Linux version 2.6.34-gentoo-r1 (root@home) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #7 Sun Aug 8 09:54:58 EEST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000057ea0000 (usable) BIOS-e820: 0000000057ea0000 - 0000000057eb0000 (ACPI data) BIOS-e820: 0000000057eb0000 - 0000000057f00000 (ACPI NVS) BIOS-e820: 0000000057f00000 - 0000000058000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! MPS support code is not built-in. Using acpi=off or acpi=noirq or pci=noacpi may have problem DMI present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x57ea0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 040000000 mask FF0000000 write-back 2 base 050000000 mask FF8000000 write-back 3 base 057F00000 mask FFFF00000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 37e47000 - 37ff0000 Allocated new RAMDISK: 00100000 - 002a89be Move RAMDISK from 0000000037e47000 - 0000000037fef9bd to 00100000 - 002a89bd ACPI: RSDP 000f75e0 00014 (v00 TOSINV) ACPI: RSDT 57eaaae6 00038 (v01 TOSINV RSDT 06040000 LTP 00000000) ACPI: FACP 57eafef6 00074 (v01 TOSINV Goldfish 06040000 ATI 000F4240) ACPI: DSDT 57eaaf3a 04FBC (v01 TOSINV SB450 06040000 MSFT 0100000E) ACPI: FACS 57eb0fc0 00040 ACPI: APIC 57eaff6a 0005A (v01 TOSINV ? APIC 06040000 LTP 00000000) ACPI: MCFG 57eaffc4 0003C (v01 TOSINV MCFG 06040000 LTP 00000000) ACPI: SSDT 57eaad19 00221 (v01 TOSINV Cpu0Cst 00003001 INTL 20030224) ACPI: SSDT 57eaab1e 001FB (v01 TOSINV CpuPm 00003000 INTL 20030224) 518MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x00057ea0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x00057ea0 On node 0 totalpages: 359998 free_area_init_node: node 0, pgdat c159b708, node_mem_map c1642020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 1038 pages used for memmap HighMem zone: 131732 pages, LIFO batch:31 Using APIC driver default SB4X0 revision 0x82 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x8008 APIC: disable apic facility APIC: switched to apic NOOP nr_irqs_gsi: 16 Allocating PCI resources starting at 58000000 (gap: 58000000:88000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357184 Kernel command line: root=/dev/ram0 ramdisk=8192 dolvm init=/boot/linuxrc real_root=/dev/mapper/zweig-mansikka crypt_root=/dev/sda2 splash=verbose,theme:MyTheme console=tty1 quiet doscsi vga=791 acpi=noirq noapic resume=/dev/mapper/zweig-puolukka pci=biosirq PID hash table entries: 4096 (order: 2, 16384 bytes) early_res array is doubled to 64 at [1000 - 17ff] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Subtract (31 early reservations) #1 [0001000000 - 0001639990] TEXT DATA BSS #2 [000009f800 - 0000100000] BIOS reserved #3 [000163a000 - 0001640110] BRK #4 [0000007000 - 0000008000] PGTABLE #5 [0000100000 - 00002a9000] NEW RAMDISK #6 [0001641000 - 0001642000] BOOTMEM #7 [0001642000 - 0002142000] BOOTMEM #8 [0001639a00 - 0001639a04] BOOTMEM #9 [0001639a80 - 0001639b00] BOOTMEM #10 [0001639b00 - 0001639b54] BOOTMEM #11 [0002142000 - 0002144000] BOOTMEM #12 [0001639b80 - 0001639bb4] BOOTMEM #13 [0002144000 - 0002146000] BOOTMEM #14 [0001639c00 - 0001639d50] BOOTMEM #15 [0001639d80 - 0001639dc0] BOOTMEM #16 [0001639e00 - 0001639e40] BOOTMEM #17 [0001639e80 - 0001639ec0] BOOTMEM #18 [0001639f00 - 0001639f40] BOOTMEM #19 [0001639f80 - 0001639fc0] BOOTMEM #20 [0001640180 - 00016401c0] BOOTMEM #21 [0001640200 - 0001640240] BOOTMEM #22 [0001640280 - 00016402c0] BOOTMEM #23 [0001640300 - 0001640340] BOOTMEM #24 [0001640380 - 00016403c0] BOOTMEM #25 [0001640400 - 0001640440] BOOTMEM #26 [0001640480 - 000164056e] BOOTMEM #27 [0001640580 - 000164066e] BOOTMEM #28 [0002146000 - 000214a000] BOOTMEM #29 [000214a000 - 00021ca000] BOOTMEM #30 [00021ca000 - 000220a000] BOOTMEM Initializing HighMem for node 0 (000377fe:00057ea0) Memory: 1419816k/1440384k available (3772k kernel code, 20176k reserved, 1985k data, 320k init, 531080k highmem) virtual kernel memory layout: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc15a0000 - 0xc15f0000 ( 320 kB) .data : 0xc13af155 - 0xc159f7b4 (1985 kB) .text : 0xc1000000 - 0xc13af155 (3772 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:288 Console: colour VGA+ 80x25 console [tty1] enabled Fast TSC calibration using PIT Detected 1393.350 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2786.70 BogoMIPS (lpj=1393350) Mount-cache hash table entries: 512 mce: CPU supports 5 MCE banks Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 CPU: Intel(R) Celeron(R) M processor 1.40GHz stepping 08 Checking 'hlt' instruction... OK. ACPI: Core revision 20100121 ACPI: setting ELCR to 0a00 (from 0800) Apic disabled NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xe0000000-0xe03fffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe03fffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [PFA1] (off) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A03:00: host bridge window [mem 0x58000000-0xfebfffff] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci 0000:00:12.0: reg 10: [io 0x8440-0x8447] pci 0000:00:12.0: reg 14: [io 0x8430-0x8433] pci 0000:00:12.0: reg 18: [io 0x8420-0x8427] pci 0000:00:12.0: reg 1c: [io 0x8410-0x8413] pci 0000:00:12.0: reg 20: [io 0x8400-0x840f] pci 0000:00:12.0: reg 24: [mem 0xc0004000-0xc00041ff] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:00:12.0: supports D1 D2 pci 0000:00:13.0: reg 10: [mem 0xc0005000-0xc0005fff] pci 0000:00:13.1: reg 10: [mem 0xc0006000-0xc0006fff] pci 0000:00:13.2: reg 10: [mem 0xc0007000-0xc0007fff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.0: reg 10: [io 0x8450-0x845f] pci 0000:00:14.0: reg 14: [mem 0xc0004400-0xc00047ff] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377] pci 0000:00:14.1: reg 20: [io 0x8460-0x846f] pci 0000:00:14.2: reg 10: [mem 0xc0000000-0xc0003fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff] pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] pci 0000:02:04.0: reg 10: [mem 0xc0200000-0xc020ffff] pci 0000:02:06.0: reg 10: [mem 0xfebfe000-0xfebfefff] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:02:07.0: reg 10: [io 0xa000-0xa0ff] pci 0000:02:07.0: reg 14: [mem 0xc0215000-0xc02150ff] pci 0000:02:07.0: supports D1 D2 pci 0000:02:07.0: PME# supported from D1 D2 D3hot pci 0000:02:07.0: PME# disabled pci 0000:02:0a.0: reg 10: [mem 0xc0215800-0xc0215fff] pci 0000:02:0a.0: reg 14: [mem 0xc0210000-0xc0213fff] pci 0000:02:0a.0: supports D1 D2 pci 0000:02:0a.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:0a.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xa000-0xafff] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x58000000-0xfebfffff] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.22.1. PCI: Probing PCI hardware PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 0000000057ea0000 - 0000000057ffffff cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource tsc Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref] pnp 00:09: disabling [mem 0x00000000-0x00000fff disabled] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:08: [io 0x1080] has been reserved system 00:08: [io 0x0220-0x022f] has been reserved system 00:08: [io 0x0400-0x0401] has been reserved system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0530-0x0537] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd4-0x0cd5] has been reserved system 00:08: [io 0x0cd6-0x0cd7] has been reserved system 00:08: [io 0x0cd8-0x0cdf] has been reserved system 00:08: [io 0x8000-0x805f] has been reserved system 00:08: [io 0x8100-0x81ff window] has been reserved system 00:08: [io 0x0f40-0x0f47] has been reserved system 00:08: [io 0x0280-0x0293] has been reserved system 00:08: [io 0x087f] has been reserved system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved system 00:09: [mem 0xfff80000-0xffffffff] has been reserved system 00:09: [mem 0xc0004800-0xc0004fff] has been reserved pci 0000:00:14.4: BAR 9: assigned [mem 0x58000000-0x5bffffff pref] pci 0000:00:12.0: BAR 6: assigned [mem 0x5c000000-0x5c07ffff pref] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] pci 0000:02:06.0: BAR 9: assigned [mem 0x58000000-0x5bffffff pref] pci 0000:02:06.0: BAR 10: assigned [mem 0x60000000-0x63ffffff] pci 0000:02:06.0: BAR 7: assigned [io 0xa400-0xa4ff] pci 0000:02:06.0: BAR 8: assigned [io 0xa800-0xa8ff] pci 0000:02:06.0: CardBus bridge to [bus 03-03] pci 0000:02:06.0: bridge window [io 0xa400-0xa4ff] pci 0000:02:06.0: bridge window [io 0xa800-0xa8ff] pci 0000:02:06.0: bridge window [mem 0x58000000-0x5bffffff pref] pci 0000:02:06.0: bridge window [mem 0x60000000-0x63ffffff] pci 0000:00:14.4: PCI bridge to [bus 02-04] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff] pci 0000:00:14.4: bridge window [mem 0x58000000-0x5bffffff pref] pci 0000:02:06.0: enabling device (0004 -> 0007) pci 0000:02:06.0: can't find IRQ for PCI INT A pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 8 [mem 0x58000000-0xfebfffff] pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 10 [io 0x0d00-0xffff] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc02fffff] pci_bus 0000:02: resource 2 [mem 0x58000000-0x5bffffff pref] pci_bus 0000:02: resource 4 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 5 [mem 0x000d0000-0x000d3fff] pci_bus 0000:02: resource 6 [mem 0x000d4000-0x000d7fff] pci_bus 0000:02: resource 7 [mem 0x000d8000-0x000dbfff] pci_bus 0000:02: resource 8 [mem 0x58000000-0xfebfffff] pci_bus 0000:02: resource 9 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 10 [io 0x0d00-0xffff] pci_bus 0000:03: resource 0 [io 0xa400-0xa4ff] pci_bus 0000:03: resource 1 [io 0xa800-0xa8ff] pci_bus 0000:03: resource 2 [mem 0x58000000-0x5bffffff pref] pci_bus 0000:03: resource 3 [mem 0x60000000-0x63ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 1700k freed microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20 microcode: Microcode Update Driver: v2.00 , Peter Oruba highmem bounce pool size: 64 pages msgmni has been set to 1739 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Linux agpgart interface v0.103 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). ACPI: AC Adapter [ADP0] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] acpi device:15: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:13/LNXVIDEO:00/input/input3 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Marking TSC unstable due to TSC halts in idle Switching to clocksource acpi_pm Switched to NOHz mode on CPU #0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZCR] (82 C) [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: power state changed by ACPI to D0 radeon 0000:01:05.0: power state changed by ACPI to D0 [drm] initializing kernel modesetting (RS400 0x1002:0x5A62). [drm] register mmio base: 0xC0100000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] 1 Power State(s) [drm] State 0 Default (default) [drm] 1 Clock Mode(s) [drm] 0 engine: 300000 [drm] radeon: power management initialized [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?) [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:05.0: VRAM: 128M 0x58000000 - 0x5FFFFFFF (128M used) radeon 0000:01:05.0: GTT: 32M 0x60000000 - 0x61FFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 445218 kiB. [TTM] Zone highmem: Available graphics memory: 710758 kiB. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 32M of GTT memory ready. [drm] GART: num cpu pages 8192, num gpu pages 8192 [drm] radeon: 4 quad pipes, 1 z pipes initialized. [drm] radeon: cp idle (0x10000C03) [drm] Loading R300 Microcode platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin [drm] radeon: ring at 0x0000000060000000 [drm] ring test succeeded in 2 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Default TV standard: NTSC [drm] 14.318180000 MHz TV ref clk [drm] Panel ID String: LPL [drm] Panel Size 1280x800 [drm] Default TV standard: NTSC [drm] 14.318180000 MHz TV ref clk [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [drm] Encoders: [drm] CRT1: INTERNAL_DAC2 [drm] Connector 1: [drm] LVDS [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [drm] Encoders: [drm] LCD1: INTERNAL_LVDS [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] fb mappable at 0xD0040000 [drm] vram apper at 0xD0000000 [drm] size 4096000 [drm] fb depth is 24 [drm] pitch is 5120 Console: switching to colour frame buffer device 160x50 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.3.0 20080528 for 0000:01:05.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded usbcore: registered new interface driver ub aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded sata_sil 0000:00:12.0: version 2.4 sata_sil 0000:00:12.0: enabling device (0005 -> 0007) scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 11 ata2: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 11 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi2 : pata_atiixp scsi3 : pata_atiixp ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14 ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:02:07.0: eth0: RealTek RTL8139 at 0xf803c000, 00:a0:d1:30:c2:c8, IRQ 11 ath5k 0000:02:04.0: registered as 'phy0' ath: EEPROM regdomain: 0x64 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x64 phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 11, io mem 0xc0007000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd usb usb1: SerialNumber: 0000:00:13.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0005000 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ACPI: Battery Slot [BAT0] (battery present) usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0006000 ata4.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.50, max UDMA/33 ata4.00: configured for UDMA/33 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice ACPI Error: Could not disable RealTimeClock events (20100121/evxfevnt-419) rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8450, revision 0 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver hda_codec: ALC861: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4 usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA ATI SB at 0xc0000000 irq 11 IPv4 over IPv4 tunneling driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode rtc_cmos 00:04: setting system clock to 2010-08-08 07:01:04 UTC (1281250864) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: New USB device found, idVendor=0d49, idProduct=7450 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: Basics Portable usb 1-1: Manufacturer: Maxtor usb 1-1: SerialNumber: 2HB1067D scsi4 : usb-storage 1-1:1.0 ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101A, max UDMA/100 ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0/0x0 synaptics: Toshiba Satellite Pro A100 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 ata2: SATA link down (SStatus 0 SControl 300) scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.50 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 Freeing unused kernel memory: 320k freed scsi 4:0:0:0: Direct-Access Maxtor Basics Portable 0122 PQ: 0 ANSI: 4 sd 4:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 2d 08 00 00 sd 4:0:0:0: [sdb] Assuming drive cache: write through sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sd 4:0:0:0: Attached scsi generic sg2 type 0 sdb1 sd 4:0:0:0: [sdb] Assuming drive cache: write through sd 4:0:0:0: [sdb] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs (dm-5): mounted filesystem with writeback data mode udev: starting version 151 EXT3-fs (dm-5): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (dm-3): using internal journal EXT3-fs (dm-3): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-4): using internal journal EXT3-fs (dm-4): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-6): using internal journal EXT3-fs (dm-6): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-7): using internal journal EXT3-fs (dm-7): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-8): using internal journal EXT3-fs (dm-8): mounted filesystem with writeback data mode Adding 3145724k swap on /dev/mapper/zweig-porkkana. Priority:-1 extents:1 across:3145724k Adding 3145724k swap on /dev/mapper/zweig-puolukka. Priority:-2 extents:1 across:3145724k