4 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ac00 - 000000000009ffff 
reserve RAM buffer: 00000000db65f000 - 00000000dbffffff 
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x1003] has been reserved
system 00:05: [io  0x1004-0x1013] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf69c0000-0xf69c0fff] has been reserved
pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x4000000)
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf6a00000-0xf6bfffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xf6c00000-0xf6dfffff 64bit pref]
pci 0000:00:1c.3: BAR 9: assigned [mem 0xf6e00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.0:   bridge window [mem 0xf5500000-0xf68fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.1:   bridge window [mem 0xf4100000-0xf54fffff]
pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref]
pci 0000:03:00.0: BAR 9: can't assign mem pref (size 0x4000000)
pci 0000:03:00.0: BAR 10: can't assign mem (size 0x4000000)
pci 0000:03:00.0: BAR 7: assigned [io  0x2000-0x20ff]
pci 0000:03:00.0: BAR 8: assigned [io  0x2400-0x24ff]
pci 0000:03:00.0: CardBus bridge to [bus 04-07]
pci 0000:03:00.0:   bridge window [io  0x2000-0x20ff]
pci 0000:03:00.0:   bridge window [io  0x2400-0x24ff]
pci 0000:00:1c.2: PCI bridge to [bus 03-04]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf2cfffff]
pci 0000:00:1c.2:   bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0xf2d00000-0xf40fffff]
pci 0000:00:1c.3:   bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:03:00.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xf5500000-0xf68fffff]
pci_bus 0000:01: resource 2 [mem 0xf6a00000-0xf6bfffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf54fffff]
pci_bus 0000:02: resource 2 [mem 0xf6c00000-0xf6dfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf2cfffff]
pci_bus 0000:04: resource 0 [io  0x2000-0x20ff]
pci_bus 0000:04: resource 1 [io  0x2400-0x24ff]
pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf2d00000-0xf40fffff]
pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6ffffff 64bit pref]
pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880006200000 - ffff88000a200000
software IO TLB at phys 0x6200000 - 0xa200000
Simple Boot Flag at 0xf1 set to 0x1
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1284988592.333:1): initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/O].
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.15)
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Btrfs loaded
msgmni has been set to 7505
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 15 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 15 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 15 
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 15 
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
Initializing Nozomi driver 2.1d (build date: Sep 18 2010 11:44:53)
Non-volatile memory driver v1.3
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
ipwireless 1.1 by Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[drm] MTRR allocation failed.  Graphics performance may suffer.
[drm] set up 31M of stolen space
[drm:init_status_page], render ring hws offset: 0x02000000
[drm:init_status_page], bsd ring hws offset: 0x02021000
[drm:i915_gtt_to_phys], GTT addr: 0x00000000, PTE: 0xde000001
[drm:i915_gtt_to_phys], GTT addr: 0x00000000, phys addr: 0xde000000
[drm:i915_setup_compression], FBC base 0xde000000, ll base 0x00000000, size 8M
[drm:parse_general_definitions], crt_ddc_bus_pin: 2
[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x8 0xa
[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[drm:intel_modeset_init], 2 display pipes available.
[drm:intel_lvds_init], LVDS is not present in VBT
[drm:intel_dp_i2c_init], i2c_init DPDDC-A
[drm:intel_dp_i2c_aux_ch], aux_ch nack
[drm:intel_dp_i2c_aux_ch], aux_ch nack
[drm:intel_sdvo_read_byte], i2c transfer returned -6
[drm:intel_sdvo_init], No SDVO device found on SDVOB
[drm:intel_dp_i2c_init], i2c_init DPDDC-B
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_i2c_init], i2c_init DPDDC-C
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_i2c_init], i2c_init DPDDC-D
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:ironlake_enable_drps], fmax: 0, fmin: 10, fstart: 0
[drm:ironlake_edp_backlight_off], 
[drm:intel_dp_link_down], 
[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[drm:ironlake_disable_fbc], disabled FBC
[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
[drm:ironlake_crtc_dpms], crtc 1 is disabled
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:Embedded DisplayPort-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x501500e1
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:Embedded DisplayPort-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:VGA-1]
[drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:VGA-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI Type A-1]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI Type A-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DisplayPort-1]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DisplayPort-1] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI Type A-2]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI Type A-2] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI Type A-3]
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI Type A-3] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DisplayPort-2]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DisplayPort-2] disconnected
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DisplayPort-3]
[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[drm:ironlake_dp_detect], DPCD: 0000
[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DisplayPort-3] disconnected
No connectors reported connected with modes
[drm:drm_setup_crtcs], 
[drm:drm_enable_connectors], connector 5 enabled? no
[drm:drm_enable_connectors], connector 8 enabled? no
[drm:drm_enable_connectors], connector 10 enabled? no
[drm:drm_enable_connectors], connector 12 enabled? no
[drm:drm_enable_connectors], connector 14 enabled? no
[drm:drm_enable_connectors], connector 16 enabled? no
[drm:drm_enable_connectors], connector 18 enabled? no
[drm:drm_enable_connectors], connector 20 enabled? no
[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[drm] Cannot find any crtc or sizes - going 1024x768
[drm:intelfb_create], allocated 1024x768 fb: 0x02042000, bo ffff880113829200
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:22] #connectors=0 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:ironlake_edp_backlight_off], 
[drm:drm_crtc_helper_set_config], 
[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=0 (x y) (0 0)
[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[drm:ironlake_edp_backlight_off], 
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm:intel_opregion_init], graphic opregion physical addr: 0xdb749018
[drm:intel_opregion_init], Public ACPI methods supported
[drm:intel_opregion_init], SWSCI supported
[drm:intel_opregion_init], ASLE supported
acpi device:42: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input4
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
0000:00:16.3: ttyS0 at I/O 0x70a0 (irq = 19) is a 16550A
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-cd driver 5.00
SCSI Media Changer driver v0.25 
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940300 irq 18
ata6: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940380 irq 18
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver plusb
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver int51x1
usbcore: registered new interface driver ipheth
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:02:00.0: setting latency timer to 64
iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
yenta_cardbus 0000:03:00.0: CardBus bridge found [1028:040b]
yenta_cardbus 0000:03:00.0: CardBus bridge to [bus 04-07]
yenta_cardbus 0000:03:00.0:   bridge window [io  0x2000-0x20ff]
yenta_cardbus 0000:03:00.0:   bridge window [io  0x2400-0x24ff]
yenta_cardbus 0000:03:00.0:   bridge window [mem 0xf0400000-0xf17fffff pref]
yenta_cardbus 0000:03:00.0:   bridge window [mem 0xf1800000-0xf1bfffff]
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATA-8: OCZ-VERTEX, 1.42, max UDMA/133
ata2.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATA-8: ST9250410AS, D005SDM1, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST9250410AS      D005 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      OCZ-VERTEX       1.42 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
yenta_cardbus 0000:03:00.0: ISA IRQ mask 0x0000, PCI irq 18
yenta_cardbus 0000:03:00.0: Socket status: 30000006
pci_bus 0000:04: Upper limit for fixing this bridge's parent bridge: #04
yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0xf0400000-0xf2cfffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0400000-0xf2cfffff: excluding 0xf0400000-0xf1d9ffff 0xf2a70000-0xf2cfffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6970000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.36-rc4+ ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf6950000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.36-rc4+ ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
driver u132_hcd built at 11:47:57 on Sep 18 2010
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
driver ftdi-elan built at 11:47:58 on Sep 18 2010
usbcore: registered new interface driver ftdi-elan
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io  0x7000-0x701f] conflicts with ACPI region SMBI [mem 0x00007000-0x0000700f 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lirc_dev: IR Remote Control driver registered, major 249 
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
coretemp coretemp.0: TjMax is 105 C.
coretemp coretemp.1: TjMax is 105 C.
lis3lv02d driver loaded.
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:00.1: SDHCI controller found [1180:e822] (rev 3)
sdhci-pci 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
mmc0: Unknown controller version (2). You may experience problems.
sdhci-pci 0000:03:00.1: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
ioatdma: Intel(R) QuickData Technology Driver 4.00
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell WMI hotkeys as /devices/virtual/input/input6
intel ips 0000:00:1f.6: Warning: CPU TDP doesn't match expected value (found 25, expected 35)
intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 65535
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.1: new high speed USB device using ehci_hcd and address 3
usb 1-1.1: New USB device found, idVendor=413c, idProduct=2513
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 3 ports detected
usb 1-1.2: new high speed USB device using ehci_hcd and address 4
usb 1-1.2: New USB device found, idVendor=413c, idProduct=2513
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 3 ports detected
usb 1-1.4: new high speed USB device using ehci_hcd and address 5
usb 1-1.4: New USB device found, idVendor=05ca, idProduct=1814
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_3M
usb 1-1.4: Manufacturer: CN06YWTK7248707F09M1
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814)
input: Laptop_Integrated_Webcam_3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
usb 2-1.3: new full speed USB device using ehci_hcd and address 3
usb 2-1.3: New USB device found, idVendor=0c4b, idProduct=0300
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: cyberJack pinpad(a)
usb 2-1.3: Manufacturer: Reiner-SCT
usb 2-1.3: SerialNumber: 2362361144
usb 2-1.7: new full speed USB device using ehci_hcd and address 4
usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.7: Product: DW375 Bluetooth Module
usb 2-1.7: Manufacturer: Dell Computer Corp
usb 2-1.7: SerialNumber: 1C659D01A0F8
usb 2-1.8: new full speed USB device using ehci_hcd and address 5
usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: 5880
usb 2-1.8: Manufacturer: Broadcom Corp
usb 2-1.8: SerialNumber: 0123456789ABCD
usb 2-1.8: config 0 descriptor??
usb 1-1.1.1: new full speed USB device using ehci_hcd and address 6
usb 1-1.1.1: New USB device found, idVendor=041e, idProduct=3040
usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.1: Product: SB Live! 24-bit External
usb 1-1.1.1: Manufacturer: Creative Technology
input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
  #0: HDA Intel at 0xf6960000 irq 22
  #1: Creative Technology SB Live! 24-bit External at usb-0000:00:1a.0-1.1.1, full sp
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.2
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2010-09-20 13:16:38 UTC (1284988598)
Initalizing network drop monitor service
UDF-fs: No partition found (1)
device label root devid 1 transid 95451 /dev/root
Btrfs detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) readonly on device 0:12.
Freeing unused kernel memory: 588k freed
udev: starting version 151
udevd (1520): /proc/1520/oom_adj is deprecated, please use /proc/1520/oom_score_adj instead.
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
phy0: Selected rate control algorithm 'iwl-agn-rs'
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:f7:9d:4c
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 2041ff-0ff
Adding 979960k swap on /dev/sdb3.  Priority:-1 extents:1 across:979960k SS
intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready