Linux version 2.6.35-rc4-10771-g7a6b289-dirty (root@Flatron) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #5 SMP PREEMPT Tue Sep 14 18:52:12 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz-2.6.35-rc4-10771-g7a6b289-dirty root=/dev/sda8 ro video=uvesafb:1400x1050-32 snd-hda-intel.enable_msi=1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
 BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
 BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
 BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CEFFF write-protect
  CF000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 100000000 mask FE0000000 write-back
  3 base 0DFF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f5030] f5030
init_memory_mapping: 0000000000000000-00000000dfee0000
 0000000000 - 00dfe00000 page 2M
 00dfe00000 - 00dfee0000 page 4k
kernel direct mapping tables up to dfee0000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000120000000
 0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ c000-12000
ACPI: RSDP 00000000000f6a20 00014 (v00 GBT   )
ACPI: RSDT 00000000dfee3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000dfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000dfee3180 04B2A (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000dfee0000 00040
ACPI: HPET 00000000dfee7e00 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000dfee7e80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000dfee7d00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000dfee87e0 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x0000009d
    0: 0x00000100 -> 0x000dfee0
    0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1048188
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3940 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 898840 pages, LIFO batch:31
  Normal zone: 1792 pages used for memmap
  Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [7000 - 77ff]
Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s76352 r8192 d21952 u524288
pcpu-alloc: s76352 r8192 d21952 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1032060
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35-rc4-10771-g7a6b289-dirty root=/dev/sda8 ro video=uvesafb:1400x1050-32 snd-hda-intel.enable_msi=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Subtract (54 early reservations)
  #1 [0001000000 - 00017aa964]   TEXT DATA BSS
  #2 [00017ab000 - 00017ab0ee]             BRK
  #3 [00000f5040 - 0000100000]   BIOS reserved
  #4 [00000f5030 - 00000f5040]    MP-table mpf
  #5 [000009dc00 - 00000f0d00]   BIOS reserved
  #6 [00000f0eb4 - 00000f5030]   BIOS reserved
  #7 [00000f0d00 - 00000f0eb4]    MP-table mpc
  #8 [0000001000 - 0000003000]      TRAMPOLINE
  #9 [0000003000 - 0000007000]     ACPI WAKEUP
  #10 [0000008000 - 000000c000]         PGTABLE
  #11 [000000c000 - 000000d000]         PGTABLE
  #12 [00017ab100 - 00017ac100]         BOOTMEM
  #13 [00017aa980 - 00017aab80]         BOOTMEM
  #14 [0001fad000 - 0001fae000]         BOOTMEM
  #15 [0001fae000 - 0001faf000]         BOOTMEM
  #16 [0002000000 - 0005a00000]        MEMMAP 0
  #17 [00017aab80 - 00017aad00]         BOOTMEM
  #18 [00017ac100 - 00017c4100]         BOOTMEM
  #19 [00017c4100 - 00017c7100]         BOOTMEM
  #20 [00017c8000 - 00017c9000]         BOOTMEM
  #21 [00017aad00 - 00017aad41]         BOOTMEM
  #22 [00017aad80 - 00017aadc3]         BOOTMEM
  #23 [00017c7100 - 00017c7368]         BOOTMEM
  #24 [00017aae00 - 00017aae68]         BOOTMEM
  #25 [00017aae80 - 00017aaee8]         BOOTMEM
  #26 [00017aaf00 - 00017aaf68]         BOOTMEM
  #27 [00017aaf80 - 00017aafe8]         BOOTMEM
  #28 [00017c7380 - 00017c73e8]         BOOTMEM
  #29 [00017c7400 - 00017c7468]         BOOTMEM
  #30 [00017c7480 - 00017c74e8]         BOOTMEM
  #31 [00017c7500 - 00017c7568]         BOOTMEM
  #32 [00017c7580 - 00017c75e8]         BOOTMEM
  #33 [00017c7600 - 00017c7668]         BOOTMEM
  #34 [00017c7680 - 00017c76fc]         BOOTMEM
  #35 [00017c7700 - 00017c777c]         BOOTMEM
  #36 [0001800000 - 000181a000]         BOOTMEM
  #37 [0001880000 - 000189a000]         BOOTMEM
  #38 [0001900000 - 000191a000]         BOOTMEM
  #39 [0001980000 - 000199a000]         BOOTMEM
  #40 [00017c7780 - 00017c7788]         BOOTMEM
  #41 [00017c77c0 - 00017c77c8]         BOOTMEM
  #42 [00017c7800 - 00017c7810]         BOOTMEM
  #43 [00017c7840 - 00017c7860]         BOOTMEM
  #44 [00017c7880 - 00017c79b0]         BOOTMEM
  #45 [00017c79c0 - 00017c7a10]         BOOTMEM
  #46 [00017c7a40 - 00017c7a90]         BOOTMEM
  #47 [00017c9000 - 00017d1000]         BOOTMEM
  #48 [000199a000 - 0001d9a000]         BOOTMEM
  #49 [0001d9a000 - 0001f9a000]         BOOTMEM
  #50 [0005a00000 - 0009a00000]         BOOTMEM
  #51 [00017d1000 - 00017f1000]         BOOTMEM
  #52 [000181a000 - 000185a000]         BOOTMEM
  #53 [000000d000 - 0000015000]         BOOTMEM
Memory: 4052792k/4718592k available (4435k kernel code, 525840k absent, 139960k reserved, 2525k data, 480k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:384
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.138 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.27 BogoMIPS (lpj=2400138)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Booting Node   0, Processors  #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (19199.88 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 00000000dfee7f00 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000dfee83c0 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000dfee8520 00152 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000dfee8680 00152 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xe200-0xe21f]
pci 0000:00:1a.1: reg 20: [io  0xe000-0xe01f]
pci 0000:00:1a.2: reg 20: [io  0xe100-0xe11f]
pci 0000:00:1a.7: reg 10: [mem 0xf8105000-0xf81053ff]
pci 0000:00:1b.0: reg 10: [mem 0xf8100000-0xf8103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xe300-0xe31f]
pci 0000:00:1d.1: reg 20: [io  0xe400-0xe41f]
pci 0000:00:1d.2: reg 20: [io  0xe500-0xe51f]
pci 0000:00:1d.7: reg 10: [mem 0xf8104000-0xf81043ff]
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: reg 10: [io  0xe600-0xe607]
pci 0000:00:1f.2: reg 14: [io  0xe700-0xe703]
pci 0000:00:1f.2: reg 18: [io  0xe800-0xe807]
pci 0000:00:1f.2: reg 1c: [io  0xe900-0xe903]
pci 0000:00:1f.2: reg 20: [io  0xea00-0xea1f]
pci 0000:00:1f.2: reg 24: [mem 0xf8106000-0xf81067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf8107000-0xf81070ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf501ffff 64bit]
pci 0000:01:00.0: reg 20: [io  0xc000-0xc0ff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xf5020000-0xf5023fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:04:00.0: reg 18: [mem 0xf7000000-0xf7000fff 64bit]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.5:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:06.0: reg 10: [mem 0xf8004000-0xf80047ff]
pci 0000:05:06.0: reg 14: [mem 0xf8000000-0xf8003fff]
pci 0000:05:06.0: supports D1 D2
pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:06.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff 
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:07: [io  0x0400-0x04bf] could not be reserved
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: [mem 0x000d2800-0x000d3fff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0x000e0000-0x000effff] has been reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xf8200000-0xf83fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
pci 0000:00:1c.4: BAR 8: assigned [mem 0xf8600000-0xf87fffff]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xf8a00000-0xf8bfffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.0:   bridge window [mem 0xf8200000-0xf83fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.4:   bridge window [mem 0xf8600000-0xf87fffff]
pci 0000:00:1c.4:   bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf8a00000-0xf8a0ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.5:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.5:   bridge window [mem 0xf8a00000-0xf8bfffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xf8200000-0xf83fffff]
pci_bus 0000:02: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xf8600000-0xf87fffff]
pci_bus 0000:03: resource 2 [mem 0xf8800000-0xf89fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:04: resource 2 [mem 0xf8a00000-0xf8bfffff pref]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Slow work thread pool: Starting up
Slow work thread pool: Ready
fuse init (API version 7.14)
msgmni has been set to 7915
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[drm] register mmio base: 0xF5000000
[drm] register mmio size: 131072
swapper:1 freeing invalid memtype e0000000-e0040000
ATOM BIOS: JUNIPER
[drm] Clocks initialized !
radeon 0000:01:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 2026396 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading JUNIPER Microcode
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DisplayPort
[drm]   HPD4
[drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   HDMI-A
[drm]   HPD5
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY1
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm]   DVI-I
[drm]   HPD6
[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm]   Encoders:
[drm]     DFP4: INTERNAL_UNIPHY
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xE0140000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106280 irq 45
ata5: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106300 irq 45
ata6: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106380 irq 45
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 46 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000005c000, 00:1a:4d:4e:10:dd, XID 18000000 IRQ 46
firewire_ohci 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8105000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8104000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e200
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.35-rc4-10771-g7a6b289-dirty uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for PocketPC PDA
usbcore: registered new interface driver ipaq
ipaq: v1.0:USB PocketPC PDA driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
coretemp coretemp.0: TjMax is assumed as 100 C!
coretemp coretemp.1: TjMax is assumed as 100 C!
coretemp coretemp.2: TjMax is assumed as 100 C!
coretemp coretemp.3: TjMax is assumed as 100 C!
it87: Found IT8718F chip at 0x290, revision 4
it87: VID is disabled (pins used for GPIO)
it87: in3 is VCC (+5V)
it87: Beeping is supported
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
hda_intel: position_fix set to 1 for device 1458:a022
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889A: BIOS auto-probing.
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
hda-codec: No codec parser is available
ALSA device list:
  #0: HDA Intel at 0xf8100000 irq 47
  #1: HD-Audio Generic at 0xf5020000 irq 48
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
rtc_cmos 00:04: setting system clock to 2010-09-14 18:57:47 UTC (1284490667)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: HPA detected: current 1250261615, native 1250263728
ata1.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
ata1.00: 1250261615 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-3: new high speed USB device using ehci_hcd and address 3
firewire_core: created device fw0: GUID 00c81d5d00001a4d, S400
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-3: New USB device found, idVendor=1307, idProduct=0330
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: Generic   
usb 1-3: SerialNumber: 00000000000006
scsi6 : usb-storage 1-3:1.0
ata3: SATA link down (SStatus 0 SControl 300)
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: New USB device found, idVendor=045e, idProduct=00dd
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Comfort Curve Keyboard 2000
usb 3-2: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.0-2/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.0-2/input1
usb 8-1: new full speed USB device using uhci_hcd and address 2
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: ATAPI   iHAS224   Y, ZL0Y, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            ATAPI    iHAS224   Y      ZL0Y PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
scsi 6:0:0:0: Direct-Access     Generic  USB  CF Reader   0.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Direct-Access     Generic  USB  SD Reader   0.00 PQ: 0 ANSI: 2
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
scsi 6:0:0:2: Direct-Access     Generic  USB  MS Reader   0.00 PQ: 0 ANSI: 2
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg4 type 0
scsi 6:0:0:3: Direct-Access     Generic  USB  SM Reader   0.00 PQ: 0 ANSI: 2
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
usb 8-1: New USB device found, idVendor=09da, idProduct=8090
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Full Speed
usb 8-1: Manufacturer: A4Tech
input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
generic-usb 0003:09DA:8090.0003: input,hidraw2: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.2-1/input0
input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input5
generic-usb 0003:09DA:8090.0004: input,hidraw3: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.2-1/input1
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 8:8.
Freeing unused kernel memory: 480k freed
udev[4177]: starting version 162
EXT4-fs (sda8): re-mounted. Opts: (null)
Adding 4728400k swap on /dev/sda9.  Priority:-1 extents:1 across:4728400k 
r8169 0000:04:00.0: eth0: link up
r8169 0000:04:00.0: eth0: link up
ata1.00: configured for UDMA/133
ata1: EH complete
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
X:5200 freeing invalid memtype e10a1000-e10a5000
X:5200 freeing invalid memtype e10b1000-e10b5000
X:5200 freeing invalid memtype e108f000-e1090000
X:5200 freeing invalid memtype e10c8000-e10c9000
X:5200 freeing invalid memtype e10e5000-e10e6000
X:5200 freeing invalid memtype e1203000-e1206000
X:5200 freeing invalid memtype e1212000-e1216000
X:5200 freeing invalid memtype e1236000-e123a000
X:5200 freeing invalid memtype e1128000-e112c000
X:5200 freeing invalid memtype e115e000-e115f000
X:5200 freeing invalid memtype e115f000-e1163000
X:5200 freeing invalid memtype e123e000-e123f000
X:5200 freeing invalid memtype e1166000-e116a000
X:5200 freeing invalid memtype e1172000-e1176000
X:5200 freeing invalid memtype e12bb000-e13e7000
X:5200 freeing invalid memtype e11e8000-e11ec000
X:5200 freeing invalid memtype e10d8000-e10dc000
X:5200 freeing invalid memtype e11f8000-e11fc000
X:5200 freeing invalid memtype e1434000-e1438000
X:5200 freeing invalid memtype e1123000-e1124000
X:5200 freeing invalid memtype e13f0000-e13f1000
X:5200 freeing invalid memtype e1438000-e1564000
X:5200 freeing invalid memtype e12a2000-e12a7000
X:5200 freeing invalid memtype e12a9000-e12aa000
X:5200 freeing invalid memtype e12b0000-e12b1000
X:5200 freeing invalid memtype e12b2000-e12b3000
X:5200 freeing invalid memtype e12b3000-e12b4000
X:5200 freeing invalid memtype e13f1000-e13f6000
X:5200 freeing invalid memtype e1413000-e1414000
X:5200 freeing invalid memtype e12aa000-e12ab000
X:5200 freeing invalid memtype e25a9000-e25aa000
X:5200 freeing invalid memtype e1165000-e1166000
X:5200 freeing invalid memtype e112e000-e112f000
X:5200 freeing invalid memtype e1231000-e1232000
X:5200 freeing invalid memtype e1124000-e1128000
X:5200 freeing invalid memtype e1155000-e1156000
X:5200 freeing invalid memtype e13fc000-e1400000
X:5200 freeing invalid memtype e1401000-e1402000
X:5200 freeing invalid memtype e141d000-e141e000
X:5200 freeing invalid memtype e141e000-e141f000
X:5200 freeing invalid memtype e25aa000-e25ab000
X:5200 freeing invalid memtype e3b62000-e3e74000
X:5200 freeing invalid memtype e25b3000-e25b6000
X:5200 freeing invalid memtype e162a000-e166c000
X:5200 freeing invalid memtype e25ab000-e25af000
X:5200 freeing invalid memtype e140c000-e140d000
X:5200 freeing invalid memtype e25c6000-e25c7000
X:5200 freeing invalid memtype e25a1000-e25a2000
X:5200 freeing invalid memtype e25cb000-e25ed000
X:5200 freeing invalid memtype e2628000-e264b000
X:5200 freeing invalid memtype e25a8000-e25a9000
X:5200 freeing invalid memtype e1566000-e1567000
X:5200 freeing invalid memtype e158e000-e158f000
X:5200 freeing invalid memtype e15a2000-e15a3000
X:5200 freeing invalid memtype e15cd000-e15ce000
X:5200 freeing invalid memtype e15cf000-e15d0000
X:5200 freeing invalid memtype e264c000-e264d000
X:5200 freeing invalid memtype e158f000-e1594000
X:5200 freeing invalid memtype e1588000-e158c000
X:5200 freeing invalid memtype e3f63000-e4052000
X:5200 freeing invalid memtype e2623000-e2624000
X:5200 freeing invalid memtype e3b4b000-e3b4c000
X:5200 freeing invalid memtype e1624000-e1625000
X:5200 freeing invalid memtype e3b5b000-e3b5f000
X:5200 freeing invalid memtype e1578000-e157a000
X:5200 freeing invalid memtype e3b1b000-e3b1f000
X:5200 freeing invalid memtype e2596000-e2599000
X:5200 freeing invalid memtype e12b8000-e12ba000
X:5200 freeing invalid memtype e1430000-e1433000
X:5200 freeing invalid memtype e112f000-e1130000
X:5200 freeing invalid memtype e11ac000-e11da000
X:5200 freeing invalid memtype e12ab000-e12ac000
X:5200 freeing invalid memtype e608e000-e608f000
X:5200 freeing invalid memtype e5d8f000-e5d90000
X:5200 freeing invalid memtype e4291000-e42ae000
X:5200 freeing invalid memtype e474b000-e4772000
X:5200 freeing invalid memtype e5e41000-e5e5f000
X:5200 freeing invalid memtype e608f000-e60ad000
X:5200 freeing invalid memtype e4b43000-e4b44000
X:5200 freeing invalid memtype e45b1000-e45d3000
X:5200 freeing invalid memtype e1152000-e1154000
X:5200 freeing invalid memtype e4711000-e4716000
X:5200 freeing invalid memtype e3f5e000-e3f62000
X:5200 freeing invalid memtype e1b2f000-e1b51000
X:5200 freeing invalid memtype e15c1000-e15c2000