram udev: starting version 157 Linux agpgart interface v0.103 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 input: PC Speaker as /devices/platform/pcspkr/input/input2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (70 C) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Power Button [PWRF] Marking TSC unstable due to TSC halts in idle Switching to clocksource acpi_pm agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xd4000000 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Non-volatile memory driver v1.3 ACPI: AC Adapter [AC] (on-line) Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 ACPI: Battery Slot [BAT0] (battery present) yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: Device [LPT] failed to transition to D0 parport_pc 00:0d: activation failed parport_pc: probe of 00:0d failed with error -5 parport0: PC-style at 0x3bc [PCSPP,TRISTATE] parport0: irq 0 detected yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0438, PCI irq 11 yenta_cardbus 0000:00:02.0: Socket status: 30000006 e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 23 lp0: using parport0 (polling). sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 e100 0000:00:03.0: PME# disabled e100: eth0: e100_probe: addr 0xd0120000, irq 11, MAC addr 00:03:47:0f:de:3d yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66 spurious 8259A interrupt: IRQ7. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [drm] Initialized drm 1.1.0 20060810 yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x04b8, PCI irq 11 yenta_cardbus 0000:00:02.1: Socket status: 30000020 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input6 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) yenta_cardbus 0000:08:02.0: CardBus bridge found [1014:0148] yenta_cardbus 0000:08:02.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:08:02.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:08:02.0: TI: mfunc 0x00001002, devctl 0x66 piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! piix4_smbus: probe of 0000:00:07.3 failed with error -1 ppdev: user-space parallel port driver yenta_cardbus 0000:08:02.0: ISA IRQ mask 0x04b8, PCI irq 11 yenta_cardbus 0000:08:02.0: Socket status: 30000006 yenta_cardbus 0000:08:02.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff pcmcia_socket pcmcia_socket2: cs: IO port probe 0x5000-0x5fff: clean. yenta_cardbus 0000:08:02.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff yenta_cardbus 0000:08:02.0: pcmcia: parent PCI bridge Memory window: 0x38000000 - 0x3fffffff psmouse serio1: ID: 10 00 64 ACPI: Device [FIR] failed to transition to D0 nsc-ircc 00:0e: activation failed nsc-ircc: probe of 00:0e failed with error -5 nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Found dongle: Reserved pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized r128 2.5.0 20030725 for 0000:01:00.0 on minor 0 uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0000ffff] pci 0000:16:00.0: BAR 0: assigned [mem 0x2c000000-0x2c00ffff] pci 0000:16:00.0: BAR 0: set to [mem 0x2c000000-0x2c00ffff] (PCI address [0x2c000000-0x2c00ffff] usb 1-1: new full speed USB device using uhci_hcd and address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected yenta_cardbus 0000:08:02.1: CardBus bridge found [1014:0148] yenta_cardbus 0000:08:02.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:08:02.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:08:02.1: TI: mfunc 0x00001002, devctl 0x66 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7 [drm] radeon kernel modesetting enabled. radeon 0000:09:00.0: enabling device (0004 -> 0007) radeon 0000:09:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 radeon 0000:09:00.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xD0310000 [drm] register mmio size: 65536 yenta_cardbus 0000:08:02.1: ISA IRQ mask 0x04b8, PCI irq 11 yenta_cardbus 0000:08:02.1: Socket status: 30000006 pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #0e to #11 yenta_cardbus 0000:08:02.1: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff pcmcia_socket pcmcia_socket3: cs: IO port probe 0x5000-0x5fff: clean. yenta_cardbus 0000:08:02.1: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff yenta_cardbus 0000:08:02.1: pcmcia: parent PCI bridge Memory window: 0x38000000 - 0x3fffffff thinkpad_acpi: ThinkPad ACPI Extras v0.24 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby thinkpad_acpi: Console audio control enabled, mode: monitor (read only) input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 usb 1-1.4: new low speed USB device using uhci_hcd and address 3 pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket3: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket3: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 pcmcia_socket pcmcia_socket3: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket3: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket3: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. ATOM BIOS: VT [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [drm] GPU not posted. posting now... [drm] Generation 2 PCI interface, using max accessible memory [drm] radeon: VRAM 256M [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 64bits DDR [TTM] Zone kernel: Available graphics memory: 255784 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] RB2D reset succeed (RBBM_STATUS=0x10000140) [drm] radeon: 1 quad pipes, 1 z pipes initialized. [drm] PCIE GART of 512M enabled (table at 0x00040000). [drm] radeon: cp idle (0x10000C03) [drm] Loading R500 Microcode platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 3 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Default TV standard: NTSC [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] HPD2 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] DFP3: INTERNAL_LVTM1 cfg80211: Calling CRDA to update world regulatory domain usbcore: registered new interface driver hiddev input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.4/1-1.4:1.0/input/input9 generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ath5k 0000:16:00.0: enabling device (0000 -> 0002) ath5k 0000:16:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 ath5k 0000:16:00.0: registered as 'phy0' [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz [drm] fb mappable at 0xE00C0000 [drm] vram apper at 0xE0000000 [drm] size 5242880 [drm] fb depth is 24 [drm] pitch is 5120 fb1: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:09:00.0 on minor 1 /proc/exmap: insert usbcore: registered new interface driver usblp ath: EEPROM regdomain: 0x10 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: CO ath: Regpair used: 0x10 phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) cfg80211: Calling CRDA for country: CO EXT2-fs (sda1): warning: mounting ext3 filesystem as ext2 JFS: nTxBlock = 3996, nTxLock = 31973 Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k ondemand governor failed, too long transition latency of HW, fallback to performance governor vgaarb: device changed decodes: PCI:0000:09:00.0,olddecodes=io+mem,decodes=none:owns=none