[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35.2 (root@maja) (gcc version 4.4.5 20100728 (prerelease) (Debian 4.4.4-8) ) #1 SMP Tue Aug 17 19:15:44 CEST 2010 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35.2 root=UUID=3a8691ba-c9d8-4160-91b0-5ad1208fbd31 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfee0000 (reserved) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee1000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 1C0000000 mask FC0000000 uncachable [ 0.000000] 5 base 1B0000000 mask FF0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f5ed0] f5ed0 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000 [ 0.000000] 0000000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfde0000 page 4k [ 0.000000] kernel direct mapping tables up to cfde0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000 [ 0.000000] 0100000000 - 01b0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1b0000000 @ c000-14000 [ 0.000000] RAMDISK: 37da1000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f7890 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee1040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee1180 04991 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: HPET 00000000cfee5d00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee5d80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000cfee5dc0 00470 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000cfee6230 00AE2 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000cfee5b80 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cfee6d20 02FE4 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001b0000000 [ 0.000000] Initmem setup node 0 0000000000000000-00000001b0000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880100200000-ffff8801057fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001b0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000cfde0 [ 0.000000] 0: 0x00100000 -> 0x001b0000 [ 0.000000] On node 0 totalpages: 1572220 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3940 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31 [ 0.000000] Normal zone: 9856 pages used for memmap [ 0.000000] Normal zone: 711040 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [7000 - 77ff] [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfee0000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee1000 [ 0.000000] PM: Registered nosave memory: 00000000cfee1000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:24100000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880002000000 s78912 r8192 d23488 u262144 [ 0.000000] pcpu-alloc: s78912 r8192 d23488 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] early_res array is doubled to 128 at [f000 - ffff] [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548028 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35.2 root=UUID=3a8691ba-c9d8-4160-91b0-5ad1208fbd31 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Subtract (61 early reservations) [ 0.000000] #1 [0001000000 - 0001e72404] TEXT DATA BSS [ 0.000000] #2 [0037da1000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001e73000 - 0001e730f6] BRK [ 0.000000] #4 [00000f5ee0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f5ed0 - 00000f5ee0] MP-table mpf [ 0.000000] #6 [000009dc00 - 00000f0d00] BIOS reserved [ 0.000000] #7 [00000f0f24 - 00000f5ed0] BIOS reserved [ 0.000000] #8 [00000f0d00 - 00000f0f24] MP-table mpc [ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE [ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP [ 0.000000] #11 [0000008000 - 000000c000] PGTABLE [ 0.000000] #12 [000000c000 - 000000f000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001e73100 - 0001e74100] BOOTMEM [ 0.000000] #15 [0001e72440 - 0001e728c0] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0105800000] MEMMAP 0 [ 0.000000] #19 [0001e728c0 - 0001e72a40] BOOTMEM [ 0.000000] #20 [0001e74100 - 0001e8c100] BOOTMEM [ 0.000000] #21 [0001e8c100 - 0001ea4100] BOOTMEM [ 0.000000] #22 [0001ea5000 - 0001ea6000] BOOTMEM [ 0.000000] #23 [0001e72a40 - 0001e72a81] BOOTMEM [ 0.000000] #24 [0001e72ac0 - 0001e72b03] BOOTMEM [ 0.000000] #25 [0001e72b40 - 0001e72de0] BOOTMEM [ 0.000000] #26 [0001e72e00 - 0001e72e68] BOOTMEM [ 0.000000] #27 [0001e72e80 - 0001e72ee8] BOOTMEM [ 0.000000] #28 [0001e72f00 - 0001e72f68] BOOTMEM [ 0.000000] #29 [0001e72f80 - 0001e72fe8] BOOTMEM [ 0.000000] #30 [0001ea4100 - 0001ea4168] BOOTMEM [ 0.000000] #31 [0001ea4180 - 0001ea41e8] BOOTMEM [ 0.000000] #32 [0001ea4200 - 0001ea4268] BOOTMEM [ 0.000000] #33 [0001ea4280 - 0001ea42e8] BOOTMEM [ 0.000000] #34 [0001ea4300 - 0001ea4368] BOOTMEM [ 0.000000] #35 [0001ea4380 - 0001ea43e8] BOOTMEM [ 0.000000] #36 [0001ea4400 - 0001ea4468] BOOTMEM [ 0.000000] #37 [0001ea4480 - 0001ea44a0] BOOTMEM [ 0.000000] #38 [0001ea44c0 - 0001ea44e0] BOOTMEM [ 0.000000] #39 [0001ea4500 - 0001ea4554] BOOTMEM [ 0.000000] #40 [0001ea4580 - 0001ea45d4] BOOTMEM [ 0.000000] #41 [0002000000 - 000201b000] BOOTMEM [ 0.000000] #42 [0002040000 - 000205b000] BOOTMEM [ 0.000000] #43 [0002080000 - 000209b000] BOOTMEM [ 0.000000] #44 [00020c0000 - 00020db000] BOOTMEM [ 0.000000] #45 [0002100000 - 000211b000] BOOTMEM [ 0.000000] #46 [0002140000 - 000215b000] BOOTMEM [ 0.000000] #47 [0002180000 - 000219b000] BOOTMEM [ 0.000000] #48 [00021c0000 - 00021db000] BOOTMEM [ 0.000000] #49 [0001ea4600 - 0001ea4608] BOOTMEM [ 0.000000] #50 [0001ea4640 - 0001ea4648] BOOTMEM [ 0.000000] #51 [0001ea4680 - 0001ea46a0] BOOTMEM [ 0.000000] #52 [0001ea46c0 - 0001ea4700] BOOTMEM [ 0.000000] #53 [0001ea4700 - 0001ea4820] BOOTMEM [ 0.000000] #54 [0001ea4840 - 0001ea4888] BOOTMEM [ 0.000000] #55 [0001ea48c0 - 0001ea4908] BOOTMEM [ 0.000000] #56 [0001ea6000 - 0001eae000] BOOTMEM [ 0.000000] #57 [00021db000 - 00061db000] BOOTMEM [ 0.000000] #58 [0001eae000 - 0001ece000] BOOTMEM [ 0.000000] #59 [0001ece000 - 0001f0e000] BOOTMEM [ 0.000000] #60 [0000010000 - 0000018000] BOOTMEM [ 0.000000] Memory: 6116524k/7077888k available (8124k kernel code, 789008k absent, 172356k reserved, 5277k data, 604k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:512 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 62914560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2698.737 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5397.47 BogoMIPS (lpj=2698737) [ 0.000140] pid_max: default: 32768 minimum: 301 [ 0.000215] Security Framework initialized [ 0.000279] SELinux: Initializing. [ 0.000344] SELinux: Starting in permissive mode [ 0.000853] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002601] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003405] Mount-cache hash table entries: 256 [ 0.003550] Initializing cgroup subsys ns [ 0.003615] Initializing cgroup subsys cpuacct [ 0.003679] Initializing cgroup subsys memory [ 0.003744] Initializing cgroup subsys devices [ 0.003807] Initializing cgroup subsys freezer [ 0.003870] Initializing cgroup subsys net_cls [ 0.003946] CPU: Physical Processor ID: 0 [ 0.004007] CPU: Processor Core ID: 0 [ 0.004071] mce: CPU supports 9 MCE banks [ 0.004148] CPU0: Thermal monitoring enabled (TM1) [ 0.004215] using mwait in idle threads. [ 0.004276] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. [ 0.004424] ... version: 3 [ 0.004485] ... bit width: 48 [ 0.004547] ... generic registers: 4 [ 0.004609] ... value mask: 0000ffffffffffff [ 0.004673] ... max period: 000000007fffffff [ 0.004737] ... fixed-purpose events: 3 [ 0.004798] ... event mask: 000000070000000f [ 0.004917] ACPI: Core revision 20100428 [ 0.010172] Setting APIC routing to flat [ 0.010562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020616] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.122033] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. [ 0.758269] Brought up 8 CPUs [ 0.758332] Total of 8 processors activated (43173.07 BogoMIPS). [ 0.761318] khelper used greatest stack depth: 6024 bytes left [ 0.761495] xor: automatically using best checksumming function: generic_sse [ 0.766129] generic_sse: 10572.000 MB/sec [ 0.766191] xor: using function: generic_sse (10572.000 MB/sec) [ 0.766259] regulator: core version 0.5 [ 0.766353] Time: 19:21:18 Date: 08/17/10 [ 0.766436] NET: Registered protocol family 16 [ 0.766702] ACPI: bus type pci registered [ 0.766826] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.766927] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.773018] PCI: Using configuration type 1 for base access [ 0.777283] bio: create slab at 0 [ 0.778002] ACPI: EC: Look up EC in DSDT [ 0.782454] ACPI: Interpreter enabled [ 0.782517] ACPI: (supports S0 S3 S4 S5) [ 0.782694] ACPI: Using IOAPIC for interrupt routing [ 0.787155] ACPI Warning: Incorrect checksum in table [TAMG] - 0x60, should be 0x5F (20100428/tbutils-314) [ 0.787392] ACPI: No dock devices found. [ 0.787454] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.787621] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.787828] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.787896] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.787962] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.788059] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.788158] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] [ 0.788302] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.788305] pci 0000:00:00.0: PME# disabled [ 0.788354] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.788357] pci 0000:00:01.0: PME# disabled [ 0.788407] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.788410] pci 0000:00:03.0: PME# disabled [ 0.788460] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.788463] pci 0000:00:07.0: PME# disabled [ 0.788512] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.788514] pci 0000:00:09.0: PME# disabled [ 0.788677] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff] [ 0.788703] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.788705] pci 0000:00:13.0: PME# disabled [ 0.788888] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 0.788943] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 0.788998] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 0.789052] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 0.789099] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.789102] pci 0000:00:1a.7: PME# disabled [ 0.789131] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit] [ 0.789168] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.789170] pci 0000:00:1b.0: PME# disabled [ 0.789226] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.789228] pci 0000:00:1c.0: PME# disabled [ 0.789285] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.789288] pci 0000:00:1c.1: PME# disabled [ 0.789346] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.789348] pci 0000:00:1c.4: PME# disabled [ 0.789404] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.789407] pci 0000:00:1c.5: PME# disabled [ 0.789449] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 0.789504] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 0.789559] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 0.789614] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff] [ 0.789661] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.789664] pci 0000:00:1d.7: PME# disabled [ 0.789762] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.789861] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.789930] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.790028] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.790172] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907] [ 0.790177] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803] [ 0.790181] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707] [ 0.790185] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603] [ 0.790189] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f] [ 0.790193] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff] [ 0.790220] pci 0000:00:1f.2: PME# supported from D3hot [ 0.790222] pci 0000:00:1f.2: PME# disabled [ 0.790245] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit] [ 0.790256] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.790302] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.790368] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.790370] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.790374] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.790420] pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.790427] pci 0000:02:00.0: reg 18: [mem 0xfb8e0000-0xfb8effff 64bit] [ 0.790431] pci 0000:02:00.0: reg 20: [io 0xce00-0xceff] [ 0.790438] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.790453] pci 0000:02:00.0: supports D1 D2 [ 0.790477] pci 0000:02:00.1: reg 10: [mem 0xfb8fc000-0xfb8fffff 64bit] [ 0.790506] pci 0000:02:00.1: supports D1 D2 [ 0.790518] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 0.790584] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.790586] pci 0000:00:03.0: bridge window [mem 0xfb800000-0xfb8fffff] [ 0.790590] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.790639] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.790648] pci 0000:03:00.0: reg 18: [mem 0xfbae0000-0xfbaeffff 64bit] [ 0.790653] pci 0000:03:00.0: reg 20: [io 0xde00-0xdeff] [ 0.790661] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.790679] pci 0000:03:00.0: supports D1 D2 [ 0.790709] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit] [ 0.790745] pci 0000:03:00.1: supports D1 D2 [ 0.790759] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.790824] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.790827] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.790831] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.790861] pci 0000:00:09.0: PCI bridge to [bus 04-04] [ 0.790926] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.790929] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.790933] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.790967] pci 0000:00:1c.0: PCI bridge to [bus 05-05] [ 0.791033] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.791036] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.791040] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.791141] pci 0000:06:00.0: reg 24: [mem 0xfb7fe000-0xfb7fffff] [ 0.791178] pci 0000:06:00.0: PME# supported from D3hot [ 0.791182] pci 0000:06:00.0: PME# disabled [ 0.791224] pci 0000:06:00.1: reg 10: [io 0xbf00-0xbf07] [ 0.791232] pci 0000:06:00.1: reg 14: [io 0xbe00-0xbe03] [ 0.791239] pci 0000:06:00.1: reg 18: [io 0xbd00-0xbd07] [ 0.791247] pci 0000:06:00.1: reg 1c: [io 0xbc00-0xbc03] [ 0.791254] pci 0000:06:00.1: reg 20: [io 0xbb00-0xbb0f] [ 0.791309] pci 0000:00:1c.1: PCI bridge to [bus 06-06] [ 0.791374] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.791377] pci 0000:00:1c.1: bridge window [mem 0xfb700000-0xfb7fffff] [ 0.791381] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.791440] pci 0000:07:00.0: reg 10: [io 0xae00-0xaeff] [ 0.791458] pci 0000:07:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref] [ 0.791470] pci 0000:07:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref] [ 0.791477] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.791513] pci 0000:07:00.0: supports D1 D2 [ 0.791514] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.791518] pci 0000:07:00.0: PME# disabled [ 0.791541] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 0.791607] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff] [ 0.791610] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.791615] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 0.791673] pci 0000:08:00.0: reg 10: [io 0xee00-0xeeff] [ 0.791691] pci 0000:08:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit pref] [ 0.791703] pci 0000:08:00.0: reg 20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref] [ 0.791710] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.791746] pci 0000:08:00.0: supports D1 D2 [ 0.791747] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.791751] pci 0000:08:00.0: PME# disabled [ 0.791774] pci 0000:00:1c.5: PCI bridge to [bus 08-08] [ 0.791840] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.791843] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.791847] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 0.791891] pci 0000:09:06.0: reg 10: [mem 0xfb9ff000-0xfb9ff7ff] [ 0.791897] pci 0000:09:06.0: reg 14: [mem 0xfb9f8000-0xfb9fbfff] [ 0.791935] pci 0000:09:06.0: supports D1 D2 [ 0.791936] pci 0000:09:06.0: PME# supported from D0 D1 D2 D3hot [ 0.791939] pci 0000:09:06.0: PME# disabled [ 0.791972] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode) [ 0.792041] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.792043] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.792048] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.792049] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.792051] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.792052] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.792054] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.792055] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.792086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.792209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.792244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.792292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.792325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.792359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.811978] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.812482] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.812980] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.813482] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.813981] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.814538] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.815036] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.815537] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.816011] HEST: Table is not found! [ 0.816154] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.816255] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none [ 0.816354] vgaarb: loaded [ 0.816492] SCSI subsystem initialized [ 0.816642] libata version 3.00 loaded. [ 0.816725] usbcore: registered new interface driver usbfs [ 0.816808] usbcore: registered new interface driver hub [ 0.816899] usbcore: registered new device driver usb [ 0.833116] raid6: int64x1 2582 MB/s [ 0.850087] raid6: int64x2 3230 MB/s [ 0.867069] raid6: int64x4 2226 MB/s [ 0.884049] raid6: int64x8 2433 MB/s [ 0.901010] raid6: sse2x1 7011 MB/s [ 0.917990] raid6: sse2x2 8226 MB/s [ 0.934967] raid6: sse2x4 9167 MB/s [ 0.935028] raid6: using algorithm sse2x4 (9167 MB/s) [ 0.935133] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.935199] PCI: Using ACPI for IRQ routing [ 0.935262] PCI: pci_cache_line_size set to 64 bytes [ 0.935361] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.935363] reserve RAM buffer: 00000000cfde0000 - 00000000cfffffff [ 0.935451] Bluetooth: Core ver 2.15 [ 0.935529] NET: Registered protocol family 31 [ 0.935592] Bluetooth: HCI device and connection manager initialized [ 0.935658] Bluetooth: HCI socket layer initialized [ 0.935763] cfg80211: Calling CRDA to update world regulatory domain [ 0.935855] NetLabel: Initializing [ 0.935916] NetLabel: domain hash size = 128 [ 0.935981] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.936053] NetLabel: unlabeled traffic allowed by default [ 0.936155] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.936225] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.936419] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.943109] Switching to clocksource tsc [ 0.943201] pnp: PnP ACPI init [ 0.943265] ACPI: bus type pnp registered [ 0.944706] pnp: PnP ACPI: found 11 devices [ 0.944769] ACPI: ACPI bus type pnp unregistered [ 0.944836] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.944901] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.944969] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.945035] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.945101] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.945169] system 00:07: [io 0x0400-0x04cf] could not be reserved [ 0.945235] system 00:07: [io 0x04d2-0x04ff] has been reserved [ 0.945301] system 00:08: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.945369] system 00:09: [mem 0x000d6000-0x000d7fff] has been reserved [ 0.945436] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.945503] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.945571] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.945638] system 00:09: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.945705] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.945773] system 00:09: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.945840] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.945907] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.945976] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.946042] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.946109] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.946176] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.946243] system 00:09: [mem 0x000e0000-0x000effff] has been reserved [ 0.951111] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff] [ 0.951179] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.951277] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.951375] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.951441] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.951505] pci 0000:00:01.0: bridge window [io disabled] [ 0.951572] pci 0000:00:01.0: bridge window [mem disabled] [ 0.951638] pci 0000:00:01.0: bridge window [mem pref disabled] [ 0.951706] pci 0000:02:00.0: BAR 6: assigned [mem 0xfb800000-0xfb81ffff pref] [ 0.951803] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 0.951868] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.951935] pci 0000:00:03.0: bridge window [mem 0xfb800000-0xfb8fffff] [ 0.952005] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.952105] pci 0000:03:00.0: BAR 6: assigned [mem 0xfba00000-0xfba1ffff pref] [ 0.952202] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.952821] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.952888] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.952958] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.953058] pci 0000:00:09.0: PCI bridge to [bus 04-04] [ 0.953122] pci 0000:00:09.0: bridge window [io disabled] [ 0.953189] pci 0000:00:09.0: bridge window [mem disabled] [ 0.953254] pci 0000:00:09.0: bridge window [mem pref disabled] [ 0.953322] pci 0000:00:1c.0: PCI bridge to [bus 05-05] [ 0.953387] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.953455] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.953524] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.953624] pci 0000:00:1c.1: PCI bridge to [bus 06-06] [ 0.953689] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.953757] pci 0000:00:1c.1: bridge window [mem 0xfb700000-0xfb7fffff] [ 0.953825] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.953925] pci 0000:07:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd1ffff pref] [ 0.954023] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 0.954088] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff] [ 0.954156] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.954224] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 0.954325] pci 0000:08:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref] [ 0.954422] pci 0000:00:1c.5: PCI bridge to [bus 08-08] [ 0.954486] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.954555] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.954623] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 0.954724] pci 0000:00:1e.0: PCI bridge to [bus 09-09] [ 0.954787] pci 0000:00:1e.0: bridge window [io disabled] [ 0.954854] pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.954922] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.954999] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.955068] pci 0000:00:01.0: setting latency timer to 64 [ 0.955074] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.955142] pci 0000:00:03.0: setting latency timer to 64 [ 0.955146] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.955214] pci 0000:00:07.0: setting latency timer to 64 [ 0.955219] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.955287] pci 0000:00:09.0: setting latency timer to 64 [ 0.955293] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.955359] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.955427] pci 0000:00:1c.0: setting latency timer to 64 [ 0.955435] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.955503] pci 0000:00:1c.1: setting latency timer to 64 [ 0.955508] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.955577] pci 0000:00:1c.4: setting latency timer to 64 [ 0.955582] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.955650] pci 0000:00:1c.5: setting latency timer to 64 [ 0.955655] pci 0000:00:1e.0: setting latency timer to 64 [ 0.955657] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.955658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.955660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.955661] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.955662] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.955664] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.955665] pci_bus 0000:02: resource 1 [mem 0xfb800000-0xfb8fffff] [ 0.955666] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.955668] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.955669] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff] [ 0.955670] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.955672] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.955673] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf01fffff] [ 0.955674] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.955676] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff] [ 0.955677] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb7fffff] [ 0.955678] pci_bus 0000:06: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.955680] pci_bus 0000:07: resource 0 [io 0xa000-0xafff] [ 0.955681] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.955682] pci_bus 0000:07: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 0.955683] pci_bus 0000:08: resource 0 [io 0xe000-0xefff] [ 0.955685] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.955686] pci_bus 0000:08: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 0.955688] pci_bus 0000:09: resource 1 [mem 0xfb900000-0xfb9fffff] [ 0.955689] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7] [ 0.955690] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff] [ 0.955691] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff] [ 0.955693] pci_bus 0000:09: resource 7 [mem 0x000c0000-0x000dffff] [ 0.955694] pci_bus 0000:09: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.955711] NET: Registered protocol family 2 [ 0.955922] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.956728] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.958128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.958417] TCP: Hash tables configured (established 524288 bind 65536) [ 0.958484] TCP reno registered [ 0.958554] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.958658] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.958813] NET: Registered protocol family 1 [ 0.959003] RPC: Registered udp transport module. [ 0.959067] RPC: Registered tcp transport module. [ 0.959130] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.959225] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.959226] pci 0000:00:1a.0: Performing full reset [ 0.959241] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.959242] pci 0000:00:1a.1: Performing full reset [ 0.959256] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.959257] pci 0000:00:1a.2: Performing full reset [ 0.959283] pci 0000:00:1a.7: EHCI: BIOS handoff [ 0.969949] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x003b [ 0.969951] pci 0000:00:1d.0: Performing full reset [ 0.969967] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.969969] pci 0000:00:1d.1: Performing full reset [ 0.969985] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.969987] pci 0000:00:1d.2: Performing full reset [ 0.970014] pci 0000:00:1d.7: EHCI: BIOS handoff [ 0.980934] pci 0000:02:00.0: Boot video device [ 0.980958] PCI: CLS 64 bytes, default 64 [ 0.981004] Trying to unpack rootfs image as initramfs... [ 1.015199] Freeing initrd memory: 2364k freed [ 1.015468] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.015535] Placing 64MB software IO TLB between ffff8800021db000 - ffff8800061db000 [ 1.015633] software IO TLB at phys 0x21db000 - 0x61db000 [ 1.017127] microcode: CPU0 sig=0x106a4, pf=0x2, revision=0xa [ 1.017196] microcode: CPU1 sig=0x106a4, pf=0x2, revision=0xa [ 1.017265] microcode: CPU2 sig=0x106a4, pf=0x2, revision=0xa [ 1.017334] microcode: CPU3 sig=0x106a4, pf=0x2, revision=0xa [ 1.017402] microcode: CPU4 sig=0x106a4, pf=0x2, revision=0xa [ 1.017471] microcode: CPU5 sig=0x106a4, pf=0x2, revision=0xa [ 1.017541] microcode: CPU6 sig=0x106a4, pf=0x2, revision=0xa [ 1.017608] microcode: CPU7 sig=0x106a4, pf=0x2, revision=0xa [ 1.017694] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.017956] audit: initializing netlink socket (disabled) [ 1.018028] type=2000 audit(1282072877.783:1): initialized [ 1.018368] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.019952] VFS: Disk quotas dquot_6.5.2 [ 1.020068] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.020531] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.020867] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.021193] Slow work thread pool: Starting up [ 1.021276] Slow work thread pool: Ready [ 1.021338] NTFS driver 2.1.29 [Flags: R/O]. [ 1.021496] fuse init (API version 7.14) [ 1.021670] msgmni has been set to 11950 [ 1.021791] SELinux: Registering netfilter hooks [ 1.022358] alg: No test for stdrng (krng) [ 1.022480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.022578] io scheduler noop registered [ 1.022639] io scheduler deadline registered [ 1.022736] io scheduler cfq registered (default) [ 1.022881] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.022910] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.022980] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.023006] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X [ 1.023072] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.023097] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X [ 1.023163] pcieport 0000:00:09.0: setting latency timer to 64 [ 1.023188] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X [ 1.023258] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.023287] pcieport 0000:00:1c.0: irq 44 for MSI/MSI-X [ 1.023391] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.023420] pcieport 0000:00:1c.1: irq 45 for MSI/MSI-X [ 1.023510] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.023539] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X [ 1.023628] pcieport 0000:00:1c.5: setting latency timer to 64 [ 1.023657] pcieport 0000:00:1c.5: irq 47 for MSI/MSI-X [ 1.023762] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 1.023766] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.023769] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 1.023772] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support [ 1.023827] pci-stub: invalid id string "" [ 1.023983] intel_idle: MWAIT substates: 0x1120 [ 1.023984] intel_idle: v0.4 model 0x1A [ 1.023985] intel_idle: lapic_timer_reliable_states 0x2 [ 1.024207] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.024306] ACPI: Power Button [PWRB] [ 1.024406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.024502] ACPI: Power Button [PWRF] [ 1.024604] ACPI: acpi_idle yielding to intel_idle [ 1.027385] ERST: Table is not found! [ 1.028935] Non-volatile memory driver v1.3 [ 1.029001] Linux agpgart interface v0.103 [ 1.029089] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.029188] Hangcheck: Using getrawmonotonic(). [ 1.029272] ramoops: invalid size specification [ 1.029329] [drm] Initialized drm 1.1.0 20060810 [ 1.029467] [drm] radeon defaulting to kernel modesetting. [ 1.029532] [drm] radeon kernel modesetting enabled. [ 1.029626] radeon 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.029695] radeon 0000:02:00.0: setting latency timer to 64 [ 1.030620] [drm] initializing kernel modesetting (RV730 0x1002:0x9490). [ 1.030775] [drm] register mmio base: 0xFB8E0000 [ 1.030838] [drm] register mmio size: 65536 [ 1.030963] ATOM BIOS: [ 1.031032] [drm] Clocks initialized ! [ 1.031100] radeon 0000:02:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used) [ 1.031197] radeon 0000:02:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF [ 1.031273] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.031371] [drm] Detected VRAM RAM=512M, BAR=256M [ 1.031434] [drm] RAM width 128bits DDR [ 1.031512] [TTM] Zone kernel: Available graphics memory: 3059444 kiB. [ 1.031578] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 1.031644] [TTM] Initializing pool allocator. [ 1.031716] [drm] radeon: 512M of VRAM memory ready [ 1.031779] [drm] radeon: 512M of GTT memory ready. [ 1.031875] radeon 0000:02:00.0: irq 48 for MSI/MSI-X [ 1.031878] [drm] radeon: using MSI. [ 1.031965] [drm] radeon: irq initialized. [ 1.032029] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.032521] [drm] Loading RV730 Microcode [ 1.081218] [drm] ring test succeeded in 1 usecs [ 1.081370] [drm] radeon: ib pool ready. [ 1.081484] [drm] ib test succeeded in 0 usecs [ 1.081547] [drm] Enabling audio support [ 1.081593] [drm] Default TV standard: PAL [ 1.081780] [drm] Default TV standard: PAL [ 1.081876] [drm] Default TV standard: PAL [ 1.081998] [drm] Radeon Display Connectors [ 1.082060] [drm] Connector 0: [ 1.082120] [drm] DVI-I [ 1.082180] [drm] HPD2 [ 1.082240] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 1.082336] [drm] Encoders: [ 1.082396] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 1.082459] [drm] DFP2: INTERNAL_UNIPHY1 [ 1.082521] [drm] Connector 1: [ 1.082581] [drm] DIN [ 1.082640] [drm] Encoders: [ 1.082699] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 1.082762] [drm] Connector 2: [ 1.082822] [drm] DVI-I [ 1.082881] [drm] HPD1 [ 1.082942] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 1.083039] [drm] Encoders: [ 1.083098] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.083161] [drm] DFP1: INTERNAL_UNIPHY [ 1.138058] [drm] Internal thermal controller with fan control [ 1.138129] [drm] radeon: power management initialized [ 1.619163] [drm] fb mappable at 0xE0141000 [ 1.619225] [drm] vram apper at 0xE0000000 [ 1.619287] [drm] size 9216000 [ 1.619347] [drm] fb depth is 24 [ 1.619408] [drm] pitch is 7680 [ 2.828594] Console: switching to colour frame buffer device 240x75 [ 2.832775] fb0: radeondrmfb frame buffer device [ 2.832776] drm: registered panic notifier [ 2.832816] [drm] Initialized radeon 2.5.0 20080528 for 0000:02:00.0 on minor 0 [ 2.832852] radeon 0000:03:00.0: enabling device (0000 -> 0003) [ 2.832878] radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.832905] radeon 0000:03:00.0: setting latency timer to 64 [ 2.833830] [drm] initializing kernel modesetting (RV730 0x1002:0x9490). [ 2.833954] [drm] register mmio base: 0xFBAE0000 [ 2.833983] [drm] register mmio size: 65536 [ 2.944967] ATOM BIOS: [ 2.944990] [drm] GPU not posted. posting now... [ 2.946321] [drm] Clocks initialized ! [ 2.946340] radeon 0000:03:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used) [ 2.946365] radeon 0000:03:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF [ 2.946393] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 2.946421] [drm] Detected VRAM RAM=512M, BAR=256M [ 2.946438] [drm] RAM width 128bits DDR [ 2.946458] [drm] radeon: 512M of VRAM memory ready [ 2.946475] [drm] radeon: 512M of GTT memory ready. [ 2.946518] radeon 0000:03:00.0: irq 49 for MSI/MSI-X [ 2.946522] [drm] radeon: using MSI. [ 2.946563] [drm] radeon: irq initialized. [ 2.946579] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.947028] [drm] Loading RV730 Microcode [ 2.995678] [drm] ring test succeeded in 1 usecs [ 2.995787] [drm] radeon: ib pool ready. [ 2.995824] [drm] ib test succeeded in 0 usecs [ 2.995841] [drm] Enabling audio support [ 2.995867] [drm] Unknown TV standard; defaulting to NTSC [ 2.995957] [drm] Unknown TV standard; defaulting to NTSC [ 2.996013] [drm] Unknown TV standard; defaulting to NTSC [ 2.996092] [drm] Radeon Display Connectors [ 2.996109] [drm] Connector 0: [ 2.996121] [drm] DVI-I [ 2.996132] [drm] HPD2 [ 2.996144] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 2.996169] [drm] Encoders: [ 2.996180] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 2.996197] [drm] DFP2: INTERNAL_UNIPHY1 [ 2.996213] [drm] Connector 1: [ 2.996226] [drm] DIN [ 2.996236] [drm] Encoders: [ 2.996248] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 2.996264] [drm] Connector 2: [ 2.996276] [drm] DVI-I [ 2.996287] [drm] HPD1 [ 2.996298] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 2.996323] [drm] Encoders: [ 2.996334] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.996351] [drm] DFP1: INTERNAL_UNIPHY [ 3.051168] [drm] Internal thermal controller with fan control [ 3.051192] [drm] radeon: power management initialized [ 3.521236] [drm] fb mappable at 0xD0141000 [ 3.522261] [drm] vram apper at 0xD0000000 [ 3.523306] [drm] size 7680000 [ 3.524364] [drm] fb depth is 24 [ 3.525435] [drm] pitch is 6400 [ 3.526555] fb1: radeondrmfb frame buffer device [ 3.527662] [drm] Initialized radeon 2.5.0 20080528 for 0000:03:00.0 on minor 1 [ 3.530269] brd: module loaded [ 3.531888] loop: module loaded [ 3.533301] Loading iSCSI transport class v2.0-870. [ 3.534787] ahci 0000:00:1f.2: version 3.0 [ 3.534800] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.536045] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X [ 3.536066] ahci: SSS flag set, parallel bus scan disabled [ 3.537342] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 3.538619] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 3.539919] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.549221] scsi0 : ahci [ 3.550642] scsi1 : ahci [ 3.552032] scsi2 : ahci [ 3.553426] scsi3 : ahci [ 3.554827] scsi4 : ahci [ 3.556212] scsi5 : ahci [ 3.557654] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 50 [ 3.559001] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 50 [ 3.560346] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 50 [ 3.561672] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 3.562986] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 3.564286] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 3.565591] ahci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.577188] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 3.578513] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 3.579817] ahci 0000:06:00.0: setting latency timer to 64 [ 3.579903] scsi6 : ahci [ 3.581272] scsi7 : ahci [ 3.582629] ata7: SATA max UDMA/133 abar m8192@0xfb7fe000 port 0xfb7fe100 irq 17 [ 3.583955] ata8: SATA max UDMA/133 abar m8192@0xfb7fe000 port 0xfb7fe180 irq 17 [ 3.585435] pata_jmicron 0000:06:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 3.586739] pata_jmicron 0000:06:00.1: setting latency timer to 64 [ 3.586779] scsi8 : pata_jmicron [ 3.588133] scsi9 : pata_jmicron [ 3.589890] ata9: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 18 [ 3.591222] ata10: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 18 [ 3.592673] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 3.594049] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 3.595397] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.596762] PPP generic driver version 2.4.2 [ 3.598147] PPP Deflate Compression module registered [ 3.599492] PPP BSD Compression module registered [ 3.601547] modprobe used greatest stack depth: 5648 bytes left [ 3.603526] PPP MPPE Compression module registered [ 3.604876] NET: Registered protocol family 24 [ 3.606270] tun: Universal TUN/TAP device driver, 1.6 [ 3.607653] tun: (C) 1999-2004 Max Krasnyansky [ 3.609067] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.610471] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.611907] r8169 0000:07:00.0: setting latency timer to 64 [ 3.611951] r8169 0000:07:00.0: irq 51 for MSI/MSI-X [ 3.612098] r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc900057ee000, 00:1f:d0:ad:fd:6b, XID 081000c0 IRQ 51 [ 3.664484] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.665925] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.667382] r8169 0000:08:00.0: setting latency timer to 64 [ 3.667426] r8169 0000:08:00.0: irq 52 for MSI/MSI-X [ 3.667571] r8169 0000:08:00.0: eth1: RTL8168d/8111d at 0xffffc90005bf8000, 00:1f:d0:ad:fd:69, XID 081000c0 IRQ 52 [ 3.720032] usbcore: registered new interface driver rt2500usb [ 3.721527] usbcore: registered new interface driver rt73usb [ 3.722996] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 3.724511] console [netcon0] enabled [ 3.726001] netconsole: network logging started [ 3.727531] firewire_ohci 0000:09:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.762484] ata9.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33 [ 3.778980] firewire_ohci: Added fw-ohci device 0000:09:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 3.780682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.782265] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 3.782283] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.783868] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.783871] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.785458] drivers/usb/core/inode.c: creating file 'devices' [ 3.785461] drivers/usb/core/inode.c: creating file '001' [ 3.785490] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.786456] ata9.00: configured for UDMA/33 [ 3.788689] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 3.788692] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 3.788708] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.790302] ehci_hcd 0000:00:1a.7: reset command 080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT [ 3.794170] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 3.794171] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 3.794175] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 3.795769] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 3.799655] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 3.804896] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.806519] usb usb1: default language 0x0409 [ 3.806524] usb usb1: udev 1, busnum 1, minor = 0 [ 3.806525] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.808121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.809719] usb usb1: Product: EHCI Host Controller [ 3.811316] usb usb1: Manufacturer: Linux 2.6.35.2 ehci_hcd [ 3.812913] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.814538] usb usb1: usb_probe_device [ 3.814540] usb usb1: configuration #1 chosen from 1 choice [ 3.814545] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 3.814574] hub 1-0:1.0: usb_probe_interface [ 3.814575] hub 1-0:1.0: usb_probe_interface - got id [ 3.814576] hub 1-0:1.0: USB hub found [ 3.816149] hub 1-0:1.0: 6 ports detected [ 3.817724] hub 1-0:1.0: standalone hub [ 3.817725] hub 1-0:1.0: no power switching (usb 1.0) [ 3.817727] hub 1-0:1.0: individual port over-current protection [ 3.817729] hub 1-0:1.0: power on to power good time: 20ms [ 3.817732] hub 1-0:1.0: local power source is good [ 3.817733] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 3.817756] drivers/usb/core/inode.c: creating file '001' [ 3.817786] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.819399] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.819401] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.820991] drivers/usb/core/inode.c: creating file '002' [ 3.821024] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.822626] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 3.822629] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 3.822645] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.824229] ehci_hcd 0000:00:1d.7: reset command 080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT [ 3.828097] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 3.828098] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 3.828108] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 3.829685] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 3.833552] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 3.838857] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.840434] usb usb2: default language 0x0409 [ 3.840438] usb usb2: udev 1, busnum 2, minor = 128 [ 3.840439] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.842002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.843574] usb usb2: Product: EHCI Host Controller [ 3.845151] usb usb2: Manufacturer: Linux 2.6.35.2 ehci_hcd [ 3.846735] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.848365] usb usb2: usb_probe_device [ 3.848367] usb usb2: configuration #1 chosen from 1 choice [ 3.848371] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 3.848394] hub 2-0:1.0: usb_probe_interface [ 3.848396] hub 2-0:1.0: usb_probe_interface - got id [ 3.848397] hub 2-0:1.0: USB hub found [ 3.849971] hub 2-0:1.0: 6 ports detected [ 3.851530] hub 2-0:1.0: standalone hub [ 3.851531] hub 2-0:1.0: no power switching (usb 1.0) [ 3.851532] hub 2-0:1.0: individual port over-current protection [ 3.851533] hub 2-0:1.0: power on to power good time: 20ms [ 3.851535] hub 2-0:1.0: local power source is good [ 3.851536] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 3.851556] drivers/usb/core/inode.c: creating file '001' [ 3.851596] uhci_hcd: USB Universal Host Controller Interface driver [ 3.853229] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.854829] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.854831] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.856434] drivers/usb/core/inode.c: creating file '003' [ 3.856465] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.858092] uhci_hcd 0000:00:1a.0: detected 2 ports [ 3.859710] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.859711] uhci_hcd 0000:00:1a.0: Performing full reset [ 3.859723] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 3.859733] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 3.861358] usb usb3: default language 0x0409 [ 3.861362] usb usb3: udev 1, busnum 3, minor = 256 [ 3.861363] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.862966] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.864553] usb usb3: Product: UHCI Host Controller [ 3.866147] usb usb3: Manufacturer: Linux 2.6.35.2 uhci_hcd [ 3.867720] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.869334] usb usb3: usb_probe_device [ 3.869336] usb usb3: configuration #1 chosen from 1 choice [ 3.869339] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 3.869365] hub 3-0:1.0: usb_probe_interface [ 3.869366] hub 3-0:1.0: usb_probe_interface - got id [ 3.869367] hub 3-0:1.0: USB hub found [ 3.870946] hub 3-0:1.0: 2 ports detected [ 3.872490] hub 3-0:1.0: standalone hub [ 3.872491] hub 3-0:1.0: no power switching (usb 1.0) [ 3.872492] hub 3-0:1.0: individual port over-current protection [ 3.872493] hub 3-0:1.0: power on to power good time: 2ms [ 3.872495] hub 3-0:1.0: local power source is good [ 3.872496] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 3.872504] drivers/usb/core/inode.c: creating file '001' [ 3.872526] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 3.872540] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.874130] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.874132] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.875696] drivers/usb/core/inode.c: creating file '004' [ 3.875730] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.877307] uhci_hcd 0000:00:1a.1: detected 2 ports [ 3.878872] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.878873] uhci_hcd 0000:00:1a.1: Performing full reset [ 3.878885] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 3.878894] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 3.880472] usb usb4: default language 0x0409 [ 3.880476] usb usb4: udev 1, busnum 4, minor = 384 [ 3.880477] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.882043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.883603] usb usb4: Product: UHCI Host Controller [ 3.885158] usb usb4: Manufacturer: Linux 2.6.35.2 uhci_hcd [ 3.886718] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.888307] usb usb4: usb_probe_device [ 3.888309] usb usb4: configuration #1 chosen from 1 choice [ 3.888312] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 3.888339] hub 4-0:1.0: usb_probe_interface [ 3.888341] hub 4-0:1.0: usb_probe_interface - got id [ 3.888342] hub 4-0:1.0: USB hub found [ 3.889821] ata8: SATA link down (SStatus 0 SControl 300) [ 3.889824] ata7: SATA link down (SStatus 0 SControl 300) [ 3.892984] hub 4-0:1.0: 2 ports detected [ 3.894526] hub 4-0:1.0: standalone hub [ 3.894526] hub 4-0:1.0: no power switching (usb 1.0) [ 3.894527] hub 4-0:1.0: individual port over-current protection [ 3.894529] hub 4-0:1.0: power on to power good time: 2ms [ 3.894531] hub 4-0:1.0: local power source is good [ 3.894532] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 3.894539] drivers/usb/core/inode.c: creating file '001' [ 3.894558] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 3.894571] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.896135] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 3.896137] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.897689] drivers/usb/core/inode.c: creating file '005' [ 3.897719] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 3.899272] uhci_hcd 0000:00:1a.2: detected 2 ports [ 3.900800] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.900801] uhci_hcd 0000:00:1a.2: Performing full reset [ 3.900813] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 3.900816] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 3.902346] usb usb5: default language 0x0409 [ 3.902349] usb usb5: udev 1, busnum 5, minor = 512 [ 3.902351] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.903856] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.905340] usb usb5: Product: UHCI Host Controller [ 3.906829] usb usb5: Manufacturer: Linux 2.6.35.2 uhci_hcd [ 3.908311] usb usb5: SerialNumber: 0000:00:1a.2 [ 3.909824] usb usb5: usb_probe_device [ 3.909825] usb usb5: configuration #1 chosen from 1 choice [ 3.909829] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 3.909853] hub 5-0:1.0: usb_probe_interface [ 3.909854] hub 5-0:1.0: usb_probe_interface - got id [ 3.909855] hub 5-0:1.0: USB hub found [ 3.911335] hub 5-0:1.0: 2 ports detected [ 3.912782] hub 5-0:1.0: standalone hub [ 3.912783] hub 5-0:1.0: no power switching (usb 1.0) [ 3.912784] hub 5-0:1.0: individual port over-current protection [ 3.912785] hub 5-0:1.0: power on to power good time: 2ms [ 3.912787] hub 5-0:1.0: local power source is good [ 3.912788] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 3.912799] drivers/usb/core/inode.c: creating file '001' [ 3.912817] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 3.912830] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.914300] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.914302] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.915744] drivers/usb/core/inode.c: creating file '006' [ 3.915774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 3.917208] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 3.917210] hub 1-0:1.0: port 1: status 0501 change 0001 [ 3.917216] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT [ 3.917218] hub 1-0:1.0: port 2: status 0501 change 0001 [ 3.917226] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT [ 3.917227] hub 1-0:1.0: port 5: status 0501 change 0001 [ 3.917237] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.918661] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.918662] uhci_hcd 0000:00:1d.0: Performing full reset [ 3.918674] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 3.918677] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 3.920107] usb usb6: default language 0x0409 [ 3.920111] usb usb6: udev 1, busnum 6, minor = 640 [ 3.920112] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.921524] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.922919] usb usb6: Product: UHCI Host Controller [ 3.924309] usb usb6: Manufacturer: Linux 2.6.35.2 uhci_hcd [ 3.925699] usb usb6: SerialNumber: 0000:00:1d.0 [ 3.927124] usb usb6: usb_probe_device [ 3.927125] usb usb6: configuration #1 chosen from 1 choice [ 3.927129] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 3.927153] hub 6-0:1.0: usb_probe_interface [ 3.927154] hub 6-0:1.0: usb_probe_interface - got id [ 3.927155] hub 6-0:1.0: USB hub found [ 3.928539] hub 6-0:1.0: 2 ports detected [ 3.929912] hub 6-0:1.0: standalone hub [ 3.929913] hub 6-0:1.0: no power switching (usb 1.0) [ 3.929914] hub 6-0:1.0: individual port over-current protection [ 3.929915] hub 6-0:1.0: power on to power good time: 2ms [ 3.929917] hub 6-0:1.0: local power source is good [ 3.929918] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 3.929926] drivers/usb/core/inode.c: creating file '001' [ 3.929950] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 3.929961] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.931361] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.931363] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.932764] drivers/usb/core/inode.c: creating file '007' [ 3.932793] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 3.934229] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.935636] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.935637] uhci_hcd 0000:00:1d.1: Performing full reset [ 3.935649] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 3.935658] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 3.937085] usb usb7: default language 0x0409 [ 3.937089] usb usb7: udev 1, busnum 7, minor = 768 [ 3.937090] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.938488] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.939879] usb usb7: Product: UHCI Host Controller [ 3.941265] usb usb7: Manufacturer: Linux 2.6.35.2 uhci_hcd [ 3.942637] usb usb7: SerialNumber: 0000:00:1d.1 [ 3.944053] usb usb7: usb_probe_device [ 3.944055] usb usb7: configuration #1 chosen from 1 choice [ 3.944058] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 3.944082] hub 7-0:1.0: usb_probe_interface [ 3.944083] hub 7-0:1.0: usb_probe_interface - got id [ 3.944084] hub 7-0:1.0: USB hub found [ 3.945459] hub 7-0:1.0: 2 ports detected [ 3.946824] hub 7-0:1.0: standalone hub [ 3.946825] hub 7-0:1.0: no power switching (usb 1.0) [ 3.946826] hub 7-0:1.0: individual port over-current protection [ 3.946827] hub 7-0:1.0: power on to power good time: 2ms [ 3.946829] hub 7-0:1.0: local power source is good [ 3.946830] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 3.946838] drivers/usb/core/inode.c: creating file '001' [ 3.946860] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 3.946871] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.948267] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.948269] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.949659] drivers/usb/core/inode.c: creating file '008' [ 3.949692] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 3.951107] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT [ 3.951109] hub 2-0:1.0: port 3: status 0501 change 0001 [ 3.951114] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 3.951116] hub 2-0:1.0: port 4: status 0501 change 0001 [ 3.951123] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 3.951125] hub 2-0:1.0: port 6: status 0501 change 0001 [ 3.951133] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.952535] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.952536] uhci_hcd 0000:00:1d.2: Performing full reset [ 3.952549] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 3.952552] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 3.953971] usb usb8: default language 0x0409 [ 3.953975] usb usb8: udev 1, busnum 8, minor = 896 [ 3.953976] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.955385] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.956786] usb usb8: Product: UHCI Host Controller [ 3.958185] usb usb8: Manufacturer: Linux 2.6.35.2 uhci_hcd [ 3.959580] usb usb8: SerialNumber: 0000:00:1d.2 [ 3.961006] usb usb8: usb_probe_device [ 3.961007] usb usb8: configuration #1 chosen from 1 choice [ 3.961011] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 3.961036] hub 8-0:1.0: usb_probe_interface [ 3.961038] hub 8-0:1.0: usb_probe_interface - got id [ 3.961039] hub 8-0:1.0: USB hub found [ 3.962422] hub 8-0:1.0: 2 ports detected [ 3.963800] hub 8-0:1.0: standalone hub [ 3.963801] hub 8-0:1.0: no power switching (usb 1.0) [ 3.963802] hub 8-0:1.0: individual port over-current protection [ 3.963803] hub 8-0:1.0: power on to power good time: 2ms [ 3.963805] hub 8-0:1.0: local power source is good [ 3.963806] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 3.963814] drivers/usb/core/inode.c: creating file '001' [ 3.963835] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 3.963883] usbcore: registered new interface driver usblp [ 3.965281] Initializing USB Mass Storage driver... [ 3.966714] usbcore: registered new interface driver usb-storage [ 3.968115] USB Mass Storage support registered. [ 3.969555] usbcore: registered new interface driver libusual [ 3.970987] usbcore: registered new interface driver ums-alauda [ 3.972395] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 3.972402] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00 [ 3.972427] usbcore: registered new interface driver ums-cypress [ 3.973843] usbcore: registered new interface driver ums-datafab [ 3.975227] usbcore: registered new interface driver ums-freecom [ 3.976605] usbcore: registered new interface driver ums-isd200 [ 3.977964] usbcore: registered new interface driver ums-jumpshot [ 3.979305] usbcore: registered new interface driver ums-karma [ 3.980643] usbcore: registered new interface driver ums-onetouch [ 3.981967] usbcore: registered new interface driver ums-sddr09 [ 3.983281] usbcore: registered new interface driver ums-sddr55 [ 3.984587] usbcore: registered new interface driver ums-usbat [ 3.985947] PNP: No PS/2 controller found. Probing ports directly. [ 3.987581] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.988872] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.990194] mice: PS/2 mouse device common for all mice [ 3.991614] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 3.992980] rtc_cmos 00:04: RTC can wake from S4 [ 3.994263] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.994295] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 3.995595] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.996882] i2c /dev entries driver [ 3.998287] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.999704] coretemp coretemp.0: TjMax is 100 C. [ 4.001068] coretemp coretemp.1: TjMax is 100 C. [ 4.002421] coretemp coretemp.2: TjMax is 100 C. [ 4.003758] coretemp coretemp.3: TjMax is 100 C. [ 4.005096] it87: Found IT8720F chip at 0x290, revision 5 [ 4.006392] it87: VID is disabled (pins used for GPIO) [ 4.007694] it87: Routing internal VCCH to in7 [ 4.009003] it87: in3 is VCC (+5V) [ 4.010294] it87: in7 is VCCH (+5V Stand-By) [ 4.011586] it87: Beeping is supported [ 4.012870] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00 [ 4.013078] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 4.014423] iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it [ 4.015741] iTCO_vendor_support: vendor-support=0 [ 4.017055] md: raid0 personality registered for level 0 [ 4.018371] md: raid1 personality registered for level 1 [ 4.019674] md: raid10 personality registered for level 10 [ 4.020986] md: raid6 personality registered for level 6 [ 4.022292] md: raid5 personality registered for level 5 [ 4.022647] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.023427] ata1.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133 [ 4.023429] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.024301] ata1.00: configured for UDMA/133 [ 4.028770] md: raid4 personality registered for level 4 [ 4.030066] hub 1-0:1.0: state 7 ports 6 chg 0026 evt 0000 [ 4.030071] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 4.030165] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 4.031571] Bluetooth: HCI UART driver ver 2.2 [ 4.032883] Bluetooth: HCI H4 protocol initialized [ 4.034191] Bluetooth: HCI BCSP protocol initialized [ 4.035496] Bluetooth: HCILL protocol initialized [ 4.035816] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 4.035937] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.035960] sd 0:0:0:0: [sda] Write Protect is off [ 4.035961] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.035968] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.035971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.043472] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 4.044854] usbcore: registered new interface driver btusb [ 4.045618] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 [ 4.045627] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 [ 4.046234] sda: [ 4.046827] cpuidle: using governor ladder [ 4.050594] cpuidle: using governor menu [ 4.051939] No iBFT detected. [ 4.053917] usbcore: registered new interface driver hiddev [ 4.055292] usbcore: registered new interface driver usbhid [ 4.056626] usbhid: USB HID core driver [ 4.058764] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.060217] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 4.060236] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 4.060250] sda1 sda2 sda3 [ 4.061965] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.062644] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00 [ 4.071443] hda_codec: ALC889A: BIOS auto-probing. [ 4.078840] HDA Intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.080261] HDA Intel 0000:02:00.1: irq 54 for MSI/MSI-X [ 4.080277] HDA Intel 0000:02:00.1: setting latency timer to 64 [ 4.080861] ehci_hcd 0000:00:1a.7: port 1 high speed [ 4.080864] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 4.131555] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 4.183868] ehci_hcd 0000:00:1a.7: port 1 high speed [ 4.183871] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 4.246952] usb 1-1: default language 0x0409 [ 4.247230] usb 1-1: udev 2, busnum 1, minor = 1 [ 4.247232] usb 1-1: New USB device found, idVendor=0409, idProduct=0058 [ 4.248643] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.250057] usb 1-1: Product: USB2.0 Hub Controller [ 4.251476] usb 1-1: Manufacturer: NEC Corporation [ 4.253094] usb 1-1: usb_probe_device [ 4.253097] usb 1-1: configuration #1 chosen from 1 choice [ 4.253175] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 4.253254] hub 1-1:1.0: usb_probe_interface [ 4.253255] hub 1-1:1.0: usb_probe_interface - got id [ 4.253256] hub 1-1:1.0: USB hub found [ 4.254796] hub 1-1:1.0: 4 ports detected [ 4.256230] hub 1-1:1.0: standalone hub [ 4.256231] hub 1-1:1.0: individual port power switching [ 4.256232] hub 1-1:1.0: individual port over-current protection [ 4.256233] hub 1-1:1.0: Single TT [ 4.256234] hub 1-1:1.0: TT requires at most 16 FS bit times (1332 ns) [ 4.256235] hub 1-1:1.0: Port indicators are supported [ 4.256236] hub 1-1:1.0: power on to power good time: 100ms [ 4.256417] hub 1-1:1.0: local power source is good [ 4.256418] hub 1-1:1.0: enabling power on all ports [ 4.256923] drivers/usb/core/inode.c: creating file '002' [ 4.256940] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 4.256944] ehci_hcd 0000:00:1a.7: port 2 low speed --> companion [ 4.279502] firewire_core: created device fw0: GUID 00ab6fe600001fd0, S400 [ 4.307404] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 4.307420] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 4.307424] ehci_hcd 0000:00:1a.7: port 5 low speed --> companion [ 4.356987] usb 1-1: link qh256-0001/ffff8801a88b1380 start 1 [1/0 us] [ 4.358359] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC [ 4.358373] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.358377] hub 2-0:1.0: state 7 ports 6 chg 0058 evt 0000 [ 4.358381] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 4.358385] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion [ 4.409317] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 4.409335] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 4.460487] ehci_hcd 0000:00:1d.7: port 4 high speed [ 4.460491] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 4.511201] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 4.563369] ehci_hcd 0000:00:1d.7: port 4 high speed [ 4.563372] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 4.626430] usb 2-4: udev 3, busnum 2, minor = 130 [ 4.626432] usb 2-4: New USB device found, idVendor=0424, idProduct=2514 [ 4.628391] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.630589] usb 2-4: usb_probe_device [ 4.630591] usb 2-4: configuration #1 chosen from 1 choice [ 4.630676] usb 2-4: adding 2-4:1.0 (config #1, interface 0) [ 4.630820] hub 2-4:1.0: usb_probe_interface [ 4.630822] hub 2-4:1.0: usb_probe_interface - got id [ 4.630823] hub 2-4:1.0: USB hub found [ 4.632923] hub 2-4:1.0: 4 ports detected [ 4.634474] hub 2-4:1.0: standalone hub [ 4.634475] hub 2-4:1.0: individual port power switching [ 4.634476] hub 2-4:1.0: individual port over-current protection [ 4.634580] hub 2-4:1.0: TT per port [ 4.634581] hub 2-4:1.0: TT requires at most 8 FS bit times (666 ns) [ 4.634582] hub 2-4:1.0: power on to power good time: 100ms [ 4.634859] hub 2-4:1.0: local power source is good [ 4.634861] hub 2-4:1.0: enabling power on all ports [ 4.635294] drivers/usb/core/inode.c: creating file '003' [ 4.635340] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 4.635344] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion [ 4.685985] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 4.686000] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 4.686005] uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00 [ 4.686009] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 4.735133] hub 2-4:1.0: port 1: status 0101 change 0001 [ 4.789880] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 4.834801] usb 2-4: link qh256-0001/ffff8801a7bcf780 start 1 [1/0 us] [ 4.891751] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 4.911677] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.915129] ata2.00: ATA-8: ST31000333AS, SD1B, max UDMA/133 [ 4.916683] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.920009] ata2.00: configured for UDMA/133 [ 4.931786] scsi 1:0:0:0: Direct-Access ATA ST31000333AS SD1B PQ: 0 ANSI: 5 [ 4.933403] usb usb4: suspend_rh (auto-stop) [ 4.933421] usb usb6: suspend_rh (auto-stop) [ 4.934060] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.934145] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.937246] sd 1:0:0:0: [sdb] Write Protect is off [ 4.938789] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.938803] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.038058] usb 3-2: skipped 1 descriptor after interface [ 5.038060] usb 3-2: skipped 1 descriptor after interface [ 5.043052] usb 3-2: default language 0x0409 [ 5.058030] usb 3-2: udev 2, busnum 3, minor = 257 [ 5.058031] usb 3-2: New USB device found, idVendor=046d, idProduct=c505 [ 5.059608] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.061191] usb 3-2: Product: USB Receiver [ 5.062773] usb 3-2: Manufacturer: Logitech [ 5.064531] usb 3-2: usb_probe_device [ 5.064534] usb 3-2: configuration #1 chosen from 1 choice [ 5.067049] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 5.067188] usbhid 3-2:1.0: usb_probe_interface [ 5.067190] usbhid 3-2:1.0: usb_probe_interface - got id [ 5.081258] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3 [ 5.082880] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 5.083066] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0 [ 5.083486] sdb: [ 5.084731] usb 3-2: adding 3-2:1.1 (config #1, interface 1) [ 5.084793] HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.087996] HDA Intel 0000:03:00.1: irq 55 for MSI/MSI-X [ 5.088012] HDA Intel 0000:03:00.1: setting latency timer to 64 [ 5.088101] usbhid 3-2:1.1: usb_probe_interface [ 5.088104] usbhid 3-2:1.1: usb_probe_interface - got id [ 5.118181] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input4 [ 5.120485] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us [ 5.120628] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1 [ 5.122974] drivers/usb/core/inode.c: creating file '002' [ 5.122990] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 5.122996] uhci_hcd 0000:00:1a.2: port 1 portsc 01a3,00 [ 5.123001] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 5.226293] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 5.328175] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 5.471557] usb 5-1: skipped 1 descriptor after interface [ 5.476550] usb 5-1: default language 0x0409 [ 5.492532] usb 5-1: udev 2, busnum 5, minor = 513 [ 5.492534] usb 5-1: New USB device found, idVendor=046d, idProduct=c046 [ 5.494861] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.496897] usb 5-1: Product: USB Optical Mouse [ 5.498579] usb 5-1: Manufacturer: Logitech [ 5.500341] usb 5-1: usb_probe_device [ 5.500342] usb 5-1: configuration #1 chosen from 1 choice [ 5.502525] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 5.502607] usbhid 5-1:1.0: usb_probe_interface [ 5.502608] usbhid 5-1:1.0: usb_probe_interface - got id [ 5.502996] sdb1 sdb2 sdb3 [ 5.516685] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5 [ 5.518767] generic-usb 0003:046D:C046.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.2-1/input0 [ 5.520525] drivers/usb/core/inode.c: creating file '002' [ 5.520536] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 5.520541] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 [ 5.520545] hub 7-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 5.623911] hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 5.725789] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 5.808624] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.812453] ata3.00: ATA-8: ST3320613AS, SD2B, max UDMA/133 [ 5.814209] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.817623] ata3.00: configured for UDMA/133 [ 5.829731] scsi 2:0:0:0: Direct-Access ATA ST3320613AS SD2B PQ: 0 ANSI: 5 [ 5.831929] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 5.832005] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.835513] sd 2:0:0:0: [sdc] Write Protect is off [ 5.837279] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.837293] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.934824] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.959778] usb 7-1: skipped 1 descriptor after interface [ 5.959780] usb 7-1: skipped 1 descriptor after interface [ 5.973758] usb 7-1: default language 0x0409 [ 6.043679] usb 7-1: udev 2, busnum 7, minor = 769 [ 6.043680] usb 7-1: New USB device found, idVendor=046d, idProduct=c30e [ 6.045467] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.047253] usb 7-1: Product: HID compliant keyboard [ 6.049017] usb 7-1: Manufacturer: Logitech [ 6.050948] usb 7-1: usb_probe_device [ 6.050951] usb 7-1: configuration #1 chosen from 1 choice [ 6.061357] sdc: [ 6.062751] usb 7-1: adding 7-1:1.0 (config #1, interface 0) [ 6.064676] usbhid 7-1:1.0: usb_probe_interface [ 6.064678] usbhid 7-1:1.0: usb_probe_interface - got id [ 6.091335] sdc1 [ 6.093292] sd 2:0:0:0: [sdc] Attached SCSI disk [ 6.093673] usbcore: registered new interface driver snd-usb-audio [ 6.093675] ALSA device list: [ 6.093676] #0: HDA Intel at 0xfbff4000 irq 53 [ 6.093677] #1: HDA ATI HDMI at 0xfb8fc000 irq 54 [ 6.093678] #2: HDA ATI HDMI at 0xfbafc000 irq 55 [ 6.093705] Mirror/redirect action on [ 6.093706] u32 classifier [ 6.093707] Performance counters on [ 6.093707] Actions configured [ 6.093709] Netfilter messages via NETLINK v0.30. [ 6.093724] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 6.093944] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 6.093945] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 6.093946] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 6.093965] ctnetlink v0.93: registering with nfnetlink. [ 6.094105] IPv4 over IPv4 tunneling driver [ 6.094318] GRE over IPv4 tunneling driver [ 6.094677] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.094707] arp_tables: (C) 2002 David S. Miller [ 6.094716] TCP cubic registered [ 6.094717] Initializing XFRM netlink socket [ 6.094887] NET: Registered protocol family 10 [ 6.095771] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.095808] IPv6 over IPv4 tunneling driver [ 6.096193] NET: Registered protocol family 17 [ 6.096220] Bridge firewalling registered [ 6.096249] Bluetooth: L2CAP ver 2.14 [ 6.096249] Bluetooth: L2CAP socket layer initialized [ 6.096251] Bluetooth: SCO (Voice Link) ver 0.6 [ 6.096252] Bluetooth: SCO socket layer initialized [ 6.096268] Bluetooth: RFCOMM socket layer initialized [ 6.096269] Bluetooth: RFCOMM ver 1.11 [ 6.096270] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.096270] Bluetooth: BNEP filters: protocol multicast [ 6.096273] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.125892] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input6 [ 6.125898] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 6.126140] generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.1-1/input0 [ 6.126149] usb 7-1: adding 7-1:1.1 (config #1, interface 1) [ 6.126273] usbhid 7-1:1.1: usb_probe_interface [ 6.126274] usbhid 7-1:1.1: usb_probe_interface - got id [ 6.157664] PM: Resume from disk failed. [ 6.157668] registered taskstats version 1 [ 6.159760] Magic number: 6:129:395 [ 6.161361] pcieport 0000:00:07.0: hash matches [ 6.163016] rtc_cmos 00:04: setting system clock to 2010-08-17 19:21:24 UTC (1282072884) [ 6.252766] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input7 [ 6.254359] uhci_hcd 0000:00:1d.1: reserve dev 2 ep82-INT, period 8, phase 4, 118 us [ 6.254801] generic-usb 0003:046D:C30E.0005: input,hidraw4: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.1-1/input1 [ 6.256413] drivers/usb/core/inode.c: creating file '002' [ 6.256422] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 6.256428] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00 [ 6.256432] hub 8-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 6.359071] hub 8-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 6.460951] usb 8-2: new low speed USB device using uhci_hcd and address 2 [ 6.604006] usb 8-2: skipped 1 descriptor after interface [ 6.608999] usb 8-2: default language 0x0409 [ 6.641963] usb 8-2: udev 2, busnum 8, minor = 897 [ 6.641966] usb 8-2: New USB device found, idVendor=051d, idProduct=0002 [ 6.643527] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 6.645065] usb 8-2: Product: Smart-UPS 1500 FW:653.13.I USB FW:7.3 [ 6.646582] usb 8-2: Manufacturer: American Power Conversion [ 6.648105] usb 8-2: SerialNumber: AS0748221462 [ 6.649795] usb 8-2: usb_probe_device [ 6.649799] usb 8-2: configuration #1 chosen from 1 choice [ 6.684914] usb 8-2: adding 8-2:1.0 (config #1, interface 0) [ 6.685076] usbhid 8-2:1.0: usb_probe_interface [ 6.685079] usbhid 8-2:1.0: usb_probe_interface - got id [ 6.707644] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.754179] ata4.00: HPA detected: current 625140335, native 625142448 [ 6.755732] ata4.00: ATA-7: ST3320620NS, 3.AEG, max UDMA/133 [ 6.757212] ata4.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.812439] ata4.00: configured for UDMA/133 [ 6.824630] scsi 3:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5 [ 6.827426] sd 3:0:0:0: [sdd] 625140335 512-byte logical blocks: (320 GB/298 GiB) [ 6.827539] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 6.830540] sd 3:0:0:0: [sdd] Write Protect is off [ 6.832396] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 6.832408] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.834537] sdd: sdd1 [ 6.854007] sd 3:0:0:0: [sdd] Attached SCSI disk [ 7.702529] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.746764] ata5.00: ATA-7: ST3320620NS, 3.AEG, max UDMA/133 [ 7.748303] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.805018] ata5.00: configured for UDMA/133 [ 7.817475] scsi 4:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5 [ 7.820081] sd 4:0:0:0: [sde] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 7.820183] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 7.823290] sd 4:0:0:0: [sde] Write Protect is off [ 7.824849] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 7.824862] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.826490] sde: sde1 [ 7.846627] sd 4:0:0:0: [sde] Attached SCSI disk [ 8.534825] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 8.535150] generic-usb 0003:051D:0002.0006: hiddev96,hidraw5: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 FW:653.13.I USB FW:7.3] on usb-0000:00:1d.2-2/input0 [ 8.536877] drivers/usb/core/inode.c: creating file '002' [ 8.536888] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020 [ 8.536903] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 8.536905] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 8.536908] hub 2-4:1.0: state 7 ports 4 chg 0002 evt 0000 [ 8.537092] hub 2-4:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 8.547626] hub 2-4:1.0: port 1 not reset yet, waiting 10ms [ 8.609685] usb 2-4.1: new full speed USB device using ehci_hcd and address 5 [ 8.623662] hub 2-4:1.0: port 1 not reset yet, waiting 10ms [ 8.695377] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.698203] usb 2-4.1: skipped 10 descriptors after interface [ 8.698207] usb 2-4.1: skipped 2 descriptors after interface [ 8.698209] usb 2-4.1: skipped 1 descriptor after endpoint [ 8.698212] usb 2-4.1: skipped 2 descriptors after interface [ 8.698214] usb 2-4.1: skipped 1 descriptor after endpoint [ 8.698216] usb 2-4.1: skipped 1 descriptor after interface [ 8.698324] usb 2-4.1: default language 0x0409 [ 8.698577] usb 2-4.1: udev 5, busnum 2, minor = 132 [ 8.698580] usb 2-4.1: New USB device found, idVendor=0d8c, idProduct=000c [ 8.701005] usb 2-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.703389] usb 2-4.1: Product: C-Media USB Headphone Set [ 8.706120] usb 2-4.1: usb_probe_device [ 8.706124] usb 2-4.1: configuration #1 chosen from 1 choice [ 8.706319] usb 2-4.1: adding 2-4.1:1.0 (config #1, interface 0) [ 8.706534] snd-usb-audio 2-4.1:1.0: usb_probe_interface [ 8.706541] snd-usb-audio 2-4.1:1.0: usb_probe_interface - got id [ 8.720659] usb 2-4.1: adding 2-4.1:1.1 (config #1, interface 1) [ 8.720715] usb 2-4.1: adding 2-4.1:1.2 (config #1, interface 2) [ 8.720809] usb 2-4.1: adding 2-4.1:1.3 (config #1, interface 3) [ 8.720915] usbhid 2-4.1:1.3: usb_probe_interface [ 8.720918] usbhid 2-4.1:1.3: usb_probe_interface - got id [ 8.721649] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.3/input/input8 [ 8.724149] usb 2-4.1: link qh32-0601/ffff8801a7bcfb00 start 2 [1/2 us] [ 8.724307] generic-usb 0003:0D8C:000C.0007: input,hidraw6: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.7-4.1/input3 [ 8.726106] drivers/usb/core/inode.c: creating file '005' [ 8.726116] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 8.741535] ata6.00: ATA-7: ST3320620NS, 3.AEG, max UDMA/133 [ 8.743348] ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.799787] ata6.00: configured for UDMA/133 [ 8.812289] scsi 5:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5 [ 8.814829] sd 5:0:0:0: [sdf] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 8.814886] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 8.818670] sd 5:0:0:0: [sdf] Write Protect is off [ 8.818742] scsi 8:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5 [ 8.822275] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 8.822302] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.825031] sdf:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.835550] Uniform CD-ROM driver Revision: 3.20 [ 8.837525] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 8.837652] sr 8:0:0:0: Attached scsi generic sg6 type 5 [ 8.839540] sdf1 [ 8.841847] sd 5:0:0:0: [sdf] Attached SCSI disk [ 9.001644] Freeing unused kernel memory: 604k freed [ 9.003586] Write protecting the kernel read-only data: 12288k [ 9.005710] Freeing unused kernel memory: 44k freed [ 9.007742] Freeing unused kernel memory: 868k freed [ 9.031409] all_generic_ide used greatest stack depth: 5600 bytes left [ 9.097594] scsi_id used greatest stack depth: 5272 bytes left [ 9.392526] md: md3 stopped. [ 9.395376] md: bind [ 9.397684] md: bind [ 9.400683] md/raid1:md3: active with 2 out of 2 mirrors [ 9.402714] md3: detected capacity change from 0 to 53694496768 [ 9.405385] md3: unknown partition table [ 9.478005] md: md4 stopped. [ 9.480762] md: bind [ 9.482859] md: bind [ 9.485866] md/raid1:md4: active with 2 out of 2 mirrors [ 9.487904] md4: detected capacity change from 0 to 10742136832 [ 9.490589] md4: unknown partition table [ 9.664891] md: md5 stopped. [ 9.667734] md: bind [ 9.669870] md: bind [ 9.672762] md/raid1:md5: active with 2 out of 2 mirrors [ 9.674735] md5: detected capacity change from 0 to 935765344256 [ 9.677321] md5: unknown partition table [ 9.838103] async/8 used greatest stack depth: 5104 bytes left [ 9.842716] PM: Starting manual resume from disk [ 9.845265] PM: Resume from partition 9:4 [ 9.845266] PM: Checking hibernation image. [ 9.848685] PM: Error -22 checking image file [ 9.848687] PM: Resume from disk failed. [ 9.865845] EXT3-fs: barriers not enabled [ 9.878559] kjournald starting. Commit interval 5 seconds [ 9.878596] EXT3-fs (md3): mounted filesystem with ordered data mode [ 10.263125] date used greatest stack depth: 4168 bytes left [ 11.584279] udev: starting version 160 [ 12.814660] check-ptp-camer used greatest stack depth: 3424 bytes left [ 14.384472] Adding 10490364k swap on /dev/md4. Priority:-1 extents:1 across:10490364k [ 14.569314] EXT3-fs (md3): using internal journal [ 15.031737] md: md0 stopped. [ 15.057499] md: bind [ 15.062522] md: bind [ 15.067462] md: bind [ 15.072340] md: bind [ 15.077772] md/raid:md0: device sdc1 operational as raid disk 0 [ 15.082377] md/raid:md0: device sdf1 operational as raid disk 3 [ 15.086859] md/raid:md0: device sde1 operational as raid disk 2 [ 15.091284] md/raid:md0: device sdd1 operational as raid disk 1 [ 15.095895] md/raid:md0: allocated 4272kB [ 15.100268] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 15.104489] RAID conf printout: [ 15.104490] --- level:5 rd:4 wd:4 [ 15.104492] disk 0, o:1, dev:sdc1 [ 15.104493] disk 1, o:1, dev:sdd1 [ 15.104494] disk 2, o:1, dev:sde1 [ 15.104495] disk 3, o:1, dev:sdf1 [ 15.104512] md0: detected capacity change from 0 to 960210665472 [ 15.109718] md0: unknown partition table [ 15.960002] EXT3-fs: barriers not enabled [ 15.975414] kjournald starting. Commit interval 5 seconds [ 16.016832] EXT3-fs (md5): using internal journal [ 16.020232] EXT3-fs (md5): mounted filesystem with ordered data mode [ 16.119095] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 17.942683] r8169 0000:07:00.0: eth0: link up [ 17.946315] r8169 0000:07:00.0: eth0: link up [ 23.854246] svc: failed to register lockdv1 RPC service (errno 97). [ 23.856783] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 23.863118] NFSD: starting 90-second grace period [ 26.593278] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 64, phase 0, 106 us [ 27.200281] r8169 0000:08:00.0: eth1: link down [ 27.202047] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 28.691268] eth0: no IPv6 routers present [ 29.902209] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none [ 29.903383] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 30.184978] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 32.070648] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 8, phase 4, 99 us [ 2050.103041] npviewer.bin[4420]: segfault at efc74054 ip 00000000f6267733 sp 00000000ffef7eb0 error 4 in libflashplayer.so[f5ec8000+b2c000] [ 2402.473271] npviewer.bin[4779]: segfault at 0 ip 00000000f622f741 sp 00000000ff9e9980 error 4 in libflashplayer.so[f5e90000+b2c000] [ 3048.684342] npviewer.bin[5017]: segfault at f19eb04c ip 00000000f62f7757 sp 00000000fff5c1c0 error 4 in libflashplayer.so[f5f58000+b2c000] [ 7543.820232] usb 2-4.1: unlink qh32-0601/ffff8801a7bcfb00 start 2 [1/2 us] [ 7543.832501] ehci_hcd 0000:00:1d.7: reused qh ffff8801a7bcfb00 schedule [ 7543.832506] usb 2-4.1: link qh32-0601/ffff8801a7bcfb00 start 2 [1/2 us] [ 7543.882881] hub 2-4:1.0: state 7 ports 4 chg 0000 evt 0002 [ 7543.883108] hub 2-4:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 7543.883111] usb 2-4.1: USB disconnect, address 5 [ 7543.884419] usb 2-4.1: unregistering device [ 7543.884421] usb 2-4.1: usb_disable_device nuking all URBs [ 7543.884427] usb 2-4.1: unlink qh32-0601/ffff8801a7bcfb00 start 2 [1/2 us] [ 7543.884433] ehci_hcd 0000:00:1d.7: shutdown urb ffff8801a6bad780 ep3in-intr [ 7543.884435] usb 2-4.1: unregistering interface 2-4.1:1.0 [ 7543.884598] usb 2-4.1: unregistering interface 2-4.1:1.1 [ 7543.884615] usb 2-4.1: unregistering interface 2-4.1:1.2 [ 7543.884629] usb 2-4.1: unregistering interface 2-4.1:1.3 [ 7543.999361] hub 2-4:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 7620.084794] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 7620.084804] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 7620.084812] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s [ 7620.188516] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 [ 7620.239584] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion [ 7620.239590] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT [ 7620.239594] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 7620.239653] usb usb4: wakeup_rh (auto-start) [ 7620.290353] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 7620.290374] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 7620.290381] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 7620.290387] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 7620.394285] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 7620.496165] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 7620.631252] usb 4-1: skipped 10 descriptors after interface [ 7620.631256] usb 4-1: skipped 2 descriptors after interface [ 7620.631259] usb 4-1: skipped 1 descriptor after endpoint [ 7620.631261] usb 4-1: skipped 2 descriptors after interface [ 7620.631264] usb 4-1: skipped 1 descriptor after endpoint [ 7620.631266] usb 4-1: skipped 1 descriptor after interface [ 7620.636270] usb 4-1: default language 0x0409 [ 7620.641266] usb 4-1: udev 2, busnum 4, minor = 385 [ 7620.641270] usb 4-1: New USB device found, idVendor=0d8c, idProduct=000c [ 7620.643289] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7620.645356] usb 4-1: Product: C-Media USB Headphone Set [ 7620.647492] usb 4-1: usb_probe_device [ 7620.647496] usb 4-1: configuration #1 chosen from 1 choice [ 7620.650232] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 7620.650287] snd-usb-audio 4-1:1.0: usb_probe_interface [ 7620.650293] snd-usb-audio 4-1:1.0: usb_probe_interface - got id [ 7620.727519] usb 4-1: adding 4-1:1.1 (config #1, interface 1) [ 7620.727541] usb 4-1: adding 4-1:1.2 (config #1, interface 2) [ 7620.727559] usb 4-1: adding 4-1:1.3 (config #1, interface 3) [ 7620.727589] usbhid 4-1:1.3: usb_probe_interface [ 7620.727592] usbhid 4-1:1.3: usb_probe_interface - got id [ 7620.730207] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.3/input/input9 [ 7620.732379] uhci_hcd 0000:00:1a.1: reserve dev 2 ep83-INT, period 32, phase 16, 14 us [ 7620.732450] generic-usb 0003:0D8C:000C.0008: input,hidraw6: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1a.1-1/input3 [ 7620.734671] drivers/usb/core/inode.c: creating file '002' [ 7620.734691] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 9543.147441] usb 4-1: uhci_result_common: failed with status 440000 [ 9543.147451] uhci_hcd 0000:00:1a.1: release dev 2 ep83-INT, period 32, phase 16, 14 us [ 9543.159635] uhci_hcd 0000:00:1a.1: reserve dev 2 ep83-INT, period 32, phase 16, 14 us [ 9543.225572] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 9543.225581] uhci_hcd 0000:00:1a.1: port 1 portsc 008a,00 [ 9543.225591] hub 4-0:1.0: port 1, status 0100, change 0003, 12 Mb/s [ 9543.225593] usb 4-1: USB disconnect, address 2 [ 9543.227756] usb 4-1: unregistering device [ 9543.227760] usb 4-1: usb_disable_device nuking all URBs [ 9543.227770] uhci_hcd 0000:00:1a.1: shutdown urb ffff88015d471780 ep3in-intr [ 9543.229345] uhci_hcd 0000:00:1a.1: release dev 2 ep83-INT, period 32, phase 16, 14 us [ 9543.229354] usb 4-1: unregistering interface 4-1:1.0 [ 9543.229608] usb 4-1: unregistering interface 4-1:1.1 [ 9543.229634] usb 4-1: unregistering interface 4-1:1.2 [ 9543.229659] usb 4-1: unregistering interface 4-1:1.3 [ 9543.346348] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 9544.474141] usb usb4: suspend_rh (auto-stop) [ 9562.906295] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 9562.906305] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 9562.906313] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s [ 9563.009787] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 [ 9563.060907] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion [ 9563.060910] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT [ 9563.060917] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 9563.061023] usb usb4: wakeup_rh (auto-start) [ 9563.111670] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 9563.111701] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 9563.111710] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 9563.111719] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 9563.215551] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 9563.317432] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 9563.452288] usb 4-1: skipped 10 descriptors after interface [ 9563.452291] usb 4-1: skipped 2 descriptors after interface [ 9563.452295] usb 4-1: skipped 1 descriptor after endpoint [ 9563.452297] usb 4-1: skipped 2 descriptors after interface [ 9563.452299] usb 4-1: skipped 1 descriptor after endpoint [ 9563.452301] usb 4-1: skipped 1 descriptor after interface [ 9563.456598] usb 4-1: default language 0x0409 [ 9563.461639] usb 4-1: udev 3, busnum 4, minor = 386 [ 9563.461642] usb 4-1: New USB device found, idVendor=0d8c, idProduct=000c [ 9563.463754] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9563.465943] usb 4-1: Product: C-Media USB Headphone Set [ 9563.468179] usb 4-1: usb_probe_device [ 9563.468183] usb 4-1: configuration #1 chosen from 1 choice [ 9563.470603] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 9563.470662] snd-usb-audio 4-1:1.0: usb_probe_interface [ 9563.470670] snd-usb-audio 4-1:1.0: usb_probe_interface - got id [ 9563.547911] usb 4-1: adding 4-1:1.1 (config #1, interface 1) [ 9563.547942] usb 4-1: adding 4-1:1.2 (config #1, interface 2) [ 9563.547974] usb 4-1: adding 4-1:1.3 (config #1, interface 3) [ 9563.548023] usbhid 4-1:1.3: usb_probe_interface [ 9563.548027] usbhid 4-1:1.3: usb_probe_interface - got id [ 9563.550582] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.3/input/input10 [ 9563.552850] uhci_hcd 0000:00:1a.1: reserve dev 3 ep83-INT, period 32, phase 16, 14 us [ 9563.552968] generic-usb 0003:0D8C:000C.0009: input,hidraw6: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1a.1-1/input3 [ 9563.555231] drivers/usb/core/inode.c: creating file '003' [ 9563.555256] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 9667.254977] uhci_hcd 0000:00:1a.1: reserve dev 3 ep01-ISO, period 1, phase 0, 164 us [ 9677.190556] uhci_hcd 0000:00:1a.1: release dev 3 ep01-ISO, period 1, phase 0, 164 us [ 9677.625031] uhci_hcd 0000:00:1a.1: reserve dev 3 ep01-ISO, period 1, phase 0, 164 us [11490.748351] uhci_hcd 0000:00:1a.1: release dev 3 ep01-ISO, period 1, phase 0, 164 us [11493.578607] vlc[6342]: segfault at 8 ip 00007fc04fb10adb sp 00007fff7e13ef58 error 4 in libQtDBus.so.4.6.3[7fc04faca000+79000] [11975.615212] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 [11975.615222] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001002 POWER sig=se0 CSC [11975.615230] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [11975.615233] usb 1-1: USB disconnect, address 2 [11975.616785] usb 1-1: unregistering device [11975.616787] usb 1-1: usb_disable_device nuking all URBs [11975.616791] usb 1-1: unlink qh256-0001/ffff8801a88b1380 start 1 [1/0 us] [11975.616855] ehci_hcd 0000:00:1a.7: shutdown urb ffff8801a8899900 ep1in-intr [11975.616858] usb 1-1: unregistering interface 1-1:1.0 [11975.720017] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [35910.313132] uhci_hcd 0000:00:1a.1: reserve dev 3 ep01-ISO, period 1, phase 0, 164 us [35919.304869] uhci_hcd 0000:00:1a.1: release dev 3 ep01-ISO, period 1, phase 0, 164 us [35919.748310] uhci_hcd 0000:00:1a.1: reserve dev 3 ep01-ISO, period 1, phase 0, 164 us [38146.540506] uhci_hcd 0000:00:1a.1: release dev 3 ep01-ISO, period 1, phase 0, 164 us [38150.110819] vlc[8976]: segfault at 8 ip 00007effdb57eadb sp 00007fff1d4b4ee8 error 4 in libQtDBus.so.4.6.3[7effdb538000+79000] [38709.864431] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 [38709.864441] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [38709.864449] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s [38709.967843] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 [38710.018977] ehci_hcd 0000:00:1a.7: port 1 high speed [38710.018980] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [38710.069707] usb 1-1: new high speed USB device using ehci_hcd and address 7 [38710.121859] ehci_hcd 0000:00:1a.7: port 1 high speed [38710.121862] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [38710.185052] usb 1-1: default language 0x0409 [38710.185321] usb 1-1: udev 7, busnum 1, minor = 6 [38710.185324] usb 1-1: New USB device found, idVendor=0409, idProduct=0058 [38710.186972] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [38710.188583] usb 1-1: Product: USB2.0 Hub Controller [38710.190181] usb 1-1: Manufacturer: NEC Corporation [38710.191839] usb 1-1: usb_probe_device [38710.191842] usb 1-1: configuration #1 chosen from 1 choice [38710.192064] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [38710.192093] hub 1-1:1.0: usb_probe_interface [38710.192095] hub 1-1:1.0: usb_probe_interface - got id [38710.192097] hub 1-1:1.0: USB hub found [38710.193787] hub 1-1:1.0: 4 ports detected [38710.195414] hub 1-1:1.0: standalone hub [38710.195416] hub 1-1:1.0: individual port power switching [38710.195418] hub 1-1:1.0: individual port over-current protection [38710.195419] hub 1-1:1.0: Single TT [38710.195421] hub 1-1:1.0: TT requires at most 16 FS bit times (1332 ns) [38710.195423] hub 1-1:1.0: Port indicators are supported [38710.195424] hub 1-1:1.0: power on to power good time: 100ms [38710.195657] hub 1-1:1.0: local power source is good [38710.195659] hub 1-1:1.0: enabling power on all ports [38710.196172] drivers/usb/core/inode.c: creating file '007' [38710.295803] usb 1-1: link qh256-0001/ffff8801948cbd00 start 2 [1/0 us] [38710.295818] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 [39957.733464] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 [39957.733471] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001002 POWER sig=se0 CSC [39957.733477] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [39957.733479] usb 1-1: USB disconnect, address 7 [39957.735124] usb 1-1: unregistering device [39957.735126] usb 1-1: usb_disable_device nuking all URBs [39957.735132] usb 1-1: unlink qh256-0001/ffff8801948cbd00 start 2 [1/0 us] [39957.735194] ehci_hcd 0000:00:1a.7: shutdown urb ffff88008cb0ce40 ep1in-intr [39957.735197] usb 1-1: unregistering interface 1-1:1.0 [39957.839031] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100