[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000) [ 0.000000] Linux version 2.6.37-rc5 (andrey@power-debian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Fri Dec 10 00:39:48 MSK 2010 [ 0.000000] Found initrd at 0xc1b00000:0xc1fca000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000 [ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=1392, gen1=1391 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal empty [ 0.000000] HighMem 0x00030000 -> 0x00060000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00060000 [ 0.000000] On node 0 totalpages: 393216 [ 0.000000] free_area_init_node: node 0, pgdat c04c9ae0, node_mem_map c0531000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1536 pages used for memmap [ 0.000000] HighMem zone: 195072 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 7 pages/cpu @c113c000 s8064 r8192 d12416 u32768 [ 0.000000] pcpu-alloc: s8064 r8192 d12416 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144 [ 0.000000] Kernel command line: root=/dev/mapper/power--group-root ro video=offb:off [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 786432k [ 0.000000] Memory: 1544964k/1572864k available (4768k kernel code, 27900k reserved, 188k data, 307k bss, 240k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffbf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfdcda000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfdcda000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:128 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55 [ 0.000000] GMT Delta read from XPRAM: 240 minutes, DST: on [ 0.000000] time_init: decrementer frequency = 33.304672 MHz [ 0.000000] time_init: processor frequency = 866.666664 MHz [ 0.000000] clocksource: timebase mult[781a6fe] shift[22] registered [ 0.000000] clockevent: decrementer mult[886a7ad] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 0.000000] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 0.001285] pid_max: default: 32768 minimum: 301 [ 0.001475] Mount-cache hash table entries: 512 [ 0.002012] device-tree: Duplicate name in /cpus/PowerPC,G4@0/l2-cache, renamed to "l2-cache#1" [ 0.002131] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.002285] device-tree: Duplicate name in /cpus/PowerPC,G4@1/l2-cache, renamed to "l2-cache#1" [ 0.002396] device-tree: Duplicate name in /cpus/PowerPC,G4@1, renamed to "l2-cache#1" [ 0.006796] PowerMac SMP probe found 2 cpus [ 0.006902] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.006931] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.006955] channel 0 bus [ 0.006969] channel 1 bus [ 0.006999] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.007016] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.007039] channel 0 bus [ 0.007058] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.007079] channel 1 bus [ 0.007093] channel 2 bus [ 0.007121] pmf: no parser for command 17 ! [ 0.007189] Processor timebase sync using GPIO 0x73 [ 0.007206] mpic: requesting IPIs... [ 0.007223] irq: irq 251 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 123 [ 0.007239] irq: irq 252 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 124 [ 0.007252] irq: irq 253 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 125 [ 0.007265] irq: irq 254 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 126 [ 0.007276] CPU0: L2CR is 80080000 [ 0.007288] CPU0: L3CR is 8f0b0000 [476246919.264614] CPU1: L2CR was 80000 [476246919.264659] CPU1: L2CR set to 80080000 [476246919.264664] CPU1: L3CR was 0 [476246919.264825] CPU1: L3CR set to 8f0b0000 [ 0.013143] Brought up 2 CPUs [ 0.014959] NET: Registered protocol family 16 [ 0.016767] MPC7450 family performance monitor hardware support registered [ 0.016856] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.016930] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.017489] PCI: Probing PCI hardware [ 0.017713] pci 0000:00:0b.0: [106b:0034] type 0 class 0x000600 [ 0.017819] pci 0000:00:10.0: [10de:0172] type 0 class 0x000300 [ 0.017848] pci 0000:00:10.0: reg 10: [mem 0x91000000-0x91ffffff] [ 0.017882] pci 0000:00:10.0: reg 14: [mem 0x98000000-0x9fffffff pref] [ 0.017897] pci 0000:00:10.0: reg 18: [mem 0x00000000-0x0007ffff pref] [ 0.017934] pci 0000:00:10.0: reg 30: [mem 0x90000000-0x9001ffff pref] [ 0.018040] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.018622] pci 0001:10:0b.0: [106b:0035] type 0 class 0x000600 [ 0.018717] pci 0001:10:15.0: [12eb:0002] type 0 class 0x000401 [ 0.018742] pci 0001:10:15.0: reg 10: [mem 0x800c0000-0x800fffff] [ 0.018758] pci 0001:10:15.0: reg 14: [io 0x0410-0x0417] [ 0.018774] pci 0001:10:15.0: reg 18: [io 0x0400-0x0407] [ 0.018833] pci 0001:10:15.0: supports D2 [ 0.018860] pci 0001:10:17.0: [106b:0022] type 0 class 0x00ff00 [ 0.018896] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff] [ 0.018974] pci 0001:10:18.0: [106b:0019] type 0 class 0x000c03 [ 0.018994] pci 0001:10:18.0: reg 10: [mem 0x80081000-0x80081fff] [ 0.019073] pci 0001:10:19.0: [106b:0019] type 0 class 0x000c03 [ 0.019093] pci 0001:10:19.0: reg 10: [mem 0x80080000-0x80080fff] [ 0.019218] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58 [ 0.019268] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 0.019315] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.020315] pci 0002:20:0b.0: [106b:0036] type 0 class 0x000600 [ 0.020387] pci 0002:20:0d.0: [106b:0033] type 0 class 0x00ff00 [ 0.020406] pci 0002:20:0d.0: reg 10: [mem 0xf5004000-0xf5007fff] [ 0.020478] pci 0002:20:0e.0: [106b:0031] type 0 class 0x000c00 [ 0.020500] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff] [ 0.020567] pci 0002:20:0e.0: supports D1 D2 [ 0.020575] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.020585] pci 0002:20:0e.0: PME# disabled [ 0.020609] pci 0002:20:0f.0: [106b:0032] type 0 class 0x000200 [ 0.020628] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff] [ 0.020676] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref] [ 0.020760] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.020796] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.020836] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.021673] PCI 0001:10 Cannot reserve Legacy IO [io 0x0000-0x0fff] [ 0.021700] pci 0000:00:10.0: BAR 2: assigned [mem 0xf1000000-0xf107ffff pref] [ 0.021744] pci 0000:00:10.0: BAR 2: set to [mem 0xf1000000-0xf107ffff pref] (PCI address [0xf1000000-0xf107ffff]) [ 0.021787] pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff] [ 0.021795] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.021804] pci_bus 0000:00: resource 2 [mem 0x90000000-0xafffffff] [ 0.021813] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff] [ 0.021821] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff] [ 0.021830] pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff] [ 0.021838] pci_bus 0002:20: resource 0 [io 0xff7fe000-0xffffdfff] [ 0.021847] pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff] [ 0.030513] bio: create slab at 0 [ 0.031259] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.031327] vgaarb: loaded [ 0.031907] usbcore: registered new interface driver usbfs [ 0.032099] usbcore: registered new interface driver hub [ 0.032424] usbcore: registered new device driver usb [ 0.032866] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.033509] Switching to clocksource timebase [ 0.045878] NET: Registered protocol family 2 [ 0.046101] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.047134] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.049486] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.051237] TCP: Hash tables configured (established 131072 bind 65536) [ 0.051278] TCP reno registered [ 0.051310] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.051368] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.051766] NET: Registered protocol family 1 [ 0.051901] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.052093] Trying to unpack rootfs image as initramfs... [ 0.294259] Freeing initrd memory: 4904k freed [ 0.295242] Thermal assist unit not available [ 0.297135] highmem bounce pool size: 64 pages [ 0.311481] msgmni has been set to 1491 [ 0.314848] alg: No test for stdrng (krng) [ 0.339283] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 0.339346] io scheduler noop registered [ 0.339418] io scheduler cfq registered (default) [ 0.340287] Generic non-volatile memory driver v1.1 [ 0.340502] Linux agpgart interface v0.103 [ 0.340562] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 0.342120] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 0.342330] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 0.342556] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343850] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 0.343905] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 0.344103] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 0.351041] brd: module loaded [ 0.354487] loop: module loaded [ 0.354605] MacIO PCI driver attached to Keylargo chipset [ 0.355719] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 0.356311] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 0.356334] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 0.356546] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 0.356589] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 0.356829] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 0.356851] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 0.357140] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 0.357161] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.358419] Uniform Multi-Platform E-IDE driver [ 0.358947] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002) [ 1.370591] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 1.370648] Probing IDE interface ide0... [ 1.634776] hda: IBM-IC35L060AVVA07-0, ATA DISK drive [ 2.246776] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.246953] hda: UDMA/100 mode selected [ 2.247180] ide0 at 0xf1102000-0xf1102070,0xf1102160 on irq 39 [ 3.259611] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19 [ 3.259664] Probing IDE interface ide1... [ 3.523918] hdc: QUANTUM FIREBALLP LM20.5, ATA DISK drive [ 4.135787] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.136039] hdc: UDMA/66 mode selected [ 4.136415] ide1 at 0xf10fc000-0xf10fc070,0xf10fc160 on irq 19 [ 5.148627] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20 [ 5.148676] Probing IDE interface ide2... [ 5.514811] hde: TSSTcorp CDDVDW SH-S222A, ATAPI CD/DVD-ROM drive [ 6.126799] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.127050] hde: MWDMA2 mode selected [ 6.127293] ide2 at 0xf1106000-0xf1106070,0xf1106160 on irq 20 [ 6.127683] ide-gd driver 1.18 [ 6.127761] hda: max request size: 128KiB [ 6.138842] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63 [ 6.139129] hda: cache flushes supported [ 6.147143] hda: [mac] hda1 hda2 hda3 hda4 [ 6.148750] hdc: max request size: 128KiB [ 6.157926] hdc: Host Protected Area detected. [ 6.157930] current capacity is 40130390 sectors (20546 MB) [ 6.157933] native capacity is 40132503 sectors (20547 MB) [ 6.158000] hdc: 40130390 sectors (20546 MB) w/1900KiB Cache, CHS=39811/16/63 [ 6.158032] hdc: cache flushes not supported [ 26.209835] ide-pmac lost interrupt, dma status: 8480 [ 26.209863] hdc: lost interrupt [ 26.209883] hdc: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } [ 26.209923] hdc: possibly failed opcode: 0xc8 [ 26.214869] hdc: DMA disabled [ 26.259829] ide1: reset: success [ 26.277372] hdc: [mac] hdc1 hdc2 [ 26.278326] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 26.340229] sungem_phy: PHY ID: 2060e1, addr: 0 [ 26.341758] gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:d1:a6 [ 26.341800] gem 0002:20:0f.0: eth0: Found BCM5421 PHY [ 26.342455] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 26.342707] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002) [ 26.342752] ohci_hcd 0001:10:18.0: OHCI Host Controller [ 26.343081] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1 [ 26.343182] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000 [ 26.413740] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 26.413769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 26.413799] usb usb1: Product: OHCI Host Controller [ 26.413819] usb usb1: Manufacturer: Linux 2.6.37-rc5 ohci_hcd [ 26.413853] usb usb1: SerialNumber: 0001:10:18.0 [ 26.414370] hub 1-0:1.0: USB hub found [ 26.414407] hub 1-0:1.0: 2 ports detected [ 26.414554] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002) [ 26.414594] ohci_hcd 0001:10:19.0: OHCI Host Controller [ 26.414857] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2 [ 26.414943] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000 [ 26.485735] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 26.485763] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 26.485793] usb usb2: Product: OHCI Host Controller [ 26.485813] usb usb2: Manufacturer: Linux 2.6.37-rc5 ohci_hcd [ 26.485846] usb usb2: SerialNumber: 0001:10:19.0 [ 26.486343] hub 2-0:1.0: USB hub found [ 26.486376] hub 2-0:1.0: 2 ports detected [ 26.486649] uhci_hcd: USB Universal Host Controller Interface driver [ 26.487144] mice: PS/2 mouse device common for all mice [ 26.487439] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 26.487611] i2c /dev entries driver [ 26.488340] PowerMac i2c bus pmu 2 registered [ 26.488712] PowerMac i2c bus pmu 1 registered [ 26.489105] PowerMac i2c bus mac-io 0 registered [ 26.490462] PowerMac i2c bus uni-n 1 registered [ 26.492010] DS1775 digital thermometer [@49] [ 26.492035] Temp: 53.4 C Hyst: 70.0 C OS: 75.0 C [ 26.492840] ADM1030 fan controller [@2c] [ 26.493160] PowerMac i2c bus uni-n 0 registered [ 26.493752] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 26.499401] usbcore: registered new interface driver usbhid [ 26.499434] usbhid: USB HID core driver [ 26.499454] zram: num_devices not specified. Using default: 1 [ 26.499475] zram: Creating 1 devices ... [ 26.500156] ALSA device list: [ 26.500178] No soundcards found. [ 26.501181] TCP cubic registered [ 26.501205] NET: Registered protocol family 17 [ 26.501929] registered taskstats version 1 [ 26.502529] input: PMU as /devices/virtual/input/input0 [ 26.503045] rtc-generic rtc-generic: setting system clock to 2010-12-09 21:55:28 UTC (1291931728) [ 26.503203] Freeing unused kernel memory: 240k init [ 26.798851] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 26.934911] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 [ 26.934965] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 26.934991] usb 2-1: Product: USB2.0 Hub [ 26.937208] hub 2-1:1.0: USB hub found [ 26.938946] hub 2-1:1.0: 4 ports detected [ 27.134119] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002) [ 27.146735] ide-cd driver 5.00 [ 27.148920] ide-cd: hde: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 27.148975] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 27.185055] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0 [ 27.230884] usb 2-1.1: new full speed USB device using ohci_hcd and address 3 [ 27.321888] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0608 [ 27.321939] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 27.321969] usb 2-1.1: Product: USB2.0 Hub [ 27.323968] hub 2-1.1:1.0: USB hub found [ 27.325867] hub 2-1.1:1.0: 4 ports detected [ 27.407889] usb 2-1.2: new low speed USB device using ohci_hcd and address 4 [ 27.511890] usb 2-1.2: New USB device found, idVendor=04d9, idProduct=0022 [ 27.511930] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 27.511960] usb 2-1.2: Product: USB Keyboard [ 27.525291] input: USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1 [ 27.525720] generic-usb 0003:04D9:0022.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0001:10:19.0-1.2/input0 [ 27.547119] input: USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input2 [ 27.547512] generic-usb 0003:04D9:0022.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0001:10:19.0-1.2/input1 [ 27.618895] usb 2-1.1.2: new low speed USB device using ohci_hcd and address 5 [ 27.687130] firewire_core: created device fw0: GUID 000393fffeabd1a6, S400 [ 27.713864] usb 2-1.1.2: New USB device found, idVendor=0458, idProduct=002e [ 27.713906] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 27.713937] usb 2-1.1.2: Product: NetScroll+ Traveler [ 27.713957] usb 2-1.1.2: Manufacturer: KYE [ 27.727133] input: KYE NetScroll+ Traveler as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input3 [ 27.727683] generic-usb 0003:0458:002E.0003: input,hidraw2: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0001:10:19.0-1.1.2/input0 [ 27.796881] usb 2-1.1.4: new low speed USB device using ohci_hcd and address 6 [ 27.895862] usb 2-1.1.4: New USB device found, idVendor=0766, idProduct=0204 [ 27.895895] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 27.895926] usb 2-1.1.4: Product: USB IR Combo Device [ 27.895946] usb 2-1.1.4: Manufacturer: TopSeed Tech Corp. [ 27.911153] input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input4 [ 27.911592] topseed 0003:0766:0204.0004: input,hidraw3: USB HID v1.00 Keyboard [TopSeed Tech Corp. USB IR Combo Device ] on usb-0001:10:19.0-1.1.4/input0 [ 27.925922] input: TopSeed Tech Corp. USB IR Combo Device as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.1/input/input5 [ 27.926936] topseed 0003:0766:0204.0005: input,hiddev0,hidraw4: USB HID v1.00 Mouse [TopSeed Tech Corp. USB IR Combo Device ] on usb-0001:10:19.0-1.1.4/input1 [ 28.746266] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 34.497147] CPU-temp: 53.6 C, Case: 31.6 C, Fan: 0 (tuned -11) [ 45.872291] EXT3-fs: barriers not enabled [ 45.879616] kjournald starting. Commit interval 5 seconds [ 45.879686] EXT3-fs (dm-1): mounted filesystem with writeback data mode [ 48.356916] udev[739]: starting version 164 [ 49.326609] [drm] Initialized drm 1.1.0 20060810 [ 49.898397] [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x017200a5) [ 49.898585] [drm] nouveau 0000:00:10.0: OF bios successfully copied (2701 bytes) [ 49.898707] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN [ 49.957849] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [ 49.957897] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM [ 50.088469] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [ 50.088505] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM [ 50.088612] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 50.088635] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from ACPI [ 50.088664] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 50.088687] [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN [ 50.099302] au8830 0001:10:15.0: enabling device (0004 -> 0007) [ 50.099440] Vortex: init.... [ 50.133265] [drm] nouveau 0000:00:10.0: BMP BIOS found [ 50.133308] [drm] nouveau 0000:00:10.0: BMP version 5.21 [ 50.133332] [drm] nouveau 0000:00:10.0: Bios version 04.17.00.56 [ 50.133357] [drm] nouveau 0000:00:10.0: No output data (DCB) found in BIOS [ 50.133957] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x0149 [ 50.134072] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x045F [ 50.155083] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x0264 [ 50.177087] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x09EE [ 50.177154] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x041F [ 50.431218] done. [ 50.492130] [drm] nouveau 0000:00:10.0: 1 available performance level(s) [ 50.492189] [drm] nouveau 0000:00:10.0: 0: memory 400MHz [ 50.492231] [drm] nouveau 0000:00:10.0: c: memory 351MHz core 270MHz [ 50.492283] [drm] nouveau 0000:00:10.0: Detected 32MiB VRAM [ 50.492516] [TTM] Zone kernel: Available graphics memory: 381838 kiB. [ 50.492542] [TTM] Zone highmem: Available graphics memory: 775054 kiB. [ 50.492566] [TTM] Initializing pool allocator. [ 50.497245] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture) [ 50.498958] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0 [ 50.499452] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0 [ 50.499522] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on tmds encoder (output 0) [ 50.499563] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 1) [ 50.642994] [drm] nouveau 0000:00:10.0: allocated 1280x1024 fb: 0x49000, bo c1adc400 [ 50.855126] [drm] nouveau 0000:00:10.0: Pixel clock comparison table not found [ 50.906107] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on tmds encoder (output 0) [ 50.906123] [drm] nouveau 0000:00:10.0: Output DVI-I-1 is running on CRTC 0 using output B [ 50.906166] Console: switching to colour frame buffer device 160x64 [ 50.908036] fb0: nouveaufb frame buffer device [ 50.908045] drm: registered panic notifier [ 50.908082] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:10.0 on minor 0 [ 53.303331] EXT3-fs (dm-1): using internal journal [ 53.821807] SCSI subsystem initialized [ 53.956985] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 53.957058] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 53.962946] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 53.962985] irq: irq 60 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 60 [ 54.415770] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input6 [ 54.691161] Adding 1048572k swap on /dev/mapper/power--group-swap_1. Priority:-1 extents:1 across:1048572k [ 56.430769] EXT3-fs: barriers not enabled [ 56.444846] kjournald starting. Commit interval 5 seconds [ 56.445033] EXT3-fs (dm-3): using internal journal [ 56.445089] EXT3-fs (dm-3): mounted filesystem with writeback data mode [ 56.485433] REISERFS (device dm-4): found reiserfs format "3.6" with standard journal [ 56.486891] REISERFS (device dm-4): using ordered data mode [ 56.491932] REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 56.497192] REISERFS (device dm-4): checking transaction log (dm-4) [ 56.546991] REISERFS (device dm-4): Using r5 hash to sort names [ 56.967170] EXT4-fs (hdc2): barriers disabled [ 56.977410] EXT4-fs (hdc2): mounted filesystem with writeback data mode. Opts: barrier=0,data=writeback [ 59.214246] fuse init (API version 7.15) [ 60.483531] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 60.484953] gem 0002:20:0f.0: eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)