Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.21-166.fc12.i686.PAE (mockbuild@x86-01.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Fri Aug 27 06:33:34 UTC 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7ec0000 (usable) BIOS-e820: 00000000b7ec0000 - 00000000b7ed8000 (ACPI data) BIOS-e820: 00000000b7ed8000 - 00000000b7eda000 (ACPI NVS) BIOS-e820: 00000000b7eda000 - 00000000c8000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000138000000 (usable) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x138000 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E3FFF uncachable E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 base 00B8000000 mask FFFC000000 write-back 5 base 00BC000000 mask FFFE000000 write-back 6 disabled 7 disabled TOM2: 0000000138000000 aka 4992M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved) initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-00000000375fe000 NX (Execute Disable) protection: active 0000000000 - 0000200000 page 4k 0000200000 - 0037400000 page 2M 0037400000 - 00375fe000 page 4k kernel direct mapping tables up to 375fe000 @ 10000-18000 RAMDISK: 374d4000 - 37fefa50 Allocated new RAMDISK: 00b6b000 - 01686a50 Move RAMDISK from 00000000374d4000 - 0000000037fefa4f to 00b6b000 - 01686a4f ACPI: RSDP 000f8120 00024 (v02 PTLTD ) ACPI: XSDT b7ecc915 00054 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000) ACPI: FACP b7ed799c 000F4 (v03 AMD ANT 06040000 ATI 000F4240) ACPI: DSDT b7ecc969 0B033 (v01 ATI SB700 06040000 MSFT 03000001) ACPI: FACS b7ed9fc0 00040 ACPI: SLIC b7ed7b04 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001) ACPI: SSDT b7ed7c7a 002B4 (v01 PTLTD POWERNOW 06040000 LTP 00000001) ACPI: APIC b7ed7f2e 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: MCFG b7ed7f8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: HPET b7ed7fc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: Local APIC address 0xfee00000 4106MB HIGHMEM available. 885MB LOWMEM available. mapped low ram: 0 - 375fe000 low ram: 0 - 375fe000 node 0 low ram: 00000000 - 375fe000 node 0 bootmap 00014000 - 0001aec0 (9 early reservations) ==> bootmem [0000000000 - 00375fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000b61c38] TEXT DATA BSS ==> [0000400000 - 0000b61c38] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000b62000 - 0000b6a1a0] BRK ==> [0000b62000 - 0000b6a1a0] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #7 [0000b6b000 - 0001686a50] NEW RAMDISK ==> [0000b6b000 - 0001686a50] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000] found SMP MP-table at [c00f8270] f8270 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000375fe HighMem 0x000375fe -> 0x00138000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x000b7ec0 0: 0x00100000 -> 0x00138000 On node 0 totalpages: 982605 free_area_init_node: node 0, pgdat c09d8aa0, node_mem_map c1688200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3949 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 8213 pages used for memmap HighMem zone: 747693 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x43538301 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 Allocating PCI resources starting at c8000000 (gap: c8000000:18000000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 15 pages/cpu @c3e00000 s37848 r0 d23592 u1048576 pcpu-alloc: s37848 r0 d23592 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 972620 Kernel command line: ro root=/dev/mapper/vg_gateway-lv_root rhgb quiet pmp=0 SYSFONT=latarcyrheb-sun16 LANG=es_ES.UTF-8 KEYTABLE=es radeon.modeset=1 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 25558720 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000375fe:00138000) Memory: 3844648k/5111808k available (3762k kernel code, 84884k reserved, 2353k data, 564k init, 3023624k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc09fa000 - 0xc0a87000 ( 564 kB) .data : 0xc07aca74 - 0xc09f9158 (2353 kB) .text : 0xc0400000 - 0xc07aca74 (3762 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2100.091 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.18 BogoMIPS (lpj=2100091) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 22772 entries in 45 pages Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 96431133 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (8390.14 BogoMIPS). sizeof(vma)=92 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=508 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3252 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 devtmpfs: initialized regulator: core version 0.5 Time: 3:56:18 Date: 10/20/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 14 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: OEMN b7ed8bd2 0020A (v01 AMD NAHP 00000001 MSFT 03000001) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0x8420-0x8427] pci 0000:00:11.0: reg 14 io port: [0x8414-0x8417] pci 0000:00:11.0: reg 18 io port: [0x8418-0x841f] pci 0000:00:11.0: reg 1c io port: [0x8410-0x8413] pci 0000:00:11.0: reg 20 io port: [0x8400-0x840f] pci 0000:00:11.0: reg 24 32bit mmio: [0xf0207000-0xf02073ff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10 32bit mmio: [0xf0004000-0xf0004fff] pci 0000:00:12.1: reg 10 32bit mmio: [0xf0005000-0xf0005fff] pci 0000:00:12.2: reg 10 32bit mmio: [0xf0207400-0xf02074ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xf0006000-0xf0006fff] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0207800-0xf02078ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.2: reg 10 64bit mmio: [0xf0000000-0xf0003fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xcfdf0000-0xcfdfffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xcfe00000-0xcfefffff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: reg 10 32bit mmio: [0xcfdec000-0xcfdeffff] pci 0000:01:05.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xcfd00000-0xcfefffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0300000-0xf030ffff] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:04.0: bridge 32bit mmio: [0xf0300000-0xf03fffff] pci 0000:09:00.0: reg 10 64bit mmio: [0xf0400000-0xf040ffff] pci 0000:09:00.0: supports D1 pci 0000:09:00.0: PME# supported from D0 D1 D3hot pci 0000:09:00.0: PME# disabled pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:06.0: bridge 32bit mmio: [0xf0400000-0xf04fffff] pci 0000:00:07.0: bridge io port: [0x00-0xfff] pci 0000:00:07.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:07.0: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0x00-0xfff] pci 0000:00:14.4: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:14.4: bridge 32bit mmio pref: [0x000000-0x0fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:07.0: BAR 13: can't allocate resource pci 0000:00:07.0: BAR 14: can't allocate resource pci 0000:00:07.0: BAR 15: can't allocate resource pci 0000:00:14.4: BAR 13: can't allocate resource pci 0000:00:14.4: BAR 14: can't allocate resource pci 0000:00:14.4: BAR 15: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved system 00:06: ioport range 0x220-0x22f has been reserved system 00:06: ioport range 0x40b-0x40b has been reserved system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0x4d6-0x4d6 has been reserved system 00:06: ioport range 0x530-0x537 has been reserved system 00:06: ioport range 0xc00-0xc01 has been reserved system 00:06: ioport range 0xc14-0xc14 has been reserved system 00:06: ioport range 0xc50-0xc52 has been reserved system 00:06: ioport range 0xc6c-0xc6c has been reserved system 00:06: ioport range 0xc6f-0xc6f has been reserved system 00:06: ioport range 0xcd0-0xcd1 has been reserved system 00:06: ioport range 0xcd2-0xcd3 has been reserved system 00:06: ioport range 0xcd4-0xcd5 has been reserved system 00:06: ioport range 0xcd6-0xcd7 has been reserved system 00:06: ioport range 0xcd8-0xcdf has been reserved system 00:06: ioport range 0x8000-0x805f has been reserved system 00:06: ioport range 0xf40-0xf47 has been reserved system 00:06: ioport range 0x87f-0x87f has been reserved system 00:06: iomem range 0xff800000-0xffefffff has been reserved system 00:06: iomem range 0xfec10000-0xfec1001f has been reserved system 00:07: iomem range 0xe0000-0xfffff could not be reserved system 00:07: iomem range 0xfff00000-0xffffffff has been reserved system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xcfd00000-0xcfefffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:03 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: 0xf0300000-0xf03fffff pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:09 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: 0xf0400000-0xf04fffff pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:0c pci 0000:00:07.0: IO window: 0x1000-0x1fff pci 0000:00:07.0: MEM window: 0xc8000000-0xc81fffff pci 0000:00:07.0: PREFETCH window: 0x000000c8200000-0x000000c83fffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:0f pci 0000:00:14.4: IO window: disabled pci 0000:00:14.4: MEM window: disabled pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: enabling device (0000 -> 0003) pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:07.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xcfd00000-0xcfefffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 1 mem: [0xf0300000-0xf03fffff] pci_bus 0000:09: resource 1 mem: [0xf0400000-0xf04fffff] pci_bus 0000:0c: resource 0 io: [0x1000-0x1fff] pci_bus 0000:0c: resource 1 mem: [0xc8000000-0xc81fffff] pci_bus 0000:0c: resource 2 pref mem [0xc8200000-0xc83fffff] pci_bus 0000:0f: resource 0 mem: [0x0-0xfff] pci_bus 0000:0f: resource 1 mem: [0x0-0xfffff] pci_bus 0000:0f: resource 2 mem: [0x0-0xfffff] pci_bus 0000:0f: resource 3 io: [0x00-0xffff] pci_bus 0000:0f: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11374k freed apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1287546978.564:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1627 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 25 for MSI/MSI-X pcieport 0000:00:04.0: setting latency timer to 64 pcieport 0000:00:06.0: irq 26 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pcieport 0000:00:07.0: irq 27 for MSI/MSI-X pcieport 0000:00:07.0: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Firmware did not grant requested _OSC control Firmware did not grant requested _OSC control pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [ADP1] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZS0] (86 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZS1] (79 C) isapnp: Scanning for PnP cards... ACPI: Battery Slot [BAT0] (battery present) isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207280 irq 22 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0207400 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0207800 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0004000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0005000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0006000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.21-166.fc12.i686.PAE ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 14:732:917 rtc_cmos 00:04: setting system clock to 2010-10-20 03:56:19 UTC (1287546979) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) usb 2-5: new high speed USB device using ehci_hcd and address 2 ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying usb 2-5: New USB device found, idVendor=064e, idProduct=a103 usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-5: Product: Video WebCam usb 2-5: Manufacturer: SuYin usb 2-5: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00 usb 2-5: configuration #1 chosen from 1 choice ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: ST9320320AS, 0303, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9320320AS 0303 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata2.00: ATAPI: HL-DT-ST DVDRAM GT20N, CP02, max UDMA/133 ata2.00: configured for UDMA/133 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CP02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda1 sda2 sda3 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 564k freed Write protecting the kernel text: 3764k Write protecting the kernel read-only data: 1768k dracut: dracut-005-2.fc12 udev: starting version 145 [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xCFDF0000 [drm] register mmio size: 65536 ATOM BIOS: Acer_SJV50PU [drm] Clocks initialized ! [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 416926 kiB. [TTM] Zone highmem: Available graphics memory: 1928738 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RS780 Microcode platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [drm] ring test succeeded in 0 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support [drm] Radeon Display Connectors [drm] Connector 0: [drm] LVDS [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] LCD1: INTERNAL_KLDSCP_LVTMA [drm] Connector 1: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 2: [drm] HDMI-A [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] fb mappable at 0xD0141000 [drm] vram apper at 0xD0000000 [drm] size 4325376 [drm] fb depth is 24 [drm] pitch is 5632 fbcon: radeondrmfb (fb0) is primary device Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6 Console: switching to colour frame buffer device 170x48 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 dracut: Starting plymouth daemon acpi device:25: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input7 ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) dracut: Scanning devices sda2 for LVM volume groups dracut: Couldn't find device with uuid c3okcy-QNBu-MFUy-ttgW-YQFX-8uIv-yABzNE. dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_gateway" using metadata type lvm2 dracut: Couldn't find device with uuid c3okcy-QNBu-MFUy-ttgW-YQFX-8uIv-yABzNE. dracut: 2 logical volume(s) in volume group "vg_gateway" now active EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_gateway-lv_root dracut: Loading SELinux policy SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1287546983.294:2): selinux=0 auid=4294967295 ses=4294967295 dracut: /sbin/load_policy: no se puede cargar la política: No existe el fichero o el directorio dracut: Switching root udev: starting version 145 ACPI: WMI: Mapper loaded tg3.c:v3.102 (September 1, 2009) tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:03:00.0: setting latency timer to 64 Linux video capture interface: v2.00 eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:1f:16:a8:a9:c1 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] acer-wmi: Acer Laptop ACPI-WMI Extras acer-wmi: Brightness must be controlled by generic video driver piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0 uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103) uvcvideo: Forcing device quirks 0x2 by module parameter for testing purpose. uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. input: Video WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath9k 0000:09:00.0: setting latency timer to 64 input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:05.1: setting latency timer to 64 ath: EEPROM regdomain: 0x60 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x60 phy0: Selected rate control algorithm 'ath9k_rate_control' Registered led device: ath9k-phy0::radio Registered led device: ath9k-phy0::assoc Registered led device: ath9k-phy0::tx Registered led device: ath9k-phy0::rx phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8ae0000, irq=18 cfg80211: Calling CRDA for country: CL cfg80211: Regulatory domain changed to country: CL (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance vboxdrv: counter framework which can generate NMIs is active. You have to prevent vboxdrv: the usage of hardware performance counters by vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid vboxdrv: Found 2 processor cores. vboxdrv: fAsync=1 offMin=0x5bf0b49 offMax=0x5bf0b49 vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001). device-mapper: multipath: version 1.1.0 loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 5636785 EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 5636568 EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 5641046 EXT4-fs (sda5): 3 orphan inodes deleted EXT4-fs (sda5): recovery complete EXT4-fs (sda5): mounted filesystem with ordered data mode Adding 5029880k swap on /dev/mapper/vg_gateway-lv_swap. Priority:-1 extents:1 across:5029880k powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-64 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2100 MHz) powernow-k8: 1 : pstate 1 (1050 MHz) RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. tg3 0000:03:00.0: irq 28 for MSI/MSI-X hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. fuse init (API version 7.13) wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1) wlan0: authenticated wlan0: associate with AP 00:25:12:c2:f8:20 (try 1) wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1) wlan0: associated tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. tg3: eth0: Link is down. wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) ath9k: Two wiphys trying to scan at the same time wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1) wlan0: authenticated wlan0: associate with AP 00:25:12:c2:f8:20 (try 1) wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1) wlan0: associated tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1) wlan0: authenticated wlan0: associate with AP 00:25:12:c2:f8:20 (try 1) wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) ath9k: Two wiphys trying to scan at the same time wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1) wlan0: authenticated wlan0: associate with AP 00:25:12:c2:f8:20 (try 1) wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1) wlan0: associated process `skype' is using obsolete setsockopt SO_BSDCOMPAT tg3: eth0: Link is down. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. tg3: eth0: Link is down. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. tg3: eth0: Link is down. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. tg3: eth0: Link is down. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3) wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1) wlan0: authenticated wlan0: associate with AP 00:27:19:dc:33:5e (try 1) wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1) wlan0: associated padlock: VIA PadLock not detected. tg3: eth0: Link is down. No probe response from AP 00:27:19:dc:33:5e after 500ms, disconnecting. wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1) wlan0: authenticated wlan0: associate with AP 00:25:12:c2:f8:20 (try 1) wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1) wlan0: associated atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. tg3 0000:03:00.0: PME# enabled wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ath9k 0000:09:00.0: PCI INT A disabled HDA Intel 0000:01:05.1: PCI INT B disabled ACPI handle has no context! radeon 0000:01:05.0: PCI INT A disabled HDA Intel 0000:00:14.2: PCI INT A disabled HDA Intel 0000:00:14.2: power state changed by ACPI to D3 ehci_hcd 0000:00:13.2: PCI INT B disabled ohci_hcd 0000:00:13.0: PCI INT A disabled ehci_hcd 0000:00:12.2: PCI INT B disabled ohci_hcd 0000:00:12.1: PCI INT A disabled ohci_hcd 0000:00:12.0: PCI INT A disabled ahci 0000:00:11.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. Breaking affinity for irq 1 Breaking affinity for irq 12 Breaking affinity for irq 18 CPU 1 is now offline SMP alternatives: switching to UP code Back to C! Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01 CPU0 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xdff1d001) pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1) pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1) pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100407) ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) ahci 0000:00:11.0: set SATA to AHCI mode ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) pci 0000:00:14.4: restoring config space at offset 0x9 (was 0x0, writing 0xfff0) pci 0000:00:14.4: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) pci 0000:00:14.4: restoring config space at offset 0x7 (was 0x2800000, writing 0x228000f0) pci 0000:00:14.4: restoring config space at offset 0x1 (was 0x2a00000, writing 0x2a00004) HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xcfdec000) HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008) HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100003) tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) ath9k 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) ath9k 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004) ath9k 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) ath9k 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] Clocks initialized ! [drm] ring test succeeded in 0 usecs [drm] ib test succeeded in 0 usecs [drm] Enabling audio support ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/133 HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:05.1: setting latency timer to 64 ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sd 0:0:0:0: [sda] Starting disk ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 PM: Finishing wakeup. Restarting tasks ... done. tg3 0000:03:00.0: PME# disabled tg3 0000:03:00.0: irq 28 for MSI/MSI-X ath9k: Two wiphys trying to scan at the same time tg3 0000:03:00.0: PME# enabled tg3 0000:03:00.0: PME# disabled tg3 0000:03:00.0: irq 28 for MSI/MSI-X warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ath9k 0000:09:00.0: PCI INT A disabled tg3 0000:03:00.0: PME# enabled HDA Intel 0000:01:05.1: PCI INT B disabled ACPI handle has no context! radeon 0000:01:05.0: f6007900 unpin not necessary radeon 0000:01:05.0: PCI INT A disabled HDA Intel 0000:00:14.2: PCI INT A disabled HDA Intel 0000:00:14.2: power state changed by ACPI to D3 ehci_hcd 0000:00:13.2: PCI INT B disabled ohci_hcd 0000:00:13.0: PCI INT A disabled ehci_hcd 0000:00:12.2: PCI INT B disabled ohci_hcd 0000:00:12.1: PCI INT A disabled ohci_hcd 0000:00:12.0: PCI INT A disabled ahci 0000:00:11.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU 1 is now offline SMP alternatives: switching to UP code Back to C! Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01 CPU0 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xdff1d001) pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100407) ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) ahci 0000:00:11.0: set SATA to AHCI mode ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) pci 0000:00:14.4: restoring config space at offset 0x9 (was 0x0, writing 0xfff0) pci 0000:00:14.4: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) pci 0000:00:14.4: restoring config space at offset 0x7 (was 0x2800000, writing 0x28000f0) pci 0000:00:14.4: restoring config space at offset 0x1 (was 0x2a00000, writing 0x2a00004) HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xcfdec000) HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008) HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100003) tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) ath9k 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) ath9k 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004) ath9k 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) ath9k 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] Clocks initialized ! [drm] ring test succeeded in 0 usecs [drm] ib test succeeded in 0 usecs [drm] Enabling audio support ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/133 HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:05.1: setting latency timer to 64 tg3 0000:03:00.0: PME# disabled ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sd 0:0:0:0: [sda] Starting disk ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 PM: Finishing wakeup. Restarting tasks ... done. wlan0: deauthenticating from 00:25:12:c2:f8:20 by local choice (reason=3) wlan0: direct probe to AP 00:25:12:c2:f8:20 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:25:12:c2:f8:20 (try 1) wlan0: authenticated wlan0: associate with AP 00:25:12:c2:f8:20 (try 1) wlan0: RX AssocResp from 00:25:12:c2:f8:20 (capab=0x411 status=0 aid=1) wlan0: associated usb 2-5: reset high speed USB device using ehci_hcd and address 2 usb 3-1: new full speed USB device using ohci_hcd and address 2 usb 3-1: device not accepting address 2, error -62 usb 3-1: new full speed USB device using ohci_hcd and address 3 usb 3-1: device descriptor read/64, error -62 usb 3-1: device descriptor read/64, error -62 usb 3-1: new full speed USB device using ohci_hcd and address 4 usb 3-1: device not accepting address 4, error -62 usb 3-1: new full speed USB device using ohci_hcd and address 5 usb 3-1: device not accepting address 5, error -62 hub 3-0:1.0: unable to enumerate USB device on port 1 usb 2-1: new high speed USB device using ehci_hcd and address 3 usb 2-1: device not accepting address 3, error -71 usb 5-1: new full speed USB device using ohci_hcd and address 2 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 3 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 4 usb 5-1: device not accepting address 4, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 5 usb 5-1: device not accepting address 5, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usb 5-1: new full speed USB device using ohci_hcd and address 6 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 7 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 8 usb 5-1: device not accepting address 8, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 9 usb 5-1: device not accepting address 9, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usb 5-1: new full speed USB device using ohci_hcd and address 10 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 11 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 12 usb 5-1: device not accepting address 12, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 13 usb 5-1: device not accepting address 13, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usb 2-2: new high speed USB device using ehci_hcd and address 5 usb 2-2: New USB device found, idVendor=152d, idProduct=2338 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 usb 2-2: Product: USB to ATA/ATAPI Bridge usb 2-2: Manufacturer: JMicron usb 2-2: SerialNumber: 152D203380B6 usb 2-2: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using ohci_hcd and address 14 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 5-1: device descriptor read/64, error -62 usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 15 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 16 usb 5-1: device not accepting address 16, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 17 usb 5-1: device not accepting address 17, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usb-storage: device scan complete scsi 4:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 4:0:0:0: [sdb] Attached SCSI disk usb 5-1: new full speed USB device using ohci_hcd and address 18 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 19 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 20 usb 5-1: device not accepting address 20, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 21 usb 5-1: device not accepting address 21, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usb 2-2: USB disconnect, address 5 usb 5-1: new full speed USB device using ohci_hcd and address 22 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 23 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 24 usb 5-1: device not accepting address 24, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 25 usb 5-1: device not accepting address 25, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usb 2-2: new high speed USB device using ehci_hcd and address 6 usb 2-2: New USB device found, idVendor=152d, idProduct=2338 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 usb 2-2: Product: USB to ATA/ATAPI Bridge usb 2-2: Manufacturer: JMicron usb 2-2: SerialNumber: 222256087707 usb 2-2: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 5:0:0:0: Direct-Access ST912082 2AS C PQ: 0 ANSI: 2 CCS sd 5:0:0:0: Attached scsi generic sg2 type 0 sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 38 00 00 sd 5:0:0:0: [sdb] Assuming drive cache: write through sd 5:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sdb2 < sdb5 > sd 5:0:0:0: [sdb] Assuming drive cache: write through sd 5:0:0:0: [sdb] Attached SCSI disk usb 2-2: reset high speed USB device using ehci_hcd and address 6 usb 2-2: reset high speed USB device using ehci_hcd and address 6 usb 2-2: reset high speed USB device using ehci_hcd and address 6 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: reset high speed USB device using ehci_hcd and address 6 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: reset high speed USB device using ehci_hcd and address 6 usb 2-2: device not accepting address 6, error -71 usb 2-2: reset high speed USB device using ehci_hcd and address 6 usb 2-2: device not accepting address 6, error -71 usb 2-2: USB disconnect, address 6 sd 5:0:0:0: Device offlined - not ready after error recovery sd 5:0:0:0: [sdb] Unhandled error code sd 5:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 60 d7 9f 00 00 90 00 end_request: I/O error, dev sdb, sector 6346655 Buffer I/O error on device sdb1, logical block 793324 Buffer I/O error on device sdb1, logical block 793325 Buffer I/O error on device sdb1, logical block 793326 Buffer I/O error on device sdb1, logical block 793327 Buffer I/O error on device sdb1, logical block 793328 Buffer I/O error on device sdb1, logical block 793329 Buffer I/O error on device sdb1, logical block 793330 Buffer I/O error on device sdb1, logical block 793331 Buffer I/O error on device sdb1, logical block 793332 Buffer I/O error on device sdb1, logical block 793333 sd 5:0:0:0: rejecting I/O to offline device sd 5:0:0:0: rejecting I/O to offline device sd 5:0:0:0: rejecting I/O to offline device sd 5:0:0:0: [sdb] Unhandled error code sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 60 d8 37 00 00 68 00 end_request: I/O error, dev sdb, sector 6346807 usb 2-2: new high speed USB device using ehci_hcd and address 7 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new high speed USB device using ehci_hcd and address 8 usb 2-2: device descriptor read/64, error -110 usb 2-2: device descriptor read/64, error -71 usb 2-2: new high speed USB device using ehci_hcd and address 9 usb 2-2: device not accepting address 9, error -71 usb 2-2: new high speed USB device using ehci_hcd and address 10 usb 2-2: device not accepting address 10, error -71 hub 2-0:1.0: unable to enumerate USB device on port 2 usb 5-1: new full speed USB device using ohci_hcd and address 26 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 27 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 28 usb 5-1: device not accepting address 28, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 29 usb 5-1: device not accepting address 29, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 usb 5-2: new full speed USB device using ohci_hcd and address 30 usb 5-2: device descriptor read/64, error -62 usb 5-2: device descriptor read/64, error -62 usb 5-2: new full speed USB device using ohci_hcd and address 31 usb 5-2: device descriptor read/64, error -62 usb 5-2: device descriptor read/64, error -62 usb 5-2: new full speed USB device using ohci_hcd and address 32 usb 5-2: device not accepting address 32, error -62 usb 5-2: new full speed USB device using ohci_hcd and address 33 usb 5-2: device not accepting address 33, error -62 hub 5-0:1.0: unable to enumerate USB device on port 2 usb 5-2: new full speed USB device using ohci_hcd and address 34 usb 5-2: device descriptor read/64, error -62 usb 5-2: device descriptor read/64, error -62 usb 5-2: new full speed USB device using ohci_hcd and address 35 usb 5-2: device descriptor read/64, error -62 usb 5-2: device descriptor read/64, error -62 usb 5-2: new full speed USB device using ohci_hcd and address 36 usb 5-2: device not accepting address 36, error -62 usb 5-2: new full speed USB device using ohci_hcd and address 37 usb 5-2: device not accepting address 37, error -62 hub 5-0:1.0: unable to enumerate USB device on port 2 usb 2-2: new high speed USB device using ehci_hcd and address 11 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new high speed USB device using ehci_hcd and address 12 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new high speed USB device using ehci_hcd and address 13 usb 2-2: device not accepting address 13, error -71 hub 2-0:1.0: unable to enumerate USB device on port 2 usb 2-2: new high speed USB device using ehci_hcd and address 15 usb 2-2: New USB device found, idVendor=152d, idProduct=2338 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 usb 2-2: Product: USB to ATA/ATAPI Bridge usb 2-2: Manufacturer: JMicron usb 2-2: SerialNumber: 222256087707 usb 2-2: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 15 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access ST912082 2AS C PQ: 0 ANSI: 2 CCS sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sdb2 < sdb5 > sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Attached SCSI disk usb 2-2: USB disconnect, address 15 No probe response from AP 00:25:12:c2:f8:20 after 500ms, disconnecting. wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1) wlan0: authenticated wlan0: associate with AP 00:27:19:dc:33:5e (try 1) wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3) wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3) wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1) wlan0: authenticated wlan0: associate with AP 00:27:19:dc:33:5e (try 1) wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated from 00:27:19:dc:33:5e (Reason: 2) wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1) wlan0: direct probe to AP 00:27:19:dc:33:5e (try 2) wlan0: direct probe to AP 00:27:19:dc:33:5e (try 3) wlan0: direct probe responded wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1) wlan0: authenticated wlan0: associate with AP 00:27:19:dc:33:5e (try 1) wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1) wlan0: associated atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 ' to make it known. tg3 0000:03:00.0: PME# enabled wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3) PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ath9k 0000:09:00.0: PCI INT A disabled HDA Intel 0000:01:05.1: PCI INT B disabled ACPI handle has no context! hrtimer: interrupt took 3097573 ns radeon 0000:01:05.0: f6007900 unpin not necessary radeon 0000:01:05.0: PCI INT A disabled HDA Intel 0000:00:14.2: PCI INT A disabled HDA Intel 0000:00:14.2: power state changed by ACPI to D3 ehci_hcd 0000:00:13.2: PCI INT B disabled ohci_hcd 0000:00:13.0: PCI INT A disabled ehci_hcd 0000:00:12.2: PCI INT B disabled ohci_hcd 0000:00:12.1: PCI INT A disabled ohci_hcd 0000:00:12.0: PCI INT A disabled ahci 0000:00:11.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU 1 is now offline SMP alternatives: switching to UP code Back to C! Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01 CPU0 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xdff1d001) pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100407) ahci 0000:00:11.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) ahci 0000:00:11.0: set SATA to AHCI mode ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013) ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) pci 0000:00:14.4: restoring config space at offset 0x9 (was 0x0, writing 0xfff0) pci 0000:00:14.4: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) pci 0000:00:14.4: restoring config space at offset 0x7 (was 0x2800000, writing 0x28000f0) pci 0000:00:14.4: restoring config space at offset 0x1 (was 0x2a00000, writing 0x2a00004) HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xcfdec000) HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008) HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100003) tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) ath9k 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) ath9k 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004) ath9k 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) ath9k 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] Clocks initialized ! [drm] ring test succeeded in 0 usecs [drm] ib test succeeded in 0 usecs [drm] Enabling audio support ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/133 HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:05.1: setting latency timer to 64 ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sd 0:0:0:0: [sda] Starting disk ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 PM: Finishing wakeup. Restarting tasks ... done. tg3 0000:03:00.0: PME# disabled tg3 0000:03:00.0: irq 28 for MSI/MSI-X ath9k: Two wiphys trying to scan at the same time wlan0: deauthenticating from 00:27:19:dc:33:5e by local choice (reason=3) wlan0: direct probe to AP 00:27:19:dc:33:5e (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:27:19:dc:33:5e (try 1) wlan0: authenticated wlan0: associate with AP 00:27:19:dc:33:5e (try 1) wlan0: RX AssocResp from 00:27:19:dc:33:5e (capab=0x411 status=0 aid=1) wlan0: associated usb 2-2: new high speed USB device using ehci_hcd and address 16 usb 2-2: New USB device found, idVendor=0cf3, idProduct=9271 usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48 usb 2-2: Product: USB2.0 WLAN usb 2-2: Manufacturer: ATHEROS usb 2-2: SerialNumber: 12345 usb 2-2: configuration #1 chosen from 1 choice usb 2-5: reset high speed USB device using ehci_hcd and address 2 usb 2-2: USB disconnect, address 16