[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000) [ 0.000000] Linux version 2.6.37-rc3 (andrey@power-debian) (gcc version 4.4.5 (Debian 4.4.5-6) ) #1 SMP PREEMPT Wed Nov 24 01:31:38 MSK 2010 [ 0.000000] Found initrd at 0xc1b00000:0xc1fc9400 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000 [ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=1392, gen1=1391 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal empty [ 0.000000] HighMem 0x00030000 -> 0x00060000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00060000 [ 0.000000] On node 0 totalpages: 393216 [ 0.000000] free_area_init_node: node 0, pgdat c04c9ae0, node_mem_map c0531000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1536 pages used for memmap [ 0.000000] HighMem zone: 195072 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 7 pages/cpu @c113c000 s8064 r8192 d12416 u32768 [ 0.000000] pcpu-alloc: s8064 r8192 d12416 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144 [ 0.000000] Kernel command line: root=/dev/mapper/power--group-root ro video=offb:off [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 786432k [ 0.000000] Memory: 1544964k/1572864k available (4768k kernel code, 27900k reserved, 188k data, 307k bss, 240k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffbf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfdcda000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfdcda000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:128 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55 [ 0.000000] GMT Delta read from XPRAM: 240 minutes, DST: on [ 0.000000] time_init: decrementer frequency = 33.304558 MHz [ 0.000000] time_init: processor frequency = 866.666664 MHz [ 0.000000] clocksource: timebase mult[781a8ad] shift[22] registered [ 0.000000] clockevent: decrementer mult[886a5c3] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 0.000000] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 0.001279] pid_max: default: 32768 minimum: 301 [ 0.001468] Mount-cache hash table entries: 512 [ 0.002005] device-tree: Duplicate name in /cpus/PowerPC,G4@0/l2-cache, renamed to "l2-cache#1" [ 0.002124] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.002278] device-tree: Duplicate name in /cpus/PowerPC,G4@1/l2-cache, renamed to "l2-cache#1" [ 0.002388] device-tree: Duplicate name in /cpus/PowerPC,G4@1, renamed to "l2-cache#1" [ 0.006754] PowerMac SMP probe found 2 cpus [ 0.006859] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.006888] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.006912] channel 0 bus [ 0.006926] channel 1 bus [ 0.006956] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.006973] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.006996] channel 0 bus [ 0.007015] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.007035] channel 1 bus [ 0.007050] channel 2 bus [ 0.007077] pmf: no parser for command 17 ! [ 0.007145] Processor timebase sync using GPIO 0x73 [ 0.007163] mpic: requesting IPIs... [ 0.007180] irq: irq 251 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 123 [ 0.007195] irq: irq 252 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 124 [ 0.007209] irq: irq 253 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 125 [ 0.007222] irq: irq 254 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 126 [ 0.007233] CPU0: L2CR is 80080000 [ 0.007245] CPU0: L3CR is 8f0b0000 [478142821.172058] CPU1: L2CR was 80000 [478142821.172102] CPU1: L2CR set to 80080000 [478142821.172109] CPU1: L3CR was 0 [478142821.172269] CPU1: L3CR set to 8f0b0000 [ 0.013136] Brought up 2 CPUs [ 0.014944] NET: Registered protocol family 16 [ 0.016708] MPC7450 family performance monitor hardware support registered [ 0.016783] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.016874] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.017436] PCI: Probing PCI hardware [ 0.017660] pci 0000:00:0b.0: [106b:0034] type 0 class 0x000600 [ 0.017767] pci 0000:00:10.0: [10de:0172] type 0 class 0x000300 [ 0.017796] pci 0000:00:10.0: reg 10: [mem 0x91000000-0x91ffffff] [ 0.017812] pci 0000:00:10.0: reg 14: [mem 0x98000000-0x9fffffff pref] [ 0.017828] pci 0000:00:10.0: reg 18: [mem 0x00000000-0x0007ffff pref] [ 0.017881] pci 0000:00:10.0: reg 30: [mem 0x90000000-0x9001ffff pref] [ 0.017986] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.018602] pci 0001:10:0b.0: [106b:0035] type 0 class 0x000600 [ 0.018698] pci 0001:10:15.0: [12eb:0002] type 0 class 0x000401 [ 0.018724] pci 0001:10:15.0: reg 10: [mem 0x800c0000-0x800fffff] [ 0.018740] pci 0001:10:15.0: reg 14: [io 0x0410-0x0417] [ 0.018756] pci 0001:10:15.0: reg 18: [io 0x0400-0x0407] [ 0.018815] pci 0001:10:15.0: supports D2 [ 0.018842] pci 0001:10:17.0: [106b:0022] type 0 class 0x00ff00 [ 0.018878] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff] [ 0.018956] pci 0001:10:18.0: [106b:0019] type 0 class 0x000c03 [ 0.018976] pci 0001:10:18.0: reg 10: [mem 0x80081000-0x80081fff] [ 0.019054] pci 0001:10:19.0: [106b:0019] type 0 class 0x000c03 [ 0.019075] pci 0001:10:19.0: reg 10: [mem 0x80080000-0x80080fff] [ 0.019199] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58 [ 0.019249] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 0.019296] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.020300] pci 0002:20:0b.0: [106b:0036] type 0 class 0x000600 [ 0.020371] pci 0002:20:0d.0: [106b:0033] type 0 class 0x00ff00 [ 0.020390] pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff] [ 0.020463] pci 0002:20:0e.0: [106b:0031] type 0 class 0x000c00 [ 0.020485] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff] [ 0.020552] pci 0002:20:0e.0: supports D1 D2 [ 0.020560] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.020571] pci 0002:20:0e.0: PME# disabled [ 0.020595] pci 0002:20:0f.0: [106b:0032] type 0 class 0x000200 [ 0.020614] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff] [ 0.020662] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref] [ 0.020748] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.020784] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.020824] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.021663] PCI 0001:10 Cannot reserve Legacy IO [io 0x0000-0x0fff] [ 0.021689] pci 0000:00:10.0: BAR 2: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.021733] pci 0000:00:10.0: BAR 2: set to [mem 0xf1000000-0xf107ffff pref] (PCI address [0xf1000000-0xf107ffff]) [ 0.021776] pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff] [ 0.021785] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.021793] pci_bus 0000:00: resource 2 [mem 0x90000000-0xafffffff] [ 0.021802] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff] [ 0.021810] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff] [ 0.021819] pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff] [ 0.021828] pci_bus 0002:20: resource 0 [io 0xff7fe000-0xffffdfff] [ 0.021836] pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff] [ 0.030284] bio: create slab at 0 [ 0.031033] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.031101] vgaarb: loaded [ 0.031695] usbcore: registered new interface driver usbfs [ 0.031866] usbcore: registered new interface driver hub [ 0.032097] usbcore: registered new device driver usb [ 0.032601] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.033226] Switching to clocksource timebase [ 0.045444] NET: Registered protocol family 2 [ 0.045666] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.046703] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.049063] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.050814] TCP: Hash tables configured (established 131072 bind 65536) [ 0.050855] TCP reno registered [ 0.050887] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.050944] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.051281] NET: Registered protocol family 1 [ 0.051477] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.051672] Trying to unpack rootfs image as initramfs... [ 0.296149] Freeing initrd memory: 4901k freed [ 0.297136] Thermal assist unit not available [ 0.299020] highmem bounce pool size: 64 pages [ 0.313518] msgmni has been set to 1491 [ 0.316892] alg: No test for stdrng (krng) [ 0.341479] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 0.341541] io scheduler noop registered [ 0.341614] io scheduler cfq registered (default) [ 0.342491] Generic non-volatile memory driver v1.1 [ 0.342694] Linux agpgart interface v0.103 [ 0.342756] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 0.344312] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 0.344516] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 0.344743] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.345943] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 0.345999] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 0.346199] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 0.353173] brd: module loaded [ 0.356560] loop: module loaded [ 0.356651] MacIO PCI driver attached to Keylargo chipset [ 0.357706] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 0.358321] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 0.358344] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 0.358563] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 0.358585] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 0.358828] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 0.358849] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 0.359134] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 0.359156] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.360428] Uniform Multi-Platform E-IDE driver [ 0.360928] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002) [ 1.372312] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 1.372370] Probing IDE interface ide0... [ 1.636499] hda: IBM-IC35L060AVVA07-0, ATA DISK drive [ 2.248502] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.248678] hda: UDMA/100 mode selected [ 2.248907] ide0 at 0xf1102000-0xf1102070,0xf1102160 on irq 39 [ 3.261337] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19 [ 3.261390] Probing IDE interface ide1... [ 3.525645] hdc: QUANTUM FIREBALLP LM20.5, ATA DISK drive [ 4.137517] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.137768] hdc: UDMA/66 mode selected [ 4.138145] ide1 at 0xf10fc000-0xf10fc070,0xf10fc160 on irq 19 [ 5.150362] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20 [ 5.150412] Probing IDE interface ide2... [ 5.516546] hde: TSSTcorp CDDVDW SH-S222A, ATAPI CD/DVD-ROM drive [ 6.128545] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.128707] hde: MWDMA2 mode selected [ 6.128949] ide2 at 0xf1106000-0xf1106070,0xf1106160 on irq 20 [ 6.129327] ide-gd driver 1.18 [ 6.129425] hda: max request size: 128KiB [ 6.141594] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63 [ 6.141883] hda: cache flushes supported [ 6.147563] hda: [mac] hda1 hda2 hda3 hda4 [ 6.149163] hdc: max request size: 128KiB [ 6.158640] hdc: Host Protected Area detected. [ 6.158643] current capacity is 40130390 sectors (20546 MB) [ 6.158647] native capacity is 40132503 sectors (20547 MB) [ 6.158699] hdc: 40130390 sectors (20546 MB) w/1900KiB Cache, CHS=39811/16/63 [ 6.158732] hdc: cache flushes not supported [ 26.209641] ide-pmac lost interrupt, dma status: 8480 [ 26.209672] hdc: lost interrupt [ 26.209691] hdc: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } [ 26.209731] hdc: possibly failed opcode: 0xc8 [ 26.214679] hdc: DMA disabled [ 26.314634] ide1: reset: success [ 26.333324] hdc: [mac] hdc1 hdc2 [ 26.334271] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 26.396036] sungem_phy: PHY ID: 2060e1, addr: 0 [ 26.397564] gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:d1:a6 [ 26.397605] gem 0002:20:0f.0: eth0: Found BCM5421 PHY [ 26.398227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 26.398478] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002) [ 26.398524] ohci_hcd 0001:10:18.0: OHCI Host Controller [ 26.398849] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1 [ 26.398952] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000 [ 26.469566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 26.469595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 26.469624] usb usb1: Product: OHCI Host Controller [ 26.469656] usb usb1: Manufacturer: Linux 2.6.37-rc3 ohci_hcd [ 26.469678] usb usb1: SerialNumber: 0001:10:18.0 [ 26.470172] hub 1-0:1.0: USB hub found [ 26.470208] hub 1-0:1.0: 2 ports detected [ 26.470376] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002) [ 26.470419] ohci_hcd 0001:10:19.0: OHCI Host Controller [ 26.470678] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2 [ 26.470763] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000 [ 26.541551] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 26.541580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 26.541610] usb usb2: Product: OHCI Host Controller [ 26.541643] usb usb2: Manufacturer: Linux 2.6.37-rc3 ohci_hcd [ 26.541665] usb usb2: SerialNumber: 0001:10:19.0 [ 26.542141] hub 2-0:1.0: USB hub found [ 26.542174] hub 2-0:1.0: 2 ports detected [ 26.542474] uhci_hcd: USB Universal Host Controller Interface driver [ 26.542952] mice: PS/2 mouse device common for all mice [ 26.543223] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 26.543394] i2c /dev entries driver [ 26.544127] PowerMac i2c bus pmu 2 registered [ 26.544518] PowerMac i2c bus pmu 1 registered [ 26.544925] PowerMac i2c bus mac-io 0 registered [ 26.546226] PowerMac i2c bus uni-n 1 registered [ 26.547862] DS1775 digital thermometer [@49] [ 26.547886] Temp: 52.0 C Hyst: 70.0 C OS: 75.0 C [ 26.548724] ADM1030 fan controller [@2c] [ 26.549026] PowerMac i2c bus uni-n 0 registered [ 26.549620] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 26.555152] usbcore: registered new interface driver usbhid [ 26.555184] usbhid: USB HID core driver [ 26.555203] zram: num_devices not specified. Using default: 1 [ 26.555224] zram: Creating 1 devices ... [ 26.555828] ALSA device list: [ 26.555849] No soundcards found. [ 26.556932] TCP cubic registered [ 26.556956] NET: Registered protocol family 17 [ 26.557579] registered taskstats version 1 [ 26.558203] input: PMU as /devices/virtual/input/input0 [ 26.558697] rtc-generic rtc-generic: setting system clock to 2010-12-05 20:21:53 UTC (1291580513) [ 26.558855] Freeing unused kernel memory: 240k init [ 26.854663] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 26.990777] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 [ 26.990831] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 26.990857] usb 2-1: Product: USB2.0 Hub [ 26.992786] hub 2-1:1.0: USB hub found [ 26.994716] hub 2-1:1.0: 4 ports detected [ 27.192344] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002) [ 27.195147] ide-cd driver 5.00 [ 27.199367] ide-cd: hde: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 27.199448] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 27.247220] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0 [ 27.286693] usb 2-1.1: new full speed USB device using ohci_hcd and address 3 [ 27.377708] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0608 [ 27.377761] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 27.377791] usb 2-1.1: Product: USB2.0 Hub [ 27.379873] hub 2-1.1:1.0: USB hub found [ 27.381683] hub 2-1.1:1.0: 4 ports detected [ 27.463702] usb 2-1.2: new low speed USB device using ohci_hcd and address 4 [ 27.567695] usb 2-1.2: New USB device found, idVendor=04d9, idProduct=0022 [ 27.567750] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 27.567780] usb 2-1.2: Product: USB Keyboard [ 27.581281] input: USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1 [ 27.581797] generic-usb 0003:04D9:0022.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0001:10:19.0-1.2/input0 [ 27.602971] input: USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input2 [ 27.603366] generic-usb 0003:04D9:0022.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0001:10:19.0-1.2/input1 [ 27.674694] usb 2-1.1.2: new low speed USB device using ohci_hcd and address 5 [ 27.748949] firewire_core: created device fw0: GUID 000393fffeabd1a6, S400 [ 27.770681] usb 2-1.1.2: New USB device found, idVendor=0458, idProduct=002e [ 27.770720] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 27.770751] usb 2-1.1.2: Product: NetScroll+ Traveler [ 27.770772] usb 2-1.1.2: Manufacturer: KYE [ 27.784046] input: KYE NetScroll+ Traveler as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input3 [ 27.784634] generic-usb 0003:0458:002E.0003: input,hidraw2: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0001:10:19.0-1.1.2/input0 [ 27.853693] usb 2-1.1.4: new low speed USB device using ohci_hcd and address 6 [ 27.952699] usb 2-1.1.4: New USB device found, idVendor=0766, idProduct=0204 [ 27.952737] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 27.952767] usb 2-1.1.4: Product: USB IR Combo Device [ 27.952788] usb 2-1.1.4: Manufacturer: TopSeed Tech Corp. [ 27.968122] input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input4 [ 27.968601] topseed 0003:0766:0204.0004: input,hidraw3: USB HID v1.00 Keyboard [TopSeed Tech Corp. USB IR Combo Device ] on usb-0001:10:19.0-1.1.4/input0 [ 27.983810] input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.1/input/input5 [ 27.985247] topseed 0003:0766:0204.0005: input,hiddev0,hidraw4: USB HID v1.00 Mouse [TopSeed Tech Corp. USB IR Combo Device ] on usb-0001:10:19.0-1.1.4/input1 [ 28.802063] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 34.553003] CPU-temp: 52.2 C, Case: 30.0 C, Fan: 0 (tuned -11) [ 43.203147] EXT3-fs: barriers not enabled [ 43.210488] EXT3-fs (dm-1): mounted filesystem with writeback data mode [ 43.211885] kjournald starting. Commit interval 5 seconds [ 45.570960] udev[742]: starting version 164 [ 46.634945] [drm] Initialized drm 1.1.0 20060810 [ 47.217976] [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x017200a5) [ 47.218195] [drm] nouveau 0000:00:10.0: OF bios successfully copied (2701 bytes) [ 47.218420] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN [ 47.250382] au8830 0001:10:15.0: enabling device (0004 -> 0007) [ 47.250519] Vortex: init.... [ 47.271240] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [ 47.271300] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM [ 47.411521] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [ 47.411568] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM [ 47.411681] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 47.411704] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from ACPI [ 47.411733] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 47.411756] [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN [ 47.469021] [drm] nouveau 0000:00:10.0: BMP BIOS found [ 47.469067] [drm] nouveau 0000:00:10.0: BMP version 5.21 [ 47.469090] [drm] nouveau 0000:00:10.0: Bios version 04.17.00.56 [ 47.469116] [drm] nouveau 0000:00:10.0: No output data (DCB) found in BIOS [ 47.469779] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x0149 [ 47.469878] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x045F [ 47.490929] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x0264 [ 47.511934] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x09EE [ 47.511992] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x041F [ 47.595116] done. [ 47.829981] [drm] nouveau 0000:00:10.0: 1 available performance level(s) [ 47.830037] [drm] nouveau 0000:00:10.0: 0: memory 400MHz [ 47.830079] [drm] nouveau 0000:00:10.0: c: memory 351MHz core 270MHz [ 47.830137] [drm] nouveau 0000:00:10.0: Detected 32MiB VRAM [ 47.830378] [TTM] Zone kernel: Available graphics memory: 381838 kiB. [ 47.830426] [TTM] Zone highmem: Available graphics memory: 775054 kiB. [ 47.830449] [TTM] Initializing pool allocator. [ 47.834716] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture) [ 47.836635] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0 [ 47.836947] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0 [ 47.837013] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on tmds encoder (output 0) [ 47.837061] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 1) [ 47.965469] [drm] nouveau 0000:00:10.0: allocated 1280x1024 fb: 0x49000, bo ef1a0400 [ 48.178087] [drm] nouveau 0000:00:10.0: Pixel clock comparison table not found [ 48.178108] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on tmds encoder (output 0) [ 48.178122] [drm] nouveau 0000:00:10.0: Output DVI-I-1 is running on CRTC 0 using output B [ 48.178179] Console: switching to colour frame buffer device 160x64 [ 48.180101] fb0: nouveaufb frame buffer device [ 48.180110] drm: registered panic notifier [ 48.180140] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:10.0 on minor 0 [ 50.758994] EXT3-fs (dm-1): using internal journal [ 51.230051] SCSI subsystem initialized [ 51.427702] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 51.427776] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 51.434000] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 51.434040] irq: irq 60 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 60 [ 51.887402] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input6 [ 52.173186] Adding 1048572k swap on /dev/mapper/power--group-swap_1. Priority:-1 extents:1 across:1048572k [ 53.928139] EXT3-fs: barriers not enabled [ 53.942211] kjournald starting. Commit interval 5 seconds [ 53.942367] EXT3-fs (dm-3): using internal journal [ 53.942421] EXT3-fs (dm-3): mounted filesystem with writeback data mode [ 53.983348] REISERFS (device dm-4): found reiserfs format "3.6" with standard journal [ 53.984773] REISERFS (device dm-4): using ordered data mode [ 53.997640] REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 54.002839] REISERFS (device dm-4): checking transaction log (dm-4) [ 54.044355] REISERFS (device dm-4): Using r5 hash to sort names [ 54.454952] EXT4-fs (hdc2): barriers disabled [ 54.477977] EXT4-fs (hdc2): mounted filesystem with writeback data mode. Opts: barrier=0,data=writeback [ 56.782515] fuse init (API version 7.15) [ 58.433540] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 58.434939] gem 0002:20:0f.0: eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)