t hub lost power or was reset
[132640.893844] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[132640.899091] wlan0: Coming out of suspend...
[132640.904248] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[132640.904248] usb usb5: root hub lost power or was reset
[132640.909444] Intel ICH 0000:00:1e.2: setting latency timer to 64
[132640.909444] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[132640.914935] sd 0:0:0:0: [sda] Starting disk
[132640.920278] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[132640.925671] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[132640.931226] tg3 0000:02:00.0: PME# disabled
[132641.084006] lbam=00 lbah=00
[132641.091827] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[132641.097367] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[132641.097367] usb usb2: root hub lost power or was reset
[132641.103144] i915 0000:00:02.0: setting latency timer to 64
[132641.103144] i915_restore_display(): BLC_PWM_CTL=6c676c66
[132641.108966] lbam=00 lbah=00
[132641.126034] i915_restore_display(): BLC_PWM_CTL:6c676c66
[132641.136014] serial 00:0a: activated
[132641.145312] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[132641.151269] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[132641.157169] render error detected, EIR: 0x00000010
[132641.157169] page table error
[132641.157169]   PGTBL_ER: 0x00000001
[132641.157169] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[132641.157169] render error detected, EIR: 0x00000010
[132641.157169] page table error
[132641.157169]   PGTBL_ER: 0x00000001
[132641.250741] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[132641.284112] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[132641.454739] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[132641.454739] usb usb3: root hub lost power or was reset
[132641.487063] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[132642.984056] lbam=00 lbah=00
[132642.989559] lbam=00 lbah=00
[132643.000590] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[132643.000590] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[132643.006325] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[132643.012021] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[132643.017822] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[132643.040411] ata1.00: configured for UDMA/100
[132643.068432] ata1.00: configured for UDMA/100
[132643.074094] ata1: EH complete
[132643.242814] PM: resume of devices complete after 2423.990 msecs
[132643.248521] Restarting tasks ... 
[132643.248521] hub 3-0:1.0: over-current change on port 1
[132643.304012] done.
[132643.400013] video LNXVIDEO:00: Restoring backlight state
[132643.460010] [drm] Manually setting wedged to 0
[132643.508010] hub 3-0:1.0: over-current change on port 2
[140387.824007] PM: Syncing filesystems ... done.
[140388.025737] Freezing user space processes ... (elapsed 0.06 seconds) done.
[140388.097825] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[140388.117837] PM: Preallocating image memory... done (allocated 254294 pages)
[140399.794862] PM: Allocated 1017176 kbytes in 11.67 seconds (87.16 MB/s)
[140399.801202] serial 00:0a: disabled
[140399.808088] wlan0: Going into suspend...
[140399.816120] ACPI handle has no context!
[140399.816120] sdhci-pci 0000:04:00.1: PCI INT B disabled
[140399.960010] Intel ICH 0000:00:1e.2: PCI INT A disabled
[140399.968008] ipw2200 0000:04:02.0: PCI INT A disabled
[140399.977048] i915_save_display(): BLC_PWM_CTL:6c671c66
[140399.983280] ACPI handle has no context!
[140399.983280] ACPI handle has no context!
[140400.012006] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[140400.148006] tg3 0000:02:00.0: PME# enabled
[140400.148006] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[140400.164006] PM: freeze of devices complete after 363.024 msecs
[140400.164006] PM: late freeze of devices complete after 0.439 msecs
[140400.170201] ACPI: Preparing to enter system sleep state S4
[140400.480006] PM: Saving platform NVS memory
[140400.488004] Extended CMOS year: 2000
[140400.488004] PM: Creating hibernation image:
[140400.488004] PM: Need to copy 127071 pages
[140400.488004] PM: Restoring platform NVS memory
[140400.488004] Extended CMOS year: 2000
[140400.488004] Force enabled HPET at resume
[140400.488004] ACPI: Waking up from system sleep state S4
[140401.044009] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x20900106, writing 0x900106)
[140401.052009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[140401.064009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[140401.076009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[140401.088009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[140401.100009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[140401.112009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[140401.124008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[140401.136009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[140401.148009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[140401.160009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[140401.165581] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005)
[140401.165581] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcbe0000)
[140401.165581] PM: early restore of devices complete after 122.151 msecs
[140401.316010] i915 0000:00:02.0: setting latency timer to 64
[140401.316010] i915_restore_display(): BLC_PWM_CTL=6c671c66
[140401.325202] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[140401.325202] usb usb2: root hub lost power or was reset
[140401.330670] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[140401.330670] usb usb3: root hub lost power or was reset
[140401.336205] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[140401.336205] usb usb4: root hub lost power or was reset
[140401.341485] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[140401.341485] usb usb5: root hub lost power or was reset
[140401.346732] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[140401.346732] pci 0000:00:1e.0: setting latency timer to 64
[140401.346732] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[140401.352626] ata_piix 0000:00:1f.2: setting latency timer to 64
[140401.356009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[140401.362173] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[140401.368008] i915_restore_display(): BLC_PWM_CTL:6c671c66
[140401.376014] wlan0: Coming out of suspend...
[140401.381083] sd 0:0:0:0: [sda] Starting disk
[140401.386217] usb usb1: root hub lost power or was reset
[140401.392008] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[140401.392008] tg3 0000:02:00.0: PME# disabled
[140401.548006] lbam=00 lbah=00
[140401.556163] lbam=00 lbah=00
[140401.561192] Intel ICH 0000:00:1e.2: setting latency timer to 64
[140401.561192] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[140401.566604] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[140401.572007] lbam=00 lbah=00
[140401.580008] serial 00:0a: activated
[140401.592006] lbam=00 lbah=00
[140401.616009] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[140401.616009] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[140401.624007] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[140401.694745] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[140401.893118] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[140401.978747] usb 1-5: reset high speed USB device using ehci_hcd and address 2
[140402.024343] ata1.00: configured for UDMA/100
[140402.048004] ata1.00: configured for UDMA/100
[140402.048004] ata1: EH complete
[140402.585595] PM: restore of devices complete after 1273.764 msecs
[140402.590821] Restarting tasks ... done.
[140402.640008] video LNXVIDEO:00: Restoring backlight state
[140403.284002] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[140403.300018] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[143282.944010] PM: Syncing filesystems ... done.
[143283.028007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[143283.049404] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[143283.089033] serial 00:0a: disabled
[143283.094255] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[143283.100008] wlan0: Going into suspend...
[143283.105418] ACPI handle has no context!
[143283.105418] sdhci-pci 0000:04:00.1: PCI INT B disabled
[143283.248005] Intel ICH 0000:00:1e.2: PCI INT A disabled
[143283.257141] ACPI handle has no context!
[143283.257141] ipw2200 0000:04:02.0: PCI INT A disabled
[143283.265043] i915_save_display(): BLC_PWM_CTL:6c676c66
[143283.270263] ACPI handle has no context!
[143283.284006] i915 0000:00:02.0: power state changed by ACPI to D3
[143283.333300] sd 0:0:0:0: [sda] Stopping disk
[143283.440009] tg3 0000:02:00.0: PME# enabled
[143283.440009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[143283.992011] PM: suspend of devices complete after 922.460 msecs
[143284.060008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[143284.112009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[143284.284009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[143284.327573] PM: late suspend of devices complete after 291.797 msecs
[143284.408009] ACPI: Preparing to enter system sleep state S3
[143284.776008] Extended CMOS year: 2000
[143284.776008] Back to C!
[143284.776008] Extended CMOS year: 2000
[143284.776008] Force enabled HPET at resume
[143284.819162] ACPI: Waking up from system sleep state S3
[143285.336008] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
[143285.336008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[143285.336008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[143285.336008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[143285.336008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[143285.336008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[143285.380008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[143285.392008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[143285.397204] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[143285.397204] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[143285.397204] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[143285.404008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[143285.416008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[143285.428008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[143285.440008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[143285.445024] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[143285.445024] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[143285.445024] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[143285.452008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[143285.464008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[143285.468866] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[143285.468866] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[143285.468866] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[143285.468866] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[143285.468866] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[143285.468866] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[143285.468866] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[143285.468866] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[143285.468866] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[143285.476008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[143285.488008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[143285.492874] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[143285.492874] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[143285.492874] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[143285.492874] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[143285.508010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[143285.512999] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[143285.512999] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[143285.512999] PM: early resume of devices complete after 177.046 msecs
[143285.520008] i915 0000:00:02.0: setting latency timer to 64
[143285.520008] i915_restore_display(): BLC_PWM_CTL=6c676c66
[143285.525229] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[143285.525229] usb usb2: root hub lost power or was reset
[143285.536008] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[143285.536008] usb usb3: root hub lost power or was reset
[143285.541393] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[143285.541393] usb usb4: root hub lost power or was reset
[143285.546751] i915_restore_display(): BLC_PWM_CTL:6c676c66
[143285.552047] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[143285.552047] usb usb5: root hub lost power or was reset
[143285.560271] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[143285.560271] pci 0000:00:1e.0: setting latency timer to 64
[143285.560271] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[143285.566068] ata_piix 0000:00:1f.2: setting latency timer to 64
[143285.572008] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[143285.577442] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[143285.584008] wlan0: Coming out of suspend...
[143285.590139] sd 0:0:0:0: [sda] Starting disk
[143285.596006] render error detected, EIR: 0x00000010
[143285.596006] page table error
[143285.596006]   PGTBL_ER: 0x00000001
[143285.596006] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[143285.596006] render error detected, EIR: 0x00000010
[143285.596006] page table error
[143285.596006]   PGTBL_ER: 0x00000001
[143285.636050] Intel ICH 0000:00:1e.2: setting latency timer to 64
[143285.636050] tg3 0000:02:00.0: PME# disabled
[143285.792027] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[143285.797712] lbam=00 lbah=00
[143285.803378] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[143285.812009] serial 00:0a: activated
[143285.818707] lbam=00 lbah=00
[143287.632031] lbam=00 lbah=00
[143287.637505] lbam=00 lbah=00
[143287.648658] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[143287.648658] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[143287.654219] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[143287.659745] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[143287.665422] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[143287.688490] ata1.00: configured for UDMA/100
[143287.716492] ata1.00: configured for UDMA/100
[143287.721898] ata1: EH complete
[143287.886364] PM: resume of devices complete after 2368.013 msecs
[143287.892007] Restarting tasks ... 
[143287.892007] hub 1-0:1.0: over-current change on port 3
[143287.968011] done.
[143288.004010] video LNXVIDEO:00: Restoring backlight state
[143288.032010] [drm] Manually setting wedged to 0
[143288.096008] hub 1-0:1.0: over-current change on port 4
[143288.200009] hub 3-0:1.0: over-current change on port 1
[143288.304009] hub 3-0:1.0: over-current change on port 2
[152819.256509] tg3 0000:02:00.0: lan0: Link is up at 100 Mbps, full duplex
[152819.256509] tg3 0000:02:00.0: lan0: Flow control is on for TX and on for RX
[152819.256509] ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
[152830.080005] lan0: no IPv6 routers present
[152852.754713] tg3 0000:02:00.0: lan0: Link is down
[152863.380138] tg3 0000:02:00.0: PME# enabled
[152863.380138] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[152863.544011] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[152863.544011] tg3 0000:02:00.0: PME# disabled
[152863.560158] tg3 0000:02:00.0: BAR 0: set to [mem 0xa0100000-0xa010ffff 64bit] (PCI address [0xa0100000-0xa010ffff]
[152863.712006] ADDRCONF(NETDEV_UP): lan0: link is not ready
[152865.528010] PM: Syncing filesystems ... done.
[152865.632006] Freezing user space processes ... (elapsed 0.01 seconds) done.
[152865.648157] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[152865.684901] serial 00:0a: disabled
[152865.685585] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[152865.688396] wlan0: Going into suspend...
[152865.688396] ACPI handle has no context!
[152865.688396] sdhci-pci 0000:04:00.1: PCI INT B disabled
[152865.832003] ipw2200 0000:04:02.0: PCI INT A disabled
[152865.836221] ACPI handle has no context!
[152865.836221] Intel ICH 0000:00:1e.2: PCI INT A disabled
[152865.836221] ACPI handle has no context!
[152865.836221] i915_save_display(): BLC_PWM_CTL:6c676c66
[152865.856007] i915 0000:00:02.0: power state changed by ACPI to D3
[152865.942646] sd 0:0:0:0: [sda] Stopping disk
[152866.024007] tg3 0000:02:00.0: PME# enabled
[152866.024007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[152866.596402] PM: suspend of devices complete after 929.779 msecs
[152866.664008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[152866.716009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[152866.892008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[152866.937707] PM: late suspend of devices complete after 296.011 msecs
[152867.024009] ACPI: Preparing to enter system sleep state S3
[152867.396008] Extended CMOS year: 2000
[152867.396008] Back to C!
[152867.396008] Extended CMOS year: 2000
[152867.396008] Force enabled HPET at resume
[152867.442236] ACPI: Waking up from system sleep state S3
[152868.060008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[152868.060008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[152868.060008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[152868.060008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[152868.060008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[152868.104008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[152868.116008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[152868.121683] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[152868.121683] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[152868.121683] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[152868.128008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[152868.140009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[152868.152008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[152868.164008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[152868.169685] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[152868.169685] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[152868.169685] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[152868.176009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[152868.188008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[152868.193692] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[152868.193692] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[152868.193692] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[152868.193692] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[152868.193692] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[152868.193692] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[152868.193692] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[152868.193692] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[152868.193692] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[152868.200009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[152868.212008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[152868.217539] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[152868.217539] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[152868.217539] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[152868.217539] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[152868.232010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[152868.237482] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[152868.237482] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[152868.237482] PM: early resume of devices complete after 177.530 msecs
[152868.248269] i915 0000:00:02.0: setting latency timer to 64
[152868.248269] i915_restore_display(): BLC_PWM_CTL=00000000
[152868.253773] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[152868.253773] usb usb2: root hub lost power or was reset
[152868.259416] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[152868.259416] usb usb3: root hub lost power or was reset
[152868.265367] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[152868.265367] usb usb4: root hub lost power or was reset
[152868.272006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[152868.272006] usb usb5: root hub lost power or was reset
[152868.278253] i915_restore_display(): BLC_PWM_CTL:00000000
[152868.283583] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[152868.283583] pci 0000:00:1e.0: setting latency timer to 64
[152868.283583] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[152868.289050] ata_piix 0000:00:1f.2: setting latency timer to 64
[152868.292009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[152868.300008] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[152868.306788] wlan0: Coming out of suspend...
[152868.312170] sd 0:0:0:0: [sda] Starting disk
[152868.317564] Intel ICH 0000:00:1e.2: setting latency timer to 64
[152868.317564] tg3 0000:02:00.0: PME# disabled
[152868.472007] lbam=00 lbah=00
[152868.478310] render error detected, EIR: 0x00000010
[152868.478310] page table error
[152868.478310]   PGTBL_ER: 0x00000001
[152868.478310] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[152868.478310] render error detected, EIR: 0x00000010
[152868.478310] page table error
[152868.478310]   PGTBL_ER: 0x00000001
[152868.516008] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[152868.521551] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[152868.526912] lbam=00 lbah=00
[152868.564007] serial 00:0a: activated
[152870.260017] lbam=00 lbah=00
[152870.265423] lbam=00 lbah=00
[152870.276784] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[152870.276784] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[152870.282246] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[152870.287733] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[152870.293414] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[152870.316639] ata1.00: configured for UDMA/100
[152870.344650] ata1.00: configured for UDMA/100
[152870.350101] ata1: EH complete
[152870.514329] PM: resume of devices complete after 2271.045 msecs
[152870.519776] Restarting tasks ... 
[152870.520008] hub 3-0:1.0: over-current change on port 1
[152870.556009] done.
[152870.584009] video LNXVIDEO:00: Restoring backlight state
[152870.688660] hub 3-0:1.0: over-current change on port 2
[152870.812007] [drm] Manually setting wedged to 0
[153387.220072] tg3 0000:02:00.0: lan0: Link is up at 1000 Mbps, full duplex
[153387.220072] tg3 0000:02:00.0: lan0: Flow control is on for TX and on for RX
[153387.220072] ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
[153398.177568] lan0: no IPv6 routers present
[153400.567636] tg3 0000:02:00.0: lan0: Link is down
[153414.488010] PM: Syncing filesystems ... done.
[153414.568007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[153414.584018] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[153414.620776] serial 00:0a: disabled
[153414.622308] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[153414.625914] wlan0: Going into suspend...
[153414.629037] ACPI handle has no context!
[153414.629037] sdhci-pci 0000:04:00.1: PCI INT B disabled
[153414.772009] ipw2200 0000:04:02.0: PCI INT A disabled
[153414.778261] Intel ICH 0000:00:1e.2: PCI INT A disabled
[153414.781563] ACPI handle has no context!
[153414.781563] i915_save_display(): BLC_PWM_CTL:6c676c66
[153414.784919] ACPI handle has no context!
[153414.800008] i915 0000:00:02.0: power state changed by ACPI to D3
[153414.876004] sd 0:0:0:0: [sda] Stopping disk
[153414.964007] tg3 0000:02:00.0: PME# enabled
[153414.964007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[153415.540010] PM: suspend of devices complete after 936.662 msecs
[153415.608008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[153415.660009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[153415.832009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[153415.877040] PM: late suspend of devices complete after 291.528 msecs
[153415.960008] ACPI: Preparing to enter system sleep state S3
[153416.332008] Extended CMOS year: 2000
[153416.332008] Back to C!
[153416.332008] Extended CMOS year: 2000
[153416.332008] Force enabled HPET at resume
[153416.377736] ACPI: Waking up from system sleep state S3
[153416.996008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[153416.996008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[153416.996008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[153416.996008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[153416.996008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[153417.040008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[153417.052009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[153417.057691] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[153417.057691] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[153417.057691] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[153417.064009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[153417.076008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[153417.088009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[153417.100009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[153417.105687] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[153417.105687] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[153417.105687] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[153417.112009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[153417.124009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[153417.129681] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[153417.129681] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[153417.129681] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[153417.129681] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[153417.129681] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[153417.129681] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[153417.129681] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[153417.129681] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[153417.129681] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[153417.136008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[153417.148009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[153417.153358] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[153417.153358] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[153417.153358] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[153417.153358] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[153417.168010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[153417.173373] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[153417.173373] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[153417.173373] PM: early resume of devices complete after 177.426 msecs
[153417.184008] i915 0000:00:02.0: setting latency timer to 64
[153417.184008] i915_restore_display(): BLC_PWM_CTL=6c676c66
[153417.189449] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[153417.189449] usb usb2: root hub lost power or was reset
[153417.195142] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[153417.195142] usb usb3: root hub lost power or was reset
[153417.201344] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[153417.201344] usb usb4: root hub lost power or was reset
[153417.208006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[153417.208006] usb usb5: root hub lost power or was reset
[153417.217321] i915_restore_display(): BLC_PWM_CTL:6c676c66
[153417.222648] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[153417.222648] pci 0000:00:1e.0: setting latency timer to 64
[153417.222648] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[153417.228269] ata_piix 0000:00:1f.2: setting latency timer to 64
[153417.232009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[153417.237868] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[153417.244008] wlan0: Coming out of suspend...
[153417.251844] sd 0:0:0:0: [sda] Starting disk
[153417.257238] render error detected, EIR: 0x00000010
[153417.257238] page table error
[153417.257238]   PGTBL_ER: 0x00000001
[153417.257238] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[153417.257238] render error detected, EIR: 0x00000010
[153417.257238] page table error
[153417.257238]   PGTBL_ER: 0x00000001
[153417.296489] Intel ICH 0000:00:1e.2: setting latency timer to 64
[153417.296489] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[153417.301970] tg3 0000:02:00.0: PME# disabled
[153417.456006] lbam=00 lbah=00
[153417.462385] lbam=00 lbah=00
[153417.468006] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[153417.476009] serial 00:0a: activated
[153419.232156] lbam=00 lbah=00
[153419.237439] lbam=00 lbah=00
[153419.248802] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[153419.248802] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[153419.254258] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[153419.259649] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[153419.265314] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[153419.288635] ata1.00: configured for UDMA/100
[153419.316629] ata1.00: configured for UDMA/100
[153419.321992] ata1: EH complete
[153419.490910] PM: resume of devices complete after 2311.954 msecs
[153419.496372] Restarting tasks ... 
[153419.496372] hub 3-0:1.0: over-current change on port 1
[153419.524010] done.
[153419.556011] video LNXVIDEO:00: Restoring backlight state
[153419.592009] [drm] Manually setting wedged to 0
[153419.672009] hub 3-0:1.0: over-current change on port 2
[153420.128004] tg3 0000:02:00.0: PME# enabled
[153420.128004] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[153420.224006] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[153420.224006] tg3 0000:02:00.0: PME# disabled
[153420.240004] tg3 0000:02:00.0: BAR 0: set to [mem 0xa0100000-0xa010ffff 64bit] (PCI address [0xa0100000-0xa010ffff]
[153420.544005] ADDRCONF(NETDEV_UP): lan0: link is not ready
[154117.516009] PM: Syncing filesystems ... done.
[154117.584009] Freezing user space processes ... (elapsed 0.01 seconds) done.
[154117.600152] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[154117.634120] serial 00:0a: disabled
[154117.636007] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[154117.636007] wlan0: Going into suspend...
[154117.641155] sd 0:0:0:0: [sda] Stopping disk
[154117.780004] ACPI handle has no context!
[154117.780004] sdhci-pci 0000:04:00.1: PCI INT B disabled
[154117.786218] Intel ICH 0000:00:1e.2: PCI INT A disabled
[154117.788867] i915_save_display(): BLC_PWM_CTL:6c676c66
[154117.793726] ipw2200 0000:04:02.0: PCI INT A disabled
[154117.796085] ACPI handle has no context!
[154117.796085] ACPI handle has no context!
[154117.812006] i915 0000:00:02.0: power state changed by ACPI to D3
[154117.972006] tg3 0000:02:00.0: PME# enabled
[154117.972006] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[154118.168009] PM: suspend of devices complete after 549.570 msecs
[154118.232007] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[154118.284007] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[154118.456007] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[154118.499332] PM: late suspend of devices complete after 288.244 msecs
[154118.580008] ACPI: Preparing to enter system sleep state S3
[154118.968008] Extended CMOS year: 2000
[154118.968008] Back to C!
[154118.968008] Extended CMOS year: 2000
[154118.968008] Force enabled HPET at resume
[154119.012066] ACPI: Waking up from system sleep state S3
[154119.632009] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[154119.632009] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[154119.632009] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[154119.632009] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[154119.632009] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[154119.676008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[154119.688008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[154119.693435] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[154119.693435] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[154119.693435] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[154119.700008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[154119.712008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[154119.724008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[154119.736008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[154119.741423] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[154119.741423] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[154119.741423] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[154119.748009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[154119.760008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[154119.765430] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[154119.765430] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[154119.765430] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[154119.765430] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[154119.765430] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[154119.765430] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[154119.765430] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[154119.765430] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[154119.765430] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[154119.772008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[154119.784008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[154119.789268] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[154119.789268] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[154119.789268] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[154119.789268] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[154119.804010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[154119.809215] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[154119.809215] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[154119.809215] PM: early resume of devices complete after 177.265 msecs
[154119.820017] i915 0000:00:02.0: setting latency timer to 64
[154119.820017] i915_restore_display(): BLC_PWM_CTL=00000000
[154119.825440] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[154119.825440] usb usb2: root hub lost power or was reset
[154119.831157] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[154119.831157] usb usb3: root hub lost power or was reset
[154119.836485] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[154119.836485] usb usb4: root hub lost power or was reset
[154119.841825] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[154119.841825] usb usb5: root hub lost power or was reset
[154119.848491] i915_restore_display(): BLC_PWM_CTL:00000000
[154119.853616] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[154119.853616] pci 0000:00:1e.0: setting latency timer to 64
[154119.853616] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[154119.858973] ata_piix 0000:00:1f.2: setting latency timer to 64
[154119.864009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[154119.869438] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[154119.876008] wlan0: Coming out of suspend...
[154119.881519] sd 0:0:0:0: [sda] Starting disk
[154119.886686] Intel ICH 0000:00:1e.2: setting latency timer to 64
[154119.886686] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[154119.892394] render error detected, EIR: 0x00000010
[154119.892394] page table error
[154119.892394]   PGTBL_ER: 0x00000001
[154119.892394] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[154119.892394] render error detected, EIR: 0x00000010
[154119.892394] page table error
[154119.892394]   PGTBL_ER: 0x00000001
[154119.929659] tg3 0000:02:00.0: PME# disabled
[154120.084006] lbam=00 lbah=00
[154120.090889] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[154120.096677] lbam=00 lbah=00
[154120.132007] serial 00:0a: activated
[154121.860158] lbam=00 lbah=00
[154121.865398] lbam=00 lbah=00
[154121.876777] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[154121.876777] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[154121.882073] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[154121.887395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[154121.892911] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[154121.916486] ata1.00: configured for UDMA/100
[154121.944635] ata1.00: configured for UDMA/100
[154121.949923] ata1: EH complete
[154122.110283] PM: resume of devices complete after 2295.537 msecs
[154122.115567] Restarting tasks ... 
[154122.115567] hub 3-0:1.0: over-current change on port 1
[154122.160011] done.
[154122.236009] video LNXVIDEO:00: Restoring backlight state
[154122.284009] [drm] Manually setting wedged to 0
[154122.340010] hub 3-0:1.0: over-current change on port 2
[155711.616009] PM: Syncing filesystems ... done.
[155711.732007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[155711.748159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[155711.788493] serial 00:0a: disabled
[155711.792007] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[155711.792007] wlan0: Going into suspend...
[155711.798856] sd 0:0:0:0: [sda] Stopping disk
[155711.802127] ACPI handle has no context!
[155711.802127] sdhci-pci 0000:04:00.1: PCI INT B disabled
[155711.944011] Intel ICH 0000:00:1e.2: PCI INT A disabled
[155711.949416] ACPI handle has no context!
[155711.952007] ipw2200 0000:04:02.0: PCI INT A disabled
[155711.952007] ACPI handle has no context!
[155711.952007] i915_save_display(): BLC_PWM_CTL:6c676c66
[155711.972005] i915 0000:00:02.0: power state changed by ACPI to D3
[155712.136008] tg3 0000:02:00.0: PME# enabled
[155712.136008] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[155712.468010] PM: suspend of devices complete after 700.516 msecs
[155712.540008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[155712.604008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[155712.776009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[155712.819736] PM: late suspend of devices complete after 308.074 msecs
[155712.904008] ACPI: Preparing to enter system sleep state S3
[155713.276008] Extended CMOS year: 2000
[155713.276008] Back to C!
[155713.276008] Extended CMOS year: 2000
[155713.276008] Force enabled HPET at resume
[155713.320338] ACPI: Waking up from system sleep state S3
[155713.940008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[155713.940008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[155713.940008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[155713.940008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[155713.940008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[155713.984008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155713.996009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155714.001455] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[155714.001455] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[155714.001455] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155714.008009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155714.020010] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155714.032008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155714.044009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155714.049469] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[155714.049469] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[155714.049469] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155714.056009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155714.068009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155714.073467] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[155714.073467] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[155714.073467] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155714.073467] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[155714.073467] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[155714.073467] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155714.073467] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[155714.073467] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[155714.073467] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[155714.080009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[155714.092009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[155714.097304] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[155714.097304] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[155714.097304] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[155714.097304] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[155714.112011] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[155714.117250] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[155714.117250] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[155714.117250] PM: early resume of devices complete after 177.319 msecs
[155714.128018] i915 0000:00:02.0: setting latency timer to 64
[155714.128018] i915_restore_display(): BLC_PWM_CTL=00000000
[155714.133642] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[155714.133642] usb usb2: root hub lost power or was reset
[155714.139367] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[155714.139367] usb usb3: root hub lost power or was reset
[155714.144737] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[155714.144737] usb usb4: root hub lost power or was reset
[155714.150117] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[155714.150117] usb usb5: root hub lost power or was reset
[155714.156007] i915_restore_display(): BLC_PWM_CTL:00000000
[155714.162002] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[155714.162002] pci 0000:00:1e.0: setting latency timer to 64
[155714.162002] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[155714.167397] ata_piix 0000:00:1f.2: setting latency timer to 64
[155714.172009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[155714.177291] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[155714.184008] wlan0: Coming out of suspend...
[155714.190193] sd 0:0:0:0: [sda] Starting disk
[155714.195453] Intel ICH 0000:00:1e.2: setting latency timer to 64
[155714.195453] tg3 0000:02:00.0: PME# disabled
[155714.348006] lbam=00 lbah=00
[155714.356071] render error detected, EIR: 0x00000010
[155714.356071] page table error
[155714.356071]   PGTBL_ER: 0x00000001
[155714.356071] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[155714.356071] render error detected, EIR: 0x00000010
[155714.356071] page table error
[155714.356071]   PGTBL_ER: 0x00000001
[155714.392014] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[155714.397623] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[155714.404011] lbam=00 lbah=00
[155714.440008] serial 00:0a: activated
[155716.164159] lbam=00 lbah=00
[155716.169461] lbam=00 lbah=00
[155716.180824] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[155716.180824] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[155716.186182] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[155716.191564] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[155716.197138] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[155716.220653] ata1.00: configured for UDMA/100
[155716.248659] ata1.00: configured for UDMA/100
[155716.254005] ata1: EH complete
[155716.410497] PM: resume of devices complete after 2287.656 msecs
[155716.415845] Restarting tasks ... 
[155716.416066] hub 3-0:1.0: over-current change on port 1
[155716.444011] done.
[155716.540009] video LNXVIDEO:00: Restoring backlight state
[155716.576010] [drm] Manually setting wedged to 0
[155716.644009] hub 3-0:1.0: over-current change on port 2
[155778.072013] PM: Syncing filesystems ... done.
[155778.184007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[155778.205230] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[155778.244533] serial 00:0a: disabled
[155778.249265] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[155778.254813] wlan0: Going into suspend...
[155778.260342] ACPI handle has no context!
[155778.260342] sdhci-pci 0000:04:00.1: PCI INT B disabled
[155778.404006] Intel ICH 0000:00:1e.2: PCI INT A disabled
[155778.412069] ACPI handle has no context!
[155778.412069] ipw2200 0000:04:02.0: PCI INT A disabled
[155778.420087] i915_save_display(): BLC_PWM_CTL:6c676c66
[155778.425502] ACPI handle has no context!
[155778.440010] i915 0000:00:02.0: power state changed by ACPI to D3
[155778.492063] sd 0:0:0:0: [sda] Stopping disk
[155778.592009] tg3 0000:02:00.0: PME# enabled
[155778.592009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[155779.140010] PM: suspend of devices complete after 914.503 msecs
[155779.208008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[155779.260009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[155779.432010] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[155779.476770] PM: late suspend of devices complete after 292.396 msecs
[155779.560008] ACPI: Preparing to enter system sleep state S3
[155779.932008] Extended CMOS year: 2000
[155779.932008] Back to C!
[155779.932008] Extended CMOS year: 2000
[155779.932008] Force enabled HPET at resume
[155779.977246] ACPI: Waking up from system sleep state S3
[155780.596008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[155780.596008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[155780.596008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[155780.596008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[155780.596008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[155780.640008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155780.652008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155780.657559] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[155780.657559] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[155780.657559] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155780.664008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155780.676009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[155780.688008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155780.700008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155780.705557] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[155780.705557] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[155780.705557] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155780.712008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155780.724009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[155780.729563] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[155780.729563] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[155780.729563] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155780.729563] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[155780.729563] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[155780.729563] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[155780.729563] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[155780.729563] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[155780.729563] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[155780.736009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[155780.748008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[155780.753400] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[155780.753400] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[155780.753400] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[155780.753400] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[155780.768010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[155780.773341] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[155780.773341] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[155780.773341] PM: early resume of devices complete after 177.388 msecs
[155780.784017] i915 0000:00:02.0: setting latency timer to 64
[155780.784017] i915_restore_display(): BLC_PWM_CTL=6c676c66
[155780.790156] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[155780.790156] usb usb2: root hub lost power or was reset
[155780.796626] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[155780.796626] usb usb3: root hub lost power or was reset
[155780.802380] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[155780.802380] usb usb4: root hub lost power or was reset
[155780.808390] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[155780.808390] usb usb5: root hub lost power or was reset
[155780.813853] i915_restore_display(): BLC_PWM_CTL:6c676c66
[155780.819159] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[155780.819159] pci 0000:00:1e.0: setting latency timer to 64
[155780.819159] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[155780.824903] ata_piix 0000:00:1f.2: setting latency timer to 64
[155780.832009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[155780.838284] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[155780.844460] wlan0: Coming out of suspend...
[155780.849858] sd 0:0:0:0: [sda] Starting disk
[155780.856007] render error detected, EIR: 0x00000010
[155780.856007] page table error
[155780.856007]   PGTBL_ER: 0x00000001
[155780.856007] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[155780.856007] render error detected, EIR: 0x00000010
[155780.856007] page table error
[155780.856007]   PGTBL_ER: 0x00000001
[155780.893775] Intel ICH 0000:00:1e.2: setting latency timer to 64
[155780.893775] tg3 0000:02:00.0: PME# disabled
[155781.048006] lbam=00 lbah=00
[155781.054495] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[155781.060010] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[155781.065415] lbam=00 lbah=00
[155781.092007] serial 00:0a: activated
[155782.872155] lbam=00 lbah=00
[155782.877502] lbam=00 lbah=00
[155782.888778] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[155782.888778] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[155782.894188] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[155782.899616] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[155782.905106] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[155782.928606] ata1.00: configured for UDMA/100
[155782.956636] ata1.00: configured for UDMA/100
[155782.962026] ata1: EH complete
[155783.126358] PM: resume of devices complete after 2347.355 msecs
[155783.131750] Restarting tasks ... 
[155783.132007] hub 3-0:1.0: over-current change on port 1
[155783.156012] done.
[155783.188011] video LNXVIDEO:00: Restoring backlight state
[155783.216008] [drm] Manually setting wedged to 0
[155783.292009] hub 3-0:1.0: over-current change on port 2
[171891.712011] PM: Syncing filesystems ... done.
[171891.832007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[171891.848057] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[171891.886197] serial 00:0a: disabled
[171891.888289] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[171891.888289] sd 0:0:0:0: [sda] Stopping disk
[171891.893338] wlan0: Going into suspend...
[171891.896753] ipw2200 0000:04:02.0: PCI INT A disabled
[171892.040690] ACPI handle has no context!
[171892.040690] ACPI handle has no context!
[171892.040690] sdhci-pci 0000:04:00.1: PCI INT B disabled
[171892.044864] Intel ICH 0000:00:1e.2: PCI INT A disabled
[171892.049215] ACPI handle has no context!
[171892.049215] i915_save_display(): BLC_PWM_CTL:6c676c66
[171892.068009] i915 0000:00:02.0: power state changed by ACPI to D3
[171892.228008] tg3 0000:02:00.0: PME# enabled
[171892.228008] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[171892.568430] PM: suspend of devices complete after 701.943 msecs
[171892.636009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[171892.688009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[171892.860009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[171892.904012] PM: late suspend of devices complete after 291.972 msecs
[171892.988009] ACPI: Preparing to enter system sleep state S3
[171893.360009] Extended CMOS year: 2000
[171893.360009] Back to C!
[171893.360009] Extended CMOS year: 2000
[171893.360009] Force enabled HPET at resume
[171893.404518] ACPI: Waking up from system sleep state S3
[171893.920008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[171893.920008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[171893.920008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[171893.920008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[171893.920008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[171893.964008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171893.976009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171893.981472] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[171893.981472] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[171893.981472] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171893.988008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171894.000009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171894.012009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171894.024009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171894.029475] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[171894.029475] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[171894.029475] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171894.036008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171894.048008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171894.053477] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[171894.053477] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[171894.053477] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171894.053477] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[171894.053477] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[171894.053477] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171894.053477] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[171894.053477] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[171894.053477] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[171894.060008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[171894.072008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[171894.077314] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[171894.077314] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[171894.077314] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[171894.077314] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[171894.092010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[171894.097254] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[171894.097254] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[171894.097254] PM: early resume of devices complete after 177.304 msecs
[171894.108018] i915 0000:00:02.0: setting latency timer to 64
[171894.108018] i915_restore_display(): BLC_PWM_CTL=6c676c66
[171894.114265] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[171894.114265] usb usb2: root hub lost power or was reset
[171894.120056] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[171894.120056] usb usb3: root hub lost power or was reset
[171894.125462] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[171894.125462] usb usb4: root hub lost power or was reset
[171894.131004] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[171894.131004] usb usb5: root hub lost power or was reset
[171894.136604] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[171894.136604] pci 0000:00:1e.0: setting latency timer to 64
[171894.136604] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[171894.142629] ata_piix 0000:00:1f.2: setting latency timer to 64
[171894.148009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[171894.153288] i915_restore_display(): BLC_PWM_CTL:6c676c66
[171894.158484] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[171894.163734] wlan0: Coming out of suspend...
[171894.168983] sd 0:0:0:0: [sda] Starting disk
[171894.176008] Intel ICH 0000:00:1e.2: setting latency timer to 64
[171894.176008] tg3 0000:02:00.0: PME# disabled
[171894.332008] lbam=00 lbah=00
[171894.337269] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[171894.342749] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[171894.348261] lbam=00 lbah=00
[171894.353933] render error detected, EIR: 0x00000010
[171894.353933] page table error
[171894.353933]   PGTBL_ER: 0x00000001
[171894.353933] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[171894.353933] render error detected, EIR: 0x00000010
[171894.353933] page table error
[171894.353933]   PGTBL_ER: 0x00000001
[171894.416008] serial 00:0a: activated
[171896.288055] lbam=00 lbah=00
[171896.293355] lbam=00 lbah=00
[171896.304543] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[171896.304543] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[171896.309901] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[171896.315280] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[171896.320754] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[171896.344433] ata1.00: configured for UDMA/100
[171896.372443] ata1.00: configured for UDMA/100
[171896.377795] ata1: EH complete
[171896.543195] PM: resume of devices complete after 2440.359 msecs
[171896.548537] Restarting tasks ... 
[171896.548537] hub 3-0:1.0: over-current change on port 1
[171896.636011] done.
[171896.684010] video LNXVIDEO:00: Restoring backlight state
[171896.724009] [drm] Manually setting wedged to 0
[171896.784007] hub 3-0:1.0: over-current change on port 2
[171941.872009] PM: Syncing filesystems ... done.
[171942.092007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[171942.113209] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[171942.148533] serial 00:0a: disabled
[171942.153524] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[171942.159091] wlan0: Going into suspend...
[171942.164616] ACPI handle has no context!
[171942.164616] sdhci-pci 0000:04:00.1: PCI INT B disabled
[171942.308006] Intel ICH 0000:00:1e.2: PCI INT A disabled
[171942.316290] ACPI handle has no context!
[171942.316290] ipw2200 0000:04:02.0: PCI INT A disabled
[171942.324323] i915_save_display(): BLC_PWM_CTL:6c676c66
[171942.329730] ACPI handle has no context!
[171942.344009] i915 0000:00:02.0: power state changed by ACPI to D3
[171942.396005] sd 0:0:0:0: [sda] Stopping disk
[171942.500009] tg3 0000:02:00.0: PME# enabled
[171942.500009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[171943.052011] PM: suspend of devices complete after 918.654 msecs
[171943.120009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[171943.172009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[171943.344009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[171943.388897] PM: late suspend of devices complete after 292.420 msecs
[171943.472008] ACPI: Preparing to enter system sleep state S3
[171943.844009] Extended CMOS year: 2000
[171943.844009] Back to C!
[171943.844009] Extended CMOS year: 2000
[171943.844009] Force enabled HPET at resume
[171943.889450] ACPI: Waking up from system sleep state S3
[171944.440008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[171944.440008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[171944.440008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[171944.440008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[171944.440008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[171944.484008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171944.496009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171944.501578] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[171944.501578] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[171944.501578] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171944.508009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171944.520009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[171944.532008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171944.544008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171944.549569] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[171944.549569] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[171944.549569] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171944.556008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171944.568008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[171944.573573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[171944.573573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[171944.573573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171944.573573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[171944.573573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[171944.573573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[171944.573573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[171944.573573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[171944.573573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[171944.580009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[171944.592009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[171944.597417] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[171944.597417] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[171944.597417] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[171944.597417] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[171944.612010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[171944.617358] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[171944.617358] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[171944.617358] PM: early resume of devices complete after 177.408 msecs
[171944.624008] i915 0000:00:02.0: setting latency timer to 64
[171944.624008] i915_restore_display(): BLC_PWM_CTL=6c676c66
[171944.629616] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[171944.629616] usb usb2: root hub lost power or was reset
[171944.640008] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[171944.640008] usb usb3: root hub lost power or was reset
[171944.647729] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[171944.647729] usb usb4: root hub lost power or was reset
[171944.653237] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[171944.653237] usb usb5: root hub lost power or was reset
[171944.658789] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[171944.658789] i915_restore_display(): BLC_PWM_CTL:6c676c66
[171944.664189] pci 0000:00:1e.0: setting latency timer to 64
[171944.664189] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[171944.669668] ata_piix 0000:00:1f.2: setting latency timer to 64
[171944.672009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[171944.680008] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[171944.688172] wlan0: Coming out of suspend...
[171944.693574] sd 0:0:0:0: [sda] Starting disk
[171944.700008] render error detected, EIR: 0x00000010
[171944.700008] page table error
[171944.700008]   PGTBL_ER: 0x00000001
[171944.700008] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[171944.700008] render error detected, EIR: 0x00000010
[171944.700008] page table error
[171944.700008]   PGTBL_ER: 0x00000001
[171944.736239] Intel ICH 0000:00:1e.2: setting latency timer to 64
[171944.736239] tg3 0000:02:00.0: PME# disabled
[171944.888005] lbam=00 lbah=00
[171944.896479] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[171944.901836] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[171944.907350] lbam=00 lbah=00
[171944.932007] serial 00:0a: activated
[171947.068135] lbam=00 lbah=00
[171947.073461] lbam=00 lbah=00
[171947.084638] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[171947.084638] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[171947.090029] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[171947.095440] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[171947.100922] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[171947.124613] ata1.00: configured for UDMA/100
[171947.152623] ata1.00: configured for UDMA/100
[171947.158004] ata1: EH complete
[171947.318591] PM: resume of devices complete after 2695.605 msecs
[171947.324006] Restarting tasks ... 
[171947.324006] hub 3-0:1.0: over-current change on port 1
[171947.360011] done.
[171947.412009] video LNXVIDEO:00: Restoring backlight state
[171947.436008] [drm] Manually setting wedged to 0
[171947.516007] hub 3-0:1.0: over-current change on port 2
[172281.268010] PM: Syncing filesystems ... done.
[172281.340007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[172281.356154] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[172281.389235] serial 00:0a: disabled
[172281.389235] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[172281.393501] wlan0: Going into suspend...
[172281.396848] ipw2200 0000:04:02.0: PCI INT A disabled
[172281.540563] ACPI handle has no context!
[172281.540563] ACPI handle has no context!
[172281.540563] sdhci-pci 0000:04:00.1: PCI INT B disabled
[172281.540563] ACPI handle has no context!
[172281.540563] sd 0:0:0:0: [sda] Stopping disk
[172281.546339] Intel ICH 0000:00:1e.2: PCI INT A disabled
[172281.549469] i915_save_display(): BLC_PWM_CTL:6c676c66
[172281.568007] i915 0000:00:02.0: power state changed by ACPI to D3
[172281.732007] tg3 0000:02:00.0: PME# enabled
[172281.732007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[172282.072011] PM: suspend of devices complete after 697.460 msecs
[172282.140008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[172282.192009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[172282.364008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[172282.408786] PM: late suspend of devices complete after 292.398 msecs
[172282.492009] ACPI: Preparing to enter system sleep state S3
[172282.864008] Extended CMOS year: 2000
[172282.864008] Back to C!
[172282.864008] Extended CMOS year: 2000
[172282.864008] Force enabled HPET at resume
[172282.909299] ACPI: Waking up from system sleep state S3
[172283.528009] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[172283.528009] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[172283.528009] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[172283.528009] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[172283.528009] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[172283.572008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172283.584009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172283.589548] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[172283.589548] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[172283.589548] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172283.596009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172283.608009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172283.620009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172283.632009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172283.637549] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[172283.637549] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[172283.637549] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172283.644008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172283.656009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172283.661552] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[172283.661552] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[172283.661552] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172283.661552] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[172283.661552] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[172283.661552] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172283.661552] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[172283.661552] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[172283.661552] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[172283.668008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[172283.680008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[172283.685391] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[172283.685391] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[172283.685391] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[172283.685391] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[172283.700010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[172283.705340] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[172283.705340] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[172283.705340] PM: early resume of devices complete after 177.409 msecs
[172283.716018] i915 0000:00:02.0: setting latency timer to 64
[172283.716018] i915_restore_display(): BLC_PWM_CTL=6c676c66
[172283.722177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[172283.722177] usb usb2: root hub lost power or was reset
[172283.728244] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[172283.728244] usb usb3: root hub lost power or was reset
[172283.733818] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[172283.733818] usb usb4: root hub lost power or was reset
[172283.739431] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[172283.739431] usb usb5: root hub lost power or was reset
[172283.745084] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[172283.745084] pci 0000:00:1e.0: setting latency timer to 64
[172283.745084] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[172283.751436] i915_restore_display(): BLC_PWM_CTL:6c676c66
[172283.756799] ata_piix 0000:00:1f.2: setting latency timer to 64
[172283.760009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[172283.768009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[172283.774981] wlan0: Coming out of suspend...
[172283.780402] sd 0:0:0:0: [sda] Starting disk
[172283.788008] Intel ICH 0000:00:1e.2: setting latency timer to 64
[172283.788008] tg3 0000:02:00.0: PME# disabled
[172283.940006] lbam=00 lbah=00
[172283.948739] render error detected, EIR: 0x00000010
[172283.948739] page table error
[172283.948739]   PGTBL_ER: 0x00000001
[172283.948739] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[172283.948739] render error detected, EIR: 0x00000010
[172283.948739] page table error
[172283.948739]   PGTBL_ER: 0x00000001
[172283.985857] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[172283.991591] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[172283.997019] lbam=00 lbah=00
[172284.020010] serial 00:0a: activated
[172285.764157] lbam=00 lbah=00
[172285.769535] lbam=00 lbah=00
[172285.780822] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[172285.780822] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[172285.786259] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[172285.791718] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[172285.797352] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[172285.820650] ata1.00: configured for UDMA/100
[172285.848660] ata1.00: configured for UDMA/100
[172285.854086] ata1: EH complete
[172286.014691] PM: resume of devices complete after 2303.666 msecs
[172286.020124] Restarting tasks ... 
[172286.020124] hub 3-0:1.0: over-current change on port 1
[172286.092010] done.
[172286.152011] video LNXVIDEO:00: Restoring backlight state
[172286.192011] [drm] Manually setting wedged to 0
[172286.236010] hub 3-0:1.0: over-current change on port 2
[172407.740012] PM: Syncing filesystems ... done.
[172407.928006] Freezing user space processes ... (elapsed 0.01 seconds) done.
[172407.944152] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[172407.984021] serial 00:0a: disabled
[172407.985779] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[172407.988582] wlan0: Going into suspend...
[172407.992007] ipw2200 0000:04:02.0: PCI INT A disabled
[172408.136012] ACPI handle has no context!
[172408.136012] ACPI handle has no context!
[172408.136012] sdhci-pci 0000:04:00.1: PCI INT B disabled
[172408.140151] Intel ICH 0000:00:1e.2: PCI INT A disabled
[172408.144559] ACPI handle has no context!
[172408.144559] i915_save_display(): BLC_PWM_CTL:6c676c66
[172408.160005] sd 0:0:0:0: [sda] Stopping disk
[172408.205924] i915 0000:00:02.0: power state changed by ACPI to D3
[172408.328008] tg3 0000:02:00.0: PME# enabled
[172408.328008] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[172408.868011] PM: suspend of devices complete after 905.429 msecs
[172408.936009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[172408.988009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[172409.180008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[172409.224835] PM: late suspend of devices complete after 312.333 msecs
[172409.308009] ACPI: Preparing to enter system sleep state S3
[172409.680009] Extended CMOS year: 2000
[172409.680009] Back to C!
[172409.680009] Extended CMOS year: 2000
[172409.680009] Force enabled HPET at resume
[172409.725393] ACPI: Waking up from system sleep state S3
[172410.344008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[172410.344008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[172410.344008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[172410.344008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[172410.344008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[172410.388009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172410.400009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172410.405581] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[172410.405581] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[172410.405581] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172410.412009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172410.424009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[172410.436008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172410.448008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172410.453589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[172410.453589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[172410.453589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172410.460009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172410.472009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[172410.477579] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[172410.477579] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[172410.477579] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172410.477579] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[172410.477579] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[172410.477579] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[172410.477579] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[172410.477579] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[172410.477579] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[172410.484008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[172410.496008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[172410.501414] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[172410.501414] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[172410.501414] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[172410.501414] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[172410.516010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[172410.521365] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[172410.521365] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[172410.521365] PM: early resume of devices complete after 177.413 msecs
[172410.532030] i915 0000:00:02.0: setting latency timer to 64
[172410.532030] i915_restore_display(): BLC_PWM_CTL=00000000
[172410.537416] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[172410.537416] usb usb2: root hub lost power or was reset
[172410.543292] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[172410.543292] usb usb3: root hub lost power or was reset
[172410.548779] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[172410.548779] usb usb4: root hub lost power or was reset
[172410.556006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[172410.556006] usb usb5: root hub lost power or was reset
[172410.561825] i915_restore_display(): BLC_PWM_CTL:00000000
[172410.567076] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[172410.567076] pci 0000:00:1e.0: setting latency timer to 64
[172410.567076] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[172410.572493] ata_piix 0000:00:1f.2: setting latency timer to 64
[172410.576009] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[172410.581778] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[172410.588008] wlan0: Coming out of suspend...
[172410.595218] sd 0:0:0:0: [sda] Starting disk
[172410.600452] render error detected, EIR: 0x00000010
[172410.600452] page table error
[172410.600452]   PGTBL_ER: 0x00000001
[172410.600452] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[172410.600452] render error detected, EIR: 0x00000010
[172410.600452] page table error
[172410.600452]   PGTBL_ER: 0x00000001
[172410.637688] Intel ICH 0000:00:1e.2: setting latency timer to 64
[172410.637688] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[172410.644008] tg3 0000:02:00.0: PME# disabled
[172410.796006] lbam=00 lbah=00
[172410.804565] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[172410.810368] lbam=00 lbah=00
[172410.848008] serial 00:0a: activated
[172412.576157] lbam=00 lbah=00
[172412.581480] lbam=00 lbah=00
[172412.592803] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[172412.592803] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[172412.598183] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[172412.603588] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[172412.609183] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[172412.632631] ata1.00: configured for UDMA/100
[172412.649671] CCMP: decrypt failed: STA=00:18:39:ce:a3:c6
[172412.660637] ata1.00: configured for UDMA/100
[172412.666005] ata1: EH complete
[172412.822378] PM: resume of devices complete after 2295.323 msecs
[172412.827737] Restarting tasks ... 
[172412.828008] hub 3-0:1.0: over-current change on port 1
[172412.888010] done.
[172412.928011] video LNXVIDEO:00: Restoring backlight state
[172412.972009] [drm] Manually setting wedged to 0
[172413.052009] hub 3-0:1.0: over-current change on port 2
[173950.880012] PM: Syncing filesystems ... done.
[173950.988007] Freezing user space processes ... (elapsed 0.01 seconds) done.
[173951.009364] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[173951.049508] serial 00:0a: disabled
[173951.054751] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[173951.060313] wlan0: Going into suspend...
[173951.065815] ACPI handle has no context!
[173951.065815] sdhci-pci 0000:04:00.1: PCI INT B disabled
[173951.212008] Intel ICH 0000:00:1e.2: PCI INT A disabled
[173951.217733] ACPI handle has no context!
[173951.217733] ipw2200 0000:04:02.0: PCI INT A disabled
[173951.224008] i915_save_display(): BLC_PWM_CTL:6c676c66
[173951.229539] ACPI handle has no context!
[173951.244010] i915 0000:00:02.0: power state changed by ACPI to D3
[173951.304005] sd 0:0:0:0: [sda] Stopping disk
[173951.400009] tg3 0000:02:00.0: PME# enabled
[173951.400009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[173951.968011] PM: suspend of devices complete after 938.639 msecs
[173952.036008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[173952.088009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[173952.260009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[173952.304399] PM: late suspend of devices complete after 292.271 msecs
[173952.388009] ACPI: Preparing to enter system sleep state S3
[173952.760008] Extended CMOS year: 2000
[173952.760008] Back to C!
[173952.760008] Extended CMOS year: 2000
[173952.760008] Force enabled HPET at resume
[173952.804925] ACPI: Waking up from system sleep state S3
[173953.424008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[173953.424008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[173953.424008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[173953.424008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[173953.424008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[173953.468008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[173953.480009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[173953.485538] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[173953.485538] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[173953.485538] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[173953.492008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[173953.504009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[173953.516008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[173953.528008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[173953.533540] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[173953.533540] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[173953.533540] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[173953.540009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[173953.552009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[173953.557542] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[173953.557542] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[173953.557542] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[173953.557542] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[173953.557542] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[173953.557542] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[173953.557542] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[173953.557542] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[173953.557542] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[173953.564008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[173953.576008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[173953.581375] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[173953.581375] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[173953.581375] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[173953.581375] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[173953.596010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[173953.601323] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[173953.601323] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[173953.601323] PM: early resume of devices complete after 177.371 msecs
[173953.608021] i915 0000:00:02.0: setting latency timer to 64
[173953.608021] i915_restore_display(): BLC_PWM_CTL=6c676c66
[173953.613601] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[173953.613601] usb usb2: root hub lost power or was reset
[173953.624008] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[173953.624008] usb usb3: root hub lost power or was reset
[173953.632421] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[173953.632421] usb usb4: root hub lost power or was reset
[173953.637900] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[173953.637900] usb usb5: root hub lost power or was reset
[173953.643832] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[173953.643832] i915_restore_display(): BLC_PWM_CTL:6c676c66
[173953.649213] pci 0000:00:1e.0: setting latency timer to 64
[173953.649213] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[173953.655025] ata_piix 0000:00:1f.2: setting latency timer to 64
[173953.660009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[173953.665416] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[173953.673209] wlan0: Coming out of suspend...
[173953.678693] sd 0:0:0:0: [sda] Starting disk
[173953.684137] render error detected, EIR: 0x00000010
[173953.684137] page table error
[173953.684137]   PGTBL_ER: 0x00000001
[173953.684137] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[173953.684137] render error detected, EIR: 0x00000010
[173953.684137] page table error
[173953.684137]   PGTBL_ER: 0x00000001
[173953.722859] tg3 0000:02:00.0: PME# disabled
[173953.876005] lbam=00 lbah=00
[173953.883166] Intel ICH 0000:00:1e.2: setting latency timer to 64
[173953.883166] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[173953.888788] lbam=00 lbah=00
[173953.894036] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[173953.920007] serial 00:0a: activated
[173955.664155] lbam=00 lbah=00
[173955.669565] lbam=00 lbah=00
[173955.680801] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[173955.680801] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[173955.686272] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[173955.691762] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[173955.697431] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[173955.720629] ata1.00: configured for UDMA/100
[173955.748639] ata1.00: configured for UDMA/100
[173955.754096] ata1: EH complete
[173955.918467] PM: resume of devices complete after 2311.497 msecs
[173955.924007] Restarting tasks ... 
[173955.924007] hub 3-0:1.0: over-current change on port 1
[173955.968013] done.
[173956.032010] video LNXVIDEO:00: Restoring backlight state
[173956.064014] [drm] Manually setting wedged to 0
[173956.144009] hub 3-0:1.0: over-current change on port 2
[173956.688005] lib80211_crypt: registered algorithm 'TKIP'
[175878.608007] PM: Syncing filesystems ... done.
[175878.784008] Freezing user space processes ... (elapsed 0.01 seconds) done.
[175878.800019] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[175878.836020] serial 00:0a: disabled
[175878.837576] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[175878.841181] wlan0: Going into suspend...
[175878.844309] ACPI handle has no context!
[175878.844309] sdhci-pci 0000:04:00.1: PCI INT B disabled
[175878.988010] sd 0:0:0:0: [sda] Stopping disk
[175878.993463] ipw2200 0000:04:02.0: PCI INT A disabled
[175878.996665] Intel ICH 0000:00:1e.2: PCI INT A disabled
[175879.000863] ACPI handle has no context!
[175879.000863] ACPI handle has no context!
[175879.000863] i915_save_display(): BLC_PWM_CTL:6c676c66
[175879.020008] i915 0000:00:02.0: power state changed by ACPI to D3
[175879.176007] tg3 0000:02:00.0: PME# enabled
[175879.176007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[175879.528424] PM: suspend of devices complete after 709.065 msecs
[175879.596009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[175879.648009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[175879.820009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[175879.865298] PM: late suspend of devices complete after 291.953 msecs
[175879.948008] ACPI: Preparing to enter system sleep state S3
[175880.320009] Extended CMOS year: 2000
[175880.320009] Back to C!
[175880.320009] Extended CMOS year: 2000
[175880.320009] Force enabled HPET at resume
[175880.365890] ACPI: Waking up from system sleep state S3
[175880.984009] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[175880.984009] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[175880.984009] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[175880.984009] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[175880.984009] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[175881.028008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[175881.040008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[175881.045645] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[175881.045645] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[175881.045645] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[175881.052009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[175881.064008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[175881.076008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[175881.088009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[175881.093638] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[175881.093638] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[175881.093638] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[175881.100008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[175881.112008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[175881.117641] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[175881.117641] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[175881.117641] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[175881.117641] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[175881.117641] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[175881.117641] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[175881.117641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[175881.117641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[175881.117641] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[175881.124008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[175881.136008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[175881.141479] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[175881.141479] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[175881.141479] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[175881.141479] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[175881.156010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[175881.161422] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[175881.161422] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[175881.161422] PM: early resume of devices complete after 177.472 msecs
[175881.172008] i915 0000:00:02.0: setting latency timer to 64
[175881.172008] i915_restore_display(): BLC_PWM_CTL=6c676c66
[175881.180482] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[175881.180482] usb usb2: root hub lost power or was reset
[175881.186015] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[175881.186015] usb usb3: root hub lost power or was reset
[175881.191572] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[175881.191572] usb usb4: root hub lost power or was reset
[175881.197117] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[175881.197117] usb usb5: root hub lost power or was reset
[175881.203007] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[175881.203007] pci 0000:00:1e.0: setting latency timer to 64
[175881.203007] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[175881.208773] ata_piix 0000:00:1f.2: setting latency timer to 64
[175881.212009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[175881.220008] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[175881.228315] wlan0: Coming out of suspend...
[175881.233787] sd 0:0:0:0: [sda] Starting disk
[175881.239234] i915_restore_display(): BLC_PWM_CTL:6c676c66
[175881.244660] tg3 0000:02:00.0: PME# disabled
[175881.396006] lbam=00 lbah=00
[175881.405315] Intel ICH 0000:00:1e.2: setting latency timer to 64
[175881.405315] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[175881.412008] render error detected, EIR: 0x00000010
[175881.412008] page table error
[175881.412008]   PGTBL_ER: 0x00000001
[175881.412008] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[175881.412008] render error detected, EIR: 0x00000010
[175881.412008] page table error
[175881.412008]   PGTBL_ER: 0x00000001
[175881.450519] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[175881.456465] lbam=00 lbah=00
[175881.484008] serial 00:0a: activated
[175883.228159] lbam=00 lbah=00
[175883.233600] lbam=00 lbah=00
[175883.244777] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[175883.244777] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[175883.250275] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[175883.255803] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[175883.261539] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[175883.284628] ata1.00: configured for UDMA/100
[175883.312642] ata1.00: configured for UDMA/100
[175883.318141] ata1: EH complete
[175883.482237] PM: resume of devices complete after 2315.066 msecs
[175883.487730] Restarting tasks ... 
[175883.488008] hub 3-0:1.0: over-current change on port 1
[175883.536014] done.
[175883.604010] video LNXVIDEO:00: Restoring backlight state
[175883.704007] hub 3-0:1.0: over-current change on port 2
[175883.740007] [drm] Manually setting wedged to 0
[176155.808008] PM: Syncing filesystems ... done.
[176156.000397] Freezing user space processes ... (elapsed 0.01 seconds) done.
[176156.021379] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[176156.056525] serial 00:0a: disabled
[176156.061457] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[176156.067159] wlan0: Going into suspend...
[176156.072804] ACPI handle has no context!
[176156.072804] sdhci-pci 0000:04:00.1: PCI INT B disabled
[176156.216006] Intel ICH 0000:00:1e.2: PCI INT A disabled
[176156.224828] ACPI handle has no context!
[176156.224828] ipw2200 0000:04:02.0: PCI INT A disabled
[176156.232941] i915_save_display(): BLC_PWM_CTL:6c676c66
[176156.238421] ACPI handle has no context!
[176156.252005] i915 0000:00:02.0: power state changed by ACPI to D3
[176156.320004] sd 0:0:0:0: [sda] Stopping disk
[176156.408009] tg3 0000:02:00.0: PME# enabled
[176156.408009] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[176156.972010] PM: suspend of devices complete after 930.365 msecs
[176157.040008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[176157.092008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[176157.264009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[176157.309371] PM: late suspend of devices complete after 292.389 msecs
[176157.392008] ACPI: Preparing to enter system sleep state S3
[176157.764009] Extended CMOS year: 2000
[176157.764009] Back to C!
[176157.764009] Extended CMOS year: 2000
[176157.764009] Force enabled HPET at resume
[176157.809853] ACPI: Waking up from system sleep state S3
[176158.428008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[176158.428008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[176158.428008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[176158.428008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[176158.428008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[176158.472008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[176158.484008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[176158.489643] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[176158.489643] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[176158.489643] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[176158.496008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[176158.508008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[176158.520008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[176158.532009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[176158.537634] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[176158.537634] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[176158.537634] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[176158.544009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[176158.556009] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[176158.561638] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[176158.561638] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[176158.561638] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[176158.561638] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[176158.561638] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[176158.561638] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[176158.561638] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[176158.561638] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[176158.561638] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[176158.568008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[176158.580008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[176158.585479] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[176158.585479] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[176158.585479] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[176158.585479] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[176158.600011] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[176158.605423] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[176158.605423] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[176158.605423] PM: early resume of devices complete after 177.490 msecs
[176158.616009] i915 0000:00:02.0: setting latency timer to 64
[176158.616009] i915_restore_display(): BLC_PWM_CTL=6c676c66
[176158.624175] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[176158.624175] usb usb2: root hub lost power or was reset
[176158.629752] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[176158.629752] usb usb3: root hub lost power or was reset
[176158.635277] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[176158.635277] usb usb4: root hub lost power or was reset
[176158.641456] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[176158.641456] usb usb5: root hub lost power or was reset
[176158.647032] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[176158.647032] pci 0000:00:1e.0: setting latency timer to 64
[176158.647032] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[176158.652691] ata_piix 0000:00:1f.2: setting latency timer to 64
[176158.656010] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[176158.661449] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[176158.668008] i915_restore_display(): BLC_PWM_CTL:6c676c66
[176158.677137] wlan0: Coming out of suspend...
[176158.682632] sd 0:0:0:0: [sda] Starting disk
[176158.688152] Intel ICH 0000:00:1e.2: setting latency timer to 64
[176158.688152] tg3 0000:02:00.0: PME# disabled
[176158.840006] lbam=00 lbah=00
[176158.848948] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[176158.854503] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[176158.860166] render error detected, EIR: 0x00000010
[176158.860166] page table error
[176158.860166]   PGTBL_ER: 0x00000001
[176158.860166] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[176158.860166] render error detected, EIR: 0x00000010
[176158.860166] page table error
[176158.860166]   PGTBL_ER: 0x00000001
[176158.899645] lbam=00 lbah=00
[176158.928008] serial 00:0a: activated
[176160.832160] lbam=00 lbah=00
[176160.837518] lbam=00 lbah=00
[176160.848797] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[176160.848797] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[176160.854213] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[176160.859668] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[176160.865316] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[176160.888652] ata1.00: configured for UDMA/100
[176160.916658] ata1.00: configured for UDMA/100
[176160.922061] ata1: EH complete
[176161.092096] PM: resume of devices complete after 2480.908 msecs
[176161.097498] Restarting tasks ... 
[176161.097498] hub 3-0:1.0: over-current change on port 1
[176161.152011] done.
[176161.220009] video LNXVIDEO:00: Restoring backlight state
[176161.260009] [drm] Manually setting wedged to 0
[176161.328241] hub 3-0:1.0: over-current change on port 2
[176430.792009] mmc0: new high speed SD card at address 0002
[176430.796016] mmcblk0: mmc0:0002 00000 1.88 GiB 
[176430.796016]  mmcblk0: p1
[179238.016027] mmc0: card 0002 removed
[199110.972008] PM: Syncing filesystems ... done.
[199111.060008] Freezing user space processes ... (elapsed 0.01 seconds) done.
[199111.076025] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[199111.117708] serial 00:0a: disabled
[199111.121218] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[199111.124805] wlan0: Going into suspend...
[199111.128267] ACPI handle has no context!
[199111.128267] sdhci-pci 0000:04:00.1: PCI INT B disabled
[199111.272008] sd 0:0:0:0: [sda] Stopping disk
[199111.277859] ipw2200 0000:04:02.0: PCI INT A disabled
[199111.281268] Intel ICH 0000:00:1e.2: PCI INT A disabled
[199111.284925] ACPI handle has no context!
[199111.284925] ACPI handle has no context!
[199111.284925] i915_save_display(): BLC_PWM_CTL:6c676c66
[199111.304008] i915 0000:00:02.0: power state changed by ACPI to D3
[199111.460007] tg3 0000:02:00.0: PME# enabled
[199111.460007] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[199111.808009] PM: suspend of devices complete after 712.594 msecs
[199111.880008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[199111.944008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[199112.116009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[199112.161014] PM: late suspend of devices complete after 308.472 msecs
[199112.244010] ACPI: Preparing to enter system sleep state S3
[199112.616008] Extended CMOS year: 2000
[199112.616008] Back to C!
[199112.616008] Extended CMOS year: 2000
[199112.616008] Force enabled HPET at resume
[199112.661542] ACPI: Waking up from system sleep state S3
[199113.176008] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[199113.176008] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x60200000)
[199113.176008] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x60116001)
[199113.176008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
[199113.176008] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[199113.220009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[199113.232008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[199113.237571] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[199113.237571] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
[199113.237571] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[199113.244009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[199113.256009] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[199113.268010] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[199113.280008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[199113.285572] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[199113.285572] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
[199113.285572] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[199113.292008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[199113.304008] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[199113.309573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[199113.309573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
[199113.309573] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[199113.309573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[199113.309573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
[199113.309573] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800005)
[199113.309573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[199113.309573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
[199113.309573] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
[199113.316009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[199113.328009] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[199113.333417] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22806030, writing 0xa2806030)
[199113.333417] Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[199113.333417] pci 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[199113.333417] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc9e0000)
[199113.333417] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[199113.348010] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff]
[199113.353361] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[199113.353361] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[199113.353361] PM: early resume of devices complete after 177.412 msecs
[199113.364018] i915 0000:00:02.0: setting latency timer to 64
[199113.364018] i915_restore_display(): BLC_PWM_CTL=00000000
[199113.370274] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[199113.370274] usb usb2: root hub lost power or was reset
[199113.376107] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[199113.376107] usb usb3: root hub lost power or was reset
[199113.381571] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[199113.381571] usb usb4: root hub lost power or was reset
[199113.388007] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[199113.388007] usb usb5: root hub lost power or was reset
[199113.393825] i915_restore_display(): BLC_PWM_CTL:00000000
[199113.399061] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[199113.399061] pci 0000:00:1e.0: setting latency timer to 64
[199113.399061] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[199113.404449] ata_piix 0000:00:1f.2: setting latency timer to 64
[199113.408009] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[199113.413342] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[199113.418692] wlan0: Coming out of suspend...
[199113.424049] sd 0:0:0:0: [sda] Starting disk
[199113.432913] Intel ICH 0000:00:1e.2: setting latency timer to 64
[199113.432913] tg3 0000:02:00.0: PME# disabled
[199113.588007] lbam=00 lbah=00
[199113.593244] render error detected, EIR: 0x00000010
[199113.593244] page table error
[199113.593244]   PGTBL_ER: 0x00000001
[199113.593244] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[199113.593244] render error detected, EIR: 0x00000010
[199113.593244] page table error
[199113.593244]   PGTBL_ER: 0x00000001
[199113.629400] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[199113.634739] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[199113.640084] lbam=00 lbah=00
[199113.680013] serial 00:0a: activated
[199115.488057] lbam=00 lbah=00
[199115.493437] lbam=00 lbah=00
[199115.504610] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[199115.504610] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[199115.510046] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[199115.515506] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[199115.521040] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[199115.544400] ata1.00: configured for UDMA/100
[199115.572448] ata1.00: configured for UDMA/100
[199115.577872] ata1: EH complete
[199115.734208] PM: resume of devices complete after 2375.158 msecs
[199115.739634] Restarting tasks ... 
[199115.739634] hub 3-0:1.0: over-current change on port 1
[199115.772014] done.
[199115.816009] video LNXVIDEO:00: Restoring backlight state
[199115.844016] [drm] Manually setting wedged to 0
[199115.920010] hub 3-0:1.0: over-current change on port 2