[ 0.000000] Linux version 2.6.35-gentoo-r1 (root@keskus) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 PREEMPT Sat Aug 14 14:54:35 EEST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffc0000 (usable) [ 0.000000] BIOS-e820: 000000006ffc0000 - 000000006ffd0000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ffd0000 - 0000000070000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x6ffc0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006ffc0000 (usable) [ 0.000000] modified: 000000006ffc0000 - 000000006ffd0000 (ACPI data) [ 0.000000] modified: 000000006ffd0000 - 0000000070000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 14000-19000 [ 0.000000] ACPI: RSDP 000f9ed0 00021 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 6ffc0100 0003C (v01 A M I OEMXSDT 02000616 MSFT 00000097) [ 0.000000] ACPI: FACP 6ffc0290 000F4 (v03 A M I OEMFACP 02000616 MSFT 00000097) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100428/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x00000000000044A0/0x0 (20100428/tbfadt-557) [ 0.000000] ACPI: DSDT 6ffc0400 0441D (v01 A0128 A0128003 00000003 INTL 02002026) [ 0.000000] ACPI: FACS 6ffd0000 00040 [ 0.000000] ACPI: APIC 6ffc0390 00068 (v01 A M I OEMAPIC 02000616 MSFT 00000097) [ 0.000000] ACPI: OEMB 6ffd0040 00041 (v01 A M I OEMBIOS 02000616 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 903MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] early_res array is doubled to 64 at [15000 - 157ff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0006ffc0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006ffc0 [ 0.000000] On node 0 totalpages: 458575 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1808 pages used for memmap [ 0.000000] HighMem zone: 229554 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454991 [ 0.000000] Kernel command line: root=/dev/sda3 radeon.agpmode=-1 drm.debug=15 usbcore.autosuspend=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (55 early reservations) [ 0.000000] #1 [0001000000 - 00016f0820] TEXT DATA BSS [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #3 [00016f1000 - 00016f8170] BRK [ 0.000000] #4 [0000010000 - 0000014000] ACPI WAKEUP [ 0.000000] #5 [0000014000 - 0000015000] PGTABLE [ 0.000000] #6 [00016f9000 - 00016fa000] BOOTMEM [ 0.000000] #7 [00016f0940 - 00016f0a20] BOOTMEM [ 0.000000] #8 [00016fa000 - 000177a000] BOOTMEM [ 0.000000] #9 [000177a000 - 00017fa000] BOOTMEM [ 0.000000] #10 [00017fa000 - 000187a000] BOOTMEM [ 0.000000] #11 [000187a000 - 00018fa000] BOOTMEM [ 0.000000] #12 [00018fa000 - 000197a000] BOOTMEM [ 0.000000] #13 [000197a000 - 00019fa000] BOOTMEM [ 0.000000] #14 [00019fa000 - 0001a7a000] BOOTMEM [ 0.000000] #15 [0001a7a000 - 0001afa000] BOOTMEM [ 0.000000] #16 [0001afa000 - 0001b7a000] BOOTMEM [ 0.000000] #17 [0001b7a000 - 0001bfa000] BOOTMEM [ 0.000000] #18 [0001bfa000 - 0001c7a000] BOOTMEM [ 0.000000] #19 [0001c7a000 - 0001cfa000] BOOTMEM [ 0.000000] #20 [0001cfa000 - 0001d7a000] BOOTMEM [ 0.000000] #21 [0001d7a000 - 0001dfa000] BOOTMEM [ 0.000000] #22 [0001dfa000 - 0001e7a000] BOOTMEM [ 0.000000] #23 [0001e7a000 - 0001efa000] BOOTMEM [ 0.000000] #24 [0001efa000 - 0001f7a000] BOOTMEM [ 0.000000] #25 [0001f7a000 - 0001ffa000] BOOTMEM [ 0.000000] #26 [0001ffa000 - 000207a000] BOOTMEM [ 0.000000] #27 [000207a000 - 00020fa000] BOOTMEM [ 0.000000] #28 [00020fa000 - 000217a000] BOOTMEM [ 0.000000] #29 [000217a000 - 00021fa000] BOOTMEM [ 0.000000] #30 [00021fa000 - 000227a000] BOOTMEM [ 0.000000] #31 [000227a000 - 00022fa000] BOOTMEM [ 0.000000] #32 [00022fa000 - 000237a000] BOOTMEM [ 0.000000] #33 [000237a000 - 00023fa000] BOOTMEM [ 0.000000] #34 [00023fa000 - 000247a000] BOOTMEM [ 0.000000] #35 [000247a000 - 00024fa000] BOOTMEM [ 0.000000] #36 [00016f0840 - 00016f08c0] BOOTMEM [ 0.000000] #37 [00024fa000 - 00024fc000] BOOTMEM [ 0.000000] #38 [00024fc000 - 00024fe000] BOOTMEM [ 0.000000] #39 [00016f08c0 - 00016f08e7] BOOTMEM [ 0.000000] #40 [00016f0a40 - 00016f0b58] BOOTMEM [ 0.000000] #41 [00016f0900 - 00016f0940] BOOTMEM [ 0.000000] #42 [00016f0b80 - 00016f0bc0] BOOTMEM [ 0.000000] #43 [00016f0bc0 - 00016f0c00] BOOTMEM [ 0.000000] #44 [00016f0c00 - 00016f0c40] BOOTMEM [ 0.000000] #45 [00016f0c40 - 00016f0c80] BOOTMEM [ 0.000000] #46 [00016f0c80 - 00016f0cc0] BOOTMEM [ 0.000000] #47 [00016f0cc0 - 00016f0d00] BOOTMEM [ 0.000000] #48 [00016f0d00 - 00016f0d40] BOOTMEM [ 0.000000] #49 [00016f0d40 - 00016f0d80] BOOTMEM [ 0.000000] #50 [00016f0d80 - 00016f0dc4] BOOTMEM [ 0.000000] #51 [00016f0e00 - 00016f0e44] BOOTMEM [ 0.000000] #52 [00024fe000 - 0002502000] BOOTMEM [ 0.000000] #53 [0002502000 - 0002582000] BOOTMEM [ 0.000000] #54 [0002582000 - 00025c2000] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0006ffc0) [ 0.000000] Memory: 1812000k/1834752k available (4168k kernel code, 22300k reserved, 1890k data, 368k init, 925448k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc15eb000 - 0xc1647000 ( 368 kB) [ 0.000000] .data : 0xc1412161 - 0xc15eab44 (1890 kB) [ 0.000000] .text : 0xc1000000 - 0xc1412161 (4168 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:288 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2099.788 MHz processor. [ 0.001007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.57 BogoMIPS (lpj=2099788) [ 0.001182] pid_max: default: 32768 minimum: 301 [ 0.001295] Mount-cache hash table entries: 512 [ 0.002009] Initializing cgroup subsys ns [ 0.002098] Initializing cgroup subsys cpuacct [ 0.002184] Initializing cgroup subsys devices [ 0.002272] Initializing cgroup subsys freezer [ 0.002375] mce: CPU supports 5 MCE banks [ 0.002488] Performance Events: AMD PMU driver. [ 0.002606] ... version: 0 [ 0.002691] ... bit width: 48 [ 0.002777] ... generic registers: 4 [ 0.002863] ... value mask: 0000ffffffffffff [ 0.002950] ... max period: 00007fffffffffff [ 0.003001] ... fixed-purpose events: 0 [ 0.003087] ... event mask: 000000000000000f [ 0.003175] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 0.003949] ACPI: Core revision 20100428 [ 0.010182] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.010625] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.020999] khelper used greatest stack depth: 7504 bytes left [ 0.020999] NET: Registered protocol family 16 [ 0.021120] i2c-core: driver [dummy] registered [ 0.021128] node 0 link 0: io port [1000, ffffff] [ 0.021132] TOM: 0000000070000000 aka 1792M [ 0.021221] node 0 link 0: mmio [a0000, bffff] [ 0.021225] node 0 link 0: mmio [70000000, fe0bffff] [ 0.021228] bus: [00, ff] on node 0 link 0 [ 0.021232] bus: 00 index 0 [io 0x0000-0xffff] [ 0.021235] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.021238] bus: 00 index 2 [mem 0x70000000-0xffffffff] [ 0.021246] ACPI: bus type pci registered [ 0.022449] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.022538] PCI: Using configuration type 1 for base access [ 0.022928] khelper used greatest stack depth: 7488 bytes left [ 0.023585] khelper used greatest stack depth: 7204 bytes left [ 0.027788] bio: create slab at 0 [ 0.028899] ACPI: EC: Look up EC in DSDT [ 0.030037] ACPI: Executed 1 blocks of module-level executable AML code [ 0.030472] ACPI: Actual Package length (234) is larger than NumElements field (3), truncated [ 0.030644] [ 0.033432] ACPI: Interpreter enabled [ 0.033520] ACPI: (supports S0 S1 S3 S5) [ 0.033722] ACPI: Using IOAPIC for interrupt routing [ 0.043190] ACPI: Power Resource [ISAV] (on) [ 0.043397] ACPI Warning: Incorrect checksum in table [OEMB] - 0x62, should be 0x59 (20100428/tbutils-314) [ 0.043709] ACPI: No dock devices found. [ 0.043799] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.044086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.044417] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.044422] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.044425] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.044429] pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xff7bffff] (ignored) [ 0.044453] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xdfffffff pref] [ 0.044520] pci 0000:00:01.1: reg 10: [io 0x5080-0x509f] [ 0.044528] pci 0000:00:01.1: reg 20: [io 0x5000-0x503f] [ 0.044533] pci 0000:00:01.1: reg 24: [io 0x5040-0x507f] [ 0.044543] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.044547] pci 0000:00:01.1: PME# disabled [ 0.044565] pci 0000:00:02.0: reg 10: [mem 0xff6fd000-0xff6fdfff] [ 0.044581] pci 0000:00:02.0: supports D1 D2 [ 0.044583] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.044587] pci 0000:00:02.0: PME# disabled [ 0.044600] pci 0000:00:02.1: reg 10: [mem 0xff6fe000-0xff6fefff] [ 0.044616] pci 0000:00:02.1: supports D1 D2 [ 0.044619] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.044622] pci 0000:00:02.1: PME# disabled [ 0.044637] pci 0000:00:02.2: reg 10: [mem 0xff6ffc00-0xff6ffcff] [ 0.044656] pci 0000:00:02.2: supports D1 D2 [ 0.044659] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.044663] pci 0000:00:02.2: PME# disabled [ 0.044681] pci 0000:00:05.0: reg 10: [mem 0xff6fc000-0xff6fcfff] [ 0.044686] pci 0000:00:05.0: reg 14: [io 0xec00-0xec07] [ 0.044700] pci 0000:00:05.0: supports D1 D2 [ 0.044703] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.044707] pci 0000:00:05.0: PME# disabled [ 0.044719] pci 0000:00:06.0: reg 10: [io 0xe800-0xe8ff] [ 0.044723] pci 0000:00:06.0: reg 14: [io 0xe400-0xe47f] [ 0.044728] pci 0000:00:06.0: reg 18: [mem 0xff6fb000-0xff6fbfff] [ 0.044741] pci 0000:00:06.0: supports D1 D2 [ 0.044759] pci 0000:00:08.0: reg 20: [io 0xffa0-0xffaf] [ 0.044781] pci 0000:00:0a.0: reg 10: [io 0x09f0-0x09f7] [ 0.044785] pci 0000:00:0a.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.044789] pci 0000:00:0a.0: reg 18: [io 0x0970-0x0977] [ 0.044794] pci 0000:00:0a.0: reg 1c: [io 0x0b70-0x0b73] [ 0.044798] pci 0000:00:0a.0: reg 20: [io 0xc800-0xc80f] [ 0.044802] pci 0000:00:0a.0: reg 24: [io 0xc400-0xc47f] [ 0.044894] PCI: peer root bus 00 res updated from pci conf [ 0.044932] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff pref] [ 0.044939] pci 0000:01:00.0: reg 14: [io 0xa800-0xa8ff] [ 0.044947] pci 0000:01:00.0: reg 18: [mem 0xff4f0000-0xff4fffff] [ 0.044966] pci 0000:01:00.0: reg 30: [mem 0xff4c0000-0xff4dffff pref] [ 0.044989] pci 0000:01:00.0: supports D1 D2 [ 0.045038] pci 0000:00:0b.0: PCI bridge to [bus 01-01] [ 0.045127] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 0.045131] pci 0000:00:0b.0: bridge window [mem 0xff400000-0xff4fffff] [ 0.045135] pci 0000:00:0b.0: bridge window [mem 0x9eb00000-0xbeafffff pref] [ 0.045161] pci 0000:02:06.0: reg 10: [io 0xb800-0xb8ff] [ 0.045166] pci 0000:02:06.0: reg 14: [mem 0xff5ffc00-0xff5ffcff] [ 0.045192] pci 0000:02:06.0: supports D1 D2 [ 0.045195] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.045198] pci 0000:02:06.0: PME# disabled [ 0.045216] pci 0000:02:07.0: reg 10: [io 0xb400-0xb41f] [ 0.045242] pci 0000:02:07.0: supports D1 D2 [ 0.045260] pci 0000:02:07.1: reg 10: [io 0xbc00-0xbc07] [ 0.045286] pci 0000:02:07.1: supports D1 D2 [ 0.045304] pci 0000:02:07.2: reg 10: [mem 0xff5ff000-0xff5ff7ff] [ 0.045310] pci 0000:02:07.2: reg 14: [mem 0xff5f8000-0xff5fbfff] [ 0.045336] pci 0000:02:07.2: supports D1 D2 [ 0.045338] pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot [ 0.045342] pci 0000:02:07.2: PME# disabled [ 0.045364] pci 0000:02:08.0: reg 10: [io 0xb000-0xb0ff] [ 0.045392] pci 0000:02:08.0: supports D1 D2 [ 0.045414] pci 0000:00:0e.0: PCI bridge to [bus 02-02] [ 0.045502] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff] [ 0.045505] pci 0000:00:0e.0: bridge window [mem 0xff500000-0xff5fffff] [ 0.045509] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.045516] pci_bus 0000:00: on NUMA node 0 [ 0.045521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.045666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.052026] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.052457] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9 [ 0.052880] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *9 [ 0.053315] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.053764] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11 [ 0.054166] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5 [ 0.054563] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9 [ 0.055013] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10 [ 0.055417] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *3 [ 0.055815] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *7 [ 0.056158] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. [ 0.056579] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. [ 0.057062] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0 [ 0.057466] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled. [ 0.058078] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 [ 0.058470] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.058619] vgaarb: loaded [ 0.058893] SCSI subsystem initialized [ 0.059040] libata version 3.00 loaded. [ 0.059144] usbcore: registered new interface driver usbfs [ 0.059332] usbcore: registered new interface driver hub [ 0.059486] usbcore: registered new device driver usb [ 0.059735] PCI: Using ACPI for IRQ routing [ 0.059825] PCI: pci_cache_line_size set to 64 bytes [ 0.059883] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.059887] reserve RAM buffer: 000000006ffc0000 - 000000006fffffff [ 0.060101] Switching to clocksource tsc [ 0.062500] pnp: PnP ACPI init [ 0.062599] ACPI: bus type pnp registered [ 0.067149] pnp: PnP ACPI: found 11 devices [ 0.067238] ACPI: ACPI bus type pnp unregistered [ 0.067338] system 00:06: [io 0x0190-0x0193] has been reserved [ 0.067426] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.067515] system 00:06: [io 0x4000-0x40ff window] has been reserved [ 0.067604] system 00:06: [io 0x4400-0x44ff window] has been reserved [ 0.067692] system 00:06: [io 0x4800-0x48ff window] has been reserved [ 0.067784] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.067882] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.067971] system 00:07: [mem 0xff780000-0xff7bffff] has been reserved [ 0.068062] system 00:08: [io 0x0480-0x0487] has been reserved [ 0.068150] system 00:08: [io 0x0d00-0x0d07] has been reserved [ 0.068241] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.068330] system 00:0a: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.068419] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.068508] system 00:0a: [mem 0x00100000-0x6fffffff] could not be reserved [ 0.068597] system 00:0a: [mem 0xff7c0000-0xffffffff] has been reserved [ 0.103356] pci 0000:00:0b.0: PCI bridge to [bus 01-01] [ 0.103446] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 0.103537] pci 0000:00:0b.0: bridge window [mem 0xff400000-0xff4fffff] [ 0.103627] pci 0000:00:0b.0: bridge window [mem 0x9eb00000-0xbeafffff pref] [ 0.103775] pci 0000:00:0e.0: PCI bridge to [bus 02-02] [ 0.103866] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff] [ 0.103955] pci 0000:00:0e.0: bridge window [mem 0xff500000-0xff5fffff] [ 0.104044] pci 0000:00:0e.0: bridge window [mem pref disabled] [ 0.104143] pci 0000:00:0e.0: setting latency timer to 64 [ 0.104147] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.104150] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.104153] pci_bus 0000:00: resource 6 [mem 0x70000000-0xffffffff] [ 0.104156] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.104159] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff] [ 0.104162] pci_bus 0000:01: resource 2 [mem 0x9eb00000-0xbeafffff pref] [ 0.104165] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.104168] pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff] [ 0.104203] NET: Registered protocol family 2 [ 0.104334] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.104683] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.106567] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.107149] TCP: Hash tables configured (established 131072 bind 65536) [ 0.107238] TCP reno registered [ 0.107326] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.107430] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.107614] NET: Registered protocol family 1 [ 0.107850] RPC: Registered udp transport module. [ 0.107937] RPC: Registered tcp transport module. [ 0.108024] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.581795] pci 0000:01:00.0: Boot video device [ 0.581808] PCI: CLS 32 bytes, default 64 [ 0.582708] Scanning for low memory corruption every 60 seconds [ 0.583033] audit: initializing netlink socket (disabled) [ 0.583134] type=2000 audit(1281794883.581:1): initialized [ 0.601393] highmem bounce pool size: 64 pages [ 0.601485] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.602794] khelper used greatest stack depth: 7188 bytes left [ 0.605577] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.606211] msgmni has been set to 1731 [ 0.606623] alg: No test for stdrng (krng) [ 0.606860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.607007] io scheduler noop registered [ 0.607093] io scheduler deadline registered (default) [ 0.607192] io scheduler cfq registered [ 0.611418] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.611639] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.612284] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.612619] Floppy drive(s): fd0 is 1.44M [ 0.627290] FDC 0 is a post-1991 82077 [ 0.630215] brd: module loaded [ 0.631395] loop: module loaded [ 0.632089] sata_nv 0000:00:0a.0: version 3.5 [ 0.632487] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22 [ 0.632577] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 [ 0.632678] sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22 [ 0.632922] sata_nv 0000:00:0a.0: setting latency timer to 64 [ 0.633020] scsi0 : sata_nv [ 0.633253] scsi1 : sata_nv [ 0.634066] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22 [ 0.634156] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22 [ 0.634363] pata_amd 0000:00:08.0: version 0.4.1 [ 0.634398] pata_amd 0000:00:08.0: power state changed by ACPI to D0 [ 0.634512] pata_amd 0000:00:08.0: power state changed by ACPI to D0 [ 0.634659] pata_amd 0000:00:08.0: setting latency timer to 64 [ 0.634778] scsi2 : pata_amd [ 0.634972] scsi3 : pata_amd [ 0.635948] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.636037] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.636414] console [netcon0] enabled [ 0.636500] netconsole: network logging started [ 0.636757] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.637090] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 0.637190] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21 [ 0.637360] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.637363] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.637527] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 0.637701] ohci_hcd 0000:00:02.0: irq 21, io mem 0xff6fd000 [ 0.690769] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.690859] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.691005] usb usb1: Product: OHCI Host Controller [ 0.691092] usb usb1: Manufacturer: Linux 2.6.35-gentoo-r1 ohci_hcd [ 0.691180] usb usb1: SerialNumber: 0000:00:02.0 [ 0.691393] hub 1-0:1.0: USB hub found [ 0.691485] hub 1-0:1.0: 4 ports detected [ 0.691891] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20 [ 0.691984] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20 [ 0.692136] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.692139] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 0.692288] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 0.692451] ohci_hcd 0000:00:02.1: irq 20, io mem 0xff6fe000 [ 0.744751] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.744840] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.744985] usb usb2: Product: OHCI Host Controller [ 0.745072] usb usb2: Manufacturer: Linux 2.6.35-gentoo-r1 ohci_hcd [ 0.745160] usb usb2: SerialNumber: 0000:00:02.1 [ 0.745355] hub 2-0:1.0: USB hub found [ 0.745445] hub 2-0:1.0: 4 ports detected [ 0.745646] uhci_hcd: USB Universal Host Controller Interface driver [ 0.746001] PNP: No PS/2 controller found. Probing ports directly. [ 0.748386] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.748477] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.748715] mice: PS/2 mouse device common for all mice [ 0.749026] device-mapper: uevent: version 1.0.3 [ 0.749255] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.749404] cpuidle: using governor ladder [ 0.749490] cpuidle: using governor menu [ 0.750990] usbcore: registered new interface driver usbhid [ 0.751081] usbhid: USB HID core driver [ 0.751343] TCP cubic registered [ 0.751855] NET: Registered protocol family 10 [ 0.752122] IPv6 over IPv4 tunneling driver [ 0.752369] NET: Registered protocol family 17 [ 0.752489] Using IPI Shortcut mode [ 0.792960] ata3.00: ATAPI: LG DVD-ROM DRD-8160B, 1.01, max UDMA/33 [ 0.793165] ata3.01: ATA-7: SAMSUNG SP2514N, VF100-33, max UDMA/100 [ 0.793254] ata3.01: 488397168 sectors, multi 16: LBA48 [ 0.793365] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c6c6c7) ACPI=0x701f (60:20:0x1f) [ 0.793372] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc0c6c6c7) ACPI=0x3f01f (60:20:0x1f) [ 0.798906] ata3.00: configured for UDMA/33 [ 0.801978] ata3.01: configured for UDMA/100 [ 1.057692] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 1.088696] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.092119] ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 [ 1.092208] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.098122] ata1.00: configured for UDMA/133 [ 1.098339] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 [ 1.098845] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.100469] sd 0:0:0:0: [sda] Write Protect is off [ 1.100557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.100581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.100863] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.101031] sda: sda1 sda2 sda3 [ 1.108365] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.193789] usb 2-1: New USB device found, idVendor=0424, idProduct=2504 [ 1.193878] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.196829] hub 2-1:1.0: USB hub found [ 1.199786] hub 2-1:1.0: 4 ports detected [ 1.403653] ata2: SATA link down (SStatus 0 SControl 300) [ 1.404377] scsi 2:0:0:0: CD-ROM LG DVD-ROM DRD8160B 1.01 PQ: 0 ANSI: 5 [ 1.405340] sr0: scsi3-mmc drive: 16x/48x cd/rw xa/form2 cdda tray [ 1.405430] Uniform CD-ROM driver Revision: 3.20 [ 1.405668] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.405699] khelper used greatest stack depth: 7180 bytes left [ 1.405864] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.406085] scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 [ 1.406468] sd 2:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.406676] sd 2:0:1:0: [sdb] Write Protect is off [ 1.406764] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.406787] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.407061] sdb: [ 1.407217] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 1.414827] sdb1 < sdb5 > sdb2 [ 1.415677] sd 2:0:1:0: [sdb] Attached SCSI disk [ 1.473815] usb 2-1.1: new low speed USB device using ohci_hcd and address 3 [ 1.587825] usb 2-1.1: New USB device found, idVendor=0a81, idProduct=0101 [ 1.587915] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.588064] usb 2-1.1: Product: USB Keyboard [ 1.588151] usb 2-1.1: Manufacturer: CHESEN [ 1.600446] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input0 [ 1.600607] generic-usb 0003:0A81:0101.0001: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.1-1.1/input0 [ 1.613902] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input1 [ 1.614058] generic-usb 0003:0A81:0101.0002: input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.1-1.1/input1 [ 1.623242] ata4.00: ATA-7: ST3320820A, 3.AAC, max UDMA/100 [ 1.623331] ata4.00: 625142448 sectors, multi 16: LBA48 [ 1.623623] ata4.01: ATA-7: Hitachi HDT725025VLAT80, V5DOA42A, max UDMA/133 [ 1.623714] ata4.01: 488397168 sectors, multi 16: LBA48 [ 1.623825] ata4: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc0c6c6c7) ACPI=0x3f01f (20:15:0x1f) [ 1.623832] ata4: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc0c6c6c7) ACPI=0x7f01f (20:15:0x1f) [ 1.693836] usb 2-1.2: new low speed USB device using ohci_hcd and address 4 [ 1.698042] ata4.00: configured for UDMA/100 [ 1.704349] ata4.01: configured for UDMA/133 [ 1.704559] scsi 3:0:0:0: Direct-Access ATA ST3320820A 3.AA PQ: 0 ANSI: 5 [ 1.704938] sd 3:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.705143] sd 3:0:0:0: [sdc] Write Protect is off [ 1.705231] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.705255] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.705566] sdc: [ 1.705753] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.745903] sdc1 sdc2 [ 1.746127] scsi 3:0:1:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5 [ 1.746555] sd 3:0:1:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.746748] sd 3:0:1:0: [sdd] Write Protect is off [ 1.746836] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.746858] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.747124] sdd: [ 1.747401] sd 3:0:1:0: Attached scsi generic sg4 type 0 [ 1.753011] sdd1 [ 1.753248] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.753525] sd 3:0:1:0: [sdd] Attached SCSI disk [ 1.776546] EXT3-fs: barriers not enabled [ 1.786694] EXT3-fs (sda3): mounted filesystem with writeback data mode [ 1.786844] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 1.786956] Freeing unused kernel memory: 368k freed [ 1.787613] kjournald starting. Commit interval 5 seconds [ 1.808848] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c50e [ 1.808939] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.809089] usb 2-1.2: Product: USB RECEIVER [ 1.809176] usb 2-1.2: Manufacturer: Logitech [ 1.820781] khelper used greatest stack depth: 7084 bytes left [ 1.835659] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input2 [ 1.835877] generic-usb 0003:046D:C50E.0003: input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.1-1.2/input0 [ 1.916861] usb 2-1.3: new full speed USB device using ohci_hcd and address 5 [ 2.023871] usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0606 [ 2.023963] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.024112] usb 2-1.3: Product: USB2.0 Hub [ 2.026916] hub 2-1.3:1.0: USB hub found [ 2.029869] hub 2-1.3:1.0: 4 ports detected [ 2.334904] usb 2-1.3.1: new low speed USB device using ohci_hcd and address 6 [ 2.423918] usb 2-1.3.1: New USB device found, idVendor=062a, idProduct=0001 [ 2.424018] usb 2-1.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.434466] input: HID 062a:0001 as /devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/input/input3 [ 2.434676] generic-usb 0003:062A:0001.0004: input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:02.1-1.3.1/input0 [ 2.506919] usb 2-1.3.4: new full speed USB device using ohci_hcd and address 7 [ 2.636939] usb 2-1.3.4: New USB device found, idVendor=0a12, idProduct=0001 [ 2.637035] usb 2-1.3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.746044] async/0 used greatest stack depth: 6784 bytes left [ 2.753017] async/4 used greatest stack depth: 6648 bytes left [ 2.753118] async/2 used greatest stack depth: 6320 bytes left [ 3.077634] loadkeys used greatest stack depth: 5880 bytes left [ 3.078031] init-early.sh used greatest stack depth: 5664 bytes left [ 6.072480] udev: starting version 151 [ 6.454041] Linux agpgart interface v0.103 [ 6.491484] ACPI: resource nForce2_smbus [io 0x5000-0x503f] conflicts with ACPI region SMRG [??? 0x00005000-0x00005004 flags 0x47] [ 6.491490] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.491563] i2c i2c-0: adapter [SMBus nForce2 adapter at 5040] registered [ 6.491569] i2c i2c-0: nForce2 SMBus adapter at 0x5040 [ 6.654650] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] [ 6.654660] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 6.654667] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP [ 6.654673] agpgart-amd64 0000:00:00.0: aperture base > 4G [ 6.654819] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] [ 6.654825] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 6.654828] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP [ 6.654831] agpgart-amd64 0000:00:00.0: aperture base > 4G [ 6.654894] agpgart-amd64 0000:01:00.0: AGP bridge [1002/9587] [ 6.654902] agpgart-amd64 0000:01:00.0: aperture size 4096 MB is not right, using settings from NB [ 6.678177] agpgart-amd64 0000:01:00.0: AGP aperture is 512M @ 0xc0000000 [ 6.710475] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 6.710562] ACPI: Power Button [PWRB] [ 6.710910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 6.710982] ACPI: Power Button [PWRF] [ 6.714030] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 6.714392] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 6.714408] via-rhine 0000:02:06.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 6.740452] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 6.740792] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 [ 6.740799] forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 22 (level, low) -> IRQ 22 [ 6.740805] forcedeth 0000:00:05.0: setting latency timer to 64 [ 6.740888] nv_probe: set workaround bit for reversed mac addr [ 6.741316] eth0: VIA Rhine III at 0xff5ffc00, 00:40:f4:6d:64:d8, IRQ 19. [ 6.742029] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 6.909398] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 [ 6.909416] ohci1394 0000:02:07.2: PCI INT B -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 [ 6.960058] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[ff5ff000-ff5ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.094844] ACPI: acpi_idle registered with cpuidle [ 7.113780] Bluetooth: Core ver 2.15 [ 7.113913] NET: Registered protocol family 31 [ 7.113916] Bluetooth: HCI device and connection manager initialized [ 7.113920] Bluetooth: HCI socket layer initialized [ 7.141452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.141457] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 7.151689] gameport gameport0: EMU10K1 is pci0000:02:07.1/gameport0, io 0xbc00, speed 59659kHz [ 7.253401] forcedeth 0000:00:05.0: ifname eth1, PHY OUI 0x90c3 @ 1, addr 00:15:f2:3b:00:2a [ 7.253408] forcedeth 0000:00:05.0: csum timirq lnktim desc-v2 [ 7.254027] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 [ 7.254034] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21 [ 7.254075] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 7.254079] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 7.254164] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 7.254202] ehci_hcd 0000:00:02.2: debug port 1 [ 7.254208] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported [ 7.254219] ehci_hcd 0000:00:02.2: irq 21, io mem 0xff6ffc00 [ 7.254490] usb 2-1: USB disconnect, address 2 [ 7.254492] usb 2-1.1: USB disconnect, address 3 [ 7.260028] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 7.260085] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.260089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.260093] usb usb3: Product: EHCI Host Controller [ 7.260095] usb usb3: Manufacturer: Linux 2.6.35-gentoo-r1 ehci_hcd [ 7.260097] usb usb3: SerialNumber: 0000:00:02.2 [ 7.260235] hub 3-0:1.0: USB hub found [ 7.260242] hub 3-0:1.0: 8 ports detected [ 7.265190] rtc_cmos 00:02: RTC can wake from S4 [ 7.265272] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 7.265298] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 7.267232] usb 2-1.2: USB disconnect, address 4 [ 7.271391] usb 2-1.3: USB disconnect, address 5 [ 7.271397] usb 2-1.3.1: USB disconnect, address 6 [ 7.275225] usb 2-1.3.4: USB disconnect, address 7 [ 7.419459] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 7.419601] usbcore: registered new interface driver btusb [ 7.562027] usb 3-3: new high speed USB device using ehci_hcd and address 2 [ 7.613669] C-Media PCI 0000:02:08.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 [ 7.676409] usb 3-3: New USB device found, idVendor=0424, idProduct=2504 [ 7.676415] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.677049] hub 3-3:1.0: USB hub found [ 7.677152] hub 3-3:1.0: 4 ports detected [ 7.702732] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20 [ 7.702743] Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI 20 (level, low) -> IRQ 20 [ 7.702795] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 7.751900] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17 [ 7.751918] EMU10K1_Audigy 0000:02:07.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17 [ 7.957019] usb 3-3.1: new low speed USB device using ehci_hcd and address 3 [ 8.017009] intel8x0_measure_ac97_clock: measured 50848 usecs (2504 samples) [ 8.017014] intel8x0: clocking to 46787 [ 8.051440] usb 3-3.1: New USB device found, idVendor=0a81, idProduct=0101 [ 8.051446] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.051449] usb 3-3.1: Product: USB Keyboard [ 8.051452] usb 3-3.1: Manufacturer: CHESEN [ 8.056938] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.2/usb3/3-3/3-3.1/3-3.1:1.0/input/input6 [ 8.057055] generic-usb 0003:0A81:0101.0005: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.2-3.1/input0 [ 8.064282] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.2/usb3/3-3/3-3.1/3-3.1:1.1/input/input7 [ 8.064354] generic-usb 0003:0A81:0101.0006: input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.2-3.1/input1 [ 8.137093] usb 3-3.2: new low speed USB device using ehci_hcd and address 4 [ 8.173429] [drm] Initialized drm 1.1.0 20060810 [ 8.220299] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0030020824] [ 8.233078] usb 3-3.2: New USB device found, idVendor=046d, idProduct=c50e [ 8.233084] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.233087] usb 3-3.2: Product: USB RECEIVER [ 8.233090] usb 3-3.2: Manufacturer: Logitech [ 8.242772] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.2/usb3/3-3/3-3.2/3-3.2:1.0/input/input8 [ 8.242913] generic-usb 0003:046D:C50E.0007: input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.2-3.2/input0 [ 8.319995] usb 3-3.3: new high speed USB device using ehci_hcd and address 5 [ 8.406221] usb 3-3.3: New USB device found, idVendor=05e3, idProduct=0606 [ 8.406227] usb 3-3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.406231] usb 3-3.3: Product: USB2.0 Hub [ 8.406953] hub 3-3.3:1.0: USB hub found [ 8.407218] hub 3-3.3:1.0: 4 ports detected [ 8.611432] [drm] radeon defaulting to kernel modesetting. [ 8.611437] [drm] radeon kernel modesetting enabled. [ 8.611441] [drm:drm_init], [ 8.682267] usb 3-3.3.1: new low speed USB device using ehci_hcd and address 6 [ 8.759250] usb 3-3.3.1: New USB device found, idVendor=062a, idProduct=0001 [ 8.759255] usb 3-3.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.763877] input: HID 062a:0001 as /devices/pci0000:00/0000:00:02.2/usb3/3-3/3-3.3/3-3.3.1/3-3.3.1:1.0/input/input9 [ 8.763956] generic-usb 0003:062A:0001.0008: input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:02.2-3.3.1/input0 [ 8.839267] usb 3-3.3.4: new full speed USB device using ehci_hcd and address 7 [ 8.970274] usb 3-3.3.4: New USB device found, idVendor=0a12, idProduct=0001 [ 8.970277] usb 3-3.3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.634661] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9.634668] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 9.634674] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 9.634682] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 9.634691] end_request: I/O error, dev sr0, sector 4096 [ 9.634696] Buffer I/O error on device sr0, logical block 1024 [ 11.560940] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 11.560944] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 11.560948] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 11.560953] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 11.560961] end_request: I/O error, dev sr0, sector 4096 [ 11.560964] Buffer I/O error on device sr0, logical block 1024 [ 13.979463] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 13.979471] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 13.979477] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 13.979486] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 13.979495] end_request: I/O error, dev sr0, sector 4096 [ 13.979499] Buffer I/O error on device sr0, logical block 1024 [ 15.910111] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 15.910115] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 15.910120] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 15.910125] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 15.910134] end_request: I/O error, dev sr0, sector 4096 [ 15.910137] Buffer I/O error on device sr0, logical block 1024 [ 16.875887] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00) [ 16.875997] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 [ 16.876009] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 16.876012] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 16.926159] Marking TSC unstable due to cpufreq changes [ 16.926394] Switching to clocksource acpi_pm [ 1297.429301] EXT3-fs (sda3): using internal journal [ 1297.623114] EXT3-fs: barriers not enabled [ 1297.623539] EXT3-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended [ 1297.623703] kjournald starting. Commit interval 5 seconds [ 1297.623799] EXT3-fs (sdb2): using internal journal [ 1297.623808] EXT3-fs (sdb2): mounted filesystem with writeback data mode [ 1297.647174] EXT3-fs: barriers not enabled [ 1297.656409] EXT3-fs (sdc2): warning: maximal mount count reached, running e2fsck is recommended [ 1297.656601] kjournald starting. Commit interval 5 seconds [ 1297.656785] EXT3-fs (sdc2): using internal journal [ 1297.656793] EXT3-fs (sdc2): mounted filesystem with writeback data mode [ 1297.678347] EXT3-fs: barriers not enabled [ 1297.685229] EXT3-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended [ 1297.685391] kjournald starting. Commit interval 5 seconds [ 1297.685478] EXT3-fs (sdd1): using internal journal [ 1297.685486] EXT3-fs (sdd1): mounted filesystem with writeback data mode [ 1305.950145] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1305.950157] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1305.950166] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1305.950180] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1305.950197] end_request: I/O error, dev sr0, sector 4096 [ 1305.950204] Buffer I/O error on device sr0, logical block 1024 [ 1307.911331] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1307.911340] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1307.911349] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1307.911360] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1307.911377] end_request: I/O error, dev sr0, sector 4096 [ 1307.911384] Buffer I/O error on device sr0, logical block 1024 [ 1309.856902] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1309.856911] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1309.856919] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1309.856931] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1309.856948] end_request: I/O error, dev sr0, sector 4096 [ 1309.856954] Buffer I/O error on device sr0, logical block 1024 [ 1311.786721] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1311.786730] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1311.786738] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1311.786749] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1311.786766] end_request: I/O error, dev sr0, sector 4096 [ 1311.786772] Buffer I/O error on device sr0, logical block 1024 [ 1313.764018] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1313.764027] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1313.764035] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1313.764046] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1313.764063] end_request: I/O error, dev sr0, sector 4096 [ 1313.764069] Buffer I/O error on device sr0, logical block 1024 [ 1315.698337] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1315.698345] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1315.698354] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1315.698365] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1315.698382] end_request: I/O error, dev sr0, sector 4096 [ 1315.698388] Buffer I/O error on device sr0, logical block 1024 [ 1317.639509] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1317.639516] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1317.639523] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1317.639533] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1317.639548] end_request: I/O error, dev sr0, sector 4096 [ 1317.639554] Buffer I/O error on device sr0, logical block 1024 [ 1317.908414] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1317.908422] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1317.908430] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1317.908441] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 03 fe 00 00 02 00 [ 1317.908456] end_request: I/O error, dev sr0, sector 4088 [ 1317.908462] Buffer I/O error on device sr0, logical block 1022 [ 1317.908468] Buffer I/O error on device sr0, logical block 1023 [ 1319.869891] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1319.869900] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1319.869908] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1319.869919] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1319.869936] end_request: I/O error, dev sr0, sector 4096 [ 1319.869943] Buffer I/O error on device sr0, logical block 1024 [ 1321.815700] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1321.815708] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1321.815713] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1321.815723] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1321.815732] end_request: I/O error, dev sr0, sector 4096 [ 1321.815736] Buffer I/O error on device sr0, logical block 1024 [ 1322.319120] Adding 2000088k swap on /dev/sda2. Priority:-1 extents:1 across:2000088k [ 1322.612904] hdparm used greatest stack depth: 5608 bytes left [ 1323.950640] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1323.950653] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1323.950662] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1323.950677] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1323.950693] end_request: I/O error, dev sr0, sector 4096 [ 1323.950702] Buffer I/O error on device sr0, logical block 1024 [ 1324.240307] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1324.296618] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1324.297672] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1324.297680] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1324.297685] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1325.975471] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1325.975482] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1325.975492] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1325.975505] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1325.975522] end_request: I/O error, dev sr0, sector 4096 [ 1325.975530] Buffer I/O error on device sr0, logical block 1024 [ 1327.921182] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1327.921190] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1327.921197] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1327.921207] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1327.921222] end_request: I/O error, dev sr0, sector 4096 [ 1327.921227] Buffer I/O error on device sr0, logical block 1024 [ 1329.882725] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1329.882732] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1329.882740] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1329.882750] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1329.882765] end_request: I/O error, dev sr0, sector 4096 [ 1329.882770] Buffer I/O error on device sr0, logical block 1024 [ 1331.817229] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1331.817239] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1331.817248] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1331.817259] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1331.817274] end_request: I/O error, dev sr0, sector 4096 [ 1331.817281] Buffer I/O error on device sr0, logical block 1024 [ 1333.742673] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1333.742680] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1333.742687] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1333.742697] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1333.742712] end_request: I/O error, dev sr0, sector 4096 [ 1333.742718] Buffer I/O error on device sr0, logical block 1024 [ 1335.076205] Bluetooth: L2CAP ver 2.14 [ 1335.076210] Bluetooth: L2CAP socket layer initialized [ 1335.088053] Bluetooth: RFCOMM TTY layer initialized [ 1335.088061] Bluetooth: RFCOMM socket layer initialized [ 1335.088064] Bluetooth: RFCOMM ver 1.11 [ 1335.394021] eth1: no IPv6 routers present [ 1335.657361] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1335.657369] Bluetooth: BNEP filters: protocol multicast [ 1335.704304] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1335.704315] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1335.704325] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1335.704338] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1335.704354] end_request: I/O error, dev sr0, sector 4096 [ 1335.704362] Buffer I/O error on device sr0, logical block 1024 [ 1335.721230] Bluetooth: SCO (Voice Link) ver 0.6 [ 1335.721238] Bluetooth: SCO socket layer initialized [ 1335.973271] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1335.973283] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1335.973293] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1335.973306] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 03 fe 00 00 02 00 [ 1335.973323] end_request: I/O error, dev sr0, sector 4088 [ 1335.973331] Buffer I/O error on device sr0, logical block 1022 [ 1335.973338] Buffer I/O error on device sr0, logical block 1023 [ 1337.903131] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1337.903140] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1337.903146] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1337.903157] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1337.903165] end_request: I/O error, dev sr0, sector 4096 [ 1337.903171] Buffer I/O error on device sr0, logical block 1024 [ 1338.464533] it87: Found IT8712F chip at 0xd00, revision 7 [ 1338.464544] it87: VID is disabled (pins used for GPIO) [ 1338.464553] it87: in3 is VCC (+5V) [ 1338.464555] it87: in7 is VCCH (+5V Stand-By) [ 1339.833084] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1339.833096] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1339.833106] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1339.833119] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1339.833136] end_request: I/O error, dev sr0, sector 4096 [ 1339.833144] Buffer I/O error on device sr0, logical block 1024 [ 1340.027324] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1340.027331] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1340.027338] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1340.027348] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 03 fe 00 00 02 00 [ 1340.027363] end_request: I/O error, dev sr0, sector 4088 [ 1340.027369] Buffer I/O error on device sr0, logical block 1022 [ 1340.027374] Buffer I/O error on device sr0, logical block 1023 [ 1342.204505] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1342.204517] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 1342.204526] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 1342.204539] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 01 00 [ 1342.204555] end_request: I/O error, dev sr0, sector 4096 [ 1342.204564] Buffer I/O error on device sr0, logical block 1024 [ 1353.195963] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 16 [ 1353.195989] agpgart-amd64 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 16 (level, low) -> IRQ 16