Linux version 2.6.36 (root@rechner1) (gcc version 4.4.5 (Gentoo 4.4.5 p1.0, pie-0.4.5) ) #4 SMP Sun Nov 7 23:49:15 CET 2010 Command line: root=/dev/sda5 usbhid.mousepoll=2 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000098800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable) BIOS-e820: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS) BIOS-e820: 00000000cfcf1000 - 00000000cfd00000 (ACPI data) BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 base 0000CFD00000 mask FFFFFFF00000 uncachable 4 base 0000CFE00000 mask FFFFFFE00000 uncachable 5 base 000100000000 mask FFFFE0000000 write-back 6 base 000120000000 mask FFFFF0000000 write-back 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfcf0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfc00000 page 2M 00cfc00000 - 00cfcf0000 page 4k kernel direct mapping tables up to cfcf0000 @ 8000-b000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ a000-c000 ACPI: RSDP 00000000000f5c40 00014 (v00 GBT ) ACPI: RSDT 00000000cfcf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000cfcf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000cfcf10c0 079C7 (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000cfcf0000 00040 ACPI: SSDT 00000000cfcf8b80 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000cfcf9a80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000cfcf9ac0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: MATS 00000000cfcf9b00 00034 (v01 GBT 00000000 00000000) ACPI: APIC 00000000cfcf8ac0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x00000098 0: 0x00000100 -> 0x000cfcf0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1047687 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3935 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 832808 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 6 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) early_res array is doubled to 64 at [3000 - 37ff] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:6 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880001800000 s77248 r8192 d21056 u262144 pcpu-alloc: s77248 r8192 d21056 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 - - Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030663 Kernel command line: root=/dev/sda5 usbhid.mousepoll=2 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Subtract (50 early reservations) #1 [0001000000 - 0001746018] TEXT DATA BSS #2 [0000098800 - 0000100000] BIOS reserved #3 [0001747000 - 00017470f6] BRK #4 [0000001000 - 0000003000] TRAMPOLINE #5 [0000008000 - 000000a000] PGTABLE #6 [000000a000 - 000000b000] PGTABLE #7 [0001747100 - 0001748100] BOOTMEM #8 [0001746040 - 0001746240] BOOTMEM #9 [0001f49000 - 0005749000] BOOTMEM #10 [0001746240 - 00017463c0] BOOTMEM #11 [0001748100 - 0001760100] BOOTMEM #12 [0001760100 - 0001766100] BOOTMEM #13 [0001767000 - 0001768000] BOOTMEM #14 [00017463c0 - 0001746401] BOOTMEM #15 [0001746440 - 0001746483] BOOTMEM #16 [00017464c0 - 0001746728] BOOTMEM #17 [0001746740 - 00017467a8] BOOTMEM #18 [00017467c0 - 0001746828] BOOTMEM #19 [0001746840 - 00017468a8] BOOTMEM #20 [00017468c0 - 0001746928] BOOTMEM #21 [0001746940 - 00017469a8] BOOTMEM #22 [00017469c0 - 0001746a28] BOOTMEM #23 [0001746a40 - 0001746aa8] BOOTMEM #24 [0001746ac0 - 0001746b28] BOOTMEM #25 [0001746b40 - 0001746ba8] BOOTMEM #26 [0001746bc0 - 0001746c28] BOOTMEM #27 [0001746c40 - 0001746c62] BOOTMEM #28 [0001746c80 - 0001746ca2] BOOTMEM #29 [0001800000 - 000181a000] BOOTMEM #30 [0001840000 - 000185a000] BOOTMEM #31 [0001880000 - 000189a000] BOOTMEM #32 [00018c0000 - 00018da000] BOOTMEM #33 [0001900000 - 000191a000] BOOTMEM #34 [0001940000 - 000195a000] BOOTMEM #35 [0001746cc0 - 0001746cc8] BOOTMEM #36 [0001746d00 - 0001746d08] BOOTMEM #37 [0001746d40 - 0001746d58] BOOTMEM #38 [0001746d80 - 0001746db0] BOOTMEM #39 [0001746dc0 - 0001746ee0] BOOTMEM #40 [0001746f00 - 0001746f48] BOOTMEM #41 [0001746f80 - 0001746fc8] BOOTMEM #42 [0001768000 - 0001770000] BOOTMEM #43 [000195a000 - 0001d5a000] BOOTMEM #44 [0005749000 - 0005949000] BOOTMEM #45 [0020000000 - 0024000000] BOOTMEM #46 [0005949000 - 0009949000] BOOTMEM #47 [0001770000 - 0001790000] BOOTMEM #48 [0001790000 - 00017d0000] BOOTMEM #49 [000000b000 - 0000013000] BOOTMEM Memory: 3987512k/4980736k available (3528k kernel code, 789988k absent, 203236k reserved, 3009k data, 448k init) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:768 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 3315.034 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.50 BogoMIPS (lpj=2812753) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 tseg: 00cfe00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f Freeing SMP alternatives: 16k freed ACPI: Core revision 20100702 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00 Booting Node 0, Processors #1 #2 #3 #4 #5 Ok. Brought up 6 CPUs Total of 6 processors activated (33752.71 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [a000, ffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff] TOM2: 0000000130000000 aka 4864M bus: [00, 05] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x000a0000-0x000bffff] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] bus: 00 index 3 [mem 0xe0600000-0xffffffff] bus: 00 index 4 [mem 0xe0100000-0xe05fffff] bus: 00 index 5 [mem 0x130000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Actual Package length (1) is larger than NumElements field (0), truncated ACPI: Actual Package length (1) is larger than NumElements field (0), truncated ACPI: Actual Package length (1) is larger than NumElements field (0), truncated ACPI: Actual Package length (1) is larger than NumElements field (0), truncated ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff] pci 0000:00:15.0: supports D1 D2 pci 0000:00:15.1: supports D1 D2 pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff] pci 0000:00:16.2: supports D1 D2 pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:16.2: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit] pci 0000:01:00.0: reg 20: [io 0xde00-0xdeff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 10: [mem 0xfd8fe000-0xfd8fffff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:09.0: PCI bridge to [bus 02-02] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff] pci 0000:00:09.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] pci 0000:03:07.0: reg 10: [mem 0xfdeff000-0xfdefffff pref] pci 0000:03:08.0: reg 10: [mem 0xfdfff000-0xfdfff3ff] pci 0000:03:08.0: supports D1 D2 pci 0000:03:0e.0: reg 10: [mem 0xfdffe000-0xfdffe7ff] pci 0000:03:0e.0: reg 14: [mem 0xfdff8000-0xfdffbfff] pci 0000:03:0e.0: supports D1 D2 pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:0e.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) pci 0000:00:15.0: PCI bridge to [bus 04-04] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff] pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] pci 0000:05:00.0: reg 10: [io 0xae00-0xaeff] pci 0000:05:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref] pci 0000:05:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:15.1: PCI bridge to [bus 05-05] pci 0000:00:15.1: bridge window [io 0xa000-0xafff] pci 0000:00:15.1: bridge window [mem 0xfda00000-0xfdafffff] pci 0000:00:15.1: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 0000000000098800 - 000000000009ffff reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp 00:08: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0220-0x0225] has been reserved system 00:01: [io 0x0290-0x0294] has been reserved system 00:02: [io 0x4100-0x411f] has been reserved system 00:02: [io 0x0228-0x022f] has been reserved system 00:02: [io 0x040b] has been reserved system 00:02: [io 0x04d6] has been reserved system 00:02: [io 0x0c00-0x0c01] has been reserved system 00:02: [io 0x0c14] has been reserved system 00:02: [io 0x0c50-0x0c52] has been reserved system 00:02: [io 0x0c6c-0x0c6d] has been reserved system 00:02: [io 0x0c6f] has been reserved system 00:02: [io 0x0cd0-0x0cd1] has been reserved system 00:02: [io 0x0cd2-0x0cd3] has been reserved system 00:02: [io 0x0cd4-0x0cdf] has been reserved system 00:02: [io 0x4000-0x40fe] has been reserved system 00:02: [io 0x4210-0x4217] has been reserved system 00:02: [io 0x0b00-0x0b0f] has been reserved system 00:02: [io 0x0b10-0x0b1f] has been reserved system 00:02: [io 0x0b20-0x0b3f] has been reserved system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved system 00:07: [mem 0xe0000000-0xefffffff] has been reserved system 00:08: [mem 0xcfcf0000-0xcfcfffff] could not be reserved system 00:08: [mem 0xffff0000-0xffffffff] has been reserved system 00:08: [mem 0xcfd00000-0xcfdfffff] has been reserved system 00:08: [mem 0xcfe00000-0xcfefffff] could not be reserved system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref] pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:09.0: PCI bridge to [bus 02-02] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff] pci 0000:00:09.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 03-03] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref] pci 0000:00:15.0: PCI bridge to [bus 04-04] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff] pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref] pci 0000:00:15.1: PCI bridge to [bus 05-05] pci 0000:00:15.1: bridge window [io 0xa000-0xafff] pci 0000:00:15.1: bridge window [mem 0xfda00000-0xfdafffff] pci 0000:00:15.1: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:15.0: setting latency timer to 64 pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:15.1: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff] pci_bus 0000:02: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture msgmni has been set to 7916 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: acpi_idle registered with cpuidle Real Time Clock Driver v1.12b Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using getrawmonotonic(). floppy0: no floppy controllers found ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:11.0: irq 40 for MSI/MSI-X ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 40 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 40 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 40 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 40 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 40 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 40 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: debug port 1 ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 hub 7-0:1.0: USB hub found hub 7-0:1.0: 4 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. Failed to disable AUX port, but continuing anyway... Is this a SiS? If AUX port is really absent please use the 'i8042.noaux' option. ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) usb 1-3: new high speed USB device using ehci_hcd and address 2 scsi6 : usb-storage 1-3:1.0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100 ata3.00: configured for UDMA/100 ata2.00: ATA-8: SAMSUNG HD503HI, 1AJ10001, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01109, max UDMA7 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/133 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD503HI 1AJ1 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg2 type 5 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00) powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2800 MHz) powernow-k8: 1 : pstate 1 (2200 MHz) powernow-k8: 2 : pstate 2 (1500 MHz) powernow-k8: 3 : pstate 3 (800 MHz) sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > sd 1:0:0:0: [sdb] Attached SCSI disk REISERFS (device sda5): found reiserfs format "3.6" with standard journal REISERFS (device sda5): using ordered data mode REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda5): checking transaction log (sda5) REISERFS (device sda5): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:5. Freeing unused kernel memory: 448k freed Write protecting the kernel read-only data: 6144k Freeing unused kernel memory: 548k freed Freeing unused kernel memory: 936k freed usb 4-5: new full speed USB device using ohci_hcd and address 2 usb 5-1: new full speed USB device using ohci_hcd and address 2 scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg3 type 0 scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 6:0:0:1: Attached scsi generic sg4 type 0 sd 6:0:0:0: [sdc] Attached SCSI removable disk scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 6:0:0:2: Attached scsi generic sg5 type 0 sd 6:0:0:1: [sdd] Attached SCSI removable disk scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 6:0:0:3: Attached scsi generic sg6 type 0 sd 6:0:0:2: [sde] Attached SCSI removable disk sd 6:0:0:3: [sdf] Attached SCSI removable disk usb 7-3: new low speed USB device using ohci_hcd and address 2 input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.0/input/input0 cherry 0003:046A:0023.0001: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:16.0-3/input0 input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.1/input/input1 cherry 0003:046A:0023.0002: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:16.0-3/input1 usb 7-4: new full speed USB device using ohci_hcd and address 3 input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.0/input/input2 generic-usb 0003:046D:C049.0003: input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:16.0-4/input0 generic-usb 0003:046D:C049.0004: claimed by neither input, hiddev nor hidraw udev[831]: starting version 164 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:05:00.0: setting latency timer to 64 r8169 0000:05:00.0: irq 41 for MSI/MSI-X r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc9000007e000, 1c:6f:65:46:58:2a, XID 083000c0 IRQ 41 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized Linux video capture interface: v2.00 IR RC6 protocol handler initialized [drm] Initialized drm 1.1.0 20060810 xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 xhci_hcd 0000:02:00.0: setting latency timer to 64 xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd8fe000 xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 8-0:1.0: USB hub found hub 8-0:1.0: 4 ports detected IR JVC protocol handler initialized IR Sony protocol handler initialized saa7130/34: v4l2 driver version 0.2.16 loaded saa7134 0000:03:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 saa7134[0]: found at 0000:03:08.0, rev: 1, irq: 22, latency: 32, mmio: 0xfdfff000 saa7134[0]: subsystem: ffff:ffff, board: Terratec Cinergy 400 TV [card=8,insmod option] saa7134[0]: board init: gpio is 50000 lirc_dev: IR Remote Control driver registered, major 254 Registered IR keymap rc-cinergy input: saa7134 IR (Terratec Cinergy 40 as /devices/pci0000:00/0000:00:14.4/0000:03:08.0/rc/rc0/input3 rc0: saa7134 IR (Terratec Cinergy 40 as /devices/pci0000:00/0000:00:14.4/0000:03:08.0/rc/rc0 IR LIRC bridge handler initialized HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899). [drm] register mmio base: 0xFDDC0000 [drm] register mmio size: 131072 ATOM BIOS: CYPRESS radeon 0000:01:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 256bits DDR saa7134[0]: i2c eeprom 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom b0: ff ff ff [TTM] Zone kernel: Available graphics memory: 2027706 kiB. [TTM] Initializing pool allocator. ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom d0: ff ff [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff radeon 0000:01:00.0: irq 49 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading CYPRESS Microcode hda_codec: ALC892: BIOS auto-probing. TUNER: Unable to find symbol tea5767_autodetection() tuner 0-0060: chip found @ 0xc0 (saa7134[0]) tuner-simple 0-0060: creating new instance tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs failed to evaluate ATIF got AE_BAD_PARAMETER [drm] Radeon Display Connectors [drm] Connector 0: [drm] DisplayPort [drm] HPD4 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] HDMI-A [drm] HPD5 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 3: [drm] DVI-I [drm] HPD6 [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [drm] Encoders: [drm] DFP4: INTERNAL_UNIPHY [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xD0140000 [drm] vram apper at 0xD0000000 [drm] size 9216000 [drm] fb depth is 24 [drm] pitch is 7680 Console: switching to colour frame buffer device 240x67 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0 HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X HDA Intel 0000:01:00.1: setting latency timer to 64 fuse init (API version 7.15) loop: module loaded Mantis 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 DVB: registering new adapter (Mantis DVB adapter) DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... it87: Found IT8720F chip at 0x228, revision 8 it87: Routing internal VCCH to in7 it87: Beeping is supported vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 6 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa02ee020 vboxdrv: fAsync=0 offMin=0x782 offMax=0xe13e vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001). EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with ordered data mode REISERFS (device sda7): found reiserfs format "3.6" with standard journal REISERFS (device sda7): using ordered data mode REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda7): checking transaction log (sda7) REISERFS (device sda7): Using r5 hash to sort names EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with ordered data mode SGI XFS with security attributes, large block/inode numbers, no debug enabled XFS mounting filesystem sda9 Ending clean XFS mount for filesystem: sda9 REISERFS (device sda8): found reiserfs format "3.6" with standard journal REISERFS (device sda8): using ordered data mode REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda8): checking transaction log (sda8) REISERFS (device sda8): Using r5 hash to sort names EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb7): using internal journal EXT3-fs (sdb7): mounted filesystem with ordered data mode FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! r8169 0000:05:00.0: eth0: link up r8169 0000:05:00.0: eth0: link up Adding 5119996k swap on /dev/sdb2. Priority:-1 extents:1 across:5119996k sshd (1984): /proc/1984/oom_adj is deprecated, please use /proc/1984/oom_score_adj instead. ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: configured for UDMA/133 ata2: EH complete ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: configured for UDMA/133 ata2: EH complete sd 6:0:0:0: [sdc] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB) sd 6:0:0:0: [sdc] Assuming drive cache: write through sd 6:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1