Linux version 2.6.34-xen-Gentoo-uranus-1-31 (root@uranus) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #4 SMP Tue Jul 6 01:09:46 CEST 2010 Command line: root=/dev/md5 ro odmraid root_=UUID=3ae46540:5da32e75:3b8ef3b3:48c699fd loop.max_part=63 max_part=63 panic=30 quiet_ noresume_ Xen-provided machine memory map: BIOS: 0000000000000000 - 000000000009f800 (usable) BIOS: 000000000009f800 - 00000000000a0000 (reserved) BIOS: 00000000000f0000 - 0000000000100000 (reserved) BIOS: 0000000000100000 - 00000000a7de0000 (usable) BIOS: 00000000a7de0000 - 00000000a7de3000 (ACPI NVS) BIOS: 00000000a7de3000 - 00000000a7df0000 (ACPI data) BIOS: 00000000a7df0000 - 00000000a7e00000 (reserved) BIOS: 00000000e0000000 - 00000000f0000000 (reserved) BIOS: 00000000fec00000 - 0000000100000000 (reserved) BIOS: 0000000100000000 - 0000000150000000 (usable) Xen-provided physical RAM map: Xen: 0000000000000000 - 00000000ec6b3000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. last_pfn = 0xec6b3 max_arch_pfn = 0x80000000 initial memory mapped : 0 - 00000000 found SMP MP-table at [ffffffffff5f18d0] 000f58d0 init_memory_mapping: 0000000000000000-00000000ec6b3000 0000000000 - 00ec6b3000 page 4k kernel direct mapping tables up to ec6b3000 @ ecc000-1635000 ACPI: RSDP 00000000000f7270 00014 (v00 GBT ) ACPI: RSDT 00000000a7de3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000a7de3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000a7de30c0 07299 (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000a7de0000 00040 ACPI: HPET 00000000a7dea440 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000a7dea480 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 00000000a7dea4c0 0030A (v01 GBT GBT B0 5455312E BG?? 53450101) ACPI: APIC 00000000a7dea380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x000ebeb3 0: 0x000ec6b3 -> 0x000ec6b3 On node 0 totalpages: 966323 free_area_init_node: node 0, pgdat ffffffff80d333c0, node_mem_map ffff880001d98000 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 DMA32 zone: 13184 pages used for memmap DMA32 zone: 949043 pages, LIFO batch:31 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information early_res array is doubled to 64 at [0 - 7ff] Allocating PCI resources starting at a7e00000 (gap: a7e00000:38200000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 17 pages/cpu @ffff880001007000 s40808 r8192 d20632 u69632 pcpu-alloc: s40808 r8192 d20632 u69632 alloc=17*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Swapping MFNs for PFN d4d and 100e (MFN 14bd4d and 14c00c) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 953083 Kernel command line: root=/dev/md5 ro odmraid root_=UUID=3ae46540:5da32e75:3b8ef3b3:48c699fd loop.max_part=63 max_part=63 panic=30 quiet_ noresume_ PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Software IO TLB enabled: Aperture: 64 megabytes Address size: 27 bits Kernel range: ffff8800058d4000 - ffff8800098d4000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Subtract (51 early reservations) #1 [0000ec0000 - 0000ecc000] Xen provided #2 [0000100000 - 0000e9f5f4] TEXT DATA BSS #3 [0000ea0000 - 0000ea00fe] BRK #4 [0000ecc000 - 0001000000] PGTABLE #5 [0001763000 - 0001d98000] PGTABLE #6 [00ebeb3000 - 00ec6b3000] BALLOON #7 [0001d98000 - 0005154000] BOOTMEM #8 [0005154000 - 0005154008] BOOTMEM #9 [0005154040 - 00051541c0] BOOTMEM #10 [00051541c0 - 0005154328] BOOTMEM #11 [0005154340 - 000516c340] BOOTMEM #12 [000516d000 - 000516e000] BOOTMEM #13 [000516e000 - 000516f000] BOOTMEM #14 [000516f000 - 0005170000] BOOTMEM #15 [000516c340 - 000516c420] BOOTMEM #16 [0005170000 - 00058d3598] BOOTMEM #17 [0001000000 - 0001000028] BOOTMEM #18 [0001000040 - 0001000060] BOOTMEM #19 [0001001000 - 0001002000] BOOTMEM #20 [0001002000 - 0001003000] BOOTMEM #21 [0001003000 - 0001004000] BOOTMEM #22 [0001004000 - 0001005000] BOOTMEM #23 [0001000080 - 00010002b0] BOOTMEM #24 [00010002c0 - 0001000328] BOOTMEM #25 [0001000340 - 00010003a8] BOOTMEM #26 [00010003c0 - 0001000428] BOOTMEM #27 [0001000440 - 00010004a8] BOOTMEM #28 [00010004c0 - 0001000528] BOOTMEM #29 [0001000540 - 00010005a8] BOOTMEM #30 [00010005c0 - 0001000628] BOOTMEM #31 [0001000640 - 00010006a8] BOOTMEM #32 [00010006c0 - 0001000728] BOOTMEM #33 [0001000740 - 00010007a8] BOOTMEM #34 [00010007c0 - 0001000843] BOOTMEM #35 [0001000880 - 0001000903] BOOTMEM #36 [0001007000 - 000104b000] BOOTMEM #37 [0001000940 - 0001000948] BOOTMEM #38 [0001000980 - 0001000988] BOOTMEM #39 [00010009c0 - 00010009d0] BOOTMEM #40 [0001000a00 - 0001000a20] BOOTMEM #41 [0001000a40 - 0001000b40] BOOTMEM #42 [0001000b40 - 0001000b88] BOOTMEM #43 [0001000bc0 - 0001000c08] BOOTMEM #44 [000104b000 - 0001053000] BOOTMEM #45 [0001053000 - 0001453000] BOOTMEM #46 [0001453000 - 0001653000] BOOTMEM #47 [00058d4000 - 00098d4000] BOOTMEM #48 [0001653000 - 0001673000] BOOTMEM #49 [0001673000 - 00016b3000] BOOTMEM #50 [00016b3000 - 00016bb000] BOOTMEM Memory: 3710624k/3873484k available (8247k kernel code, 8192k absent, 154668k reserved, 4315k data, 472k init) Hierarchical RCU implementation. NR_IRQS:704 Xen reported: 3415.530 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [xvc-1] enabled Calibrating delay using timer specific routine.. 6845.20 BogoMIPS (lpj=3422600) Mount-cache hash table entries: 256 mce: CPU supports 6 MCE banks SMP alternatives: switching to UP code ACPI: Core revision 20100121 SMP alternatives: switching to SMP code Brought up 4 CPUs xor: automatically using best checksumming function: generic_sse generic_sse: 10284.000 MB/sec xor: using function: generic_sse (10284.000 MB/sec) regulator: core version 0.5 NET: Registered protocol family 16 node 0 link 0: io port [a000, ffff] TOM: 00000000b0000000 aka 2816M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [b0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff] TOM2: 0000000150000000 aka 5376M bus: [00, 05] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x000a0000-0x000bffff] bus: 00 index 2 [mem 0xb0000000-0xdfffffff] bus: 00 index 3 [mem 0xe0600000-0xffffffff] bus: 00 index 4 [mem 0xe0100000-0xe05fffff] bus: 00 index 5 [mem 0x150000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xaff00000-0xfebfffff] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref] pci 0000:01:05.0: reg 14: [io 0xce00-0xceff] pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff] pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff] pci 0000:01:05.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xfdce0000-0xfdceffff 64bit] pci 0000:02:00.0: reg 20: [io 0xbe00-0xbeff] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.1: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit] pci 0000:02:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 02-02] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:03:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:03:00.0: reg 18: [mem 0xfdbe0000-0xfdbeffff 64bit] pci 0000:03:00.0: reg 20: [io 0xee00-0xeeff] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.1: reg 10: [mem 0xfdbfc000-0xfdbfffff 64bit] pci 0000:03:00.1: supports D1 D2 pci 0000:00:04.0: PCI bridge to [bus 03-03] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff] pci 0000:04:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] pci 0000:04:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:0a.0: PCI bridge to [bus 04-04] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:05:0e.0: reg 10: [mem 0xfdaff000-0xfdaff7ff] pci 0000:05:0e.0: reg 14: [mem 0xfdaf8000-0xfdafbfff] pci 0000:05:0e.0: supports D1 D2 pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:0e.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xa000-0xafff] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xaff00000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=none,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded xen_mem: Initialising balloon driver. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 3222 MB/s raid6: int64x2 3582 MB/s raid6: int64x4 2933 MB/s raid6: int64x8 2492 MB/s raid6: sse2x1 4265 MB/s raid6: sse2x2 6980 MB/s raid6: sse2x4 7277 MB/s raid6: using algorithm sse2x4 (7277 MB/s) Advanced Linux Sound Architecture Driver Version 1.0.22.1. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 00000000a7de0000 - 00000000a7ffffff Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized NET: Registered protocol family 8 NET: Registered protocol family 20 cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] pnp 00:0c: disabling [mem 0x000d2c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x00100000-0xa7ddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0220-0x0225] has been reserved system 00:01: [io 0x0290-0x0294] has been reserved system 00:02: [io 0x4100-0x411f] has been reserved system 00:02: [io 0x0228-0x022f] has been reserved system 00:02: [io 0x040b] has been reserved system 00:02: [io 0x04d6] has been reserved system 00:02: [io 0x0c00-0x0c01] has been reserved system 00:02: [io 0x0c14] has been reserved system 00:02: [io 0x0c50-0x0c52] has been reserved system 00:02: [io 0x0c6c-0x0c6d] has been reserved system 00:02: [io 0x0c6f] has been reserved system 00:02: [io 0x0cd0-0x0cd1] has been reserved system 00:02: [io 0x0cd2-0x0cd3] has been reserved system 00:02: [io 0x0cd4-0x0cdf] has been reserved system 00:02: [io 0x4000-0x40fe] has been reserved system 00:02: [io 0x4210-0x4217] has been reserved system 00:02: [io 0x0b00-0x0b0f] has been reserved system 00:02: [io 0x0b10-0x0b1f] has been reserved system 00:02: [io 0x0b20-0x0b3f] has been reserved system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0c: [mem 0xa7de0000-0xa7dfffff] could not be reserved system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved system 00:0c: [mem 0xa7ef0000-0xafeeffff] could not be reserved system 00:0c: [mem 0xfec00000-0xfec00fff] has been reserved system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] pci 0000:00:02.0: PCI bridge to [bus 02-02] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref] pci 0000:00:04.0: PCI bridge to [bus 03-03] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref] pci 0000:00:0a.0: PCI bridge to [bus 04-04] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 05-05] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xaff00000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 1 [mem 0xfd800000-0xfd8fffff] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff pref] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:05: resource 8 [mem 0xaff00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:02:00.0: Boot video device PCI: CLS 4 bytes, default 64 MCE: bind virq for DOM0 logging MCE_DOM0_LOG: enter dom0 mce vIRQ handler MCE_DOM0_LOG: No more urgent data MCE_DOM0_LOG: No more nonurgent data audit: initializing netlink socket (disabled) type=2000 audit(1278517629.743:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ROMFS MTD (C) 2007 Red Hat, Inc. fuse init (API version 7.13) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 7549 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 lp: driver loaded but no devices found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M floppy0: Unable to grab DMA2 for the floppy driver FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded nbd: registered device at major 43 Xen virtual console successfully installed as xvc0 Event-channel device installed. blktap_device_init: blktap device major 252 blktap_ring_init: blktap ring major: 251 netfront: Initialising virtual ethernet driver. usbcore: registered new interface driver usbback Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 SCSI Media Changer driver v0.25 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi6 : pata_atiixp scsi7 : pata_atiixp ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 parport0: AVR Butterfly parport0: cannot grant exclusive access for device spi-lm70llp spi-lm70llp: spi_lm70llp probe fail, status -12 Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 Copyright (c) 2007-2009 Intel Corporation. Intel(R) Virtual Function Network Driver - version 1.0.0-k0 Copyright (c) 2009 Intel Corporation. bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. Atheros(R) L2 Ethernet Driver - version 2.2.3 Copyright (c) 2007 Atheros Corporation. jme: JMicron JMC2XX ethernet driver version 1.0.6 NET3 PLIP version 2.4-parport gniibe@mri.co.jp plip0: Parallel port at 0x378, using IRQ 7. pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ThunderLAN driver v1.15a TLAN: 0 devices installed, PCI: 0 EISA: 0 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.1 (Feb 22, 2010) sky2: driver version 1.27 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: irq 383 (255) for MSI/MSI-X r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90010736000, 6c:f0:49:02:21:9b, XID 1c4000c0 IRQ 383 usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver cdc_phonet usbcore: registered new interface driver rt73usb firewire_ohci 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ata7.01: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.05, max UDMA/33 ata7.01: configured for UDMA/33 firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 ieee1394: raw1394: /dev/raw1394 device initialized aoe: AoE v47 initialised. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: ATA-8: ST31000340AS, SD15, max UDMA/133 ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata2.00: configured for UDMA/133 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat usbcore: registered new interface driver usbserial USB Serial support registered for generic scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: scsi 3:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: scsi 6:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4521B 1.05 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:1:0: Attached scsi CD-ROM sr0 sr 6:0:1:0: Attached scsi generic sg4 type 5 usb 1-1: new high speed USB device using ehci_hcd and address 2 sda1 sda2 sda3 sda4 < sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2 sdb3 sdb4 < sdd1 sdd2 sdd3 sdd4 < sda5 sdd5 sdb5 sda6 sdc5 sdd6 sda7 sdc6 sdb6 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk sdd7 sdc7 sdd8 > sdb7 sd 3:0:0:0: [sdd] Attached SCSI disk sdc8 > sd 2:0:0:0: [sdc] Attached SCSI disk sdb8 > sd 1:0:0:0: [sdb] Attached SCSI disk firewire_core: created device fw0: GUID 00e5d98e0000241d, S400 usb 3-2: new low speed USB device using ohci_hcd and address 2 usb 3-3: new full speed USB device using ohci_hcd and address 3 usb 5-1: new full speed USB device using ohci_hcd and address 2 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 3 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 4 usb 5-1: device not accepting address 4, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 5 usb 5-1: device not accepting address 5, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter usbcore: registered new interface driver belkin belkin_sa: v1.2:USB Belkin Serial converter driver USB Serial support registered for hp4X usbcore: registered new interface driver hp4X hp4x: v1.00:HP4x (48/49) Generic Serial driver USB Serial support registered for IR Dongle usbcore: registered new interface driver ir-usb ir_usb: v0.4:USB IR Dongle driver USB Serial support registered for MCT U232 usbcore: registered new interface driver mct_u232 mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver USB Serial support registered for navman usbcore: registered new interface driver navman USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver USB Serial support registered for TI USB 3410 1 port adapter USB Serial support registered for TI USB 5052 2 port adapter usbcore: registered new interface driver ti_usb_3410_5052 ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver USB Serial support registered for Keyspan PDA USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) usbcore: registered new interface driver keyspan_pda keyspan_pda: v1.1:USB Keyspan PDA Converter driver usbcore: registered new interface driver usblcd usbcore: registered new interface driver usbled usbcore: registered new interface driver legousbtower legousbtower: v0.96:LEGO USB Tower Driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram rtc-test rtc-test.0: rtc core: registered test as rtc1 rtc-test rtc-test.1: rtc core: registered test as rtc2 i2c /dev entries driver ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0x0b00-0x0b0f 64bit window] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver i2c-parport: adapter type unspecified i2c-parport-light: adapter type unspecified usbcore: registered new interface driver i2c-tiny-usb Driver for 1-wire Dallas network protocol. hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! it87: Found IT8718F chip at 0x228, revision 8 it87: in3 is VCC (+5V) it87: Beeping is supported md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Bluetooth: Virtual HCI driver ver 1.3 EDAC MC: Ver: 2.1.0 Jun 25 2010 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) padlock: VIA PadLock not detected. padlock: VIA PadLock Hash Engine not detected. HIFN supports only 32-bit addresses. usbip_common_mod: usbip common driver1.0 vhci_hcd: vhci_hcd, 1.0 usbip: proving... vhci_hcd vhci_hcd: USB/IP Virtual Host Controller vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 8 hub 8-0:1.0: USB hub found hub 8-0:1.0: 8 ports detected usbip 1-1:1.0: this device 1-1 is not in match_busid table. skip! usbip 3-2:1.0: this device 3-2 is not in match_busid table. skip! usbip 3-2:1.1: this device 3-2 is not in match_busid table. skip! usbip 3-3:1.0: this device 3-3 is not in match_busid table. skip! usbip 3-3:1.1: this device 3-3 is not in match_busid table. skip! usbcore: registered new interface driver usbip usbip:Stub Driver for USB/IP:1.0 no UART detected at 0x1 snd_portman2x4: probe of snd_portman2x4.0 failed with error -5 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_codec: ALC889A: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3 HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:05.1: setting latency timer to 64 HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:02:00.1: irq 382 (254) for MSI/MSI-X HDA Intel 0000:02:00.1: setting latency timer to 64 HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:03:00.1: irq 381 (253) for MSI/MSI-X HDA Intel 0000:03:00.1: setting latency timer to 64 usbcore: registered new interface driver snd-usb-audio usbcore: registered new interface driver snd-usb-usx2y usbcore: registered new interface driver snd-usb-us122l usbcore: registered new interface driver snd-usb-caiaq No device for DAI AD73311 Asahi Kasei AK4104 ALSA SoC Codec Driver No device for DAI AK4535 Cirrus Logic CS4270 ALSA SoC Codec Driver No device for DAI PCM3008 HiFi No device for DAI SSM2602 No device for DAI tlv320aic23 No device for DAI UDA134X No device for DAI WM8510 HiFi No device for DAI WM8728 No device for DAI WM8750 No device for DAI WM8971 No device for DAI WM8990 ADC/DAC Primary ALSA device list: #0: HDA ATI SB at 0xfe024000 irq 16 #1: HDA ATI HDMI at 0xfdefc000 irq 19 #2: HDA ATI HDMI at 0xfdcfc000 irq 382 #3: HDA ATI HDMI at 0xfdbfc000 irq 381 xenoprofile_init: ret 0, events 4, xenoprof_is_primary 1 pktgen 2.72: Packet Generator for packet performance testing. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=64Kbytes) IPVS: ipvs loaded. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP bic registered TCP cubic registered TCP westwood registered TCP highspeed registered TCP htcp registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 lec:lane_module_init: lec.c: Jul 5 2010 22:57:20 initialized mpoa:atm_mpoa_init: mpc.c: Jul 5 2010 22:57:17 initialized NET: Registered protocol family 35 PCI IO multiplexer device installed. rtc_cmos 00:05: setting system clock to 2010-07-07 15:47:13 UTC (1278517633) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 20 and added 20 devices. md: autorun ... md: considering sdb8 ... md: adding sdb8 ... md: sdb7 has different UUID to sdb8 md: sdb6 has different UUID to sdb8 md: sdb5 has different UUID to sdb8 md: sdb3 has different UUID to sdb8 md: adding sdc8 ... md: sdc7 has different UUID to sdb8 md: sdc6 has different UUID to sdb8 md: sdc5 has different UUID to sdb8 md: sdc3 has different UUID to sdb8 md: adding sdd8 ... md: sdd7 has different UUID to sdb8 md: sdd6 has different UUID to sdb8 md: sdd5 has different UUID to sdb8 md: sdd3 has different UUID to sdb8 md: adding sda8 ... md: sda7 has different UUID to sdb8 md: sda6 has different UUID to sdb8 md: sda5 has different UUID to sdb8 md: sda3 has different UUID to sdb8 md: created md8 md: bind md: bind md: bind md: bind md: running: raid5: device sdb8 operational as raid disk 1 raid5: device sdc8 operational as raid disk 2 raid5: device sdd8 operational as raid disk 3 raid5: device sda8 operational as raid disk 0 raid5: allocated 4272kB for md8 1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md8 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda8 disk 1, o:1, dev:sdb8 disk 2, o:1, dev:sdc8 disk 3, o:1, dev:sdd8 md8: detected capacity change from 0 to 2661437079552 md: considering sdb7 ... md: adding sdb7 ... md: sdb6 has different UUID to sdb7 md: sdb5 has different UUID to sdb7 md: sdb3 has different UUID to sdb7 md: adding sdc7 ... md: sdc6 has different UUID to sdb7 md: sdc5 has different UUID to sdb7 md: sdc3 has different UUID to sdb7 md: adding sdd7 ... md: sdd6 has different UUID to sdb7 md: sdd5 has different UUID to sdb7 md: sdd3 has different UUID to sdb7 md: adding sda7 ... md: sda6 has different UUID to sdb7 md: sda5 has different UUID to sdb7 md: sda3 has different UUID to sdb7 md: created md7 md: bind md: bind md: bind md: bind md: running: raid5: device sdb7 operational as raid disk 1 raid5: device sdc7 operational as raid disk 2 raid5: device sdd7 operational as raid disk 3 raid5: device sda7 operational as raid disk 0 raid5: allocated 4272kB for md7 1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md7 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda7 disk 1, o:1, dev:sdb7 disk 2, o:1, dev:sdc7 disk 3, o:1, dev:sdd7 md7: detected capacity change from 0 to 150028812288 md: considering sdb6 ... md: adding sdb6 ... md: sdb5 has different UUID to sdb6 md: sdb3 has different UUID to sdb6 md: adding sdc6 ... md: sdc5 has different UUID to sdb6 md: sdc3 has different UUID to sdb6 md: adding sdd6 ... md: sdd5 has different UUID to sdb6 md: sdd3 has different UUID to sdb6 md: adding sda6 ... md: sda5 has different UUID to sdb6 md: sda3 has different UUID to sdb6 md: created md6 md: bind md: bind md: bind md: bind md: running: raid5: device sdb6 operational as raid disk 1 raid5: device sdc6 operational as raid disk 2 raid5: device sdd6 operational as raid disk 3 raid5: device sda6 operational as raid disk 0 raid5: allocated 4272kB for md6 1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md6 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda6 disk 1, o:1, dev:sdb6 disk 2, o:1, dev:sdc6 disk 3, o:1, dev:sdd6 md6: detected capacity change from 0 to 90017169408 md: considering sdb5 ... md: adding sdb5 ... md: sdb3 has different UUID to sdb5 md: adding sdc5 ... md: sdc3 has different UUID to sdb5 md: adding sdd5 ... md: sdd3 has different UUID to sdb5 md: adding sda5 ... md: sda3 has different UUID to sdb5 md: created md5 md: bind md: bind md: bind md: bind md: running: raid5: device sdb5 operational as raid disk 1 raid5: device sdc5 operational as raid disk 2 raid5: device sdd5 operational as raid disk 3 raid5: device sda5 operational as raid disk 0 raid5: allocated 4272kB for md5 1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 2: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 3: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 0: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 raid5: raid level 5 set md5 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda5 disk 1, o:1, dev:sdb5 disk 2, o:1, dev:sdc5 disk 3, o:1, dev:sdd5 md5: detected capacity change from 0 to 30030102528 md: considering sdb3 ... md: adding sdb3 ... md: adding sdc3 ... md: adding sdd3 ... md: adding sda3 ... md: created md3 md: bind md: bind md: bind md: bind md: running: raid0: looking at sdb3 raid0: comparing sdb3(3919616) with sdb3(3919616) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sdc3 raid0: comparing sdc3(3919616) with sdb3(3919616) raid0: EQUAL raid0: looking at sdd3 raid0: comparing sdd3(3919616) with sdb3(3919616) raid0: EQUAL raid0: looking at sda3 raid0: comparing sda3(3919616) with sdb3(3919616) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 15678464 sectors. ******* md3 configuration ********* zone0=[sda3/sdb3/sdc3/sdd3/] zone offset=0kb device offset=0kb size=7839232kb ********************************** md3: detected capacity change from 0 to 8027373568 md: ... autorun DONE. md5: unknown partition table EXT3-fs (md5): error: couldn't mount because of unsupported optional features (240) EXT2-fs (md5): error: couldn't mount because of unsupported optional features (240) EXT4-fs (md5): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 9:5. Freeing unused kernel memory: 472k freed udev: starting version 149 input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4 generic-usb 0003:045E:0730.0001: input: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:12.0-2/input0 input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input5 generic-usb 0003:045E:0730.0002: input: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:12.0-2/input1 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input6 generic-usb 0003:046D:C525.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input7 generic-usb 0003:046D:C525.0004: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver [drm] Initialized drm 1.1.0 20060810 md3: md7: md6: md8: unknown partition table unknown partition table unknown partition table unknown partition table [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: enabling device (0006 -> 0007) radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] initializing kernel modesetting (RS880 0x1002:0x9710). [drm] register mmio base: 0xFDEE0000 [drm] register mmio size: 65536 ATOM BIOS: B43106_DVI [drm] Clocks initialized ! [drm] 1 Power State(s) [drm] State 0 Default (default) [drm] 1 Clock Mode(s) [drm] 0 engine: 500000 [drm] radeon: power management initialized radeon 0000:01:05.0: VRAM: 128M 0xC0000000 - 0xC7FFFFFF (128M used) radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 1920978 kiB. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RS780 Microcode platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support [drm] Unknown TV standard; defaulting to NTSC [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] DVI-D [drm] HPD1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP1: INTERNAL_KLDSCP_LVTMA [drm] fb mappable at 0xD8141000 [drm] vram apper at 0xD8000000 [drm] size 5242880 [drm] fb depth is 24 [drm] pitch is 5120 Console: switching to colour frame buffer device 160x64 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.3.0 20080528 for 0000:01:05.0 on minor 0 radeon 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:02:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (RV710 0x1002:0x954F). [drm] register mmio base: 0xFDCE0000 [drm] register mmio size: 65536 ATOM BIOS: 113 [drm] Clocks initialized ! [drm] Internal thermal controller with fan control [drm] 4 Power State(s) [drm] State 0 Default (default) [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 600000/400000 [drm] 1 engine/memory: 600000/400000 [drm] 2 engine/memory: 600000/400000 [drm] State 1 Performance [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 110000/250000 [drm] 1 engine/memory: 300000/400000 [drm] 2 engine/memory: 600000/400000 [drm] State 2 Default [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 600000/400000 [drm] 1 engine/memory: 600000/400000 [drm] 2 engine/memory: 600000/400000 [drm] State 3 Performance [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 110000/400000 [drm] 1 engine/memory: 300000/400000 [drm] 2 engine/memory: 600000/400000 [drm] radeon: power management initialized radeon 0000:02:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used) radeon 0000:02:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 64bits DDR [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 380 (252) for MSI/MSI-X [drm] radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RV710 Microcode platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support [drm] Default TV standard: PAL [drm] Default TV standard: PAL [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] HDMI-A [drm] HPD1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] Connector 2: [drm] DVI-I [drm] HPD4 [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_UNIPHY2 [drm] fb mappable at 0xB0141000 [drm] vram apper at 0xB0000000 [drm] size 5242880 [drm] fb depth is 24 [drm] pitch is 5120 fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.3.0 20080528 for 0000:02:00.0 on minor 1 radeon 0000:03:00.0: enabling device (0000 -> 0003) radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:03:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (RV710 0x1002:0x954F). [drm] register mmio base: 0xFDBE0000 [drm] register mmio size: 65536 ATOM BIOS: 113 [drm] GPU not posted. posting now... [drm] Clocks initialized ! [drm] Internal thermal controller with fan control [drm] 4 Power State(s) [drm] State 0 Default (default) [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 600000/400000 [drm] 1 engine/memory: 600000/400000 [drm] 2 engine/memory: 600000/400000 [drm] State 1 Performance [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 110000/250000 [drm] 1 engine/memory: 300000/400000 [drm] 2 engine/memory: 600000/400000 [drm] State 2 Default [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 600000/400000 [drm] 1 engine/memory: 600000/400000 [drm] 2 engine/memory: 600000/400000 [drm] State 3 Performance [drm] 16 PCIE Lanes [drm] 3 Clock Mode(s) [drm] 0 engine/memory: 110000/400000 [drm] 1 engine/memory: 300000/400000 [drm] 2 engine/memory: 600000/400000 [drm] radeon: power management initialized radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used) radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 64bits DDR [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:03:00.0: irq 379 (251) for MSI/MSI-X [drm] radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RV710 Microcode platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support [drm] Unknown TV standard; defaulting to NTSC [drm] Unknown TV standard; defaulting to NTSC [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] HDMI-A [drm] HPD1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] Connector 2: [drm] DVI-I [drm] HPD4 [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_UNIPHY2 [drm] fb mappable at 0xC0141000 [drm] vram apper at 0xC0000000 [drm] size 3145728 [drm] fb depth is 24 [drm] pitch is 4096 fb2: radeondrmfb frame buffer device [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 2 loop0: EXT4-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (loop0): mounted filesystem with ordered data mode EXT4-fs (md6): mounted filesystem with ordered data mode EXT4-fs (md8): mounted filesystem with ordered data mode r8169 0000:04:00.0: eth0: link up r8169 0000:04:00.0: eth0: link up Adding 7839228k swap on /dev/md3. Priority:-1 extents:1 across:7839228k r8169 0000:04:00.0: peth0: link up device peth0 entered promiscuous mode suspend: event channel 44 eth0: port 1(peth0) entering forwarding state peth0: no IPv6 routers present vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem vgaarb: transferring owner from PCI:0000:02:00.0 to PCI:0000:01:05.0 vgaarb: device changed decodes: PCI:0000:01:05.0,olddecodes=io+mem,decodes=none:owns=io+mem [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [drm:drm_mode_getfb] *ERROR* invalid framebuffer id