Linux version 2.6.12-gentoo-r10 (root@thread) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 SMP Fri Sep 30 12:14:49 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable) BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS) BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 319MB LOWMEM available. found SMP MP-table at 000f5ae0 On node 0 totalpages: 81904 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 77808 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 ABIT ) @ 0x000f7370 ACPI: RSDT (v001 ABIT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x13ff3000 ACPI: FADT (v001 ABIT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x13ff3040 ACPI: MADT (v001 ABIT 0x00000000 0x00000000) @ 0x13ff5280 ACPI: DSDT (v001 ABIT AWRDACPI 0x00001000 INTL 0x20031203) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 17 ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 14000000 (gap: 14000000:eac00000) Built 1 zonelists Kernel command line: root=/dev/hde3 noapic parport=auto mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 534.609 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 320688k/327616k available (2051k kernel code, 6440k reserved, 935k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1052.67 BogoMIPS (lpj=526336) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 1c80) CPU0: Intel Celeron (Mendocino) stepping 05 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay loop... 1064.96 BogoMIPS (lpj=532480) CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Celeron (Mendocino) stepping 05 Total of 2 processors activated (2117.63 BogoMIPS). checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report audit: initializing netlink socket (disabled) audit(1128103813.709:0): initialized inotify device minor=63 Initializing Cryptographic API Limiting direct PCI/PCI transfers. Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 32M @ 0xda000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7 [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] ACPI: Power Button (FF) [PWRF] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (36 C) isapnp: Scanning for PnP cards... pnp: SB audio device quirk - increasing port range pnp: AWE32 quirk - adding two ports isapnp: Card 'Creative SB AWE64 PnP' isapnp: 1 Plug & Play card detected total PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A mice: PS/2 mouse device common for all mice io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xb400. Vers LK1.1.19 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 0000:00:0b.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xb800. Vers LK1.1.19 eth1: Dropping NETIF_F_SG since no checksum feature. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... PDC20267: IDE controller at PCI slot 0000:00:0d.0 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PDC20267: chipset revision 2 PDC20267: 100% native mode on irq 10 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:DMA, hdh:pio Probing IDE interface ide2... hde: MAXTOR 6L020J1, ATA DISK drive ide2 at 0xbc00-0xbc07,0xc002 on irq 10 Probing IDE interface ide3... hdg: WDC WD2500JB-00GVA0, ATA DISK drive ide3 at 0xc400-0xc407,0xc802 on irq 10 HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller at PCI slot 0000:00:13.0 ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 HPT366: chipset revision 1 HPT366: 100% native mode on irq 11 ide4: BM-DMA at 0xd800-0xd807, BIOS settings: hdi:pio, hdj:pio ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ide5: BM-DMA at 0xe400-0xe407, BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide4... Probing IDE interface ide5... hde: max request size: 128KiB hde: 39851760 sectors (20404 MB) w/1819KiB Cache, CHS=39535/16/63, UDMA(100) hde: cache flushes supported hde: hde1 hde2 hde3 hdg: max request size: 128KiB hdg: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) hdg: cache flushes supported hdg: hdg1 hda: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 12, io base 0x0000b000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected i2c /dev entries driver piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack version 2.1 (2559 buckets, 20472 max) - 216 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq ReiserFS: hde3: found reiserfs format "3.6" with standard journal ReiserFS: hde3: using ordered data mode ReiserFS: hde3: journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hde3: checking transaction log (hde3) ReiserFS: hde3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 204k freed Adding 506036k swap on /dev/hde2. Priority:-1 extents:1 ReiserFS: hdg1: found reiserfs format "3.6" with standard journal ReiserFS: hdg1: using ordered data mode ReiserFS: hdg1: journal params: device hdg1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdg1: checking transaction log (hdg1) ReiserFS: hdg1: Using r5 hash to sort names