Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.35-rc4-nouveau+ (root@mako) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #3 SMP Thu Jul 8 13:21:59 CEST 2010 Command line: drm.debug=1 nouveau.reg_debug=0x200 real_root=/dev/sda5 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d400 (usable) BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable) BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved) BIOS-e820: 00000000bf8a7000 - 00000000bf9bc000 (usable) BIOS-e820: 00000000bf9bc000 - 00000000bfa0f000 (reserved) BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable) BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved) BIOS-e820: 00000000bfd0f000 - 00000000bfd19000 (usable) BIOS-e820: 00000000bfd19000 - 00000000bfd1f000 (reserved) BIOS-e820: 00000000bfd1f000 - 00000000bfd63000 (usable) BIOS-e820: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS) BIOS-e820: 00000000bfd9f000 - 00000000bfde5000 (usable) BIOS-e820: 00000000bfde5000 - 00000000bfdff000 (ACPI data) BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 100000000 mask FC0000000 write-back 3 base 0FFE00000 mask FFFE00000 write-protect 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbfe00 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f7480] f7480 init_memory_mapping: 0000000000000000-00000000bfe00000 0000000000 - 00bfe00000 page 2M kernel direct mapping tables up to bfe00000 @ 16000-1a000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 18000-1e000 RAMDISK: 35b3b000 - 37ff0000 ACPI: RSDP 00000000000f7300 00024 (v02 PTLTD ) ACPI: XSDT 00000000bfdf7627 0005C (v01 MEDION MEDIONAG 06040000 ZNEB 00000000) ACPI: FACP 00000000bfde7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 00000000bfde8000 07563 (v02 WS M08B1___ 06040000 MSFT 03000000) ACPI: FACS 00000000bfd9efc0 00040 ACPI: HPET 00000000bfdfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 00000000bfdfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: SLIC 00000000bfdfedfa 00176 (v01 MEDION MEDIONAG 06040000 BENZ 00000001) ACPI: APIC 00000000bfdfef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 00000000bfdfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SSDT 00000000bfde6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Initmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [0000000100000000 - 0000000100013fff] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[9] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x000bf8a1 0: 0x000bf8a7 -> 0x000bf9bc 0: 0x000bfa0f -> 0x000bfb08 0: 0x000bfd0f -> 0x000bfd19 0: 0x000bfd1f -> 0x000bfd63 0: 0x000bfd9f -> 0x000bfde5 0: 0x000bfdff -> 0x000bfe00 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1047249 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3925 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 766844 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [19000 - 197ff] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000 PM: Registered nosave memory: 00000000bf9bc000 - 00000000bfa0f000 PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000 PM: Registered nosave memory: 00000000bfd19000 - 00000000bfd1f000 PM: Registered nosave memory: 00000000bfd63000 - 00000000bfd9f000 PM: Registered nosave memory: 00000000bfde5000 - 00000000bfdff000 PM: Registered nosave memory: 00000000bfe00000 - 0000000100000000 Allocating PCI resources starting at bfe00000 (gap: bfe00000:40200000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 early_res array is doubled to 128 at [19800 - 1a7ff] PERCPU: Embedded 29 pages/cpu @ffff880002000000 s89856 r8192 d20736 u1048576 pcpu-alloc: s89856 r8192 d20736 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029329 Policy zone: Normal Kernel command line: drm.debug=1 nouveau.reg_debug=0x200 real_root=/dev/sda5 PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Subtract (69 early reservations) #1 [0001000000 - 0001dc8e68] TEXT DATA BSS #2 [0035b3b000 - 0037ff0000] RAMDISK #3 [0001dc9000 - 0001dc9198] BRK #4 [00000f7490 - 0000100000] BIOS reserved #5 [00000f7480 - 00000f7490] MP-table mpf #6 [000009d400 - 000009d971] BIOS reserved #7 [000009db15 - 00000f7480] BIOS reserved #8 [000009d971 - 000009db15] MP-table mpc #9 [0000010000 - 0000012000] TRAMPOLINE #10 [0000012000 - 0000016000] ACPI WAKEUP #11 [0000016000 - 0000018000] PGTABLE #12 [0000018000 - 0000019000] PGTABLE #13 [0100000000 - 0100014000] NODE_DATA #14 [0001dc91c0 - 0001dca1c0] BOOTMEM #15 [0100014000 - 0100014300] BOOTMEM #16 [0100015000 - 0100016000] BOOTMEM #17 [0100016000 - 0100017000] BOOTMEM #18 [0100200000 - 0103a00000] MEMMAP 0 #19 [0001dca1c0 - 0001de21c0] BOOTMEM #20 [0001de21c0 - 0001dfa1c0] BOOTMEM #21 [0001dfa1c0 - 0001e121c0] BOOTMEM #22 [0001e13000 - 0001e14000] BOOTMEM #23 [0001dc8e80 - 0001dc8ec1] BOOTMEM #24 [0001dc8f00 - 0001dc8f43] BOOTMEM #25 [0001e121c0 - 0001e125e8] BOOTMEM #26 [0001dc8f80 - 0001dc8fe8] BOOTMEM #27 [0001e12600 - 0001e12668] BOOTMEM #28 [0001e12680 - 0001e126e8] BOOTMEM #29 [0001e12700 - 0001e12768] BOOTMEM #30 [0001e12780 - 0001e127e8] BOOTMEM #31 [0001e12800 - 0001e12868] BOOTMEM #32 [0001e12880 - 0001e128e8] BOOTMEM #33 [0001e12900 - 0001e12968] BOOTMEM #34 [0001e12980 - 0001e129e8] BOOTMEM #35 [0001e12a00 - 0001e12a68] BOOTMEM #36 [0001e12a80 - 0001e12ae8] BOOTMEM #37 [0001e12b00 - 0001e12b68] BOOTMEM #38 [0001e12b80 - 0001e12be8] BOOTMEM #39 [0001e12c00 - 0001e12c68] BOOTMEM #40 [0001e12c80 - 0001e12ce8] BOOTMEM #41 [0001e12d00 - 0001e12d68] BOOTMEM #42 [0001e12d80 - 0001e12de8] BOOTMEM #43 [0001e12e00 - 0001e12e68] BOOTMEM #44 [0001e12e80 - 0001e12ea0] BOOTMEM #45 [0001e12ec0 - 0001e12ee0] BOOTMEM #46 [0001e12f00 - 0001e12f20] BOOTMEM #47 [0001e12f40 - 0001e12f60] BOOTMEM #48 [0001e12f80 - 0001e12fa0] BOOTMEM #49 [0001e12fc0 - 0001e12fe0] BOOTMEM #50 [0001e14000 - 0001e14020] BOOTMEM #51 [0001e14040 - 0001e14060] BOOTMEM #52 [0001e14080 - 0001e140b8] BOOTMEM #53 [0001e140c0 - 0001e140f8] BOOTMEM #54 [0002000000 - 000201d000] BOOTMEM #55 [0002100000 - 000211d000] BOOTMEM #56 [0001e16100 - 0001e16108] BOOTMEM #57 [0001e16140 - 0001e16148] BOOTMEM #58 [0001e16180 - 0001e16188] BOOTMEM #59 [0001e161c0 - 0001e161d0] BOOTMEM #60 [0001e16200 - 0001e16340] BOOTMEM #61 [0001e16340 - 0001e163a0] BOOTMEM #62 [0001e163c0 - 0001e16420] BOOTMEM #63 [0001e16440 - 0001e1e440] BOOTMEM #64 [0001e14100 - 0001e14340] BOOTMEM #65 [000211d000 - 000611d000] BOOTMEM #66 [0001e1e440 - 0001e3e440] BOOTMEM #67 [0001e3e440 - 0001e7e440] BOOTMEM #68 [000001a800 - 0000022800] BOOTMEM Memory: 4013292k/5242880k available (4626k kernel code, 1053884k absent, 175704k reserved, 7171k data, 732k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:16640 nr_irqs:512 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2194.438 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.87 BogoMIPS (lpj=2194438) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100428 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz stepping 0a Booting Node 0, Processors #1 Ok. Brought up 2 CPUs Total of 2 processors activated (8777.63 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 Time: 13:49:11 Date: 07/12/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000bfd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000bfd19620 00581 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00581 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: SSDT 00000000bfd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 00000000bfd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources CPU0: Temperature above threshold, cpu clock throttled (total events = 1) Disabling lock debugging due to kernel taint CPU0: Temperature/speed normal ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] DMAR: Forcing write-buffer flush capability DMAR: Disabling IOMMU for graphics on this chipset pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f] pci 0000:00:1a.7: reg 10: [mem 0xf3404800-0xf3404bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf3400000-0xf3403fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1d.7: reg 10: [mem 0xf3404c00-0xf3404fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df] pci 0000:00:1f.2: reg 24: [mem 0xf3404000-0xf34047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf3001fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff] pci 0000:03:00.0: reg 18: [mem 0xf3100000-0xf3100fff 64bit] pci 0000:03:00.0: reg 20: [mem 0xf8000000-0xf800ffff 64bit pref] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-04] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.3: PCI bridge to [bus 05-06] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff] pci 0000:00:1c.3: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 08-08] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI Warning for \_SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20100428/nspredef-456) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d400 - 000000000009ffff reserve RAM buffer: 00000000bf8a1000 - 00000000bfffffff reserve RAM buffer: 00000000bf9bc000 - 00000000bfffffff reserve RAM buffer: 00000000bfb08000 - 00000000bfffffff reserve RAM buffer: 00000000bfd19000 - 00000000bfffffff reserve RAM buffer: 00000000bfd63000 - 00000000bfffffff reserve RAM buffer: 00000000bfde5000 - 00000000bfffffff reserve RAM buffer: 00000000bfe00000 - 00000000bfffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: [io 0x0480-0x048f] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x1180-0x11ff] has been reserved system 00:05: [io 0xfe00] has been reserved system 00:05: [mem 0xff800000-0xff800fff] has been reserved system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0200000-0xc03fffff] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0600000-0xc07fffff] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0a00000-0xc0a000ff 64bit] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0a00000-0xc0a000ff 64bit] (PCI address [0xc0a00000-0xc0a000ff] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-04] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.2: bridge window [mem 0xc0200000-0xc03fffff] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 05-06] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff] pci 0000:00:1c.3: bridge window [mem 0xf6000000-0xf7ffffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 08-08] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff] pci 0000:00:1c.4: bridge window [mem 0xc0800000-0xc09fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: resource 12 [mem 0xc0000000-0xdfffffff] pci_bus 0000:00: resource 13 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf30fffff] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff] pci_bus 0000:03: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] pci_bus 0000:04: resource 1 [mem 0xc0200000-0xc03fffff] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf5ffffff] pci_bus 0000:05: resource 2 [mem 0xf6000000-0xf7ffffff 64bit pref] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff] pci_bus 0000:08: resource 1 [mem 0xc0600000-0xc07fffff] pci_bus 0000:08: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff] pci_bus 0000:0a: resource 10 [mem 0x000dc000-0x000dffff] pci_bus 0000:0a: resource 11 [mem 0x000e0000-0x000e3fff] pci_bus 0000:0a: resource 12 [mem 0xc0000000-0xdfffffff] pci_bus 0000:0a: resource 13 [mem 0xf0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 swapper:1 freeing invalid memtype f3404000-f3405000 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 37588k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff88000211d000 - ffff88000611d000 software IO TLB at phys 0x211d000 - 0x611d000 Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1278942552.013:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Btrfs loaded msgmni has been set to 7911 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 40 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 41 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 42 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 43 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 44 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 45 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered acpiphp: Slot [1-1] registered pci-stub: invalid id string "" ACPI: AC Adapter [ADP1] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZS0] (91 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZS1] (86 C) Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 46 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 46 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404100 irq 46 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 46 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404300 irq 46 ata6: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404380 irq 46 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf3404800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.35-rc4-nouveau+ ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3404c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.35-rc4-nouveau+ ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.35-rc4-nouveau+ uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.35-rc4-nouveau+ uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.35-rc4-nouveau+ uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.35-rc4-nouveau+ uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.35-rc4-nouveau+ uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.35-rc4-nouveau+ uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 IMA: No TPM chip found, activating TPM-bypass! Magic number: 2:74:837 rtc_cmos 00:06: setting system clock to 2010-07-12 13:49:13 UTC (1278942553) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ACPI: Battery Slot [BAT0] (battery present) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60G, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off usb 1-3: new high speed USB device using ehci_hcd and address 2 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-3: New USB device found, idVendor=0c45, idProduct=6310 usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 1-3: Product: USB 2.0 Camera usb 1-3: Manufacturer: Sonix Technology Co., Ltd. usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: New USB device found, idVendor=0bda, idProduct=0158 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: Product: USB2.0-CRW usb 1-6: Manufacturer: Generic usb 1-6: SerialNumber: 20071114173400000 Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input4 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: TSSTcorp CDDVDW SN-S083B, SB01, max UDMA/100 ata2.00: applying bridge limits ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S083B SB01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) Freeing unused kernel memory: 732k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1500k freed Freeing unused kernel memory: 1900k freed GDT-HA: Storage RAID Controller Driver. Version: 3.05 imm: Version 2.05 (for Linux 2.4.0) Fusion MPT base driver 3.04.15 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.15 Fusion MPT FC Host driver 3.04.15 Fusion MPT SAS Host driver 3.04.15 3ware Storage Controller device driver for Linux v1.26.02.003. 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Adaptec aacraid driver 1.1-5[26400]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009 QLogic Fibre Channel HBA Driver: 8.03.02-k2 Emulex LightPulse Fibre Channel SCSI driver 8.3.12 Copyright(c) 2004-2009 Emulex. All rights reserved. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded Initializing USB Mass Storage driver... scsi6 : usb-storage 1-6:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. sl811: driver sl811-hcd, 19 May 2005 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int64x1 1820 MB/s raid6: int64x2 2011 MB/s raid6: int64x4 1703 MB/s raid6: int64x8 1242 MB/s raid6: sse2x1 3683 MB/s raid6: sse2x2 3691 MB/s raid6: sse2x4 6425 MB/s raid6: using algorithm sse2x4 (6425 MB/s) async_tx: api initialized (async) xor: automatically using best checksumming function: generic_sse generic_sse: 8292.000 MB/sec xor: using function: generic_sse (8292.000 MB/sec) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 JFS: nTxBlock = 8192, nTxLock = 65536 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk FS-Cache: Netfs 'nfs' registered for caching SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem fuse init (API version 7.14) e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) device label gentoo devid 1 transid 19985 /dev/sda5 udev: starting version 159 cfg80211: Calling CRDA to update world regulatory domain ACPI: WMI: Mapper loaded input: PC Speaker as /devices/platform/pcspkr/input/input5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) acer-wmi: Acer Laptop ACPI-WMI Extras Error: Driver 'pcspkr' is already registered, aborting... r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:03:00.0: setting latency timer to 64 alloc irq_desc for 47 on node -1 alloc kstat_irqs on node -1 r8169 0000:03:00.0: irq 47 for MSI/MSI-X r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc90011896000, 00:1f:16:19:38:22, XID 1c4000c0 IRQ 47 acpi device:02: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 48 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/patch_realtek.c:1306: SKU: Nid=0x1d sku_cfg=0x40158e05 ALSA sound/pci/hda/patch_realtek.c:1308: SKU: port_connectivity=0x1 ALSA sound/pci/hda/patch_realtek.c:1309: SKU: enable_pcbeep=0x1 ALSA sound/pci/hda/patch_realtek.c:1310: SKU: check_sum=0x00000005 ALSA sound/pci/hda/patch_realtek.c:1311: SKU: customization=0x0000008e ALSA sound/pci/hda/patch_realtek.c:1312: SKU: external_amp=0x0 ALSA sound/pci/hda/patch_realtek.c:1313: SKU: platform_type=0x1 ALSA sound/pci/hda/patch_realtek.c:1314: SKU: swap=0x0 ALSA sound/pci/hda/patch_realtek.c:1315: SKU: override=0x1 hda_codec: ALC663: BIOS auto-probing. ALSA sound/pci/hda/hda_codec.c:4408: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4412: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4416: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4417: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4420: dig-out=0x1e/0x0 ALSA sound/pci/hda/hda_codec.c:4428: inputs: mic=0x18, fmic=0x12, line=0x1a, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1356: realtek: No valid SSID, checking pincfg 0x40158e05 for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1372: realtek: Enabling init ASM_ID=0x8e05 CODEC_ID=10ec0663 Linux video capture interface: v2.00 nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de0648 nvidiafb: unknown NV_ARCH uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6310) input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) [drm] Initialized drm 1.1.0 20060810 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwlagn 0000:02:00.0: setting latency timer to 64 iwlagn 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels alloc irq_desc for 49 on node -1 alloc kstat_irqs on node -1 iwlagn 0000:02:00.0: irq 49 for MSI/MSI-X iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12 phy0: Selected rate control algorithm 'iwl-agn-rs' [drm:drm_init], [drm:drm_get_dev], nouveau 0000:01:00.0: setting latency timer to 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 0 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096400a1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 62.94.7a.00 [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000 [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07 [drm] nouveau 0000:01:00.0: 7: 0x00000213: type 0x13 idx 7 tag 0xff [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD493 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD8F9 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE8FA [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA1B [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED43 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEDA8 [drm] nouveau 0000:01:00.0: 0xEDA8: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [drm] nouveau 0000:01:00.0: 0xC0EE: parsing output script 0 [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [TTM] Zone kernel: Available graphics memory: 2027506 kiB. [TTM] Initializing pool allocator. modprobe:9980 freeing invalid memtype d0000000-d0040000 [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) modprobe:9980 freeing invalid memtype d0140000-d0150000 modprobe:9980 freeing invalid memtype d0150000-d0160000 modprobe:9980 freeing invalid memtype d0170000-d0180000 modprobe:9980 freeing invalid memtype d0180000-d0190000 modprobe:9980 freeing invalid memtype d0190000-d01a0000 modprobe:9980 freeing invalid memtype d01a0000-d01b0000 modprobe:9980 freeing invalid memtype d01b0000-d01c0000 [drm:drm_sysfs_connector_add], adding "LVDS-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "HDMI Type A-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_irq_install], irq=16 [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 modprobe:9980 freeing invalid memtype d01c0000-d0240000 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40240000, bo ffff880138044c00 fbcon: nouveaufb (fb0) is primary device [drm] nouveau 0000:01:00.0: Ch-1/0x000000ac: 0x00080880 [drm] nouveau 0000:01:00.0: Ch-1/0x000000b0: 0x05000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000b4: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000b8: 0x0004089c [drm] nouveau 0000:01:00.0: Ch-1/0x000000bc: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000c0: 0x00080840 [drm] nouveau 0000:01:00.0: Ch-1/0x000000c4: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000c8: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000cc: 0x0004085c [drm] nouveau 0000:01:00.0: Ch-1/0x000000d0: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000d4: 0x00040874 [drm] nouveau 0000:01:00.0: Ch-1/0x000000d8: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000dc: 0x00080804 [drm] nouveau 0000:01:00.0: Ch-1/0x000000e0: 0x00811a8a [drm] nouveau 0000:01:00.0: Ch-1/0x000000e4: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000e8: 0x00140810 [drm] nouveau 0000:01:00.0: Ch-1/0x000000ec: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000000f0: 0x031605f6 [drm] nouveau 0000:01:00.0: Ch-1/0x000000f4: 0x0004001f [drm] nouveau 0000:01:00.0: Ch-1/0x000000f8: 0x0013006f [drm] nouveau 0000:01:00.0: Ch-1/0x000000fc: 0x031305c5 [drm] nouveau 0000:01:00.0: Ch-1/0x00000100: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000104: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000108: 0x0004082c [drm] nouveau 0000:01:00.0: Ch-1/0x0000010c: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000110: 0x000408c8 [drm] nouveau 0000:01:00.0: Ch-1/0x00000114: 0x03000556 [drm] nouveau 0000:01:00.0: Ch-1/0x00000118: 0x000408d4 [drm] nouveau 0000:01:00.0: Ch-1/0x0000011c: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000120: 0x000408a0 [drm] nouveau 0000:01:00.0: Ch-1/0x00000124: 0x00000011 [drm] nouveau 0000:01:00.0: Ch-1/0x00000128: 0x000408a4 [drm] nouveau 0000:01:00.0: Ch-1/0x0000012c: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000130: 0x000808d8 [drm] nouveau 0000:01:00.0: Ch-1/0x00000134: 0x03000556 [drm] nouveau 0000:01:00.0: Ch-1/0x00000138: 0x03000556 [drm] nouveau 0000:01:00.0: Ch-1/0x0000013c: 0x00140860 [drm] nouveau 0000:01:00.0: Ch-1/0x00000140: 0x00002400 [drm] nouveau 0000:01:00.0: Ch-1/0x00000144: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000148: 0x03000556 [drm] nouveau 0000:01:00.0: Ch-1/0x0000014c: 0x00101600 [drm] nouveau 0000:01:00.0: Ch-1/0x00000150: 0x0000cf00 [drm] nouveau 0000:01:00.0: Ch-1/0x00000154: 0x00040840 [drm] nouveau 0000:01:00.0: Ch-1/0x00000158: 0xc0000000 [drm] nouveau 0000:01:00.0: Ch-1/0x0000015c: 0x000408a8 [drm] nouveau 0000:01:00.0: Ch-1/0x00000160: 0x00040000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000164: 0x000408c0 [drm] nouveau 0000:01:00.0: Ch-1/0x00000168: 0x00000000 [drm:drm_crtc_helper_set_mode], LVDS-8: set mode 1366x768 16 [drm] nouveau 0000:01:00.0: Ch-1/0x0000016c: 0x00040600 [drm] nouveau 0000:01:00.0: Ch-1/0x00000170: 0x00003001 [drm] nouveau 0000:01:00.0: Ch-1/0x00000174: 0x00080880 [drm] nouveau 0000:01:00.0: Ch-1/0x00000178: 0x05000000 [drm] nouveau 0000:01:00.0: Ch-1/0x0000017c: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000180: 0x0004089c [drm] nouveau 0000:01:00.0: Ch-1/0x00000184: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000188: 0x00080840 [drm] nouveau 0000:01:00.0: Ch-1/0x0000018c: 0xc0000000 [drm] nouveau 0000:01:00.0: Ch-1/0x00000190: 0x00001800 [drm] nouveau 0000:01:00.0: Ch-1/0x00000194: 0x0004085c [drm] nouveau 0000:01:00.0: Ch-1/0x00000198: 0x01000000 [drm] nouveau 0000:01:00.0: Ch-1/0x0000019c: 0x00080860 [drm] nouveau 0000:01:00.0: Ch-1/0x000001a0: 0x00002400 [drm] nouveau 0000:01:00.0: Ch-1/0x000001a4: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000001a8: 0x00040874 [drm] nouveau 0000:01:00.0: Ch-1/0x000001ac: 0x01000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000001b0: 0x00040080 [drm] nouveau 0000:01:00.0: Ch-1/0x000001b4: 0x00000000 [drm] nouveau 0000:01:00.0: Ch-1/0x000001b8: PUSH! Console: switching to colour frame buffer device 170x48 fb0: nouveaufb frame buffer device drm: registered panic notifier [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [drm] nouveau 0000:01:00.0: Couldn't find matching output script table device label home devid 1 transid 38690 /dev/sda6 device label Daten devid 1 transid 13650 /dev/sda8