Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.36-nuvo+ (guest@slax) (gcc version 4.4.4 (GCC) ) #17 SMP Mon Nov 1 17:15:51 GMT 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x2fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 020000000 mask FF0000000 write-back 2 disabled 3 disabled 4 disabled 5 base 0E0000000 mask FFC000000 write-combining 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 found SMP MP-table at [c00fb920] fb920 init_memory_mapping: 0000000000000000-000000002fff0000 0000000000 - 0000400000 page 4k 0000400000 - 002fc00000 page 2M 002fc00000 - 002fff0000 page 4k kernel direct mapping tables up to 2fff0000 @ 15000-1a000 ACPI: RSDP 000fa940 00014 (v00 AMI ) ACPI: RSDT 2fff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097) ACPI: FACP 2fff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097) ACPI: DSDT 2fff0120 02F53 (v01 VIA VIA_K7 00001000 MSFT 0100000D) ACPI: FACS 2fff8000 00040 ACPI: APIC 2fff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 767MB LOWMEM available. mapped low ram: 0 - 2fff0000 low ram: 0 - 2fff0000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0002fff0 HighMem empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0002fff0 On node 0 totalpages: 196479 free_area_init_node: node 0, pgdat c138ec80, node_mem_map c14a7200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1504 pages used for memmap Normal zone: 190992 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [16000 - 167ff] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 15 pages/cpu @c1c00000 s37888 r0 d23552 u4194304 pcpu-alloc: s37888 r0 d23552 u4194304 alloc=1*4194304 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194943 Kernel command line: BOOT_IMAGE=2.6.36-nuvo ro root=1601 nocd nopcmcia max_loop=255 nohotplug vt.default_utf8=0 video=VGA-1:800x600-16@85 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Initializing CPU#0 allocated 3931520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Subtract (44 early reservations) #1 [0000001000 - 0000002000] EX TRAMPOLINE #2 [0001000000 - 000149e3ec] TEXT DATA BSS #3 [000149f000 - 00014a5108] BRK #4 [00000fb930 - 0000100000] BIOS reserved #5 [00000fb920 - 00000fb930] MP-table mpf #6 [000009fc00 - 00000f66b0] BIOS reserved #7 [00000f67e0 - 00000fb920] BIOS reserved #8 [00000f66b0 - 00000f67e0] MP-table mpc #9 [0000010000 - 0000011000] TRAMPOLINE #10 [0000011000 - 0000015000] ACPI WAKEUP #11 [0000015000 - 0000016000] PGTABLE #12 [00014a6000 - 00014a7000] BOOTMEM #13 [00014a7000 - 0001aa7000] BOOTMEM #14 [000149e400 - 000149e404] BOOTMEM #15 [000149e440 - 000149e500] BOOTMEM #16 [000149e500 - 000149e548] BOOTMEM #17 [0001aa7000 - 0001aaa000] BOOTMEM #18 [000149e580 - 000149e5a7] BOOTMEM #19 [000149e5c0 - 000149e6f4] BOOTMEM #20 [000149e700 - 000149e740] BOOTMEM #21 [000149e740 - 000149e780] BOOTMEM #22 [000149e780 - 000149e7c0] BOOTMEM #23 [000149e7c0 - 000149e800] BOOTMEM #24 [000149e800 - 000149e840] BOOTMEM #25 [000149e840 - 000149e880] BOOTMEM #26 [000149e880 - 000149e8c0] BOOTMEM #27 [000149e8c0 - 000149e900] BOOTMEM #28 [000149e900 - 000149e940] BOOTMEM #29 [000149e940 - 000149e980] BOOTMEM #30 [000149e980 - 000149e990] BOOTMEM #31 [000149e9c0 - 000149ea35] BOOTMEM #32 [000149ea40 - 000149eab5] BOOTMEM #33 [0001c00000 - 0001c0f000] BOOTMEM #34 [000149eac0 - 000149eac4] BOOTMEM #35 [000149eb00 - 000149eb04] BOOTMEM #36 [000149eb40 - 000149eb44] BOOTMEM #37 [000149eb80 - 000149eb84] BOOTMEM #38 [000149ebc0 - 000149ec70] BOOTMEM #39 [000149ec80 - 000149ed28] BOOTMEM #40 [0001aaa000 - 0001aae000] BOOTMEM #41 [0001aae000 - 0001b2e000] BOOTMEM #42 [0001b2e000 - 0001b6e000] BOOTMEM #43 [0001c0f000 - 0001fced80] BOOTMEM Initializing HighMem for node 0 (00000000:00000000) Memory: 770288k/786368k available (2483k kernel code, 15628k reserved, 1193k data, 428k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf07f0000 - 0xff7fe000 ( 240 MB) lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) .init : 0xc1398000 - 0xc1403000 ( 428 kB) .data : 0xc126ce20 - 0xc13975b8 (1193 kB) .text : 0xc1000000 - 0xc126ce20 (2483 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:512 CPU 0 irqstacks, hard=c1c00000 soft=c1c01000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 950.033 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 1900.06 BogoMIPS (lpj=3800132) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys freezer mce: CPU supports 4 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20100702 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 14219 entries in 28 pages Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Duron(tm) Processor stepping 01 Brought up 1 CPUs Total of 1 processors activated (1900.06 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xffdfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored) pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref] pci 0000:00:01.0: supports D1 pci 0000:00:05.0: reg 10: [io 0xec00-0xecff] pci 0000:00:05.0: reg 14: [mem 0xdfffff00-0xdfffffff] pci 0000:00:05.0: reg 30: [mem 0xdffe0000-0xdffeffff pref] pci 0000:00:05.0: supports D1 D2 pci 0000:00:05.0: PME# supported from D1 D2 D3hot pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: reg 20: [io 0xe400-0xe41f] pci 0000:00:06.1: reg 20: [io 0xe800-0xe81f] pci 0000:00:06.2: reg 10: [mem 0xdffffe00-0xdffffeff] pci 0000:00:06.2: PME# supported from D0 D3hot pci 0000:00:06.2: PME# disabled pci 0000:00:08.0: reg 10: [mem 0xdffff800-0xdffffbff] pci 0000:00:08.0: supports D1 D2 pci 0000:00:11.1: reg 20: [io 0xfc00-0xfc0f] pci 0000:00:11.2: reg 20: [io 0xd800-0xd81f] pci 0000:00:11.3: reg 20: [io 0xdc00-0xdc1f] pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 10: [mem 0xde000000-0xdeffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref] pci 0000:01:00.0: reg 18: [mem 0xddc80000-0xddcfffff pref] pci 0000:01:00.0: reg 30: [mem 0xdfee0000-0xdfefffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff] pci 0000:00:01.0: bridge window [mem 0xcdb00000-0xddcfffff pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 32 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000002fff0000 - 000000002fffffff Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff] pci 0000:00:01.0: bridge window [mem 0xcdb00000-0xddcfffff pref] pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xdfefffff] pci_bus 0000:01: resource 2 [mem 0xcdb00000-0xddcfffff pref] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 32 audit: initializing netlink socket (disabled) type=2000 audit(1288635840.204:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1504 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:11.1: VIA vt8233a (rev 00) IDE UDMA133 via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) pci 0000:00:11.1: can't derive routing for PCI INT A via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07 ide1: BM-DMA at 0xfc08-0xfc0f Probing IDE interface ide0... hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/66 mode selected Probing IDE interface ide1... hdc: ST3160021A, ATA DISK drive hdd: SAMSUNG SP0802N, ATA DISK drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hdc: max request size: 512KiB hdc: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 hdc6 > hdd: max request size: 512KiB hdd: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63 hdd: cache flushes supported hdd: hdd1 hdd2 hdd3 hdd3: ide-cd driver 5.00 ide-cd: hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 console [netcon0] enabled netconsole: network logging started PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Registering the dns_resolver key type Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (hdc1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 22:1. Freeing unused kernel memory: 428k freed EXT3-fs (hdc1): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (hdc1): using internal journal i2c /dev entries driver ACPI: resource vt596_smbus [io 0x0400-0x0407] conflicts with ACPI region SMOV [??? 0x00000400-0x00000406 flags 0x56] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver w83627hf: Found W83697HF chip at 0x290 Linux video capture interface: v2.00 Linux agpgart interface v0.103 EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (hdc5): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (hdc5): using internal journal EXT3-fs (hdc5): mounted filesystem with writeback data mode SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hdc6 Ending clean XFS mount for filesystem: hdc6 udevd (1139): /proc/1139/oom_adj is deprecated, please use /proc/1139/oom_score_adj instead. agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 8139too 0000:00:05.0: eth0: RealTek RTL8139 at 0xf084ef00, 00:e0:4c:66:01:63, IRQ 16 Floppy drive(s): fd0 is 1.44M IR NEC protocol handler initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 parport_pc 00:04: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] IR RC5(x) protocol handler initialized usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:06.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:06.2: EHCI Host Controller ehci_hcd 0000:00:06.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:06.2: irq 19, io mem 0xdffffe00 ehci_hcd 0000:00:06.2: USB 2.0 started, EHCI 0.95 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.36-nuvo+ ehci_hcd usb usb1: SerialNumber: 0000:00:06.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected gameport gameport0: NS558 PnP Gameport is pnp00:05/gameport0, io 0x208, speed 946kHz IR RC6 protocol handler initialized uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:06.0: UHCI Host Controller uhci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:06.0: irq 17, io base 0x0000e400 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.36-nuvo+ uhci_hcd usb usb2: SerialNumber: 0000:00:06.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:06.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:06.1: UHCI Host Controller uhci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:06.1: irq 18, io base 0x0000e800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.36-nuvo+ uhci_hcd usb usb3: SerialNumber: 0000:00:06.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:11.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:11.2: irq 21, io base 0x0000d800 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.36-nuvo+ uhci_hcd usb usb4: SerialNumber: 0000:00:11.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:11.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:11.3: irq 21, io base 0x0000dc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.36-nuvo+ uhci_hcd usb usb5: SerialNumber: 0000:00:11.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected saa7130/34: v4l2 driver version 0.2.16 loaded saa7134 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 19, latency: 64, mmio: 0xdffff800 saa7130[0]: subsystem: 1461:2115, board: AverMedia AverTV Studio 305 [card=35,autodetected] saa7130[0]: board init: gpio is 10200 IR JVC protocol handler initialized rtc_cmos 00:08: RTC can wake from S4 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram usb 2-2: new low speed USB device using uhci_hcd and address 2 IR Sony protocol handler initialized usb 2-2: New USB device found, idVendor=045e, idProduct=0083 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Basic Optical Mouse usb 2-2: Manufacturer: Microsoft [drm] Initialized drm 1.1.0 20060810 lirc_dev: IR Remote Control driver registered, major 251 ppdev: user-space parallel port driver Registered IR keymap rc-avermedia input: saa7134 IR (AverMedia AverTV St as /devices/pci0000:00/0000:00:08.0/rc/rc0/input4 rc0: saa7134 IR (AverMedia AverTV St as /devices/pci0000:00/0000:00:08.0/rc/rc0 IR LIRC bridge handler initialized FDC 0 is a post-1991 82077 saa7130[0]: i2c eeprom 00: 61 14 15 21 ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff usbcore: registered new interface driver hiddev tuner 0-0043: chip found @ 0x86 (saa7130[0]) input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:06.0/usb2/2-2/2-2:1.0/input/input5 generic-usb 0003:045E:0083.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:06.0-2/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver usbmouse usbmouse: v1.6:USB HID Boot Protocol mouse driver tda9887 0-0043: creating new instance tda9887 0-0043: tda988[5/6/7] found tuner 0-0061: chip found @ 0xc2 (saa7130[0]) nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x017100a5) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BMP BIOS found [drm] nouveau 0000:01:00.0: BMP version 5.21 [drm] nouveau 0000:01:00.0: Bios version 04.17.00.61 [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000100 000088b8 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03010312 00000000 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02020321 00000003 [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD126 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD4A0 tuner-simple 0-0061: creating new instance tuner-simple 0-0061: type set to 51 (Philips PAL/SECAM_D (FM 1256 I-H3)) saa7130[0]: registered device video0 [v4l2] saa7130[0]: registered device vbi0 saa7130[0]: registered device radio0 VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD241 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD9E4 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD3FC [drm] nouveau 0000:01:00.0: 1 available performance level(s) [drm] nouveau 0000:01:00.0: 0: memory 332MHz [drm] nouveau 0000:01:00.0: c: memory 333MHz core 249MHz [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM [TTM] Zone kernel: Available graphics memory: 385366 kiB. [TTM] Initializing pool allocator. agpgart-via 0000:00:00.0: AGP 2.0 bridge agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2) [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ef2dc600 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A Console: switching to colour frame buffer device 160x64 fb0: nouveaufb frame buffer device drm: registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 NET: Registered protocol family 10 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). svc: failed to register lockdv1 RPC service (errno 97). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: unable to find recovery directory /var/lib/nfs/v4recovery NFSD: starting 90-second grace period warning: `squid' uses 32-bit capabilities (legacy support in use) eth0: no IPv6 routers present [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (hdd2): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (hdd2): using internal journal EXT3-fs (hdd2): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (hdd1): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (hdd1): using internal journal EXT3-fs (hdd1): mounted filesystem with writeback data mode